From: Ettore Chimenti Date: Sun, 21 Oct 2018 16:58:20 +0000 (-0400) Subject: media: seco-cec: add Consumer-IR support X-Git-Tag: for-4.21~64^2~246 X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=daef95769b3a1d60afc31fa97578824a2ff39915;p=uclinux-h8%2Flinux.git media: seco-cec: add Consumer-IR support Introduce support for Consumer-IR into seco-cec driver, as it shares the same interrupt for receiving messages. The device decodes RC5 signals only, defaults to hauppauge mapping. It will spawn an input interface using the RC framework (like CEC device). Signed-off-by: Ettore Chimenti Reviewed-by: Sean Young Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 8c31a7728985..2667df2b486e 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -637,6 +637,16 @@ config VIDEO_SECO_CEC CEC bus is present in the HDMI connector and enables communication between compatible devices. +config VIDEO_SECO_RC + bool "SECO Boards IR RC5 support" + depends on VIDEO_SECO_CEC + select RC_CORE + help + If you say yes here you will get support for the + SECO Boards Consumer-IR in seco-cec driver. + The embedded controller supports RC5 protocol only, default mapping + is set to rc-hauppauge. + endif #CEC_PLATFORM_DRIVERS menuconfig SDR_PLATFORM_DRIVERS diff --git a/drivers/media/platform/seco-cec/seco-cec.c b/drivers/media/platform/seco-cec/seco-cec.c index 85ef161742d8..8308873c53ab 100644 --- a/drivers/media/platform/seco-cec/seco-cec.c +++ b/drivers/media/platform/seco-cec/seco-cec.c @@ -26,6 +26,8 @@ struct secocec_data { struct platform_device *pdev; struct cec_adapter *cec_adap; struct cec_notifier *notifier; + struct rc_dev *ir; + char ir_input_phys[32]; int irq; }; @@ -340,6 +342,114 @@ struct cec_adap_ops secocec_cec_adap_ops = { .adap_transmit = secocec_adap_transmit, }; +#ifdef CONFIG_VIDEO_SECO_RC +static int secocec_ir_probe(void *priv) +{ + struct secocec_data *cec = priv; + struct device *dev = cec->dev; + int status; + u16 val; + + /* Prepare the RC input device */ + cec->ir = devm_rc_allocate_device(dev, RC_DRIVER_SCANCODE); + if (!cec->ir) + return -ENOMEM; + + snprintf(cec->ir_input_phys, sizeof(cec->ir_input_phys), + "%s/input0", dev_name(dev)); + + cec->ir->device_name = dev_name(dev); + cec->ir->input_phys = cec->ir_input_phys; + cec->ir->input_id.bustype = BUS_HOST; + cec->ir->input_id.vendor = 0; + cec->ir->input_id.product = 0; + cec->ir->input_id.version = 1; + cec->ir->driver_name = SECOCEC_DEV_NAME; + cec->ir->allowed_protocols = RC_PROTO_BIT_RC5; + cec->ir->priv = cec; + cec->ir->map_name = RC_MAP_HAUPPAUGE; + cec->ir->timeout = MS_TO_NS(100); + + /* Clear the status register */ + status = smb_rd16(SECOCEC_STATUS_REG_1, &val); + if (status != 0) + goto err; + + status = smb_wr16(SECOCEC_STATUS_REG_1, val); + if (status != 0) + goto err; + + /* Enable the interrupts */ + status = smb_rd16(SECOCEC_ENABLE_REG_1, &val); + if (status != 0) + goto err; + + status = smb_wr16(SECOCEC_ENABLE_REG_1, + val | SECOCEC_ENABLE_REG_1_IR); + if (status != 0) + goto err; + + dev_dbg(dev, "IR enabled"); + + status = devm_rc_register_device(dev, cec->ir); + + if (status) { + dev_err(dev, "Failed to prepare input device"); + cec->ir = NULL; + goto err; + } + + return 0; + +err: + smb_rd16(SECOCEC_ENABLE_REG_1, &val); + + smb_wr16(SECOCEC_ENABLE_REG_1, + val & ~SECOCEC_ENABLE_REG_1_IR); + + dev_dbg(dev, "IR disabled"); + return status; +} + +static int secocec_ir_rx(struct secocec_data *priv) +{ + struct secocec_data *cec = priv; + struct device *dev = cec->dev; + u16 val, status, key, addr, toggle; + + if (!cec->ir) + return -ENODEV; + + status = smb_rd16(SECOCEC_IR_READ_DATA, &val); + if (status != 0) + goto err; + + key = val & SECOCEC_IR_COMMAND_MASK; + addr = (val & SECOCEC_IR_ADDRESS_MASK) >> SECOCEC_IR_ADDRESS_SHL; + toggle = (val & SECOCEC_IR_TOGGLE_MASK) >> SECOCEC_IR_TOGGLE_SHL; + + rc_keydown(cec->ir, RC_PROTO_RC5, RC_SCANCODE_RC5(addr, key), toggle); + + dev_dbg(dev, "IR key pressed: 0x%02x addr 0x%02x toggle 0x%02x", key, + addr, toggle); + + return 0; + +err: + dev_err(dev, "IR Receive message failed (%d)", status); + return -EIO; +} +#else +static void secocec_ir_rx(struct secocec_data *priv) +{ +} + +static int secocec_ir_probe(void *priv) +{ + return 0; +} +#endif + static irqreturn_t secocec_irq_handler(int irq, void *priv) { struct secocec_data *cec = priv; @@ -374,7 +484,8 @@ static irqreturn_t secocec_irq_handler(int irq, void *priv) if (status_val & SECOCEC_STATUS_REG_1_IR) { val |= SECOCEC_STATUS_REG_1_IR; - /* TODO IRDA RX */ + + secocec_ir_rx(cec); } /* Reset status register */ @@ -542,6 +653,10 @@ static int secocec_probe(struct platform_device *pdev) if (secocec->notifier) cec_register_cec_notifier(secocec->cec_adap, secocec->notifier); + ret = secocec_ir_probe(secocec); + if (ret) + goto err_delete_adapter; + platform_set_drvdata(pdev, secocec); dev_dbg(dev, "Device registered"); @@ -559,7 +674,15 @@ err: static int secocec_remove(struct platform_device *pdev) { struct secocec_data *secocec = platform_get_drvdata(pdev); + u16 val; + + if (secocec->ir) { + smb_rd16(SECOCEC_ENABLE_REG_1, &val); + smb_wr16(SECOCEC_ENABLE_REG_1, val & ~SECOCEC_ENABLE_REG_1_IR); + + dev_dbg(&pdev->dev, "IR disabled"); + } cec_unregister_adapter(secocec->cec_adap); if (secocec->notifier) diff --git a/drivers/media/platform/seco-cec/seco-cec.h b/drivers/media/platform/seco-cec/seco-cec.h index be5a657ae462..e632c4a2a044 100644 --- a/drivers/media/platform/seco-cec/seco-cec.h +++ b/drivers/media/platform/seco-cec/seco-cec.h @@ -100,6 +100,17 @@ #define SECOCEC_IR_READ_DATA 0x3e /* + * IR + */ + +#define SECOCEC_IR_COMMAND_MASK 0x007F +#define SECOCEC_IR_COMMAND_SHL 0 +#define SECOCEC_IR_ADDRESS_MASK 0x1F00 +#define SECOCEC_IR_ADDRESS_SHL 7 +#define SECOCEC_IR_TOGGLE_MASK 0x8000 +#define SECOCEC_IR_TOGGLE_SHL 15 + +/* * Enabling register */