From: Arnaud Vrac Date: Wed, 19 Apr 2023 14:41:10 +0000 (+0200) Subject: drm/msm/dpu: use hsync/vsync polarity set by the encoder X-Git-Tag: v6.5-rc1~28^2~6^2~57^3~65 X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=95a808328e9918e5716610313f6aec7600108ede;p=tomoyo%2Ftomoyo-test1.git drm/msm/dpu: use hsync/vsync polarity set by the encoder Do not override the hsync/vsync polarity passed by the encoder when setting up intf timings. The same logic was used in both the encoder and intf code to set the DP and DSI polarities, so those interfaces are not impacted. However for HDMI, the polarities were overriden to static values based on the vertical resolution, instead of using the actual mode polarities. Signed-off-by: Arnaud Vrac Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/532901/ Link: https://lore.kernel.org/r/20230419-dpu-tweaks-v1-3-d1bac46db075@freebox.fr Signed-off-by: Dmitry Baryshkov --- diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c index b9dddf576c02..c665d59f88f5 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c @@ -99,7 +99,7 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx, u32 active_h_start, active_h_end; u32 active_v_start, active_v_end; u32 active_hctl, display_hctl, hsync_ctl; - u32 polarity_ctl, den_polarity, hsync_polarity, vsync_polarity; + u32 polarity_ctl, den_polarity; u32 panel_format; u32 intf_cfg, intf_cfg2 = 0; u32 display_data_hctl = 0, active_data_hctl = 0; @@ -186,19 +186,9 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx, } den_polarity = 0; - if (ctx->cap->type == INTF_HDMI) { - hsync_polarity = p->yres >= 720 ? 0 : 1; - vsync_polarity = p->yres >= 720 ? 0 : 1; - } else if (ctx->cap->type == INTF_DP) { - hsync_polarity = p->hsync_polarity; - vsync_polarity = p->vsync_polarity; - } else { - hsync_polarity = 0; - vsync_polarity = 0; - } polarity_ctl = (den_polarity << 2) | /* DEN Polarity */ - (vsync_polarity << 1) | /* VSYNC Polarity */ - (hsync_polarity << 0); /* HSYNC Polarity */ + (p->vsync_polarity << 1) | /* VSYNC Polarity */ + (p->hsync_polarity << 0); /* HSYNC Polarity */ if (!DPU_FORMAT_IS_YUV(fmt)) panel_format = (fmt->bits[C0_G_Y] |