From: Markus Armbruster Date: Thu, 24 Aug 2017 19:13:57 +0000 (+0200) Subject: qapi-schema: Collect run state stuff in qapi/run-state.json X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=0e201d34;p=qmiga%2Fqemu.git qapi-schema: Collect run state stuff in qapi/run-state.json Cc: Paolo Bonzini Signed-off-by: Markus Armbruster Message-Id: <1503602048-12268-6-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau --- diff --git a/MAINTAINERS b/MAINTAINERS index fb90a19b3d..289ea8c575 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1338,6 +1338,7 @@ F: cpus.c F: util/main-loop.c F: util/qemu-timer.c F: vl.c +F: qapi/run-state.json Human Monitor (HMP) M: Dr. David Alan Gilbert diff --git a/Makefile b/Makefile index ca4a03c376..d3ba41afb8 100644 --- a/Makefile +++ b/Makefile @@ -413,6 +413,7 @@ qapi-modules = $(SRC_PATH)/qapi-schema.json $(SRC_PATH)/qapi/common.json \ $(SRC_PATH)/qapi/crypto.json \ $(SRC_PATH)/qapi/event.json $(SRC_PATH)/qapi/introspect.json \ $(SRC_PATH)/qapi/rocker.json \ + $(SRC_PATH)/qapi/run-state.json \ $(SRC_PATH)/qapi/sockets.json \ $(SRC_PATH)/qapi/trace.json diff --git a/qapi-schema.json b/qapi-schema.json index d69b6da5ec..f42d61b664 100644 --- a/qapi-schema.json +++ b/qapi-schema.json @@ -80,6 +80,7 @@ { 'include': 'qapi/common.json' } { 'include': 'qapi/sockets.json' } +{ 'include': 'qapi/run-state.json' } { 'include': 'qapi/crypto.json' } { 'include': 'qapi/block.json' } { 'include': 'qapi/rocker.json' } @@ -243,94 +244,6 @@ { 'command': 'query-kvm', 'returns': 'KvmInfo' } ## -# @RunState: -# -# An enumeration of VM run states. -# -# @debug: QEMU is running on a debugger -# -# @finish-migrate: guest is paused to finish the migration process -# -# @inmigrate: guest is paused waiting for an incoming migration. Note -# that this state does not tell whether the machine will start at the -# end of the migration. This depends on the command-line -S option and -# any invocation of 'stop' or 'cont' that has happened since QEMU was -# started. -# -# @internal-error: An internal error that prevents further guest execution -# has occurred -# -# @io-error: the last IOP has failed and the device is configured to pause -# on I/O errors -# -# @paused: guest has been paused via the 'stop' command -# -# @postmigrate: guest is paused following a successful 'migrate' -# -# @prelaunch: QEMU was started with -S and guest has not started -# -# @restore-vm: guest is paused to restore VM state -# -# @running: guest is actively running -# -# @save-vm: guest is paused to save the VM state -# -# @shutdown: guest is shut down (and -no-shutdown is in use) -# -# @suspended: guest is suspended (ACPI S3) -# -# @watchdog: the watchdog action is configured to pause and has been triggered -# -# @guest-panicked: guest has been panicked as a result of guest OS panic -# -# @colo: guest is paused to save/restore VM state under colo checkpoint, -# VM can not get into this state unless colo capability is enabled -# for migration. (since 2.8) -## -{ 'enum': 'RunState', - 'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused', - 'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm', - 'running', 'save-vm', 'shutdown', 'suspended', 'watchdog', - 'guest-panicked', 'colo' ] } - -## -# @StatusInfo: -# -# Information about VCPU run state -# -# @running: true if all VCPUs are runnable, false if not runnable -# -# @singlestep: true if VCPUs are in single-step mode -# -# @status: the virtual machine @RunState -# -# Since: 0.14.0 -# -# Notes: @singlestep is enabled through the GDB stub -## -{ 'struct': 'StatusInfo', - 'data': {'running': 'bool', 'singlestep': 'bool', 'status': 'RunState'} } - -## -# @query-status: -# -# Query the run status of all VCPUs -# -# Returns: @StatusInfo reflecting all VCPUs -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "query-status" } -# <- { "return": { "running": true, -# "singlestep": false, -# "status": "running" } } -# -## -{ 'command': 'query-status', 'returns': 'StatusInfo' } - -## # @UuidInfo: # # Guest UUID information (Universally Unique Identifier). @@ -6017,34 +5930,6 @@ { 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] } ## -# @WatchdogExpirationAction: -# -# An enumeration of the actions taken when the watchdog device's timer is -# expired -# -# @reset: system resets -# -# @shutdown: system shutdown, note that it is similar to @powerdown, which -# tries to set to system status and notify guest -# -# @poweroff: system poweroff, the emulator program exits -# -# @pause: system pauses, similar to @stop -# -# @debug: system enters debug state -# -# @none: nothing is done -# -# @inject-nmi: a non-maskable interrupt is injected into the first VCPU (all -# VCPUS on x86) (since 2.4) -# -# Since: 2.1 -## -{ 'enum': 'WatchdogExpirationAction', - 'data': [ 'reset', 'shutdown', 'poweroff', 'pause', 'debug', 'none', - 'inject-nmi' ] } - -## # @IoOperationType: # # An enumeration of the I/O operation types @@ -6059,54 +5944,6 @@ 'data': [ 'read', 'write' ] } ## -# @GuestPanicAction: -# -# An enumeration of the actions taken when guest OS panic is detected -# -# @pause: system pauses -# -# Since: 2.1 (poweroff since 2.8) -## -{ 'enum': 'GuestPanicAction', - 'data': [ 'pause', 'poweroff' ] } - -## -# @GuestPanicInformationType: -# -# An enumeration of the guest panic information types -# -# Since: 2.9 -## -{ 'enum': 'GuestPanicInformationType', - 'data': [ 'hyper-v'] } - -## -# @GuestPanicInformation: -# -# Information about a guest panic -# -# Since: 2.9 -## -{'union': 'GuestPanicInformation', - 'base': {'type': 'GuestPanicInformationType'}, - 'discriminator': 'type', - 'data': { 'hyper-v': 'GuestPanicInformationHyperV' } } - -## -# @GuestPanicInformationHyperV: -# -# Hyper-V specific guest panic information (HV crash MSRs) -# -# Since: 2.9 -## -{'struct': 'GuestPanicInformationHyperV', - 'data': { 'arg1': 'uint64', - 'arg2': 'uint64', - 'arg3': 'uint64', - 'arg4': 'uint64', - 'arg5': 'uint64' } } - -## # @rtc-reset-reinjection: # # This command will reset the RTC interrupt reinjection backlog. diff --git a/qapi/event.json b/qapi/event.json index 6d22b025cc..9c6126d278 100644 --- a/qapi/event.json +++ b/qapi/event.json @@ -5,144 +5,6 @@ ## ## -# @SHUTDOWN: -# -# Emitted when the virtual machine has shut down, indicating that qemu is -# about to exit. -# -# @guest: If true, the shutdown was triggered by a guest request (such as -# a guest-initiated ACPI shutdown request or other hardware-specific action) -# rather than a host request (such as sending qemu a SIGINT). (since 2.10) -# -# Note: If the command-line option "-no-shutdown" has been specified, qemu will -# not exit, and a STOP event will eventually follow the SHUTDOWN event -# -# Since: 0.12.0 -# -# Example: -# -# <- { "event": "SHUTDOWN", "data": { "guest": true }, -# "timestamp": { "seconds": 1267040730, "microseconds": 682951 } } -# -## -{ 'event': 'SHUTDOWN', 'data': { 'guest': 'bool' } } - -## -# @POWERDOWN: -# -# Emitted when the virtual machine is powered down through the power control -# system, such as via ACPI. -# -# Since: 0.12.0 -# -# Example: -# -# <- { "event": "POWERDOWN", -# "timestamp": { "seconds": 1267040730, "microseconds": 682951 } } -# -## -{ 'event': 'POWERDOWN' } - -## -# @RESET: -# -# Emitted when the virtual machine is reset -# -# @guest: If true, the reset was triggered by a guest request (such as -# a guest-initiated ACPI reboot request or other hardware-specific action) -# rather than a host request (such as the QMP command system_reset). -# (since 2.10) -# -# Since: 0.12.0 -# -# Example: -# -# <- { "event": "RESET", "data": { "guest": false }, -# "timestamp": { "seconds": 1267041653, "microseconds": 9518 } } -# -## -{ 'event': 'RESET', 'data': { 'guest': 'bool' } } - -## -# @STOP: -# -# Emitted when the virtual machine is stopped -# -# Since: 0.12.0 -# -# Example: -# -# <- { "event": "STOP", -# "timestamp": { "seconds": 1267041730, "microseconds": 281295 } } -# -## -{ 'event': 'STOP' } - -## -# @RESUME: -# -# Emitted when the virtual machine resumes execution -# -# Since: 0.12.0 -# -# Example: -# -# <- { "event": "RESUME", -# "timestamp": { "seconds": 1271770767, "microseconds": 582542 } } -# -## -{ 'event': 'RESUME' } - -## -# @SUSPEND: -# -# Emitted when guest enters a hardware suspension state, for example, S3 state, -# which is sometimes called standby state -# -# Since: 1.1 -# -# Example: -# -# <- { "event": "SUSPEND", -# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } } -# -## -{ 'event': 'SUSPEND' } - -## -# @SUSPEND_DISK: -# -# Emitted when guest enters a hardware suspension state with data saved on -# disk, for example, S4 state, which is sometimes called hibernate state -# -# Note: QEMU shuts down (similar to event @SHUTDOWN) when entering this state -# -# Since: 1.2 -# -# Example: -# -# <- { "event": "SUSPEND_DISK", -# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } } -# -## -{ 'event': 'SUSPEND_DISK' } - -## -# @WAKEUP: -# -# Emitted when the guest has woken up from suspend state and is running -# -# Since: 1.1 -# -# Example: -# -# <- { "event": "WAKEUP", -# "timestamp": { "seconds": 1344522075, "microseconds": 745528 } } -# -## -{ 'event': 'WAKEUP' } - -## # @RTC_CHANGE: # # Emitted when the guest changes the RTC time. @@ -165,30 +27,6 @@ 'data': { 'offset': 'int' } } ## -# @WATCHDOG: -# -# Emitted when the watchdog device's timer is expired -# -# @action: action that has been taken -# -# Note: If action is "reset", "shutdown", or "pause" the WATCHDOG event is -# followed respectively by the RESET, SHUTDOWN, or STOP events -# -# Note: This event is rate-limited. -# -# Since: 0.13.0 -# -# Example: -# -# <- { "event": "WATCHDOG", -# "data": { "action": "reset" }, -# "timestamp": { "seconds": 1267061043, "microseconds": 959568 } } -# -## -{ 'event': 'WATCHDOG', - 'data': { 'action': 'WatchdogExpirationAction' } } - -## # @DEVICE_DELETED: # # Emitted whenever the device removal completion is acknowledged by the guest. @@ -491,26 +329,6 @@ 'data': { 'actual': 'int' } } ## -# @GUEST_PANICKED: -# -# Emitted when guest OS panic is detected -# -# @action: action that has been taken, currently always "pause" -# -# @info: information about a panic (since 2.9) -# -# Since: 1.5 -# -# Example: -# -# <- { "event": "GUEST_PANICKED", -# "data": { "action": "pause" } } -# -## -{ 'event': 'GUEST_PANICKED', - 'data': { 'action': 'GuestPanicAction', '*info': 'GuestPanicInformation' } } - -## # @QUORUM_FAILURE: # # Emitted by the Quorum block driver if it fails to establish a quorum diff --git a/qapi/run-state.json b/qapi/run-state.json new file mode 100644 index 0000000000..d36ff49834 --- /dev/null +++ b/qapi/run-state.json @@ -0,0 +1,352 @@ +# -*- Mode: Python -*- +# + +## +# = VM run state +## + +## +# @RunState: +# +# An enumeration of VM run states. +# +# @debug: QEMU is running on a debugger +# +# @finish-migrate: guest is paused to finish the migration process +# +# @inmigrate: guest is paused waiting for an incoming migration. Note +# that this state does not tell whether the machine will start at the +# end of the migration. This depends on the command-line -S option and +# any invocation of 'stop' or 'cont' that has happened since QEMU was +# started. +# +# @internal-error: An internal error that prevents further guest execution +# has occurred +# +# @io-error: the last IOP has failed and the device is configured to pause +# on I/O errors +# +# @paused: guest has been paused via the 'stop' command +# +# @postmigrate: guest is paused following a successful 'migrate' +# +# @prelaunch: QEMU was started with -S and guest has not started +# +# @restore-vm: guest is paused to restore VM state +# +# @running: guest is actively running +# +# @save-vm: guest is paused to save the VM state +# +# @shutdown: guest is shut down (and -no-shutdown is in use) +# +# @suspended: guest is suspended (ACPI S3) +# +# @watchdog: the watchdog action is configured to pause and has been triggered +# +# @guest-panicked: guest has been panicked as a result of guest OS panic +# +# @colo: guest is paused to save/restore VM state under colo checkpoint, +# VM can not get into this state unless colo capability is enabled +# for migration. (since 2.8) +## +{ 'enum': 'RunState', + 'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused', + 'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm', + 'running', 'save-vm', 'shutdown', 'suspended', 'watchdog', + 'guest-panicked', 'colo' ] } + +## +# @StatusInfo: +# +# Information about VCPU run state +# +# @running: true if all VCPUs are runnable, false if not runnable +# +# @singlestep: true if VCPUs are in single-step mode +# +# @status: the virtual machine @RunState +# +# Since: 0.14.0 +# +# Notes: @singlestep is enabled through the GDB stub +## +{ 'struct': 'StatusInfo', + 'data': {'running': 'bool', 'singlestep': 'bool', 'status': 'RunState'} } + +## +# @query-status: +# +# Query the run status of all VCPUs +# +# Returns: @StatusInfo reflecting all VCPUs +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-status" } +# <- { "return": { "running": true, +# "singlestep": false, +# "status": "running" } } +# +## +{ 'command': 'query-status', 'returns': 'StatusInfo' } + +## +# @SHUTDOWN: +# +# Emitted when the virtual machine has shut down, indicating that qemu is +# about to exit. +# +# @guest: If true, the shutdown was triggered by a guest request (such as +# a guest-initiated ACPI shutdown request or other hardware-specific action) +# rather than a host request (such as sending qemu a SIGINT). (since 2.10) +# +# Note: If the command-line option "-no-shutdown" has been specified, qemu will +# not exit, and a STOP event will eventually follow the SHUTDOWN event +# +# Since: 0.12.0 +# +# Example: +# +# <- { "event": "SHUTDOWN", "data": { "guest": true }, +# "timestamp": { "seconds": 1267040730, "microseconds": 682951 } } +# +## +{ 'event': 'SHUTDOWN', 'data': { 'guest': 'bool' } } + +## +# @POWERDOWN: +# +# Emitted when the virtual machine is powered down through the power control +# system, such as via ACPI. +# +# Since: 0.12.0 +# +# Example: +# +# <- { "event": "POWERDOWN", +# "timestamp": { "seconds": 1267040730, "microseconds": 682951 } } +# +## +{ 'event': 'POWERDOWN' } + +## +# @RESET: +# +# Emitted when the virtual machine is reset +# +# @guest: If true, the reset was triggered by a guest request (such as +# a guest-initiated ACPI reboot request or other hardware-specific action) +# rather than a host request (such as the QMP command system_reset). +# (since 2.10) +# +# Since: 0.12.0 +# +# Example: +# +# <- { "event": "RESET", "data": { "guest": false }, +# "timestamp": { "seconds": 1267041653, "microseconds": 9518 } } +# +## +{ 'event': 'RESET', 'data': { 'guest': 'bool' } } + +## +# @STOP: +# +# Emitted when the virtual machine is stopped +# +# Since: 0.12.0 +# +# Example: +# +# <- { "event": "STOP", +# "timestamp": { "seconds": 1267041730, "microseconds": 281295 } } +# +## +{ 'event': 'STOP' } + +## +# @RESUME: +# +# Emitted when the virtual machine resumes execution +# +# Since: 0.12.0 +# +# Example: +# +# <- { "event": "RESUME", +# "timestamp": { "seconds": 1271770767, "microseconds": 582542 } } +# +## +{ 'event': 'RESUME' } + +## +# @SUSPEND: +# +# Emitted when guest enters a hardware suspension state, for example, S3 state, +# which is sometimes called standby state +# +# Since: 1.1 +# +# Example: +# +# <- { "event": "SUSPEND", +# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } } +# +## +{ 'event': 'SUSPEND' } + +## +# @SUSPEND_DISK: +# +# Emitted when guest enters a hardware suspension state with data saved on +# disk, for example, S4 state, which is sometimes called hibernate state +# +# Note: QEMU shuts down (similar to event @SHUTDOWN) when entering this state +# +# Since: 1.2 +# +# Example: +# +# <- { "event": "SUSPEND_DISK", +# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } } +# +## +{ 'event': 'SUSPEND_DISK' } + +## +# @WAKEUP: +# +# Emitted when the guest has woken up from suspend state and is running +# +# Since: 1.1 +# +# Example: +# +# <- { "event": "WAKEUP", +# "timestamp": { "seconds": 1344522075, "microseconds": 745528 } } +# +## +{ 'event': 'WAKEUP' } + +## +# @WATCHDOG: +# +# Emitted when the watchdog device's timer is expired +# +# @action: action that has been taken +# +# Note: If action is "reset", "shutdown", or "pause" the WATCHDOG event is +# followed respectively by the RESET, SHUTDOWN, or STOP events +# +# Note: This event is rate-limited. +# +# Since: 0.13.0 +# +# Example: +# +# <- { "event": "WATCHDOG", +# "data": { "action": "reset" }, +# "timestamp": { "seconds": 1267061043, "microseconds": 959568 } } +# +## +{ 'event': 'WATCHDOG', + 'data': { 'action': 'WatchdogExpirationAction' } } + +## +# @WatchdogExpirationAction: +# +# An enumeration of the actions taken when the watchdog device's timer is +# expired +# +# @reset: system resets +# +# @shutdown: system shutdown, note that it is similar to @powerdown, which +# tries to set to system status and notify guest +# +# @poweroff: system poweroff, the emulator program exits +# +# @pause: system pauses, similar to @stop +# +# @debug: system enters debug state +# +# @none: nothing is done +# +# @inject-nmi: a non-maskable interrupt is injected into the first VCPU (all +# VCPUS on x86) (since 2.4) +# +# Since: 2.1 +## +{ 'enum': 'WatchdogExpirationAction', + 'data': [ 'reset', 'shutdown', 'poweroff', 'pause', 'debug', 'none', + 'inject-nmi' ] } + +## +# @GUEST_PANICKED: +# +# Emitted when guest OS panic is detected +# +# @action: action that has been taken, currently always "pause" +# +# @info: information about a panic (since 2.9) +# +# Since: 1.5 +# +# Example: +# +# <- { "event": "GUEST_PANICKED", +# "data": { "action": "pause" } } +# +## +{ 'event': 'GUEST_PANICKED', + 'data': { 'action': 'GuestPanicAction', '*info': 'GuestPanicInformation' } } + +## +# @GuestPanicAction: +# +# An enumeration of the actions taken when guest OS panic is detected +# +# @pause: system pauses +# +# Since: 2.1 (poweroff since 2.8) +## +{ 'enum': 'GuestPanicAction', + 'data': [ 'pause', 'poweroff' ] } + +## +# @GuestPanicInformationType: +# +# An enumeration of the guest panic information types +# +# Since: 2.9 +## +{ 'enum': 'GuestPanicInformationType', + 'data': [ 'hyper-v'] } + +## +# @GuestPanicInformation: +# +# Information about a guest panic +# +# Since: 2.9 +## +{'union': 'GuestPanicInformation', + 'base': {'type': 'GuestPanicInformationType'}, + 'discriminator': 'type', + 'data': { 'hyper-v': 'GuestPanicInformationHyperV' } } + +## +# @GuestPanicInformationHyperV: +# +# Hyper-V specific guest panic information (HV crash MSRs) +# +# Since: 2.9 +## +{'struct': 'GuestPanicInformationHyperV', + 'data': { 'arg1': 'uint64', + 'arg2': 'uint64', + 'arg3': 'uint64', + 'arg4': 'uint64', + 'arg5': 'uint64' } }