OSDN Git Service
Jonathan Nieder [Sun, 31 Jan 2010 21:37:25 +0000 (15:37 -0600)]
Makefile: always remove .depend directories on 'make clean'
Even if COMPUTE_HEADER_DEPENDENCIES is not set, some .o.d files
might be lying around from previous builds when it was. This
is especially likely because using the CHECK_HEADER_DEPENDENCIES
feature requires building sometimes with COMPUTE... on and
sometimes with it off. At the end of such an exercise, to get
a blank slate, the user ought to be able to just run 'make clean'.
Make it so.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sun, 31 Jan 2010 21:23:53 +0000 (15:23 -0600)]
Makefile: tuck away generated makefile fragments in .depend
When building with COMPUTE_HEADER_DEPENDENCIES on, save
dependency information to .depend/ instead of deps/ so it does
not show up in ‘ls’ output. Otherwise, the extra directories can
be distracting.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Tue, 26 Jan 2010 15:57:15 +0000 (09:57 -0600)]
Teach Makefile to check header dependencies
Add a target to use the gcc-generated makefile snippets for
dependencies on header files to check the hard-coded dependencies.
With this patch applied, if any dependencies are missing, then
make clean
make COMPUTE_HEADER_DEPENDENCIES=YesPlease
make CHECK_HEADER_DEPENDENCIES=YesPlease
will produce an error message like the following:
CHECK fast-import.o
missing dependencies: exec_cmd.h
make: *** [fast-import.o] Error 1
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Jonathan Nieder [Tue, 26 Jan 2010 15:54:23 +0000 (09:54 -0600)]
Makefile: list standalone program object files in PROGRAM_OBJS
Because of new commands like git-remote-http, the OBJECTS list
contains fictitious objects such as remote-http.o. Thus any
out-of-tree rules that require all $(OBJECTS) to be buildable
are broken. Add a list of real program objects to avoid this
problem.
To avoid duplication of effort, calculate the command list in
the PROGRAMS variable using the expansion of PROGRAM_OBJS.
This calculation occurs at the time $(PROGRAMS) is expanded,
so later additions to PROGRAM_OBJS will be reflected in it,
provided they occur before the build rules begin on line 1489.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Jonathan Nieder [Tue, 26 Jan 2010 15:52:49 +0000 (09:52 -0600)]
Makefile: lazily compute header dependencies
Use the gcc -MMD -MP -MF options to generate dependency rules as
a byproduct when building .o files if the
COMPUTE_HEADER_DEPENDENCIES variable is defined. That variable
is left undefined by default for now.
As each object file is built, write a makefile fragment
containing its dependencies in the deps/ subdirectory of its
containing directory. The deps/ directories should be generated
if they are missing at the start of each build. So let each
object file depend on $(missing_dep_dirs), which lists only the
directories of this kind that are missing to avoid needlessly
regenerating files when the directories' timestamps change.
gcc learned the -MMD -MP -MF options in version 3.0, so most gcc
users should have them by now.
The dependencies this option computes are more specific than the
rough estimates hard-coded in the Makefile, greatly speeding up
rebuilds when only a little-used header file has changed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Jonathan Nieder [Tue, 26 Jan 2010 15:52:11 +0000 (09:52 -0600)]
Makefile: list generated object files in OBJECTS
Set the OBJECTS variable to a comprehensive list of all object
file targets. To make sure it is truly comprehensive, restrict
the scope of the %.o pattern rule to only generate objects in
this list.
Attempts to build other object files will fail loudly:
$ touch foo.c
$ make foo.o
make: *** No rule to make target `foo.o'. Stop.
providing a reminder to add the new object to the OBJECTS list.
The new variable is otherwise unused. The intent is for later
patches to take advantage of it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Jonathan Nieder [Tue, 26 Jan 2010 15:51:24 +0000 (09:51 -0600)]
Makefile: disable default implicit rules
The git makefile never uses any default implicit rules.
Unfortunately, if a prerequisite for one of the intended rules is
missing, a default rule can be used in its place:
$ make var.s
CC var.s
$ rm var.c
$ make var.o
as -o var.o var.s
Avoiding the default rules avoids this hard-to-debug behavior.
It also should speed things up a little in the normal case.
Future patches may restrict the scope of the %.o: %.c pattern.
This patch would then ensure that for targets not listed, we do
not fall back to the default rule.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Jonathan Nieder [Tue, 26 Jan 2010 15:49:33 +0000 (09:49 -0600)]
Makefile: rearrange dependency rules
Put rules listing dependencies of compiled objects (.o files) on
header files (.h files) in one place, to make them easier to
compare and modify all at once.
Add a GIT_OBJS variable listing objects that depend on LIB_H,
for similar reasons.
No change in build-time behavior intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Jonathan Nieder [Tue, 26 Jan 2010 15:47:25 +0000 (09:47 -0600)]
Makefile: transport.o depends on branch.h now
Since commit
e9fcd1e2 (Add push --set-upstream, 2010-01-16),
transport.c uses branch.h.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Jonathan Nieder [Tue, 26 Jan 2010 16:08:44 +0000 (10:08 -0600)]
Merge branch 'master' of git://repo.or.cz/alt-git into jn/autodep
* 'master' of git://repo.or.cz/alt-git: (384 commits)
am: fix patch format detection for Thunderbird "Save As" emails
t0022: replace non-portable literal CR
tests: consolidate CR removal/addition functions
commit-tree: remove unused #define
t5541-http-push: make grep expression check for one line only
rebase: replace antiquated sed invocation
Add test-run-command to .gitignore
git_connect: use use_shell instead of explicit "sh", "-c"
gitweb.js: Workaround for IE8 bug
Make test numbers unique
Windows: Remove dependency on pthreadGC2.dll
Documentation: move away misplaced 'push --upstream' description
Documentation: add missing :: in config.txt
pull: re-fix command line generation
Documentation: merge: use MERGE_HEAD to refer to the remote branch
Documentation: simplify How Merge Works
Documentation: merge: add a section about fast-forward
Documentation: emphasize when git merge terminates early
Documentation: merge: add an overview
Documentation: merge: move merge strategy list to end
...
Conflicts:
Makefile
Jonathan Nieder [Tue, 26 Jan 2010 15:46:59 +0000 (09:46 -0600)]
Makefile: drop dependency on $(wildcard */*.h)
The files this pulls in are already pulled in by other dependency
rules (some recently added).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Jonathan Nieder [Tue, 26 Jan 2010 15:46:37 +0000 (09:46 -0600)]
Makefile: clean up http-walker.o dependency rules
http-walker.o depends on http.h twice: once in the rule listing
files that use http.h, and again in the rule explaining how to
build it. Messy.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Jonathan Nieder [Tue, 26 Jan 2010 15:46:16 +0000 (09:46 -0600)]
Makefile: remove wt-status.h from LIB_H
A list of the few translation units using this header is
half-populated already. Including the dependency on this header
twice (once explicitly, once through LIB_H) makes it difficult to
figure out where future headers should be added to the Makefile.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Jonathan Nieder [Tue, 26 Jan 2010 15:45:54 +0000 (09:45 -0600)]
Makefile: make sure test helpers are rebuilt when headers change
It is not worth the bother to maintain an up-to-date list of
which headers each test helper uses, so depend on $(LIB_H) to
catch them all.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Jonathan Nieder [Tue, 26 Jan 2010 15:44:47 +0000 (09:44 -0600)]
Makefile: add missing header file dependencies
LIB_H is missing exec_cmd.h and color.h. cache.h includes
SHA1_HEADER, and thus so does almost everything else, so add that
to LIB_H, too. xdiff-interface.h is not included by any header
files, but so many source files use xdiff that it is simplest to
include it in LIB_H, too.
xdiff-interface.o uses the xdiff library heavily; let it depend
on all xdiff headers to avoid needing to keep track of which
headers it uses.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Stephen Boyd [Tue, 26 Jan 2010 00:33:59 +0000 (16:33 -0800)]
am: fix patch format detection for Thunderbird "Save As" emails
The patch detection wants to inspect all the headers of a rfc2822 message
and ensure that they look like header fields. The headers are always
separated from the message body with a blank line. When Thunderbird saves
the message the blank line separating the headers from the body includes a
CR. The patch detection is failing because a CRLF doesn't match /^$/. Fix
this by allowing a CR to exist on the separating line.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephen Boyd [Tue, 26 Jan 2010 00:33:58 +0000 (16:33 -0800)]
t0022: replace non-portable literal CR
We shouldn't have literal CR's in tests as they aren't portable.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephen Boyd [Tue, 26 Jan 2010 00:33:57 +0000 (16:33 -0800)]
tests: consolidate CR removal/addition functions
append_cr(), remove_cr(), q_to_nul() and q_to_cr() are defined in multiple
tests. Consolidate them into test-lib.sh so we can stop redefining them.
The use of remove_cr() in t0020 to test for a CR is replaced with a new
function has_cr() to accurately reflect what is intended (the output of
remove_cr() was being thrown away).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephen Boyd [Mon, 25 Jan 2010 07:05:43 +0000 (23:05 -0800)]
commit-tree: remove unused #define
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tay Ray Chuan [Mon, 25 Jan 2010 07:42:23 +0000 (15:42 +0800)]
t5541-http-push: make grep expression check for one line only
Don't feed a multiple-line pattern to grep and expect the them to match
with lines in order.
Simplify the grep expressions in the non-fast-forward tests to check
only for the first line of the non-fast-forward warning - having that
line should be enough assurance that the full warning is printed.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephen Boyd [Mon, 25 Jan 2010 07:06:31 +0000 (23:06 -0800)]
rebase: replace antiquated sed invocation
Use the modern form of printing a commit subject instead of piping
the output of rev-list to sed.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alejandro Riveira Fernández [Mon, 25 Jan 2010 15:56:21 +0000 (16:56 +0100)]
Add test-run-command to .gitignore
Add test-run-command to .gitignore so it does not pollute
git status output.
Signed-off-by: Alejandro Riveira Fernández <ariveira@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Mon, 25 Jan 2010 12:32:44 +0000 (13:32 +0100)]
git_connect: use use_shell instead of explicit "sh", "-c"
This is a followup to
ac0ba18 (run-command: convert simple callsites to
use_shell, 2009-12-30), for consistency.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sun, 24 Jan 2010 18:05:23 +0000 (19:05 +0100)]
gitweb.js: Workaround for IE8 bug
In Internet Explorer 8 (IE8) the 'blame_incremental' view, which uses
JavaScript to generate blame info using AJAX, sometimes hang at the
beginning (at 0%) of blaming, e.g. for larger files with long history
like git's own gitweb/gitweb.perl.
The error shown by JavaScript console is "Unspecified error" at char:2
of the following line in gitweb/gitweb.js:
if (xhr.readyState === 3 && xhr.status !== 200) {
Debugging it using IE8 JScript debuger shown that the error occurs
when trying to access xhr.status (xhr is XMLHttpRequest object).
Watch for xhr object shows 'Unspecified error.' as "value" of
xhr.status, and trying to access xhr.status from console throws error.
This bug is some intermittent bug, depending on XMLHttpRequest timing,
as it doesn't occur in all cases. It is probably caused by the fact
that handleResponse is called from timer (pollTimer), to work around
the fact that some browsers call onreadystatechange handler only once
for each state change, and not like required for 'blame_incremental'
as soon as new data is available from server. It looks like xhr
object is not properly initialized; still it is a bug to throw an
error when accessing xhr.status (and not use 'null' or 'undefined' as
value).
Work around this bug in IE8 by using try-catch block when accessing
xhr.status.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 25 Jan 2010 01:35:58 +0000 (17:35 -0800)]
Merge branch 'jc/fix-tree-walk'
* jc/fix-tree-walk:
read-tree --debug-unpack
unpack-trees.c: look ahead in the index
unpack-trees.c: prepare for looking ahead in the index
Aggressive three-way merge: fix D/F case
traverse_trees(): handle D/F conflict case sanely
more D/F conflict tests
tests: move convenience regexp to match object names to test-lib.sh
Conflicts:
builtin-read-tree.c
unpack-trees.c
unpack-trees.h
Johannes Sixt [Sun, 24 Jan 2010 21:40:20 +0000 (22:40 +0100)]
Make test numbers unique
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 24 Jan 2010 19:18:05 +0000 (11:18 -0800)]
Merge branch 'maint'
* maint:
git-gui: work from the .git dir
git-gui: Fix applying a line when all following lines are deletions
git-gui: Correct file_states when unstaging partly staged entry
git-gui: Fix gitk for branch whose name matches local file
git-gui: Keep repo_config(gui.recentrepos) and .gitconfig in sync
git-gui: handle really long error messages in updateindex.
git-gui: Add hotkeys for "Unstage from commit" and "Revert changes"
git-gui: Makefile: consolidate .FORCE-* targets
Junio C Hamano [Sun, 24 Jan 2010 19:16:26 +0000 (11:16 -0800)]
Merge branch 'maint' of git://git.spearce.org/git-gui into maint
* 'maint' of git://git.spearce.org/git-gui:
git-gui: work from the .git dir
git-gui: Fix applying a line when all following lines are deletions
git-gui: Correct file_states when unstaging partly staged entry
git-gui: Fix gitk for branch whose name matches local file
git-gui: Keep repo_config(gui.recentrepos) and .gitconfig in sync
git-gui: handle really long error messages in updateindex.
git-gui: Add hotkeys for "Unstage from commit" and "Revert changes"
git-gui: Makefile: consolidate .FORCE-* targets
Michael Lukashov [Sun, 24 Jan 2010 10:10:30 +0000 (10:10 +0000)]
Windows: Remove dependency on pthreadGC2.dll
Commit
44626dc7 (MSVC: Windows-native implementation for subset
of threads API, 2010-01-15) introduces builtin replacement of
pthreadGC2.dll functionality, thus we can completely drop
dependency on this dll.
Signed-off-by: Michael Lukashov <michael.lukashov@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Sat, 23 Jan 2010 22:18:23 +0000 (23:18 +0100)]
Documentation: move away misplaced 'push --upstream' description
e9fcd1e (Add push --set-upstream, 2010-01-16) inadvertently patched
the description of --upstream in the middle of that of --repo.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Sat, 23 Jan 2010 22:13:17 +0000 (23:13 +0100)]
Documentation: add missing :: in config.txt
bed575e (commit: support commit.status, --status, and --no-status,
2009-12-07) forgot to add the :: that sets off an item from the
paragraph that explains it, breaking the layout.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 24 Jan 2010 18:58:57 +0000 (10:58 -0800)]
Merge branch 'doc-style/for-next' of git://repo.or.cz/git/trast
* 'doc-style/for-next' of git://repo.or.cz/git/trast:
Documentation: merge: use MERGE_HEAD to refer to the remote branch
Documentation: simplify How Merge Works
Documentation: merge: add a section about fast-forward
Documentation: emphasize when git merge terminates early
Documentation: merge: add an overview
Documentation: merge: move merge strategy list to end
Documentation: suggest `reset --merge` in How Merge Works section
Documentation: merge: move configuration section to end
Documentation: emphasise 'git shortlog' in its synopsis
Documentation: show-files is now called git-ls-files
Documentation: tiny git config manual tweaks
Documentation: git gc packs refs by default now
Conflicts:
Documentation/config.txt
Junio C Hamano [Sun, 24 Jan 2010 18:11:27 +0000 (10:11 -0800)]
pull: re-fix command line generation
14e5d40 (pull: Fix parsing of -X<option>, 2010-01-17) forgot that
merge_name needs to stay as a single non-interpolated string.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sat, 23 Jan 2010 22:48:40 +0000 (16:48 -0600)]
Documentation: merge: use MERGE_HEAD to refer to the remote branch
commit
57bddb11 (Documentation/git-merge: reword references to
"remote" and "pull", 2010-01-07) fixed the manual to drop the
assumption that the other branch being merged is from a remote
repository. Unfortunately, in a few places, to do so it
introduced the antecedentless phrase "their versions". Worse, in
passages like the following, 'they' is playing two roles.
| highlighting changes from both the HEAD and their versions.
|
| * Look at the diffs on their own. 'git log --merge -p <path>'
Using HEAD and MERGE_HEAD nicely assigns terminology to "our" and
"their" sides. It also provides the reader with practice using
names that git will recognize on the command line.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Jonathan Nieder [Sat, 23 Jan 2010 09:48:42 +0000 (03:48 -0600)]
Documentation: simplify How Merge Works
The user most likely does not care about the exact order of
operations because he cannot see it happening anyway. Instead,
try to explain what it means to merge two commits into a single
tree.
While at it:
- Change the heading to TRUE MERGE. The entire manual page is
about how merges work.
- Document MERGE_HEAD. It is a useful feature, since it makes
the parents of the intended merge commit easier to refer to.
- Do not assume commits named on the 'git merge' command line come
from another repository. For simplicity, the discussion of
conflicts still does assume that there is only one and it is a
branch head.
- Do not start list items with `code`. Otherwise, a toolchain bug
produces a line break in the generated nroff, resulting in odd
extra space.
Suggested-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Jonathan Nieder [Sat, 23 Jan 2010 09:45:33 +0000 (03:45 -0600)]
Documentation: merge: add a section about fast-forward
Novices sometimes find the behavior of 'git merge' in the
fast-forward case surprising. Describe it thoroughly.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Jonathan Nieder [Sat, 23 Jan 2010 09:44:17 +0000 (03:44 -0600)]
Documentation: emphasize when git merge terminates early
A merge-based operation in git can fail in two ways: one that
stops before touching anything, or one that goes ahead and
results in conflicts.
As the 'git merge' manual explains:
| A merge is always between the current `HEAD` and one or more
| commits (usually, branch head or tag), and the index file must
| match the tree of `HEAD` commit (i.e. the contents of the last commit)
| when it starts out.
Unfortunately, the placement of this sentence makes it easy to
skip over, and its formulation leaves the important point, that
any other attempted merge will be gracefully aborted, unspoken.
So give this point its own section and expand upon it.
Probably this could be simplified somewhat: after all, a change
registered in the index is just a special kind of local
uncommited change, so the second added paragraph is only a
special case of the first. It seemed more helpful to be explicit
here.
Inspired by <http://gitster.livejournal.com/25801.html>.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Jonathan Nieder [Sat, 23 Jan 2010 09:42:46 +0000 (03:42 -0600)]
Documentation: merge: add an overview
The reader unfamiliar with the concepts of branching and merging
would have been completely lost. Try to help him with a diagram.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Jonathan Nieder [Sat, 23 Jan 2010 09:33:37 +0000 (03:33 -0600)]
Documentation: merge: move merge strategy list to end
So the section layout changes as follows:
NAME
SYNOPSIS
DESCRIPTION
OPTIONS
-MERGE STRATEGIES
HOW MERGE WORKS
HOW CONFLICTS ARE PRESENTED
HOW TO RESOLVE CONFLICTS
EXAMPLES
+MERGE STRATEGIES
CONFIGURATION
SEE ALSO
AUTHOR
DOCUMENTATION
GIT
NOTES
The first-time user will care more about conflicts than about
strategies other than 'recursive'.
One of the examples uses -s ours, but I do not think this hinders
readability.
Suggested-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Jonathan Nieder [Sat, 23 Jan 2010 09:31:19 +0000 (03:31 -0600)]
Documentation: suggest `reset --merge` in How Merge Works section
The 'merge' manual suggests 'reset' to cancel a merge at the end
of the Merge Strategies list. It is more logical to explain this
right before explaining how merge conflicts work, so the daunted
reader can have a way out when he or she needs it most.
While at it, make the advice more dependable and self-contained
by providing the --merge option.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Jonathan Nieder [Sat, 23 Jan 2010 09:26:57 +0000 (03:26 -0600)]
Documentation: merge: move configuration section to end
Configuration and environment variables belong to the back matter
of a manual page.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Junio C Hamano [Fri, 22 Jan 2010 21:09:24 +0000 (13:09 -0800)]
rebase -i: Export GIT_AUTHOR_* variables explicitly
There is no point doing self-assignments of these variables. Instead,
just export them to the environment, but do so in a sub-shell, because
VAR1=VAL1 VAR2=VAL2 ... command arg1 arg2...
does not mark the variables exported if command that is run
is a shell function, according to POSIX.1.
The callers of do_with_author do not rely on seeing the effect of any
shell variable assignments that may happen inside what was called through
this shell function (currently "output" is the only one), so running it in
the subshell doesn't have an adverse semantic effect.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giuseppe Bilotta [Sat, 23 Jan 2010 10:03:36 +0000 (11:03 +0100)]
git-gui: work from the .git dir
When git-gui is run from a .git dir, _gitdir would be set to "." by
rev-parse, something that confuses the worktree detection.
Fix by expanding the value of _gitdir to pwd in this special case.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff Epler [Tue, 8 Dec 2009 00:22:42 +0000 (18:22 -0600)]
git-gui: Fix applying a line when all following lines are deletions
If a diff looked like:
@@
context
-del1
-del2
and you wanted to stage the deletion 'del1', the generated patch
wouldn't apply because it was missing the line 'del2' converted to
context, but this line was counted in the @@-line
Signed-off-by: Jeff Epler <jepler@unpythonic.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jens Lehmann [Mon, 7 Dec 2009 20:35:59 +0000 (21:35 +0100)]
git-gui: Correct file_states when unstaging partly staged entry
When unstaging a partly staged file or submodule, the file_states
list was not updated properly (unless unstaged linewise). Its
index_info part did not contain the former head_info as it should
have but kept its old value.
This seems not to have had any bad effects but diminishes the value
of the file_states list for future enhancements.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Peter Krefting [Thu, 21 Jan 2010 12:15:17 +0000 (13:15 +0100)]
git-gui: Fix gitk for branch whose name matches local file
When trying to run gitk on a branch name whose name matches a local
file, it will toss an error saying that the name is ambiguous. Adding
a pair of dashes will make gitk parse the options to the left of
it as branch names. Since wish eats the first pair of dashes we
throw at it, we need to add a second one to ensure they get through.
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Christopher Beelby [Sat, 23 Jan 2010 22:37:17 +0000 (14:37 -0800)]
git-gui: Keep repo_config(gui.recentrepos) and .gitconfig in sync
When the number of recent repo's gets to ten there can be a
situation where an item is removed from the .gitconfig file via
a call to git config --unset, but the internal representation of
that file (repo_config(gui.recentrepo)) is not updated. Then a
subsequent attempt to remove an item from the list fails because
git-gui attempts to call --unset on a value that has already
been removed. This leads to duplicates in the .gitconfig file,
which then also cause errors if the git-gui tries to --unset them
(rather than using --unset-all. --unset-all is not used because it
is not expected that duplicates should ever be allowed to exist.)
When loading the list of recent repositories (proc _get_recentrepos)
if a repo in the list is not considered a valid git reposoitory
then we should go ahead and remove it so it doesn't take up a slot
in the list (since we limit to 10 items). This will prevent a bunch
of invalid entries in the list (which are not shown) from making
valid entries dissapear off the list even when there are less than
ten valid entries.
See: http://code.google.com/p/msysgit/issues/detail?id=362
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Pat Thoyts [Sun, 20 Dec 2009 02:02:03 +0000 (02:02 +0000)]
git-gui: handle really long error messages in updateindex.
As reported to msysGit (bug #340) it is possible to get some very
long error messages when updating the index. The use of a label to
display this prevents scrolling the output. This patch replaces the
label with a scrollable text widget configured to look like a label.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Christian Couder [Sat, 23 Jan 2010 07:26:26 +0000 (08:26 +0100)]
Documentation: rev-list: fix synopsys for --tags and and --remotes
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 23 Jan 2010 18:42:47 +0000 (10:42 -0800)]
Merge git://git.bogomips.org/git-svn
* git://git.bogomips.org/git-svn:
git-svn: allow subset of branches/tags to be specified in glob spec
git-svn: allow UUID to be manually remapped via rewriteUUID
git-svn: update svn mergeinfo test suite
git-svn: document --username/commit-url for branch/tag
git-svn: add --username/commit-url options for branch/tag
git-svn: respect commiturl option for branch/tag
git-svn: fix mismatched src/dst errors for branch/tag
git-svn: handle merge-base failures
git-svn: ignore changeless commits when checking for a cherry-pick
Jay Soffian [Sat, 23 Jan 2010 08:30:01 +0000 (03:30 -0500)]
git-svn: allow subset of branches/tags to be specified in glob spec
For very large projects it is useful to be able to clone a subset of the
upstream SVN repo's branches. Allow for this by letting the left-side of
the branches and tags glob specs contain a brace-delineated comma-separated
list of names. e.g.:
branches = branches/{red,green}/src:refs/remotes/branches/*
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Jay Soffian [Sat, 23 Jan 2010 08:30:00 +0000 (03:30 -0500)]
git-svn: allow UUID to be manually remapped via rewriteUUID
In certain situations it may be necessary to manually remap an svn
repostitory UUID. For example:
o--- [git-svn clone]
/
[origin svn repo]
\
o--- [svnsync clone]
Imagine that only "git-svn clone" and "svnsync clone" are made available
to external users. Furthur, "git-svn clone" contains only trunk, and for
reasons unknown, "svnsync clone" is missing the revision properties that
normally provide the origin svn repo's UUID.
A git user who has cloned the "git-svn clone" repo now wishes to use
git-svn to pull in the missing branches from the "synsync clone" repo.
In order for git-svn to get the history correct for those branches,
it needs to know the origin svn repo's UUID. Hence rewriteUUID.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Andrew Myrick [Thu, 21 Jan 2010 21:55:48 +0000 (21:55 +0000)]
git-svn: update svn mergeinfo test suite
Add a partial branch (e.g., a branch from a project subdirectory) to the
git-svn mergeinfo test repository.
Add a tag and a branch from that tag to the git-svn mergeinfo test repository.
Update the test script to expect a known failure in git-svn exposed by these
additions where merge info for partial branches is not preserved.
Signed-off-by: Andrew Myrick <amyrick@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Igor Mironov [Mon, 11 Jan 2010 16:22:27 +0000 (03:22 +1100)]
git-svn: document --username/commit-url for branch/tag
[ew: shortened subject]
Signed-off-by: Igor Mironov <igor.a.mironov@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Igor Mironov [Mon, 11 Jan 2010 16:21:51 +0000 (03:21 +1100)]
git-svn: add --username/commit-url options for branch/tag
Add ability to specify on the command line the username to perform the
operation as and the writable URL of the repository to perform it on.
[ew: shortened subject]
Signed-off-by: Igor Mironov <igor.a.mironov@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Igor Mironov [Mon, 11 Jan 2010 16:21:23 +0000 (03:21 +1100)]
git-svn: respect commiturl option for branch/tag
When constructing a destination URL, use the property 'commiturl' if it
is specified in the configuration file; otherwise take 'url' as usual.
This accommodates the scenario where a user only wants to involve the
writable repository in operations performing a commit and defaults
everything else to a read-only URL.
[ew: shortened subject]
Signed-off-by: Igor Mironov <igor.a.mironov@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Igor Mironov [Mon, 11 Jan 2010 16:20:43 +0000 (03:20 +1100)]
git-svn: fix mismatched src/dst errors for branch/tag
This fixes the following issue:
$ git svn branch -t --username=svnuser \
--commit-url=https://myproj.domain.com/svn mytag
Copying http://myproj.domain.com/svn/trunk at r26 to
https://myproj.domain.com/svn/tags/mytag...
Trying to use an unsupported feature: Source and dest appear not to be
in the same repository (src: 'http://myproj.domain.com/svn/trunk';
dst: 'https://myproj.domain.com/svn/tags/mytag')
[ew: shortened subject]
Signed-off-by: Igor Mironov <igor.a.mironov@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Andrew Myrick [Thu, 7 Jan 2010 00:25:22 +0000 (16:25 -0800)]
git-svn: handle merge-base failures
Change git-svn to warn and continue when merge-base fails while processing svn
merge tickets.
merge-base can fail when a partial branch is created and merged back to trunk
in svn, because it cannot find a common ancestor between the partial branch and
trunk.
Signed-off-by: Andrew Myrick <amyrick@apple.com>
Acked-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Andrew Myrick [Thu, 7 Jan 2010 00:25:21 +0000 (16:25 -0800)]
git-svn: ignore changeless commits when checking for a cherry-pick
Update git-svn to ignore commits that do not change the tree when it is
deciding if an svn merge ticket represents a real branch merge or just a
cherry-pick.
Consider the following integration model in the svn repository:
F---G branch1
/ \
D tag1 \ E tag2
/ \ /
A---B C trunk
branch1 is merged to trunk in commit C.
With this patch, git-svn will correctly identify branch1 as a proper merge
parent, instead of incorrectly ignoring it as a cherry-pick.
Signed-off-by: Andrew Myrick <amyrick@apple.com>
Acked-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
David Aguilar [Sat, 23 Jan 2010 06:03:36 +0000 (22:03 -0800)]
t7800-difftool.sh: Test mergetool.prompt fallback
4cacc621 made difftool fall back to mergetool.prompt
when difftool.prompt is unconfigured. This adds a test.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ramsay Jones [Wed, 20 Jan 2010 19:45:12 +0000 (19:45 +0000)]
msvc: Add a definition of NORETURN compatible with msvc compiler
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 23 Jan 2010 00:34:50 +0000 (16:34 -0800)]
Update draft release notes to 1.7.0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ramsay Jones [Wed, 20 Jan 2010 19:34:14 +0000 (19:34 +0000)]
msvc: Fix a compiler warning due to an incorrect pointer cast
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ramsay Jones [Wed, 20 Jan 2010 19:25:51 +0000 (19:25 +0000)]
msvc: Fix an "unrecognized option" linker warning
Having recently added support for building git-imap-send on
Windows, we now link against OpenSSL libraries, and the linker
issues the following warning:
warning LNK4044: unrecognized option '/lssl'; ignored
In order to suppress the warning, we change the msvc linker
script to translate an '-lssl' parameter to the ssleay32.lib
library.
Note that the linker script was already including ssleay32.lib
(along with libeay32.lib) as part of the translation of the
'-lcrypto' library parameter. However, libeay32.dll does not
depend on ssleay32.dll and can be used stand-alone, so we remove
ssleay32.lib from the '-lcrypto' translation.
The dependence of ssleay32.dll on libeay32.dll is represented in
the Makefile by the NEEDS_CRYPTO_WITH_SSL build variable.
Also, add the corresponding change to the buildsystem generator.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 23 Jan 2010 00:12:41 +0000 (16:12 -0800)]
Merge branch 'maint'
* maint:
ignore duplicated slashes in make_relative_path()
Junio C Hamano [Sat, 23 Jan 2010 00:08:19 +0000 (16:08 -0800)]
Merge branch 'jc/branch-d'
* jc/branch-d:
branch -d: base the "already-merged" safety on the branch it merges with
Junio C Hamano [Sat, 23 Jan 2010 00:08:16 +0000 (16:08 -0800)]
Merge branch 'il/rev-glob'
* il/rev-glob:
Documentation: improve description of --glob=pattern and friends
rev-parse --branches/--tags/--remotes=pattern
rev-parse --glob
Junio C Hamano [Sat, 23 Jan 2010 00:08:13 +0000 (16:08 -0800)]
Merge branch 'js/refer-upstream'
* js/refer-upstream:
Teach @{upstream} syntax to strbuf_branchanme()
t1506: more test for @{upstream} syntax
Introduce <branch>@{upstream} notation
Junio C Hamano [Sat, 23 Jan 2010 00:08:10 +0000 (16:08 -0800)]
Merge branch 'jl/submodule-diff'
* jl/submodule-diff:
Performance optimization for detection of modified submodules
git status: Show uncommitted submodule changes too when enabled
Teach diff that modified submodule directory is dirty
Show submodules as modified when they contain a dirty work tree
Junio C Hamano [Sat, 23 Jan 2010 00:08:07 +0000 (16:08 -0800)]
Merge branch 'il/remote-updates'
* il/remote-updates:
Add git remote set-url
Junio C Hamano [Sat, 23 Jan 2010 00:08:05 +0000 (16:08 -0800)]
Merge branch 'il/branch-set-upstream'
* il/branch-set-upstream:
branch: warn and refuse to set a branch as a tracking branch of itself.
Add branch --set-upstream
Junio C Hamano [Sat, 23 Jan 2010 00:08:01 +0000 (16:08 -0800)]
Merge branch 'jc/maint-limit-note-output'
* jc/maint-limit-note-output:
Fix "log --oneline" not to show notes
Fix "log" family not to be too agressive about showing notes
Junio C Hamano [Sat, 23 Jan 2010 00:07:18 +0000 (16:07 -0800)]
Merge branch 'nd/ls-files-sparse-fix'
* nd/ls-files-sparse-fix:
Fix memory corruption when .gitignore does not end by \n
Sebastian Schuberth [Fri, 22 Jan 2010 16:36:36 +0000 (17:36 +0100)]
Make difftool.prompt fall back to mergetool.prompt
The documentation states that "git-difftool falls back to git-mergetool
config variables when the difftool equivalents have not been defined".
Until now, this was not the case for "difftool.prompt".
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ramsay Jones [Fri, 22 Jan 2010 20:00:47 +0000 (20:00 +0000)]
engine.pl: Fix a recent breakage of the buildsystem generator
Commit
ade2ca0c (Do not try to remove directories when removing
old links, 2009-10-27) added an expression to a 'test' using an
'-o' or connective. This resulted in the buildsystem generator
mistaking a conditional 'rm' for a linker command. In order to
fix the breakage, we filter out all 'test' commands before then
attempting to identify the commands of interest.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 22 Jan 2010 03:05:19 +0000 (19:05 -0800)]
ignore duplicated slashes in make_relative_path()
The function takes two paths, an early part of abs is supposed to match
base; otherwise abs is not a path under base and the function returns the
full path of abs. The caller can easily confuse the implementation by
giving duplicated and needless slashes in these path arguments.
Credit for test script, motivation and initial patch goes to Thomas Rast.
A follow-up fix (squashed) is by Hannes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 22 Jan 2010 22:17:06 +0000 (14:17 -0800)]
git-mv: fix moving more than one source to a single destination
The code used as if return value from basename(3) were stable, but
often the function is implemented to return a pointer to a static
storage internal to it.
Because basename(3) is also allowed to modify its input parameter in
place, casting constness away from the strings we obtained from the
caller and giving them to basename is a no-no.
Reported, and initial fix and test supplied by David Rydh.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty [Fri, 22 Jan 2010 09:22:30 +0000 (10:22 +0100)]
rebase -i: Enclose sed command substitution in quotes
Reported by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael Haggerty [Fri, 22 Jan 2010 09:22:29 +0000 (10:22 +0100)]
rebase -i: Avoid non-portable "test X -a Y"
Reported by: Eric Blake <ebb9@byu.net>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Fri, 22 Jan 2010 15:55:19 +0000 (07:55 -0800)]
make "index-pack" a built-in
This required some fairly trivial packfile function 'const' cleanup,
since the builtin commands get a const char *argv[] array.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Fri, 22 Jan 2010 15:42:14 +0000 (07:42 -0800)]
make "git pack-redundant" a built-in
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Fri, 22 Jan 2010 15:38:03 +0000 (07:38 -0800)]
make "git unpack-file" a built-in
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Fri, 22 Jan 2010 15:34:44 +0000 (07:34 -0800)]
make "mktag" a built-in
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Fri, 22 Jan 2010 15:29:21 +0000 (07:29 -0800)]
make "merge-index" a built-in
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Fri, 22 Jan 2010 11:47:59 +0000 (12:47 +0100)]
merge-tree: remove unnecessary call of git_extract_argv0_path
This call should have been removed when the utility was made a builtin by
907a7cb.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Fri, 22 Jan 2010 04:31:25 +0000 (20:31 -0800)]
make "git patch-id" a built-in
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Fri, 22 Jan 2010 04:21:55 +0000 (20:21 -0800)]
make "git var" a built-in
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nicolas Pitre [Fri, 22 Jan 2010 05:55:15 +0000 (00:55 -0500)]
fix git-p4 editor invocation
The strip() is required to remove the trailing newline character,
as already done elsewhere.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Fri, 22 Jan 2010 00:21:38 +0000 (01:21 +0100)]
Documentation: improve description of --glob=pattern and friends
Consolidate the descriptions of --branches, --tags and --remotes a
bit, to make it less repetitive. Improve the grammar a bit, and spell
out the meaning of the 'append /*' rule.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 22 Jan 2010 04:08:31 +0000 (20:08 -0800)]
Merge branch 'maint'
* maint:
merge-recursive: do not return NULL only to cause segfault
retry request without query when info/refs?query fails
Linus Torvalds [Fri, 22 Jan 2010 03:50:11 +0000 (19:50 -0800)]
make "git hash-object" a built-in
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Fri, 22 Jan 2010 02:25:20 +0000 (18:25 -0800)]
make "git merge-tree" a built-in
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Thu, 21 Jan 2010 23:25:19 +0000 (15:25 -0800)]
slim down "git show-index"
As the documentation says, this is primarily for debugging, and
in the longer term we should rename it to test-show-index or something.
In the meantime, just avoid xmalloc (which slurps in the rest of git), and
separating out the trivial hex functions into "hex.o".
This results in
[torvalds@nehalem git]$ size git-show-index
text data bss dec hex filename
222818 2276 112688 337782 52776 git-show-index (before)
5696 624 1264 7584 1da0 git-show-index (after)
which is a whole lot better.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Thu, 21 Jan 2010 19:37:38 +0000 (11:37 -0800)]
Remove diff machinery dependency from read-cache
Exal Sibeaz pointed out that some git files are way too big, and that
add_files_to_cache() brings in all the diff machinery to any git binary
that needs the basic git SHA1 object operations from read-cache.c. Which
is pretty much all of them.
It's doubly silly, since add_files_to_cache() is only used by builtin
programs (add, checkout and commit), so it's fairly easily fixed by just
moving the thing to builtin-add.c, and avoiding the dependency entirely.
I initially argued to Exal that it would probably be best to try to depend
on smart compilers and linkers, but after spending some time trying to
make -ffunction-sections work and giving up, I think Exal was right, and
the fix is to just do some trivial cleanups like this.
This trivial cleanup results in pretty stunning file size differences.
The diff machinery really is mostly used by just the builtin programs, and
you have things like these trivial before-and-after numbers:
-rwxr-xr-x 1 torvalds torvalds
1727420 2010-01-21 10:53 git-hash-object
-rwxrwxr-x 1 torvalds torvalds 940265 2010-01-21 11:16 git-hash-object
Now, I'm not saying that 940kB is good either, but that's mostly all the
debug information - you can see the real code with 'size':
text data bss dec hex filename
418675 3920 127408 550003 86473 git-hash-object (before)
230650 2288 111728 344666 5425a git-hash-object (after)
ie we have a nice 24% size reduction from this trivial cleanup.
It's not just that one file either. I get:
[torvalds@nehalem git]$ du -s /home/torvalds/libexec/git-core
45640 /home/torvalds/libexec/git-core (before)
33508 /home/torvalds/libexec/git-core (after)
so we're talking 12MB of diskspace here.
(Of course, stripping all the binaries brings the 33MB down to 9MB, so the
whole debug information thing is still the bulk of it all, but that's a
separate issue entirely)
Now, I'm sure there are other things we should do, and changing our
compiler flags from -O2 to -Os would bring the text size down by an
additional almost 20%, but this thing Exal pointed out seems to be some
good low-hanging fruit.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 22 Jan 2010 00:38:56 +0000 (16:38 -0800)]
merge-recursive: do not return NULL only to cause segfault
merge-recursive calls write_tree_from_memory() to come up with a virtual
tree, with possible conflict markers inside the blob contents, while
merging multiple common ancestors down. It is a bug to call the function
with unmerged entries in the index, even if the merge to come up with the
common ancestor resulted in conflicts. Otherwise the result won't be
expressible as a tree object.
We _might_ want to suggest the user to set GIT_MERGE_VERBOSITY to 5 and
re-run the merge in the message. At least we will know which part of
process_renames() or process_entry() functions is not correctly handling
the unmerged paths, and it might help us diagnosing the issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Horst H. von Brand [Thu, 21 Jan 2010 20:34:25 +0000 (17:34 -0300)]
git-rebase.txt: Fix spelling
Signed-off-by: Horst H. von Brand <vonbrand@inf.utfsm.cl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tay Ray Chuan [Thu, 21 Jan 2010 14:41:00 +0000 (22:41 +0800)]
retry request without query when info/refs?query fails
When "info/refs" is a static file and not behind a CGI handler, some
servers may not handle a GET request for it with a query string
appended (eg. "?foo=bar") properly.
If such a request fails, retry it sans the query string. In addition,
ensure that the "smart" http protocol is not used (a service has to be
specified with "?service=<service name>" to be conformant).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reported-and-tested-by: Yaroslav Halchenko <debian@onerussian.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 21 Jan 2010 22:57:41 +0000 (14:57 -0800)]
Fix "log --oneline" not to show notes
This option should be treated pretty much the same as --format="%h %s".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Thu, 21 Jan 2010 08:23:48 +0000 (09:23 +0100)]
Make 'rerere forget' work from a subdirectory.
It forgot to apply the prefix to the paths given on the command line.
[jc: added test]
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Thu, 21 Jan 2010 07:57:03 +0000 (08:57 +0100)]
Make test case numbers unique
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>