From: Jakob Bornecrantz Date: Thu, 10 Dec 2009 00:19:10 +0000 (+0000) Subject: drm/vmwgfx: Add svga headers for vmwgfx driver X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=632f61178d0473861ba77e774bb654b37bc7eccc;p=sagit-ice-cold%2Fkernel_xiaomi_msm8998.git drm/vmwgfx: Add svga headers for vmwgfx driver These headers are shared between multiple place where different coding standards apply. They will be fixed up at a later time. Signed-off-by: Thomas Hellström Signed-off-by: Jakob Bornecrantz Signed-off-by: Dave Airlie --- diff --git a/drivers/gpu/drm/vmwgfx/svga3d_reg.h b/drivers/gpu/drm/vmwgfx/svga3d_reg.h new file mode 100644 index 000000000000..77cb45331000 --- /dev/null +++ b/drivers/gpu/drm/vmwgfx/svga3d_reg.h @@ -0,0 +1,1793 @@ +/********************************************************** + * Copyright 1998-2009 VMware, Inc. All rights reserved. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + **********************************************************/ + +/* + * svga3d_reg.h -- + * + * SVGA 3D hardware definitions + */ + +#ifndef _SVGA3D_REG_H_ +#define _SVGA3D_REG_H_ + +#include "svga_reg.h" + + +/* + * 3D Hardware Version + * + * The hardware version is stored in the SVGA_FIFO_3D_HWVERSION fifo + * register. Is set by the host and read by the guest. This lets + * us make new guest drivers which are backwards-compatible with old + * SVGA hardware revisions. It does not let us support old guest + * drivers. Good enough for now. + * + */ + +#define SVGA3D_MAKE_HWVERSION(major, minor) (((major) << 16) | ((minor) & 0xFF)) +#define SVGA3D_MAJOR_HWVERSION(version) ((version) >> 16) +#define SVGA3D_MINOR_HWVERSION(version) ((version) & 0xFF) + +typedef enum { + SVGA3D_HWVERSION_WS5_RC1 = SVGA3D_MAKE_HWVERSION(0, 1), + SVGA3D_HWVERSION_WS5_RC2 = SVGA3D_MAKE_HWVERSION(0, 2), + SVGA3D_HWVERSION_WS51_RC1 = SVGA3D_MAKE_HWVERSION(0, 3), + SVGA3D_HWVERSION_WS6_B1 = SVGA3D_MAKE_HWVERSION(1, 1), + SVGA3D_HWVERSION_FUSION_11 = SVGA3D_MAKE_HWVERSION(1, 4), + SVGA3D_HWVERSION_WS65_B1 = SVGA3D_MAKE_HWVERSION(2, 0), + SVGA3D_HWVERSION_CURRENT = SVGA3D_HWVERSION_WS65_B1, +} SVGA3dHardwareVersion; + +/* + * Generic Types + */ + +typedef uint32 SVGA3dBool; /* 32-bit Bool definition */ +#define SVGA3D_NUM_CLIPPLANES 6 +#define SVGA3D_MAX_SIMULTANEOUS_RENDER_TARGETS 8 + + +/* + * Surface formats. + * + * If you modify this list, be sure to keep GLUtil.c in sync. It + * includes the internal format definition of each surface in + * GLUtil_ConvertSurfaceFormat, and it contains a table of + * human-readable names in GLUtil_GetFormatName. + */ + +typedef enum SVGA3dSurfaceFormat { + SVGA3D_FORMAT_INVALID = 0, + + SVGA3D_X8R8G8B8 = 1, + SVGA3D_A8R8G8B8 = 2, + + SVGA3D_R5G6B5 = 3, + SVGA3D_X1R5G5B5 = 4, + SVGA3D_A1R5G5B5 = 5, + SVGA3D_A4R4G4B4 = 6, + + SVGA3D_Z_D32 = 7, + SVGA3D_Z_D16 = 8, + SVGA3D_Z_D24S8 = 9, + SVGA3D_Z_D15S1 = 10, + + SVGA3D_LUMINANCE8 = 11, + SVGA3D_LUMINANCE4_ALPHA4 = 12, + SVGA3D_LUMINANCE16 = 13, + SVGA3D_LUMINANCE8_ALPHA8 = 14, + + SVGA3D_DXT1 = 15, + SVGA3D_DXT2 = 16, + SVGA3D_DXT3 = 17, + SVGA3D_DXT4 = 18, + SVGA3D_DXT5 = 19, + + SVGA3D_BUMPU8V8 = 20, + SVGA3D_BUMPL6V5U5 = 21, + SVGA3D_BUMPX8L8V8U8 = 22, + SVGA3D_BUMPL8V8U8 = 23, + + SVGA3D_ARGB_S10E5 = 24, /* 16-bit floating-point ARGB */ + SVGA3D_ARGB_S23E8 = 25, /* 32-bit floating-point ARGB */ + + SVGA3D_A2R10G10B10 = 26, + + /* signed formats */ + SVGA3D_V8U8 = 27, + SVGA3D_Q8W8V8U8 = 28, + SVGA3D_CxV8U8 = 29, + + /* mixed formats */ + SVGA3D_X8L8V8U8 = 30, + SVGA3D_A2W10V10U10 = 31, + + SVGA3D_ALPHA8 = 32, + + /* Single- and dual-component floating point formats */ + SVGA3D_R_S10E5 = 33, + SVGA3D_R_S23E8 = 34, + SVGA3D_RG_S10E5 = 35, + SVGA3D_RG_S23E8 = 36, + + /* + * Any surface can be used as a buffer object, but SVGA3D_BUFFER is + * the most efficient format to use when creating new surfaces + * expressly for index or vertex data. + */ + SVGA3D_BUFFER = 37, + + SVGA3D_Z_D24X8 = 38, + + SVGA3D_V16U16 = 39, + + SVGA3D_G16R16 = 40, + SVGA3D_A16B16G16R16 = 41, + + /* Packed Video formats */ + SVGA3D_UYVY = 42, + SVGA3D_YUY2 = 43, + + SVGA3D_FORMAT_MAX +} SVGA3dSurfaceFormat; + +typedef uint32 SVGA3dColor; /* a, r, g, b */ + +/* + * These match the D3DFORMAT_OP definitions used by Direct3D. We need + * them so that we can query the host for what the supported surface + * operations are (when we're using the D3D backend, in particular), + * and so we can send those operations to the guest. + */ +typedef enum { + SVGA3DFORMAT_OP_TEXTURE = 0x00000001, + SVGA3DFORMAT_OP_VOLUMETEXTURE = 0x00000002, + SVGA3DFORMAT_OP_CUBETEXTURE = 0x00000004, + SVGA3DFORMAT_OP_OFFSCREEN_RENDERTARGET = 0x00000008, + SVGA3DFORMAT_OP_SAME_FORMAT_RENDERTARGET = 0x00000010, + SVGA3DFORMAT_OP_ZSTENCIL = 0x00000040, + SVGA3DFORMAT_OP_ZSTENCIL_WITH_ARBITRARY_COLOR_DEPTH = 0x00000080, + +/* + * This format can be used as a render target if the current display mode + * is the same depth if the alpha channel is ignored. e.g. if the device + * can render to A8R8G8B8 when the display mode is X8R8G8B8, then the + * format op list entry for A8R8G8B8 should have this cap. + */ + SVGA3DFORMAT_OP_SAME_FORMAT_UP_TO_ALPHA_RENDERTARGET = 0x00000100, + +/* + * This format contains DirectDraw support (including Flip). This flag + * should not to be set on alpha formats. + */ + SVGA3DFORMAT_OP_DISPLAYMODE = 0x00000400, + +/* + * The rasterizer can support some level of Direct3D support in this format + * and implies that the driver can create a Context in this mode (for some + * render target format). When this flag is set, the SVGA3DFORMAT_OP_DISPLAYMODE + * flag must also be set. + */ + SVGA3DFORMAT_OP_3DACCELERATION = 0x00000800, + +/* + * This is set for a private format when the driver has put the bpp in + * the structure. + */ + SVGA3DFORMAT_OP_PIXELSIZE = 0x00001000, + +/* + * Indicates that this format can be converted to any RGB format for which + * SVGA3DFORMAT_OP_MEMBEROFGROUP_ARGB is specified + */ + SVGA3DFORMAT_OP_CONVERT_TO_ARGB = 0x00002000, + +/* + * Indicates that this format can be used to create offscreen plain surfaces. + */ + SVGA3DFORMAT_OP_OFFSCREENPLAIN = 0x00004000, + +/* + * Indicated that this format can be read as an SRGB texture (meaning that the + * sampler will linearize the looked up data) + */ + SVGA3DFORMAT_OP_SRGBREAD = 0x00008000, + +/* + * Indicates that this format can be used in the bumpmap instructions + */ + SVGA3DFORMAT_OP_BUMPMAP = 0x00010000, + +/* + * Indicates that this format can be sampled by the displacement map sampler + */ + SVGA3DFORMAT_OP_DMAP = 0x00020000, + +/* + * Indicates that this format cannot be used with texture filtering + */ + SVGA3DFORMAT_OP_NOFILTER = 0x00040000, + +/* + * Indicates that format conversions are supported to this RGB format if + * SVGA3DFORMAT_OP_CONVERT_TO_ARGB is specified in the source format. + */ + SVGA3DFORMAT_OP_MEMBEROFGROUP_ARGB = 0x00080000, + +/* + * Indicated that this format can be written as an SRGB target (meaning that the + * pixel pipe will DE-linearize data on output to format) + */ + SVGA3DFORMAT_OP_SRGBWRITE = 0x00100000, + +/* + * Indicates that this format cannot be used with alpha blending + */ + SVGA3DFORMAT_OP_NOALPHABLEND = 0x00200000, + +/* + * Indicates that the device can auto-generated sublevels for resources + * of this format + */ + SVGA3DFORMAT_OP_AUTOGENMIPMAP = 0x00400000, + +/* + * Indicates that this format can be used by vertex texture sampler + */ + SVGA3DFORMAT_OP_VERTEXTEXTURE = 0x00800000, + +/* + * Indicates that this format supports neither texture coordinate wrap + * modes, nor mipmapping + */ + SVGA3DFORMAT_OP_NOTEXCOORDWRAPNORMIP = 0x01000000 +} SVGA3dFormatOp; + +/* + * This structure is a conversion of SVGA3DFORMAT_OP_*. + * Entries must be located at the same position. + */ +typedef union { + uint32 value; + struct { + uint32 texture : 1; + uint32 volumeTexture : 1; + uint32 cubeTexture : 1; + uint32 offscreenRenderTarget : 1; + uint32 sameFormatRenderTarget : 1; + uint32 unknown1 : 1; + uint32 zStencil : 1; + uint32 zStencilArbitraryDepth : 1; + uint32 sameFormatUpToAlpha : 1; + uint32 unknown2 : 1; + uint32 displayMode : 1; + uint32 acceleration3d : 1; + uint32 pixelSize : 1; + uint32 convertToARGB : 1; + uint32 offscreenPlain : 1; + uint32 sRGBRead : 1; + uint32 bumpMap : 1; + uint32 dmap : 1; + uint32 noFilter : 1; + uint32 memberOfGroupARGB : 1; + uint32 sRGBWrite : 1; + uint32 noAlphaBlend : 1; + uint32 autoGenMipMap : 1; + uint32 vertexTexture : 1; + uint32 noTexCoordWrapNorMip : 1; + }; +} SVGA3dSurfaceFormatCaps; + +/* + * SVGA_3D_CMD_SETRENDERSTATE Types. All value types + * must fit in a uint32. + */ + +typedef enum { + SVGA3D_RS_INVALID = 0, + SVGA3D_RS_ZENABLE = 1, /* SVGA3dBool */ + SVGA3D_RS_ZWRITEENABLE = 2, /* SVGA3dBool */ + SVGA3D_RS_ALPHATESTENABLE = 3, /* SVGA3dBool */ + SVGA3D_RS_DITHERENABLE = 4, /* SVGA3dBool */ + SVGA3D_RS_BLENDENABLE = 5, /* SVGA3dBool */ + SVGA3D_RS_FOGENABLE = 6, /* SVGA3dBool */ + SVGA3D_RS_SPECULARENABLE = 7, /* SVGA3dBool */ + SVGA3D_RS_STENCILENABLE = 8, /* SVGA3dBool */ + SVGA3D_RS_LIGHTINGENABLE = 9, /* SVGA3dBool */ + SVGA3D_RS_NORMALIZENORMALS = 10, /* SVGA3dBool */ + SVGA3D_RS_POINTSPRITEENABLE = 11, /* SVGA3dBool */ + SVGA3D_RS_POINTSCALEENABLE = 12, /* SVGA3dBool */ + SVGA3D_RS_STENCILREF = 13, /* uint32 */ + SVGA3D_RS_STENCILMASK = 14, /* uint32 */ + SVGA3D_RS_STENCILWRITEMASK = 15, /* uint32 */ + SVGA3D_RS_FOGSTART = 16, /* float */ + SVGA3D_RS_FOGEND = 17, /* float */ + SVGA3D_RS_FOGDENSITY = 18, /* float */ + SVGA3D_RS_POINTSIZE = 19, /* float */ + SVGA3D_RS_POINTSIZEMIN = 20, /* float */ + SVGA3D_RS_POINTSIZEMAX = 21, /* float */ + SVGA3D_RS_POINTSCALE_A = 22, /* float */ + SVGA3D_RS_POINTSCALE_B = 23, /* float */ + SVGA3D_RS_POINTSCALE_C = 24, /* float */ + SVGA3D_RS_FOGCOLOR = 25, /* SVGA3dColor */ + SVGA3D_RS_AMBIENT = 26, /* SVGA3dColor */ + SVGA3D_RS_CLIPPLANEENABLE = 27, /* SVGA3dClipPlanes */ + SVGA3D_RS_FOGMODE = 28, /* SVGA3dFogMode */ + SVGA3D_RS_FILLMODE = 29, /* SVGA3dFillMode */ + SVGA3D_RS_SHADEMODE = 30, /* SVGA3dShadeMode */ + SVGA3D_RS_LINEPATTERN = 31, /* SVGA3dLinePattern */ + SVGA3D_RS_SRCBLEND = 32, /* SVGA3dBlendOp */ + SVGA3D_RS_DSTBLEND = 33, /* SVGA3dBlendOp */ + SVGA3D_RS_BLENDEQUATION = 34, /* SVGA3dBlendEquation */ + SVGA3D_RS_CULLMODE = 35, /* SVGA3dFace */ + SVGA3D_RS_ZFUNC = 36, /* SVGA3dCmpFunc */ + SVGA3D_RS_ALPHAFUNC = 37, /* SVGA3dCmpFunc */ + SVGA3D_RS_STENCILFUNC = 38, /* SVGA3dCmpFunc */ + SVGA3D_RS_STENCILFAIL = 39, /* SVGA3dStencilOp */ + SVGA3D_RS_STENCILZFAIL = 40, /* SVGA3dStencilOp */ + SVGA3D_RS_STENCILPASS = 41, /* SVGA3dStencilOp */ + SVGA3D_RS_ALPHAREF = 42, /* float (0.0 .. 1.0) */ + SVGA3D_RS_FRONTWINDING = 43, /* SVGA3dFrontWinding */ + SVGA3D_RS_COORDINATETYPE = 44, /* SVGA3dCoordinateType */ + SVGA3D_RS_ZBIAS = 45, /* float */ + SVGA3D_RS_RANGEFOGENABLE = 46, /* SVGA3dBool */ + SVGA3D_RS_COLORWRITEENABLE = 47, /* SVGA3dColorMask */ + SVGA3D_RS_VERTEXMATERIALENABLE = 48, /* SVGA3dBool */ + SVGA3D_RS_DIFFUSEMATERIALSOURCE = 49, /* SVGA3dVertexMaterial */ + SVGA3D_RS_SPECULARMATERIALSOURCE = 50, /* SVGA3dVertexMaterial */ + SVGA3D_RS_AMBIENTMATERIALSOURCE = 51, /* SVGA3dVertexMaterial */ + SVGA3D_RS_EMISSIVEMATERIALSOURCE = 52, /* SVGA3dVertexMaterial */ + SVGA3D_RS_TEXTUREFACTOR = 53, /* SVGA3dColor */ + SVGA3D_RS_LOCALVIEWER = 54, /* SVGA3dBool */ + SVGA3D_RS_SCISSORTESTENABLE = 55, /* SVGA3dBool */ + SVGA3D_RS_BLENDCOLOR = 56, /* SVGA3dColor */ + SVGA3D_RS_STENCILENABLE2SIDED = 57, /* SVGA3dBool */ + SVGA3D_RS_CCWSTENCILFUNC = 58, /* SVGA3dCmpFunc */ + SVGA3D_RS_CCWSTENCILFAIL = 59, /* SVGA3dStencilOp */ + SVGA3D_RS_CCWSTENCILZFAIL = 60, /* SVGA3dStencilOp */ + SVGA3D_RS_CCWSTENCILPASS = 61, /* SVGA3dStencilOp */ + SVGA3D_RS_VERTEXBLEND = 62, /* SVGA3dVertexBlendFlags */ + SVGA3D_RS_SLOPESCALEDEPTHBIAS = 63, /* float */ + SVGA3D_RS_DEPTHBIAS = 64, /* float */ + + + /* + * Output Gamma Level + * + * Output gamma effects the gamma curve of colors that are output from the + * rendering pipeline. A value of 1.0 specifies a linear color space. If the + * value is <= 0.0, gamma correction is ignored and linear color space is + * used. + */ + + SVGA3D_RS_OUTPUTGAMMA = 65, /* float */ + SVGA3D_RS_ZVISIBLE = 66, /* SVGA3dBool */ + SVGA3D_RS_LASTPIXEL = 67, /* SVGA3dBool */ + SVGA3D_RS_CLIPPING = 68, /* SVGA3dBool */ + SVGA3D_RS_WRAP0 = 69, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP1 = 70, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP2 = 71, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP3 = 72, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP4 = 73, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP5 = 74, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP6 = 75, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP7 = 76, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP8 = 77, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP9 = 78, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP10 = 79, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP11 = 80, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP12 = 81, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP13 = 82, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP14 = 83, /* SVGA3dWrapFlags */ + SVGA3D_RS_WRAP15 = 84, /* SVGA3dWrapFlags */ + SVGA3D_RS_MULTISAMPLEANTIALIAS = 85, /* SVGA3dBool */ + SVGA3D_RS_MULTISAMPLEMASK = 86, /* uint32 */ + SVGA3D_RS_INDEXEDVERTEXBLENDENABLE = 87, /* SVGA3dBool */ + SVGA3D_RS_TWEENFACTOR = 88, /* float */ + SVGA3D_RS_ANTIALIASEDLINEENABLE = 89, /* SVGA3dBool */ + SVGA3D_RS_COLORWRITEENABLE1 = 90, /* SVGA3dColorMask */ + SVGA3D_RS_COLORWRITEENABLE2 = 91, /* SVGA3dColorMask */ + SVGA3D_RS_COLORWRITEENABLE3 = 92, /* SVGA3dColorMask */ + SVGA3D_RS_SEPARATEALPHABLENDENABLE = 93, /* SVGA3dBool */ + SVGA3D_RS_SRCBLENDALPHA = 94, /* SVGA3dBlendOp */ + SVGA3D_RS_DSTBLENDALPHA = 95, /* SVGA3dBlendOp */ + SVGA3D_RS_BLENDEQUATIONALPHA = 96, /* SVGA3dBlendEquation */ + SVGA3D_RS_MAX +} SVGA3dRenderStateName; + +typedef enum { + SVGA3D_VERTEXMATERIAL_NONE = 0, /* Use the value in the current material */ + SVGA3D_VERTEXMATERIAL_DIFFUSE = 1, /* Use the value in the diffuse component */ + SVGA3D_VERTEXMATERIAL_SPECULAR = 2, /* Use the value in the specular component */ +} SVGA3dVertexMaterial; + +typedef enum { + SVGA3D_FILLMODE_INVALID = 0, + SVGA3D_FILLMODE_POINT = 1, + SVGA3D_FILLMODE_LINE = 2, + SVGA3D_FILLMODE_FILL = 3, + SVGA3D_FILLMODE_MAX +} SVGA3dFillModeType; + + +typedef +union { + struct { + uint16 mode; /* SVGA3dFillModeType */ + uint16 face; /* SVGA3dFace */ + }; + uint32 uintValue; +} SVGA3dFillMode; + +typedef enum { + SVGA3D_SHADEMODE_INVALID = 0, + SVGA3D_SHADEMODE_FLAT = 1, + SVGA3D_SHADEMODE_SMOOTH = 2, + SVGA3D_SHADEMODE_PHONG = 3, /* Not supported */ + SVGA3D_SHADEMODE_MAX +} SVGA3dShadeMode; + +typedef +union { + struct { + uint16 repeat; + uint16 pattern; + }; + uint32 uintValue; +} SVGA3dLinePattern; + +typedef enum { + SVGA3D_BLENDOP_INVALID = 0, + SVGA3D_BLENDOP_ZERO = 1, + SVGA3D_BLENDOP_ONE = 2, + SVGA3D_BLENDOP_SRCCOLOR = 3, + SVGA3D_BLENDOP_INVSRCCOLOR = 4, + SVGA3D_BLENDOP_SRCALPHA = 5, + SVGA3D_BLENDOP_INVSRCALPHA = 6, + SVGA3D_BLENDOP_DESTALPHA = 7, + SVGA3D_BLENDOP_INVDESTALPHA = 8, + SVGA3D_BLENDOP_DESTCOLOR = 9, + SVGA3D_BLENDOP_INVDESTCOLOR = 10, + SVGA3D_BLENDOP_SRCALPHASAT = 11, + SVGA3D_BLENDOP_BLENDFACTOR = 12, + SVGA3D_BLENDOP_INVBLENDFACTOR = 13, + SVGA3D_BLENDOP_MAX +} SVGA3dBlendOp; + +typedef enum { + SVGA3D_BLENDEQ_INVALID = 0, + SVGA3D_BLENDEQ_ADD = 1, + SVGA3D_BLENDEQ_SUBTRACT = 2, + SVGA3D_BLENDEQ_REVSUBTRACT = 3, + SVGA3D_BLENDEQ_MINIMUM = 4, + SVGA3D_BLENDEQ_MAXIMUM = 5, + SVGA3D_BLENDEQ_MAX +} SVGA3dBlendEquation; + +typedef enum { + SVGA3D_FRONTWINDING_INVALID = 0, + SVGA3D_FRONTWINDING_CW = 1, + SVGA3D_FRONTWINDING_CCW = 2, + SVGA3D_FRONTWINDING_MAX +} SVGA3dFrontWinding; + +typedef enum { + SVGA3D_FACE_INVALID = 0, + SVGA3D_FACE_NONE = 1, + SVGA3D_FACE_FRONT = 2, + SVGA3D_FACE_BACK = 3, + SVGA3D_FACE_FRONT_BACK = 4, + SVGA3D_FACE_MAX +} SVGA3dFace; + +/* + * The order and the values should not be changed + */ + +typedef enum { + SVGA3D_CMP_INVALID = 0, + SVGA3D_CMP_NEVER = 1, + SVGA3D_CMP_LESS = 2, + SVGA3D_CMP_EQUAL = 3, + SVGA3D_CMP_LESSEQUAL = 4, + SVGA3D_CMP_GREATER = 5, + SVGA3D_CMP_NOTEQUAL = 6, + SVGA3D_CMP_GREATEREQUAL = 7, + SVGA3D_CMP_ALWAYS = 8, + SVGA3D_CMP_MAX +} SVGA3dCmpFunc; + +/* + * SVGA3D_FOGFUNC_* specifies the fog equation, or PER_VERTEX which allows + * the fog factor to be specified in the alpha component of the specular + * (a.k.a. secondary) vertex color. + */ +typedef enum { + SVGA3D_FOGFUNC_INVALID = 0, + SVGA3D_FOGFUNC_EXP = 1, + SVGA3D_FOGFUNC_EXP2 = 2, + SVGA3D_FOGFUNC_LINEAR = 3, + SVGA3D_FOGFUNC_PER_VERTEX = 4 +} SVGA3dFogFunction; + +/* + * SVGA3D_FOGTYPE_* specifies if fog factors are computed on a per-vertex + * or per-pixel basis. + */ +typedef enum { + SVGA3D_FOGTYPE_INVALID = 0, + SVGA3D_FOGTYPE_VERTEX = 1, + SVGA3D_FOGTYPE_PIXEL = 2, + SVGA3D_FOGTYPE_MAX = 3 +} SVGA3dFogType; + +/* + * SVGA3D_FOGBASE_* selects depth or range-based fog. Depth-based fog is + * computed using the eye Z value of each pixel (or vertex), whereas range- + * based fog is computed using the actual distance (range) to the eye. + */ +typedef enum { + SVGA3D_FOGBASE_INVALID = 0, + SVGA3D_FOGBASE_DEPTHBASED = 1, + SVGA3D_FOGBASE_RANGEBASED = 2, + SVGA3D_FOGBASE_MAX = 3 +} SVGA3dFogBase; + +typedef enum { + SVGA3D_STENCILOP_INVALID = 0, + SVGA3D_STENCILOP_KEEP = 1, + SVGA3D_STENCILOP_ZERO = 2, + SVGA3D_STENCILOP_REPLACE = 3, + SVGA3D_STENCILOP_INCRSAT = 4, + SVGA3D_STENCILOP_DECRSAT = 5, + SVGA3D_STENCILOP_INVERT = 6, + SVGA3D_STENCILOP_INCR = 7, + SVGA3D_STENCILOP_DECR = 8, + SVGA3D_STENCILOP_MAX +} SVGA3dStencilOp; + +typedef enum { + SVGA3D_CLIPPLANE_0 = (1 << 0), + SVGA3D_CLIPPLANE_1 = (1 << 1), + SVGA3D_CLIPPLANE_2 = (1 << 2), + SVGA3D_CLIPPLANE_3 = (1 << 3), + SVGA3D_CLIPPLANE_4 = (1 << 4), + SVGA3D_CLIPPLANE_5 = (1 << 5), +} SVGA3dClipPlanes; + +typedef enum { + SVGA3D_CLEAR_COLOR = 0x1, + SVGA3D_CLEAR_DEPTH = 0x2, + SVGA3D_CLEAR_STENCIL = 0x4 +} SVGA3dClearFlag; + +typedef enum { + SVGA3D_RT_DEPTH = 0, + SVGA3D_RT_STENCIL = 1, + SVGA3D_RT_COLOR0 = 2, + SVGA3D_RT_COLOR1 = 3, + SVGA3D_RT_COLOR2 = 4, + SVGA3D_RT_COLOR3 = 5, + SVGA3D_RT_COLOR4 = 6, + SVGA3D_RT_COLOR5 = 7, + SVGA3D_RT_COLOR6 = 8, + SVGA3D_RT_COLOR7 = 9, + SVGA3D_RT_MAX, + SVGA3D_RT_INVALID = ((uint32)-1), +} SVGA3dRenderTargetType; + +#define SVGA3D_MAX_RT_COLOR (SVGA3D_RT_COLOR7 - SVGA3D_RT_COLOR0 + 1) + +typedef +union { + struct { + uint32 red : 1; + uint32 green : 1; + uint32 blue : 1; + uint32 alpha : 1; + }; + uint32 uintValue; +} SVGA3dColorMask; + +typedef enum { + SVGA3D_VBLEND_DISABLE = 0, + SVGA3D_VBLEND_1WEIGHT = 1, + SVGA3D_VBLEND_2WEIGHT = 2, + SVGA3D_VBLEND_3WEIGHT = 3, +} SVGA3dVertexBlendFlags; + +typedef enum { + SVGA3D_WRAPCOORD_0 = 1 << 0, + SVGA3D_WRAPCOORD_1 = 1 << 1, + SVGA3D_WRAPCOORD_2 = 1 << 2, + SVGA3D_WRAPCOORD_3 = 1 << 3, + SVGA3D_WRAPCOORD_ALL = 0xF, +} SVGA3dWrapFlags; + +/* + * SVGA_3D_CMD_TEXTURESTATE Types. All value types + * must fit in a uint32. + */ + +typedef enum { + SVGA3D_TS_INVALID = 0, + SVGA3D_TS_BIND_TEXTURE = 1, /* SVGA3dSurfaceId */ + SVGA3D_TS_COLOROP = 2, /* SVGA3dTextureCombiner */ + SVGA3D_TS_COLORARG1 = 3, /* SVGA3dTextureArgData */ + SVGA3D_TS_COLORARG2 = 4, /* SVGA3dTextureArgData */ + SVGA3D_TS_ALPHAOP = 5, /* SVGA3dTextureCombiner */ + SVGA3D_TS_ALPHAARG1 = 6, /* SVGA3dTextureArgData */ + SVGA3D_TS_ALPHAARG2 = 7, /* SVGA3dTextureArgData */ + SVGA3D_TS_ADDRESSU = 8, /* SVGA3dTextureAddress */ + SVGA3D_TS_ADDRESSV = 9, /* SVGA3dTextureAddress */ + SVGA3D_TS_MIPFILTER = 10, /* SVGA3dTextureFilter */ + SVGA3D_TS_MAGFILTER = 11, /* SVGA3dTextureFilter */ + SVGA3D_TS_MINFILTER = 12, /* SVGA3dTextureFilter */ + SVGA3D_TS_BORDERCOLOR = 13, /* SVGA3dColor */ + SVGA3D_TS_TEXCOORDINDEX = 14, /* uint32 */ + SVGA3D_TS_TEXTURETRANSFORMFLAGS = 15, /* SVGA3dTexTransformFlags */ + SVGA3D_TS_TEXCOORDGEN = 16, /* SVGA3dTextureCoordGen */ + SVGA3D_TS_BUMPENVMAT00 = 17, /* float */ + SVGA3D_TS_BUMPENVMAT01 = 18, /* float */ + SVGA3D_TS_BUMPENVMAT10 = 19, /* float */ + SVGA3D_TS_BUMPENVMAT11 = 20, /* float */ + SVGA3D_TS_TEXTURE_MIPMAP_LEVEL = 21, /* uint32 */ + SVGA3D_TS_TEXTURE_LOD_BIAS = 22, /* float */ + SVGA3D_TS_TEXTURE_ANISOTROPIC_LEVEL = 23, /* uint32 */ + SVGA3D_TS_ADDRESSW = 24, /* SVGA3dTextureAddress */ + + + /* + * Sampler Gamma Level + * + * Sampler gamma effects the color of samples taken from the sampler. A + * value of 1.0 will produce linear samples. If the value is <= 0.0 the + * gamma value is ignored and a linear space is used. + */ + + SVGA3D_TS_GAMMA = 25, /* float */ + SVGA3D_TS_BUMPENVLSCALE = 26, /* float */ + SVGA3D_TS_BUMPENVLOFFSET = 27, /* float */ + SVGA3D_TS_COLORARG0 = 28, /* SVGA3dTextureArgData */ + SVGA3D_TS_ALPHAARG0 = 29, /* SVGA3dTextureArgData */ + SVGA3D_TS_MAX +} SVGA3dTextureStateName; + +typedef enum { + SVGA3D_TC_INVALID = 0, + SVGA3D_TC_DISABLE = 1, + SVGA3D_TC_SELECTARG1 = 2, + SVGA3D_TC_SELECTARG2 = 3, + SVGA3D_TC_MODULATE = 4, + SVGA3D_TC_ADD = 5, + SVGA3D_TC_ADDSIGNED = 6, + SVGA3D_TC_SUBTRACT = 7, + SVGA3D_TC_BLENDTEXTUREALPHA = 8, + SVGA3D_TC_BLENDDIFFUSEALPHA = 9, + SVGA3D_TC_BLENDCURRENTALPHA = 10, + SVGA3D_TC_BLENDFACTORALPHA = 11, + SVGA3D_TC_MODULATE2X = 12, + SVGA3D_TC_MODULATE4X = 13, + SVGA3D_TC_DSDT = 14, + SVGA3D_TC_DOTPRODUCT3 = 15, + SVGA3D_TC_BLENDTEXTUREALPHAPM = 16, + SVGA3D_TC_ADDSIGNED2X = 17, + SVGA3D_TC_ADDSMOOTH = 18, + SVGA3D_TC_PREMODULATE = 19, + SVGA3D_TC_MODULATEALPHA_ADDCOLOR = 20, + SVGA3D_TC_MODULATECOLOR_ADDALPHA = 21, + SVGA3D_TC_MODULATEINVALPHA_ADDCOLOR = 22, + SVGA3D_TC_MODULATEINVCOLOR_ADDALPHA = 23, + SVGA3D_TC_BUMPENVMAPLUMINANCE = 24, + SVGA3D_TC_MULTIPLYADD = 25, + SVGA3D_TC_LERP = 26, + SVGA3D_TC_MAX +} SVGA3dTextureCombiner; + +#define SVGA3D_TC_CAP_BIT(svga3d_tc_op) (svga3d_tc_op ? (1 << (svga3d_tc_op - 1)) : 0) + +typedef enum { + SVGA3D_TEX_ADDRESS_INVALID = 0, + SVGA3D_TEX_ADDRESS_WRAP = 1, + SVGA3D_TEX_ADDRESS_MIRROR = 2, + SVGA3D_TEX_ADDRESS_CLAMP = 3, + SVGA3D_TEX_ADDRESS_BORDER = 4, + SVGA3D_TEX_ADDRESS_MIRRORONCE = 5, + SVGA3D_TEX_ADDRESS_EDGE = 6, + SVGA3D_TEX_ADDRESS_MAX +} SVGA3dTextureAddress; + +/* + * SVGA3D_TEX_FILTER_NONE as the minification filter means mipmapping is + * disabled, and the rasterizer should use the magnification filter instead. + */ +typedef enum { + SVGA3D_TEX_FILTER_NONE = 0, + SVGA3D_TEX_FILTER_NEAREST = 1, + SVGA3D_TEX_FILTER_LINEAR = 2, + SVGA3D_TEX_FILTER_ANISOTROPIC = 3, + SVGA3D_TEX_FILTER_FLATCUBIC = 4, // Deprecated, not implemented + SVGA3D_TEX_FILTER_GAUSSIANCUBIC = 5, // Deprecated, not implemented + SVGA3D_TEX_FILTER_PYRAMIDALQUAD = 6, // Not currently implemented + SVGA3D_TEX_FILTER_GAUSSIANQUAD = 7, // Not currently implemented + SVGA3D_TEX_FILTER_MAX +} SVGA3dTextureFilter; + +typedef enum { + SVGA3D_TEX_TRANSFORM_OFF = 0, + SVGA3D_TEX_TRANSFORM_S = (1 << 0), + SVGA3D_TEX_TRANSFORM_T = (1 << 1), + SVGA3D_TEX_TRANSFORM_R = (1 << 2), + SVGA3D_TEX_TRANSFORM_Q = (1 << 3), + SVGA3D_TEX_PROJECTED = (1 << 15), +} SVGA3dTexTransformFlags; + +typedef enum { + SVGA3D_TEXCOORD_GEN_OFF = 0, + SVGA3D_TEXCOORD_GEN_EYE_POSITION = 1, + SVGA3D_TEXCOORD_GEN_EYE_NORMAL = 2, + SVGA3D_TEXCOORD_GEN_REFLECTIONVECTOR = 3, + SVGA3D_TEXCOORD_GEN_SPHERE = 4, + SVGA3D_TEXCOORD_GEN_MAX +} SVGA3dTextureCoordGen; + +/* + * Texture argument constants for texture combiner + */ +typedef enum { + SVGA3D_TA_INVALID = 0, + SVGA3D_TA_CONSTANT = 1, + SVGA3D_TA_PREVIOUS = 2, + SVGA3D_TA_DIFFUSE = 3, + SVGA3D_TA_TEXTURE = 4, + SVGA3D_TA_SPECULAR = 5, + SVGA3D_TA_MAX +} SVGA3dTextureArgData; + +#define SVGA3D_TM_MASK_LEN 4 + +/* Modifiers for texture argument constants defined above. */ +typedef enum { + SVGA3D_TM_NONE = 0, + SVGA3D_TM_ALPHA = (1 << SVGA3D_TM_MASK_LEN), + SVGA3D_TM_ONE_MINUS = (2 << SVGA3D_TM_MASK_LEN), +} SVGA3dTextureArgModifier; + +#define SVGA3D_INVALID_ID ((uint32)-1) +#define SVGA3D_MAX_CLIP_PLANES 6 + +/* + * This is the limit to the number of fixed-function texture + * transforms and texture coordinates we can support. It does *not* + * correspond to the number of texture image units (samplers) we + * support! + */ +#define SVGA3D_MAX_TEXTURE_COORDS 8 + +/* + * Vertex declarations + * + * Notes: + * + * SVGA3D_DECLUSAGE_POSITIONT is for pre-transformed vertices. If you + * draw with any POSITIONT vertex arrays, the programmable vertex + * pipeline will be implicitly disabled. Drawing will take place as if + * no vertex shader was bound. + */ + +typedef enum { + SVGA3D_DECLUSAGE_POSITION = 0, + SVGA3D_DECLUSAGE_BLENDWEIGHT, // 1 + SVGA3D_DECLUSAGE_BLENDINDICES, // 2 + SVGA3D_DECLUSAGE_NORMAL, // 3 + SVGA3D_DECLUSAGE_PSIZE, // 4 + SVGA3D_DECLUSAGE_TEXCOORD, // 5 + SVGA3D_DECLUSAGE_TANGENT, // 6 + SVGA3D_DECLUSAGE_BINORMAL, // 7 + SVGA3D_DECLUSAGE_TESSFACTOR, // 8 + SVGA3D_DECLUSAGE_POSITIONT, // 9 + SVGA3D_DECLUSAGE_COLOR, // 10 + SVGA3D_DECLUSAGE_FOG, // 11 + SVGA3D_DECLUSAGE_DEPTH, // 12 + SVGA3D_DECLUSAGE_SAMPLE, // 13 + SVGA3D_DECLUSAGE_MAX +} SVGA3dDeclUsage; + +typedef enum { + SVGA3D_DECLMETHOD_DEFAULT = 0, + SVGA3D_DECLMETHOD_PARTIALU, + SVGA3D_DECLMETHOD_PARTIALV, + SVGA3D_DECLMETHOD_CROSSUV, // Normal + SVGA3D_DECLMETHOD_UV, + SVGA3D_DECLMETHOD_LOOKUP, // Lookup a displacement map + SVGA3D_DECLMETHOD_LOOKUPPRESAMPLED, // Lookup a pre-sampled displacement map +} SVGA3dDeclMethod; + +typedef enum { + SVGA3D_DECLTYPE_FLOAT1 = 0, + SVGA3D_DECLTYPE_FLOAT2 = 1, + SVGA3D_DECLTYPE_FLOAT3 = 2, + SVGA3D_DECLTYPE_FLOAT4 = 3, + SVGA3D_DECLTYPE_D3DCOLOR = 4, + SVGA3D_DECLTYPE_UBYTE4 = 5, + SVGA3D_DECLTYPE_SHORT2 = 6, + SVGA3D_DECLTYPE_SHORT4 = 7, + SVGA3D_DECLTYPE_UBYTE4N = 8, + SVGA3D_DECLTYPE_SHORT2N = 9, + SVGA3D_DECLTYPE_SHORT4N = 10, + SVGA3D_DECLTYPE_USHORT2N = 11, + SVGA3D_DECLTYPE_USHORT4N = 12, + SVGA3D_DECLTYPE_UDEC3 = 13, + SVGA3D_DECLTYPE_DEC3N = 14, + SVGA3D_DECLTYPE_FLOAT16_2 = 15, + SVGA3D_DECLTYPE_FLOAT16_4 = 16, + SVGA3D_DECLTYPE_MAX, +} SVGA3dDeclType; + +/* + * This structure is used for the divisor for geometry instancing; + * it's a direct translation of the Direct3D equivalent. + */ +typedef union { + struct { + /* + * For index data, this number represents the number of instances to draw. + * For instance data, this number represents the number of + * instances/vertex in this stream + */ + uint32 count : 30; + + /* + * This is 1 if this is supposed to be the data that is repeated for + * every instance. + */ + uint32 indexedData : 1; + + /* + * This is 1 if this is supposed to be the per-instance data. + */ + uint32 instanceData : 1; + }; + + uint32 value; +} SVGA3dVertexDivisor; + +typedef enum { + SVGA3D_PRIMITIVE_INVALID = 0, + SVGA3D_PRIMITIVE_TRIANGLELIST = 1, + SVGA3D_PRIMITIVE_POINTLIST = 2, + SVGA3D_PRIMITIVE_LINELIST = 3, + SVGA3D_PRIMITIVE_LINESTRIP = 4, + SVGA3D_PRIMITIVE_TRIANGLESTRIP = 5, + SVGA3D_PRIMITIVE_TRIANGLEFAN = 6, + SVGA3D_PRIMITIVE_MAX +} SVGA3dPrimitiveType; + +typedef enum { + SVGA3D_COORDINATE_INVALID = 0, + SVGA3D_COORDINATE_LEFTHANDED = 1, + SVGA3D_COORDINATE_RIGHTHANDED = 2, + SVGA3D_COORDINATE_MAX +} SVGA3dCoordinateType; + +typedef enum { + SVGA3D_TRANSFORM_INVALID = 0, + SVGA3D_TRANSFORM_WORLD = 1, + SVGA3D_TRANSFORM_VIEW = 2, + SVGA3D_TRANSFORM_PROJECTION = 3, + SVGA3D_TRANSFORM_TEXTURE0 = 4, + SVGA3D_TRANSFORM_TEXTURE1 = 5, + SVGA3D_TRANSFORM_TEXTURE2 = 6, + SVGA3D_TRANSFORM_TEXTURE3 = 7, + SVGA3D_TRANSFORM_TEXTURE4 = 8, + SVGA3D_TRANSFORM_TEXTURE5 = 9, + SVGA3D_TRANSFORM_TEXTURE6 = 10, + SVGA3D_TRANSFORM_TEXTURE7 = 11, + SVGA3D_TRANSFORM_WORLD1 = 12, + SVGA3D_TRANSFORM_WORLD2 = 13, + SVGA3D_TRANSFORM_WORLD3 = 14, + SVGA3D_TRANSFORM_MAX +} SVGA3dTransformType; + +typedef enum { + SVGA3D_LIGHTTYPE_INVALID = 0, + SVGA3D_LIGHTTYPE_POINT = 1, + SVGA3D_LIGHTTYPE_SPOT1 = 2, /* 1-cone, in degrees */ + SVGA3D_LIGHTTYPE_SPOT2 = 3, /* 2-cone, in radians */ + SVGA3D_LIGHTTYPE_DIRECTIONAL = 4, + SVGA3D_LIGHTTYPE_MAX +} SVGA3dLightType; + +typedef enum { + SVGA3D_CUBEFACE_POSX = 0, + SVGA3D_CUBEFACE_NEGX = 1, + SVGA3D_CUBEFACE_POSY = 2, + SVGA3D_CUBEFACE_NEGY = 3, + SVGA3D_CUBEFACE_POSZ = 4, + SVGA3D_CUBEFACE_NEGZ = 5, +} SVGA3dCubeFace; + +typedef enum { + SVGA3D_SHADERTYPE_COMPILED_DX8 = 0, + SVGA3D_SHADERTYPE_VS = 1, + SVGA3D_SHADERTYPE_PS = 2, + SVGA3D_SHADERTYPE_MAX +} SVGA3dShaderType; + +typedef enum { + SVGA3D_CONST_TYPE_FLOAT = 0, + SVGA3D_CONST_TYPE_INT = 1, + SVGA3D_CONST_TYPE_BOOL = 2, +} SVGA3dShaderConstType; + +#define SVGA3D_MAX_SURFACE_FACES 6 + +typedef enum { + SVGA3D_STRETCH_BLT_POINT = 0, + SVGA3D_STRETCH_BLT_LINEAR = 1, + SVGA3D_STRETCH_BLT_MAX +} SVGA3dStretchBltMode; + +typedef enum { + SVGA3D_QUERYTYPE_OCCLUSION = 0, + SVGA3D_QUERYTYPE_MAX +} SVGA3dQueryType; + +typedef enum { + SVGA3D_QUERYSTATE_PENDING = 0, /* Waiting on the host (set by guest) */ + SVGA3D_QUERYSTATE_SUCCEEDED = 1, /* Completed successfully (set by host) */ + SVGA3D_QUERYSTATE_FAILED = 2, /* Completed unsuccessfully (set by host) */ + SVGA3D_QUERYSTATE_NEW = 3, /* Never submitted (For guest use only) */ +} SVGA3dQueryState; + +typedef enum { + SVGA3D_WRITE_HOST_VRAM = 1, + SVGA3D_READ_HOST_VRAM = 2, +} SVGA3dTransferType; + +/* + * The maximum number vertex arrays we're guaranteed to support in + * SVGA_3D_CMD_DRAWPRIMITIVES. + */ +#define SVGA3D_MAX_VERTEX_ARRAYS 32 + +/* + * Identifiers for commands in the command FIFO. + * + * IDs between 1000 and 1039 (inclusive) were used by obsolete versions of + * the SVGA3D protocol and remain reserved; they should not be used in the + * future. + * + * IDs between 1040 and 1999 (inclusive) are available for use by the + * current SVGA3D protocol. + * + * FIFO clients other than SVGA3D should stay below 1000, or at 2000 + * and up. + */ + +#define SVGA_3D_CMD_LEGACY_BASE 1000 +#define SVGA_3D_CMD_BASE 1040 + +#define SVGA_3D_CMD_SURFACE_DEFINE SVGA_3D_CMD_BASE + 0 +#define SVGA_3D_CMD_SURFACE_DESTROY SVGA_3D_CMD_BASE + 1 +#define SVGA_3D_CMD_SURFACE_COPY SVGA_3D_CMD_BASE + 2 +#define SVGA_3D_CMD_SURFACE_STRETCHBLT SVGA_3D_CMD_BASE + 3 +#define SVGA_3D_CMD_SURFACE_DMA SVGA_3D_CMD_BASE + 4 +#define SVGA_3D_CMD_CONTEXT_DEFINE SVGA_3D_CMD_BASE + 5 +#define SVGA_3D_CMD_CONTEXT_DESTROY SVGA_3D_CMD_BASE + 6 +#define SVGA_3D_CMD_SETTRANSFORM SVGA_3D_CMD_BASE + 7 +#define SVGA_3D_CMD_SETZRANGE SVGA_3D_CMD_BASE + 8 +#define SVGA_3D_CMD_SETRENDERSTATE SVGA_3D_CMD_BASE + 9 +#define SVGA_3D_CMD_SETRENDERTARGET SVGA_3D_CMD_BASE + 10 +#define SVGA_3D_CMD_SETTEXTURESTATE SVGA_3D_CMD_BASE + 11 +#define SVGA_3D_CMD_SETMATERIAL SVGA_3D_CMD_BASE + 12 +#define SVGA_3D_CMD_SETLIGHTDATA SVGA_3D_CMD_BASE + 13 +#define SVGA_3D_CMD_SETLIGHTENABLED SVGA_3D_CMD_BASE + 14 +#define SVGA_3D_CMD_SETVIEWPORT SVGA_3D_CMD_BASE + 15 +#define SVGA_3D_CMD_SETCLIPPLANE SVGA_3D_CMD_BASE + 16 +#define SVGA_3D_CMD_CLEAR SVGA_3D_CMD_BASE + 17 +#define SVGA_3D_CMD_PRESENT SVGA_3D_CMD_BASE + 18 // Deprecated +#define SVGA_3D_CMD_SHADER_DEFINE SVGA_3D_CMD_BASE + 19 +#define SVGA_3D_CMD_SHADER_DESTROY SVGA_3D_CMD_BASE + 20 +#define SVGA_3D_CMD_SET_SHADER SVGA_3D_CMD_BASE + 21 +#define SVGA_3D_CMD_SET_SHADER_CONST SVGA_3D_CMD_BASE + 22 +#define SVGA_3D_CMD_DRAW_PRIMITIVES SVGA_3D_CMD_BASE + 23 +#define SVGA_3D_CMD_SETSCISSORRECT SVGA_3D_CMD_BASE + 24 +#define SVGA_3D_CMD_BEGIN_QUERY SVGA_3D_CMD_BASE + 25 +#define SVGA_3D_CMD_END_QUERY SVGA_3D_CMD_BASE + 26 +#define SVGA_3D_CMD_WAIT_FOR_QUERY SVGA_3D_CMD_BASE + 27 +#define SVGA_3D_CMD_PRESENT_READBACK SVGA_3D_CMD_BASE + 28 // Deprecated +#define SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN SVGA_3D_CMD_BASE + 29 +#define SVGA_3D_CMD_MAX SVGA_3D_CMD_BASE + 30 + +#define SVGA_3D_CMD_FUTURE_MAX 2000 + +/* + * Common substructures used in multiple FIFO commands: + */ + +typedef struct { + union { + struct { + uint16 function; // SVGA3dFogFunction + uint8 type; // SVGA3dFogType + uint8 base; // SVGA3dFogBase + }; + uint32 uintValue; + }; +} SVGA3dFogMode; + +/* + * Uniquely identify one image (a 1D/2D/3D array) from a surface. This + * is a surface ID as well as face/mipmap indices. + */ + +typedef +struct SVGA3dSurfaceImageId { + uint32 sid; + uint32 face; + uint32 mipmap; +} SVGA3dSurfaceImageId; + +typedef +struct SVGA3dGuestImage { + SVGAGuestPtr ptr; + + /* + * A note on interpretation of pitch: This value of pitch is the + * number of bytes between vertically adjacent image + * blocks. Normally this is the number of bytes between the first + * pixel of two adjacent scanlines. With compressed textures, + * however, this may represent the number of bytes between + * compression blocks rather than between rows of pixels. + * + * XXX: Compressed textures currently must be tightly packed in guest memory. + * + * If the image is 1-dimensional, pitch is ignored. + * + * If 'pitch' is zero, the SVGA3D device calculates a pitch value + * assuming each row of blocks is tightly packed. + */ + uint32 pitch; +} SVGA3dGuestImage; + + +/* + * FIFO command format definitions: + */ + +/* + * The data size header following cmdNum for every 3d command + */ +typedef +struct { + uint32 id; + uint32 size; +} SVGA3dCmdHeader; + +/* + * A surface is a hierarchy of host VRAM surfaces: 1D, 2D, or 3D, with + * optional mipmaps and cube faces. + */ + +typedef +struct { + uint32 width; + uint32 height; + uint32 depth; +} SVGA3dSize; + +typedef enum { + SVGA3D_SURFACE_CUBEMAP = (1 << 0), + SVGA3D_SURFACE_HINT_STATIC = (1 << 1), + SVGA3D_SURFACE_HINT_DYNAMIC = (1 << 2), + SVGA3D_SURFACE_HINT_INDEXBUFFER = (1 << 3), + SVGA3D_SURFACE_HINT_VERTEXBUFFER = (1 << 4), + SVGA3D_SURFACE_HINT_TEXTURE = (1 << 5), + SVGA3D_SURFACE_HINT_RENDERTARGET = (1 << 6), + SVGA3D_SURFACE_HINT_DEPTHSTENCIL = (1 << 7), + SVGA3D_SURFACE_HINT_WRITEONLY = (1 << 8), +} SVGA3dSurfaceFlags; + +typedef +struct { + uint32 numMipLevels; +} SVGA3dSurfaceFace; + +typedef +struct { + uint32 sid; + SVGA3dSurfaceFlags surfaceFlags; + SVGA3dSurfaceFormat format; + SVGA3dSurfaceFace face[SVGA3D_MAX_SURFACE_FACES]; + /* + * Followed by an SVGA3dSize structure for each mip level in each face. + * + * A note on surface sizes: Sizes are always specified in pixels, + * even if the true surface size is not a multiple of the minimum + * block size of the surface's format. For example, a 3x3x1 DXT1 + * compressed texture would actually be stored as a 4x4x1 image in + * memory. + */ +} SVGA3dCmdDefineSurface; /* SVGA_3D_CMD_SURFACE_DEFINE */ + +typedef +struct { + uint32 sid; +} SVGA3dCmdDestroySurface; /* SVGA_3D_CMD_SURFACE_DESTROY */ + +typedef +struct { + uint32 cid; +} SVGA3dCmdDefineContext; /* SVGA_3D_CMD_CONTEXT_DEFINE */ + +typedef +struct { + uint32 cid; +} SVGA3dCmdDestroyContext; /* SVGA_3D_CMD_CONTEXT_DESTROY */ + +typedef +struct { + uint32 cid; + SVGA3dClearFlag clearFlag; + uint32 color; + float depth; + uint32 stencil; + /* Followed by variable number of SVGA3dRect structures */ +} SVGA3dCmdClear; /* SVGA_3D_CMD_CLEAR */ + +typedef +struct SVGA3dCopyRect { + uint32 x; + uint32 y; + uint32 w; + uint32 h; + uint32 srcx; + uint32 srcy; +} SVGA3dCopyRect; + +typedef +struct SVGA3dCopyBox { + uint32 x; + uint32 y; + uint32 z; + uint32 w; + uint32 h; + uint32 d; + uint32 srcx; + uint32 srcy; + uint32 srcz; +} SVGA3dCopyBox; + +typedef +struct { + uint32 x; + uint32 y; + uint32 w; + uint32 h; +} SVGA3dRect; + +typedef +struct { + uint32 x; + uint32 y; + uint32 z; + uint32 w; + uint32 h; + uint32 d; +} SVGA3dBox; + +typedef +struct { + uint32 x; + uint32 y; + uint32 z; +} SVGA3dPoint; + +typedef +struct { + SVGA3dLightType type; + SVGA3dBool inWorldSpace; + float diffuse[4]; + float specular[4]; + float ambient[4]; + float position[4]; + float direction[4]; + float range; + float falloff; + float attenuation0; + float attenuation1; + float attenuation2; + float theta; + float phi; +} SVGA3dLightData; + +typedef +struct { + uint32 sid; + /* Followed by variable number of SVGA3dCopyRect structures */ +} SVGA3dCmdPresent; /* SVGA_3D_CMD_PRESENT */ + +typedef +struct { + SVGA3dRenderStateName state; + union { + uint32 uintValue; + float floatValue; + }; +} SVGA3dRenderState; + +typedef +struct { + uint32 cid; + /* Followed by variable number of SVGA3dRenderState structures */ +} SVGA3dCmdSetRenderState; /* SVGA_3D_CMD_SETRENDERSTATE */ + +typedef +struct { + uint32 cid; + SVGA3dRenderTargetType type; + SVGA3dSurfaceImageId target; +} SVGA3dCmdSetRenderTarget; /* SVGA_3D_CMD_SETRENDERTARGET */ + +typedef +struct { + SVGA3dSurfaceImageId src; + SVGA3dSurfaceImageId dest; + /* Followed by variable number of SVGA3dCopyBox structures */ +} SVGA3dCmdSurfaceCopy; /* SVGA_3D_CMD_SURFACE_COPY */ + +typedef +struct { + SVGA3dSurfaceImageId src; + SVGA3dSurfaceImageId dest; + SVGA3dBox boxSrc; + SVGA3dBox boxDest; + SVGA3dStretchBltMode mode; +} SVGA3dCmdSurfaceStretchBlt; /* SVGA_3D_CMD_SURFACE_STRETCHBLT */ + +typedef +struct { + /* + * If the discard flag is present in a surface DMA operation, the host may + * discard the contents of the current mipmap level and face of the target + * surface before applying the surface DMA contents. + */ + uint32 discard : 1; + + /* + * If the unsynchronized flag is present, the host may perform this upload + * without syncing to pending reads on this surface. + */ + uint32 unsynchronized : 1; + + /* + * Guests *MUST* set the reserved bits to 0 before submitting the command + * suffix as future flags may occupy these bits. + */ + uint32 reserved : 30; +} SVGA3dSurfaceDMAFlags; + +typedef +struct { + SVGA3dGuestImage guest; + SVGA3dSurfaceImageId host; + SVGA3dTransferType transfer; + /* + * Followed by variable number of SVGA3dCopyBox structures. For consistency + * in all clipping logic and coordinate translation, we define the + * "source" in each copyBox as the guest image and the + * "destination" as the host image, regardless of transfer + * direction. + * + * For efficiency, the SVGA3D device is free to copy more data than + * specified. For example, it may round copy boxes outwards such + * that they lie on particular alignment boundaries. + */ +} SVGA3dCmdSurfaceDMA; /* SVGA_3D_CMD_SURFACE_DMA */ + +/* + * SVGA3dCmdSurfaceDMASuffix -- + * + * This is a command suffix that will appear after a SurfaceDMA command in + * the FIFO. It contains some extra information that hosts may use to + * optimize performance or protect the guest. This suffix exists to preserve + * backwards compatibility while also allowing for new functionality to be + * implemented. + */ + +typedef +struct { + uint32 suffixSize; + + /* + * The maximum offset is used to determine the maximum offset from the + * guestPtr base address that will be accessed or written to during this + * surfaceDMA. If the suffix is supported, the host will respect this + * boundary while performing surface DMAs. + * + * Defaults to MAX_UINT32 + */ + uint32 maximumOffset; + + /* + * A set of flags that describes optimizations that the host may perform + * while performing this surface DMA operation. The guest should never rely + * on behaviour that is different when these flags are set for correctness. + * + * Defaults to 0 + */ + SVGA3dSurfaceDMAFlags flags; +} SVGA3dCmdSurfaceDMASuffix; + +/* + * SVGA_3D_CMD_DRAW_PRIMITIVES -- + * + * This command is the SVGA3D device's generic drawing entry point. + * It can draw multiple ranges of primitives, optionally using an + * index buffer, using an arbitrary collection of vertex buffers. + * + * Each SVGA3dVertexDecl defines a distinct vertex array to bind + * during this draw call. The declarations specify which surface + * the vertex data lives in, what that vertex data is used for, + * and how to interpret it. + * + * Each SVGA3dPrimitiveRange defines a collection of primitives + * to render using the same vertex arrays. An index buffer is + * optional. + */ + +typedef +struct { + /* + * A range hint is an optional specification for the range of indices + * in an SVGA3dArray that will be used. If 'last' is zero, it is assumed + * that the entire array will be used. + * + * These are only hints. The SVGA3D device may use them for + * performance optimization if possible, but it's also allowed to + * ignore these values. + */ + uint32 first; + uint32 last; +} SVGA3dArrayRangeHint; + +typedef +struct { + /* + * Define the origin and shape of a vertex or index array. Both + * 'offset' and 'stride' are in bytes. The provided surface will be + * reinterpreted as a flat array of bytes in the same format used + * by surface DMA operations. To avoid unnecessary conversions, the + * surface should be created with the SVGA3D_BUFFER format. + * + * Index 0 in the array starts 'offset' bytes into the surface. + * Index 1 begins at byte 'offset + stride', etc. Array indices may + * not be negative. + */ + uint32 surfaceId; + uint32 offset; + uint32 stride; +} SVGA3dArray; + +typedef +struct { + /* + * Describe a vertex array's data type, and define how it is to be + * used by the fixed function pipeline or the vertex shader. It + * isn't useful to have two VertexDecls with the same + * VertexArrayIdentity in one draw call. + */ + SVGA3dDeclType type; + SVGA3dDeclMethod method; + SVGA3dDeclUsage usage; + uint32 usageIndex; +} SVGA3dVertexArrayIdentity; + +typedef +struct { + SVGA3dVertexArrayIdentity identity; + SVGA3dArray array; + SVGA3dArrayRangeHint rangeHint; +} SVGA3dVertexDecl; + +typedef +struct { + /* + * Define a group of primitives to render, from sequential indices. + * + * The value of 'primitiveType' and 'primitiveCount' imply the + * total number of vertices that will be rendered. + */ + SVGA3dPrimitiveType primType; + uint32 primitiveCount; + + /* + * Optional index buffer. If indexArray.surfaceId is + * SVGA3D_INVALID_ID, we render without an index buffer. Rendering + * without an index buffer is identical to rendering with an index + * buffer containing the sequence [0, 1, 2, 3, ...]. + * + * If an index buffer is in use, indexWidth specifies the width in + * bytes of each index value. It must be less than or equal to + * indexArray.stride. + * + * (Currently, the SVGA3D device requires index buffers to be tightly + * packed. In other words, indexWidth == indexArray.stride) + */ + SVGA3dArray indexArray; + uint32 indexWidth; + + /* + * Optional index bias. This number is added to all indices from + * indexArray before they are used as vertex array indices. This + * can be used in multiple ways: + * + * - When not using an indexArray, this bias can be used to + * specify where in the vertex arrays to begin rendering. + * + * - A positive number here is equivalent to increasing the + * offset in each vertex array. + * + * - A negative number can be used to render using a small + * vertex array and an index buffer that contains large + * values. This may be used by some applications that + * crop a vertex buffer without modifying their index + * buffer. + * + * Note that rendering with a negative bias value may be slower and + * use more memory than rendering with a positive or zero bias. + */ + int32 indexBias; +} SVGA3dPrimitiveRange; + +typedef +struct { + uint32 cid; + uint32 numVertexDecls; + uint32 numRanges; + + /* + * There are two variable size arrays after the + * SVGA3dCmdDrawPrimitives structure. In order, + * they are: + * + * 1. SVGA3dVertexDecl, quantity 'numVertexDecls' + * 2. SVGA3dPrimitiveRange, quantity 'numRanges' + * 3. Optionally, SVGA3dVertexDivisor, quantity 'numVertexDecls' (contains + * the frequency divisor for this the corresponding vertex decl) + */ +} SVGA3dCmdDrawPrimitives; /* SVGA_3D_CMD_DRAWPRIMITIVES */ + +typedef +struct { + uint32 stage; + SVGA3dTextureStateName name; + union { + uint32 value; + float floatValue; + }; +} SVGA3dTextureState; + +typedef +struct { + uint32 cid; + /* Followed by variable number of SVGA3dTextureState structures */ +} SVGA3dCmdSetTextureState; /* SVGA_3D_CMD_SETTEXTURESTATE */ + +typedef +struct { + uint32 cid; + SVGA3dTransformType type; + float matrix[16]; +} SVGA3dCmdSetTransform; /* SVGA_3D_CMD_SETTRANSFORM */ + +typedef +struct { + float min; + float max; +} SVGA3dZRange; + +typedef +struct { + uint32 cid; + SVGA3dZRange zRange; +} SVGA3dCmdSetZRange; /* SVGA_3D_CMD_SETZRANGE */ + +typedef +struct { + float diffuse[4]; + float ambient[4]; + float specular[4]; + float emissive[4]; + float shininess; +} SVGA3dMaterial; + +typedef +struct { + uint32 cid; + SVGA3dFace face; + SVGA3dMaterial material; +} SVGA3dCmdSetMaterial; /* SVGA_3D_CMD_SETMATERIAL */ + +typedef +struct { + uint32 cid; + uint32 index; + SVGA3dLightData data; +} SVGA3dCmdSetLightData; /* SVGA_3D_CMD_SETLIGHTDATA */ + +typedef +struct { + uint32 cid; + uint32 index; + uint32 enabled; +} SVGA3dCmdSetLightEnabled; /* SVGA_3D_CMD_SETLIGHTENABLED */ + +typedef +struct { + uint32 cid; + SVGA3dRect rect; +} SVGA3dCmdSetViewport; /* SVGA_3D_CMD_SETVIEWPORT */ + +typedef +struct { + uint32 cid; + SVGA3dRect rect; +} SVGA3dCmdSetScissorRect; /* SVGA_3D_CMD_SETSCISSORRECT */ + +typedef +struct { + uint32 cid; + uint32 index; + float plane[4]; +} SVGA3dCmdSetClipPlane; /* SVGA_3D_CMD_SETCLIPPLANE */ + +typedef +struct { + uint32 cid; + uint32 shid; + SVGA3dShaderType type; + /* Followed by variable number of DWORDs for shader bycode */ +} SVGA3dCmdDefineShader; /* SVGA_3D_CMD_SHADER_DEFINE */ + +typedef +struct { + uint32 cid; + uint32 shid; + SVGA3dShaderType type; +} SVGA3dCmdDestroyShader; /* SVGA_3D_CMD_SHADER_DESTROY */ + +typedef +struct { + uint32 cid; + uint32 reg; /* register number */ + SVGA3dShaderType type; + SVGA3dShaderConstType ctype; + uint32 values[4]; +} SVGA3dCmdSetShaderConst; /* SVGA_3D_CMD_SET_SHADER_CONST */ + +typedef +struct { + uint32 cid; + SVGA3dShaderType type; + uint32 shid; +} SVGA3dCmdSetShader; /* SVGA_3D_CMD_SET_SHADER */ + +typedef +struct { + uint32 cid; + SVGA3dQueryType type; +} SVGA3dCmdBeginQuery; /* SVGA_3D_CMD_BEGIN_QUERY */ + +typedef +struct { + uint32 cid; + SVGA3dQueryType type; + SVGAGuestPtr guestResult; /* Points to an SVGA3dQueryResult structure */ +} SVGA3dCmdEndQuery; /* SVGA_3D_CMD_END_QUERY */ + +typedef +struct { + uint32 cid; /* Same parameters passed to END_QUERY */ + SVGA3dQueryType type; + SVGAGuestPtr guestResult; +} SVGA3dCmdWaitForQuery; /* SVGA_3D_CMD_WAIT_FOR_QUERY */ + +typedef +struct { + uint32 totalSize; /* Set by guest before query is ended. */ + SVGA3dQueryState state; /* Set by host or guest. See SVGA3dQueryState. */ + union { /* Set by host on exit from PENDING state */ + uint32 result32; + }; +} SVGA3dQueryResult; + +/* + * SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN -- + * + * This is a blit from an SVGA3D surface to a Screen Object. Just + * like GMR-to-screen blits, this blit may be directed at a + * specific screen or to the virtual coordinate space. + * + * The blit copies from a rectangular region of an SVGA3D surface + * image to a rectangular region of a screen or screens. + * + * This command takes an optional variable-length list of clipping + * rectangles after the body of the command. If no rectangles are + * specified, there is no clipping region. The entire destRect is + * drawn to. If one or more rectangles are included, they describe + * a clipping region. The clip rectangle coordinates are measured + * relative to the top-left corner of destRect. + * + * This clipping region serves multiple purposes: + * + * - It can be used to perform an irregularly shaped blit more + * efficiently than by issuing many separate blit commands. + * + * - It is equivalent to allowing blits with non-integer + * source coordinates. You could blit just one half-pixel + * of a source, for example, by specifying a larger + * destination rectangle than you need, then removing + * part of it using a clip rectangle. + * + * Availability: + * SVGA_FIFO_CAP_SCREEN_OBJECT + * + * Limitations: + * + * - Currently, no backend supports blits from a mipmap or face + * other than the first one. + */ + +typedef +struct { + SVGA3dSurfaceImageId srcImage; + SVGASignedRect srcRect; + uint32 destScreenId; /* Screen ID or SVGA_ID_INVALID for virt. coords */ + SVGASignedRect destRect; /* Supports scaling if src/rest different size */ + /* Clipping: zero or more SVGASignedRects follow */ +} SVGA3dCmdBlitSurfaceToScreen; /* SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN */ + + +/* + * Capability query index. + * + * Notes: + * + * 1. SVGA3D_DEVCAP_MAX_TEXTURES reflects the maximum number of + * fixed-function texture units available. Each of these units + * work in both FFP and Shader modes, and they support texture + * transforms and texture coordinates. The host may have additional + * texture image units that are only usable with shaders. + * + * 2. The BUFFER_FORMAT capabilities are deprecated, and they always + * return TRUE. Even on physical hardware that does not support + * these formats natively, the SVGA3D device will provide an emulation + * which should be invisible to the guest OS. + * + * In general, the SVGA3D device should support any operation on + * any surface format, it just may perform some of these + * operations in software depending on the capabilities of the + * available physical hardware. + * + * XXX: In the future, we will add capabilities that describe in + * detail what formats are supported in hardware for what kinds + * of operations. + */ + +typedef enum { + SVGA3D_DEVCAP_3D = 0, + SVGA3D_DEVCAP_MAX_LIGHTS = 1, + SVGA3D_DEVCAP_MAX_TEXTURES = 2, /* See note (1) */ + SVGA3D_DEVCAP_MAX_CLIP_PLANES = 3, + SVGA3D_DEVCAP_VERTEX_SHADER_VERSION = 4, + SVGA3D_DEVCAP_VERTEX_SHADER = 5, + SVGA3D_DEVCAP_FRAGMENT_SHADER_VERSION = 6, + SVGA3D_DEVCAP_FRAGMENT_SHADER = 7, + SVGA3D_DEVCAP_MAX_RENDER_TARGETS = 8, + SVGA3D_DEVCAP_S23E8_TEXTURES = 9, + SVGA3D_DEVCAP_S10E5_TEXTURES = 10, + SVGA3D_DEVCAP_MAX_FIXED_VERTEXBLEND = 11, + SVGA3D_DEVCAP_D16_BUFFER_FORMAT = 12, /* See note (2) */ + SVGA3D_DEVCAP_D24S8_BUFFER_FORMAT = 13, /* See note (2) */ + SVGA3D_DEVCAP_D24X8_BUFFER_FORMAT = 14, /* See note (2) */ + SVGA3D_DEVCAP_QUERY_TYPES = 15, + SVGA3D_DEVCAP_TEXTURE_GRADIENT_SAMPLING = 16, + SVGA3D_DEVCAP_MAX_POINT_SIZE = 17, + SVGA3D_DEVCAP_MAX_SHADER_TEXTURES = 18, + SVGA3D_DEVCAP_MAX_TEXTURE_WIDTH = 19, + SVGA3D_DEVCAP_MAX_TEXTURE_HEIGHT = 20, + SVGA3D_DEVCAP_MAX_VOLUME_EXTENT = 21, + SVGA3D_DEVCAP_MAX_TEXTURE_REPEAT = 22, + SVGA3D_DEVCAP_MAX_TEXTURE_ASPECT_RATIO = 23, + SVGA3D_DEVCAP_MAX_TEXTURE_ANISOTROPY = 24, + SVGA3D_DEVCAP_MAX_PRIMITIVE_COUNT = 25, + SVGA3D_DEVCAP_MAX_VERTEX_INDEX = 26, + SVGA3D_DEVCAP_MAX_VERTEX_SHADER_INSTRUCTIONS = 27, + SVGA3D_DEVCAP_MAX_FRAGMENT_SHADER_INSTRUCTIONS = 28, + SVGA3D_DEVCAP_MAX_VERTEX_SHADER_TEMPS = 29, + SVGA3D_DEVCAP_MAX_FRAGMENT_SHADER_TEMPS = 30, + SVGA3D_DEVCAP_TEXTURE_OPS = 31, + SVGA3D_DEVCAP_SURFACEFMT_X8R8G8B8 = 32, + SVGA3D_DEVCAP_SURFACEFMT_A8R8G8B8 = 33, + SVGA3D_DEVCAP_SURFACEFMT_A2R10G10B10 = 34, + SVGA3D_DEVCAP_SURFACEFMT_X1R5G5B5 = 35, + SVGA3D_DEVCAP_SURFACEFMT_A1R5G5B5 = 36, + SVGA3D_DEVCAP_SURFACEFMT_A4R4G4B4 = 37, + SVGA3D_DEVCAP_SURFACEFMT_R5G6B5 = 38, + SVGA3D_DEVCAP_SURFACEFMT_LUMINANCE16 = 39, + SVGA3D_DEVCAP_SURFACEFMT_LUMINANCE8_ALPHA8 = 40, + SVGA3D_DEVCAP_SURFACEFMT_ALPHA8 = 41, + SVGA3D_DEVCAP_SURFACEFMT_LUMINANCE8 = 42, + SVGA3D_DEVCAP_SURFACEFMT_Z_D16 = 43, + SVGA3D_DEVCAP_SURFACEFMT_Z_D24S8 = 44, + SVGA3D_DEVCAP_SURFACEFMT_Z_D24X8 = 45, + SVGA3D_DEVCAP_SURFACEFMT_DXT1 = 46, + SVGA3D_DEVCAP_SURFACEFMT_DXT2 = 47, + SVGA3D_DEVCAP_SURFACEFMT_DXT3 = 48, + SVGA3D_DEVCAP_SURFACEFMT_DXT4 = 49, + SVGA3D_DEVCAP_SURFACEFMT_DXT5 = 50, + SVGA3D_DEVCAP_SURFACEFMT_BUMPX8L8V8U8 = 51, + SVGA3D_DEVCAP_SURFACEFMT_A2W10V10U10 = 52, + SVGA3D_DEVCAP_SURFACEFMT_BUMPU8V8 = 53, + SVGA3D_DEVCAP_SURFACEFMT_Q8W8V8U8 = 54, + SVGA3D_DEVCAP_SURFACEFMT_CxV8U8 = 55, + SVGA3D_DEVCAP_SURFACEFMT_R_S10E5 = 56, + SVGA3D_DEVCAP_SURFACEFMT_R_S23E8 = 57, + SVGA3D_DEVCAP_SURFACEFMT_RG_S10E5 = 58, + SVGA3D_DEVCAP_SURFACEFMT_RG_S23E8 = 59, + SVGA3D_DEVCAP_SURFACEFMT_ARGB_S10E5 = 60, + SVGA3D_DEVCAP_SURFACEFMT_ARGB_S23E8 = 61, + SVGA3D_DEVCAP_MAX_VERTEX_SHADER_TEXTURES = 63, + + /* + * Note that MAX_SIMULTANEOUS_RENDER_TARGETS is a maximum count of color + * render targets. This does no include the depth or stencil targets. + */ + SVGA3D_DEVCAP_MAX_SIMULTANEOUS_RENDER_TARGETS = 64, + + SVGA3D_DEVCAP_SURFACEFMT_V16U16 = 65, + SVGA3D_DEVCAP_SURFACEFMT_G16R16 = 66, + SVGA3D_DEVCAP_SURFACEFMT_A16B16G16R16 = 67, + SVGA3D_DEVCAP_SURFACEFMT_UYVY = 68, + SVGA3D_DEVCAP_SURFACEFMT_YUY2 = 69, + + /* + * Don't add new caps into the previous section; the values in this + * enumeration must not change. You can put new values right before + * SVGA3D_DEVCAP_MAX. + */ + SVGA3D_DEVCAP_MAX /* This must be the last index. */ +} SVGA3dDevCapIndex; + +typedef union { + Bool b; + uint32 u; + int32 i; + float f; +} SVGA3dDevCapResult; + +#endif /* _SVGA3D_REG_H_ */ diff --git a/drivers/gpu/drm/vmwgfx/svga_escape.h b/drivers/gpu/drm/vmwgfx/svga_escape.h new file mode 100644 index 000000000000..7b85e9b8c854 --- /dev/null +++ b/drivers/gpu/drm/vmwgfx/svga_escape.h @@ -0,0 +1,89 @@ +/********************************************************** + * Copyright 2007-2009 VMware, Inc. All rights reserved. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + **********************************************************/ + +/* + * svga_escape.h -- + * + * Definitions for our own (vendor-specific) SVGA Escape commands. + */ + +#ifndef _SVGA_ESCAPE_H_ +#define _SVGA_ESCAPE_H_ + + +/* + * Namespace IDs for the escape command + */ + +#define SVGA_ESCAPE_NSID_VMWARE 0x00000000 +#define SVGA_ESCAPE_NSID_DEVEL 0xFFFFFFFF + + +/* + * Within SVGA_ESCAPE_NSID_VMWARE, we multiplex commands according to + * the first DWORD of escape data (after the nsID and size). As a + * guideline we're using the high word and low word as a major and + * minor command number, respectively. + * + * Major command number allocation: + * + * 0000: Reserved + * 0001: SVGA_ESCAPE_VMWARE_LOG (svga_binary_logger.h) + * 0002: SVGA_ESCAPE_VMWARE_VIDEO (svga_overlay.h) + * 0003: SVGA_ESCAPE_VMWARE_HINT (svga_escape.h) + */ + +#define SVGA_ESCAPE_VMWARE_MAJOR_MASK 0xFFFF0000 + + +/* + * SVGA Hint commands. + * + * These escapes let the SVGA driver provide optional information to + * he host about the state of the guest or guest applications. The + * host can use these hints to make user interface or performance + * decisions. + * + * Notes: + * + * - SVGA_ESCAPE_VMWARE_HINT_FULLSCREEN is deprecated for guests + * that use the SVGA Screen Object extension. Instead of sending + * this escape, use the SVGA_SCREEN_FULLSCREEN_HINT flag on your + * Screen Object. + */ + +#define SVGA_ESCAPE_VMWARE_HINT 0x00030000 +#define SVGA_ESCAPE_VMWARE_HINT_FULLSCREEN 0x00030001 // Deprecated + +typedef +struct { + uint32 command; + uint32 fullscreen; + struct { + int32 x, y; + } monitorPosition; +} SVGAEscapeHintFullscreen; + +#endif /* _SVGA_ESCAPE_H_ */ diff --git a/drivers/gpu/drm/vmwgfx/svga_overlay.h b/drivers/gpu/drm/vmwgfx/svga_overlay.h new file mode 100644 index 000000000000..f753d73c14b4 --- /dev/null +++ b/drivers/gpu/drm/vmwgfx/svga_overlay.h @@ -0,0 +1,201 @@ +/********************************************************** + * Copyright 2007-2009 VMware, Inc. All rights reserved. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + **********************************************************/ + +/* + * svga_overlay.h -- + * + * Definitions for video-overlay support. + */ + +#ifndef _SVGA_OVERLAY_H_ +#define _SVGA_OVERLAY_H_ + +#include "svga_reg.h" + +/* + * Video formats we support + */ + +#define VMWARE_FOURCC_YV12 0x32315659 // 'Y' 'V' '1' '2' +#define VMWARE_FOURCC_YUY2 0x32595559 // 'Y' 'U' 'Y' '2' +#define VMWARE_FOURCC_UYVY 0x59565955 // 'U' 'Y' 'V' 'Y' + +typedef enum { + SVGA_OVERLAY_FORMAT_INVALID = 0, + SVGA_OVERLAY_FORMAT_YV12 = VMWARE_FOURCC_YV12, + SVGA_OVERLAY_FORMAT_YUY2 = VMWARE_FOURCC_YUY2, + SVGA_OVERLAY_FORMAT_UYVY = VMWARE_FOURCC_UYVY, +} SVGAOverlayFormat; + +#define SVGA_VIDEO_COLORKEY_MASK 0x00ffffff + +#define SVGA_ESCAPE_VMWARE_VIDEO 0x00020000 + +#define SVGA_ESCAPE_VMWARE_VIDEO_SET_REGS 0x00020001 + /* FIFO escape layout: + * Type, Stream Id, (Register Id, Value) pairs */ + +#define SVGA_ESCAPE_VMWARE_VIDEO_FLUSH 0x00020002 + /* FIFO escape layout: + * Type, Stream Id */ + +typedef +struct SVGAEscapeVideoSetRegs { + struct { + uint32 cmdType; + uint32 streamId; + } header; + + // May include zero or more items. + struct { + uint32 registerId; + uint32 value; + } items[1]; +} SVGAEscapeVideoSetRegs; + +typedef +struct SVGAEscapeVideoFlush { + uint32 cmdType; + uint32 streamId; +} SVGAEscapeVideoFlush; + + +/* + * Struct definitions for the video overlay commands built on + * SVGAFifoCmdEscape. + */ +typedef +struct { + uint32 command; + uint32 overlay; +} SVGAFifoEscapeCmdVideoBase; + +typedef +struct { + SVGAFifoEscapeCmdVideoBase videoCmd; +} SVGAFifoEscapeCmdVideoFlush; + +typedef +struct { + SVGAFifoEscapeCmdVideoBase videoCmd; + struct { + uint32 regId; + uint32 value; + } items[1]; +} SVGAFifoEscapeCmdVideoSetRegs; + +typedef +struct { + SVGAFifoEscapeCmdVideoBase videoCmd; + struct { + uint32 regId; + uint32 value; + } items[SVGA_VIDEO_NUM_REGS]; +} SVGAFifoEscapeCmdVideoSetAllRegs; + + +/* + *---------------------------------------------------------------------- + * + * VMwareVideoGetAttributes -- + * + * Computes the size, pitches and offsets for YUV frames. + * + * Results: + * TRUE on success; otherwise FALSE on failure. + * + * Side effects: + * Pitches and offsets for the given YUV frame are put in 'pitches' + * and 'offsets' respectively. They are both optional though. + * + *---------------------------------------------------------------------- + */ + +static inline bool +VMwareVideoGetAttributes(const SVGAOverlayFormat format, // IN + uint32 *width, // IN / OUT + uint32 *height, // IN / OUT + uint32 *size, // OUT + uint32 *pitches, // OUT (optional) + uint32 *offsets) // OUT (optional) +{ + int tmp; + + *width = (*width + 1) & ~1; + + if (offsets) { + offsets[0] = 0; + } + + switch (format) { + case VMWARE_FOURCC_YV12: + *height = (*height + 1) & ~1; + *size = (*width + 3) & ~3; + + if (pitches) { + pitches[0] = *size; + } + + *size *= *height; + + if (offsets) { + offsets[1] = *size; + } + + tmp = ((*width >> 1) + 3) & ~3; + + if (pitches) { + pitches[1] = pitches[2] = tmp; + } + + tmp *= (*height >> 1); + *size += tmp; + + if (offsets) { + offsets[2] = *size; + } + + *size += tmp; + break; + + case VMWARE_FOURCC_YUY2: + case VMWARE_FOURCC_UYVY: + *size = *width * 2; + + if (pitches) { + pitches[0] = *size; + } + + *size *= *height; + break; + + default: + return false; + } + + return true; +} + +#endif // _SVGA_OVERLAY_H_ diff --git a/drivers/gpu/drm/vmwgfx/svga_reg.h b/drivers/gpu/drm/vmwgfx/svga_reg.h new file mode 100644 index 000000000000..1b96c2ec07dd --- /dev/null +++ b/drivers/gpu/drm/vmwgfx/svga_reg.h @@ -0,0 +1,1346 @@ +/********************************************************** + * Copyright 1998-2009 VMware, Inc. All rights reserved. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + **********************************************************/ + +/* + * svga_reg.h -- + * + * Virtual hardware definitions for the VMware SVGA II device. + */ + +#ifndef _SVGA_REG_H_ +#define _SVGA_REG_H_ + +/* + * PCI device IDs. + */ +#define PCI_VENDOR_ID_VMWARE 0x15AD +#define PCI_DEVICE_ID_VMWARE_SVGA2 0x0405 + +/* + * Legal values for the SVGA_REG_CURSOR_ON register in old-fashioned + * cursor bypass mode. This is still supported, but no new guest + * drivers should use it. + */ +#define SVGA_CURSOR_ON_HIDE 0x0 /* Must be 0 to maintain backward compatibility */ +#define SVGA_CURSOR_ON_SHOW 0x1 /* Must be 1 to maintain backward compatibility */ +#define SVGA_CURSOR_ON_REMOVE_FROM_FB 0x2 /* Remove the cursor from the framebuffer because we need to see what's under it */ +#define SVGA_CURSOR_ON_RESTORE_TO_FB 0x3 /* Put the cursor back in the framebuffer so the user can see it */ + +/* + * The maximum framebuffer size that can traced for e.g. guests in VESA mode. + * The changeMap in the monitor is proportional to this number. Therefore, we'd + * like to keep it as small as possible to reduce monitor overhead (using + * SVGA_VRAM_MAX_SIZE for this increases the size of the shared area by over + * 4k!). + * + * NB: For compatibility reasons, this value must be greater than 0xff0000. + * See bug 335072. + */ +#define SVGA_FB_MAX_TRACEABLE_SIZE 0x1000000 + +#define SVGA_MAX_PSEUDOCOLOR_DEPTH 8 +#define SVGA_MAX_PSEUDOCOLORS (1 << SVGA_MAX_PSEUDOCOLOR_DEPTH) +#define SVGA_NUM_PALETTE_REGS (3 * SVGA_MAX_PSEUDOCOLORS) + +#define SVGA_MAGIC 0x900000UL +#define SVGA_MAKE_ID(ver) (SVGA_MAGIC << 8 | (ver)) + +/* Version 2 let the address of the frame buffer be unsigned on Win32 */ +#define SVGA_VERSION_2 2 +#define SVGA_ID_2 SVGA_MAKE_ID(SVGA_VERSION_2) + +/* Version 1 has new registers starting with SVGA_REG_CAPABILITIES so + PALETTE_BASE has moved */ +#define SVGA_VERSION_1 1 +#define SVGA_ID_1 SVGA_MAKE_ID(SVGA_VERSION_1) + +/* Version 0 is the initial version */ +#define SVGA_VERSION_0 0 +#define SVGA_ID_0 SVGA_MAKE_ID(SVGA_VERSION_0) + +/* "Invalid" value for all SVGA IDs. (Version ID, screen object ID, surface ID...) */ +#define SVGA_ID_INVALID 0xFFFFFFFF + +/* Port offsets, relative to BAR0 */ +#define SVGA_INDEX_PORT 0x0 +#define SVGA_VALUE_PORT 0x1 +#define SVGA_BIOS_PORT 0x2 +#define SVGA_IRQSTATUS_PORT 0x8 + +/* + * Interrupt source flags for IRQSTATUS_PORT and IRQMASK. + * + * Interrupts are only supported when the + * SVGA_CAP_IRQMASK capability is present. + */ +#define SVGA_IRQFLAG_ANY_FENCE 0x1 /* Any fence was passed */ +#define SVGA_IRQFLAG_FIFO_PROGRESS 0x2 /* Made forward progress in the FIFO */ +#define SVGA_IRQFLAG_FENCE_GOAL 0x4 /* SVGA_FIFO_FENCE_GOAL reached */ + +/* + * Registers + */ + +enum { + SVGA_REG_ID = 0, + SVGA_REG_ENABLE = 1, + SVGA_REG_WIDTH = 2, + SVGA_REG_HEIGHT = 3, + SVGA_REG_MAX_WIDTH = 4, + SVGA_REG_MAX_HEIGHT = 5, + SVGA_REG_DEPTH = 6, + SVGA_REG_BITS_PER_PIXEL = 7, /* Current bpp in the guest */ + SVGA_REG_PSEUDOCOLOR = 8, + SVGA_REG_RED_MASK = 9, + SVGA_REG_GREEN_MASK = 10, + SVGA_REG_BLUE_MASK = 11, + SVGA_REG_BYTES_PER_LINE = 12, + SVGA_REG_FB_START = 13, /* (Deprecated) */ + SVGA_REG_FB_OFFSET = 14, + SVGA_REG_VRAM_SIZE = 15, + SVGA_REG_FB_SIZE = 16, + + /* ID 0 implementation only had the above registers, then the palette */ + + SVGA_REG_CAPABILITIES = 17, + SVGA_REG_MEM_START = 18, /* (Deprecated) */ + SVGA_REG_MEM_SIZE = 19, + SVGA_REG_CONFIG_DONE = 20, /* Set when memory area configured */ + SVGA_REG_SYNC = 21, /* See "FIFO Synchronization Registers" */ + SVGA_REG_BUSY = 22, /* See "FIFO Synchronization Registers" */ + SVGA_REG_GUEST_ID = 23, /* Set guest OS identifier */ + SVGA_REG_CURSOR_ID = 24, /* (Deprecated) */ + SVGA_REG_CURSOR_X = 25, /* (Deprecated) */ + SVGA_REG_CURSOR_Y = 26, /* (Deprecated) */ + SVGA_REG_CURSOR_ON = 27, /* (Deprecated) */ + SVGA_REG_HOST_BITS_PER_PIXEL = 28, /* (Deprecated) */ + SVGA_REG_SCRATCH_SIZE = 29, /* Number of scratch registers */ + SVGA_REG_MEM_REGS = 30, /* Number of FIFO registers */ + SVGA_REG_NUM_DISPLAYS = 31, /* (Deprecated) */ + SVGA_REG_PITCHLOCK = 32, /* Fixed pitch for all modes */ + SVGA_REG_IRQMASK = 33, /* Interrupt mask */ + + /* Legacy multi-monitor support */ + SVGA_REG_NUM_GUEST_DISPLAYS = 34,/* Number of guest displays in X/Y direction */ + SVGA_REG_DISPLAY_ID = 35, /* Display ID for the following display attributes */ + SVGA_REG_DISPLAY_IS_PRIMARY = 36,/* Whether this is a primary display */ + SVGA_REG_DISPLAY_POSITION_X = 37,/* The display position x */ + SVGA_REG_DISPLAY_POSITION_Y = 38,/* The display position y */ + SVGA_REG_DISPLAY_WIDTH = 39, /* The display's width */ + SVGA_REG_DISPLAY_HEIGHT = 40, /* The display's height */ + + /* See "Guest memory regions" below. */ + SVGA_REG_GMR_ID = 41, + SVGA_REG_GMR_DESCRIPTOR = 42, + SVGA_REG_GMR_MAX_IDS = 43, + SVGA_REG_GMR_MAX_DESCRIPTOR_LENGTH = 44, + + SVGA_REG_TRACES = 45, /* Enable trace-based updates even when FIFO is on */ + SVGA_REG_TOP = 46, /* Must be 1 more than the last register */ + + SVGA_PALETTE_BASE = 1024, /* Base of SVGA color map */ + /* Next 768 (== 256*3) registers exist for colormap */ + + SVGA_SCRATCH_BASE = SVGA_PALETTE_BASE + SVGA_NUM_PALETTE_REGS + /* Base of scratch registers */ + /* Next reg[SVGA_REG_SCRATCH_SIZE] registers exist for scratch usage: + First 4 are reserved for VESA BIOS Extension; any remaining are for + the use of the current SVGA driver. */ +}; + + +/* + * Guest memory regions (GMRs): + * + * This is a new memory mapping feature available in SVGA devices + * which have the SVGA_CAP_GMR bit set. Previously, there were two + * fixed memory regions available with which to share data between the + * device and the driver: the FIFO ('MEM') and the framebuffer. GMRs + * are our name for an extensible way of providing arbitrary DMA + * buffers for use between the driver and the SVGA device. They are a + * new alternative to framebuffer memory, usable for both 2D and 3D + * graphics operations. + * + * Since GMR mapping must be done synchronously with guest CPU + * execution, we use a new pair of SVGA registers: + * + * SVGA_REG_GMR_ID -- + * + * Read/write. + * This register holds the 32-bit ID (a small positive integer) + * of a GMR to create, delete, or redefine. Writing this register + * has no side-effects. + * + * SVGA_REG_GMR_DESCRIPTOR -- + * + * Write-only. + * Writing this register will create, delete, or redefine the GMR + * specified by the above ID register. If this register is zero, + * the GMR is deleted. Any pointers into this GMR (including those + * currently being processed by FIFO commands) will be + * synchronously invalidated. + * + * If this register is nonzero, it must be the physical page + * number (PPN) of a data structure which describes the physical + * layout of the memory region this GMR should describe. The + * descriptor structure will be read synchronously by the SVGA + * device when this register is written. The descriptor need not + * remain allocated for the lifetime of the GMR. + * + * The guest driver should write SVGA_REG_GMR_ID first, then + * SVGA_REG_GMR_DESCRIPTOR. + * + * SVGA_REG_GMR_MAX_IDS -- + * + * Read-only. + * The SVGA device may choose to support a maximum number of + * user-defined GMR IDs. This register holds the number of supported + * IDs. (The maximum supported ID plus 1) + * + * SVGA_REG_GMR_MAX_DESCRIPTOR_LENGTH -- + * + * Read-only. + * The SVGA device may choose to put a limit on the total number + * of SVGAGuestMemDescriptor structures it will read when defining + * a single GMR. + * + * The descriptor structure is an array of SVGAGuestMemDescriptor + * structures. Each structure may do one of three things: + * + * - Terminate the GMR descriptor list. + * (ppn==0, numPages==0) + * + * - Add a PPN or range of PPNs to the GMR's virtual address space. + * (ppn != 0, numPages != 0) + * + * - Provide the PPN of the next SVGAGuestMemDescriptor, in order to + * support multi-page GMR descriptor tables without forcing the + * driver to allocate physically contiguous memory. + * (ppn != 0, numPages == 0) + * + * Note that each physical page of SVGAGuestMemDescriptor structures + * can describe at least 2MB of guest memory. If the driver needs to + * use more than one page of descriptor structures, it must use one of + * its SVGAGuestMemDescriptors to point to an additional page. The + * device will never automatically cross a page boundary. + * + * Once the driver has described a GMR, it is immediately available + * for use via any FIFO command that uses an SVGAGuestPtr structure. + * These pointers include a GMR identifier plus an offset into that + * GMR. + * + * The driver must check the SVGA_CAP_GMR bit before using the GMR + * registers. + */ + +/* + * Special GMR IDs, allowing SVGAGuestPtrs to point to framebuffer + * memory as well. In the future, these IDs could even be used to + * allow legacy memory regions to be redefined by the guest as GMRs. + * + * Using the guest framebuffer (GFB) at BAR1 for general purpose DMA + * is being phased out. Please try to use user-defined GMRs whenever + * possible. + */ +#define SVGA_GMR_NULL ((uint32) -1) +#define SVGA_GMR_FRAMEBUFFER ((uint32) -2) // Guest Framebuffer (GFB) + +typedef +struct SVGAGuestMemDescriptor { + uint32 ppn; + uint32 numPages; +} SVGAGuestMemDescriptor; + +typedef +struct SVGAGuestPtr { + uint32 gmrId; + uint32 offset; +} SVGAGuestPtr; + + +/* + * SVGAGMRImageFormat -- + * + * This is a packed representation of the source 2D image format + * for a GMR-to-screen blit. Currently it is defined as an encoding + * of the screen's color depth and bits-per-pixel, however, 16 bits + * are reserved for future use to identify other encodings (such as + * RGBA or higher-precision images). + * + * Currently supported formats: + * + * bpp depth Format Name + * --- ----- ----------- + * 32 24 32-bit BGRX + * 24 24 24-bit BGR + * 16 16 RGB 5-6-5 + * 16 15 RGB 5-5-5 + * + */ + +typedef +struct SVGAGMRImageFormat { + union { + struct { + uint32 bitsPerPixel : 8; + uint32 colorDepth : 8; + uint32 reserved : 16; // Must be zero + }; + + uint32 value; + }; +} SVGAGMRImageFormat; + +/* + * SVGAColorBGRX -- + * + * A 24-bit color format (BGRX), which does not depend on the + * format of the legacy guest framebuffer (GFB) or the current + * GMRFB state. + */ + +typedef +struct SVGAColorBGRX { + union { + struct { + uint32 b : 8; + uint32 g : 8; + uint32 r : 8; + uint32 x : 8; // Unused + }; + + uint32 value; + }; +} SVGAColorBGRX; + + +/* + * SVGASignedRect -- + * SVGASignedPoint -- + * + * Signed rectangle and point primitives. These are used by the new + * 2D primitives for drawing to Screen Objects, which can occupy a + * signed virtual coordinate space. + * + * SVGASignedRect specifies a half-open interval: the (left, top) + * pixel is part of the rectangle, but the (right, bottom) pixel is + * not. + */ + +typedef +struct SVGASignedRect { + int32 left; + int32 top; + int32 right; + int32 bottom; +} SVGASignedRect; + +typedef +struct SVGASignedPoint { + int32 x; + int32 y; +} SVGASignedPoint; + + +/* + * Capabilities + * + * Note the holes in the bitfield. Missing bits have been deprecated, + * and must not be reused. Those capabilities will never be reported + * by new versions of the SVGA device. + */ + +#define SVGA_CAP_NONE 0x00000000 +#define SVGA_CAP_RECT_COPY 0x00000002 +#define SVGA_CAP_CURSOR 0x00000020 +#define SVGA_CAP_CURSOR_BYPASS 0x00000040 // Legacy (Use Cursor Bypass 3 instead) +#define SVGA_CAP_CURSOR_BYPASS_2 0x00000080 // Legacy (Use Cursor Bypass 3 instead) +#define SVGA_CAP_8BIT_EMULATION 0x00000100 +#define SVGA_CAP_ALPHA_CURSOR 0x00000200 +#define SVGA_CAP_3D 0x00004000 +#define SVGA_CAP_EXTENDED_FIFO 0x00008000 +#define SVGA_CAP_MULTIMON 0x00010000 // Legacy multi-monitor support +#define SVGA_CAP_PITCHLOCK 0x00020000 +#define SVGA_CAP_IRQMASK 0x00040000 +#define SVGA_CAP_DISPLAY_TOPOLOGY 0x00080000 // Legacy multi-monitor support +#define SVGA_CAP_GMR 0x00100000 +#define SVGA_CAP_TRACES 0x00200000 + + +/* + * FIFO register indices. + * + * The FIFO is a chunk of device memory mapped into guest physmem. It + * is always treated as 32-bit words. + * + * The guest driver gets to decide how to partition it between + * - FIFO registers (there are always at least 4, specifying where the + * following data area is and how much data it contains; there may be + * more registers following these, depending on the FIFO protocol + * version in use) + * - FIFO data, written by the guest and slurped out by the VMX. + * These indices are 32-bit word offsets into the FIFO. + */ + +enum { + /* + * Block 1 (basic registers): The originally defined FIFO registers. + * These exist and are valid for all versions of the FIFO protocol. + */ + + SVGA_FIFO_MIN = 0, + SVGA_FIFO_MAX, /* The distance from MIN to MAX must be at least 10K */ + SVGA_FIFO_NEXT_CMD, + SVGA_FIFO_STOP, + + /* + * Block 2 (extended registers): Mandatory registers for the extended + * FIFO. These exist if the SVGA caps register includes + * SVGA_CAP_EXTENDED_FIFO; some of them are valid only if their + * associated capability bit is enabled. + * + * Note that when originally defined, SVGA_CAP_EXTENDED_FIFO implied + * support only for (FIFO registers) CAPABILITIES, FLAGS, and FENCE. + * This means that the guest has to test individually (in most cases + * using FIFO caps) for the presence of registers after this; the VMX + * can define "extended FIFO" to mean whatever it wants, and currently + * won't enable it unless there's room for that set and much more. + */ + + SVGA_FIFO_CAPABILITIES = 4, + SVGA_FIFO_FLAGS, + // Valid with SVGA_FIFO_CAP_FENCE: + SVGA_FIFO_FENCE, + + /* + * Block 3a (optional extended registers): Additional registers for the + * extended FIFO, whose presence isn't actually implied by + * SVGA_CAP_EXTENDED_FIFO; these exist if SVGA_FIFO_MIN is high enough to + * leave room for them. + * + * These in block 3a, the VMX currently considers mandatory for the + * extended FIFO. + */ + + // Valid if exists (i.e. if extended FIFO enabled): + SVGA_FIFO_3D_HWVERSION, /* See SVGA3dHardwareVersion in svga3d_reg.h */ + // Valid with SVGA_FIFO_CAP_PITCHLOCK: + SVGA_FIFO_PITCHLOCK, + + // Valid with SVGA_FIFO_CAP_CURSOR_BYPASS_3: + SVGA_FIFO_CURSOR_ON, /* Cursor bypass 3 show/hide register */ + SVGA_FIFO_CURSOR_X, /* Cursor bypass 3 x register */ + SVGA_FIFO_CURSOR_Y, /* Cursor bypass 3 y register */ + SVGA_FIFO_CURSOR_COUNT, /* Incremented when any of the other 3 change */ + SVGA_FIFO_CURSOR_LAST_UPDATED,/* Last time the host updated the cursor */ + + // Valid with SVGA_FIFO_CAP_RESERVE: + SVGA_FIFO_RESERVED, /* Bytes past NEXT_CMD with real contents */ + + /* + * Valid with SVGA_FIFO_CAP_SCREEN_OBJECT: + * + * By default this is SVGA_ID_INVALID, to indicate that the cursor + * coordinates are specified relative to the virtual root. If this + * is set to a specific screen ID, cursor position is reinterpreted + * as a signed offset relative to that screen's origin. This is the + * only way to place the cursor on a non-rooted screen. + */ + SVGA_FIFO_CURSOR_SCREEN_ID, + + /* + * XXX: The gap here, up until SVGA_FIFO_3D_CAPS, can be used for new + * registers, but this must be done carefully and with judicious use of + * capability bits, since comparisons based on SVGA_FIFO_MIN aren't + * enough to tell you whether the register exists: we've shipped drivers + * and products that used SVGA_FIFO_3D_CAPS but didn't know about some of + * the earlier ones. The actual order of introduction was: + * - PITCHLOCK + * - 3D_CAPS + * - CURSOR_* (cursor bypass 3) + * - RESERVED + * So, code that wants to know whether it can use any of the + * aforementioned registers, or anything else added after PITCHLOCK and + * before 3D_CAPS, needs to reason about something other than + * SVGA_FIFO_MIN. + */ + + /* + * 3D caps block space; valid with 3D hardware version >= + * SVGA3D_HWVERSION_WS6_B1. + */ + SVGA_FIFO_3D_CAPS = 32, + SVGA_FIFO_3D_CAPS_LAST = 32 + 255, + + /* + * End of VMX's current definition of "extended-FIFO registers". + * Registers before here are always enabled/disabled as a block; either + * the extended FIFO is enabled and includes all preceding registers, or + * it's disabled entirely. + * + * Block 3b (truly optional extended registers): Additional registers for + * the extended FIFO, which the VMX already knows how to enable and + * disable with correct granularity. + * + * Registers after here exist if and only if the guest SVGA driver + * sets SVGA_FIFO_MIN high enough to leave room for them. + */ + + // Valid if register exists: + SVGA_FIFO_GUEST_3D_HWVERSION, /* Guest driver's 3D version */ + SVGA_FIFO_FENCE_GOAL, /* Matching target for SVGA_IRQFLAG_FENCE_GOAL */ + SVGA_FIFO_BUSY, /* See "FIFO Synchronization Registers" */ + + /* + * Always keep this last. This defines the maximum number of + * registers we know about. At power-on, this value is placed in + * the SVGA_REG_MEM_REGS register, and we expect the guest driver + * to allocate this much space in FIFO memory for registers. + */ + SVGA_FIFO_NUM_REGS +}; + + +/* + * Definition of registers included in extended FIFO support. + * + * The guest SVGA driver gets to allocate the FIFO between registers + * and data. It must always allocate at least 4 registers, but old + * drivers stopped there. + * + * The VMX will enable extended FIFO support if and only if the guest + * left enough room for all registers defined as part of the mandatory + * set for the extended FIFO. + * + * Note that the guest drivers typically allocate the FIFO only at + * initialization time, not at mode switches, so it's likely that the + * number of FIFO registers won't change without a reboot. + * + * All registers less than this value are guaranteed to be present if + * svgaUser->fifo.extended is set. Any later registers must be tested + * individually for compatibility at each use (in the VMX). + * + * This value is used only by the VMX, so it can change without + * affecting driver compatibility; keep it that way? + */ +#define SVGA_FIFO_EXTENDED_MANDATORY_REGS (SVGA_FIFO_3D_CAPS_LAST + 1) + + +/* + * FIFO Synchronization Registers + * + * This explains the relationship between the various FIFO + * sync-related registers in IOSpace and in FIFO space. + * + * SVGA_REG_SYNC -- + * + * The SYNC register can be used in two different ways by the guest: + * + * 1. If the guest wishes to fully sync (drain) the FIFO, + * it will write once to SYNC then poll on the BUSY + * register. The FIFO is sync'ed once BUSY is zero. + * + * 2. If the guest wants to asynchronously wake up the host, + * it will write once to SYNC without polling on BUSY. + * Ideally it will do this after some new commands have + * been placed in the FIFO, and after reading a zero + * from SVGA_FIFO_BUSY. + * + * (1) is the original behaviour that SYNC was designed to + * support. Originally, a write to SYNC would implicitly + * trigger a read from BUSY. This causes us to synchronously + * process the FIFO. + * + * This behaviour has since been changed so that writing SYNC + * will *not* implicitly cause a read from BUSY. Instead, it + * makes a channel call which asynchronously wakes up the MKS + * thread. + * + * New guests can use this new behaviour to implement (2) + * efficiently. This lets guests get the host's attention + * without waiting for the MKS to poll, which gives us much + * better CPU utilization on SMP hosts and on UP hosts while + * we're blocked on the host GPU. + * + * Old guests shouldn't notice the behaviour change. SYNC was + * never guaranteed to process the entire FIFO, since it was + * bounded to a particular number of CPU cycles. Old guests will + * still loop on the BUSY register until the FIFO is empty. + * + * Writing to SYNC currently has the following side-effects: + * + * - Sets SVGA_REG_BUSY to TRUE (in the monitor) + * - Asynchronously wakes up the MKS thread for FIFO processing + * - The value written to SYNC is recorded as a "reason", for + * stats purposes. + * + * If SVGA_FIFO_BUSY is available, drivers are advised to only + * write to SYNC if SVGA_FIFO_BUSY is FALSE. Drivers should set + * SVGA_FIFO_BUSY to TRUE after writing to SYNC. The MKS will + * eventually set SVGA_FIFO_BUSY on its own, but this approach + * lets the driver avoid sending multiple asynchronous wakeup + * messages to the MKS thread. + * + * SVGA_REG_BUSY -- + * + * This register is set to TRUE when SVGA_REG_SYNC is written, + * and it reads as FALSE when the FIFO has been completely + * drained. + * + * Every read from this register causes us to synchronously + * process FIFO commands. There is no guarantee as to how many + * commands each read will process. + * + * CPU time spent processing FIFO commands will be billed to + * the guest. + * + * New drivers should avoid using this register unless they + * need to guarantee that the FIFO is completely drained. It + * is overkill for performing a sync-to-fence. Older drivers + * will use this register for any type of synchronization. + * + * SVGA_FIFO_BUSY -- + * + * This register is a fast way for the guest driver to check + * whether the FIFO is already being processed. It reads and + * writes at normal RAM speeds, with no monitor intervention. + * + * If this register reads as TRUE, the host is guaranteeing that + * any new commands written into the FIFO will be noticed before + * the MKS goes back to sleep. + * + * If this register reads as FALSE, no such guarantee can be + * made. + * + * The guest should use this register to quickly determine + * whether or not it needs to wake up the host. If the guest + * just wrote a command or group of commands that it would like + * the host to begin processing, it should: + * + * 1. Read SVGA_FIFO_BUSY. If it reads as TRUE, no further + * action is necessary. + * + * 2. Write TRUE to SVGA_FIFO_BUSY. This informs future guest + * code that we've already sent a SYNC to the host and we + * don't need to send a duplicate. + * + * 3. Write a reason to SVGA_REG_SYNC. This will send an + * asynchronous wakeup to the MKS thread. + */ + + +/* + * FIFO Capabilities + * + * Fence -- Fence register and command are supported + * Accel Front -- Front buffer only commands are supported + * Pitch Lock -- Pitch lock register is supported + * Video -- SVGA Video overlay units are supported + * Escape -- Escape command is supported + * + * XXX: Add longer descriptions for each capability, including a list + * of the new features that each capability provides. + * + * SVGA_FIFO_CAP_SCREEN_OBJECT -- + * + * Provides dynamic multi-screen rendering, for improved Unity and + * multi-monitor modes. With Screen Object, the guest can + * dynamically create and destroy 'screens', which can represent + * Unity windows or virtual monitors. Screen Object also provides + * strong guarantees that DMA operations happen only when + * guest-initiated. Screen Object deprecates the BAR1 guest + * framebuffer (GFB) and all commands that work only with the GFB. + * + * New registers: + * FIFO_CURSOR_SCREEN_ID, VIDEO_DATA_GMRID, VIDEO_DST_SCREEN_ID + * + * New 2D commands: + * DEFINE_SCREEN, DESTROY_SCREEN, DEFINE_GMRFB, BLIT_GMRFB_TO_SCREEN, + * BLIT_SCREEN_TO_GMRFB, ANNOTATION_FILL, ANNOTATION_COPY + * + * New 3D commands: + * BLIT_SURFACE_TO_SCREEN + * + * New guarantees: + * + * - The host will not read or write guest memory, including the GFB, + * except when explicitly initiated by a DMA command. + * + * - All DMA, including legacy DMA like UPDATE and PRESENT_READBACK, + * is guaranteed to complete before any subsequent FENCEs. + * + * - All legacy commands which affect a Screen (UPDATE, PRESENT, + * PRESENT_READBACK) as well as new Screen blit commands will + * all behave consistently as blits, and memory will be read + * or written in FIFO order. + * + * For example, if you PRESENT from one SVGA3D surface to multiple + * places on the screen, the data copied will always be from the + * SVGA3D surface at the time the PRESENT was issued in the FIFO. + * This was not necessarily true on devices without Screen Object. + * + * This means that on devices that support Screen Object, the + * PRESENT_READBACK command should not be necessary unless you + * actually want to read back the results of 3D rendering into + * system memory. (And for that, the BLIT_SCREEN_TO_GMRFB + * command provides a strict superset of functionality.) + * + * - When a screen is resized, either using Screen Object commands or + * legacy multimon registers, its contents are preserved. + */ + +#define SVGA_FIFO_CAP_NONE 0 +#define SVGA_FIFO_CAP_FENCE (1<<0) +#define SVGA_FIFO_CAP_ACCELFRONT (1<<1) +#define SVGA_FIFO_CAP_PITCHLOCK (1<<2) +#define SVGA_FIFO_CAP_VIDEO (1<<3) +#define SVGA_FIFO_CAP_CURSOR_BYPASS_3 (1<<4) +#define SVGA_FIFO_CAP_ESCAPE (1<<5) +#define SVGA_FIFO_CAP_RESERVE (1<<6) +#define SVGA_FIFO_CAP_SCREEN_OBJECT (1<<7) + + +/* + * FIFO Flags + * + * Accel Front -- Driver should use front buffer only commands + */ + +#define SVGA_FIFO_FLAG_NONE 0 +#define SVGA_FIFO_FLAG_ACCELFRONT (1<<0) +#define SVGA_FIFO_FLAG_RESERVED (1<<31) // Internal use only + +/* + * FIFO reservation sentinel value + */ + +#define SVGA_FIFO_RESERVED_UNKNOWN 0xffffffff + + +/* + * Video overlay support + */ + +#define SVGA_NUM_OVERLAY_UNITS 32 + + +/* + * Video capabilities that the guest is currently using + */ + +#define SVGA_VIDEO_FLAG_COLORKEY 0x0001 + + +/* + * Offsets for the video overlay registers + */ + +enum { + SVGA_VIDEO_ENABLED = 0, + SVGA_VIDEO_FLAGS, + SVGA_VIDEO_DATA_OFFSET, + SVGA_VIDEO_FORMAT, + SVGA_VIDEO_COLORKEY, + SVGA_VIDEO_SIZE, // Deprecated + SVGA_VIDEO_WIDTH, + SVGA_VIDEO_HEIGHT, + SVGA_VIDEO_SRC_X, + SVGA_VIDEO_SRC_Y, + SVGA_VIDEO_SRC_WIDTH, + SVGA_VIDEO_SRC_HEIGHT, + SVGA_VIDEO_DST_X, // Signed int32 + SVGA_VIDEO_DST_Y, // Signed int32 + SVGA_VIDEO_DST_WIDTH, + SVGA_VIDEO_DST_HEIGHT, + SVGA_VIDEO_PITCH_1, + SVGA_VIDEO_PITCH_2, + SVGA_VIDEO_PITCH_3, + SVGA_VIDEO_DATA_GMRID, // Optional, defaults to SVGA_GMR_FRAMEBUFFER + SVGA_VIDEO_DST_SCREEN_ID, // Optional, defaults to virtual coords (SVGA_ID_INVALID) + SVGA_VIDEO_NUM_REGS +}; + + +/* + * SVGA Overlay Units + * + * width and height relate to the entire source video frame. + * srcX, srcY, srcWidth and srcHeight represent subset of the source + * video frame to be displayed. + */ + +typedef struct SVGAOverlayUnit { + uint32 enabled; + uint32 flags; + uint32 dataOffset; + uint32 format; + uint32 colorKey; + uint32 size; + uint32 width; + uint32 height; + uint32 srcX; + uint32 srcY; + uint32 srcWidth; + uint32 srcHeight; + int32 dstX; + int32 dstY; + uint32 dstWidth; + uint32 dstHeight; + uint32 pitches[3]; + uint32 dataGMRId; + uint32 dstScreenId; +} SVGAOverlayUnit; + + +/* + * SVGAScreenObject -- + * + * This is a new way to represent a guest's multi-monitor screen or + * Unity window. Screen objects are only supported if the + * SVGA_FIFO_CAP_SCREEN_OBJECT capability bit is set. + * + * If Screen Objects are supported, they can be used to fully + * replace the functionality provided by the framebuffer registers + * (SVGA_REG_WIDTH, HEIGHT, etc.) and by SVGA_CAP_DISPLAY_TOPOLOGY. + * + * The screen object is a struct with guaranteed binary + * compatibility. New flags can be added, and the struct may grow, + * but existing fields must retain their meaning. + * + */ + +#define SVGA_SCREEN_HAS_ROOT (1 << 0) // Screen is present in the virtual coord space +#define SVGA_SCREEN_IS_PRIMARY (1 << 1) // Guest considers this screen to be 'primary' +#define SVGA_SCREEN_FULLSCREEN_HINT (1 << 2) // Guest is running a fullscreen app here + +typedef +struct SVGAScreenObject { + uint32 structSize; // sizeof(SVGAScreenObject) + uint32 id; + uint32 flags; + struct { + uint32 width; + uint32 height; + } size; + struct { + int32 x; + int32 y; + } root; // Only used if SVGA_SCREEN_HAS_ROOT is set. +} SVGAScreenObject; + + +/* + * Commands in the command FIFO: + * + * Command IDs defined below are used for the traditional 2D FIFO + * communication (not all commands are available for all versions of the + * SVGA FIFO protocol). + * + * Note the holes in the command ID numbers: These commands have been + * deprecated, and the old IDs must not be reused. + * + * Command IDs from 1000 to 1999 are reserved for use by the SVGA3D + * protocol. + * + * Each command's parameters are described by the comments and + * structs below. + */ + +typedef enum { + SVGA_CMD_INVALID_CMD = 0, + SVGA_CMD_UPDATE = 1, + SVGA_CMD_RECT_COPY = 3, + SVGA_CMD_DEFINE_CURSOR = 19, + SVGA_CMD_DEFINE_ALPHA_CURSOR = 22, + SVGA_CMD_UPDATE_VERBOSE = 25, + SVGA_CMD_FRONT_ROP_FILL = 29, + SVGA_CMD_FENCE = 30, + SVGA_CMD_ESCAPE = 33, + SVGA_CMD_DEFINE_SCREEN = 34, + SVGA_CMD_DESTROY_SCREEN = 35, + SVGA_CMD_DEFINE_GMRFB = 36, + SVGA_CMD_BLIT_GMRFB_TO_SCREEN = 37, + SVGA_CMD_BLIT_SCREEN_TO_GMRFB = 38, + SVGA_CMD_ANNOTATION_FILL = 39, + SVGA_CMD_ANNOTATION_COPY = 40, + SVGA_CMD_MAX +} SVGAFifoCmdId; + +#define SVGA_CMD_MAX_ARGS 64 + + +/* + * SVGA_CMD_UPDATE -- + * + * This is a DMA transfer which copies from the Guest Framebuffer + * (GFB) at BAR1 + SVGA_REG_FB_OFFSET to any screens which + * intersect with the provided virtual rectangle. + * + * This command does not support using arbitrary guest memory as a + * data source- it only works with the pre-defined GFB memory. + * This command also does not support signed virtual coordinates. + * If you have defined screens (using SVGA_CMD_DEFINE_SCREEN) with + * negative root x/y coordinates, the negative portion of those + * screens will not be reachable by this command. + * + * This command is not necessary when using framebuffer + * traces. Traces are automatically enabled if the SVGA FIFO is + * disabled, and you may explicitly enable/disable traces using + * SVGA_REG_TRACES. With traces enabled, any write to the GFB will + * automatically act as if a subsequent SVGA_CMD_UPDATE was issued. + * + * Traces and SVGA_CMD_UPDATE are the only supported ways to render + * pseudocolor screen updates. The newer Screen Object commands + * only support true color formats. + * + * Availability: + * Always available. + */ + +typedef +struct { + uint32 x; + uint32 y; + uint32 width; + uint32 height; +} SVGAFifoCmdUpdate; + + +/* + * SVGA_CMD_RECT_COPY -- + * + * Perform a rectangular DMA transfer from one area of the GFB to + * another, and copy the result to any screens which intersect it. + * + * Availability: + * SVGA_CAP_RECT_COPY + */ + +typedef +struct { + uint32 srcX; + uint32 srcY; + uint32 destX; + uint32 destY; + uint32 width; + uint32 height; +} SVGAFifoCmdRectCopy; + + +/* + * SVGA_CMD_DEFINE_CURSOR -- + * + * Provide a new cursor image, as an AND/XOR mask. + * + * The recommended way to position the cursor overlay is by using + * the SVGA_FIFO_CURSOR_* registers, supported by the + * SVGA_FIFO_CAP_CURSOR_BYPASS_3 capability. + * + * Availability: + * SVGA_CAP_CURSOR + */ + +typedef +struct { + uint32 id; // Reserved, must be zero. + uint32 hotspotX; + uint32 hotspotY; + uint32 width; + uint32 height; + uint32 andMaskDepth; // Value must be 1 or equal to BITS_PER_PIXEL + uint32 xorMaskDepth; // Value must be 1 or equal to BITS_PER_PIXEL + /* + * Followed by scanline data for AND mask, then XOR mask. + * Each scanline is padded to a 32-bit boundary. + */ +} SVGAFifoCmdDefineCursor; + + +/* + * SVGA_CMD_DEFINE_ALPHA_CURSOR -- + * + * Provide a new cursor image, in 32-bit BGRA format. + * + * The recommended way to position the cursor overlay is by using + * the SVGA_FIFO_CURSOR_* registers, supported by the + * SVGA_FIFO_CAP_CURSOR_BYPASS_3 capability. + * + * Availability: + * SVGA_CAP_ALPHA_CURSOR + */ + +typedef +struct { + uint32 id; // Reserved, must be zero. + uint32 hotspotX; + uint32 hotspotY; + uint32 width; + uint32 height; + /* Followed by scanline data */ +} SVGAFifoCmdDefineAlphaCursor; + + +/* + * SVGA_CMD_UPDATE_VERBOSE -- + * + * Just like SVGA_CMD_UPDATE, but also provide a per-rectangle + * 'reason' value, an opaque cookie which is used by internal + * debugging tools. Third party drivers should not use this + * command. + * + * Availability: + * SVGA_CAP_EXTENDED_FIFO + */ + +typedef +struct { + uint32 x; + uint32 y; + uint32 width; + uint32 height; + uint32 reason; +} SVGAFifoCmdUpdateVerbose; + + +/* + * SVGA_CMD_FRONT_ROP_FILL -- + * + * This is a hint which tells the SVGA device that the driver has + * just filled a rectangular region of the GFB with a solid + * color. Instead of reading these pixels from the GFB, the device + * can assume that they all equal 'color'. This is primarily used + * for remote desktop protocols. + * + * Availability: + * SVGA_FIFO_CAP_ACCELFRONT + */ + +#define SVGA_ROP_COPY 0x03 + +typedef +struct { + uint32 color; // In the same format as the GFB + uint32 x; + uint32 y; + uint32 width; + uint32 height; + uint32 rop; // Must be SVGA_ROP_COPY +} SVGAFifoCmdFrontRopFill; + + +/* + * SVGA_CMD_FENCE -- + * + * Insert a synchronization fence. When the SVGA device reaches + * this command, it will copy the 'fence' value into the + * SVGA_FIFO_FENCE register. It will also compare the fence against + * SVGA_FIFO_FENCE_GOAL. If the fence matches the goal and the + * SVGA_IRQFLAG_FENCE_GOAL interrupt is enabled, the device will + * raise this interrupt. + * + * Availability: + * SVGA_FIFO_FENCE for this command, + * SVGA_CAP_IRQMASK for SVGA_FIFO_FENCE_GOAL. + */ + +typedef +struct { + uint32 fence; +} SVGAFifoCmdFence; + + +/* + * SVGA_CMD_ESCAPE -- + * + * Send an extended or vendor-specific variable length command. + * This is used for video overlay, third party plugins, and + * internal debugging tools. See svga_escape.h + * + * Availability: + * SVGA_FIFO_CAP_ESCAPE + */ + +typedef +struct { + uint32 nsid; + uint32 size; + /* followed by 'size' bytes of data */ +} SVGAFifoCmdEscape; + + +/* + * SVGA_CMD_DEFINE_SCREEN -- + * + * Define or redefine an SVGAScreenObject. See the description of + * SVGAScreenObject above. The video driver is responsible for + * generating new screen IDs. They should be small positive + * integers. The virtual device will have an implementation + * specific upper limit on the number of screen IDs + * supported. Drivers are responsible for recycling IDs. The first + * valid ID is zero. + * + * - Interaction with other registers: + * + * For backwards compatibility, when the GFB mode registers (WIDTH, + * HEIGHT, PITCHLOCK, BITS_PER_PIXEL) are modified, the SVGA device + * deletes all screens other than screen #0, and redefines screen + * #0 according to the specified mode. Drivers that use + * SVGA_CMD_DEFINE_SCREEN should destroy or redefine screen #0. + * + * If you use screen objects, do not use the legacy multi-mon + * registers (SVGA_REG_NUM_GUEST_DISPLAYS, SVGA_REG_DISPLAY_*). + * + * Availability: + * SVGA_FIFO_CAP_SCREEN_OBJECT + */ + +typedef +struct { + SVGAScreenObject screen; // Variable-length according to version +} SVGAFifoCmdDefineScreen; + + +/* + * SVGA_CMD_DESTROY_SCREEN -- + * + * Destroy an SVGAScreenObject. Its ID is immediately available for + * re-use. + * + * Availability: + * SVGA_FIFO_CAP_SCREEN_OBJECT + */ + +typedef +struct { + uint32 screenId; +} SVGAFifoCmdDestroyScreen; + + +/* + * SVGA_CMD_DEFINE_GMRFB -- + * + * This command sets a piece of SVGA device state called the + * Guest Memory Region Framebuffer, or GMRFB. The GMRFB is a + * piece of light-weight state which identifies the location and + * format of an image in guest memory or in BAR1. The GMRFB has + * an arbitrary size, and it doesn't need to match the geometry + * of the GFB or any screen object. + * + * The GMRFB can be redefined as often as you like. You could + * always use the same GMRFB, you could redefine it before + * rendering from a different guest screen, or you could even + * redefine it before every blit. + * + * There are multiple ways to use this command. The simplest way is + * to use it to move the framebuffer either to elsewhere in the GFB + * (BAR1) memory region, or to a user-defined GMR. This lets a + * driver use a framebuffer allocated entirely out of normal system + * memory, which we encourage. + * + * Another way to use this command is to set up a ring buffer of + * updates in GFB memory. If a driver wants to ensure that no + * frames are skipped by the SVGA device, it is important that the + * driver not modify the source data for a blit until the device is + * done processing the command. One efficient way to accomplish + * this is to use a ring of small DMA buffers. Each buffer is used + * for one blit, then we move on to the next buffer in the + * ring. The FENCE mechanism is used to protect each buffer from + * re-use until the device is finished with that buffer's + * corresponding blit. + * + * This command does not affect the meaning of SVGA_CMD_UPDATE. + * UPDATEs always occur from the legacy GFB memory area. This + * command has no support for pseudocolor GMRFBs. Currently only + * true-color 15, 16, and 24-bit depths are supported. Future + * devices may expose capabilities for additional framebuffer + * formats. + * + * The default GMRFB value is undefined. Drivers must always send + * this command at least once before performing any blit from the + * GMRFB. + * + * Availability: + * SVGA_FIFO_CAP_SCREEN_OBJECT + */ + +typedef +struct { + SVGAGuestPtr ptr; + uint32 bytesPerLine; + SVGAGMRImageFormat format; +} SVGAFifoCmdDefineGMRFB; + + +/* + * SVGA_CMD_BLIT_GMRFB_TO_SCREEN -- + * + * This is a guest-to-host blit. It performs a DMA operation to + * copy a rectangular region of pixels from the current GMRFB to + * one or more Screen Objects. + * + * The destination coordinate may be specified relative to a + * screen's origin (if a screen ID is specified) or relative to the + * virtual coordinate system's origin (if the screen ID is + * SVGA_ID_INVALID). The actual destination may span zero or more + * screens, in the case of a virtual destination rect or a rect + * which extends off the edge of the specified screen. + * + * This command writes to the screen's "base layer": the underlying + * framebuffer which exists below any cursor or video overlays. No + * action is necessary to explicitly hide or update any overlays + * which exist on top of the updated region. + * + * The SVGA device is guaranteed to finish reading from the GMRFB + * by the time any subsequent FENCE commands are reached. + * + * This command consumes an annotation. See the + * SVGA_CMD_ANNOTATION_* commands for details. + * + * Availability: + * SVGA_FIFO_CAP_SCREEN_OBJECT + */ + +typedef +struct { + SVGASignedPoint srcOrigin; + SVGASignedRect destRect; + uint32 destScreenId; +} SVGAFifoCmdBlitGMRFBToScreen; + + +/* + * SVGA_CMD_BLIT_SCREEN_TO_GMRFB -- + * + * This is a host-to-guest blit. It performs a DMA operation to + * copy a rectangular region of pixels from a single Screen Object + * back to the current GMRFB. + * + * Usage note: This command should be used rarely. It will + * typically be inefficient, but it is necessary for some types of + * synchronization between 3D (GPU) and 2D (CPU) rendering into + * overlapping areas of a screen. + * + * The source coordinate is specified relative to a screen's + * origin. The provided screen ID must be valid. If any parameters + * are invalid, the resulting pixel values are undefined. + * + * This command reads the screen's "base layer". Overlays like + * video and cursor are not included, but any data which was sent + * using a blit-to-screen primitive will be available, no matter + * whether the data's original source was the GMRFB or the 3D + * acceleration hardware. + * + * Note that our guest-to-host blits and host-to-guest blits aren't + * symmetric in their current implementation. While the parameters + * are identical, host-to-guest blits are a lot less featureful. + * They do not support clipping: If the source parameters don't + * fully fit within a screen, the blit fails. They must originate + * from exactly one screen. Virtual coordinates are not directly + * supported. + * + * Host-to-guest blits do support the same set of GMRFB formats + * offered by guest-to-host blits. + * + * The SVGA device is guaranteed to finish writing to the GMRFB by + * the time any subsequent FENCE commands are reached. + * + * Availability: + * SVGA_FIFO_CAP_SCREEN_OBJECT + */ + +typedef +struct { + SVGASignedPoint destOrigin; + SVGASignedRect srcRect; + uint32 srcScreenId; +} SVGAFifoCmdBlitScreenToGMRFB; + + +/* + * SVGA_CMD_ANNOTATION_FILL -- + * + * This is a blit annotation. This command stores a small piece of + * device state which is consumed by the next blit-to-screen + * command. The state is only cleared by commands which are + * specifically documented as consuming an annotation. Other + * commands (such as ESCAPEs for debugging) may intervene between + * the annotation and its associated blit. + * + * This annotation is a promise about the contents of the next + * blit: The video driver is guaranteeing that all pixels in that + * blit will have the same value, specified here as a color in + * SVGAColorBGRX format. + * + * The SVGA device can still render the blit correctly even if it + * ignores this annotation, but the annotation may allow it to + * perform the blit more efficiently, for example by ignoring the + * source data and performing a fill in hardware. + * + * This annotation is most important for performance when the + * user's display is being remoted over a network connection. + * + * Availability: + * SVGA_FIFO_CAP_SCREEN_OBJECT + */ + +typedef +struct { + SVGAColorBGRX color; +} SVGAFifoCmdAnnotationFill; + + +/* + * SVGA_CMD_ANNOTATION_COPY -- + * + * This is a blit annotation. See SVGA_CMD_ANNOTATION_FILL for more + * information about annotations. + * + * This annotation is a promise about the contents of the next + * blit: The video driver is guaranteeing that all pixels in that + * blit will have the same value as those which already exist at an + * identically-sized region on the same or a different screen. + * + * Note that the source pixels for the COPY in this annotation are + * sampled before applying the anqnotation's associated blit. They + * are allowed to overlap with the blit's destination pixels. + * + * The copy source rectangle is specified the same way as the blit + * destination: it can be a rectangle which spans zero or more + * screens, specified relative to either a screen or to the virtual + * coordinate system's origin. If the source rectangle includes + * pixels which are not from exactly one screen, the results are + * undefined. + * + * Availability: + * SVGA_FIFO_CAP_SCREEN_OBJECT + */ + +typedef +struct { + SVGASignedPoint srcOrigin; + uint32 srcScreenId; +} SVGAFifoCmdAnnotationCopy; + +#endif diff --git a/drivers/gpu/drm/vmwgfx/svga_types.h b/drivers/gpu/drm/vmwgfx/svga_types.h new file mode 100644 index 000000000000..55836dedcfc2 --- /dev/null +++ b/drivers/gpu/drm/vmwgfx/svga_types.h @@ -0,0 +1,45 @@ +/************************************************************************** + * + * Copyright © 2009 VMware, Inc., Palo Alto, CA., USA + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + **************************************************************************/ + +/** + * Silly typedefs for the svga headers. Currently the headers are shared + * between all components that talk to svga. And as such the headers are + * are in a completely different style and use weird defines. + * + * This file lets all the ugly be prefixed with svga*. + */ + +#ifndef _SVGA_TYPES_H_ +#define _SVGA_TYPES_H_ + +typedef uint16_t uint16; +typedef uint32_t uint32; +typedef uint8_t uint8; +typedef int32_t int32; +typedef bool Bool; + +#endif