From: Brian Norris Date: Thu, 14 May 2015 17:32:53 +0000 (-0700) Subject: Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor" X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=8947e396a829;p=sagit-ice-cold%2Fkernel_xiaomi_msm8998.git Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor" In commit 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"), we added a generic "nor-jedec" binding to catch all mostly-compatible SPI NOR flash which can be detected via the READ ID opcode (0x9F). This was discussed and reviewed at the time, however objections have come up since then as part of this discussion: http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074 It seems the parties involved agree that "jedec,spi-nor" does a better job of capturing the fact that this is SPI-specific, not just any NOR flash. This binding was only merged for v4.1-rc1, so it's still OK to change the naming. At the same time, let's move the documentation to a better name. Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the documentation. Signed-off-by: Brian Norris Cc: Marek Vasut Cc: Rafał Miłecki Cc: Rob Herring Cc: Pawel Moll Cc: Ian Campbell Cc: Kumar Gala Cc: devicetree@vger.kernel.org Acked-by: Stephen Warren Acked-by: Geert Uytterhoeven Acked-by: Mark Rutland --- diff --git a/Documentation/devicetree/bindings/mtd/m25p80.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt similarity index 85% rename from Documentation/devicetree/bindings/mtd/m25p80.txt rename to Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt index f20b111b502a..2bee68103b01 100644 --- a/Documentation/devicetree/bindings/mtd/m25p80.txt +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt @@ -8,8 +8,8 @@ Required properties: is not Linux-only, but in case of Linux, see the "m25p_ids" table in drivers/mtd/devices/m25p80.c for the list of supported chips. - Must also include "nor-jedec" for any SPI NOR flash that can be - identified by the JEDEC READ ID opcode (0x9F). + Must also include "jedec,spi-nor" for any SPI NOR flash that can + be identified by the JEDEC READ ID opcode (0x9F). - reg : Chip-Select number - spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at @@ -25,7 +25,7 @@ Example: flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,m25p80", "nor-jedec"; + compatible = "spansion,m25p80", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; m25p,fast-read; diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 7c8b1694a134..3af137f49ac9 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -223,7 +223,7 @@ static int m25p_probe(struct spi_device *spi) */ if (data && data->type) flash_name = data->type; - else if (!strcmp(spi->modalias, "nor-jedec")) + else if (!strcmp(spi->modalias, "spi-nor")) flash_name = NULL; /* auto-detect */ else flash_name = spi->modalias; @@ -255,7 +255,7 @@ static int m25p_remove(struct spi_device *spi) * since most of these flash are compatible to some extent, and their * differences can often be differentiated by the JEDEC read-ID command, we * encourage new users to add support to the spi-nor library, and simply bind - * against a generic string here (e.g., "nor-jedec"). + * against a generic string here (e.g., "jedec,spi-nor"). * * Many flash names are kept here in this list (as well as in spi-nor.c) to * keep them available as module aliases for existing platforms. @@ -305,7 +305,7 @@ static const struct spi_device_id m25p_ids[] = { * Generic support for SPI NOR that can be identified by the JEDEC READ * ID opcode (0x9F). Use this, if possible. */ - {"nor-jedec"}, + {"spi-nor"}, { }, }; MODULE_DEVICE_TABLE(spi, m25p_ids);