OSDN Git Service
Paolo Bonzini [Mon, 14 Nov 2011 13:31:48 +0000 (14:31 +0100)]
scsi: update list of commands
Add more commands and their names, and remove SEEK(6) which is obsolete.
Instead, use SET_CAPACITY which is still in SSC.
Tested-by: Thomas Schmitt <scdbackup@gmx.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 14 Nov 2011 13:31:47 +0000 (14:31 +0100)]
atapi: kill MODE SENSE(6), fix MODE SENSE(10)
Mode page 2A of emulated ATAPI DVD-ROM should have page length 0x14
like SCSI CD-ROM, rather than 0x12.
Mode page length is off by 8, as it should contain the length of the
payload after the first two bytes.
MODE SENSE(6) should be thrown out of ATAPI DVD-ROM emulation. It is
not specified in the ATAPI list of MMC-2, and MMC-5 prescribes to use
MODE SENSE(10). Anyway, its implementation is wrong.
Reported-by: Thomas Schmitt <scdbackup@gmx.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Tue, 15 Nov 2011 15:57:50 +0000 (16:57 +0100)]
scsi-disk: guess geometry
Old operating systems rely on correct geometry to convert from CHS
addresses to LBA. Providing correct data is necessary for them to boot.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Tue, 15 Nov 2011 16:36:38 +0000 (17:36 +0100)]
scsi: fix fw path
The pre-1.0 firmware path for SCSI devices already included the LUN
using the suffix argument to add_boot_device_path. I missed that when
making channel and LUN customizable. Avoid that it is included twice, and
convert the colons to commas for consistency with other kinds of devices
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ronnie Sahlberg [Sat, 12 Nov 2011 00:06:30 +0000 (11:06 +1100)]
Documentation: Add section about iSCSI LUNS to qemu-doc
Add a new section about using iSCSI LUNs with qemu
and provide a short example on how to set up a target and access it
using the built-in initiator
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anthony Liguori [Mon, 14 Nov 2011 17:02:38 +0000 (11:02 -0600)]
Update version to 1.0-rc2
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alon Levy [Sun, 13 Nov 2011 13:27:51 +0000 (15:27 +0200)]
pc_piix: set qxl revision to 2 for pc-0.14
The default is still 3, and I didn't change older machine types.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Mon, 7 Nov 2011 13:25:45 +0000 (13:25 +0000)]
hw/omap_gpio: Fix infinite recursion when doing 8/16 bit reads
Fix a long-standing bug which meant that any attempt to do an
8 or 16 bit read from the OMAP GPIO module would cause qemu to
crash due to an infinite recursion.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andrzej Zaborowski [Mon, 14 Nov 2011 17:17:59 +0000 (18:17 +0100)]
Revert bugfix
e7852674d5 until tested or until after the release.
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Juha Riihimäki [Thu, 20 Oct 2011 12:53:35 +0000 (14:53 +0200)]
hw/onenand: reject read-only drives
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Juha Riihimäki [Thu, 20 Oct 2011 12:53:34 +0000 (14:53 +0200)]
hw/nand: reject read-only drives
also gracefully fail on nand_device_init() for unsupported block
size instead of aborting.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Jean-Christophe DUBOIS [Mon, 14 Nov 2011 02:09:20 +0000 (03:09 +0100)]
hw/arm_sysctl: Fix RESETCTL for realview-pb-a8 and -pbx-a9
Depending on the considered baseboard the bit used to
reset the platform is different.
Here is the list of considered Realview/Versatile platforms:
Realview/Versatile AB for ARM926EJ-S: BOARD_ID = 0x100 = BOARD_ID_PB9
http://infocenter.arm.com/help/topic/com.arm.doc.dui0225d/CACCIFGI.html
RealView Emulation Baseboard: BOARD_ID = 0x140 = BOARD_ID_EB
No reset register
RealView PB for Cortex-A8: BOARD_ID = 0x178 = BOARD_ID_PBA8
http://infocenter.arm.com/help/topic/com.arm.doc.dui0417d/BBACIGAD.html
RealView PB for Cortex-A9: BOARD_ID = 0x182 = BOARD_ID_PBX
http://infocenter.arm.com/help/topic/com.arm.doc.dui0440b/CACCHBFB.html
Motherboard Express =C2=B5ATX: BOARD_ID = 0x190 = BOARD_ID_VEXPRESS
No reset register
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Peter Maydell [Sun, 13 Nov 2011 14:18:39 +0000 (14:18 +0000)]
hw/pxa2xx.c: Fix handling of RW bits in PMCR
Fix an error in commit
afd4a6522 which meant that writing a zero
to the RW bits in the PMCR wouldn't actually clear them. (Error
spotted by Andrzej Zaborowski.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Peter Maydell [Wed, 9 Nov 2011 21:09:23 +0000 (21:09 +0000)]
hw/usb-net.c: Fix precedence bug when checking rndis_state
"!X == 2" is always false (spotted by Coverity), so the checks
for whether rndis is in the correct state would never fire.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Avi Kivity [Sun, 13 Nov 2011 10:00:55 +0000 (12:00 +0200)]
memory: fix 'info mtree' segfaults
'info mtree' accesses invalid memory in two cases, both due to incorrect
(and unsafe) usage of QTAILQ_FOREACH_SAFE().
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Anthony Liguori [Fri, 11 Nov 2011 23:26:37 +0000 (17:26 -0600)]
Merge remote-tracking branch 'kwolf/block-stable' into staging
Max Filippov [Thu, 10 Nov 2011 11:38:42 +0000 (15:38 +0400)]
vl.c: prohibit simultaneous use of -icount with kvm or xen
With -icount, The vm_clock is updated with help from TCG (it counts
instructions at 2^ICOUNT ns/instructions). With KVM, the instruction
count is not available so KVM cannot provide this help.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Fri, 11 Nov 2011 13:30:15 +0000 (13:30 +0000)]
hw/arm_timer.c: Fix bounds check for Integrator timer accesses
There are only three counter/timers on the integrator board:
correct the bounds check to avoid an array overrun. (Spotted
by Coverity, see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Wed, 9 Nov 2011 20:46:35 +0000 (20:46 +0000)]
hw/pxa2xx.c: Fix handling of R/WC bits in PMCR
Fix a bug in handling the write-one-to-clear bits in the PMCR
which meant that we would always clear the bit even if the
value written was a zero. Spotted by Coverity (see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Wed, 9 Nov 2011 20:04:54 +0000 (20:04 +0000)]
hw/pl061: Remove pointless comparison of array to null
Remove a pointless comparison of an array to null. (There is
no need to check whether s->out[i] is non-null as qemu_set_irq
will do that for us.) Spotted by Coverity (see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Wed, 9 Nov 2011 19:34:28 +0000 (19:34 +0000)]
hw/tc58128.c: Remove unnecessary check for g_malloc failure
Remove a check for g_malloc failing: this never happens.
Also use g_malloc rather than g_malloc0 as we immediately
memset the entire region and so zero-initialising it is pointless.
Spotted by Coverity (see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Wed, 9 Nov 2011 19:22:11 +0000 (19:22 +0000)]
linux-user/elfload.c: Don't memset(NULL..) if malloc() failed
If a malloc() in copy_elf_strings() failed we would call memset()
before the "did malloc fail?" check. Fix this by moving to the
glib alloc/free routines for this memory so we can use g_try_malloc0
rather than having a separate memset(). Spotted by Coverity (see
bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Wed, 9 Nov 2011 18:45:38 +0000 (18:45 +0000)]
hw/omap_intc.c: Avoid crash on access to nonexistent banked registers
Avoid a crash due to null pointer dereference if a guest attempts
to access banked registers for a nonexistent bank. Spotted by
Coverity (see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Fri, 11 Nov 2011 09:40:09 +0000 (10:40 +0100)]
os-posix: Plug fd leak in qemu_create_pidfile()
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Fri, 11 Nov 2011 09:40:08 +0000 (10:40 +0100)]
posix-aio-compat: Plug memory leak on paio_init() error path
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Fri, 11 Nov 2011 09:40:07 +0000 (10:40 +0100)]
qemu-sockets: Plug fd leak on unix_connect_opts() error path
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Fri, 11 Nov 2011 09:40:06 +0000 (10:40 +0100)]
ui: Plug memory leaks on parse_keyboard_layout() error path
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Fri, 11 Nov 2011 09:40:05 +0000 (10:40 +0100)]
qemu-char: Plug memory leak on qemu_chr_open_pty() error path
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Wed, 9 Nov 2011 20:29:01 +0000 (21:29 +0100)]
migration: fix detached migration with fd
Migration with fd uses s->mon to pass the fd. But we only assign the
s->mon for !detached migration. Fix it. Once there add a comment
indicating that s->mon has two uses.
Bug reported by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CC: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Pavel Borzenkov [Thu, 10 Nov 2011 20:26:59 +0000 (00:26 +0400)]
configure: Do not use 'sed -i'
'sed -i' is not defined in POSIX. It doesn't work on Mac OS X the way
it's used in configure (without suffix argument). This patch implements
Peter Maydell's idea of xattr.h detection.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andreas Färber [Thu, 10 Nov 2011 15:35:32 +0000 (16:35 +0100)]
vl.c: Fail gracefully if no machine is found
machine defaults to find_default_machine(),
then gets overridden via -M and machine_parse().
If no -M is specified and find_default_machine() returns NULL
(when no machine compiled in), exit with an error.
Avoids a segfault when setting machine->max_cpus.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Thu, 10 Nov 2011 17:13:59 +0000 (18:13 +0100)]
block: Make cache=unsafe flush to the OS
cache=unsafe completely ignored bdrv_flush, because flushing the host disk
costs a lot of performance. However, this means that qcow2 images (and
potentially any other format) can lose data even after the guest has issued a
flush if the qemu process crashes/is killed. In case of a host crash, data loss
is certainly expected with cache=unsafe, but if just the qemu process dies this
is a bit too unsafe.
Now that we have two separate flush functions, we can choose to flush
everythign to the OS, but don't enforce that it's physically written to the
disk.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 10 Nov 2011 17:10:11 +0000 (18:10 +0100)]
block: Introduce bdrv_co_flush_to_os
qcow2 has a writeback metadata cache, so flushing a qcow2 image actually
consists of writing back that cache to the protocol and only then flushes the
protocol in order to get everything stable on disk.
This introduces a separate bdrv_co_flush_to_os to reflect the split.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 10 Nov 2011 16:25:44 +0000 (17:25 +0100)]
block: Rename bdrv_co_flush to bdrv_co_flush_to_disk
There are two different types of flush that you can do: Flushing one level up
to the OS (i.e. writing data to the host page cache) or flushing it all the way
down to the disk. The existing functions flush to the disk, reflect this in the
function name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Maydell [Wed, 9 Nov 2011 21:59:50 +0000 (21:59 +0000)]
hw/pc.c: Fix use-while-uninitialized of fd_type[]
Fix a use-while-uninitialized of the fd_type[] array (introduced
in commit
34d4260e1, noticed by Coverity). This is more theoretical
than practical, since it's quite hard to get here with floppy==NULL
(the qdev_try_create() of the isa-fdc device has to fail).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Charles Arnold [Wed, 9 Nov 2011 16:32:25 +0000 (09:32 -0700)]
block: Fix vpc initialization of the Dynamic Disk Header
The Data Offset field in the Dynamic Disk Header is an 8 byte field.
Although the specification (2006-10-11) gives an example of initializing
only the first 4 bytes, images generated by Microsoft on Windows initialize
all 8 bytes.
Failure to initialize all 8 bytes results in errors from utilities
like Citrix's vhd-util which checks specifically for the proper Data
Offset field initialization.
Signed-off-by: Charles Arnold <carnold@suse.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 4 Nov 2011 14:51:24 +0000 (15:51 +0100)]
qemu-nbd: open the block device after starting the client thread
This is cleaner, because we do not need to close the block device when
there is an error opening /dev/nbdX. It was done this way only to
print errors before daemonizing.
At the same time, use atexit to ensure that the block device is closed
whenever we exit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 4 Nov 2011 14:51:23 +0000 (15:51 +0100)]
qemu-nbd: fix socket creation race
Now that the client and server are in the same process, there is
no need to race on the creation of the socket. We can open the
listening socket before starting the client thread.
This avoids that "qemu-nbd -v -c" prints this once before connecting
successfully to the socket:
connect(unix:/var/lock/qemu-nbd-nbd0): No such file or directory
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 4 Nov 2011 14:51:22 +0000 (15:51 +0100)]
qemu-nbd: print error messages from the daemon through a pipe
In order to get nice error messages, keep the qemu-nbd process running
until before issuing NBD_DO_IT and connected to the daemon with a pipe.
This lets the qemu-nbd process relay error messages from the daemon and
exit with a nonzero status if appropriate.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 4 Nov 2011 14:51:21 +0000 (15:51 +0100)]
qemu-nbd: move client to a thread
This avoids that qemu-nbd uses both forking and threads, which do
not behave well together.
qemu-nbd is already Unix only, and there is no qemu_thread_join,
so for now use pthreads.
Since the parent and child no longer have separate file descriptors,
we can open the NBD device before daemonizing, instead of checking
with access(2) and restricting the open to the client only.
Reported-by: Pierre Riteau <pierre.riteau@irisa.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 4 Nov 2011 14:51:20 +0000 (15:51 +0100)]
qemu-nbd: rename socket variable
It will be moved to a global variable by the next patch, and it
would conflict with the socket function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 4 Nov 2011 14:51:19 +0000 (15:51 +0100)]
qemu-nbd: trap SIGTERM
The client process right now uses SIGTERM to interrupt the server side.
This does not affect the exit status of "qemu-nbd -v -c" because the
server is a child process. This will change when both sides will be
in the same process, and anyway cleaning up things nicely upon SIGTERM
is good practice.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 4 Nov 2011 14:51:18 +0000 (15:51 +0100)]
nbd: treat EPIPE from NBD_DO_IT as success
This can be seen with "qemu-nbd -v -c", which returns 1 instead of 0
when you disconnect with "qemu-nbd -d".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Tue, 25 Oct 2011 10:53:40 +0000 (12:53 +0200)]
scsi-disk: implement eject requests
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Tue, 25 Oct 2011 10:53:39 +0000 (12:53 +0200)]
atapi: implement eject requests
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 7 Nov 2011 16:50:13 +0000 (17:50 +0100)]
block: add eject request callback
Recent versions of udev always keep the tray locked so that the kernel
can observe "eject request" events (aka tray button presses) even on
discs that aren't mounted. Add support for these events in the ATAPI
and SCSI cd drive device models.
To let management cope with the behavior of udev, an event should also
be added for "tray opened/closed". This way, after issuing an "eject"
command, management can poll until the guests actually reacts to the
command. They can then issue the "change" command after the tray has been
opened, or try with "eject -f" after a (configurable?) timeout. However,
with this patch and the corresponding support in the device models,
at least it is possible to do a manual two-step eject+change sequence.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 8 Nov 2011 09:50:12 +0000 (10:50 +0100)]
vvfat: Fix read-write mode
vvfat used to directly call into the qcow2 block driver instead of using the
block.c wrappers. With the coroutine conversion, this stopped working.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Wed, 9 Nov 2011 18:59:54 +0000 (18:59 +0000)]
hw/lan9118.c: Add missing 'break' to fix buffer overrun
Add a missing 'break' statement to fix a buffer overrun when
executing the EEPROM write-all command. Spotted by Coverity
(see bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Markus Armbruster [Tue, 8 Nov 2011 14:36:50 +0000 (15:36 +0100)]
x86/cpuid: Fix crash on -cpu ""
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Markus Armbruster [Tue, 8 Nov 2011 14:36:49 +0000 (15:36 +0100)]
x86/cpuid: Plug memory leak in cpudef_setfield()
To reproduce the leak, put two name options into the same [cpudef]
section of target-x86_64.conf.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Markus Armbruster [Tue, 8 Nov 2011 14:36:48 +0000 (15:36 +0100)]
x86/cpuid: Convert remaining strdup() to g_strdup()
Fixes missing error checking.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Markus Armbruster [Tue, 8 Nov 2011 12:45:21 +0000 (13:45 +0100)]
ui/vnc: Convert sasl.mechlist to g_malloc() & friends
Fixes protocol_client_auth_sasl_mechname() not to crash when malloc()
fails. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Markus Armbruster [Tue, 8 Nov 2011 10:00:38 +0000 (11:00 +0100)]
qdev: Fix crash on -device '?=x'
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
陳韋任 [Mon, 7 Nov 2011 09:42:05 +0000 (17:42 +0800)]
configure: Show --cpu option on the help list
Signed-off-by: Chen Wen-Ren (陳韋任) <chenwj@iis.sinica.edu.tw>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
陳韋任 [Fri, 4 Nov 2011 17:14:44 +0000 (01:14 +0800)]
qemu-tech.texi: Update default code cache size
Update the document since the default code cache size is 32 MB now.
Signed-off-by: chenwj <chenwj@cs.nctu.edu.tw>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Max Filippov [Wed, 9 Nov 2011 01:18:09 +0000 (05:18 +0400)]
hpet: fix infinite loop in qemu_run_timers with -icount enabled
hpet_timer timer callback rearms itself based on difference between
current HPET tick counter and comparator value. Difference calculated by
the hpet_calculate_diff function is limited to non-negative values.
cur_tick is calculated via hpet_get_ticks that uses qemu_get_clock_ns(vm_clock).
With -icount enabled vm_clock doesn't advance during qemu_run_timers
loop thus once difference is zero, qemu_run_timers loops forever
handling hpet_timer.
Limit hpet_calculate_diff results to positive only values to avoid that
infinite loop.
This fixes the following qemu-system-x86_64 hang when it reaches
timer_irq_works() in the linux bootup:
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1000.054 MHz processor.
[ 0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.10 BogoMIPS (lpj=
10000540)
[ 0.000404] pid_max: default: 32768 minimum: 301
[ 0.001138] Mount-cache hash table entries: 256
[ 0.003883] Initializing cgroup subsys ns
[ 0.004035] Initializing cgroup subsys cpuacct
[ 0.004280] Initializing cgroup subsys freezer
[ 0.004790] Performance Events: AMD PMU driver.
[ 0.004985] ... version: 0
[ 0.005134] ... bit width: 48
[ 0.005285] ... generic registers: 4
[ 0.005437] ... value mask:
0000ffffffffffff
[ 0.005625] ... max period:
00007fffffffffff
[ 0.005807] ... fixed-purpose events: 0
[ 0.005957] ... event mask:
000000000000000f
[ 0.006275] SMP alternatives: switching to UP code
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Wed, 9 Nov 2011 17:42:23 +0000 (17:42 +0000)]
hw/omap_gpmc.c: Add missing 'break's to fix 8 bit NAND writes
Add missing 'break' statements which would have meant that writing
to an 8 bit NAND device was broken. Spotted by Coverity (see bug
887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Wed, 9 Nov 2011 17:20:06 +0000 (17:20 +0000)]
hw/omap_dss.c: Fix !-vs-~ bug in handling DISPC_CONTROL
Fix a bug revealed by a coverity scan (see bug 887883) which meant
that we would never print the warning about unpredictable behaviour
if a nonexistent overlay is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Wed, 9 Nov 2011 13:44:36 +0000 (15:44 +0200)]
i386: derive '-cpu host' from KVM_GET_SUPPORTED_CPUID
The fact that a host cpu supports a feature doesn't mean that QEMU and KVM
will also support it, yet -cpuid host brings host features wholesale.
We need to whitelist each feature separately to make sure we support it.
This patch adds KVM whitelisting (by simply using KVM_GET_SUPPORTED_CPUID
instead of the CPUID instruction).
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Wed, 9 Nov 2011 12:44:52 +0000 (14:44 +0200)]
configure: fix detection for xattr.h on modern distributions
Modern distributions place xattr.h in /usr/include/sys, and fold
libattr.so into libc. They also don't have an ENOATTR.
Make configure detect this, and add a qemu-xattr.h file that
directs the #include to the right place.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Tue, 8 Nov 2011 09:58:00 +0000 (10:58 +0100)]
Clean up assertion in get_boot_devices_list()
g_strdup() can't fail, remove assertion. Assert its argument can't be
null, because that's not obvious (add_boot_device_path() ensures it).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fabien Chouteau [Mon, 7 Nov 2011 14:36:14 +0000 (15:36 +0100)]
Replace WriteFileEx with WriteFile in qemu_create_pidfile
The function that writes pidfile for win32 uses WriteFileEx which is an
asynchronous IO function. The arguments given to WriteFileEx are allocated on
the stack and one of them is "in out". When the IO operation is actually
executed the calling function has already returned, so the arguments are no
longer allocated or allocated to another frame.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 9 Nov 2011 11:46:56 +0000 (12:46 +0100)]
win32: remove broken timers
The non-dynticks timer variations are broken, so they can be
removed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Edgar E. Iglesias [Mon, 7 Nov 2011 23:00:55 +0000 (00:00 +0100)]
virtex: Remove memset of clk_setup
clk_setup is now a function. Fixes a segfault.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Anthony Liguori [Mon, 7 Nov 2011 16:57:45 +0000 (10:57 -0600)]
Update version for v1.0-rc1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Fri, 4 Nov 2011 09:38:29 +0000 (10:38 +0100)]
console: Fix rendering of VGA underline
vga_putcharxy()'s underline code sets font_data to 0xffff instead of
0xff. vga_putcharxy() then reads dmask16[0xffff >> 4] and
dmask4[0xffff >> 6]. In practice, these out-of-bounds subscripts
"only" put a few crap bits into the display surface.
For 32 bit pixels, there's no array access. font_data's extra bits go
straight into the display surface.
Broken when commit
6d6f7c28 implemented underline.
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gleb Natapov [Sun, 6 Nov 2011 16:00:22 +0000 (18:00 +0200)]
qemu_timedate_diff() shouldn't modify its argument.
The caller of qemu_timedate_diff() does not expect that tm it passes to
the function will be modified, but mktime() is destructive and modifies
its argument. Pass a copy of tm to it and set tm_isdst so that mktime()
will not rely on it since its value may be outdated.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Wen Congyang [Fri, 4 Nov 2011 02:45:58 +0000 (10:45 +0800)]
reenable vm_clock when resuming all vcpus
We disable vm_clock when pausing all vcpus, but we forget to
reenable it when resuming all vcpus. It will cause that the
guest can not be rebooted.
Tested-by: Zhi Yong Wu <zwu.kernel@gmai.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 3 Nov 2011 17:21:54 +0000 (18:21 +0100)]
qxl: fix vga port initialization.
Commit
0a039dc70096b768d3810afa50ba1d214768aaf4 broke vga modes for
qxl-vga by loosing vga_ioport_read windup. qxl needs to hook into
vga port writes only and used to realize that by letting vga_init() do
the work for both reads and writes, then overwrite the write function.
That little detail was missed while doing the conversion ...
This patch fixes it. It also switch qxl vga ioport registration to
portio lists while being at it.
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Mon, 7 Nov 2011 15:33:09 +0000 (16:33 +0100)]
ac97: don't override the pci subsystem id
This patch removes the code lines which set the subsystem id for the
emulated ac97 card to 8086:0000. Due to the device id being zero the
subsystem id isn't vaild anyway. With the patch applied the sound card
gets the default qemu subsystem id (1af4:1100) instead.
[ v2: old & broken id is maintained for -M pc-$oldqemuversion ]
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Mon, 7 Nov 2011 15:33:08 +0000 (16:33 +0100)]
pc: add 1.0 machine type
This patch adds a pc-1.0 machine type.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Thu, 3 Nov 2011 15:00:22 +0000 (16:00 +0100)]
disable automatic loading of sgabios when -nographic
sgabios hasn't gotten a lot of coverage since it was not shipped. For 1.0,
let's disable the automatic loading of the option ROM in -nographic
mode. We can put it back for 1.1.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Thu, 3 Nov 2011 14:14:00 +0000 (15:14 +0100)]
add sgabios blob and submodule
The rom was not added together with the sgabios device and is
not installed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 7 Nov 2011 16:57:27 +0000 (10:57 -0600)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
Anthony Liguori [Mon, 7 Nov 2011 16:56:38 +0000 (10:56 -0600)]
Merge remote-tracking branch 'stefanha/trivial-patches' into staging
Anthony PERARD [Fri, 4 Nov 2011 15:35:11 +0000 (15:35 +0000)]
xen-platform: Fix IO port read/write functions
Somehow, the read/write functions handle an offset that does not exist anymore.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Markus Armbruster [Fri, 4 Nov 2011 10:10:01 +0000 (11:10 +0100)]
readline: Fix buffer overrun on re-add to history
readline_hist_add() moves the history entry to the end of history. It
uses memmove() to move rs->history[idx + 1..] to rs->history[idx..].
However, its size argument is off by two array elements, so it writes
one element beyond rs->history[], and reads two.
On my system, this clobbers rs->hist_entry and the hole right after
it. Since the function assigns to rs->hist_entry in time, the bug has
no ill effects for me.
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Pavel Borzenkov [Mon, 31 Oct 2011 18:53:38 +0000 (22:53 +0400)]
cmd: Fix potential memory leak
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Pavel Borzenkov [Mon, 31 Oct 2011 18:53:37 +0000 (22:53 +0400)]
cmd: Fix potential NULL pointer dereference
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Pavel Borzenkov [Mon, 31 Oct 2011 18:53:36 +0000 (22:53 +0400)]
cmd: Fix coding style in cmd.c
Before the next patches, fix coding style of the affected functions.
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Rabin Vincent [Sun, 6 Nov 2011 16:01:08 +0000 (16:01 +0000)]
arm_gic: handle banked enable bits for per-cpu interrupts
The first enable set/clear register (which controls the PPIs and SGIs)
is supposed to be banked for each processor. Currently it is just
handled globally and this prevents recent SMP Linux kernels from
booting, because CPU0 stops receiving localtimer interrupts when CPU1
disables them locally.
To fix this, allow the enable bits to be enabled per-cpu. For SPIs,
always enable/disable ALL_CPU_MASK.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Fri, 4 Nov 2011 16:21:53 +0000 (17:21 +0100)]
vvfat: reorganize computation of disk geometry
First determine FAT12/16/32, then compute geometry from that for both
FDD and HDD. For 1.44MB floppies, and 2.88MB floppies using FAT16,
change to 1 sector/cluster. The default remains 2.88MB with FAT12
and 2 sectors/cluster. Both DOS and mkdosfs by default format a 2.88MB
floppy as FAT12.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Wed, 5 Oct 2011 07:12:07 +0000 (09:12 +0200)]
vvfat: do not hardcode sector counts in error message
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Wed, 5 Oct 2011 07:12:06 +0000 (09:12 +0200)]
vvfat: unify and correct computation of sector count
The sector count is stored in the partition and hence must not include the
sectors before its start. At the same time, remove the useless special
casing for 1.44 MB floppies. This fixes fsck on VVFAT hard disks,
which otherwise tries to seek past the end of the disk.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Wed, 5 Oct 2011 07:12:05 +0000 (09:12 +0200)]
vvfat: need to use first_sectors_number to distinguish fdd/hdd
This is consistent with what "real" floppies have, so file(1)
now actually recognizes the VVFAT image as a 1.44 MB floppy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Wed, 5 Oct 2011 07:12:04 +0000 (09:12 +0200)]
vvfat: do not fail if the disk has spare sectors
If the number of "faked sectors" + the number of sectors that are
part of a cluster does not sum up to the total number of sectors,
qemu-img convert fails. Read these spare sectors as all zeros.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Wed, 5 Oct 2011 07:12:03 +0000 (09:12 +0200)]
vvfat: fix out of bounds array_get usage
When reading the address of the first free entry, you cannot
use array_get without first marking all entries as occupied.
This is visible if you change the sectors per cluster on a
floppy from 2 to 1.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Dong Xu Wang [Wed, 2 Nov 2011 08:36:21 +0000 (16:36 +0800)]
block/cloop: Use g_free instead of free
Fix mismatching allocation and deallocation: g_free should be used to pair with
g_malloc.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed_by: Ray Wang <raywang@linux.vnet.ibm.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Dong Xu Wang [Wed, 2 Nov 2011 08:36:20 +0000 (16:36 +0800)]
block/cloop: Fix coding style
Fix coding style in block/cloop.c.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed_by: Ray Wang <raywang@linux.vnet.ibm.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 28 Oct 2011 09:28:13 +0000 (05:28 -0400)]
dma: Avoid reentrancy in DMA transfer handlers
With the conversion of the block layer to coroutines, bdrv_read/write
have changed to run a nested event loop that calls qemu_bh_poll.
Consequently a scheduled BH can be called while a DMA transfer handler
runs and this means that DMA_run becomes reentrant.
Devices haven't been designed to cope with that, so instead of running a
nested transfer handler just wait for the next invocation of the BH from the
main loop.
This fixes some problems with the floppy device.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Mon, 31 Oct 2011 10:49:21 +0000 (11:49 +0100)]
qemu-io: Fix multiwrite_f error handling
Without this fix, some qiovs can be leaked if an error occurs. Also a semicolon
at the end of the command line would make the code walk beyond the end of argv.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Mon, 31 Oct 2011 10:36:32 +0000 (11:36 +0100)]
qemu-io: Handle create_iovec errors
Callers of create_iovec() didn't check for failure and continued with
uninitialised data in error cases. This patch adds checks to each call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Blue Swirl [Wed, 2 Nov 2011 20:52:23 +0000 (20:52 +0000)]
Merge branch 'xtensa' of git://jcmvbkbc.spb.ru/dumb/qemu-xtensa
* 'xtensa' of git://jcmvbkbc.spb.ru/dumb/qemu-xtensa:
xtensa_lx60: fix build date code and change memory region names
xtensa_lx60: pass kernel arguments from -append
xtensa_lx60: add FLASH support
target-xtensa: raise an exception for invalid and reserved opcodes
target-xtensa: handle cache options in the overlay tool
target-xtensa: mask out undefined bits of WINDOWSTART SR
Blue Swirl [Wed, 2 Nov 2011 20:52:13 +0000 (20:52 +0000)]
Merge branch 'tci' of git://qemu.weilnetz.de/qemu
* 'tci' of git://qemu.weilnetz.de/qemu:
tcg: Add tcg interpreter to configure / make
tcg: Add tci disassembler
tcg: Add interpreter for bytecode
tcg: Add bytecode generator for tcg interpreter
tcg: Make ARRAY_SIZE(tcg_op_defs) globally available
tcg: TCG targets may define tcg_qemu_tb_exec
Anthony Liguori [Wed, 2 Nov 2011 17:30:00 +0000 (12:30 -0500)]
Merge remote-tracking branch 'aneesh/for-upstream-8' into staging
Anthony Liguori [Wed, 2 Nov 2011 17:28:59 +0000 (12:28 -0500)]
Merge remote-tracking branch 'qemu-kvm-tmp/memory/int128' into staging
Bharata B Rao [Wed, 2 Nov 2011 08:46:08 +0000 (14:16 +0530)]
Fix X86 CPU topology in KVM mode
apic id returned to guest kernel in ebx for cpuid(function=1) depends on
CPUX86State->cpuid_apic_id which gets populated after the cpuid information
is cached in the host kernel. This results in broken CPU topology in guest.
Fix this by setting cpuid_apic_id before cpuid information is passed to
the host kernel. This is done by moving the setting of cpuid_apic_id
to cpu_x86_init() where it will work for both KVM as well as TCG modes.
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Bharata B Rao <bharata.rao@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Wed, 2 Nov 2011 11:56:14 +0000 (12:56 +0100)]
intel-hda: fix stream search
commit
ba43d28916c4f51c19bd7366089155ce81bee058 introduces a bug:
The stream-not-found case doesn't error out any more, instead the
code silently uses the first stream. Fix it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 2 Nov 2011 12:19:40 +0000 (13:19 +0100)]
virtio-blk: pass full status to the guest
When SCSI passthrough is being used by the guest with virtio-blk, the
guest is not able to detect disk failures. This is because the status
field is expected by the guest driver to include also the msg_status,
host_status and driver_status fields, but the device is only passing
down the SCSI status.
The patch fixes this, and also makes sure that the guest always sees a
CHECK_CONDITION status when there is valid sense data.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Hajnoczi [Wed, 2 Nov 2011 07:27:15 +0000 (12:57 +0530)]
hw/9pfs: use g_vasprintf() instead of rolling our own
Markus Armbruster <armbru@redhat.com> sent fixes for va_list vararg
issues in v9fs_string_alloc_printf(). It turns out the function
duplicates g_vasprintf() and can therefore be eliminated entirely.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>