From: Hans de Goede Date: Thu, 18 Dec 2014 17:54:50 +0000 (-0800) Subject: Input: alps - v7: document the v7 touchpad packet protocol X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=27a560ba1d4f0a07a36e1de2cae839abe776e8f3;p=sagit-ice-cold%2Fkernel_xiaomi_msm8998.git Input: alps - v7: document the v7 touchpad packet protocol Add a table documenting where all the bits are in the v7 touchpad packets. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index b48c6fb317ed..0faea6df228b 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -881,6 +881,34 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt, unsigned char *pkt, unsigned char pkt_id) { + /* + * packet-fmt b7 b6 b5 b4 b3 b2 b1 b0 + * Byte0 TWO & MULTI L 1 R M 1 Y0-2 Y0-1 Y0-0 + * Byte0 NEW L 1 X1-5 1 1 Y0-2 Y0-1 Y0-0 + * Byte1 Y0-10 Y0-9 Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3 + * Byte2 X0-11 1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5 + * Byte3 X1-11 1 X0-4 X0-3 1 X0-2 X0-1 X0-0 + * Byte4 TWO X1-10 TWO X1-9 X1-8 X1-7 X1-6 X1-5 X1-4 + * Byte4 MULTI X1-10 TWO X1-9 X1-8 X1-7 X1-6 Y1-5 1 + * Byte4 NEW X1-10 TWO X1-9 X1-8 X1-7 X1-6 0 0 + * Byte5 TWO & NEW Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4 + * Byte5 MULTI Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 F-1 F-0 + * L: Left button + * R / M: Non-clickpads: Right / Middle button + * Clickpads: When > 2 fingers are down, and some fingers + * are in the button area, then the 2 coordinates reported + * are for fingers outside the button area and these report + * extra fingers being present in the right / left button + * area. Note these fingers are not added to the F field! + * so if a TWO packet is received and R = 1 then there are + * 3 fingers down, etc. + * TWO: 1: Two touches present, byte 0/4/5 are in TWO fmt + * 0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt + * otherwise byte 0 bit 4 must be set and byte 0/4/5 are + * in NEW fmt + * F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ... + */ + mt[0].x = ((pkt[2] & 0x80) << 4); mt[0].x |= ((pkt[2] & 0x3F) << 5); mt[0].x |= ((pkt[3] & 0x30) >> 1);