OSDN Git Service
Helge Deller [Thu, 31 Jan 2008 11:58:56 +0000 (03:58 -0800)]
[NETFILTER]: nf_log: add netfilter gcc printf format checking
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Engelhardt [Thu, 31 Jan 2008 11:58:24 +0000 (03:58 -0800)]
[NETFILTER]: xt_conntrack: add port and direction matching
Extend the xt_conntrack match revision 1 by port matching (all four
{orig,repl}{src,dst}) and by packet direction matching.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Thu, 31 Jan 2008 11:58:01 +0000 (03:58 -0800)]
[NETFILTER]: nfnetlink_log: fix typo
It should use htonl for the GID, not htons.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Engelhardt [Thu, 31 Jan 2008 11:57:36 +0000 (03:57 -0800)]
linux/types.h: Use __u64 for aligned_u64
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Thu, 31 Jan 2008 11:56:35 +0000 (03:56 -0800)]
[NETFILTER]: bridge netfilter: remove nf_bridge_info read-only netoutdev member
Before the removal of the deferred output hooks, netoutdev was used in
case of VLANs on top of a bridge to store the VLAN device, so the
deferred hooks would see the correct output device. This isn't
necessary anymore since we're calling the output hooks for the correct
device directly in the IP stack.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Thu, 31 Jan 2008 11:56:04 +0000 (03:56 -0800)]
[NETFILTER]: nf_nat: remove double bysource hash initialization
The hash table is already initialized by nf_ct_alloc_hashtable().
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Engelhardt [Thu, 31 Jan 2008 11:54:47 +0000 (03:54 -0800)]
[NETFILTER]: Use const in struct xt_match, xt_target, xt_table
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 31 Jan 2008 11:53:27 +0000 (03:53 -0800)]
[NETFILTER]: Supress some sparse warnings
CHECK net/netfilter/nf_conntrack_expect.c
net/netfilter/nf_conntrack_expect.c:429:13: warning: context imbalance in 'exp_seq_start' - wrong count at exit
net/netfilter/nf_conntrack_expect.c:441:13: warning: context imbalance in 'exp_seq_stop' - unexpected unlock
CHECK net/netfilter/nf_log.c
net/netfilter/nf_log.c:105:13: warning: context imbalance in 'seq_start' - wrong count at exit
net/netfilter/nf_log.c:125:13: warning: context imbalance in 'seq_stop' - unexpected unlock
CHECK net/netfilter/nfnetlink_queue.c
net/netfilter/nfnetlink_queue.c:363:7: warning: symbol 'size' shadows an earlier one
net/netfilter/nfnetlink_queue.c:217:9: originally declared here
net/netfilter/nfnetlink_queue.c:847:13: warning: context imbalance in 'seq_start' - wrong count at exit
net/netfilter/nfnetlink_queue.c:859:13: warning: context imbalance in 'seq_stop' - unexpected unlock
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 31 Jan 2008 11:48:55 +0000 (03:48 -0800)]
[RAW]: Wrong content of the /proc/net/raw6.
The address of IPv6 raw sockets was shown in the wrong format, from
IPv4 ones. The problem has been introduced by the commit
42a73808ed4f30b739eb52bcbb33a02fe62ceef5 ("[RAW]: Consolidate proc
interface.")
Thanks to Adrian Bunk who originally noticed the problem.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 31 Jan 2008 11:46:43 +0000 (03:46 -0800)]
[RAW]: Cleanup IPv4 raw_seq_show.
There is no need to use 128 bytes on the stack at all. Clean the code
in the IPv6 style.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 31 Jan 2008 11:46:12 +0000 (03:46 -0800)]
[RAW]: Family check in the /proc/net/raw[6] is extra.
Different hashtables are used for IPv6 and IPv4 raw sockets, so no
need to check the socket family in the iterator over hashtables. Clean
this out.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Thu, 31 Jan 2008 05:48:24 +0000 (21:48 -0800)]
[IPCOMP]: Fix reception of incompressible packets
I made a silly typo by entering IPPROTO_IP (== 0) instead of
IPPROTO_IPIP (== 4). This broke the reception of incompressible
packets.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 31 Jan 2008 04:07:45 +0000 (20:07 -0800)]
[NET]: should explicitely initialize atomic_t field in struct dst_ops
All but one struct dst_ops static initializations miss explicit
initialization of entries field.
As this field is atomic_t, we should use ATOMIC_INIT(0), and not
rely on atomic_t implementation.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Thu, 31 Jan 2008 04:06:02 +0000 (20:06 -0800)]
[TCP]: NewReno must count every skb while marking losses
NewReno should add cnt per skb (as with FACK) instead of depending on
SACKED_ACKED bits which won't be set with it at all. Effectively,
NewReno should always exists after the first iteration anyway (or
immediately if there's already head in lost_out.
This was fixed earlier in net-2.6.25 but got reverted among other
stuff and I didn't notice that this is still necessary (actually
wasn't even considering this case while trying to figure out the
reports because I lived with different kind of code than it in reality
was).
This should solve the WARN_ONs in TCP code that as a result of this
triggered multiple times in every place we check for this invariant.
Special thanks to Dave Young <hidave.darkstar@gmail.com> and Krishna
Kumar2 <krkumar2@in.ibm.com> for trying with my debug patches.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Tested-by: Dave Young <hidave.darkstar@gmail.com>
Tested-by: Krishna Kumar2 <krkumar2@in.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Thu, 31 Jan 2008 03:31:06 +0000 (19:31 -0800)]
[NETNS]: Fix race between put_net() and netlink_kernel_create().
The comment about "race free view of the set of network
namespaces" was a bit hasty. Look (there even can be only
one CPU, as discovered by Alexey Dobriyan and Denis Lunev):
put_net()
if (atomic_dec_and_test(&net->refcnt))
/* true */
__put_net(net);
queue_work(...);
/*
* note: the net now has refcnt 0, but still in
* the global list of net namespaces
*/
== re-schedule ==
register_pernet_subsys(&some_ops);
register_pernet_operations(&some_ops);
(*some_ops)->init(net);
/*
* we call netlink_kernel_create() here
* in some places
*/
netlink_kernel_create();
sk_alloc();
get_net(net); /* refcnt = 1 */
/*
* now we drop the net refcount not to
* block the net namespace exit in the
* future (or this can be done on the
* error path)
*/
put_net(sk->sk_net);
if (atomic_dec_and_test(&...))
/*
* true. BOOOM! The net is
* scheduled for release twice
*/
When thinking on this problem, I decided, that getting and
putting the net in init callback is wrong. If some init
callback needs to have a refcount-less reference on the struct
net, _it_ has to be careful himself, rather than relying on
the infrastructure to handle this correctly.
In case of netlink_kernel_create(), the problem is that the
sk_alloc() gets the given namespace, but passing the info
that we don't want to get it inside this call is too heavy.
Instead, I propose to crate the socket inside an init_net
namespace and then re-attach it to the desired one right
after the socket is created.
After doing this, we also have to be careful on error paths
not to drop the reference on the namespace, we didn't get
the one on.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Denis Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 31 Jan 2008 03:11:50 +0000 (19:11 -0800)]
[XFRM]: constify 'struct xfrm_type'
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Thery [Thu, 31 Jan 2008 03:09:35 +0000 (19:09 -0800)]
[NETNS]: Add missing initialization of nl_info.nl_net in rtm_to_fib6_config()
Add missing initialization of the new nl_info.nl_net field in
rtm_to_fib6_config(). This will be needed the store network namespace
associated to the fib6_config struct.
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Laszlo Attila Toth [Thu, 31 Jan 2008 03:08:16 +0000 (19:08 -0800)]
[NET]: Introducing socket mark socket option.
A userspace program may wish to set the mark for each packets its send
without using the netfilter MARK target. Changing the mark can be used
for mark based routing without netfilter or for packet filtering.
It requires CAP_NET_ADMIN capability.
Signed-off-by: Laszlo Attila Toth <panther@balabit.hu>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Engelhardt [Thu, 31 Jan 2008 02:55:45 +0000 (18:55 -0800)]
[AF_RXRPC]: constify function pointer tables
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 30 Jan 2008 05:38:52 +0000 (21:38 -0800)]
[BNX2]: Update version to 1.7.3.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 30 Jan 2008 05:38:06 +0000 (21:38 -0800)]
[BNX2]: Update firmware.
Update firmware to support programmable flow control.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 30 Jan 2008 05:37:17 +0000 (21:37 -0800)]
[BNX2]: Fine-tune flow control on 5709.
Make use of the programmable high/low water marks in 5709 for
802.3 flow control.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 30 Jan 2008 05:35:40 +0000 (21:35 -0800)]
[BNX2]: Remove CTX_WR macro.
The CTX_WR macro is unnecessary and obfuscates the code.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 30 Jan 2008 05:35:05 +0000 (21:35 -0800)]
[BNX2]: Remove REG_WR_IND/REG_RD_IND macros.
The REG_WR_IND/REG_RD_IND macros are unnecessary and obfuscate the
code. Many callers to these macros read and write shared memory from
the bp->shmem_base, so we add 2 similar functions that automatically
add the shared memory base.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 30 Jan 2008 05:34:08 +0000 (21:34 -0800)]
[BNX2]: Refine tx coalescing setup.
Make the tx coalescing setup code independent of the MSIX vector.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 30 Jan 2008 05:33:03 +0000 (21:33 -0800)]
[BNX2]: Fix 5706 serdes link down bug.
1. Correct the MII expansion serdes control register definition.
2. Check an additional RUDI_INVALID bit when determining 5706S link.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Young [Wed, 30 Jan 2008 05:14:08 +0000 (21:14 -0800)]
[BLUETOOTH]: Add conn add/del workqueues to avoid connection fail.
The bluetooth hci_conn sysfs add/del executed in the default
workqueue. If the del_conn is executed after the new add_conn with
same target, add_conn will failed with warning of "same kobject name".
Here add btaddconn & btdelconn workqueues, flush the btdelconn
workqueue in the add_conn function to avoid the issue.
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 30 Jan 2008 05:11:46 +0000 (21:11 -0800)]
[IPCOMP]: Fetch nexthdr before ipch is destroyed
When I moved the nexthdr setting out of IPComp I accidently moved
the reading of ipch->nexthdr after the decompression. Unfortunately
this means that we'd be reading from a stale ipch pointer which
doesn't work very well.
This patch moves the reading up so that we get the correct nexthdr
value.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Anastasov [Tue, 29 Jan 2008 05:18:06 +0000 (21:18 -0800)]
[IPV4] fib_trie: apply fixes from fib_hash
Update fib_trie with some fib_hash fixes:
- check for duplicate alternative routes for prefix+tos+priority when
replacing route
- properly insert by matching tos together with priority
- fix alias walking to use list_for_each_entry_continue for insertion
and deletion when fa_head is not NULL
- copy state from fa to new_fa on replace (not a problem for now)
- additionally, avoid replacement without error if new route is same,
as Joonwoo Park suggests.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Anastasov [Tue, 29 Jan 2008 05:14:10 +0000 (21:14 -0800)]
[IPV4] fib: fix route replacement, fib_info is shared
fib_info can be shared by many route prefixes but we don't want
duplicate alternative routes for a prefix+tos+priority. Last change
was not correct to check fib_treeref because it accounts usage from
other prefixes. Additionally, avoid replacement without error if new
route is same, as Joonwoo Park suggests.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Tue, 29 Jan 2008 04:58:46 +0000 (20:58 -0800)]
[SCTP]: Fix miss of report unrecognized HMAC Algorithm parameter
This patch fix miss of check for report unrecognized HMAC Algorithm
parameter. When AUTH is disabled, goto fall through path to report
unrecognized parameter, else, just break
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnaldo Carvalho de Melo [Tue, 29 Jan 2008 04:52:12 +0000 (20:52 -0800)]
[INET_DIAG]: Fix inet_diag_lock_handler error path.
Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=9825
The inet_diag_lock_handler function uses ERR_PTR to encode errors but
its callers were testing against NULL.
This only happens when the only inet_diag modular user, DCCP, is not
built into the kernel or available as a module.
Also there was a problem with not dropping the mutex lock when a handler
was not found, also fixed in this patch.
This caused an OOPS and ss would then hang on subsequent calls, as
&inet_diag_table_mutex was being left locked.
Thanks to spike at ml.yaroslavl.ru for report it after trying 'ss -d'
on a kernel that doesn't have DCCP available.
This bug was introduced in cset
d523a328fb0271e1a763e985a21f2488fd816e7e ("Fix inet_diag dead-lock
regression"), after 2.6.24-rc3, so just 2.6.24 seems to be affected.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 29 Jan 2008 04:47:09 +0000 (20:47 -0800)]
[AUDIT]: Increase skb->truesize in audit_expand
The recent UDP patch exposed this bug in the audit code. It
was calling pskb_expand_head without increasing skb->truesize.
The caller of pskb_expand_head needs to do so because that function
is designed to be called in places where truesize is already fixed
and therefore it doesn't update its value.
Because the audit system is using it in a place where the truesize
has not yet been fixed, it needs to update its value manually.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 29 Jan 2008 04:45:20 +0000 (20:45 -0800)]
[INET]: Prevent out-of-sync truesize on ip_fragment slow path
When ip_fragment has to hit the slow path the value of skb->truesize
may go out of sync because we would have updated it without changing
the packet length. This violates the constraints on truesize.
This patch postpones the update of skb->truesize to prevent this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
maximilian attems [Tue, 29 Jan 2008 04:44:11 +0000 (20:44 -0800)]
[AX25]: Kill ax25_bind() user triggable printk.
on the last run overlooked that sfuzz triggable message.
move the message to the corresponding comment.
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
maximilian attems [Tue, 29 Jan 2008 04:43:16 +0000 (20:43 -0800)]
[AX25]: Beautify x25_init() version printk.
kill ref to old version and dup Linux.
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Tue, 29 Jan 2008 04:28:26 +0000 (20:28 -0800)]
[NET] 9p: kill dead static inline buf_put_string
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Moore [Tue, 29 Jan 2008 03:49:00 +0000 (19:49 -0800)]
[SELinux]: Fix double free in selinux_netlbl_sock_setsid()
As pointed out by Adrian Bunk, commit
45c950e0f839fded922ebc0bfd59b1081cc71b70 ("fix memory leak in netlabel
code") caused a double-free when security_netlbl_sid_to_secattr()
fails. This patch fixes this by removing the netlbl_secattr_destroy()
call from that function since we are already releasing the secattr
memory in selinux_netlbl_sock_setsid().
Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 29 Jan 2008 03:37:29 +0000 (19:37 -0800)]
[IPSEC]: Add support for combined mode algorithms
This patch adds support for combined mode algorithms with GCM being
the first algorithm supported.
Combined mode algorithms can be added through the xfrm_user interface
using the new algorithm payload type XFRMA_ALG_AEAD. Each algorithms
is identified by its name and the ICV length.
For the purposes of matching algorithms in xfrm_tmpl structures,
combined mode algorithms occupy the same name space as encryption
algorithms. This is in line with how they are negotiated using IKE.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 29 Jan 2008 03:35:49 +0000 (19:35 -0800)]
[IPSEC]: Allow async algorithms
Now that ESP uses authenc we can turn on the support for async
algorithms in IPsec.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 29 Jan 2008 03:35:05 +0000 (19:35 -0800)]
[IPSEC]: Use crypto_aead and authenc in ESP
This patch converts ESP to use the crypto_aead interface and in particular
the authenc algorithm. This lays the foundations for future support of
combined mode algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:51 +0000 (00:51 +0200)]
Add new driver 'rndis_wlan' for wireless RNDIS devices.
New driver for wireless RNDIS devices. So far only known chip that uses
wireless RNDIS is Broadcom 4320. Driver detects all RNDIS devices that
have RNDIS wireless physical medium. At least following devices are
detected:
Buffalo WLI-U2-KG125S
U.S. Robotics USR5421
Belkin
F5D7051
Linksys WUSB54GSv2
Linksys WUSB54GSC
Asus WL169gE
Eminent EM4045
BT Voyager 1055
Linksys WUSB54GSv1
U.S. Robotics USR5420
BUFFALO WLI-USB-G54
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:45 +0000 (00:51 +0200)]
Move usbnet.h and rndis_host.h to include/linux/usb
Move headers usbnet.h and rndis_host.h to include/linux/usb and fix includes
for drivers/net/usb modules. Headers are moved because rndis_wlan will be
outside drivers/net/usb in drivers/net/wireless and yet need these headers.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jussi Kivilinna [Sun, 27 Jan 2008 21:34:33 +0000 (23:34 +0200)]
rndis_host: Add RNDIS physical medium checking into generic_rndis_bind()
Add RNDIS physical medium checking into generic_rndis_bind() and also make
rndis_host to be only bind on every medium except wireless.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:34 +0000 (00:51 +0200)]
rndis_host: Add link_change function pointer to 'struct rndis_data'.
Callback to signal link state changes from minidriver to
'subminidrivers'.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:28 +0000 (00:51 +0200)]
rndis_host: Add early_init function pointer to 'struct rndis_data'.
Function pointer is for 'subminidrivers' that need to do work on device
right after minidriver has initialized hardware.
For example, rndis_wlan setting device specific configuration parameters
with OID_GEN_RNDIS_CONFIG_PARAMETER right after rndis_host has
initialized hardware with RNDIS_INIT.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:23 +0000 (00:51 +0200)]
usbnet: add driver_priv pointer to 'struct usbnet'
Add a private data pointer to usbnet for rndis_wlan module to use.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:17 +0000 (00:51 +0200)]
rndis_host: export functions
Export rndis_host functions and also rename rndis_bind() to
generic_rndis_bind() for modules using rndis_host as base.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:12 +0000 (00:51 +0200)]
rndis_host: Split up rndis_host.c
Split up rndis_host.c into rndis_host.h and rndis_base.c. This is done so
that rndis_wlan can reuse common parts with rndis_host.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:06 +0000 (00:51 +0200)]
usbnet: Use wlan device name for RNDIS wireless devices
Use wlan device name for RNDIS wireless devices.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jussi Kivilinna [Fri, 25 Jan 2008 22:51:01 +0000 (00:51 +0200)]
rndis_host: Fix rndis packet filter flags.
RNDIS packet filter flags are not exactly the same as CDC flags
so we cannot reuse them.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jussi Kivilinna [Fri, 25 Jan 2008 22:50:55 +0000 (00:50 +0200)]
rndis_host: Halt device if rndis_bind fails.
When bind fails after device was initialized, shutdown device properly
by sending RNDIS_MSG_HALT.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jussi Kivilinna [Fri, 25 Jan 2008 22:50:49 +0000 (00:50 +0200)]
rndis_host: Use 1KB buffer in rndis_unbind
rndis_command requires the caller to pass in a buffer of at least 1KB.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjorge Dijkstra [Fri, 25 Jan 2008 22:50:44 +0000 (00:50 +0200)]
cdc_ether: Hardwire CDC descriptors when missing
Just as ActiveSync devices, some regular RNDIS devices also lack
the CDC descriptors (e.g. devices based on BCM4320 WLAN chip).
This patch hardwires the CDC descriptors for all RNDIS style devices
when they are missing.
Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjorge Dijkstra [Fri, 25 Jan 2008 22:50:38 +0000 (00:50 +0200)]
rndis_host: Fix sparse warning
rndis_unbind and usbnet_cdc_unbind don't return anything.
Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcin Juszkiewicz [Tue, 29 Jan 2008 08:42:53 +0000 (09:42 +0100)]
Add another Prism2 card to hostap
Card reported by Ångström user:
http://bugs.openembedded.net/show_bug.cgi?id=3236
Socket 1:
product info: "Wireless LAN", "11Mbps PC Card", "Version 01.02", ""
manfid: 0x0156, 0x0002
function: 6 (network)
Signed-off-by: Marcin Juszkiewicz <openembedded@haerwu.biz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Piotrowski [Mon, 28 Jan 2008 22:12:32 +0000 (00:12 +0200)]
hostap_80211.h: remove duplicate prototype
There were two identical prototypes for hostap_80211_rx() in
drivers/net/wireless/hostap/hostap_80211.h.
This patch fixes kernel Bugzilla #8930.
Reported by Christoph Burger-Scheidlin.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cyrill Gorcunov [Sat, 26 Jan 2008 16:09:36 +0000 (19:09 +0300)]
wireless: iwlwifi3945/4965 - fix incorrect counting of memory
This patch does fix incorrect counting of memory allocated by kmalloc.
It seems that could lead to allocated memory overrun and corrupt
nearlaid memory area.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Holger Schurig [Fri, 25 Jan 2008 13:15:48 +0000 (14:15 +0100)]
libertas: fix interrupt while removing driver
Previously I've got an interrupt while removing the driver.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ihar Hrachyshka [Fri, 25 Jan 2008 13:15:00 +0000 (14:15 +0100)]
libertas: fix memory alignment problems on the blackfin
Fixing unaligned memory access on the blackfin architecture (maybe on the
ARM also).
Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@promwad.com>
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Sandeen [Thu, 24 Jan 2008 20:47:39 +0000 (15:47 -0500)]
iwlwifi: correct math in elapsed_jiffies
w/o the first change: if end == start you get MAX_JIFFY_OFFSET which
isn't what you want...
For the latter I think to be technically correct you need the +1 to
account for the jiffy between MAX_JIFFY_OFFSET and 0
(hmm w/ the 2nd change the first isn't strictly needed... ah well)
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iñaky Pérez-González [Wed, 23 Jan 2008 21:40:27 +0000 (13:40 -0800)]
rfkill: add the WiMAX radio type
Teach rfkill about wimax radios.
Had to define a KEY_WIMAX as a 'key for disabling only wimax radios',
as other radio technologies have. This makes sense as hardware has
specific keys for disabling specific radios.
The RFKILL enabling part is, otherwise, a copy and paste of any other
radio technology.
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Buesch [Wed, 23 Jan 2008 20:44:15 +0000 (21:44 +0100)]
b43: Drop packets that we are not able to encrypt
We must not transmit packets we're not able to encrypt.
This fixes a bug where in a tiny timeframe after machine resume
packets can get sent unencrypted and might leak information.
This also fixes three small resource leakages I spotted while fixing
the security problem. Properly deallocate the DMA slots in any DMA
allocation error path.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Buesch [Wed, 23 Jan 2008 20:10:56 +0000 (21:10 +0100)]
b43: Fix suspend/resume
This fixes suspend/resume.
We must not overwrite the MAC addresses on resume. Otherwise
the card won't ACK any packets anymore.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gregory Greenman [Wed, 23 Jan 2008 18:15:21 +0000 (10:15 -0800)]
iwlwifi: Fix uCode error on association
The problem is that priv->assoc_id is set when assoc. resp frame is
received. But, when it is set, LQ cmd is still not sent to the uCode, it is
done from bg_post_assoc, which is called through a workqueue.
On the other hand, when a tx arrives at the moment when this flag is set,
but LQ is still not sent, the if condition in tx_skb will not hold and
the frame will not be dropped. Thus, it will be sent through
which is still not in the sta table in the uCoded.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joonwoo Park [Wed, 23 Jan 2008 18:15:20 +0000 (10:15 -0800)]
iwlwifi: do not schedule tasklet when rcv unused irq
The nic controller's scheduler interrupt (CSR_INT_BIT_SCD) indicates
to the driver that scheduler finished to transmit the frame/frames.
This bit is not used and the tasklet should thus not be scheduled upon
its receipt.
Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reinette Chatre [Wed, 23 Jan 2008 18:15:19 +0000 (10:15 -0800)]
iwlwifi: cleanup usage of inline functions
Be consistent when using inline functions. If the function only used
once we move it to where it is used - no need for externs.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reinette Chatre [Wed, 23 Jan 2008 18:15:18 +0000 (10:15 -0800)]
iwlwifi: initialize geo/channel information during probe
The geo/channel information is obtained from the EEPROM, which is read
during probe. We can thus set up channel information at this time. This
helps us to support ioctl commands that rely on this before the interface
is brought up.
Clearly matches _init_channel_map with _free_channel_map and _init_geos
with _free_geos to ensure functions calling these routines can also call
their cleanup routines.
Fixes a few bugs:
- if channel information is not available when ioctl commands are
issued then we get a NULL pointer oops. Having channel information
set up during probe we can deal with ioctl commands without requiring
interface to be brought up.
This fixes bug: http://www.bughost.org/bugzilla/show_bug.cgi?id=1552
- Fix potential problem if user triggers probe/remove/probe sequence. The
value of priv->channel_count was used to determine if channel map is
set up. This value was never reset when channel map was removed.
- Fix memory leak: priv->modes need to be freed when device removed.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reinette Chatre [Wed, 23 Jan 2008 18:15:17 +0000 (10:15 -0800)]
iwl4965: fix return code indicating one interface is supported
This is a fix to patch "iwlwifi: fix iwl_mac_add_interface handler".
In that patch the return code was corrected for iwl3945, but not for
iwl4965.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maarten Lankhorst [Wed, 23 Jan 2008 18:15:16 +0000 (10:15 -0800)]
iwlwifi: Fix an invalid bitmask test in iwl3945 and iwl4965
Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Bassett [Wed, 23 Jan 2008 16:38:33 +0000 (16:38 +0000)]
rtl8180_dev.c: add support for 1799:700f
I have been using the rtl8180 driver via the git kernel route for a while now and would like to suggest that the following local ammendment is included in the development tree in order to support the PCI device 1799:700f.
This device is found on the 'Belkin Wireless G Desktop Card' product, model 'F5D7000uk'. From memory, the chip on the card is inscribed RTL8185L; (I don't know the significance of the 'L', I'm afraid).
Signed-off-by: Adrian Bassett <adrian.bassett@hotmail.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Rindjunsky [Wed, 23 Jan 2008 16:17:13 +0000 (18:17 +0200)]
mac80211: fixing null qos data frames check for reordering buffer
This patch fixes a wrong condition for null qos data frames, causing us to
drop data frames needed for reordering as well.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Wed, 23 Jan 2008 13:48:50 +0000 (14:48 +0100)]
b43legacy: fix MAC control and microcode init
This zeros out all microcode related memory before loading
the microcode.
This also fixes initialization of the MAC control register.
The _only_ place where we overwrite the contents of the MAC control
register is at the beginning of b43_chip_init().
All other places must do read() -> mask/set -> write() to not
overwrite existing bits.
This also adds a longer delay for waiting for the microcode
to initialize itself. It seems that the current timeout is sufficient
on all available devices, but there's no real reason why we shouldn't
wait for up to one second. Slow embedded devices might exist.
Better safe than sorry.
While at it, fix naming of MACCTL values.
This patch by Michael Buesch has been ported to b43legacy.
Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Buesch [Wed, 23 Jan 2008 11:15:38 +0000 (12:15 +0100)]
b43legacy: Fix rfkill allocation leakage in error paths
We must kill rfkill in any error paths that trigger after rfkill init.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Acked-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Buesch [Wed, 23 Jan 2008 11:02:35 +0000 (12:02 +0100)]
b43: Fix rfkill allocation leakage in error paths
We must kill rfkill in any error paths that trigger after rfkill init.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bruno Randolf [Wed, 23 Jan 2008 01:27:51 +0000 (10:27 +0900)]
ath5k: debug level improvements
* use only one debug level for beacon debugging: unify ATH5K_DEBUG_BEACON and
ATH5K_DEBUG_BEACON_PROC.
* remove debug level ATH5K_DEBUG_FATAL. doesn't make sense as a debug level -
if it's fatal it should be logged as an error.
* fancier printing of debug levels. cat /debugfs/ath5k/phy0/debug.
* allow debug levels to be changed by echoing their name into
/debugfs/ath5k/phy0/debug. this will toggle the state, when it was off it will
be turned on and vice versa.
* use copy_from_user() when reading from the debug files. use unsigned int for
better optimization. reduce buffer sizes on stack.
drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD
drivers/net/wireless/ath5k/debug.c: Changes-licensed-under: GPL
drivers/net/wireless/ath5k/debug.h: Changes-licensed-under: GPL
Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Acked-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Fri, 11 Jan 2008 01:02:51 +0000 (02:02 +0100)]
mac80211: fix alignment warning
When I introduced the alignment warning I forgot the A-MSDU case which
has a different requirement because each frame contains 14-byte 802.3
headers in front of the IP payload. This patch moves the alignment
warning to a place where we know whether we're dealing with an A-MSDU
frame and adjusts it accordingly.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville [Thu, 24 Jan 2008 18:08:01 +0000 (13:08 -0500)]
rt61pci: fix-up merge damage
A subtle merge error was introduced after re-queueing a patch for 2.6.24
instead of 2.6.25...
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trond Myklebust [Fri, 1 Feb 2008 01:40:29 +0000 (20:40 -0500)]
Ensure that we export __fatal_signal_pending()
It may be used by the modules nfs.ko and sunrpc.ko
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[ Made it a regular export rather than GPL-only - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 1 Feb 2008 00:45:47 +0000 (11:45 +1100)]
Merge branch 'task_killable' of git://git./linux/kernel/git/willy/misc
* 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: (22 commits)
Remove commented-out code copied from NFS
NFS: Switch from intr mount option to TASK_KILLABLE
Add wait_for_completion_killable
Add wait_event_killable
Add schedule_timeout_killable
Use mutex_lock_killable in vfs_readdir
Add mutex_lock_killable
Use lock_page_killable
Add lock_page_killable
Add fatal_signal_pending
Add TASK_WAKEKILL
exit: Use task_is_*
signal: Use task_is_*
sched: Use task_contributes_to_load, TASK_ALL and TASK_NORMAL
ptrace: Use task_is_*
power: Use task_is_*
wait: Use TASK_NORMAL
proc/base.c: Use task_is_*
proc/array.c: Use TASK_REPORT
perfmon: Use task_is_*
...
Fixed up conflicts in NFS/sunrpc manually..
Linus Torvalds [Thu, 31 Jan 2008 23:25:09 +0000 (10:25 +1100)]
Merge git://git./linux/kernel/git/mingo/linux-2.6-sched
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
debug: turn ignore_loglevel into an early param
sched: remove unused params
sched: let +nice tasks have smaller impact
sched: fix high wake up latencies with FAIR_USER_SCHED
RCU: add help text for "RCU implementation type"
Linus Torvalds [Thu, 31 Jan 2008 23:16:28 +0000 (10:16 +1100)]
Merge branch 'linus' of git://git./linux/kernel/git/perex/alsa
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (299 commits)
[ALSA] version 1.0.16rc2
[ALSA] hda: fix Mic in as output
[ALSA] emu10k1 - Another EMU0404 Board ID
[ALSA] emu10k1 - Fix kthread handling at resume
[ALSA] emu10k1: General cleanup, add new locks, fix alsa bug#3501, kernel bug#9304.
[ALSA] emu10k1 - Use enum for emu_model types
[ALSA] emu10k1 - Don't create emu1010 controls for non-emu boards
[ALSA] emu10k1 - 1616(M) cardbus improvements
[ALSA] snd:emu10k1: E-Mu updates. Fixes to firmware loading and support for 0404.
[ALSA] emu10k1: Add comments regarding E-Mu ins and outs.
[ALSA] oxygen: revert SPI clock frequency change for AK4396/WM8785
[ALSA] es1938 - improve capture hw pointer reads
[ALSA] HDA-Intel - Add support for Intel SCH
[ALSA] hda: Add GPIO mute support to STAC9205
[ALSA] hda-codec - Add Dell T3400 support
[ALSA] hda-codec - Add model for HP DV9553EG laptop
[ALSA] hda-codec - Control SPDIF as slave
[ALSA] hda_intel: ALSA HD Audio patch for Intel ICH10 DeviceID's
[ALSA] Fix Oops with PCM OSS sync
[ALSA] hda-codec - Add speaker automute to ALC262 HP models
...
Linus Torvalds [Thu, 31 Jan 2008 23:15:32 +0000 (10:15 +1100)]
Merge git://git./linux/kernel/git/x86/linux-2.6-x86
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
asm-generic/tlb.h: build fix
x86: uninline __pte_free_tlb() and __pmd_free_tlb()
x86: fix small sparse warning
x86: fix sparse warning in kernel/scx200_32.c
x86: early_ioremap_reset fix 2
x86: c_p_a clflush_cache_range fix
x86: change_page_attr_clear fix
x86: fix sparse warnings in intel_cacheinfo.c
Ingo Molnar [Thu, 31 Jan 2008 21:45:23 +0000 (22:45 +0100)]
debug: turn ignore_loglevel into an early param
i was debugging early crashes and wondered where all the printks
went. The reason: ignore_loglevel_setup() was not called yet ...
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Gerald Stralko [Thu, 31 Jan 2008 21:45:23 +0000 (22:45 +0100)]
sched: remove unused params
This removes the extra struct task_struct *p parameter in inc_nr_running
and dec_nr_running functions.
Signed-off by: Jerry Stralko <gerb.stralko@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra [Thu, 31 Jan 2008 21:45:22 +0000 (22:45 +0100)]
sched: let +nice tasks have smaller impact
Michel Dänzr has bisected an interactivity problem with
plus-reniced tasks back to this commit:
810e95ccd58d91369191aa4ecc9e6d4a10d8d0c8 is first bad commit
commit
810e95ccd58d91369191aa4ecc9e6d4a10d8d0c8
Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Mon Oct 15 17:00:14 2007 +0200
sched: another wakeup_granularity fix
unit mis-match: wakeup_gran was used against a vruntime
fix this by assymetrically scaling the vtime of positive reniced
tasks.
Bisected-by: Michel Dänzer <michel@tungstengraphics.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Srivatsa Vaddagiri [Thu, 31 Jan 2008 21:45:22 +0000 (22:45 +0100)]
sched: fix high wake up latencies with FAIR_USER_SCHED
The reason why we are getting better wakeup latencies for
!FAIR_USER_SCHED is because of this snippet of code in place_entity():
if (!initial) {
/* sleeps upto a single latency don't count. */
if (sched_feat(NEW_FAIR_SLEEPERS) && entity_is_task(se))
^^^^^^^^^^^^^^^^^^
vruntime -= sysctl_sched_latency;
/* ensure we never gain time by being placed backwards. */
vruntime = max_vruntime(se->vruntime, vruntime);
}
NEW_FAIR_SLEEPERS feature gives credit for sleeping only to tasks and
not group-level entities. With the patch attached, I could see that
wakeup latencies with FAIR_USER_SCHED are restored to the same level as
!FAIR_USER_SCHED.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paul E. McKenney [Thu, 31 Jan 2008 21:45:22 +0000 (22:45 +0100)]
RCU: add help text for "RCU implementation type"
This patch supplies help text for the "RCU implementation type"
kernel configuration choice.
Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 31 Jan 2008 21:05:48 +0000 (22:05 +0100)]
asm-generic/tlb.h: build fix
bring back the avr32, blackfin, sh, sparc architectures into working order,
by reverting the effects of this change that came in via the x86 tree:
commit
a5a19c63f4e55e32dc0bc3d936d7f94793d8b380
Author: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed Jan 30 13:33:39 2008 +0100
x86: demacro asm-x86/pgalloc_32.h
Sorry about that!
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 31 Jan 2008 21:05:48 +0000 (22:05 +0100)]
x86: uninline __pte_free_tlb() and __pmd_free_tlb()
this also removes an include file dependency.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Harvey Harrison [Thu, 31 Jan 2008 21:05:47 +0000 (22:05 +0100)]
x86: fix small sparse warning
arch/x86/kernel/ds.c:226:9: warning: Using plain integer as NULL pointer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Harvey Harrison [Thu, 31 Jan 2008 21:05:45 +0000 (22:05 +0100)]
x86: fix sparse warning in kernel/scx200_32.c
arch/x86/kernel/scx200_32.c:68:72: warning: Using plain integer as NULL pointer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Huang, Ying [Thu, 31 Jan 2008 21:05:45 +0000 (22:05 +0100)]
x86: early_ioremap_reset fix 2
This patch fixes a bug of early_ioremap_reset(), which had been fixed
before by "convert the boot time page table to the kernels native
format" patch. But that patch has been reverted now.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Huang, Ying [Thu, 31 Jan 2008 21:05:45 +0000 (22:05 +0100)]
x86: c_p_a clflush_cache_range fix
Because in i386 early boot stage, boot_cpu_data may be not available,
which makes clflush_cach_range() into infinite loop, which is called
by change_page_attr(). This patch fixes this by setting
boot_cpu_data.x86_clflush_size in early_cpu_detect().
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Huang, Ying [Thu, 31 Jan 2008 21:05:43 +0000 (22:05 +0100)]
x86: change_page_attr_clear fix
This patch replaces __change_page_attr_set_clr() with
change_page_attr_set_clr() in change_page_attr_clear() to flush the
TLB/cache properly.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Harvey Harrison [Thu, 31 Jan 2008 21:05:43 +0000 (22:05 +0100)]
x86: fix sparse warnings in intel_cacheinfo.c
arch/x86/kernel/cpu/intel_cacheinfo.c:355:7: warning: symbol 'i' shadows an earlier one
arch/x86/kernel/cpu/intel_cacheinfo.c:296:39: originally declared here
arch/x86/kernel/cpu/intel_cacheinfo.c:367:18: warning: incorrect type in argument 2 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:18: expected unsigned int *eax
arch/x86/kernel/cpu/intel_cacheinfo.c:367:18: got int *
arch/x86/kernel/cpu/intel_cacheinfo.c:367:28: warning: incorrect type in argument 3 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:28: expected unsigned int *ebx
arch/x86/kernel/cpu/intel_cacheinfo.c:367:28: got int *
arch/x86/kernel/cpu/intel_cacheinfo.c:367:38: warning: incorrect type in argument 4 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:38: expected unsigned int *ecx
arch/x86/kernel/cpu/intel_cacheinfo.c:367:38: got int *
arch/x86/kernel/cpu/intel_cacheinfo.c:367:48: warning: incorrect type in argument 5 (different signedness)
arch/x86/kernel/cpu/intel_cacheinfo.c:367:48: expected unsigned int *edx
arch/x86/kernel/cpu/intel_cacheinfo.c:367:48: got int *
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jaroslav Kysela [Thu, 31 Jan 2008 16:40:18 +0000 (17:40 +0100)]
[ALSA] version 1.0.16rc2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Matthew Ranostay [Wed, 30 Jan 2008 13:58:38 +0000 (14:58 +0100)]
[ALSA] hda: fix Mic in as output
Some laptop has an internal analog microphone that is 'fixed'.
This patch prevents creating a 'Mic In as Output' switch for
ports that can't be outputs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Veli-Matti Valtonen [Mon, 7 Jan 2008 11:36:56 +0000 (12:36 +0100)]
[ALSA] emu10k1 - Another EMU0404 Board ID
This is based on pseudo-random playing around with the capabilities.
With ca0102 this card gives no output atall, ca0108 appears to work
fine, so it rather looks similar to the EMU1010b/EMU1010 changes.
Some other people seem to have succeeded in using this aswell:
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3496
From: Veli-Matti Valtonen <maligor@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Takashi Iwai [Fri, 14 Dec 2007 11:43:00 +0000 (12:43 +0100)]
[ALSA] emu10k1 - Fix kthread handling at resume
Don't create emu1010 kthread again at resume if it's already created.
Also make the thread function static.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>