OSDN Git Service
Daniel P. Berrangé [Fri, 27 May 2022 15:35:59 +0000 (16:35 +0100)]
gitlab: convert Cirrus jobs to .base_job_template
This folds the Cirrus job rules into the base job
template, introducing two new variables
- QEMU_JOB_CIRRUS - identifies the job as making
use of Cirrus CI via cirrus-run
- QEMU_JOB_OPTIONAL - identifies the job as one
that is not run by default, primarily due to
resource constraints. It can be manually invoked
by users if they wish to validate that scenario.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20220526110705.59952-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20220527153603.887929-30-alex.bennee@linaro.org>
Daniel P. Berrangé [Fri, 27 May 2022 15:35:58 +0000 (16:35 +0100)]
gitlab: introduce a common base job template
Currently job rules are spread across the various templates
and jobs, making it hard to understand exactly what runs in
what scenario. This leads to inconsistency in the rules and
increased maint burden.
The intent is that we introduce a common '.base_job_template'
which will have a general purpose 'rules:' block. No other
template or job should define 'rules:', but instead they must
rely on the inherited rules. To allow behaviour to be tweaked,
rules will be influenced by a number of variables with the
naming scheme 'QEMU_JOB_nnnn'.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20220526110705.59952-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20220527153603.887929-29-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:57 +0000 (16:35 +0100)]
configure: remove unused variables from config-host.mak
The only compiler variable that is still needed is $(CC), for
contrib/plugins/Makefile. All firmware builds have their own
config-host.mak file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220517092616.
1272238-17-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-28-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:56 +0000 (16:35 +0100)]
configure: enable cross compilation of vof
While container-based cross compilers are not supported, this already
makes it possible to build vof on any machine that has an installation
of GCC and binutils for 32- or 64-bit PowerPC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220517092616.
1272238-16-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-27-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:55 +0000 (16:35 +0100)]
configure: enable cross-compilation of optionrom
While container-based cross compilers are not supported, this already makes
it possible to build x86 optionroms on any machine that has an installation
of GCC and binutils for 32- or 64-bit x86.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220517092616.
1272238-15-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-26-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:54 +0000 (16:35 +0100)]
configure: enable cross-compilation of s390-ccw
While container-based cross compilers are not supported, this already makes
it possible to build s390-ccw on any machine that has s390x GCC and binutils
installed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220517092616.
1272238-14-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20220527153603.887929-25-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:53 +0000 (16:35 +0100)]
configure: move symlink configuration earlier
Ensure that the pc-bios/optionrom and pc-bios/s390-ccw directory
exist at the time when we'll write out the compiler configuration
for them.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220517092616.
1272238-13-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-24-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:52 +0000 (16:35 +0100)]
configure: include more binutils in tests/tcg makefile
Firmware builds require paths to all the binutils; it is not enough to
use only cc, or even as/ld as in the case of tests/tcg/tricore.
Adjust the cross-compiler configurator to detect also ar, nm, objcopy,
ranlib and strip.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220517092616.
1272238-12-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-23-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:51 +0000 (16:35 +0100)]
configure: introduce --cross-prefix-*=
Also in preparation for handling more binaries from the cross binutils,
support an option --cross-prefix-ARCH. All cross_cc_* defaults are
replaced with cross_prefix_*; the cross_cc_* fallbacks are extended
to the cross-compilation prefix, but the compiler fallbacks remain
as well. This way, for example, --cross-cc-arm=arm-linux-gnueabihf-clang
also applies to armeb binaries.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220517092616.
1272238-11-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-22-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:50 +0000 (16:35 +0100)]
configure: handle host compiler in probe_target_compiler
In preparation for handling more binaries than just cc, handle
the case of "probe_target_compiler $cpu" directly in the function,
setting the target_* variables based on the ones that are used to
build QEMU. The clang check also needs to be moved after this
fallback.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20220517092616.
1272238-10-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-21-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:49 +0000 (16:35 +0100)]
configure: add missing cross compiler fallbacks
The arm compiler can be used for armeb, and the sparc64 compiler
can be used for sparc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20220517092616.
1272238-9-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-20-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:48 +0000 (16:35 +0100)]
tests/tcg: merge configure.sh back into main configure script
tests/tcg/configure.sh has a complicated story.
In the beginning its code ran as part of the creation of config-target.mak
files, and that is where it placed the information on the target compiler.
However, probing for the buildability of TCG tests required multiple
inclusions of config-target.mak in the _main_ Makefile (not in
Makefile.target, which took care of building the QEMU executables in
the pre-Meson era), which polluted the namespace.
Thus, it was moved to a separate directory. It created small config-*.mak
files in $(BUILD_DIR)/tests/tcg. Those were also included multiple
times, but at least they were small and manageable; this was also an
important step in disentangling the TCG tests from Makefile.target.
Since then, Meson has allowed the configure script to go on a diet.
A few compilation tests survive (mostly for sanitizers) but these days
it mostly takes care of command line parsing, looking for tools, and
setting up the environment for Meson to do its stuff.
It's time to extend configure with the capability to build for more
than just one target: not just tests, but also firmware. As a first
step, integrate all the logic to find cross compilers in the configure
script, and move tests/tcg/configure.sh back there (though as a
separate loop, not integrated in the one that generates target
configurations for Meson).
tests/tcg is actually very close to being buildable as a standalone
project, so I actually expect the compiler tests to move back to
tests/tcg, as a "configure" script of sorts which would run at Make
time after the docker images are built. The GCC tree has a similar idea
of doing only bare-bones tree-wide configuration and leaving the rest
for Make time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20220517092616.
1272238-8-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-19-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:47 +0000 (16:35 +0100)]
tests/tcg: correct target CPU for sparc32
We do not want v8plus for pure sparc32, as the difference with the V8 ABI
are only meaningful on 64-bit CPUs suh as ultrasparc; supersparc is the
best CPU to use for 32-bit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20220517092616.
1272238-7-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-18-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:46 +0000 (16:35 +0100)]
configure, meson: move symlinking of ROMs to meson
This is useful because pc-bios/meson.build already has a list of all ROM
files, and thus does not need to use wildcards. The problems with
wildcards are mentioned above the definition of the LINKS variable,
but then the recommendation is disattended.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220517092616.
1272238-6-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-17-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:45 +0000 (16:35 +0100)]
build: do a full build before running TCG tests
TCG tests need both QEMU and firmware to be built, so do "ninja all" before
trying to run them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20220517092616.
1272238-5-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-16-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:44 +0000 (16:35 +0100)]
build: add a more generic way to specify make->ninja dependencies
Let any make target specify ninja goals that needs to be built for it
(though selecting the goals is _not_ recursive on depending targets)
instead of having a custom mechanism only for "make check" and "make
bench".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220517092616.
1272238-4-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-15-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:43 +0000 (16:35 +0100)]
build: clean up ninja invocation
Fix an incorrect "@@:" and move "-d keepdepfile" to the NINJAFLAGS variable.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20220517092616.
1272238-3-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-14-alex.bennee@linaro.org>
Paolo Bonzini [Fri, 27 May 2022 15:35:42 +0000 (16:35 +0100)]
configure: do not define or use the CPP variable
Just hardcode $(CC) -E, it should be enough.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20220517092616.
1272238-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-13-alex.bennee@linaro.org>
Alex Bennée [Fri, 27 May 2022 15:35:41 +0000 (16:35 +0100)]
tests/docker: update debian-amd64 with lcitool
The one minor wrinkle we need to account for is the netmap support
still requires building from source. We also include cscope and GNU
global as they are used in one of the builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Luigi Rizzo <rizzo@iet.unipi.it>
Cc: Giuseppe Lettieri <g.lettieri@iet.unipi.it>
Cc: Vincenzo Maffione <v.maffione@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20220527153603.887929-12-alex.bennee@linaro.org>
Alex Bennée [Fri, 27 May 2022 15:35:40 +0000 (16:35 +0100)]
tests/docker: update debian-ppc64el-cross with lcitool
Use lcitool to update debian-ppc64el-cross to a Debian 11 based system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20220527153603.887929-11-alex.bennee@linaro.org>
Alex Bennée [Fri, 27 May 2022 15:35:39 +0000 (16:35 +0100)]
tests/docker: update debian-mips64el-cross with lcitool
Use lcitool to update debian-mips64el-cross to a Debian 11 based system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20220527153603.887929-10-alex.bennee@linaro.org>
Alex Bennée [Fri, 27 May 2022 15:35:38 +0000 (16:35 +0100)]
tests/docker: update debian-mipsel-cross with lcitool
Use lcitool to update debian-mipsel-cross to a Debian 11 based system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20220527153603.887929-9-alex.bennee@linaro.org>
Alex Bennée [Fri, 27 May 2022 15:35:37 +0000 (16:35 +0100)]
tests/docker: update debian-armel-cross with lcitool
Use lcitool to update debian-armel-cross to a Debian 11 based system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20220527153603.887929-8-alex.bennee@linaro.org>
Alex Bennée [Fri, 27 May 2022 15:35:36 +0000 (16:35 +0100)]
tests/docker: update debian-armhf-cross with lcitool
Use lcitool to update debian-armhf-cross to a Debian 11 based system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20220527153603.887929-7-alex.bennee@linaro.org>
Alex Bennée [Fri, 27 May 2022 15:35:35 +0000 (16:35 +0100)]
tests/lcitool: fix up indentation to correct style
3 space indentation snuck into the initial commit. Clean it up before
we let it get established. I've also:
- removed unused os import
- added double lines between functions
- added some comments and grouped and sorted the generation stanzas
My lint tool is also recommending using f-strings but that requires
python 3.6.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20220527153603.887929-6-alex.bennee@linaro.org>
Alex Bennée [Fri, 27 May 2022 15:35:34 +0000 (16:35 +0100)]
meson.build: fix summary display of test compilers
The recent refactoring of configure.sh dropped a number of variables
we relied on for printing out information. Make it simpler.
Fixes:
eebf199c09 (tests/tcg: invoke Makefile.target directly from QEMU's makefile)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20220527153603.887929-5-alex.bennee@linaro.org>
Marc-André Lureau [Fri, 27 May 2022 15:35:33 +0000 (16:35 +0100)]
gitlab-ci: add meson JUnit test result into report
This allows the gitlab UI to show the test results in different ways,
see doc:
https://docs.gitlab.com/ee/ci/unit_test_reports.html#how-it-works
Previous we only reports avocado test results (.avocado_test_job_template),
with this change, the qemu/meson tests are also covered.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20220525173411.612224-1-marcandre.lureau@redhat.com>
[AJB: expand the commit description]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20220527153603.887929-4-alex.bennee@linaro.org>
Thomas Huth [Fri, 27 May 2022 15:35:32 +0000 (16:35 +0100)]
.gitlab-ci.d/crossbuilds: Fix the dependency of the cross-i386-tci job
The cross-i386-tci job uses the fedora-i386-cross image, so we should make sure
that the corresponding job that builds it (the i386-fedora-cross-container job)
has finished before we start the TCI job.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20220524092600.89997-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20220527153603.887929-3-alex.bennee@linaro.org>
Thomas Huth [Fri, 27 May 2022 15:35:31 +0000 (16:35 +0100)]
.gitlab-ci.d/container-cross: Fix RISC-V container dependencies / stages
The "riscv64-debian-cross-container" job does not depend on any other
container job from the first stage, so we can move it to the first
stage, too.
The "riscv64-debian-test-cross-container" job needs the debian11
container, so we should add a proper "needs:" statement here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20220524093141.91012-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20220527153603.887929-2-alex.bennee@linaro.org>
Richard Henderson [Mon, 30 May 2022 19:40:36 +0000 (12:40 -0700)]
Merge tag 'vmbus-maint-
20220530' of https://github.com/maciejsszmigiero/qemu into staging
Pull request
# -----BEGIN PGP SIGNATURE-----
#
# iQGzBAABCAAdFiEE4ndqq6COJv9aG0oJUrHW6VHQzgcFAmKVB7AACgkQUrHW6VHQ
# zgeKeQwAkIQ6MXRFPoY5DWY7rvtF4uldmPFkRhFZaU31WNjT2NWs4MrPbaD+4c24
# XE6KXX4KBjqa6rTlcF7Q775PWRelmLME3c6n1ovNG4/C1WqPeaivnctqTa0iwDFT
# QnA5Xd0kL9LQkCpeCrSAe6IWQC4Yd3YhFQwfbQR5YDlAljVkcl6AvRQ4H83k93bP
# q8lrNns+m03W/K+7OS+Ul4doqMJ+tLhyN1dhT2OMdyg96aEZR4xnkKvi/IscZ8MX
# 2lpxnkM1KYlQGiyV6dnM+j3kskC1xQrokF3ZbW63g/yt5Iu6fo2OjjDw6yF89PbI
# EzS2PI0lF0m18uf5PSwuvYbiE+5wnmU41JAfG8Sl705ek5XB0KcfgYACG+fgAUMM
# B4zlTYCfcaxcQddRQNoYQTC3q/+QlJjwCnmMpH+WsOX/8+WIBsrTPCvowsomsGHd
# GdljJz3tDU9y3eaZhRmC9bsKE9qXk4+HnpILC/MnlDuBHsDLkprskY2T5pm5xnvb
# CdvaCmTc
# =sgBE
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 30 May 2022 11:06:40 AM PDT
# gpg: using RSA key
E2776AABA08E26FF5A1B4A0952B1D6E951D0CE07
# gpg: Good signature from "Maciej S. Szmigiero <mail@maciej.szmigiero.name>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 727A 0D4D DB9E D9F6 039B ECEF 847F 5E37 90CE 0977
# Subkey fingerprint: E277 6AAB A08E 26FF 5A1B 4A09 52B1 D6E9 51D0 CE07
* tag 'vmbus-maint-
20220530' of https://github.com/maciejsszmigiero/qemu:
hw/hyperv/vmbus: Remove unused vmbus_load/save_req()
MAINTAINERS: Add myself as the maintainer for Hyper-V VMBus
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Philippe Mathieu-Daudé [Sat, 6 Nov 2021 13:41:55 +0000 (14:41 +0100)]
hw/hyperv/vmbus: Remove unused vmbus_load/save_req()
vmbus_save_req() and vmbus_load_req() are not used.
Remove them to avoid maintaining dead code.
This essentially reverts commit
4dd8a7064b8a6527f99a62be11
("vmbus: add infrastructure to save/load vmbus requests").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20211106134155.582312-2-philmd@redhat.com>
[MSS: Remove also corresponding variables, which are now unused]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Maciej S. Szmigiero [Sat, 20 Nov 2021 18:41:58 +0000 (19:41 +0100)]
MAINTAINERS: Add myself as the maintainer for Hyper-V VMBus
This way there is some contact point for incoming patches,
and somebody to review and pick up them.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Richard Henderson [Mon, 30 May 2022 16:22:24 +0000 (09:22 -0700)]
Merge tag 'pull-target-arm-
20220530' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* docs/system/arm: Add FEAT_HCX to list of emulated features
* target/arm/hvf: Include missing "cpregs.h"
* hw/sd/allwinner-sdhost: report FIFO water level as 1 when data ready
* SVE: refactor to use TRANS/TRANS_FEAT macros and push
SVE feature check down to individual insn level
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmKU620ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3lYDEACf8Mt9eYMTNgccjuqrkw+c
# Za1gTcYlz8Jt90dYjAghQVFSnYWTbqdn10+GzadUYRBfl7Py7Jh531RsfOJlXEng
# 0xzJ9Wjl631SIiCOXwp2mx8WaSkFt4QmII/ooBMjmCrudM+OQWKcbwArvcjTxoL/
# 8DrIE/edyxntFN8Owy6kgFNLo/spAac47rOCHUNtWTWA4TDtmo0TU6boN+J1WjCO
# wz1svl/JIS+6iPqx7B50Bm3h7Yb9NF2NbkUJ0AJEaNJovN7ZbPhobVLU8LbcsfK1
# iNAt4s1UVPH+FFTy1oiBu8d5D3sLDAOff7DmLQ6iKWBpevuEvm3VRbOrHIxLTtEL
# ozc9BEBcNuKsKC6bdeAs2WhOWMjyzNdoaJTKUNJrjjJ//yd/sUXM9qi92BpeSo/8
# LXsUtUje2/JY8y7cgUe2u1oyIo/2DkT/FkMSCr2rVpcHXdWe/8wNPlnzu+UZoWnZ
# 5neLqJrqU8gZemje0ZiSJd6+pl2lO+iM/VGJos/NDLK44SJJDj0GkcmzL7eX6eXm
# Gs0qWM1uDcVxKaCiLVHfKsbVC5x8NHSFeWtmY/EqppggtvgF3vSz7EviKpcAu5dQ
# xp7Jqa9p64QE+snHarTCntH9U1L6ioicPPtK7EO3idbvwJ+g0qhYQPZPh37PO8DW
# uSa9a3btDupJFzIgKorSrA==
# =MU42
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 30 May 2022 09:06:05 AM PDT
# gpg: using RSA key
E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-
20220530' of https://git.linaro.org/people/pmaydell/qemu-arm: (117 commits)
target/arm: Remove aa64_sve check from before disas_sve
target/arm: Add sve feature check for remaining trans_* functions
target/arm: Use TRANS_FEAT for do_FMLAL_zzxw
target/arm: Use TRANS_FEAT for do_FMLAL_zzzw
target/arm: Use TRANS_FEAT for do_shr_narrow
target/arm: Use TRANS_FEAT for do_shll_tb
target/arm: Use TRANS_FEAT for do_narrow_extract
target/arm: Use TRANS_FEAT for FCMLA_zzxz
target/arm: Remove assert in trans_FCMLA_zzxz
target/arm: Use TRANS_FEAT for DO_FPCMP
target/arm: Use TRANS_FEAT for DO_FP_IMM
target/arm: Move null function and sve check into do_fp_imm
target/arm: Use TRANS_FEAT for gen_gvec_fpst_zzzzp
target/arm: Introduce gen_gvec_fpst_zzzzp
target/arm: Use TRANS_FEAT for FCADD
target/arm: Use TRANS_FEAT for gen_gvec_fpst_arg_zpzz
target/arm: Rename do_zpzz_ptr to gen_gvec_fpst_arg_zpzz
target/arm: Use TRANS_FEAT for do_ppz_fp
target/arm: Use TRANS_FEAT for FLOGB
target/arm: Use TRANS_FEAT for do_frint_mode
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:19:07 +0000 (11:19 -0700)]
target/arm: Remove aa64_sve check from before disas_sve
We now have individual checks on all insns within disas_sve.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-115-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:19:06 +0000 (11:19 -0700)]
target/arm: Add sve feature check for remaining trans_* functions
For all remaining trans_* functions that do not already
have a check, add one now.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-114-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:19:05 +0000 (11:19 -0700)]
target/arm: Use TRANS_FEAT for do_FMLAL_zzxw
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-113-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:19:04 +0000 (11:19 -0700)]
target/arm: Use TRANS_FEAT for do_FMLAL_zzzw
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-112-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:19:03 +0000 (11:19 -0700)]
target/arm: Use TRANS_FEAT for do_shr_narrow
Rename from do_sve2_shr_narrow and hoist the sve2
check into the TRANS_FEAT macro.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-111-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:19:02 +0000 (11:19 -0700)]
target/arm: Use TRANS_FEAT for do_shll_tb
Rename from do_sve2_shll_tb and hoist the sve2
check into the TRANS_FEAT macro.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-110-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:19:01 +0000 (11:19 -0700)]
target/arm: Use TRANS_FEAT for do_narrow_extract
Rename from do_sve2_narrow_extract and hoist the sve2
check into the TRANS_FEAT macro.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-109-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:19:00 +0000 (11:19 -0700)]
target/arm: Use TRANS_FEAT for FCMLA_zzxz
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-108-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:59 +0000 (11:18 -0700)]
target/arm: Remove assert in trans_FCMLA_zzxz
Since
636ddeb15c0, we do not require rd == ra.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-107-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:58 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for DO_FPCMP
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-106-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:57 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for DO_FP_IMM
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-105-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:56 +0000 (11:18 -0700)]
target/arm: Move null function and sve check into do_fp_imm
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-104-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:55 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for gen_gvec_fpst_zzzzp
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-103-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:54 +0000 (11:18 -0700)]
target/arm: Introduce gen_gvec_fpst_zzzzp
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-102-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:53 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for FCADD
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-101-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:52 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for gen_gvec_fpst_arg_zpzz
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-100-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:51 +0000 (11:18 -0700)]
target/arm: Rename do_zpzz_ptr to gen_gvec_fpst_arg_zpzz
Rename the function to match other expansion functions and
move to be adjacent. Split out gen_gvec_fpst_zzzp as a
helper while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-99-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:50 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_ppz_fp
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-98-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:49 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for FLOGB
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-97-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:48 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_frint_mode
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-96-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:47 +0000 (11:18 -0700)]
target/arm: Move null function and sve check into do_frint_mode
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-95-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:46 +0000 (11:18 -0700)]
target/arm: Rename do_zpz_ptr to gen_gvec_ool_fpst_arg_zpz
Rename the function to match other expansion function and
move to be adjacent. Split out gen_gvec_fpst_zzp as a
helper while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-94-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:45 +0000 (11:18 -0700)]
target/arm: Expand frint_fns for MO_8
Simplify indexing of this array. This will allow folding
of the illegal esz == 0 into the normal fn == NULL check.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-93-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:44 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for FRECPE, FRSQRTE
Rename do_zz_fp to gen_gvec_fpst_arg_zz, and move up.
Split out gen_gvec_fpst_zz as a helper while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-92-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:43 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_reduce
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-91-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:42 +0000 (11:18 -0700)]
target/arm: Move null function and sve check into do_reduce
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-90-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:41 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for FTMAD
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-89-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:40 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for FMUL_zzx
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-88-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:39 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for DO_FP3
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-87-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:38 +0000 (11:18 -0700)]
target/arm: Rename do_zzz_fp to gen_gvec_ool_fpst_arg_zzz
Rename the function to match gen_gvec_ool_arg_zzz,
and move to be adjacent. Split out gen_gvec_fpst_zzz
as a helper while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-86-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:37 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for BFMLA
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-85-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:36 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for FMLA
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-84-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:35 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for MOVPRFX
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-83-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:34 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for SEL_zpzz
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-82-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:33 +0000 (11:18 -0700)]
target/arm: Implement NOT (prediates) alias
This alias is defined on EOR (prediates). While the
same operation could be performed with NAND or NOR,
only bother with the official alias.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-81-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:32 +0000 (11:18 -0700)]
target/arm: Move sve check into gen_gvec_fn_ppp
Combined with the check already present in gen_mov_p,
we can simplify some special cases in trans_AND_pppp
and trans_BIC_pppp.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-80-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:31 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for FMMLA
Being able to specify the feature predicate in TRANS_FEAT
makes it easier to split trans_FMMLA by element size,
which also happens to simplify the decode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-79-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:30 +0000 (11:18 -0700)]
target/arm: Introduce gen_gvec_{ptr,fpst}_zzzz
Use these for the several varieties of floating-point
multiply-add instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-78-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:29 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_zzi_ool
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-77-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:28 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_zzi_sat
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-76-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:27 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for ADD_zzi
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-75-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:26 +0000 (11:18 -0700)]
target/arm: Reject copy w/ shifted byte early
Remove the unparsed extractions in trans_CPY_{m,z}_i which are intended
to reject an 8-bit shift of an 8-bit constant for 8-bit element.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-74-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:25 +0000 (11:18 -0700)]
target/arm: Reject add/sub w/ shifted byte early
Remove the unparsed extractions in trans_ADD_zzi, trans_SUBR_zzi,
and do_zzi_sat which are intended to reject an 8-bit shift of an
8-bit constant for 8-bit element.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-73-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:24 +0000 (11:18 -0700)]
target/arm: Reject dup_i w/ shifted byte early
Remove the unparsed extraction in trans_DUP_i,
which is intended to reject an 8-bit shift of
an 8-bit constant for 8-bit element.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-72-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:23 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for MUL_zzi
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-71-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:22 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_brk2, do_brk3
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-70-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:21 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_ppzi_flags
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-69-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:20 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_sve2_ppzz_flags
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-68-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:19 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_ppzz_flags
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-67-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:18 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for SPLICE
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-66-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:17 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_last_general
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-65-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:16 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_last_fp
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-64-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:15 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_clast_general
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-63-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:14 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_clast_fp
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-62-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:13 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_clast_vector
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-61-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:12 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_zip, do_zip_q
Convert SVE translation functions using do_zip*
to use TRANS_FEAT and gen_gvec_ool_arg_zzz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-60-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:11 +0000 (11:18 -0700)]
target/arm: Use gen_gvec_ool_arg_zzz for do_zip, do_zip_q
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-59-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:10 +0000 (11:18 -0700)]
target/arm: Move sve zip high_ofs into simd_data
This is in line with how we treat uzp, and will
eliminate the special case code during translation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-58-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:09 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_perm_pred2
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-57-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:08 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_perm_pred3
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-56-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:07 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_EXT
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-55-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:06 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_pfirst_pnext
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-54-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:05 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for RDFFR, WRFFR
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-53-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:04 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_predset
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-52-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:03 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_adr
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-51-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:02 +0000 (11:18 -0700)]
target/arm: Use TRANS_FEAT for do_index
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-50-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 27 May 2022 18:18:01 +0000 (11:18 -0700)]
target/arm: Move sve check into do_index
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220527181907.189259-49-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>