From: Vishal Kulkarni Date: Mon, 21 Jan 2019 11:42:11 +0000 (+0530) Subject: cxgb4/cxgb4vf: Link management changes X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=95eb7882dfdde9642362586a858734c233335a95;p=android-x86%2Fkernel.git cxgb4/cxgb4vf: Link management changes 1) Speed should be supported by Physical Port Capabilities. 2) report Forward Error Correction mode which are available. 3) Added few comments. Signed-off-by: Casey Leedom Signed-off-by: Vishal Kulkarni Signed-off-by: Arjun Vynipadath Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c index d07230c892a5..796043544fc3 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c @@ -446,8 +446,10 @@ static void fw_caps_to_lmm(enum fw_port_type port_type, unsigned long *link_mode_mask) { #define SET_LMM(__lmm_name) \ - __set_bit(ETHTOOL_LINK_MODE_ ## __lmm_name ## _BIT, \ - link_mode_mask) + do { \ + __set_bit(ETHTOOL_LINK_MODE_ ## __lmm_name ## _BIT, \ + link_mode_mask); \ + } while (0) #define FW_CAPS_TO_LMM(__fw_name, __lmm_name) \ do { \ @@ -541,7 +543,7 @@ static void fw_caps_to_lmm(enum fw_port_type port_type, case FW_PORT_TYPE_CR4_QSFP: SET_LMM(FIBRE); FW_CAPS_TO_LMM(SPEED_1G, 1000baseT_Full); - FW_CAPS_TO_LMM(SPEED_10G, 10000baseSR_Full); + FW_CAPS_TO_LMM(SPEED_10G, 10000baseKR_Full); FW_CAPS_TO_LMM(SPEED_40G, 40000baseSR4_Full); FW_CAPS_TO_LMM(SPEED_25G, 25000baseCR_Full); FW_CAPS_TO_LMM(SPEED_50G, 50000baseCR2_Full); @@ -552,6 +554,13 @@ static void fw_caps_to_lmm(enum fw_port_type port_type, break; } + if (fw_caps & FW_PORT_CAP32_FEC_V(FW_PORT_CAP32_FEC_M)) { + FW_CAPS_TO_LMM(FEC_RS, FEC_RS); + FW_CAPS_TO_LMM(FEC_BASER_RS, FEC_BASER); + } else { + SET_LMM(FEC_NONE); + } + FW_CAPS_TO_LMM(ANEG, Autoneg); FW_CAPS_TO_LMM(802_3_PAUSE, Pause); FW_CAPS_TO_LMM(802_3_ASM_DIR, Asym_Pause); @@ -679,18 +688,15 @@ static int set_link_ksettings(struct net_device *dev, base->autoneg == AUTONEG_DISABLE) { fw_caps = speed_to_fw_caps(base->speed); - /* Must only specify a single speed which must be supported - * as part of the Physical Port Capabilities. - */ - if ((fw_caps & (fw_caps - 1)) != 0 || - !(lc->pcaps & fw_caps)) + /* Speed must be supported by Physical Port Capabilities. */ + if (!(lc->pcaps & fw_caps)) return -EINVAL; lc->speed_caps = fw_caps; lc->acaps = fw_caps; } else { fw_caps = - lmm_to_fw_caps(link_ksettings->link_modes.advertising); + lmm_to_fw_caps(link_ksettings->link_modes.advertising); if (!(lc->pcaps & fw_caps)) return -EINVAL; lc->speed_caps = 0; diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 2b03f6187a24..c5e5466ee38b 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -4105,6 +4105,9 @@ static inline fw_port_cap32_t cc_to_fwcap_fec(enum cc_fec cc_fec) * @mbox: the Firmware Mailbox to use * @port: the Port ID * @lc: the Port's Link Configuration + * @sleep_ok: if true we may sleep while awaiting command completion + * @timeout: time to wait for command to finish before timing out + * (negative implies @sleep_ok=false) * * Set up a port's MAC and PHY according to a desired link configuration. * - If the PHY can auto-negotiate first decide what to advertise, then @@ -4124,6 +4127,7 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox, int ret; fw_mdi = (FW_PORT_CAP32_MDI_V(FW_PORT_CAP32_MDI_AUTO) & lc->pcaps); + /* Convert driver coding of Pause Frame Flow Control settings into the * Firmware's API. */ @@ -4143,8 +4147,13 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox, fw_fec = cc_to_fwcap_fec(cc_fec); /* Figure out what our Requested Port Capabilities are going to be. + * Note parallel structure in t4_handle_get_port_info() and + * init_link_config(). */ if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) { + if (lc->autoneg == AUTONEG_ENABLE) + return -EINVAL; + rcap = lc->acaps | fw_fc | fw_fec; lc->fc = lc->requested_fc & ~PAUSE_AUTONEG; lc->fec = cc_fec; @@ -4156,7 +4165,11 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox, rcap = lc->acaps | fw_fc | fw_fec | fw_mdi; } - /* Note that older Firmware doesn't have FW_PORT_CAP32_FORCE_PAUSE, so + /* Some Requested Port Capabilities are trivially wrong if they exceed + * the Physical Port Capabilities. We can check that here and provide + * moderately useful feedback in the system log. + * + * Note that older Firmware doesn't have FW_PORT_CAP32_FORCE_PAUSE, so * we need to exclude this from this check in order to maintain * compatibility ... */ @@ -4185,6 +4198,13 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox, ret = t4_wr_mbox_meat_timeout(adapter, mbox, &cmd, sizeof(cmd), NULL, sleep_ok, timeout); + + /* Unfortunately, even if the Requested Port Capabilities "fit" within + * the Physical Port Capabilities, some combinations of features may + * still not be leagal. For example, 40Gb/s and Reed-Solomon Forward + * Error Correction. So if the Firmware rejects the L1 Configure + * request, flag that here. + */ if (ret) { dev_err(adapter->pdev_dev, "Requested Port Capabilities %#x rejected, error %d\n", @@ -8461,6 +8481,10 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) fc = fwcap_to_cc_pause(linkattr); speed = fwcap_to_speed(linkattr); + /* Reset state for communicating new Transceiver Module status and + * whether the OS-dependent layer wants us to redo the current + * "sticky" L1 Configure Link Parameters. + */ lc->new_module = false; lc->redo_l1cfg = false; @@ -8497,9 +8521,15 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) */ pi->port_type = port_type; + /* Record new Module Type information. + */ pi->mod_type = mod_type; + /* Let the OS-dependent layer know if we have a new + * Transceiver Module inserted. + */ lc->new_module = t4_is_inserted_mod_type(mod_type); + t4_os_portmod_changed(adapter, pi->port_id); } @@ -8507,8 +8537,10 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) fc != lc->fc || fec != lc->fec) { /* something changed */ if (!link_ok && lc->link_ok) { lc->link_down_rc = linkdnrc; - dev_warn(adapter->pdev_dev, "Port %d link down, reason: %s\n", - pi->tx_chan, t4_link_down_rc_str(linkdnrc)); + dev_warn_ratelimited(adapter->pdev_dev, + "Port %d link down, reason: %s\n", + pi->tx_chan, + t4_link_down_rc_str(linkdnrc)); } lc->link_ok = link_ok; lc->speed = speed; @@ -8518,6 +8550,11 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) lc->lpacaps = lpacaps; lc->acaps = acaps & ADVERT_MASK; + /* If we're not physically capable of Auto-Negotiation, note + * this as Auto-Negotiation disabled. Otherwise, we track + * what Auto-Negotiation settings we have. Note parallel + * structure in t4_link_l1cfg_core() and init_link_config(). + */ if (!(lc->acaps & FW_PORT_CAP32_ANEG)) { lc->autoneg = AUTONEG_DISABLE; } else if (lc->acaps & FW_PORT_CAP32_ANEG) { @@ -8535,6 +8572,10 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) t4_os_link_changed(adapter, pi->port_id, link_ok); } + /* If we have a new Transceiver Module and the OS-dependent code has + * told us that it wants us to redo whatever "sticky" L1 Configuration + * Link Parameters are set, do that now. + */ if (lc->new_module && lc->redo_l1cfg) { struct link_config old_lc; int ret; diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c index 5b8c08cf523f..84dff74ca9cd 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c @@ -2005,8 +2005,10 @@ static void t4vf_handle_get_port_info(struct port_info *pi, fc != lc->fc || fec != lc->fec) { /* something changed */ if (!link_ok && lc->link_ok) { lc->link_down_rc = linkdnrc; - dev_warn(adapter->pdev_dev, "Port %d link down, reason: %s\n", - pi->port_id, t4vf_link_down_rc_str(linkdnrc)); + dev_warn_ratelimited(adapter->pdev_dev, + "Port %d link down, reason: %s\n", + pi->port_id, + t4vf_link_down_rc_str(linkdnrc)); } lc->link_ok = link_ok; lc->speed = speed;