From: Geert Uytterhoeven Date: Fri, 30 Apr 2021 13:10:53 +0000 (+0200) Subject: ARM: dts: blanche: Configure pull-up for SOFT_SW and SW25 GPIO keys X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=1f27fedead91eb6077c299a98ea3d9fe2f9955db;p=uclinux-h8%2Flinux.git ARM: dts: blanche: Configure pull-up for SOFT_SW and SW25 GPIO keys The GPIO pins connected to the 4 Software Switches (SW2) and the second Tact Switch (SW25) do not have external pull-up resistors, but rely on internal pull-ups being enabled. Fortunately this is satisfied by the initial state of these pins. Make this explicit by enabling bias-pull-up, to remove the dependency on initial state and/or boot loader configuration. Note that the GPIO pin connected to the first Tact Switch (SW24) does have an external pull-up resistor. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/011e4c461767f2dd690b655b3dd501eb554184c1.1619785905.git.geert+renesas@glider.be --- diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index c100ae903a46..62aa9f61321b 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -112,6 +112,9 @@ keyboard { compatible = "gpio-keys"; + pinctrl-0 = <&keyboard_pins>; + pinctrl-names = "default"; + key-1 { linux,code = ; label = "SW2-1"; @@ -235,6 +238,11 @@ function = "du1"; }; + keyboard_pins: keyboard { + pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_02"; + bias-pull-up; + }; + pmic_irq_pins: pmicirq { groups = "intc_irq2"; function = "intc";