From: bwilson Date: Sat, 26 Mar 2005 00:20:59 +0000 (+0000) Subject: * config/tc-xtensa.c (use_longcalls): Delete. X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=a0cdb842c5b8cd37655dde98488f37b959552300;p=pf3gnuchains%2Fpf3gnuchains3x.git * config/tc-xtensa.c (use_longcalls): Delete. (xg_symbolic_immeds_fit): Check for direct calls and return TRUE if the use_longcalls flag is set. Do this before checking the segment. (xg_expand_assembly_insn): Rearrange to use new do_expand flag. Never expand direct calls at this point. (xtensa_set_frag_assembly_state): Set use_longcalls flag. (xtensa_find_unmarked_state_frags): Likewise. (md_assemble): Do not disable longcalls by setting is_specific_opcode. (xg_assemble_vliw_tokens): Switch frags when use_longcalls changes. (convert_frag_immed): Remove unnecessary check of is_specific_opcode. * config/tc-xtensa.h (xtensa_frag_type): Add use_longcalls flag. --- diff --git a/gas/ChangeLog b/gas/ChangeLog index cb2713a0dd..4ef1d056d2 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,17 @@ +2005-03-25 Bob Wilson + + * config/tc-xtensa.c (use_longcalls): Delete. + (xg_symbolic_immeds_fit): Check for direct calls and return TRUE if + the use_longcalls flag is set. Do this before checking the segment. + (xg_expand_assembly_insn): Rearrange to use new do_expand flag. Never + expand direct calls at this point. + (xtensa_set_frag_assembly_state): Set use_longcalls flag. + (xtensa_find_unmarked_state_frags): Likewise. + (md_assemble): Do not disable longcalls by setting is_specific_opcode. + (xg_assemble_vliw_tokens): Switch frags when use_longcalls changes. + (convert_frag_immed): Remove unnecessary check of is_specific_opcode. + * config/tc-xtensa.h (xtensa_frag_type): Add use_longcalls flag. + 2005-03-25 Hans-Peter Nilsson * config/tc-mmix.c, config/tc-mmix.h: Convert to ISO C90. diff --git a/gas/config/tc-xtensa.c b/gas/config/tc-xtensa.c index 81e9886d80..0bebbd0084 100644 --- a/gas/config/tc-xtensa.c +++ b/gas/config/tc-xtensa.c @@ -1031,16 +1031,6 @@ use_transform (void) static bfd_boolean -use_longcalls (void) -{ - /* After md_end, you should be checking frag by frag, rather - than state directives. */ - assert (!past_xtensa_end); - return directive_state[directive_longcalls] && use_transform (); -} - - -static bfd_boolean do_align_targets (void) { /* After md_end, you should be checking frag by frag, rather @@ -3312,22 +3302,28 @@ xg_symbolic_immeds_fit (const TInsn *insn, break; case O_symbol: - /* We only allow symbols for pc-relative stuff. + /* We only allow symbols for PC-relative references. If pc_frag == 0, then we don't have frag locations yet. */ - if (pc_frag == 0) + if (pc_frag == 0 + || xtensa_operand_is_PCrelative (isa, insn->opcode, i) == 0) return FALSE; - /* If it is PC-relative and the symbol is not in the same - segment as the PC.... */ - if (xtensa_operand_is_PCrelative (isa, insn->opcode, i) == 0 - || S_GET_SEGMENT (expr->X_add_symbol) != pc_seg) + /* If it is a weak symbol, then assume it won't reach. */ + if (S_IS_WEAK (expr->X_add_symbol)) return FALSE; - /* If it is a weak symbol, then assume it won't reach. This will - only affect calls when longcalls are enabled, because if - longcalls are disabled, then the call is marked as a specific - opcode. */ - if (S_IS_WEAK (expr->X_add_symbol)) + if (is_direct_call_opcode (insn->opcode) + && ! pc_frag->tc_frag_data.use_longcalls) + { + /* If callee is undefined or in a different segment, be + optimistic and assume it will be in range. */ + if (S_GET_SEGMENT (expr->X_add_symbol) != pc_seg) + return TRUE; + } + + /* Only references within a segment can be known to fit in the + operands at assembly time. */ + if (S_GET_SEGMENT (expr->X_add_symbol) != pc_seg) return FALSE; symbolP = expr->X_add_symbol; @@ -3645,7 +3641,7 @@ xg_assembly_relax (IStack *istack, } current_insn = *insn; - /* Walk through all of the single instruction expansions. */ + /* Walk through all of the single instruction expansions. */ while (xg_is_single_relaxable_insn (¤t_insn)) { int error_val = xg_expand_narrow (&single_target, ¤t_insn); @@ -3943,15 +3939,16 @@ xg_simplify_insn (TInsn *old_insn, TInsn *new_insn) /* xg_expand_assembly_insn: (1) Simplify the instruction, i.e., l32i -> l32i.n. (2) Check the number of operands. (3) Place the instruction - tokens into the stack or if we can relax it at assembly time, place - multiple instructions/literals onto the stack. Return FALSE if no - error. */ + tokens into the stack or relax it and place multiple + instructions/literals onto the stack. Return FALSE if no error. */ static bfd_boolean xg_expand_assembly_insn (IStack *istack, TInsn *orig_insn) { int noperands; TInsn new_insn; + bfd_boolean do_expand; + memset (&new_insn, 0, sizeof (TInsn)); /* Narrow it if we can. xg_simplify_insn now does all the @@ -3977,50 +3974,37 @@ xg_expand_assembly_insn (IStack *istack, TInsn *orig_insn) /* If there are not enough operands, we will assert above. If there are too many, just cut out the extras here. */ - orig_insn->ntok = noperands; - /* Cases: - - Instructions with all constant immeds: - Assemble them and relax the instruction if possible. - Give error if not possible; no fixup needed. - - Instructions with symbolic immeds: - Assemble them with a Fix up (that may cause instruction expansion). - Also close out the fragment if the fixup may cause instruction expansion. - - There are some other special cases where we need alignment. - 1) before certain instructions with required alignment (OPCODE_ALIGN) - 2) before labels that have jumps (LABEL_ALIGN) - 3) after call instructions (RETURN_ALIGN) - Multiple of these may be possible on the same fragment. - If so, make sure to satisfy the required alignment. - Then try to get the desired alignment. */ - if (tinsn_has_invalid_symbolic_operands (orig_insn)) return TRUE; - if (orig_insn->is_specific_opcode || !use_transform ()) - { - istack_push (istack, orig_insn); - return FALSE; - } + /* If the instruction will definitely need to be relaxed, it is better + to expand it now for better scheduling. Decide whether to expand + now.... */ + do_expand = (!orig_insn->is_specific_opcode && use_transform ()); + + /* Calls should be expanded to longcalls only in the backend relaxation + so that the assembly scheduler will keep the L32R/CALLX instructions + adjacent. */ + if (is_direct_call_opcode (orig_insn->opcode)) + do_expand = FALSE; if (tinsn_has_symbolic_operands (orig_insn)) { - if (tinsn_has_complex_operands (orig_insn)) - xg_assembly_relax (istack, orig_insn, 0, 0, 0, 0, 0); - else - istack_push (istack, orig_insn); + /* The values of symbolic operands are not known yet, so only expand + now if an operand is "complex" (e.g., difference of symbols) and + will have to be stored as a literal regardless of the value. */ + if (!tinsn_has_complex_operands (orig_insn)) + do_expand = FALSE; } + else if (xg_immeds_fit (orig_insn)) + do_expand = FALSE; + + if (do_expand) + xg_assembly_relax (istack, orig_insn, 0, 0, 0, 0, 0); else - { - if (xg_immeds_fit (orig_insn)) - istack_push (istack, orig_insn); - else - xg_assembly_relax (istack, orig_insn, 0, 0, 0, 0, 0); - } + istack_push (istack, orig_insn); return FALSE; } @@ -4789,6 +4773,8 @@ xtensa_set_frag_assembly_state (fragS *fragP) "use_schedule" here. */ if (!directive_state[directive_transform]) fragP->tc_frag_data.is_no_transform = TRUE; + if (directive_state[directive_longcalls]) + fragP->tc_frag_data.use_longcalls = TRUE; fragP->tc_frag_data.use_absolute_literals = directive_state[directive_absolute_literals]; fragP->tc_frag_data.is_assembly_state_set = TRUE; @@ -4847,6 +4833,8 @@ xtensa_find_unmarked_state_frags (void) last_fragP->tc_frag_data.is_no_density; fragP->tc_frag_data.is_no_transform = last_fragP->tc_frag_data.is_no_transform; + fragP->tc_frag_data.use_longcalls = + last_fragP->tc_frag_data.use_longcalls; fragP->tc_frag_data.use_absolute_literals = last_fragP->tc_frag_data.use_absolute_literals; } @@ -5300,11 +5288,6 @@ md_assemble (char *str) return; } - /* Special case: The call instructions should be marked "specific opcode" - to keep them from expanding. */ - if (!use_longcalls () && is_direct_call_opcode (orig_insn.opcode)) - orig_insn.is_specific_opcode = TRUE; - /* Parse the arguments. */ if (parse_arguments (&orig_insn, num_args, arg_strings)) { @@ -6760,6 +6743,8 @@ xg_assemble_vliw_tokens (vliw_insn *vinsn) && (! frag_now->tc_frag_data.is_insn || (vinsn_has_specific_opcodes (vinsn) && use_transform ()) || !use_transform () != frag_now->tc_frag_data.is_no_transform + || (directive_state[directive_longcalls] + != frag_now->tc_frag_data.use_longcalls) || (directive_state[directive_absolute_literals] != frag_now->tc_frag_data.use_absolute_literals))) { @@ -6877,9 +6862,9 @@ xg_assemble_vliw_tokens (vliw_insn *vinsn) { TInsn *tinsn = &vinsn->slots[slot]; frag_now->tc_frag_data.slot_subtypes[slot] = tinsn->subtype; - frag_now->tc_frag_data.slot_symbols[slot] = tinsn->symbol; - frag_now->tc_frag_data.slot_sub_symbols[slot] = tinsn->sub_symbol; - frag_now->tc_frag_data.slot_offsets[slot] = tinsn->offset; + frag_now->tc_frag_data.slot_symbols[slot] = tinsn->symbol; + frag_now->tc_frag_data.slot_sub_symbols[slot] = tinsn->sub_symbol; + frag_now->tc_frag_data.slot_offsets[slot] = tinsn->offset; frag_now->tc_frag_data.literal_frags[slot] = tinsn->literal_frag; if (tinsn->literal_space != 0) xg_assemble_literal_space (tinsn->literal_space, slot); @@ -9371,7 +9356,7 @@ convert_frag_immed (segT segP, xtensa_insnbuf_to_chars (isa, orig_vinsn.insnbuf, fr_opcode, 0); fragP->fr_var = 0; } - else if (!orig_tinsn.is_specific_opcode) + else { /* Here is the fun stuff: Get the immediate field from this instruction. If it fits, we're done. If not, find the next diff --git a/gas/config/tc-xtensa.h b/gas/config/tc-xtensa.h index e38fa6ce7d..99032fd6c5 100644 --- a/gas/config/tc-xtensa.h +++ b/gas/config/tc-xtensa.h @@ -195,6 +195,7 @@ struct xtensa_frag_type unsigned int is_assembly_state_set : 1; unsigned int is_no_density : 1; unsigned int is_no_transform : 1; + unsigned int use_longcalls : 1; unsigned int use_absolute_literals : 1; /* Inhibits relaxation of machine-dependent alignment frags the