From: Mark Cave-Ayland Date: Fri, 24 Jun 2022 13:40:33 +0000 (+0100) Subject: pckbd: checkpatch fixes X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=32be01575df7cac57c58a34388126ee3d6740842;p=qmiga%2Fqemu.git pckbd: checkpatch fixes Signed-off-by: Mark Cave-Ayland Reviewed-by: Philippe Mathieu-Daudé Acked-by: Helge Deller Message-Id: <20220624134109.881989-19-mark.cave-ayland@ilande.co.uk> --- diff --git a/hw/input/pckbd.c b/hw/input/pckbd.c index 45c40fe3f3..c18a1a7fae 100644 --- a/hw/input/pckbd.c +++ b/hw/input/pckbd.c @@ -39,49 +39,86 @@ #include "trace.h" -/* Keyboard Controller Commands */ -#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */ -#define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */ -#define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */ -#define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */ -#define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */ -#define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */ -#define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */ -#define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */ -#define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */ -#define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */ -#define KBD_CCMD_READ_INPORT 0xC0 /* read input port */ -#define KBD_CCMD_READ_OUTPORT 0xD0 /* read output port */ -#define KBD_CCMD_WRITE_OUTPORT 0xD1 /* write output port */ -#define KBD_CCMD_WRITE_OBUF 0xD2 -#define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if - initiated by the auxiliary device */ -#define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */ -#define KBD_CCMD_DISABLE_A20 0xDD /* HP vectra only ? */ -#define KBD_CCMD_ENABLE_A20 0xDF /* HP vectra only ? */ -#define KBD_CCMD_PULSE_BITS_3_0 0xF0 /* Pulse bits 3-0 of the output port P2. */ -#define KBD_CCMD_RESET 0xFE /* Pulse bit 0 of the output port P2 = CPU reset. */ -#define KBD_CCMD_NO_OP 0xFF /* Pulse no bits of the output port P2. */ +/* Keyboard Controller Commands */ + +/* Read mode bits */ +#define KBD_CCMD_READ_MODE 0x20 +/* Write mode bits */ +#define KBD_CCMD_WRITE_MODE 0x60 +/* Get controller version */ +#define KBD_CCMD_GET_VERSION 0xA1 +/* Disable mouse interface */ +#define KBD_CCMD_MOUSE_DISABLE 0xA7 +/* Enable mouse interface */ +#define KBD_CCMD_MOUSE_ENABLE 0xA8 +/* Mouse interface test */ +#define KBD_CCMD_TEST_MOUSE 0xA9 +/* Controller self test */ +#define KBD_CCMD_SELF_TEST 0xAA +/* Keyboard interface test */ +#define KBD_CCMD_KBD_TEST 0xAB +/* Keyboard interface disable */ +#define KBD_CCMD_KBD_DISABLE 0xAD +/* Keyboard interface enable */ +#define KBD_CCMD_KBD_ENABLE 0xAE +/* read input port */ +#define KBD_CCMD_READ_INPORT 0xC0 +/* read output port */ +#define KBD_CCMD_READ_OUTPORT 0xD0 +/* write output port */ +#define KBD_CCMD_WRITE_OUTPORT 0xD1 +#define KBD_CCMD_WRITE_OBUF 0xD2 +/* Write to output buffer as if initiated by the auxiliary device */ +#define KBD_CCMD_WRITE_AUX_OBUF 0xD3 +/* Write the following byte to the mouse */ +#define KBD_CCMD_WRITE_MOUSE 0xD4 +/* HP vectra only ? */ +#define KBD_CCMD_DISABLE_A20 0xDD +/* HP vectra only ? */ +#define KBD_CCMD_ENABLE_A20 0xDF +/* Pulse bits 3-0 of the output port P2. */ +#define KBD_CCMD_PULSE_BITS_3_0 0xF0 +/* Pulse bit 0 of the output port P2 = CPU reset. */ +#define KBD_CCMD_RESET 0xFE +/* Pulse no bits of the output port P2. */ +#define KBD_CCMD_NO_OP 0xFF /* Status Register Bits */ -#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */ -#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */ -#define KBD_STAT_SELFTEST 0x04 /* Self test successful */ -#define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */ -#define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */ -#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */ -#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */ -#define KBD_STAT_PERR 0x80 /* Parity error */ + +/* Keyboard output buffer full */ +#define KBD_STAT_OBF 0x01 +/* Keyboard input buffer full */ +#define KBD_STAT_IBF 0x02 +/* Self test successful */ +#define KBD_STAT_SELFTEST 0x04 +/* Last write was a command write (0=data) */ +#define KBD_STAT_CMD 0x08 +/* Zero if keyboard locked */ +#define KBD_STAT_UNLOCKED 0x10 +/* Mouse output buffer full */ +#define KBD_STAT_MOUSE_OBF 0x20 +/* General receive/xmit timeout */ +#define KBD_STAT_GTO 0x40 +/* Parity error */ +#define KBD_STAT_PERR 0x80 /* Controller Mode Register Bits */ -#define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */ -#define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */ -#define KBD_MODE_SYS 0x04 /* The system flag (?) */ -#define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */ -#define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */ -#define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */ -#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */ -#define KBD_MODE_RFU 0x80 + +/* Keyboard data generate IRQ1 */ +#define KBD_MODE_KBD_INT 0x01 +/* Mouse data generate IRQ12 */ +#define KBD_MODE_MOUSE_INT 0x02 +/* The system flag (?) */ +#define KBD_MODE_SYS 0x04 +/* The keylock doesn't affect the keyboard if set */ +#define KBD_MODE_NO_KEYLOCK 0x08 +/* Disable keyboard interface */ +#define KBD_MODE_DISABLE_KBD 0x10 +/* Disable mouse interface */ +#define KBD_MODE_DISABLE_MOUSE 0x20 +/* Scan code conversion to PC format */ +#define KBD_MODE_KCC 0x40 +#define KBD_MODE_RFU 0x80 /* Output Port Bits */ #define KBD_OUT_RESET 0x01 /* 1=normal mode, 0=reset */ @@ -89,7 +126,8 @@ #define KBD_OUT_OBF 0x10 /* Keyboard output buffer full */ #define KBD_OUT_MOUSE_OBF 0x20 /* Mouse output buffer full */ -/* OSes typically write 0xdd/0xdf to turn the A20 line off and on. +/* + * OSes typically write 0xdd/0xdf to turn the A20 line off and on. * We make the default value of the outport include these four bits, * so that the subsection is rarely necessary. */ @@ -133,8 +171,10 @@ typedef struct KBDState { hwaddr mask; } KBDState; -/* XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be - incorrect, but it avoids having to simulate exact delays */ +/* + * XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be + * incorrect, but it avoids having to simulate exact delays + */ static void kbd_update_irq_lines(KBDState *s) { int irq_kbd_level, irq_mouse_level; @@ -302,21 +342,23 @@ static void kbd_write_command(void *opaque, hwaddr addr, trace_pckbd_kbd_write_command(val); - /* Bits 3-0 of the output port P2 of the keyboard controller may be pulsed + /* + * Bits 3-0 of the output port P2 of the keyboard controller may be pulsed * low for approximately 6 micro seconds. Bits 3-0 of the KBD_CCMD_PULSE * command specify the output port bits to be pulsed. * 0: Bit should be pulsed. 1: Bit should not be modified. * The only useful version of this command is pulsing bit 0, * which does a CPU reset. */ - if((val & KBD_CCMD_PULSE_BITS_3_0) == KBD_CCMD_PULSE_BITS_3_0) { - if(!(val & 1)) + if ((val & KBD_CCMD_PULSE_BITS_3_0) == KBD_CCMD_PULSE_BITS_3_0) { + if (!(val & 1)) { val = KBD_CCMD_RESET; - else + } else { val = KBD_CCMD_NO_OP; + } } - switch(val) { + switch (val) { case KBD_CCMD_READ_MODE: kbd_queue(s, s->mode, 0); break; @@ -409,7 +451,7 @@ static void kbd_write_data(void *opaque, hwaddr addr, trace_pckbd_kbd_write_data(val); - switch(s->write_cmd) { + switch (s->write_cmd) { case 0: ps2_write_keyboard(s->kbd, val); /* sending data to the keyboard reenables PS/2 communication */ @@ -607,7 +649,7 @@ static const VMStateDescription vmstate_kbd = { VMSTATE_UINT8(pending_tmp, KBDState), VMSTATE_END_OF_LIST() }, - .subsections = (const VMStateDescription*[]) { + .subsections = (const VMStateDescription * []) { &vmstate_kbd_outport, &vmstate_kbd_extended_state, NULL @@ -619,10 +661,11 @@ static uint64_t kbd_mm_readfn(void *opaque, hwaddr addr, unsigned size) { KBDState *s = opaque; - if (addr & s->mask) + if (addr & s->mask) { return kbd_read_status(s, 0, 1) & 0xff; - else + } else { return kbd_read_data(s, 0, 1) & 0xff; + } } static void kbd_mm_writefn(void *opaque, hwaddr addr, @@ -630,10 +673,11 @@ static void kbd_mm_writefn(void *opaque, hwaddr addr, { KBDState *s = opaque; - if (addr & s->mask) + if (addr & s->mask) { kbd_write_command(s, 0, value & 0xff, 1); - else + } else { kbd_write_data(s, 0, value & 0xff, 1); + } }