From: Lothar Waßmann <LW@KARO-electronics.de>
Date: Mon, 23 Oct 2017 14:56:40 +0000 (+0200)
Subject: ARM: dts: imx53-tx53: fix interrupt flags
X-Git-Tag: v4.15-rc1~75^2~23^2
X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=27e1acb759e0409ee140f3bdaf5c70c5582ddf91;p=uclinux-h8%2Flinux.git

ARM: dts: imx53-tx53: fix interrupt flags

Some interrupts properties are given '0' as the flags argument or no
flags argument at all.
Change them to use the appropriate interrupt flags.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index b67ddf57c8d0..3a18b07bcb99 100644
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -254,7 +254,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tsc2007>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <26 0>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
 		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = <660>;
 		wakeup-source;
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 8e10c4757770..71b58b6933e1 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -227,7 +227,7 @@
 
 	phy0: ethernet-phy@0 {
 		interrupt-parent = <&gpio2>;
-		interrupts = <4>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
 		device_type = "ethernet-phy";
 	};
 };
@@ -247,7 +247,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ds1339>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <20 0>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
 		trickle-resistor-ohms = <250>;
 		trickle-diode-disable;
 	};