From: Florian Fainelli Date: Wed, 8 Dec 2021 00:37:17 +0000 (-0800) Subject: dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=4102cf163c255e4f97027b6f19a46e91693834fd;p=uclinux-h8%2Flinux.git dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML Convert the Broadcom STB BCM7038 Level 1 interrupt controller Device Tree binding to YAML to help with validation. Signed-off-by: Florian Fainelli Link: https://lore.kernel.org/r/20211208003727.3596577-7-f.fainelli@gmail.com Signed-off-by: Rob Herring --- diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt deleted file mode 100644 index 5ddef1dc0c1a..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt +++ /dev/null @@ -1,61 +0,0 @@ -Broadcom BCM7038-style Level 1 interrupt controller - -This block is a first level interrupt controller that is typically connected -directly to one of the HW INT lines on each CPU. Every BCM7xxx set-top chip -since BCM7038 has contained this hardware. - -Key elements of the hardware design include: - -- 64, 96, 128, or 160 incoming level IRQ lines - -- Most onchip peripherals are wired directly to an L1 input - -- A separate instance of the register set for each CPU, allowing individual - peripheral IRQs to be routed to any CPU - -- Atomic mask/unmask operations - -- No polarity/level/edge settings - -- No FIFO or priority encoder logic; software is expected to read all - 2-5 status words to determine which IRQs are pending - -Required properties: - -- compatible: should be "brcm,bcm7038-l1-intc" -- reg: specifies the base physical address and size of the registers; - the number of supported IRQs is inferred from the size argument -- interrupt-controller: identifies the node as an interrupt controller -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- interrupts: specifies the interrupt line(s) in the interrupt-parent controller - node; valid values depend on the type of parent interrupt controller - -Optional properties: - -- brcm,irq-can-wake: If present, this means the L1 controller can be used as a - wakeup source for system suspend/resume. - -Optional properties: - -- brcm,int-fwd-mask: if present, a bit mask to indicate which interrupts - have already been configured by the firmware and should be left unmanaged. - This should have one 32-bit word per status/set/clear/mask group. - -If multiple reg ranges and interrupt-parent entries are present on an SMP -system, the driver will allow IRQ SMP affinity to be set up through the -/proc/irq/ interface. In the simplest possible configuration, only one -reg range and one interrupt-parent is needed. - -Example: - -periph_intc: periph_intc@1041a400 { - compatible = "brcm,bcm7038-l1-intc"; - reg = <0x1041a400 0x30 0x1041a600 0x30>; - - interrupt-controller; - #interrupt-cells = <1>; - - interrupt-parent = <&cpu_intc>; - interrupts = <2>, <3>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml new file mode 100644 index 000000000000..5ecb6faa70dc --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7038-l1-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM7038-style Level 1 interrupt controller + +description: > + This block is a first level interrupt controller that is typically connected + directly to one of the HW INT lines on each CPU. Every BCM7xxx set-top chip + since BCM7038 has contained this hardware. + + Key elements of the hardware design include: + + - 64, 96, 128, or 160 incoming level IRQ lines + + - Most onchip peripherals are wired directly to an L1 input + + - A separate instance of the register set for each CPU, allowing individual + peripheral IRQs to be routed to any CPU + + - Atomic mask/unmask operations + + - No polarity/level/edge settings + + - No FIFO or priority encoder logic; software is expected to read all + 2-5 status words to determine which IRQs are pending + + If multiple reg ranges and interrupt-parent entries are present on an SMP + system, the driver will allow IRQ SMP affinity to be set up through the + /proc/irq/ interface. In the simplest possible configuration, only one + reg range and one interrupt-parent is needed. + +maintainers: + - Florian Fainelli + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + const: brcm,bcm7038-l1-intc + + reg: + description: > + Specifies the base physical address and size of the registers + the number of supported IRQs is inferred from the size argument + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + interrupts: + description: > + Specifies the interrupt line(s) in the interrupt-parent controller node; + valid values depend on the type of parent interrupt controller + + brcm,irq-can-wake: + type: boolean + description: > + If present, this means the L1 controller can be used as a + wakeup source for system suspend/resume. + + brcm,int-fwd-mask: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + If present, a bit mask to indicate which interrupts have already been + configured by the firmware and should be left unmanaged. This should + have one 32-bit word per status/set/clear/mask group. + +required: + - compatible + - reg + - interrupt-controller + - "#interrupt-cells" + - interrupts + +additionalProperties: false + +examples: + - | + periph_intc: interrupt-controller@1041a400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x1041a400 0x30>, <0x1041a600 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; + };