From: Javier Martinez Canillas Date: Thu, 20 Jun 2013 14:42:30 +0000 (+0200) Subject: ARM: dts: omap3-igep: add pinmux node for GPIO LED configuration X-Git-Tag: v3.13-rc1~156^2~6^2~3^2~56 X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=00964a90728d752abe61ad134dac8c13491c3595;p=uclinux-h8%2Flinux.git ARM: dts: omap3-igep: add pinmux node for GPIO LED configuration IGEP boards have a number of LED connected to OMAP or TWL GPIO lines. The actual wiring is different on each board so each board DT has need to configure the mux correctly. Even though it works with the current DT, the kernel complains with: [2.305023] leds-gpio leds.18: pins are not configured from the driver Add an empty pinmux_leds_pins pinctrl child node so boards can override with the correct mux configuration and not depend on default values for the GPIO LEDs to work. Signed-off-by: Javier Martinez Canillas Signed-off-by: Benoit Cousson --- diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 2326d11462a5..0f92224dc4fc 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -77,6 +77,8 @@ 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ >; }; + + leds_pins: pinmux_leds_pins { }; }; &i2c1 {