From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Sat, 2 Jan 2021 20:59:04 +0000 (+0100)
Subject: ARM: dts: meson: add the AO ARC remote processor
X-Git-Url: http://git.osdn.net/view?a=commitdiff_plain;h=fb606cdadbfca902fe7e9619835e1db66141c640;p=uclinux-h8%2Flinux.git

ARM: dts: meson: add the AO ARC remote processor

The 32-bit Amlogic Meson SoCs embed an ARC processor in the Always-On
power domain which is typically used for managing system suspend. The
memory for this ARC core is taken from the AHB SRAM area. Depending on
the actual SoC a different ARC core is used:
- Meson6 and earlier: some ARCv1 ISA based core (probably an ARC625)
- Meson8 and later: an ARC EM4 (ARCv2 ISA) based core

Add the device-tree node for this remote-processor along with the
required SRAM sections, clocks and reset-lines. Also use the
SoC-specific compatible string to manage any differences (should
they exist).

On Meson8, Meson8b and Meson8m2 the "secbus2" IO region is needed as
some bits need to be programmed there. Add this IO region for those
SoCs as well.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210102205904.2691120-6-martin.blumenstingl@googlemail.com
---

diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 7649dd1e0b9e..21ecf3335852 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -195,6 +195,13 @@
 			#size-cells = <1>;
 			ranges = <0x0 0xc8100000 0x100000>;
 
+			ao_arc_rproc: remoteproc@1c {
+				compatible= "amlogic,meson-mx-ao-arc";
+				reg = <0x1c 0x8>, <0x38 0x8>;
+				reg-names = "remap", "cpu";
+				status = "disabled";
+			};
+
 			ir_receiver: ir-receiver@480 {
 				compatible= "amlogic,meson6-ir";
 				reg = <0x480 0x20>;
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 04688e8abce2..93f09b5d1503 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -315,6 +315,14 @@
 	};
 };
 
+&ao_arc_rproc {
+	compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+	amlogic,secbus2 = <&secbus2>;
+	sram = <&ao_arc_sram>;
+	resets = <&reset RESET_MEDIA_CPU>;
+	clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
 &cbus {
 	reset: reset-controller@4404 {
 		compatible = "amlogic,meson8b-reset";
@@ -442,6 +450,12 @@
 };
 
 &ahb_sram {
+	ao_arc_sram: ao-arc-sram@0 {
+		compatible = "amlogic,meson8-ao-arc-sram";
+		reg = <0x0 0x8000>;
+		pool;
+	};
+
 	smp-sram@1ff80 {
 		compatible = "amlogic,meson8-smp-sram";
 		reg = <0x1ff80 0x8>;
@@ -577,6 +591,13 @@
 	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
 };
 
+&secbus {
+	secbus2: system-controller@4000 {
+		compatible = "amlogic,meson8-secbus2", "syscon";
+		reg = <0x4000 0x2000>;
+	};
+};
+
 &sdio {
 	compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
 	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 2401cdf5f751..a285c34aef94 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -266,6 +266,14 @@
 	};
 };
 
+&ao_arc_rproc {
+	compatible= "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
+	amlogic,secbus2 = <&secbus2>;
+	sram = <&ao_arc_sram>;
+	resets = <&reset RESET_MEDIA_CPU>;
+	clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
 &cbus {
 	reset: reset-controller@4404 {
 		compatible = "amlogic,meson8b-reset";
@@ -410,6 +418,12 @@
 };
 
 &ahb_sram {
+	ao_arc_sram: ao-arc-sram@0 {
+		compatible = "amlogic,meson8b-ao-arc-sram";
+		reg = <0x0 0x8000>;
+		pool;
+	};
+
 	smp-sram@1ff80 {
 		compatible = "amlogic,meson8b-smp-sram";
 		reg = <0x1ff80 0x8>;
@@ -574,6 +588,13 @@
 	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
 };
 
+&secbus {
+	secbus2: system-controller@4000 {
+		compatible = "amlogic,meson8b-secbus2", "syscon";
+		reg = <0x4000 0x2000>;
+	};
+};
+
 &sdio {
 	compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
 	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;