at86rf230: add default channel settings

This patch sets the reset state channels accoridng at86rf2xx datasheets.
We don't need to set the default page here which is zero on all chips.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 624080d..f68ebba 100644 (file)
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -1427,6 +1427,7 @@ at86rf230_detect_device(struct at86rf230_local *lp)
                chip = "at86rf231";
                lp->data = &at86rf231_data;
                lp->hw->phy->channels_supported[0] = 0x7FFF800;
+               lp->hw->phy->current_channel = 11;
                break;
        case 7:
                chip = "at86rf212";
@@ -1435,6 +1436,7 @@ at86rf230_detect_device(struct at86rf230_local *lp)
                        lp->hw->flags |= IEEE802154_HW_LBT;
                        lp->hw->phy->channels_supported[0] = 0x00007FF;
                        lp->hw->phy->channels_supported[2] = 0x00007FF;
+                       lp->hw->phy->current_channel = 5;
                } else {
                        rc = -ENOTSUPP;
                }
@@ -1443,6 +1445,7 @@ at86rf230_detect_device(struct at86rf230_local *lp)
                chip = "at86rf233";
                lp->data = &at86rf233_data;
                lp->hw->phy->channels_supported[0] = 0x7FFF800;
+               lp->hw->phy->current_channel = 13;
                break;
        default:
                chip = "unkown";