From: Marcin Rajwa Date: Fri, 15 May 2020 13:59:53 +0000 (+0300) Subject: ASoC: SOF: inform DSP that driver is going to be removed X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=9f369f7e4660d05b5318aa413db199a70dfb2c4f;p=uclinux-h8%2Flinux.git ASoC: SOF: inform DSP that driver is going to be removed This patch invokes the DSP power down notifier to inform DSP that driver is going to be removed. The module removal entails DSP power down, disabling of IRQs and more. Therefore it is highly recommended to inform the DSP about this upcoming event. Due to hardware limitations on some Intel platforms it is necessary to power gate all LPSRAM banks that were enabled prior to controller reset. Otherwise, an attempt to write LPSRAM control registers may have no effect. Signed-off-by: Marcin Rajwa Signed-off-by: Kai Vehmanen Reviewed-by: Ranjani Sridharan Link: https://lore.kernel.org/r/20200515135958.17511-4-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown --- diff --git a/sound/soc/sof/core.c b/sound/soc/sof/core.c index ef9be4f45e27..339c4930b0c0 100644 --- a/sound/soc/sof/core.c +++ b/sound/soc/sof/core.c @@ -343,6 +343,12 @@ int snd_sof_device_remove(struct device *dev) { struct snd_sof_dev *sdev = dev_get_drvdata(dev); struct snd_sof_pdata *pdata = sdev->pdata; + int ret; + + ret = snd_sof_dsp_power_down_notify(sdev); + if (ret < 0) + dev_warn(dev, "error: %d failed to prepare DSP for device removal", + ret); if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE)) cancel_work_sync(&sdev->probe_work);