From: Maxime Ripard Date: Sat, 4 Jul 2020 13:38:03 +0000 (+0200) Subject: drm/sun4i: lvds: Invert the LVDS polarity X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=3bc46a083fa9f475dd2e0ab8717d9839b070b8d9;p=uclinux-h8%2Flinux.git drm/sun4i: lvds: Invert the LVDS polarity The LVDS controller can invert the polarity / lanes of the LVDS output. The default polarity causes some issues on some panels. However, U-Boot has always used the opposite polarity without any reported issue, and the only currently supported LVDS panel in-tree (the TBS A711) seems to be able to work with both settings. Let's just use the same polarity than U-Boot to be more consistent and hopefully support all the panels. Signed-off-by: Maxime Ripard Reviewed-by: Chen-Yu Tsai Cc: Ondrej Jirman Link: https://patchwork.freedesktop.org/patch/msgid/20200704133803.37330-1-maxime@cerno.tech --- diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index ae177b2bcf4b..09ad8506a81b 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -474,9 +474,7 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon, SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) | SUN4I_TCON0_BASIC2_V_BACKPORCH(bp)); - reg = SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 | - SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL | - SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL; + reg = SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0; if (sun4i_tcon_get_pixel_depth(encoder) == 24) reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS; else