From: Angel Iglesias Date: Mon, 12 Sep 2022 23:47:31 +0000 (+0200) Subject: iio: pressure: bmp280: simplify driver initialization logic X-Git-Tag: v6.1-rc1~113^2~25^2~45 X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=b00e805a47a86fb5890a1c2451e4d89043b1761d;p=tomoyo%2Ftomoyo-test1.git iio: pressure: bmp280: simplify driver initialization logic Simplified common initialization logic of different sensor types unifying calibration and initial configuration recovery. Default config param values of each sensor type are stored inside chip_info structure and used to initialize sensor data struct instance. The helper functions for read each sensor type calibration are converted to a callback available on the chip_info struct. Separated bme280 specific calibration code from bmp280 function. Dropped the additional chip_id argument in bmp280 code as is not longer required. Now both bmp280/bme280 calibration function use same signature as bmp180. Suggested-by: Jonathan Cameron Signed-off-by: Angel Iglesias Link: https://lore.kernel.org/r/584c90f309e4f24bf2e4aa2b15c8577d288f978d.1663025017.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index c86dae3c5cec..067e56ba6c84 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -115,19 +115,28 @@ struct bmp280_data { }; struct bmp280_chip_info { + unsigned int id_reg; + + int num_channels; + unsigned int start_up_time; + const int *oversampling_temp_avail; int num_oversampling_temp_avail; + int oversampling_temp_default; const int *oversampling_press_avail; int num_oversampling_press_avail; + int oversampling_press_default; const int *oversampling_humid_avail; int num_oversampling_humid_avail; + int oversampling_humid_default; int (*chip_config)(struct bmp280_data *); int (*read_temp)(struct bmp280_data *, int *); int (*read_press)(struct bmp280_data *, int *, int *); int (*read_humid)(struct bmp280_data *, int *, int *); + int (*read_calib)(struct bmp280_data *); }; /* @@ -154,15 +163,10 @@ static const struct iio_chan_spec bmp280_channels[] = { }, }; -static int bmp280_read_calib(struct bmp280_data *data, - struct bmp280_calib *calib, - unsigned int chip) +static int bmp280_read_calib(struct bmp280_data *data) { + struct bmp280_calib *calib = &data->calib.bmp280; __le16 c_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2]; - struct device *dev = data->dev; - unsigned int tmp; - __le16 l16; - __be16 b16; int ret; @@ -194,6 +198,25 @@ static int bmp280_read_calib(struct bmp280_data *data, calib->P8 = le16_to_cpu(c_buf[P8]); calib->P9 = le16_to_cpu(c_buf[P9]); + return 0; +} + +static int bme280_read_calib(struct bmp280_data *data) +{ + struct bmp280_calib *calib = &data->calib.bmp280; + struct device *dev = data->dev; + unsigned int tmp; + __le16 l16; + __be16 b16; + int ret; + + /* Load shared calibration params with bmp280 first */ + ret = bmp280_read_calib(data); + if (ret < 0) { + dev_err(dev, "failed to read common bmp280 calibration parameters\n"); + return ret; + } + /* * Read humidity calibration values. * Due to some odd register addressing we cannot just @@ -201,8 +224,6 @@ static int bmp280_read_calib(struct bmp280_data *data, * value separately and sometimes do some bit shifting... * Humidity data is only available on BME280. */ - if (chip != BME280_CHIP_ID) - return 0; ret = regmap_read(data->regmap, BMP280_REG_COMP_H1, &tmp); if (ret < 0) { @@ -637,15 +658,32 @@ static int bmp280_chip_config(struct bmp280_data *data) static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 }; static const struct bmp280_chip_info bmp280_chip_info = { + .id_reg = BMP280_REG_ID, + .start_up_time = 2000, + .num_channels = 2, + .oversampling_temp_avail = bmp280_oversampling_avail, .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail), + /* + * Oversampling config values on BMx280 have one additional setting + * that other generations of the family don't: + * The value 0 means the measurement is bypassed instead of + * oversampling set to x1. + * + * To account for this difference, and preserve the same common + * config logic, this is handled later on chip_config callback + * incrementing one unit the oversampling setting. + */ + .oversampling_temp_default = BMP280_OSRS_TEMP_2X - 1, .oversampling_press_avail = bmp280_oversampling_avail, .num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail), + .oversampling_press_default = BMP280_OSRS_PRESS_16X - 1, .chip_config = bmp280_chip_config, .read_temp = bmp280_read_temp, .read_press = bmp280_read_press, + .read_calib = bmp280_read_calib, }; static int bme280_chip_config(struct bmp280_data *data) @@ -667,19 +705,27 @@ static int bme280_chip_config(struct bmp280_data *data) } static const struct bmp280_chip_info bme280_chip_info = { + .id_reg = BMP280_REG_ID, + .start_up_time = 2000, + .num_channels = 3, + .oversampling_temp_avail = bmp280_oversampling_avail, .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail), + .oversampling_temp_default = BMP280_OSRS_TEMP_2X - 1, .oversampling_press_avail = bmp280_oversampling_avail, .num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail), + .oversampling_press_default = BMP280_OSRS_PRESS_16X - 1, .oversampling_humid_avail = bmp280_oversampling_avail, .num_oversampling_humid_avail = ARRAY_SIZE(bmp280_oversampling_avail), + .oversampling_humid_default = BMP280_OSRS_HUMIDITY_16X - 1, .chip_config = bme280_chip_config, .read_temp = bmp280_read_temp, .read_press = bmp280_read_press, .read_humid = bmp280_read_humid, + .read_calib = bme280_read_calib, }; static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) @@ -747,9 +793,9 @@ static int bmp180_read_adc_temp(struct bmp280_data *data, int *val) return 0; } -static int bmp180_read_calib(struct bmp280_data *data, - struct bmp180_calib *calib) +static int bmp180_read_calib(struct bmp280_data *data) { + struct bmp180_calib *calib = &data->calib.bmp180; __be16 buf[BMP180_REG_CALIB_COUNT / 2]; int ret; int i; @@ -915,17 +961,24 @@ static const int bmp180_oversampling_temp_avail[] = { 1 }; static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 }; static const struct bmp280_chip_info bmp180_chip_info = { + .id_reg = BMP280_REG_ID, + .start_up_time = 2000, + .num_channels = 2, + .oversampling_temp_avail = bmp180_oversampling_temp_avail, .num_oversampling_temp_avail = ARRAY_SIZE(bmp180_oversampling_temp_avail), + .oversampling_temp_default = 0, .oversampling_press_avail = bmp180_oversampling_press_avail, .num_oversampling_press_avail = ARRAY_SIZE(bmp180_oversampling_press_avail), + .oversampling_press_default = BMP180_MEAS_PRESS_8X, .chip_config = bmp180_chip_config, .read_temp = bmp180_read_temp, .read_press = bmp180_read_press, + .read_calib = bmp180_read_calib, }; static irqreturn_t bmp085_eoc_irq(int irq, void *d) @@ -992,6 +1045,7 @@ int bmp280_common_probe(struct device *dev, const char *name, int irq) { + const struct bmp280_chip_info *chip_info; struct iio_dev *indio_dev; struct bmp280_data *data; struct gpio_desc *gpiod; @@ -1013,30 +1067,25 @@ int bmp280_common_probe(struct device *dev, switch (chip) { case BMP180_CHIP_ID: - indio_dev->num_channels = 2; - data->chip_info = &bmp180_chip_info; - data->oversampling_press = ilog2(8); - data->oversampling_temp = ilog2(1); - data->start_up_time = 10000; + chip_info = &bmp180_chip_info; break; case BMP280_CHIP_ID: - indio_dev->num_channels = 2; - data->chip_info = &bmp280_chip_info; - data->oversampling_press = ilog2(16); - data->oversampling_temp = ilog2(2); - data->start_up_time = 2000; + chip_info = &bmp280_chip_info; break; case BME280_CHIP_ID: - indio_dev->num_channels = 3; - data->chip_info = &bme280_chip_info; - data->oversampling_press = ilog2(16); - data->oversampling_humid = ilog2(16); - data->oversampling_temp = ilog2(2); - data->start_up_time = 2000; + chip_info = &bme280_chip_info; break; default: return -EINVAL; } + data->chip_info = chip_info; + + /* Apply initial values from chip info structure */ + indio_dev->num_channels = chip_info->num_channels; + data->oversampling_press = chip_info->oversampling_press_default; + data->oversampling_humid = chip_info->oversampling_humid_default; + data->oversampling_temp = chip_info->oversampling_temp_default; + data->start_up_time = chip_info->start_up_time; /* Bring up regulators */ regulator_bulk_set_supply_names(data->supplies, @@ -1073,7 +1122,8 @@ int bmp280_common_probe(struct device *dev, } data->regmap = regmap; - ret = regmap_read(regmap, BMP280_REG_ID, &chip_id); + + ret = regmap_read(regmap, data->chip_info->id_reg, &chip_id); if (ret < 0) return ret; if (chip_id != chip) { @@ -1093,21 +1143,11 @@ int bmp280_common_probe(struct device *dev, * non-volatile memory during production". Let's read them out at probe * time once. They will not change. */ - if (chip_id == BMP180_CHIP_ID) { - ret = bmp180_read_calib(data, &data->calib.bmp180); - if (ret < 0) { - dev_err(data->dev, - "failed to read calibration coefficients\n"); - return ret; - } - } else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) { - ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id); - if (ret < 0) { - dev_err(data->dev, - "failed to read calibration coefficients\n"); - return ret; - } - } + + ret = data->chip_info->read_calib(data); + if (ret < 0) + return dev_err_probe(data->dev, ret, + "failed to read calibration coefficients\n"); /* * Attempt to grab an optional EOC IRQ - only the BMP085 has this