From: corinna Date: Wed, 30 Aug 2006 13:05:46 +0000 (+0000) Subject: * Makefile.in: Make installation of CYGWIN_LICENSE configurable. X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=f448d87cd988117013c3e06fbe3ff62febf567b2;p=pf3gnuchains%2Fpf3gnuchains3x.git * Makefile.in: Make installation of CYGWIN_LICENSE configurable. * aclocal.m4: Regenerate. * configure.in: Add GCC_NO_EXECUTABLES call. Add configuration for INSTALL_LICENSE. Make cygwin subdirectory optional. Add sanity check for cygwin resp. mingw subdirectories dependent of the target. * configure: Regenerate. --- diff --git a/winsup/ChangeLog b/winsup/ChangeLog index 414ebaf5bb..b40115d07d 100644 --- a/winsup/ChangeLog +++ b/winsup/ChangeLog @@ -1,3 +1,12 @@ +2006-08-30 Corinna Vinschen + + * Makefile.in: Make installation of CYGWIN_LICENSE configurable. + * aclocal.m4: Regenerate. + * configure.in: Add GCC_NO_EXECUTABLES call. Add configuration for + INSTALL_LICENSE. Make cygwin subdirectory optional. Add sanity + check for cygwin resp. mingw subdirectories dependent of the target. + * configure: Regenerate. + 2006-08-02 Christopher Faylor * Makefile.in (subauth): Add dependency on mingw. diff --git a/winsup/Makefile.in b/winsup/Makefile.in index e2f0a0a7f5..5aae11601b 100644 --- a/winsup/Makefile.in +++ b/winsup/Makefile.in @@ -46,6 +46,8 @@ INSTALL_SUBDIRS=${patsubst %,install_%,$(SUBDIRS)} CLEAN_SUBDIRS=${patsubst %,clean_%,$(SUBDIRS)} ZLIB=${findstring zlib,$(SUBDIRS)} +INSTALL_LICENSE:=@INSTALL_LICENSE@ + .PHONY: all install clean all-info info install-info check \ $(SUBDIRS) $(INSTALL_SUBDIRS) $(CLEAN_SUBDIRS) @@ -61,9 +63,11 @@ endif all: Makefile $(SUBDIRS) -install: Makefile CYGWIN_LICENSE $(INSTALL_SUBDIRS) +install-license: CYGWIN_LICENSE $(INSTALL_DATA) $(srcdir)/CYGWIN_LICENSE $(prefix)/share/doc/Cygwin/CYGWIN_LICENSE +install: Makefile $(INSTALL_LICENSE) $(INSTALL_SUBDIRS) + clean: $(CLEAN_SUBDIRS) all-info: diff --git a/winsup/aclocal.m4 b/winsup/aclocal.m4 index 1b65c070fb..86121a0f07 100644 --- a/winsup/aclocal.m4 +++ b/winsup/aclocal.m4 @@ -1,875 +1,76 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4-p6 - -dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl This program is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -dnl PARTICULAR PURPOSE. - -dnl This provides configure definitions used by all the winsup -dnl configure.in files. - -# FIXME: We temporarily define our own version of AC_PROG_CC. This is -# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We -# are probably using a cross compiler, which will not be able to fully -# link an executable. This should really be fixed in autoconf -# itself. - -AC_DEFUN([LIB_AC_PROG_CC_GNU], -[AC_CACHE_CHECK(whether we are using GNU C, ac_cv_prog_gcc, -[dnl The semicolon is to pacify NeXT's syntax-checking cpp. -cat > conftest.c </dev/null 2>&1; then - ac_cv_prog_gcc=yes +# generated automatically by aclocal 1.9.6 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# GCC_NO_EXECUTABLES +# ----------------- +# FIXME: The GCC team has specific needs which the current Autoconf +# framework cannot solve elegantly. This macro implements a dirty +# hack until Autoconf is able to provide the services its users +# need. +# +# Several of the support libraries that are often built with GCC can't +# assume the tool-chain is already capable of linking a program: the +# compiler often expects to be able to link with some of such +# libraries. +# +# In several of these libraries, workarounds have been introduced to +# avoid the AC_PROG_CC_WORKS test, that would just abort their +# configuration. The introduction of AC_EXEEXT, enabled either by +# libtool or by CVS autoconf, have just made matters worse. +# +# Unlike the previous AC_NO_EXECUTABLES, this test does not +# disable link tests at autoconf time, but at configure time. +# This allows AC_NO_EXECUTABLES to be invoked conditionally. +AC_DEFUN_ONCE([GCC_NO_EXECUTABLES], +[m4_divert_push([KILL]) + +AC_BEFORE([$0], [_AC_COMPILER_EXEEXT]) +AC_BEFORE([$0], [AC_LINK_IFELSE]) + +m4_define([_AC_COMPILER_EXEEXT], +AC_LANG_CONFTEST([AC_LANG_PROGRAM()]) +# FIXME: Cleanup? +AS_IF([AC_TRY_EVAL(ac_link)], [gcc_no_link=no], [gcc_no_link=yes]) +if test x$gcc_no_link = xyes; then + # Setting cross_compile will disable run tests; it will + # also disable AC_CHECK_FILE but that's generally + # correct if we can't link. + cross_compiling=yes + EXEEXT= else - ac_cv_prog_gcc=no -fi])]) - -AC_DEFUN([LIB_AC_PROG_CC], -[AC_BEFORE([$0], [AC_PROG_CPP])dnl -AC_CHECK_TOOL(CC, gcc, gcc) -: ${CC:=gcc} -AC_PROG_CC -test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) -]) - -AC_DEFUN([LIB_AC_PROG_CXX], -[AC_BEFORE([$0], [AC_PROG_CPP])dnl -AC_CHECK_TOOL(CXX, g++, g++) -if test -z "$CXX"; then - AC_CHECK_TOOL(CXX, g++, c++, , , ) - : ${CXX:=g++} - AC_PROG_CXX - test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) + m4_defn([_AC_COMPILER_EXEEXT])dnl fi +) -CXXFLAGS='$(CFLAGS)' -]) - -# lib-prefix.m4 serial 4 (gettext-0.14.2) -dnl Copyright (C) 2001-2005 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and -dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't -dnl require excessive bracketing. -ifdef([AC_HELP_STRING], -[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], -[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) - -dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed -dnl to access previously installed libraries. The basic assumption is that -dnl a user will want packages to use other packages he previously installed -dnl with the same --prefix option. -dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate -dnl libraries, but is otherwise very convenient. -AC_DEFUN([AC_LIB_PREFIX], -[ - AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_CANONICAL_HOST]) - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_LIB_ARG_WITH([lib-prefix], -[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib - --without-lib-prefix don't search for libraries in includedir and libdir], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/lib" - fi - fi -]) - if test $use_additional = yes; then - dnl Potentially add $additional_includedir to $CPPFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's already present in $CPPFLAGS, - dnl 3. if it's /usr/local/include and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - for x in $CPPFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $CPPFLAGS. - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" - fi - fi - fi - fi - dnl Potentially add $additional_libdir to $LDFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's already present in $LDFLAGS, - dnl 3. if it's /usr/local/lib and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/lib"; then - haveit= - for x in $LDFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_libdir" = "X/usr/local/lib"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LDFLAGS. - LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" - fi - fi - fi - fi - fi -]) - -dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, -dnl acl_final_exec_prefix, containing the values to which $prefix and -dnl $exec_prefix will expand at the end of the configure script. -AC_DEFUN([AC_LIB_PREPARE_PREFIX], -[ - dnl Unfortunately, prefix and exec_prefix get only finally determined - dnl at the end of configure. - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the -dnl variables prefix and exec_prefix bound to the values they will have -dnl at the end of the configure script. -AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], -[ - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - $1 - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" -]) - -# lib-link.m4 serial 6 (gettext-0.14.3) -dnl Copyright (C) 2001-2005 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -AC_PREREQ(2.50) - -dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and -dnl augments the CPPFLAGS variable. -AC_DEFUN([AC_LIB_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - define([Name],[translit([$1],[./-], [___])]) - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - ac_cv_lib[]Name[]_libs="$LIB[]NAME" - ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" - ac_cv_lib[]Name[]_cppflags="$INC[]NAME" - ]) - LIB[]NAME="$ac_cv_lib[]Name[]_libs" - LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" - INC[]NAME="$ac_cv_lib[]Name[]_cppflags" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the - dnl results of this search when this library appears as a dependency. - HAVE_LIB[]NAME=yes - undefine([Name]) - undefine([NAME]) -]) - -dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) -dnl searches for libname and the libraries corresponding to explicit and -dnl implicit dependencies, together with the specified include files and -dnl the ability to compile and link the specified testcode. If found, it -dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and -dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and -dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs -dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. -AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - define([Name],[translit([$1],[./-], [___])]) - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - - dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - - dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, - dnl because if the user has installed lib[]Name and not disabled its use - dnl via --without-lib[]Name-prefix, he wants to use it. - ac_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - - AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ - ac_save_LIBS="$LIBS" - LIBS="$LIBS $LIB[]NAME" - AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) - LIBS="$ac_save_LIBS" - ]) - if test "$ac_cv_lib[]Name" = yes; then - HAVE_LIB[]NAME=yes - AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) - AC_MSG_CHECKING([how to link with lib[]$1]) - AC_MSG_RESULT([$LIB[]NAME]) - else - HAVE_LIB[]NAME=no - dnl If $LIB[]NAME didn't lead to a usable library, we don't need - dnl $INC[]NAME either. - CPPFLAGS="$ac_save_CPPFLAGS" - LIB[]NAME= - LTLIB[]NAME= - fi - AC_SUBST([HAVE_LIB]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - undefine([Name]) - undefine([NAME]) -]) - -dnl Determine the platform dependent parameters needed to use rpath: -dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator, -dnl hardcode_direct, hardcode_minus_L. -AC_DEFUN([AC_LIB_RPATH], -[ - dnl Tell automake >= 1.10 to complain if config.rpath is missing. - m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])]) - AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS - AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld - AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host - AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir - AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - ]) - wl="$acl_cv_wl" - libext="$acl_cv_libext" - shlibext="$acl_cv_shlibext" - hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - hardcode_direct="$acl_cv_hardcode_direct" - hardcode_minus_L="$acl_cv_hardcode_minus_L" - dnl Determine whether the user wants rpath handling at all. - AC_ARG_ENABLE(rpath, - [ --disable-rpath do not hardcode runtime library paths], - :, enable_rpath=yes) -]) - -dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. -AC_DEFUN([AC_LIB_LINKFLAGS_BODY], -[ - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_LIB_ARG_WITH([lib$1-prefix], -[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib - --without-lib$1-prefix don't search for lib$1 in includedir and libdir], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/lib" - fi - fi -]) - dnl Search the library and its dependencies in $additional_libdir and - dnl $LDFLAGS. Using breadth-first-seach. - LIB[]NAME= - LTLIB[]NAME= - INC[]NAME= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='$1 $2' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - dnl See if it was already located by an earlier AC_LIB_LINKFLAGS - dnl or AC_LIB_HAVE_LINKFLAGS call. - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" - else - dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined - dnl that this library doesn't exist. So just drop it. - : - fi - else - dnl Search the library lib$name in $additional_libdir and $LDFLAGS - dnl and the already constructed $LIBNAME/$LTLIBNAME. - found_dir= - found_la= - found_so= - found_a= - if test $use_additional = yes; then - if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then - found_dir="$additional_libdir" - found_so="$additional_libdir/lib$name.$shlibext" - if test -f "$additional_libdir/lib$name.la"; then - found_la="$additional_libdir/lib$name.la" - fi - else - if test -f "$additional_libdir/lib$name.$libext"; then - found_dir="$additional_libdir" - found_a="$additional_libdir/lib$name.$libext" - if test -f "$additional_libdir/lib$name.la"; then - found_la="$additional_libdir/lib$name.la" - fi - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then - found_dir="$dir" - found_so="$dir/lib$name.$shlibext" - if test -f "$dir/lib$name.la"; then - found_la="$dir/lib$name.la" - fi - else - if test -f "$dir/lib$name.$libext"; then - found_dir="$dir" - found_a="$dir/lib$name.$libext" - if test -f "$dir/lib$name.la"; then - found_la="$dir/lib$name.la" - fi - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - dnl Found the library. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - dnl Linking with a shared library. We attempt to hardcode its - dnl directory into the executable's runpath, unless it's the - dnl standard /usr/lib. - if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then - dnl No hardcoding is needed. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - dnl The hardcoding into $LIBNAME is system dependent. - if test "$hardcode_direct" = yes; then - dnl Using DIR/libNAME.so during linking hardcodes DIR into the - dnl resulting binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - dnl Rely on "-L$found_dir". - dnl But don't add it if it's already contained in the LDFLAGS - dnl or the already constructed $LIBNAME - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" - fi - if test "$hardcode_minus_L" != no; then - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH - dnl here, because this doesn't fit in flags passed to the - dnl compiler. So give up. No hardcoding. This affects only - dnl very old systems. - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - dnl Linking with a static library. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" - else - dnl We shouldn't come here, but anyway it's good to have a - dnl fallback. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" - fi - fi - dnl Assume the include files are nearby. - additional_includedir= - case "$found_dir" in - */lib | */lib/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - dnl Potentially add $additional_includedir to $INCNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's /usr/local/include and we are using GCC on Linux, - dnl 3. if it's already present in $CPPFLAGS or the already - dnl constructed $INCNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INC[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $INCNAME. - INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - dnl Look for dependencies. - if test -n "$found_la"; then - dnl Read the .la file. It defines the variables - dnl dlname, library_names, old_library, dependency_libs, current, - dnl age, revision, installed, dlopen, dlpreopen, libdir. - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - dnl We use only dependency_libs. - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's /usr/local/lib and we are using GCC on Linux, - dnl 3. if it's already present in $LDFLAGS or the already - dnl constructed $LIBNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/lib"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/lib"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LIBNAME. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LTLIBNAME. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - dnl Handle this in the next round. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - dnl Handle this in the next round. Throw away the .la's - dnl directory; it is already contained in a preceding -L - dnl option. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - dnl Most likely an immediate library name. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" - ;; - esac - done - fi - else - dnl Didn't find the library; assume it is in the system directories - dnl known to the linker and runtime loader. (All the system - dnl directories known to the linker should also be known to the - dnl runtime loader, otherwise the system is severely misconfigured.) - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user must - dnl pass all path elements in one option. We can arrange that for a - dnl single library, but not when more than one $LIBNAMEs are used. - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" - done - dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - else - dnl The -rpath options are cumulative. - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - dnl When using libtool, the option that works for both libraries and - dnl executables is -R. The -R options are cumulative. - for found_dir in $ltrpathdirs; do - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" - done - fi -]) - -dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, -dnl unless already present in VAR. -dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes -dnl contains two or three consecutive elements that belong together. -AC_DEFUN([AC_LIB_APPENDTOVAR], -[ - for element in [$2]; do - haveit= - for x in $[$1]; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - [$1]="${[$1]}${[$1]:+ }$element" - fi - done -]) - -# lib-ld.m4 serial 3 (gettext-0.13) -dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl Subroutines of libtool.m4, -dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision -dnl with libtool.m4. - -dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. -AC_DEFUN([AC_LIB_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -case `$LD -v 2>&1 conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]* | [A-Za-z]:[\\/]*)] - [re_direlt='/[^/][^/]*/\.\./'] - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) +m4_define([AC_LINK_IFELSE], +if test x$gcc_no_link = xyes; then + AC_MSG_ERROR([Link tests are not allowed after [[$0]].]) fi -AC_CACHE_VAL(acl_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break ;; - *) - test "$with_gnu_ld" != yes && break ;; - esac - fi - done - IFS="$ac_save_ifs" -else - acl_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$acl_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) +m4_defn([AC_LINK_IFELSE])) + +dnl This is a shame. We have to provide a default for some link tests, +dnl similar to the default for run tests. +m4_define([AC_FUNC_MMAP], +if test x$gcc_no_link = xyes; then + if test "x${ac_cv_func_mmap_fixed_mapped+set}" != xset; then + ac_cv_func_mmap_fixed_mapped=no + fi fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_LIB_PROG_LD_GNU -]) +if test "x${ac_cv_func_mmap_fixed_mapped}" != xno; then + m4_defn([AC_FUNC_MMAP]) +fi) + +m4_divert_pop()dnl +])# GCC_NO_EXECUTABLES +m4_include([acinclude.m4]) diff --git a/winsup/configure b/winsup/configure index a3ccdd4861..dccf8116a0 100755 --- a/winsup/configure +++ b/winsup/configure @@ -272,12 +272,13 @@ PACKAGE_STRING= PACKAGE_BUGREPORT= ac_unique_file="Makefile.in" -ac_subdirs_all="$ac_subdirs_all cygwin w32api" +ac_subdirs_all="$ac_subdirs_all cygwin" ac_subdirs_all="$ac_subdirs_all mingw" +ac_subdirs_all="$ac_subdirs_all w32api" ac_subdirs_all="$ac_subdirs_all subauth" ac_subdirs_all="$ac_subdirs_all cygserver" ac_subdirs_all="$ac_subdirs_all utils doc" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC ac_ct_CC CFLAGS LDFLAGS CPPFLAGS EXEEXT OBJEXT CXX ac_ct_CXX CXXFLAGS subdirs SET_MAKE LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC ac_ct_CC CFLAGS LDFLAGS CPPFLAGS EXEEXT OBJEXT CXX ac_ct_CXX CXXFLAGS subdirs INSTALL_LICENSE SET_MAKE LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -1457,6 +1458,8 @@ test -n "$target_alias" && NONENONEs,x,x, && program_prefix=${target_alias}- + + if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 @@ -1888,6 +1891,39 @@ main () return 0; } _ACEOF +# FIXME: Cleanup? +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + gcc_no_link=no +else + gcc_no_link=yes +fi + +if test x$gcc_no_link = xyes; then + # Setting cross_compile will disable run tests; it will + # also disable AC_CHECK_FILE but that's generally + # correct if we can't link. + cross_compiling=yes + EXEEXT= +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.exe b.out" # Try to create an executable without -o first, disregard a.out. @@ -2024,6 +2060,7 @@ echo "${ECHO_T}$ac_cv_exeext" >&6 rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT +fi echo "$as_me:$LINENO: checking for suffix of object files" >&5 echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 if test "${ac_cv_objext+set}" = set; then @@ -3015,9 +3052,29 @@ esac fi; +INSTALL_LICENSE= + +case "$target" in + *cygwin*) + if ! test -d $srcdir/cygwin; then + { { echo "$as_me:$LINENO: error: \"No cygwin dir. Can't build Cygwin. Exiting...\"" >&5 +echo "$as_me: error: \"No cygwin dir. Can't build Cygwin. Exiting...\"" >&2;} + { (exit 1); exit 1; }; } + fi + +subdirs="$subdirs cygwin" -subdirs="$subdirs cygwin w32api" + INSTALL_LICENSE="install-license" + ;; + *mingw*) + if ! test -d $srcdir/mingw; then + { { echo "$as_me:$LINENO: error: \"No mingw dir. Can't build Mingw. Exiting...\"" >&5 +echo "$as_me: error: \"No mingw dir. Can't build Mingw. Exiting...\"" >&2;} + { (exit 1); exit 1; }; } + fi + ;; +esac if test -d $srcdir/mingw; then @@ -3026,6 +3083,10 @@ subdirs="$subdirs mingw" fi + +subdirs="$subdirs w32api" + + case "$with_cross_host" in ""|*cygwin*) # if test -d $srcdir/bz2lib; then @@ -3053,6 +3114,8 @@ subdirs="$subdirs utils doc" ;; esac + + echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` @@ -3197,9 +3260,10 @@ for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_i=`echo "$ac_i" | sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs @@ -3745,6 +3809,7 @@ s,@CXX@,$CXX,;t t s,@ac_ct_CXX@,$ac_ct_CXX,;t t s,@CXXFLAGS@,$CXXFLAGS,;t t s,@subdirs@,$subdirs,;t t +s,@INSTALL_LICENSE@,$INSTALL_LICENSE,;t t s,@SET_MAKE@,$SET_MAKE,;t t s,@LIBOBJS@,$LIBOBJS,;t t s,@LTLIBOBJS@,$LTLIBOBJS,;t t diff --git a/winsup/configure.in b/winsup/configure.in index 2eb69fe1fb..a6e10e0da6 100755 --- a/winsup/configure.in +++ b/winsup/configure.in @@ -17,6 +17,8 @@ INSTALL=`cd $srcdir/..; echo $(pwd)/install-sh -c` AC_PROG_INSTALL AC_CANONICAL_SYSTEM +GCC_NO_EXECUTABLES + LIB_AC_PROG_CC LIB_AC_PROG_CXX @@ -31,10 +33,27 @@ no) use_cygserver=;; esac ]) -AC_CONFIG_SUBDIRS(cygwin w32api) +INSTALL_LICENSE= + +case "$target" in + *cygwin*) + if ! test -d $srcdir/cygwin; then + AC_MSG_ERROR("No cygwin dir. Can't build Cygwin. Exiting...") + fi + AC_CONFIG_SUBDIRS(cygwin) + INSTALL_LICENSE="install-license" + ;; + *mingw*) + if ! test -d $srcdir/mingw; then + AC_MSG_ERROR("No mingw dir. Can't build Mingw. Exiting...") + fi + ;; +esac + if test -d $srcdir/mingw; then AC_CONFIG_SUBDIRS(mingw) fi +AC_CONFIG_SUBDIRS(w32api) case "$with_cross_host" in ""|*cygwin*) @@ -54,6 +73,8 @@ case "$with_cross_host" in ;; esac +AC_SUBST(INSTALL_LICENSE) + AC_PROG_MAKE_SET AC_OUTPUT(Makefile)