From: Igal Chernobelsky Date: Mon, 9 Sep 2013 09:24:32 +0000 (+0300) Subject: wl18xx: default config alignment with phy defaults X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=50e4c905a0c782b8a5717ed0d907c53d82c16ce2;p=sagit-ice-cold%2Fkernel_xiaomi_msm8998.git wl18xx: default config alignment with phy defaults Driver default config is aligned with phy default parameters. Now that RDL1_3 has 2 antennas defined by default we need to explicitly define ht.mode to HT_MODE_WIDE to have SISO40 as default. Signed-off-by: Yair Shapira Signed-off-by: Igal Chernobelsky Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho --- diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index d0daca1d23bc..b48d01db3ef4 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -505,7 +505,7 @@ static struct wlcore_conf wl18xx_conf = { static struct wl18xx_priv_conf wl18xx_default_priv_conf = { .ht = { - .mode = HT_MODE_DEFAULT, + .mode = HT_MODE_WIDE, }, .phy = { .phy_standalone = 0x00, @@ -516,7 +516,7 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = { .auto_detect = 0x00, .dedicated_fem = FEM_NONE, .low_band_component = COMPONENT_3_WAY_SWITCH, - .low_band_component_type = 0x04, + .low_band_component_type = 0x05, .high_band_component = COMPONENT_2_WAY_SWITCH, .high_band_component_type = 0x09, .tcxo_ldo_voltage = 0x00, @@ -556,15 +556,15 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = { .per_chan_pwr_limit_arr_11p = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, .psat = 0, - .low_power_val = 0x08, - .med_power_val = 0x12, - .high_power_val = 0x18, - .low_power_val_2nd = 0x05, - .med_power_val_2nd = 0x0a, - .high_power_val_2nd = 0x14, .external_pa_dc2dc = 0, .number_of_assembled_ant2_4 = 2, .number_of_assembled_ant5 = 1, + .low_power_val = 0xff, + .med_power_val = 0xff, + .high_power_val = 0xff, + .low_power_val_2nd = 0xff, + .med_power_val_2nd = 0xff, + .high_power_val_2nd = 0xff, .tx_rf_margin = 1, }, };