From: brobecke Date: Mon, 11 Oct 2004 01:00:57 +0000 (+0000) Subject: * mips-tdep.c (mips16_decode_reg_save): Delete, no longer used. X-Git-Tag: reparent-point~494 X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=4c7e9009bb78d09283b7a2daa78ae96e8d29e101;p=pf3gnuchains%2Fpf3gnuchains4x.git * mips-tdep.c (mips16_decode_reg_save): Delete, no longer used. (mips_insn16_frame_cache): Pass frame cache in call to heuristic_proc_desc. Move some code to mips16_heuristic_proc_desc. Remove code that became redundant as a consequence. (mips32_heuristic_proc_desc): No longer compute a fake procedure descriptor. Compute the full frame cache instead. Some minor comment reformatting. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index dc0139a0f0..e8ac361280 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,13 @@ +2004-10-10 Joel Brobecker + + * mips-tdep.c (mips16_decode_reg_save): Delete, no longer used. + (mips_insn16_frame_cache): Pass frame cache in call to + heuristic_proc_desc. Move some code to mips16_heuristic_proc_desc. + Remove code that became redundant as a consequence. + (mips32_heuristic_proc_desc): No longer compute a fake + procedure descriptor. Compute the full frame cache instead. + Some minor comment reformatting. + 2004-10-10 Jim Blandy * MAINTAINERS (generic symtabs, dwarf readers, elf reader, stabs diff --git a/gdb/mips-tdep.c b/gdb/mips-tdep.c index fffc70da19..682ed62f9d 100644 --- a/gdb/mips-tdep.c +++ b/gdb/mips-tdep.c @@ -945,30 +945,6 @@ after_prologue (CORE_ADDR pc) return 0; } -/* Decode a MIPS16 instruction that saves a register in the stack, and - set the appropriate bit in the general register or float register mask - to indicate which register is saved. This is a helper function - for mips_find_saved_regs. */ - -static void -mips16_decode_reg_save (t_inst inst, unsigned long *gen_mask) -{ - if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */ - { - int reg = mips16_to_32_reg[(inst & 0x700) >> 8]; - *gen_mask |= (1 << reg); - } - else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */ - { - int reg = mips16_to_32_reg[(inst & 0xe0) >> 5]; - *gen_mask |= (1 << reg); - } - else if ((inst & 0xff00) == 0x6200 /* sw $ra,n($sp) */ - || (inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */ - *gen_mask |= (1 << RA_REGNUM); -} - - /* Fetch and return instruction from the specified location. If the PC is odd, assume it's a MIPS16 instruction; otherwise MIPS32. */ @@ -1765,154 +1741,9 @@ mips_insn16_frame_cache (struct frame_info *next_frame, void **this_cache) if (start_addr == 0) start_addr = heuristic_proc_start (pc); -#ifdef NOT_YET proc_desc = heuristic_proc_desc (start_addr, pc, next_frame, *this_cache); -#else - proc_desc = heuristic_proc_desc (start_addr, pc, next_frame, NULL); -#endif } - /* Extract the frame's base. */ - cache->base = (frame_unwind_register_signed (next_frame, NUM_REGS + PROC_FRAME_REG (proc_desc)) - + PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc)); - - kernel_trap = PROC_REG_MASK (proc_desc) & 1; - gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc); - float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc); - - /* In any frame other than the innermost or a frame interrupted by a - signal, we assume that all registers have been saved. This - assumes that all register saves in a function happen before the - first function call. */ - if (in_prologue (frame_pc_unwind (next_frame), PROC_LOW_ADDR (proc_desc)) - /* Not sure exactly what kernel_trap means, but if it means the - kernel saves the registers without a prologue doing it, we - better not examine the prologue to see whether registers - have been saved yet. */ - && !kernel_trap) - { - /* We need to figure out whether the registers that the - proc_desc claims are saved have been saved yet. */ - - CORE_ADDR addr; - - /* Bitmasks; set if we have found a save for the register. */ - unsigned long gen_save_found = 0; - unsigned long float_save_found = 0; - int mips16; - - /* If the address is odd, assume this is MIPS16 code. */ - addr = PROC_LOW_ADDR (proc_desc); - - /* Scan through this function's instructions preceding the - current PC, and look for those that save registers. */ - while (addr < frame_pc_unwind (next_frame)) - { - mips16_decode_reg_save (mips16_fetch_instruction (addr), - &gen_save_found); - addr += MIPS16_INSTLEN; - } - gen_mask = gen_save_found; - float_mask = float_save_found; - } - - /* Fill in the offsets for the registers which gen_mask says were - saved. */ - { - CORE_ADDR reg_position = (cache->base - + PROC_REG_OFFSET (proc_desc)); - int ireg; - for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1) - if (gen_mask & 0x80000000) - { - cache->saved_regs[NUM_REGS + ireg].addr = reg_position; - reg_position -= mips_abi_regsize (gdbarch); - } - } - - /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse - order of that normally used by gcc. Therefore, we have to fetch - the first instruction of the function, and if it's an entry - instruction that saves $s0 or $s1, correct their saved addresses. */ - { - ULONGEST inst = mips16_fetch_instruction (PROC_LOW_ADDR (proc_desc)); - if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) - /* entry */ - { - int reg; - int sreg_count = (inst >> 6) & 3; - - /* Check if the ra register was pushed on the stack. */ - CORE_ADDR reg_position = (cache->base - + PROC_REG_OFFSET (proc_desc)); - if (inst & 0x20) - reg_position -= mips_abi_regsize (gdbarch); - - /* Check if the s0 and s1 registers were pushed on the - stack. */ - /* NOTE: cagney/2004-02-08: Huh? This is doing no such - check. */ - for (reg = 16; reg < sreg_count + 16; reg++) - { - cache->saved_regs[NUM_REGS + reg].addr = reg_position; - reg_position -= mips_abi_regsize (gdbarch); - } - } - } - - /* Fill in the offsets for the registers which float_mask says were - saved. */ - { - CORE_ADDR reg_position = (cache->base - + PROC_FREG_OFFSET (proc_desc)); - int ireg; - /* Fill in the offsets for the float registers which float_mask - says were saved. */ - for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1) - if (float_mask & 0x80000000) - { - if (mips_abi_regsize (gdbarch) == 4 - && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) - { - /* On a big endian 32 bit ABI, floating point registers - are paired to form doubles such that the most - significant part is in $f[N+1] and the least - significant in $f[N] vis: $f[N+1] ||| $f[N]. The - registers are also spilled as a pair and stored as a - double. - - When little-endian the least significant part is - stored first leading to the memory order $f[N] and - then $f[N+1]. - - Unfortunately, when big-endian the most significant - part of the double is stored first, and the least - significant is stored second. This leads to the - registers being ordered in memory as firt $f[N+1] and - then $f[N]. - - For the big-endian case make certain that the - addresses point at the correct (swapped) locations - $f[N] and $f[N+1] pair (keep in mind that - reg_position is decremented each time through the - loop). */ - if ((ireg & 1)) - cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg] - .addr = reg_position - mips_abi_regsize (gdbarch); - else - cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg] - .addr = reg_position + mips_abi_regsize (gdbarch); - } - else - cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg] - .addr = reg_position; - reg_position -= mips_abi_regsize (gdbarch); - } - - cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc] - = cache->saved_regs[NUM_REGS + RA_REGNUM]; - } - /* SP_REGNUM, contains the value and not the address. */ trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base); @@ -2445,14 +2276,13 @@ mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, { CORE_ADDR cur_pc; CORE_ADDR frame_addr = 0; /* Value of $r17, used as frame pointer */ + long frame_offset = 0; /* Size of stack frame. */ + long frame_adjust = 0; /* Offset of FP from SP. */ + int frame_reg = MIPS_SP_REGNUM; unsigned short prev_inst = 0; /* saved copy of previous instruction */ unsigned inst = 0; /* current instruction */ unsigned entry_inst = 0; /* the entry instruction */ int reg, offset; - struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); - - PROC_FRAME_OFFSET (&temp_proc_desc) = 0; /* size of stack frame */ - PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */ for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS16_INSTLEN) { @@ -2467,7 +2297,7 @@ mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, { offset = mips16_get_imm (prev_inst, inst, 8, 8, 1); if (offset < 0) /* negative stack adjustment? */ - PROC_FRAME_OFFSET (&temp_proc_desc) -= offset; + frame_offset -= offset; else /* Exit loop if a positive stack adjustment is found, which usually means that the stack cleanup code in the function @@ -2478,55 +2308,50 @@ mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, { offset = mips16_get_imm (prev_inst, inst, 8, 4, 0); reg = mips16_to_32_reg[(inst & 0x700) >> 8]; - PROC_REG_MASK (&temp_proc_desc) |= (1 << reg); set_reg_offset (this_cache, reg, sp + offset); } else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */ { offset = mips16_get_imm (prev_inst, inst, 5, 8, 0); reg = mips16_to_32_reg[(inst & 0xe0) >> 5]; - PROC_REG_MASK (&temp_proc_desc) |= (1 << reg); set_reg_offset (this_cache, reg, sp + offset); } else if ((inst & 0xff00) == 0x6200) /* sw $ra,n($sp) */ { offset = mips16_get_imm (prev_inst, inst, 8, 4, 0); - PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM); set_reg_offset (this_cache, RA_REGNUM, sp + offset); } else if ((inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */ { offset = mips16_get_imm (prev_inst, inst, 8, 8, 0); - PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM); set_reg_offset (this_cache, RA_REGNUM, sp + offset); } else if (inst == 0x673d) /* move $s1, $sp */ { frame_addr = sp; - PROC_FRAME_REG (&temp_proc_desc) = 17; + frame_reg = 17; } else if ((inst & 0xff00) == 0x0100) /* addiu $s1,sp,n */ { offset = mips16_get_imm (prev_inst, inst, 8, 4, 0); frame_addr = sp + offset; - PROC_FRAME_REG (&temp_proc_desc) = 17; - PROC_FRAME_ADJUST (&temp_proc_desc) = offset; + frame_reg = 17; + frame_adjust = offset; } else if ((inst & 0xFF00) == 0xd900) /* sw reg,offset($s1) */ { offset = mips16_get_imm (prev_inst, inst, 5, 4, 0); reg = mips16_to_32_reg[(inst & 0xe0) >> 5]; - PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; set_reg_offset (this_cache, reg, frame_addr + offset); } else if ((inst & 0xFF00) == 0x7900) /* sd reg,offset($s1) */ { offset = mips16_get_imm (prev_inst, inst, 5, 8, 0); reg = mips16_to_32_reg[(inst & 0xe0) >> 5]; - PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; set_reg_offset (this_cache, reg, frame_addr + offset); } - else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */ + else if ((inst & 0xf81f) == 0xe809 + && (inst & 0x700) != 0x700) /* entry */ entry_inst = inst; /* save for later processing */ else if ((inst & 0xf800) == 0x1800) /* jal(x) */ cur_pc += MIPS16_INSTLEN; /* 32-bit instruction */ @@ -2544,16 +2369,15 @@ mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, int sreg_count = (entry_inst >> 6) & 3; /* The entry instruction always subtracts 32 from the SP. */ - PROC_FRAME_OFFSET (&temp_proc_desc) += 32; + frame_offset += 32; /* Now we can calculate what the SP must have been at the start of the function prologue. */ - sp += PROC_FRAME_OFFSET (&temp_proc_desc); + sp += frame_offset; /* Check if a0-a3 were saved in the caller's argument save area. */ for (reg = 4, offset = 0; reg < areg_count + 4; reg++) { - PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; set_reg_offset (this_cache, reg, sp + offset); offset += mips_abi_regsize (current_gdbarch); } @@ -2562,7 +2386,6 @@ mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, offset = -4; if (entry_inst & 0x20) { - PROC_REG_MASK (&temp_proc_desc) |= 1 << RA_REGNUM; set_reg_offset (this_cache, RA_REGNUM, sp + offset); offset -= mips_abi_regsize (current_gdbarch); } @@ -2570,11 +2393,52 @@ mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, /* Check if the s0 and s1 registers were pushed on the stack. */ for (reg = 16; reg < sreg_count + 16; reg++) { - PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; set_reg_offset (this_cache, reg, sp + offset); offset -= mips_abi_regsize (current_gdbarch); } } + + if (this_cache != NULL) + { + this_cache->base = + (frame_unwind_register_signed (next_frame, NUM_REGS + frame_reg) + + frame_offset - frame_adjust); + /* FIXME: brobecker/2004-10-10: Just as in the mips32 case, we should + be able to get rid of the assignment below, evetually. But it's + still needed for now. */ + this_cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc] + = this_cache->saved_regs[NUM_REGS + RA_REGNUM]; + } + + /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse + order of that normally used by gcc. Therefore, we have to fetch + the first instruction of the function, and if it's an entry + instruction that saves $s0 or $s1, correct their saved addresses. */ + /* FIXME: brobecker/2004-10-10: This code was moved here from + mips_insn16_frame_cache(), but can be merged with the block above + handling entry_inst. Will be done in a separate pass, to make changes + more atomic. Actually, this code seems completely redundant! */ + { + ULONGEST inst = mips16_fetch_instruction (start_pc); + if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */ + { + int reg; + int sreg_count = (inst >> 6) & 3; + CORE_ADDR reg_position = (this_cache->base); + + /* Check if the ra register was pushed on the stack. */ + if (inst & 0x20) + reg_position -= mips_abi_regsize (current_gdbarch); + + /* Check if the s0 and s1 registers were pushed on the stack. */ + /* NOTE: cagney/2004-02-08: Huh? This is doing no such check. */ + for (reg = 16; reg < sreg_count + 16; reg++) + { + this_cache->saved_regs[NUM_REGS + reg].addr = reg_position; + reg_position -= mips_abi_regsize (current_gdbarch); + } + } + } } /* Mark all the registers as unset in the saved_regs array