OSDN Git Service
Linus Torvalds [Sun, 4 Apr 2010 19:12:31 +0000 (12:12 -0700)]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: set_cpus_allowed_ptr(): Don't use rq->migration_thread after unlock
sched: Fix proc_sched_set_task()
Linus Torvalds [Sun, 4 Apr 2010 19:12:19 +0000 (12:12 -0700)]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
ring-buffer: Add missing unlock
tracing: Fix lockdep warning in global_clock()
KAMEZAWA Hiroyuki [Fri, 2 Apr 2010 00:11:29 +0000 (09:11 +0900)]
proc: pagemap: Hold mmap_sem during page walk
In initial design, walk_page_range() was designed just for walking page
table and it didn't require mmap_sem. Now, find_vma() etc.. are used
in walk_page_range() and we need mmap_sem around it.
This patch adds mmap_sem around walk_page_range().
Because /proc/<pid>/pagemap's callback routine use put_user(), we have
to get rid of it to do sane fix.
Changelog: 2010/Apr/2
- fixed start_vaddr and end overflow
Changelog: 2010/Apr/1
- fixed start_vaddr calculation
- removed unnecessary cast.
- removed unnecessary change in smaps.
- use GFP_TEMPORARY instead of GFP_KERNEL
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: San Mehat <san@google.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
[ Fixed kmalloc failure return code as per Matt ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 3 Apr 2010 02:50:11 +0000 (19:50 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: 5965/1: Fix soft lockup in at91 udc driver
ARM: 6006/1: ARM: Use the correct NOP size in memmove for Thumb-2 kernel builds
ARM: 6005/1: arm: kprobes: fix register corruption with jprobes
ARM: 6003/1: removing compilation warning from pl061.h
ARM: 6001/1: removing compilation warning comming from clkdev.h
ARM: 6000/1: removing compilation warning comming from <asm/irq.h>
ARM: 5999/1: Including device.h and resource.h header files in linux/amba/bus.h
ARM: 5997/1: ARM: Correct the VFPv3 detection
ARM: 5996/1: ARM: Change the mandatory barriers implementation (4/4)
ARM: 5995/1: ARM: Add L2x0 outer_sync() support (3/4)
ARM: 5994/1: ARM: Add outer_cache_fns.sync function pointer (2/4)
ARM: 5993/1: ARM: Move the outer_cache definitions into a separate file (1/4)
Linus Torvalds [Sat, 3 Apr 2010 02:49:50 +0000 (19:49 -0700)]
Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6
* 'merge' of git://git.secretlab.ca/git/linux-2.6:
powerpc/5200: in lpbfifo, flag DMA irqs as enabled after requesting them
powerpc/fsl: add device tree binding for QE firmware
of/flattree: Fix unhandled OF_DT_NOP tag when unflattening the device tree
Linus Torvalds [Sat, 3 Apr 2010 02:48:54 +0000 (19:48 -0700)]
Merge branch 'reiserfs/kill-bkl' of git://git./linux/kernel/git/frederic/random-tracing
* 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
reiserfs: Fix locking BUG during mount failure
Clemens Ladisch [Fri, 2 Apr 2010 16:46:06 +0000 (18:46 +0200)]
PCI quirk: RS780/RS880: disable MSI behind the PCI bridge
The missing initialization of the nb_cntl.strap_msi_enable does not
seem to be the only problem that prevents MSI, so that quirk is not
sufficient to enable MSI on all machines. To be safe, disable MSI
unconditionally for the internal graphics and HDMI audio on these
chipsets.
[rjw: Added the PCI_VENDOR_ID_AI quirk.]
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 3 Apr 2010 02:45:05 +0000 (19:45 -0700)]
Merge branch 'kgdb-fixes' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb
* 'kgdb-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kgdb: Turn off tracing while in the debugger
kgdb: use atomic_inc and atomic_dec instead of atomic_set
kgdb: eliminate kgdb_wait(), all cpus enter the same way
kgdbts,sh: Add in breakpoint pc offset for superh
kgdb: have ebin2mem call probe_kernel_write once
Linus Torvalds [Sat, 3 Apr 2010 02:44:42 +0000 (19:44 -0700)]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/suspend-2.6
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
Freezer: Fix buggy resume test for tasks frozen with cgroup freezer
Freezer: Only show the state of tasks refusing to freeze
Oleg Nesterov [Fri, 2 Apr 2010 16:05:12 +0000 (18:05 +0200)]
tty: release_one_tty() forgets to put pids
release_one_tty(tty) can be called when tty still has a reference
to pgrp/session. In this case we leak the pid.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Wessel [Fri, 2 Apr 2010 16:57:18 +0000 (11:57 -0500)]
kgdb: Turn off tracing while in the debugger
The kernel debugger should turn off kernel tracing any time the
debugger is active and restore it on resume.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Jason Wessel [Fri, 2 Apr 2010 19:58:18 +0000 (14:58 -0500)]
kgdb: use atomic_inc and atomic_dec instead of atomic_set
Memory barriers should be used for the kgdb cpu synchronization. The
atomic_set() does not imply a memory barrier.
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Fri, 2 Apr 2010 16:47:02 +0000 (11:47 -0500)]
kgdb: eliminate kgdb_wait(), all cpus enter the same way
This is a kgdb architectural change to have all the cpus (master or
slave) enter the same function.
A cpu that hits an exception (wants to be the master cpu) will call
kgdb_handle_exception() from the trap handler and then invoke a
kgdb_roundup_cpu() to synchronize the other cpus and bring them into
the kgdb_handle_exception() as well.
A slave cpu will enter kgdb_handle_exception() from the
kgdb_nmicallback() and set the exception state to note that the
processor is a slave.
Previously the salve cpu would have called kgdb_wait(). This change
allows the debug core to change cpus without resuming the system in
order to inspect arch specific cpu information.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Fri, 2 Apr 2010 16:31:35 +0000 (11:31 -0500)]
kgdbts,sh: Add in breakpoint pc offset for superh
The kgdb test suite mimics the behavior of gdb. For the sh
architecture the pc must be decremented by 2 for software breakpoint.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Jason Wessel [Fri, 2 Apr 2010 16:33:29 +0000 (11:33 -0500)]
kgdb: have ebin2mem call probe_kernel_write once
Rather than call probe_kernel_write() one byte at a time, process the
whole buffer locally and pass the entire result in one go. This way,
architectures that need to do special handling based on the length can
do so, or we only end up calling memcpy() once.
[sonic.zhang@analog.com: Reported original problem and preliminary patch]
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Oleg Nesterov [Tue, 30 Mar 2010 16:58:29 +0000 (18:58 +0200)]
sched: set_cpus_allowed_ptr(): Don't use rq->migration_thread after unlock
Trivial typo fix. rq->migration_thread can be NULL after
task_rq_unlock(), this is why we have "mt" which should be
used instead.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <
20100330165829.GA18284@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mike Galbraith [Tue, 30 Mar 2010 09:09:53 +0000 (11:09 +0200)]
sched: Fix proc_sched_set_task()
Latencytop clearing sum_exec_runtime via proc_sched_set_task() breaks
task_times(). Other places in kernel use nvcsw and nivcsw, which are
being cleared as well, Clear task statistics only.
Reported-by: Török Edwin <edwintorok@gmail.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <
1269940193.19286.14.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds [Fri, 2 Apr 2010 15:18:02 +0000 (08:18 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: Add NOGET quirk for Quanta Pixart touchscreen
HID: fix oops in gyration_event()
Linus Torvalds [Fri, 2 Apr 2010 14:33:38 +0000 (07:33 -0700)]
Merge branch 'sh/for-2.6.34' of git://git./linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: Fix up the SH-3 build for recent TLB changes.
sh: export return_address() symbol.
sh: Enable the mmu in start_secondary()
sh: Fix FDPIC binary loader
arch/sh/kernel: Use set_cpus_allowed_ptr
sh: Update ecovec_defconfig
USB gadget r8a66597-udc.c: duplicated include
sh: update the TLB replacement counter for entry wiring.
Paul Mundt [Fri, 2 Apr 2010 07:13:27 +0000 (16:13 +0900)]
sh: Fix up the SH-3 build for recent TLB changes.
While the MMUCR.URB and ITLB/UTLB differentiation works fine for all SH-4
and later TLBs, these features are absent on SH-3. This splits out
local_flush_tlb_all() in to SH-4 and PTEAEX copies while restoring the
old SH-3 one, subsequently fixing up the build.
This will probably want some further reordering and tidying in the
future, but that's out of scope at present.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Fri, 2 Apr 2010 07:02:33 +0000 (16:02 +0900)]
sh: export return_address() symbol.
This is needed with some of the tracing code built as modules, so provide
the export.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Linus Torvalds [Thu, 1 Apr 2010 16:19:42 +0000 (09:19 -0700)]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (76 commits)
drm/radeon/kms: enable ACPI powermanagement mode on radeon gpus.
drm/radeon/kms: rs400/480 should set common registers.
drm/radeon/kms: add sanity check to wptr.
drm/radeon/kms/evergreen: get DP working
drm/radeon/kms: add hw_i2c module option
drm/radeon/kms: use new pre/post_xfer i2c bit algo hooks
drm/radeon/kms: disable MSI on IGP chips
drm/radeon/kms: display watermark updates (v2)
drm/radeon/kms/dp: disable training pattern on the sink at the end of link training
drm/radeon/kms: minor fixes for eDP with LCD* device tags (v2)
drm/radeon/kms/dp: remove extraneous training complete call
drm/radeon/kms/atom: minor fixes to transmitter setup
drm/radeon/kms: Only restrict BO to visible VRAM size when pinning to VRAM.
drm: fix build error when SYSRQ is disabled
drm/radeon/kms: fix macbookpro connector quirk
drm/radeon/r6xx/r7xx: further safe reg clean up
drm/radeon: bump the UMS driver version for r6xx/r7xx const buffer support
drm/radeon/kms: bump the version for r6xx/r7xx const buffer support
drm/radeon/r6xx/r7xx: CS parser fixes
drm/radeon/kms: fix some typos in r6xx/r7xx hpd setup
...
Fix up MSI-related conflicts in drivers/gpu/drm/radeon/radeon_irq_kms.c
Linus Torvalds [Thu, 1 Apr 2010 16:14:20 +0000 (09:14 -0700)]
Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (35 commits)
microblaze: Support word copying in copy_tofrom_user
microblaze: Print early printk information to log buffer
microblaze: head.S typo fix
microblaze: Use MICROBLAZE_TLB_SIZE in asm code
microblaze: Kconfig Fix - pci
microblaze: Adding likely macros
microblaze: Add .type and .size to ASM functions
microblaze: Fix TLB macros
microblaze: Use instruction with delay slot
microblaze: Remove additional resr and rear loading
microblaze: Change register usage for ESR and EAR
microblaze: Prepare work for optimization in exception code
microblaze: Add DEBUG option
microblaze: Support systems without lmb bram
microblaze: uaccess: Sync strlen, strnlen, copy_to/from_user
microblaze: uaccess: Unify __copy_tofrom_user
microblaze: uaccess: Move functions to generic location
microblaze: uaccess: Fix put_user for noMMU
microblaze: uaccess: Fix get_user macro for noMMU
microblaze: uaccess: fix clear_user for noMMU kernel
...
Linus Torvalds [Thu, 1 Apr 2010 16:13:57 +0000 (09:13 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mjg59/platform-drivers-x86
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
eeepc-wmi: new driver for WMI based hotkeys on Eee PC laptops
asus-laptop: fix warning in asus_handle_init
Oleg Nesterov [Thu, 1 Apr 2010 13:13:57 +0000 (15:13 +0200)]
oom: fix the unsafe usage of badness() in proc_oom_score()
proc_oom_score(task) has a reference to task_struct, but that is all.
If this task was already released before we take tasklist_lock
- we can't use task->group_leader, it points to nowhere
- it is not safe to call badness() even if this task is
->group_leader, has_intersects_mems_allowed() assumes
it is safe to iterate over ->thread_group list.
- even worse, badness() can hit ->signal == NULL
Add the pid_alive() check to ensure __unhash_process() was not called.
Also, use "task" instead of task->group_leader. badness() should return
the same result for any sub-thread. Currently this is not true, but
this should be changed anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Simek [Mon, 22 Mar 2010 19:31:26 +0000 (20:31 +0100)]
microblaze: Support word copying in copy_tofrom_user
Word copying is used only for aligned addresses.
Here is space for improving to use any better copying technique.
Look at memcpy implementation.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Wed, 24 Mar 2010 10:07:10 +0000 (11:07 +0100)]
microblaze: Print early printk information to log buffer
If early printk console is not enabled then all messages
are written to log buffer.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Wed, 24 Mar 2010 10:06:23 +0000 (11:06 +0100)]
microblaze: head.S typo fix
I forget to change register name in comments.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Wed, 24 Mar 2010 09:09:17 +0000 (10:09 +0100)]
microblaze: Use MICROBLAZE_TLB_SIZE in asm code
TLB size was hardcoded in asm code. This patch brings ability
to change TLB size only in one place. (mmu.h).
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Tue, 23 Mar 2010 14:46:10 +0000 (15:46 +0100)]
microblaze: Kconfig Fix - pci
I forget to remove pci Kconfig option.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Tue, 23 Mar 2010 14:37:02 +0000 (15:37 +0100)]
microblaze: Adding likely macros
On the base on GCOV analytics is helpful to add likely/unlikely
macros.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Tue, 23 Mar 2010 07:09:32 +0000 (08:09 +0100)]
microblaze: Add .type and .size to ASM functions
Cachegrind analysis need this fix to be able to log asm functions.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 22 Mar 2010 13:54:35 +0000 (14:54 +0100)]
microblaze: Fix TLB macros
To be able to do trace TLB operations.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 22 Mar 2010 19:43:27 +0000 (20:43 +0100)]
microblaze: Use instruction with delay slot
Sync labels.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 19 Mar 2010 11:50:35 +0000 (12:50 +0100)]
microblaze: Remove additional resr and rear loading
RESR and REAR uses the same regs in whole file.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 19 Mar 2010 11:44:40 +0000 (12:44 +0100)]
microblaze: Change register usage for ESR and EAR
This change synchronize register usage in code.
ESR = R4
EAR = R3
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 22 Mar 2010 19:37:23 +0000 (20:37 +0100)]
microblaze: Prepare work for optimization in exception code
Any sync branch must follow mts instructions not mfs.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Thu, 18 Mar 2010 06:23:04 +0000 (07:23 +0100)]
microblaze: Add DEBUG option
Disable debug option in asm code.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 15 Mar 2010 07:48:27 +0000 (08:48 +0100)]
microblaze: Support systems without lmb bram
When the system has no lmb bram, main memory should be start from
zero because of microblaze vectors.
DTS fragment could look like:
DDR2_SDRAM: memory@0 {
device_type = "memory";
reg = < 0x0 0x10000000 >;
} ;
Then you have to setup CONFIG_KERNEL_BASE_ADDR=0 which caused
that kernel physical start address will be zero. On reset vector place
will be jump to 0x100 and on 0x100 starts kernel text.
You have to solve how to load the kernel before cpu starts.
Tested with XMD.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 22 Mar 2010 17:49:45 +0000 (18:49 +0100)]
microblaze: uaccess: Sync strlen, strnlen, copy_to/from_user
Last sync.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 22 Mar 2010 17:39:20 +0000 (18:39 +0100)]
microblaze: uaccess: Unify __copy_tofrom_user
Move to generic location.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 22 Mar 2010 17:23:45 +0000 (18:23 +0100)]
microblaze: uaccess: Move functions to generic location
noMMU and MMU use them.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 22 Mar 2010 15:22:41 +0000 (16:22 +0100)]
microblaze: uaccess: Fix put_user for noMMU
Here is small regression on dhrystone tests and I think
that on all benchmarking tests. It is due to better checking
mechanism in put_user macro
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 8 Mar 2010 09:52:24 +0000 (10:52 +0100)]
microblaze: uaccess: Fix get_user macro for noMMU
Use unified version.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 22 Mar 2010 15:02:59 +0000 (16:02 +0100)]
microblaze: uaccess: fix clear_user for noMMU kernel
Previous patches fixed only MMU version and this is the first
patch for noMMU kernel
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 8 Mar 2010 08:38:02 +0000 (09:38 +0100)]
microblaze: uaccess: Fix strncpy_from_user function
Generic implementation for noMMU and MMU version
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 22 Mar 2010 14:56:32 +0000 (15:56 +0100)]
microblaze: uaccess: fix copy_from_user macro
copy_from_user macro also use copy_tofrom_user function
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 22 Mar 2010 14:52:53 +0000 (15:52 +0100)]
microblaze: uaccess: copy_to_user unification
noMMU and MMU kernel will use copy copy_tofrom_user
asm implementation.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 22 Mar 2010 14:46:56 +0000 (15:46 +0100)]
microblaze: uaccess: sync put/get/clear_user macros
Add macro description and resort.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 22 Mar 2010 14:25:12 +0000 (15:25 +0100)]
microblaze: uaccess: fix put_user and get_user macros
Use FIXUP macros and resort them.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 5 Mar 2010 17:03:53 +0000 (18:03 +0100)]
microblaze: uaccess: fix __get_user_asm macro
It is used __FIXUP_SECTION and __EX_TABLE_SECTION macros.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 5 Mar 2010 15:50:01 +0000 (16:50 +0100)]
microblaze: uaccess: fix clean user macro
This is the first patch which does uaccess unification.
I choosed to do several patches to be able to use bisect
in future if any fault happens.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 5 Mar 2010 14:49:53 +0000 (15:49 +0100)]
microblaze: move noMMU __range_ok function to uaccess.h
The same noMMU and MMU functions should be placed in
one file.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 5 Mar 2010 14:37:57 +0000 (15:37 +0100)]
microblaze: Move exception_table_entry upward
Just sort to be able remove whole block.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 5 Mar 2010 14:34:12 +0000 (15:34 +0100)]
microblaze: Remove segment.h
I would like to use asm-generic uaccess.h where are segment
macros defined. This is just first step.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Wed, 3 Mar 2010 16:03:21 +0000 (17:03 +0100)]
microblaze: Remove memset in free_init_pages
We don't need to do it.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Arun Bhanu [Wed, 17 Mar 2010 08:06:04 +0000 (16:06 +0800)]
microblaze: Makefile cleanups
If CONFIG_INITRAMFS_SOURCE is set, "scripts/gen_initramfs_list.sh"
checks if the cpio image exists. Remove the duplicate check from the
Makefile.
Remove the "clean-kernel" variable which is unused in the Makefile and
is not used by the Kbuild.
Signed-off-by: Arun Bhanu <arun@bhanu.net>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Arun Bhanu [Wed, 17 Mar 2010 08:06:03 +0000 (16:06 +0800)]
microblaze: Fix Makefile to delete build generated files
'make clean' does not to delete the following build generated file:
arch/microblaze/boot/linux.bin.ub
'make mrproper' does not to delete the following build generated files:
arch/microblaze/boot/simpleImage.*
Fix the Makefile to delete these build generated files.
See [1] for a discussion on why simpleImage.* files are deleted with 'make
mrproper' and not with 'make clean'.
[1] http://lkml.org/lkml/2010/3/12/96
Signed-off-by: Arun Bhanu <arun@bhanu.net>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Arun Bhanu [Fri, 12 Mar 2010 08:31:40 +0000 (16:31 +0800)]
microblaze: Add a missing single quote to make 'make help' happy
'make ARCH=microblaze help' fails with the following error due to a
missing single quote.
/bin/sh: -c: line 0: unexpected EOF while looking for matching `''
/bin/sh: -c: line 1: syntax error: unexpected end of file
make: *** [help] Error 2
Signed-off-by: Arun Bhanu <arun@bhanu.net>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Steven J. Magnani [Wed, 24 Feb 2010 20:54:15 +0000 (14:54 -0600)]
microblaze: Fix "kstack=" parsing
The "kstack=" command line parameter is not parsed correctly.
All proper values are interpreted as zero.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Dave Airlie [Wed, 31 Mar 2010 03:41:35 +0000 (13:41 +1000)]
drm/radeon/kms: enable ACPI powermanagement mode on radeon gpus.
Some GPUs have an APM/ACPI PM mode selection switch and some BIOSes
set this to APM. We really want this in ACPI mode for Linux.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 31 Mar 2010 03:42:50 +0000 (13:42 +1000)]
drm/radeon/kms: rs400/480 should set common registers.
These GPUs should be setting these registers up also.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 31 Mar 2010 03:38:56 +0000 (13:38 +1000)]
drm/radeon/kms: add sanity check to wptr.
If we resume in a bad way, we'll get 0xffffffff in wptr, and then
oops with no console. This just adds a sanity check so that we can
avoid the oops and hopefully get more details out of people's systems.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 31 Mar 2010 18:42:11 +0000 (14:42 -0400)]
drm/radeon/kms/evergreen: get DP working
Need to enable the VID stream after link training
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Yong Wang [Sun, 21 Mar 2010 02:26:34 +0000 (10:26 +0800)]
eeepc-wmi: new driver for WMI based hotkeys on Eee PC laptops
Add a WMI driver for Eee PC laptops. Currently it only supports hotkeys.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Corentin Chary [Tue, 2 Mar 2010 21:24:12 +0000 (22:24 +0100)]
asus-laptop: fix warning in asus_handle_init
In function 'asus_laptop_get_info':
warning: passing argument 3 of 'asus_handle_init' from incompatible pointer type
note: expected 'char **' but argument is of type 'const char **'
Introduced by commit
c21085108a02e1b838c34f3650c8cc9fbd178615
("asus-laptop: fix style problems reported by checkpath.pl").
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Nikolaus Schulz [Wed, 31 Mar 2010 17:21:10 +0000 (02:21 +0900)]
fat: fix buffer overflow in vfat_create_shortname()
When using the string representation of a random counter as part of the base
name, ensure that it is no longer than 4 bytes.
Since we are repeatedly decrementing the counter in a loop until we have found a
unique base name, the counter may wrap around zero; therefore, it is not enough
to mask its higher bits before entering the loop, this must be done inside the
loop.
[hirofumi@mail.parknet.co.jp: use snprintf()]
Signed-off-by: Nikolaus Schulz <microschulz@web.de>
Cc: stable@kernel.org
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alex Deucher [Wed, 17 Mar 2010 06:07:37 +0000 (02:07 -0400)]
drm/radeon/kms: add hw_i2c module option
Turn off hw i2c by default except for mm i2c which
is hw only until we sort out the remaining prescale
issues on older chips. hw i2c can be enabled with
hw_i2c=1.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Sun, 14 Mar 2010 16:22:44 +0000 (12:22 -0400)]
drm/radeon/kms: use new pre/post_xfer i2c bit algo hooks
This allows us to remove the internal bit algo bus used by
the radeon i2c algo. We now register a radeon algo adapter
if the gpio line is hw capable and the hw inplementation is
available, otherwise we register a bit algo adapter.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 31 Mar 2010 04:55:14 +0000 (14:55 +1000)]
Merge branch 'v2.6.34-rc2' into drm-linus
Alex Deucher [Tue, 30 Mar 2010 21:22:32 +0000 (17:22 -0400)]
drm/radeon/kms: disable MSI on IGP chips
Doesn't seem to work reliably and the pci quirks don't
always work.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 31 Mar 2010 04:33:27 +0000 (00:33 -0400)]
drm/radeon/kms: display watermark updates (v2)
- Add module option to force the display priority
0 = auto, 1 = normal, 2 = high
- Default to high on r3xx/r4xx/rv515 chips
Fixes flickering problems during heavy acceleration
due to underflow to the display controllers
- Fill in minimal support for RS600
v2 - update display priority when bandwidth is updated
so the user can change the parameter at runtime and it
will take affect on the next modeset.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 30 Mar 2010 06:03:48 +0000 (02:03 -0400)]
drm/radeon/kms/dp: disable training pattern on the sink at the end of link training
Seems to have gotten lost in the evergreen merge.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 30 Mar 2010 01:37:08 +0000 (21:37 -0400)]
drm/radeon/kms: minor fixes for eDP with LCD* device tags (v2)
Some systems have LCD* rather than DFP* device tags in the bios
for eDP connectors; notably the new apple iMac. This fixes
things up so eDP connectors with either tag will work.
v2: fix typo
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 29 Mar 2010 18:06:10 +0000 (14:06 -0400)]
drm/radeon/kms/dp: remove extraneous training complete call
Looks like a copy/paste typo from when evergreen support
was added.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 29 Mar 2010 21:39:44 +0000 (17:39 -0400)]
drm/radeon/kms/atom: minor fixes to transmitter setup
- 8 lane links are not valid for DP
- remove unused num var
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Michel Dänzer [Fri, 26 Mar 2010 19:18:55 +0000 (19:18 +0000)]
drm/radeon/kms: Only restrict BO to visible VRAM size when pinning to VRAM.
This prevented radeon.test=1 from testing transfers from/to GTT beyond the
visible VRAM size.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Randy Dunlap [Thu, 25 Mar 2010 18:29:05 +0000 (18:29 +0000)]
drm: fix build error when SYSRQ is disabled
Fix build error when CONFIG_MAGIC_SYSRQ is not enabled:
drivers/gpu/drm/drm_fb_helper.c:915: error: 'sysrq_drm_fb_helper_restore_op' undeclared (first use in this function)
drivers/gpu/drm/drm_fb_helper.c:929: error: 'sysrq_drm_fb_helper_restore_op' undeclared (first use in this function)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 26 Mar 2010 21:14:37 +0000 (17:14 -0400)]
drm/radeon/kms: fix macbookpro connector quirk
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 26 Mar 2010 23:36:33 +0000 (19:36 -0400)]
drm/radeon/r6xx/r7xx: further safe reg clean up
- remove a few more drm only regs
- remove sampler, alu, bool, loop constant regs.
They are set via separate packet3's already
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 26 Mar 2010 19:26:51 +0000 (15:26 -0400)]
drm/radeon: bump the UMS driver version for r6xx/r7xx const buffer support
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 26 Mar 2010 19:24:14 +0000 (15:24 -0400)]
drm/radeon/kms: bump the version for r6xx/r7xx const buffer support
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 26 Mar 2010 18:52:32 +0000 (14:52 -0400)]
drm/radeon/r6xx/r7xx: CS parser fixes
- Drop some more safe regs taht userspace shouldn't hit
- Constant base regs need relocs. This allows us to use
constant buffers rather than the constant register file.
Also we don't want userspace to be able to set arbitrary
mc base values for the const caches.
- Track SQ_CONFIG so we know whether userspace is using
the cfile or constant buffers.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 24 Mar 2010 17:57:29 +0000 (13:57 -0400)]
drm/radeon/kms: fix some typos in r6xx/r7xx hpd setup
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 24 Mar 2010 22:45:32 +0000 (18:45 -0400)]
drm/radeon/r600: remove some regs are not safe regs for command buffers
Only the drm should be touching them.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Chris Wilson [Thu, 18 Mar 2010 11:56:54 +0000 (11:56 +0000)]
drm: Return ENODEV if the inode mapping changes
Replace a BUG_ON with an error code in the event that the inode mapping
changes between calls to drm_open. This may happen for instance if udev
is loaded subsequent to the original opening of the device:
[ 644.291870] kernel BUG at drivers/gpu/drm/drm_fops.c:146!
[ 644.291876] invalid opcode: 0000 [#1] SMP
[ 644.291882] last sysfs file: /sys/kernel/uevent_seqnum
[ 644.291888]
[ 644.291895] Pid: 7276, comm: lt-cairo-test-s Not tainted 2.6.34-rc1 #2 N150/N210/N220 /N150/N210/N220
[ 644.291903] EIP: 0060:[<
c11c70e3>] EFLAGS:
00210283 CPU: 0
[ 644.291912] EIP is at drm_open+0x4b1/0x4e2
[ 644.291918] EAX:
f72d8d18 EBX:
f790a400 ECX:
f73176b8 EDX:
00000000
[ 644.291923] ESI:
f790a414 EDI:
f790a414 EBP:
f647ae20 ESP:
f647adfc
[ 644.291929] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 644.291937] Process lt-cairo-test-s (pid: 7276, ti=
f647a000 task=
f73f5c80 task.ti=
f647a000)
[ 644.291941] Stack:
[ 644.291945]
00000000 f7bb7400 00000080 f6451100 f73176b8 f6479214 f6451100 f73176b8
[ 644.291957] <0>
c1297ce0 f647ae34 c11c6c04 f73176b8 f7949800 00000000 f647ae54 c1080ac5
[ 644.291969] <0>
f7949800 f6451100 00000000 f6451100 f73176b8 f6452780 f647ae70 c107d1e6
[ 644.291982] Call Trace:
[ 644.291991] [<
c11c6c04>] ? drm_stub_open+0x8a/0xb8
[ 644.292000] [<
c1080ac5>] ? chrdev_open+0xef/0x106
[ 644.292008] [<
c107d1e6>] ? __dentry_open+0xd4/0x1a6
[ 644.292015] [<
c107d35b>] ? nameidata_to_filp+0x31/0x45
[ 644.292022] [<
c10809d6>] ? chrdev_open+0x0/0x106
[ 644.292030] [<
c10864e2>] ? do_last+0x346/0x423
[ 644.292037] [<
c108789f>] ? do_filp_open+0x190/0x415
[ 644.292046] [<
c1071eb5>] ? handle_mm_fault+0x214/0x710
[ 644.292053] [<
c107d008>] ? do_sys_open+0x4d/0xe9
[ 644.292061] [<
c1016462>] ? do_page_fault+0x211/0x23f
[ 644.292068] [<
c107d0f0>] ? sys_open+0x23/0x2b
[ 644.292075] [<
c1002650>] ? sysenter_do_call+0x12/0x26
[ 644.292079] Code: 89 f0 89 55 dc e8 8d 96 0a 00 8b 45 e0 8b 55 dc 83 78 04 01 75 28 8b 83 18 02 00 00 85 c0 74 0f 8b 4d ec 3b 81 ac 00 00 00 74 13 <0f> 0b eb fe 8b 4d ec 8b 81 ac 00 00 00 89 83 18 02 00 00 89 f0
[ 644.292143] EIP: [<
c11c70e3>] drm_open+0x4b1/0x4e2 SS:ESP 0068:
f647adfc
[ 644.292175] ---[ end trace
2ddd476af89a60fa ]---
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pauli Nieminen [Fri, 19 Mar 2010 07:44:33 +0000 (07:44 +0000)]
drm/radeon/kms: Fix NULL pointer dereference if memory allocation failed.
When there is allocation failure in radeon_cs_parser_relocs parser->nrelocs
is not cleaned. This causes NULL pointer defeference in radeon_cs_parser_fini
when clean up code is trying to loop over the relocation array and free the
objects.
Fix adds a check for a possible NULL pointer in clean up code.
Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jerome Glisse [Wed, 17 Mar 2010 14:44:29 +0000 (14:44 +0000)]
drm/radeon/kms: avoid possible oops (call gart_fini before gart_disable)
radeon_gart_fini might call GART unbind callback function which
might try to access GART table but if gart_disable is call first
the GART table will be unmapped so any access to it will oops.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 19 Mar 2010 00:33:44 +0000 (10:33 +1000)]
drm/radeon/kms: don't print error on -ERESTARTSYS.
We can get this if the user moves the mouse when we are waiting to move
some stuff around in the validate. Don't fail.
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Thu, 18 Mar 2010 05:04:01 +0000 (01:04 -0400)]
drm/radeon/kms/atom: make sure tables are valid (v2)
Check that atom cmd and data tables are valid
before using them.
(v2)
- fix some whitespace errors noticed by Rafał Miłecki
- check a few more cases
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 17 Mar 2010 23:50:59 +0000 (19:50 -0400)]
drm/radeon/kms: remove lvds quirks
- no longer needed with the latest new pll algo fixes.
- also don't use lcd pll limits. They don't seem
to work well for all systems. If we have a case where
they are useful, we can set the flag for that case.
fixes fdo bug 27083
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Sun, 21 Mar 2010 15:09:24 +0000 (11:09 -0400)]
drm/radeon/kms: fix display bandwidth setup on rs4xx
I missed rs4xx in
7f1e613daf0fdd0884316ab25a749db3c671329e
Fixes fdo bug 27219.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Sun, 21 Mar 2010 18:02:25 +0000 (14:02 -0400)]
drm/radeon/kms: never treat rs4xx as AGP
RS4xx+ IGP chips use an internal gart, however,
some of them have the agp cap bits set in their pci
configs. Make sure to clear the AGP flag as AGP will
not work with them.
Should fix fdo bug 27225
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Wed, 17 Mar 2010 00:54:38 +0000 (20:54 -0400)]
drm/radeon/kms: display watermark fixes
- rs780/880 were using the wrong bandwidth functions
- convert r1xx-r4xx to use the same pm sclk/mclk structs as
r5xx+
- move bandwidth setup to a common function
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Tue, 16 Mar 2010 21:08:06 +0000 (17:08 -0400)]
drm/radeon/kms: init rdev->num_crtc at asic init
Replace hardcoded numbers with rdev->num_crtc.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Mon, 15 Mar 2010 05:36:32 +0000 (01:36 -0400)]
drm/radeon/kms/pm: fix typo in power table parsing
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 5 Mar 2010 19:50:37 +0000 (14:50 -0500)]
drm/radeon/kms: gfx init fixes for r6xx/r7xx
This fixes some issues with the last gfx init patch.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Sun, 14 Mar 2010 20:31:36 +0000 (16:31 -0400)]
drm/radeon/kms/pm: fix segfault in clock code
Make sure we have a crtc assigned to the encoder
before dereferencing it.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Alex Deucher [Thu, 11 Mar 2010 15:01:17 +0000 (10:01 -0500)]
drm/radeon/kms: expose thermal/fan i2c buses
Look up i2c bus in the power table and expose it.
You'll need to load a hwmon driver for any chips
on the bus, this patch just exposes the bus.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Jeff Mahoney [Mon, 29 Mar 2010 19:12:39 +0000 (15:12 -0400)]
reiserfs: Fix locking BUG during mount failure
Commit
8ebc423238341b52912c7295b045a32477b33f09 (reiserfs: kill-the-BKL)
introduced a bug in the mount failure case.
The error label releases the lock before calling journal_release_error,
but it requires that the lock be held. do_journal_release unlocks and
retakes it. When it releases it without it held, we trigger a BUG().
The error_alloc label skips the unlock since the lock isn't held yet
but none of the other conditions that are clean up exist yet either.
This patch returns immediately after the kzalloc failure and moves
the reiserfs_write_unlock after the journal_release_error call.
This was reported in https://bugzilla.novell.com/show_bug.cgi?id=591807
Reported-by: Thomas Siedentopf <thomas.siedentopf@novell.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Thomas Siedentopf <thomas.siedentopf@novell.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: 2.6.33.x <stable@kernel.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>