ARM: BCM5301X: Add DT for Luxul XAP-1510

Luxul XAP-1510 is an AP device based on BCM4708 SoC with 2 x BCM4360
chipsets on PCB connected using PCIe.

Signed-off-by: Dan Haab <dhaab@luxul.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 103c2cf..fd4e299 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
        bcm4708-asus-rt-ac56u.dtb \
        bcm4708-asus-rt-ac68u.dtb \
        bcm4708-buffalo-wzr-1750dhp.dtb \
+       bcm4708-luxul-xap-1510.dtb \
        bcm4708-luxul-xwc-1000.dtb \
        bcm4708-netgear-r6250.dtb \
        bcm4708-netgear-r6300-v2.dtb \

diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
new file mode 100644 (file)
index 0000000..35e6ed6
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+       compatible = "luxul,xap-1510v1", "brcm,bcm4708";
+       model = "Luxul XAP-1510 V1";
+
+       chosen {
+               bootargs = "console=ttyS0,115200 earlycon";
+       };
+
+       memory {
+               reg = <0x00000000 0x08000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               5ghz {
+                       label = "bcm53xx:blue:5ghz";
+                       gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+               };
+
+               2ghz {
+                       label = "bcm53xx:blue:2ghz";
+                       gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+               };
+
+               status {
+                       label = "bcm53xx:green:status";
+                       gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "timer";
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               restart {
+                       label = "Reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&spi_nor {
+       status = "okay";
+};