OSDN Git Service
Paolo Bonzini [Fri, 30 Jan 2015 08:41:38 +0000 (09:41 +0100)]
Merge tag 'kvm-arm-fixes-3.19-2' of git://git./linux/kernel/git/kvmarm/kvmarm into kvm-master
Second round of fixes for KVM/ARM for 3.19.
Fixes memory corruption issues on APM platforms and swapping issues on
DMA-coherent systems.
Marc Zyngier [Mon, 5 Jan 2015 21:13:24 +0000 (21:13 +0000)]
arm/arm64: KVM: Use kernel mapping to perform invalidation on page fault
When handling a fault in stage-2, we need to resync I$ and D$, just
to be sure we don't leave any old cache line behind.
That's very good, except that we do so using the *user* address.
Under heavy load (swapping like crazy), we may end up in a situation
where the page gets mapped in stage-2 while being unmapped from
userspace by another CPU.
At that point, the DC/IC instructions can generate a fault, which
we handle with kvm->mmu_lock held. The box quickly deadlocks, user
is unhappy.
Instead, perform this invalidation through the kernel mapping,
which is guaranteed to be present. The box is much happier, and so
am I.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Marc Zyngier [Fri, 19 Dec 2014 16:48:06 +0000 (16:48 +0000)]
arm/arm64: KVM: Invalidate data cache on unmap
Let's assume a guest has created an uncached mapping, and written
to that page. Let's also assume that the host uses a cache-coherent
IO subsystem. Let's finally assume that the host is under memory
pressure and starts to swap things out.
Before this "uncached" page is evicted, we need to make sure
we invalidate potential speculated, clean cache lines that are
sitting there, or the IO subsystem is going to swap out the
cached view, loosing the data that has been written directly
into memory.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Marc Zyngier [Fri, 19 Dec 2014 16:05:31 +0000 (16:05 +0000)]
arm/arm64: KVM: Use set/way op trapping to track the state of the caches
Trying to emulate the behaviour of set/way cache ops is fairly
pointless, as there are too many ways we can end-up missing stuff.
Also, there is some system caches out there that simply ignore
set/way operations.
So instead of trying to implement them, let's convert it to VA ops,
and use them as a way to re-enable the trapping of VM ops. That way,
we can detect the point when the MMU/caches are turned off, and do
a full VM flush (which is what the guest was trying to do anyway).
This allows a 32bit zImage to boot on the APM thingy, and will
probably help bootloaders in general.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Linus Torvalds [Mon, 26 Jan 2015 04:04:41 +0000 (20:04 -0800)]
Linux 3.19-rc6
Linus Torvalds [Mon, 26 Jan 2015 02:11:17 +0000 (18:11 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Hopefully the last round of fixes for 3.19
- regression fix for the LDT changes
- regression fix for XEN interrupt handling caused by the APIC
changes
- regression fixes for the PAT changes
- last minute fixes for new the MPX support
- regression fix for 32bit UP
- fix for a long standing relocation issue on 64bit tagged for stable
- functional fix for the Hyper-V clocksource tagged for stable
- downgrade of a pr_err which tends to confuse users
Looks a bit on the large side, but almost half of it are valuable
comments"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Change Fast TSC calibration failed from error to info
x86/apic: Re-enable PCI_MSI support for non-SMP X86_32
x86, mm: Change cachemode exports to non-gpl
x86, tls: Interpret an all-zero struct user_desc as "no segment"
x86, tls, ldt: Stop checking lm in LDT_empty
x86, mpx: Strictly enforce empty prctl() args
x86, mpx: Fix potential performance issue on unmaps
x86, mpx: Explicitly disable 32-bit MPX support on 64-bit kernels
x86, hyperv: Mark the Hyper-V clocksource as being continuous
x86: Don't rely on VMWare emulating PAT MSR correctly
x86, irq: Properly tag virtualization entry in /proc/interrupts
x86, boot: Skip relocs when load address unchanged
x86/xen: Override ACPI IRQ management callback __acpi_unregister_gsi
ACPI: pci: Do not clear pci_dev->irq in acpi_pci_irq_disable()
x86/xen: Treat SCI interrupt as normal GSI interrupt
Linus Torvalds [Mon, 26 Jan 2015 02:07:01 +0000 (18:07 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"From the irqchip departement you get:
- regression fix for omap-intc
- regression fix for atmel-aic-common
- functional correctness fix for hip04
- type mismatch fix for gic-v3-its
- proper error pointer check for mtd-sysirq
Mostly one and two liners except for the omap regression fix which is
slightly larger than desired"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type
irqchip: omap-intc: Fix legacy DMA regression
irqchip: gic-v3-its: Fix use of max with decimal constant
irqchip: hip04: Initialize hip04_cpu_map to 0xffff
irqchip: mtk-sysirq: Use IS_ERR() instead of NULL pointer check
Linus Torvalds [Mon, 26 Jan 2015 01:47:34 +0000 (17:47 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A set of small fixes:
- regression fix for exynos_mct clocksource
- trivial build fix for kona clocksource
- functional one liner fix for the sh_tmu clocksource
- two validation fixes to prevent (root only) data corruption in the
kernel via settimeofday and adjtimex. Tagged for stable"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: adjtimex: Validate the ADJ_FREQUENCY values
time: settimeofday: Validate the values of tv from user
clocksource: sh_tmu: Set cpu_possible_mask to fix SMP broadcast
clocksource: kona: fix __iomem annotation
clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write
Linus Torvalds [Mon, 26 Jan 2015 01:29:06 +0000 (17:29 -0800)]
Merge tag 'armsoc-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A week's worth of fixes for various ARM platforms. Diff wise, the
largest fix is for OMAP to deal with how GIC now registers interrupts
(irq_domain_add_legacy() -> irq_domain_add_linear() changes).
Besides this, a few more renesas platforms needed the GIC instatiation
done for legacy boards. There's also a fix that disables coherency of
mvebu due to issues, and a few other smaller fixes"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: add baud rate to Juno stdout-path
ARM: dts: imx25: Fix PWM "per" clocks
bus: mvebu-mbus: fix support of MBus window 13
Merge tag 'mvebu-fixes-3.19-3' of git://git.infradead.org/linux-mvebu into fixes
ARM: mvebu: completely disable hardware I/O coherency
ARM: OMAP: Work around hardcoded interrupts
ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds
ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds
arm: boot: dts: dra7: enable dwc3 suspend PHY quirk
Linus Torvalds [Mon, 26 Jan 2015 01:27:18 +0000 (17:27 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple of fixes - deadlock in CIFS and build breakage in cris serial
driver (resurfaced f_dentry in there)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Convert file->f_dentry->d_inode to file_inode()
fix deadlock in cifs_ioctl_clone()
Linus Torvalds [Mon, 26 Jan 2015 01:25:01 +0000 (17:25 -0800)]
Merge tag 'dm-3.19-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Two stable fixes for dm-cache and one 3.19 DM core fix:
- fix potential for dm-cache metadata corruption via stale metadata
buffers being used when switching an inactive cache table to
active; this could occur due to each table having it's own bufio
client rather than sharing the client between tables.
- fix dm-cache target to properly account for discard IO while
suspending otherwise IO quiescing could complete prematurely.
- fix DM core's handling of multiple internal suspends by maintaining
an 'internal_suspend_count' and only resuming the device when this
count drops to zero"
* tag 'dm-3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix handling of multiple internal suspends
dm cache: fix problematic dual use of a single migration count variable
dm cache: share cache-metadata object across inactive and active DM tables
Linus Torvalds [Mon, 26 Jan 2015 01:23:34 +0000 (17:23 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull two block layer fixes from Jens Axboe:
"Two small patches that should make it into 3.19:
- a fixup from me for NVMe, making the cq_vector a signed variable.
Otherwise our -1 comparison fails, and commit
2b25d981790b doesn't
do what it was supposed to.
- a fixup for the hotplug handling for blk-mq from Ming Lei, using
the proper kobject referencing to ensure we release resources at
the right time"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: fix hctx/ctx kobject use-after-free
NVMe: cq_vector should be signed
Linus Torvalds [Sat, 24 Jan 2015 22:52:30 +0000 (14:52 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
pULL SCSI fixes from James Bottomley:
"This consists of four real fixes and three MAINTAINER updates.
Three of the fixes are obvious (the DIX and atomic allocation are bug
on and warn on fixes and the other is just trivial) and the ipr one is
a bit more involved but is required because without it, the card
double completes aborted commands and causes a kernel oops"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
MAINTAINERS: ibmvscsi driver maintainer change
MAINTAINERS: ibmvfc driver maintainer change
MAINTAINERS: Remove self as isci maintainer
scsi_debug: test always evaluates to false, || should be used instead
scsi: Avoid crashing if device uses DIX but adapter does not support it
scsi_debug: use atomic allocation in resp_rsup_opcodes
ipr: wait for aborted command responses
Linus Torvalds [Sat, 24 Jan 2015 22:47:24 +0000 (14:47 -0800)]
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
"This will fix reboot issues with the imx2_wdt driver and it also drops
some forgotten owner assignments from platform_drivers"
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: drop owner assignment from platform_drivers
watchdog: imx2_wdt: Disable power down counter on boot
watchdog: imx2_wdt: Improve power management support.
Linus Torvalds [Sat, 24 Jan 2015 22:37:31 +0000 (14:37 -0800)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging
Pull hwmon update from Jean Delvare:
"This contains a single thing: a new driver for the temperature sensor
embedded in the Intel 5500/5520/X58 chipsets.
Sorry for the late request, it's been so long since I last sent a pull
request and I've been so busy with other tasks meanwhile that I simply
forgot about these patches. But given that this is a new driver, it
can't introduce any regression so I thought it could still be OK.
This has been in linux-next for months now"
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (i5500_temp) Convert to use ATTRIBUTE_GROUPS macro
hwmon: (i5500_temp) Convert to module_pci_driver
hwmon: (i5500_temp) Don't bind to disabled sensors
hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_groups
hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets
Linus Torvalds [Sat, 24 Jan 2015 22:34:54 +0000 (14:34 -0800)]
Merge tag 'media/v3.19-4' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix some race conditions caused by a regression on videobuf2
- fix a interrupt release bug on cx23885
- fix support for Mygica T230 and HVR4400
- fix compilation breakage when USB is not selected on tlg2300
- fix capabilities report on ompa3isp, soc-camera, rcar_vin and
pvrusb2
* tag 'media/v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] omap3isp: Correctly set QUERYCAP capabilities
[media] cx23885: fix free interrupt bug
[media] pvrusb2: fix missing device_caps in querycap
[media] vb2: fix vb2_thread_stop race conditions
[media] rcar_vin: Update device_caps and capabilities in querycap
[media] soc-camera: fix device capabilities in multiple camera host drivers
[media] Fix Mygica T230 support
[media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry
[media] tlg2300: Fix media dependencies
Mikulas Patocka [Thu, 8 Jan 2015 23:52:26 +0000 (18:52 -0500)]
dm: fix handling of multiple internal suspends
Commit
ffcc393641 ("dm: enhance internal suspend and resume interface")
attempted to handle multiple internal suspends on the same device, but
it did that incorrectly. When these functions are called in this order
on the same device the device is no longer suspended, but it should be:
dm_internal_suspend_noflush
dm_internal_suspend_noflush
dm_internal_resume
Fix this bug by maintaining an 'internal_suspend_count' and resuming
the device when this count drops to zero.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Axel Lin [Sat, 24 Jan 2015 13:16:22 +0000 (14:16 +0100)]
hwmon: (i5500_temp) Convert to use ATTRIBUTE_GROUPS macro
Use ATTRIBUTE_GROUPS macro to simplify the code a bit.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Axel Lin [Sat, 24 Jan 2015 13:16:22 +0000 (14:16 +0100)]
hwmon: (i5500_temp) Convert to module_pci_driver
Use module_pci_driver to simplify the code a bit.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Jean Delvare [Sat, 24 Jan 2015 13:16:21 +0000 (14:16 +0100)]
hwmon: (i5500_temp) Don't bind to disabled sensors
On many motherboards, for an unknown reason, the thermal sensor seems
to be disabled and will return a constant temperature value of 36.5
degrees Celsius. Don't bind to the device in that case, so that we
don't report this bogus value to userspace.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Romain Dolbeau <romain@dolbeau.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Jean Delvare [Sat, 24 Jan 2015 13:16:21 +0000 (14:16 +0100)]
hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_groups
Use devm_hwmon_device_register_with_groups() to simplify the code a
bit.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Romain Dolbeau <romain@dolbeau.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Jean Delvare [Sat, 24 Jan 2015 13:16:21 +0000 (14:16 +0100)]
hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets
The Intel 5500, 5520 and X58 chipsets embed a digital thermal sensor.
This new driver supports it.
Note that on many boards the sensor seems to be disabled and reports
the minimum value (36.5 degrees Celsius) all the time.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Romain Dolbeau <romain@dolbeau.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Linus Torvalds [Sat, 24 Jan 2015 02:31:27 +0000 (14:31 +1200)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"We have a few fixes in my for-linus branch.
Qu Wenruo's batch fix a regression between some our merge window pull
and the inode_cache feature. The rest are smaller bugs"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: Don't call btrfs_start_transaction() on frozen fs to avoid deadlock.
btrfs: Fix the bug that fs_info->pending_changes is never cleared.
btrfs: fix state->private cast on 32 bit machines
Btrfs: fix race deleting block group from space_info->ro_bgs list
Btrfs: fix incorrect freeing in scrub_stripe
btrfs: sync ioctl, handle errors after transaction start
Linus Torvalds [Fri, 23 Jan 2015 23:26:13 +0000 (11:26 +1200)]
Merge tag 'platform-drivers-x86-v3.19-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull platform driver fix from Darren Hart:
"Revert keyboard backlight sysfs support and documentation.
The support for the dell-laptop keyboard backlight was flawed and the
fix:
https://lkml.org/lkml/2015/1/14/539
was more invasive that I felt comfortable sending at RC5.
This series reverts the support for the dell-laptop keyboard backlight
as well as the documentation for the newly created sysfs attributes.
We'll get this implemented correctly for 3.20"
* tag 'platform-drivers-x86-v3.19-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
Revert "platform: x86: dell-laptop: Add support for keyboard backlight"
Revert "Documentation: Add entry for dell-laptop sysfs interface"
Linus Torvalds [Fri, 23 Jan 2015 22:58:47 +0000 (10:58 +1200)]
Merge tag 'pci-v3.19-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"These are fixes for:
- a resource management problem that causes a Radeon "Fatal error
during GPU init" on machines where the BIOS programmed an invalid
Root Port window. This was a regression in v3.16.
- an Atheros AR93xx device that doesn't handle PCI bus resets
correctly. This was a regression in v3.14.
- an out-of-date email address"
* tag 'pci-v3.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Update Richard Zhu's email address
sparc/PCI: Clip bridge windows to fit in upstream windows
powerpc/PCI: Clip bridge windows to fit in upstream windows
parisc/PCI: Clip bridge windows to fit in upstream windows
mn10300/PCI: Clip bridge windows to fit in upstream windows
microblaze/PCI: Clip bridge windows to fit in upstream windows
ia64/PCI: Clip bridge windows to fit in upstream windows
frv/PCI: Clip bridge windows to fit in upstream windows
alpha/PCI: Clip bridge windows to fit in upstream windows
x86/PCI: Clip bridge windows to fit in upstream windows
PCI: Add pci_claim_bridge_resource() to clip window if necessary
PCI: Add pci_bus_clip_resource() to clip to fit upstream window
PCI: Pass bridge device, not bus, when updating bridge windows
PCI: Mark Atheros AR93xx to avoid bus reset
PCI: Add flag for devices where we can't use bus reset
Linus Torvalds [Fri, 23 Jan 2015 22:55:05 +0000 (10:55 +1200)]
Merge tag 'devicetree-for-linus' of git://git./linux/kernel/git/glikely/linux
Pull devicetree bug fixes and documentation updates from Grant Likely:
"A few bugfixes for the new DT overlay feature, documentation updates,
spelling corrections, and changes to MAINTAINERS. Nothing earth
shattering here"
* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux:
of/unittest: Overlays with sub-devices tests
of/platform: Handle of_populate drivers in notifier
of/overlay: Do not generate duplicate nodes
devicetree: document the "qemu" and "virtio" vendor prefixes
devicetree: document ARM bindings for QEMU's Firmware Config interface
Documentation: of: fix typo in graph bindings
dma-mapping: fix debug print to display correct dma_pfn_offset
of: replace Asahi Kasei Corp vendor prefix
ARM: dt: GIC: Spelling s/specific/specifier/, s/flaggs/flags/
dt/bindings: arm-boards: Spelling s/pointong/pointing/
MAINTAINERS: Update DT website and git repository
MAINTAINERS: drop DT regex matching on of_get_property and of_match_table
Olof Johansson [Fri, 23 Jan 2015 22:23:40 +0000 (14:23 -0800)]
Merge tag 'imx-fixes-3.19-2' of git://git./linux/kernel/git/shawnguo/linux into fixes
Merge "ARM: imx: fixes for 3.19, 2nd round" from Shawn Guo:
The i.MX fixes for 3.19, 2nd round:
- Correct pwm clock assignment in i.MX25 device tree to fix the broken
pwm support on i.MX25
* tag 'imx-fixes-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx25: Fix PWM "per" clocks
Signed-off-by: Olof Johansson <olof@lixom.net>
Robin Murphy [Thu, 22 Jan 2015 11:21:32 +0000 (11:21 +0000)]
arm64: dts: add baud rate to Juno stdout-path
Without explicit command-line parameters, the Juno UART ends up running
at 57600 baud in the kernel, which is at odds with the 115200 baud used
by the rest of the firmware. Since commit
7914a7c5651a5161 now lets us
fix this by specifying default options in stdout-path, do so.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 23 Jan 2015 22:08:13 +0000 (14:08 -0800)]
Merge tag 'mvebu-fixes-3.19-4' of git://git.infradead.org/linux-mvebu into fixes
Merge "mvebu/fixes #3" from Andrew Lunn:
mvebu fixes for 3.19. (Part 4)
bus: mvebu-mbus: fix support of MBus window 13
* tag 'mvebu-fixes-3.19-4' of git://git.infradead.org/linux-mvebu:
bus: mvebu-mbus: fix support of MBus window 13
ARM: mvebu: completely disable hardware I/O coherency
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Fri, 23 Jan 2015 21:58:17 +0000 (09:58 +1200)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Three small fixes.
Two for x86 and one avoids that sparse bails out"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: SYSENTER emulation is broken
KVM: x86: Fix of previously incomplete fix for CVE-2014-8480
KVM: fix sparse warning in include/trace/events/kvm.h
Linus Torvalds [Fri, 23 Jan 2015 21:57:01 +0000 (09:57 +1200)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Another round of small ARM fixes.
restore_user_regs early stack deallocation is buggy in the presence of
FIQs which switch to SVC mode, and could lead to corrupted registers
being returned to a user process given an inopportune FIQ event.
Another bug was spotted in the ARM perf code where it could lose track
of perf counter overflows, leading to incorrect perf results.
Lastly, a bug in arm_add_memory() was spotted where the memory sizes
aren't properly rounded. As most people pass properly rounded sizes,
this hasn't been noticed"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8292/1: mm: fix size rounding-down of arm_add_memory() function
ARM: 8255/1: perf: Prevent wraparound during overflow
ARM: 8266/1: Remove early stack deallocation from restore_user_regs
Linus Torvalds [Fri, 23 Jan 2015 21:55:13 +0000 (09:55 +1200)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull two arm64 fixes from Will Deacon:
"Arm64 fixes seem to come in pairs recently. We've got a fix for
removing device-tree blobs when doing a make clean and another one
addressing a missing include, which fixes build failures in -next for
allmodconfig (spotted by Mark's buildbot).
Summary from signed tag:
- fix cleaning of .dtbs following directory restructuring
- fix allmodconfig build breakage in -next due to missing include"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: dump: Fix implicit inclusion of definition for PCI_IOBASE
arm64: Add dtb files to archclean rule
Darren Hart [Wed, 21 Jan 2015 18:36:11 +0000 (10:36 -0800)]
Revert "platform: x86: dell-laptop: Add support for keyboard backlight"
This reverts commit
02b2aaaa57ab41504e8d03a3b2ceeb9440a2c188.
This interface was determined to be flawed and required too invasive a
fix for the RC cycle. This will be revisited in 3.20.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Darren Hart [Wed, 21 Jan 2015 18:34:43 +0000 (10:34 -0800)]
Revert "Documentation: Add entry for dell-laptop sysfs interface"
This reverts commit
3161293ba6dfceee9c1efe75185677445def05d4.
This interface was determined to be flawed and required too invasive a
fix for the RC cycle. This will be revisited in 3.20.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Joe Thornber [Fri, 23 Jan 2015 10:16:16 +0000 (10:16 +0000)]
dm cache: fix problematic dual use of a single migration count variable
Introduce a new variable to count the number of allocated migration
structures. The existing variable cache->nr_migrations became
overloaded. It was used to:
i) track of the number of migrations in flight for the purposes of
quiescing during suspend.
ii) to estimate the amount of background IO occuring.
Recent discard changes meant that REQ_DISCARD bios are processed with
a migration. Discards are not background IO so nr_migrations was not
incremented. However this could cause quiescing to complete early.
(i) is now handled with a new variable cache->nr_allocated_migrations.
cache->nr_migrations has been renamed cache->nr_io_migrations.
cleanup_migration() is now called free_io_migration(), since it
decrements that variable.
Also, remove the unused cache->next_migration variable that got replaced
with with prealloc_structs a while ago.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Joe Thornber [Fri, 23 Jan 2015 10:00:07 +0000 (10:00 +0000)]
dm cache: share cache-metadata object across inactive and active DM tables
If a DM table is reloaded with an inactive table when the device is not
suspended (normal procedure for LVM2), then there will be two dm-bufio
objects that can diverge. This can lead to a situation where the
inactive table uses bufio to read metadata at the same time the active
table writes metadata -- resulting in the inactive table having stale
metadata buffers once it is promoted to the active table slot.
Fix this by using reference counting and a global list of cache metadata
objects to ensure there is only one metadata object per metadata device.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Pantelis Antoniou [Fri, 19 Dec 2014 12:34:34 +0000 (14:34 +0200)]
of/unittest: Overlays with sub-devices tests
Introduce selftests for overlays using sub-devices present
in children nodes.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Nadav Amit [Thu, 1 Jan 2015 21:11:11 +0000 (23:11 +0200)]
KVM: x86: SYSENTER emulation is broken
SYSENTER emulation is broken in several ways:
1. It misses the case of 16-bit code segments completely (CVE-2015-0239).
2. MSR_IA32_SYSENTER_CS is checked in 64-bit mode incorrectly (bits 0 and 1 can
still be set without causing #GP).
3. MSR_IA32_SYSENTER_EIP and MSR_IA32_SYSENTER_ESP are not masked in
legacy-mode.
4. There is some unneeded code.
Fix it.
Cc: stable@vger.linux.org
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nadav Amit [Thu, 8 Jan 2015 10:59:03 +0000 (11:59 +0100)]
KVM: x86: Fix of previously incomplete fix for CVE-2014-8480
STR and SLDT with rip-relative operand can cause a host kernel oops.
Mark them as DstMem as well.
Cc: stable@vger.linux.org
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mark Brown [Thu, 22 Jan 2015 20:52:10 +0000 (20:52 +0000)]
arm64: dump: Fix implicit inclusion of definition for PCI_IOBASE
Since
c9465b4ec37a68425 (arm64: add support to dump the kernel page tables)
allmodconfig has failed to build on arm64 as a result of:
../arch/arm64/mm/dump.c:55:20: error: 'PCI_IOBASE' undeclared here (not in a function)
Fix this by explicitly including io.h to ensure that a definition is
present.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Alexandre Demers [Tue, 9 Dec 2014 06:27:50 +0000 (01:27 -0500)]
x86/tsc: Change Fast TSC calibration failed from error to info
Many users see this message when booting without knowning that it is
of no importance and that TSC calibration may have succeeded by
another way.
As explained by Paul Bolle in
http://lkml.kernel.org/r/
1348488259.1436.22.camel@x61.thuisdomein
"Fast TSC calibration failed" should not be considered as an error
since other calibration methods are being tried afterward. At most,
those send a warning if they fail (not an error). So let's change
the message from error to warning.
[ tglx: Make if pr_info. It's really not important at all ]
Fixes:
c767a54ba065 x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1418106470-6906-1-git-send-email-alexandre.f.demers@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Bryan O'Donoghue [Thu, 22 Jan 2015 22:58:49 +0000 (22:58 +0000)]
x86/apic: Re-enable PCI_MSI support for non-SMP X86_32
Commit
0dbc6078c06bc0 ('x86, build, pci: Fix PCI_MSI build on !SMP')
introduced the dependency that X86_UP_APIC is only available when
PCI_MSI is false. This effectively prevents PCI_MSI support on 32bit
UP systems because it disables both APIC and IO-APIC. But APIC support
is architecturally required for PCI_MSI.
The intention of the patch was to enforce APIC support when PCI_MSI is
enabled, but failed to do so.
Remove the !PCI_MSI dependency from X86_UP_APIC and enforce
X86_UP_APIC when PCI_MSI support is enabled on 32bit UP systems.
[ tglx: Massaged changelog ]
Fixes
0dbc6078c06bc0 'x86, build, pci: Fix PCI_MSI build on !SMP'
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1421967529-9037-1-git-send-email-pure.logic@nexus-software.ie
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Juergen Gross [Thu, 22 Jan 2015 11:43:17 +0000 (12:43 +0100)]
x86, mm: Change cachemode exports to non-gpl
Commit
281d4078bec3 ("x86: Make page cache mode a real type")
introduced the symbols __cachemode2pte_tbl and __pte2cachemode_tbl and
exported them via EXPORT_SYMBOL_GPL. The exports are part of a
replacement of code which has been EXPORT_SYMBOL before these changes
resulting in build breakage of out-of-tree non-gpl modules.
Change EXPORT_SYMBOL_GPL to EXPORT-SYMBOL for these two symbols.
Fixes:
281d4078bec3 "x86: Make page cache mode a real type"
Reported-and-tested-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/1421926997-28615-1-git-send-email-jgross@suse.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andy Lutomirski [Thu, 22 Jan 2015 19:27:59 +0000 (11:27 -0800)]
x86, tls: Interpret an all-zero struct user_desc as "no segment"
The Witcher 2 did something like this to allocate a TLS segment index:
struct user_desc u_info;
bzero(&u_info, sizeof(u_info));
u_info.entry_number = (uint32_t)-1;
syscall(SYS_set_thread_area, &u_info);
Strictly speaking, this code was never correct. It should have set
read_exec_only and seg_not_present to 1 to indicate that it wanted
to find a free slot without putting anything there, or it should
have put something sensible in the TLS slot if it wanted to allocate
a TLS entry for real. The actual effect of this code was to
allocate a bogus segment that could be used to exploit espfix.
The set_thread_area hardening patches changed the behavior, causing
set_thread_area to return -EINVAL and crashing the game.
This changes set_thread_area to interpret this as a request to find
a free slot and to leave it empty, which isn't *quite* what the game
expects but should be close enough to keep it working. In
particular, using the code above to allocate two segments will
allocate the same segment both times.
According to FrostbittenKing on Github, this fixes The Witcher 2.
If this somehow still causes problems, we could instead allocate
a limit==0 32-bit data segment, but that seems rather ugly to me.
Fixes:
41bdc78544b8 x86/tls: Validate TLS entries to protect espfix
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: stable@vger.kernel.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/0cb251abe1ff0958b8e468a9a9a905b80ae3a746.1421954363.git.luto@amacapital.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andy Lutomirski [Thu, 22 Jan 2015 19:27:58 +0000 (11:27 -0800)]
x86, tls, ldt: Stop checking lm in LDT_empty
32-bit programs don't have an lm bit in their ABI, so they can't
reliably cause LDT_empty to return true without resorting to memset.
They shouldn't need to do this.
This should fix a longstanding, if minor, issue in all 64-bit kernels
as well as a potential regression in the TLS hardening code.
Fixes:
41bdc78544b8 x86/tls: Validate TLS entries to protect espfix
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/72a059de55e86ad5e2935c80aa91880ddf19d07c.1421954363.git.luto@amacapital.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Dave Hansen [Thu, 8 Jan 2015 22:30:22 +0000 (14:30 -0800)]
x86, mpx: Strictly enforce empty prctl() args
Description from Michael Kerrisk. He suggested an identical patch
to one I had already coded up and tested.
commit
fe3d197f8431 "x86, mpx: On-demand kernel allocation of bounds
tables" added two new prctl() operations, PR_MPX_ENABLE_MANAGEMENT and
PR_MPX_DISABLE_MANAGEMENT. However, no checks were included to ensure
that unused arguments are zero, as is done in many existing prctl()s
and as should be done for all new prctl()s. This patch adds the
required checks.
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Suggested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20150108223022.7F56FD13@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Dave Hansen [Thu, 8 Jan 2015 22:30:21 +0000 (14:30 -0800)]
x86, mpx: Fix potential performance issue on unmaps
The 3.19 merge window saw some TLB modifications merged which caused a
performance regression. They were fixed in commit
045bbb9fa.
Once that fix was applied, I also noticed that there was a small
but intermittent regression still present. It was not present
consistently enough to bisect reliably, but I'm fairly confident
that it came from (my own) MPX patches. The source was reading
a relatively unused field in the mm_struct via arch_unmap.
I also noted that this code was in the main instruction flow of
do_munmap() and probably had more icache impact than we want.
This patch does two things:
1. Adds a static (via Kconfig) and dynamic (via cpuid) check
for MPX with cpu_feature_enabled(). This keeps us from
reading that cacheline in the mm and trades it for a check
of the global CPUID variables at least on CPUs without MPX.
2. Adds an unlikely() to ensure that the MPX call ends up out
of the main instruction flow in do_munmap(). I've added
a detailed comment about why this was done and why we want
it even on systems where MPX is present.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: luto@amacapital.net
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20150108223021.AEEAB987@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Dave Hansen [Thu, 8 Jan 2015 22:30:20 +0000 (14:30 -0800)]
x86, mpx: Explicitly disable 32-bit MPX support on 64-bit kernels
We had originally planned on submitting MPX support in one patch
set. We eventually broke it up in to two pieces for easier
review. One of the features that didn't make the first round
was supporting 32-bit binaries on 64-bit kernels.
Once we split the set up, we never added code to restrict 32-bit
binaries from _using_ MPX on 64-bit kernels.
The 32-bit bounds tables are a different format than the 64-bit
ones. Without this patch, the kernel will try to read a 32-bit
binary's tables as if they were the 64-bit version. They will
likely be noticed as being invalid rather quickly and the app
will get killed, but that's kinda mean.
This patch adds an explicit check, and will make a 64-bit kernel
essentially behave as if it has no MPX support when called from
a 32-bit binary.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave@sr71.net>
Link: http://lkml.kernel.org/r/20150108223020.9E9AA511@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Lucas Stach [Mon, 19 Jan 2015 10:17:31 +0000 (11:17 +0100)]
MAINTAINERS: Update Richard Zhu's email address
The old cryptic address bounces, fix it by using a properly working one.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <Richard.Zhu@freescale.com>
Linus Torvalds [Thu, 22 Jan 2015 18:53:06 +0000 (06:53 +1200)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Five more bug fixes from Michael for the s390 BPF jit"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/bpf: Zero extend parameters before calling C function
s390/bpf: Fix sk_load_byte_msh()
s390/bpf: Fix offset parameter for skb_copy_bits()
s390/bpf: Fix skb_copy_bits() parameter passing
s390/bpf: Fix JMP_JGE_K (A >= K) and JMP_JGT_K (A > K)
Linus Torvalds [Thu, 22 Jan 2015 18:52:14 +0000 (06:52 +1200)]
Merge tag 'nios2-fixes-v3.19-rc6' of git://git.rocketboards.org/linux-socfpga-next
Pull one arch/nios2 fix from Ley Foon Tan:
"Fix kuser trampoline address"
* tag 'nios2-fixes-v3.19-rc6' of git://git.rocketboards.org/linux-socfpga-next:
nios2: fix kuser trampoline address
Linus Torvalds [Thu, 22 Jan 2015 18:40:36 +0000 (06:40 +1200)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/rusty/linux
Pull module and param fixes from Rusty Russell:
"Surprising number of fixes this merge window :(
The first two are minor fallout from the param rework which went in
this merge window.
The next three are a series which fixes a longstanding (but never
previously reported and unlikely , so no CC stable) race between
kallsyms and freeing the init section.
Finally, a minor cleanup as our module refcount will now be -1 during
unload"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
module: make module_refcount() a signed integer.
module: fix race in kallsyms resolution during module load success.
module: remove mod arg from module_free, rename module_memfree().
module_arch_freeing_init(): new hook for archs before module->module_init freed.
param: fix uninitialized read with CONFIG_DEBUG_LOCK_ALLOC
param: initialize store function to NULL if not available.
Tyrel Datwyler [Tue, 13 Jan 2015 00:31:34 +0000 (16:31 -0800)]
MAINTAINERS: ibmvscsi driver maintainer change
Change maintainer of ibmvscsi driver to Tyrel Datwyler.
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tyrel Datwyler [Tue, 13 Jan 2015 00:31:35 +0000 (16:31 -0800)]
MAINTAINERS: ibmvfc driver maintainer change
Change maintainer of ibmvfc driver to Tyrel Datwyler.
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Dave Jiang [Wed, 21 Jan 2015 16:13:41 +0000 (09:13 -0700)]
MAINTAINERS: Remove self as isci maintainer
Removing myself as a maintainer.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Colin Ian King [Thu, 22 Jan 2015 11:20:40 +0000 (11:20 +0000)]
scsi_debug: test always evaluates to false, || should be used instead
cppcheck found the following issue:
(warning) Logical conjunction always evaluates to false:
alloc_len < 4 && alloc_len > 65535.
..the test should be instead:
if (alloc_len < 4 || alloc_len > 65536)
This error was introduced by recent commit
38d5c8336e60bf6e53a1da9
("scsi_debug: add Report supported opcodes+tmfs; Compare and write")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pantelis Antoniou [Tue, 16 Dec 2014 17:45:26 +0000 (19:45 +0200)]
of/platform: Handle of_populate drivers in notifier
When using overlays with drivers calling of_populate the notifier
will try to create the device twice. Using the populated bit
before proceeding protects against this.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Pantelis Antoniou [Tue, 16 Dec 2014 17:45:25 +0000 (19:45 +0200)]
of/overlay: Do not generate duplicate nodes
During the course of the rewrites a bug sneaked in when dealing
with children nodes of overlays, which ends up duplicating
sub nodes.
Simply remove the duplicate traversal of child nodes to fix.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Thomas Gleixner [Thu, 22 Jan 2015 11:26:41 +0000 (12:26 +0100)]
Merge branch 'fortglx/3.19-stable/time' of https://git.linaro.org/people/john.stultz/linux into timers/urgent
Pull urgent fixes from John Stultz:
Two urgent fixes for user triggerable time related overflow issues
Ley Foon Tan [Thu, 22 Jan 2015 09:05:16 +0000 (17:05 +0800)]
nios2: fix kuser trampoline address
__kuser_sigtramp address should be 0x1044 instead of 0x1040.
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Olof Johansson [Thu, 22 Jan 2015 01:15:49 +0000 (17:15 -0800)]
Merge tag 'renesas-soc-fixes2-for-v3.19' of git://git./linux/kernel/git/horms/renesas into fixes
Merge "Second Round of Renesas ARM Based SoC Fixes for v3.19" from Simon
Horman:
* Instantiate GIC from C board code in legacy builds on r8a7778 and r8a7779
* tag 'renesas-soc-fixes2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds
ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds
Signed-off-by: Olof Johansson <olof@lixom.net>
Rusty Russell [Thu, 22 Jan 2015 00:43:14 +0000 (11:13 +1030)]
module: make module_refcount() a signed integer.
James Bottomley points out that it will be -1 during unload. It's
only used for diagnostics, so let's not hide that as it could be a
clue as to what's gone wrong.
Cc: Jason Wessel <jason.wessel@windriver.com>
Acked-and-documention-added-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Masami Hiramatsu <maasami.hiramatsu.pt@hitachi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Sakari Ailus [Thu, 1 Jan 2015 21:13:54 +0000 (18:13 -0300)]
[media] omap3isp: Correctly set QUERYCAP capabilities
device_caps in struct v4l2_capability were inadequately set in
VIDIOC_QUERYCAP. Fix this. Without this a WARN_ON in the v4l2 core
is triggered. This WARN_ON was added for kernel 3.19 exactly to
detect these situations.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 19 Jan 2015 10:14:14 +0000 (07:14 -0300)]
[media] cx23885: fix free interrupt bug
First free the interrupt, then disable the PCI device. The other way
around will lead to this warning:
Jan 19 11:42:02 telek kernel: [ 1440.161234] WARNING: CPU: 0 PID: 2191 at kernel/irq/manage.c:1311 __free_irq+0x97/0x1f0()
Jan 19 11:42:02 telek kernel: [ 1440.161236] Trying to free already-free IRQ 0
Jan 19 11:42:02 telek kernel: [ 1440.161237] Modules linked in: tda8290 tda10048 cx25840 cx23885(-) altera_ci tda18271 altera_stapl videobuf2_dvb tveeprom cx2341x videobuf2_dma_sg dvb_core rc_core videobuf2_memops videobuf2_core v4l2_common videodev media nouveau x86_pkg_temp_thermal cfbfillrect cfbimgblt cfbcopyarea ttm drm_kms_helper processor button isci
Jan 19 11:42:02 telek kernel: [ 1440.161266] CPU: 0 PID: 2191 Comm: rmmod Tainted: G W 3.19.0-rc1-telek #345
Jan 19 11:42:02 telek kernel: [ 1440.161268] Hardware name: ASUSTeK COMPUTER INC. Z9PE-D8 WS/Z9PE-D8 WS, BIOS 5404 02/10/2014
Jan 19 11:42:02 telek kernel: [ 1440.161270]
ffffffff81bf1fce ffff8808958b7cc8 ffffffff8194a97f 0000000000000000
Jan 19 11:42:02 telek kernel: [ 1440.161274]
ffff8808958b7d18 ffff8808958b7d08 ffffffff810c56b0 0000000000000286
Jan 19 11:42:02 telek kernel: [ 1440.161279]
0000000000000000 0000000000000000 ffff88089f808890 ffff88089f808800
Jan 19 11:42:02 telek kernel: [ 1440.161284] Call Trace:
Jan 19 11:42:02 telek kernel: [ 1440.161290] [<
ffffffff8194a97f>] dump_stack+0x4f/0x7b
Jan 19 11:42:02 telek kernel: [ 1440.161295] [<
ffffffff810c56b0>] warn_slowpath_common+0x80/0xc0
Jan 19 11:42:02 telek kernel: [ 1440.161299] [<
ffffffff810c5731>] warn_slowpath_fmt+0x41/0x50
Jan 19 11:42:02 telek kernel: [ 1440.161303] [<
ffffffff81955d36>] ? _raw_spin_lock_irqsave+0x56/0x70
Jan 19 11:42:02 telek kernel: [ 1440.161307] [<
ffffffff81114849>] ? __free_irq+0x49/0x1f0
Jan 19 11:42:02 telek kernel: [ 1440.161311] [<
ffffffff81114897>] __free_irq+0x97/0x1f0
Jan 19 11:42:02 telek kernel: [ 1440.161316] [<
ffffffff81114a88>] free_irq+0x48/0xd0
Jan 19 11:42:02 telek kernel: [ 1440.161323] [<
ffffffffa00e6deb>] cx23885_finidev+0x4b/0x90 [cx23885]
Jan 19 11:42:02 telek kernel: [ 1440.161329] [<
ffffffff814529fa>] pci_device_remove+0x3a/0xc0
Jan 19 11:42:02 telek kernel: [ 1440.161334] [<
ffffffff8153b4ea>] __device_release_driver+0x7a/0xf0
Jan 19 11:42:02 telek kernel: [ 1440.161338] [<
ffffffff8153bc98>] driver_detach+0xc8/0xd0
Jan 19 11:42:02 telek kernel: [ 1440.161341] [<
ffffffff8153b1de>] bus_remove_driver+0x4e/0xb0
Jan 19 11:42:02 telek kernel: [ 1440.161345] [<
ffffffff8153c2eb>] driver_unregister+0x2b/0x60
Jan 19 11:42:02 telek kernel: [ 1440.161349] [<
ffffffff814525c5>] pci_unregister_driver+0x25/0x70
Jan 19 11:42:02 telek kernel: [ 1440.161355] [<
ffffffffa00f6ddc>] cx23885_fini+0x10/0x12 [cx23885]
Jan 19 11:42:02 telek kernel: [ 1440.161360] [<
ffffffff81139a98>] SyS_delete_module+0x1a8/0x1f0
Jan 19 11:42:02 telek kernel: [ 1440.161364] [<
ffffffff819561a9>] system_call_fastpath+0x12/0x17
Jan 19 11:42:02 telek kernel: [ 1440.161367] ---[ end trace
a9c07cb5f3357020 ]---
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 19 Jan 2015 09:23:26 +0000 (06:23 -0300)]
[media] pvrusb2: fix missing device_caps in querycap
The VIDIOC_QUERYCAP function should set device_caps, but this was missing.
In addition, it set the version field as well, but that should be done by
the core, not by the driver.
If a driver doesn't set device_caps the v4l2 core will issue a WARN_ON, so
it's important that this is set correctly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Hans Verkuil [Mon, 19 Jan 2015 09:16:18 +0000 (06:16 -0300)]
[media] vb2: fix vb2_thread_stop race conditions
The locking scheme inside the vb2 thread is unsafe when stopping the
thread. In particular kthread_stop was called *after* internal data
structures were cleaned up instead of doing that before. In addition,
internal vb2 functions were called after threadio->stop was set to
true and vb2_internal_streamoff was called. This is also not allowed.
All this led to a variety of race conditions and kernel warnings and/or
oopses.
Fixed by moving the kthread_stop call up before the cleanup takes
place, and by checking threadio->stop before calling internal vb2
queuing operations.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v3.16 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Nobuhiro Iwamatsu [Wed, 14 Jan 2015 00:55:02 +0000 (21:55 -0300)]
[media] rcar_vin: Update device_caps and capabilities in querycap
The V4L2 API requires both .capabilities and .device_caps fields of
struct v4l2_capability to be set. Otherwise the compliance checker
complains and since commit "v4l2-ioctl: WARN_ON if querycap didn't fill
device_caps" a compile-time warning is issued. Fix this non-compliance
in the rcar_vin driver.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Guennadi Liakhovetski [Sun, 18 Jan 2015 19:30:11 +0000 (16:30 -0300)]
[media] soc-camera: fix device capabilities in multiple camera host drivers
The V4L2 API requires both .capabilities and .device_caps fields of
struct v4l2_capability to be set. Otherwise the compliance checker
complains and since commit "v4l2-ioctl: WARN_ON if querycap didn't fill
device_caps" a compile-time warning is issued. Fix this non-compliance
in several soc-camera camera host drivers.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Jonathan McDowell [Fri, 2 Jan 2015 17:55:17 +0000 (14:55 -0300)]
[media] Fix Mygica T230 support
Commit
2adb177e57417cf8409e86bda2c516e5f99a2099 removed 2 devices
from the cxusb device table but failed to fix up the T230 properties
that follow, meaning that this device no longer gets detected properly.
Adjust the cxusb_table index appropriate so detection works.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Reviewed-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Matthias Schwarzott [Mon, 22 Dec 2014 22:51:39 +0000 (19:51 -0300)]
[media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry
Unconditionally attaching Si2161/Si2165 demod driver
breaks Hauppauge WinTV Starburst.
So create own card entry for this.
Add card name comments to the subsystem ids.
This fixes a regression introduced in 3.17 by
36efec48e2e6016e05364906720a0ec350a5d768 ([media] cx23885: Add si2165 support for HVR-5500)
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Tested-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
CC: stable@vger.kernel.org # for 3.17 and upper
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Mauro Carvalho Chehab [Tue, 23 Dec 2014 17:02:57 +0000 (14:02 -0300)]
[media] tlg2300: Fix media dependencies
X-Patchwork-Delegate: m.chehab@samsung.com
Changeset
ea2e813e8cc3 moved the driver to staging, but it forgot to
preserve the existing dependency.
Fixes:
ea2e813e8cc3 ("[media] tlg2300: move to staging in preparation for removal")
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Linus Torvalds [Wed, 21 Jan 2015 18:26:07 +0000 (06:26 +1200)]
Merge tag 'trace-sh-3.19' of git://git./linux/kernel/git/rostedt/linux-trace
Pull superh tracing fix from Steven Rostedt:
"It's been reported that function tracing does not work on the sh
architecture because gcc 4.8 for superH does not support -m32, and the
recordmcount.pl script adds "-m32" when re-compiling the object files
with the mcount locations.
I was not able to reproduce this problem, as it seems that -m32 works
fine for my cross compiler gcc 4.6.3, but I have to assume that -m32
was deprecated somewhere between 4.6 and 4.8. As it still seems to
compile fine without -m32, I have no reason not to add this patch, as
having -m32 seems to cause trouble for others"
* tag 'trace-sh-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore
Masahiro Yamada [Tue, 20 Jan 2015 03:38:25 +0000 (04:38 +0100)]
ARM: 8292/1: mm: fix size rounding-down of arm_add_memory() function
The current rounding of "size" is wrong:
- If "start" is sufficiently near the next page boundary, "size"
is decremented by more than enough and the last page is lost.
- If "size" is sufficiently small, it is wrapped around and gets
a bogus value.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Wolfram Sang [Sun, 21 Dec 2014 21:14:43 +0000 (22:14 +0100)]
watchdog: drop owner assignment from platform_drivers
This platform_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Markus Pargmann [Mon, 8 Sep 2014 07:14:07 +0000 (09:14 +0200)]
watchdog: imx2_wdt: Disable power down counter on boot
Disable power down counter of the watchdog to avoid system resets. The
watchdog power down counter is set automatically by the chip. If it is
not set to 0 in the driver, the system resets.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Xiubo Li [Thu, 16 Oct 2014 03:44:15 +0000 (11:44 +0800)]
watchdog: imx2_wdt: Improve power management support.
Improve power management operations(suspend and resume) as part of
dev_pm_ops for IMX2 watchdog driver.
If PM will be supported, please make sure that the wdev->clk
could disable the watchdog's counter input clock source or can
mask watchdog's reset request to the core.
If watchdog is still used by consumers and resumes from deep
sleep state, we need to restart the watchdog again without
enabling the timer.
If watchdog been has started --> stopped by the consumers and
resumes from non-deep sleep state, then start the timer again.
If watchdog has been started --> stopped by the consumers and
resumes from deep sleep state, will do nothing. The watchdog
will be restarted by consumers next time to be used.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Linus Torvalds [Wed, 21 Jan 2015 08:37:25 +0000 (20:37 +1200)]
Merge tag 'sound-3.19-rc6' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This batch contains two fixes for FireWire lib module and a quirk for
yet another Logitech WebCam. The former is the fixes for MIDI
handling I forgot to pick up during the merge window. All the fixed
code is pretty local and shouldn't give any regressions"
* tag 'sound-3.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210
ALSA: firewire-lib: limit the MIDI data rate
ALSA: firewire-lib: remove rx_blocks_for_midi quirk
Linus Torvalds [Wed, 21 Jan 2015 08:23:33 +0000 (20:23 +1200)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Just back from LCA + some days off, had some fixes from the past 2 weeks,
Some amdkfd code removal for a feature that wasn't ready, otherwise
just one fix for core helper sleeping, exynos, i915, and radeon fixes.
I thought I had some sti fixes but they were already in, and it
confused me for a few mins this morning"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: fb helper should avoid sleeping in panic context
drm/exynos: fix warning of vblank reference count
drm/exynos: remove unnecessary runtime pm operations
drm/exynos: fix reset codes for memory mapped hdmi phy
drm/radeon: use rv515_ring_start on r5xx
drm/radeon: add si dpm quirk list
drm/radeon: don't print error on -ERESTARTSYS
drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES
drm/i915: Ban Haswell from using RCS flips
drm/i915: vlv: sanitize RPS interrupt mask during GPU idling
drm/i915: fix HW lockup due to missing RPS IRQ workaround on GEN6
drm/i915: gen9: fix RPS interrupt routing to CPU vs. GT
drm/exynos: remove the redundant machine checking code
drm/radeon: add a dpm quirk list
drm/amdkfd: Fix sparse warning (different address space)
drm/radeon: fix VM flush on CIK (v3)
drm/radeon: fix VM flush on SI (v3)
drm/radeon: fix VM flush on cayman/aruba (v3)
drm/amdkfd: Drop interrupt SW ring buffer
Linus Torvalds [Wed, 21 Jan 2015 06:29:44 +0000 (18:29 +1200)]
Merge tag 'mfd-fixes-3.19' of git://git./linux/kernel/git/lee/mfd
Pull MFD fixes from Lee Jones:
- Avoid platform ID collision in da9052
- Skip caching volatile registers in tps65218
- Use correct address base in tps65218
- Repair deadlock on suspend in rtsx_usb
* tag 'mfd-fixes-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: rtsx_usb: Fix runtime PM deadlock
mfd: tps65218: Make INT1 our status_base register
mfd: tps65218: Make INT[12] and STATUS registers volatile
mfd: da9052-core: Fix platform-device id collision
Qu Wenruo [Mon, 19 Jan 2015 07:42:41 +0000 (15:42 +0800)]
btrfs: Don't call btrfs_start_transaction() on frozen fs to avoid deadlock.
Commit
6b5fe46dfa52 (btrfs: do commit in sync_fs if there are pending
changes) will call btrfs_start_transaction() in sync_fs(), to handle
some operations needed to be done in next transaction.
However this can cause deadlock if the filesystem is frozen, with the
following sys_r+w output:
[ 143.255932] Call Trace:
[ 143.255936] [<
ffffffff816c0e09>] schedule+0x29/0x70
[ 143.255939] [<
ffffffff811cb7f3>] __sb_start_write+0xb3/0x100
[ 143.255971] [<
ffffffffa040ec06>] start_transaction+0x2e6/0x5a0
[btrfs]
[ 143.255992] [<
ffffffffa040f1eb>] btrfs_start_transaction+0x1b/0x20
[btrfs]
[ 143.256003] [<
ffffffffa03dc0ba>] btrfs_sync_fs+0xca/0xd0 [btrfs]
[ 143.256007] [<
ffffffff811f7be0>] sync_fs_one_sb+0x20/0x30
[ 143.256011] [<
ffffffff811cbd01>] iterate_supers+0xe1/0xf0
[ 143.256014] [<
ffffffff811f7d75>] sys_sync+0x55/0x90
[ 143.256017] [<
ffffffff816c49d2>] system_call_fastpath+0x12/0x17
[ 143.256111] Call Trace:
[ 143.256114] [<
ffffffff816c0e09>] schedule+0x29/0x70
[ 143.256119] [<
ffffffff816c3405>] rwsem_down_write_failed+0x1c5/0x2d0
[ 143.256123] [<
ffffffff8133f013>] call_rwsem_down_write_failed+0x13/0x20
[ 143.256131] [<
ffffffff811caae8>] thaw_super+0x28/0xc0
[ 143.256135] [<
ffffffff811db3e5>] do_vfs_ioctl+0x3f5/0x540
[ 143.256187] [<
ffffffff811db5c1>] SyS_ioctl+0x91/0xb0
[ 143.256213] [<
ffffffff816c49d2>] system_call_fastpath+0x12/0x17
The reason is like the following:
(Holding s_umount)
VFS sync_fs staff:
|- btrfs_sync_fs()
|- btrfs_start_transaction()
|- sb_start_intwrite()
(Waiting thaw_fs to unfreeze)
VFS thaw_fs staff:
thaw_fs()
(Waiting sync_fs to release
s_umount)
So deadlock happens.
This can be easily triggered by fstest/generic/068 with inode_cache
mount option.
The fix is to check if the fs is frozen, if the fs is frozen, just
return and waiting for the next transaction.
Cc: David Sterba <dsterba@suse.cz>
Reported-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[enhanced comment, changed to SB_FREEZE_WRITE]
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Qu Wenruo [Tue, 20 Jan 2015 09:05:33 +0000 (17:05 +0800)]
btrfs: Fix the bug that fs_info->pending_changes is never cleared.
Fs_info->pending_changes is never cleared since the original code uses
cmpxchg(&fs_info->pending_changes, 0, 0), which will only clear it if
pending_changes is already 0.
This will cause a lot of problem when mount it with inode_cache mount
option.
If the btrfs is mounted as inode_cache, pending_changes will always be
1, even when the fs is frozen.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Dave Airlie [Tue, 20 Jan 2015 23:26:47 +0000 (09:26 +1000)]
Merge tag 'drm-amdkfd-fixes-2015-01-13' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes
- Remove the interrupt SW ring buffer impl. as it is not used by any module
in amdkfd.
- Fix a sparse warning
* tag 'drm-amdkfd-fixes-2015-01-13' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Fix sparse warning (different address space)
drm/amdkfd: Drop interrupt SW ring buffer
Dave Airlie [Tue, 20 Jan 2015 23:26:28 +0000 (09:26 +1000)]
Merge tag 'drm-intel-fixes-2015-01-15' of git://anongit.freedesktop.org/drm-intel into drm-fixes
misc i915 fixes
* tag 'drm-intel-fixes-2015-01-15' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES
drm/i915: Ban Haswell from using RCS flips
drm/i915: vlv: sanitize RPS interrupt mask during GPU idling
drm/i915: fix HW lockup due to missing RPS IRQ workaround on GEN6
drm/i915: gen9: fix RPS interrupt routing to CPU vs. GT
Rui Wang [Mon, 15 Dec 2014 19:28:26 +0000 (11:28 -0800)]
drm: fb helper should avoid sleeping in panic context
There are still some places in the fb helper that need to avoid
sleeping in panic context. Here's an example:
[ 65.615496] bad: scheduling from the idle thread!
[ 65.620747] CPU: 92 PID: 0 Comm: swapper/92 Tainted: G M E 3.18.0-rc4-7-default+ #20
[ 65.630364] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS
BRHSXSD1.86B.0056.R01.
1409242327 09/24/2014
[ 65.641923]
ffff88087f693d80 ffff88087f689878 ffffffff81566db9 0000000000000000
[ 65.650226]
ffff88087f693d80 ffff88087f689898 ffffffff810871ff ffff88046eb3e0d0
[ 65.658527]
ffff88087f693d80 ffff88087f6898c8 ffffffff8107c1fa 000000017f6898b8
[ 65.666830] Call Trace:
[ 65.669557] <#MC> [<
ffffffff81566db9>] dump_stack+0x46/0x58
[ 65.675994] [<
ffffffff810871ff>] dequeue_task_idle+0x2f/0x40
[ 65.682412] [<
ffffffff8107c1fa>] dequeue_task+0x5a/0x80
[ 65.688345] [<
ffffffff810804f3>] deactivate_task+0x23/0x30
[ 65.694569] [<
ffffffff81569050>] __schedule+0x580/0x7f0
[ 65.700502] [<
ffffffff81569739>] schedule_preempt_disabled+0x29/0x70
[ 65.707696] [<
ffffffff8156abb6>] __ww_mutex_lock_slowpath+0xb8/0x162
[ 65.714891] [<
ffffffff8156acb3>] __ww_mutex_lock+0x53/0x85
[ 65.721125] [<
ffffffffa00b3a5d>] drm_modeset_lock+0x3d/0x110 [drm]
[ 65.728132] [<
ffffffffa00b3c2a>] __drm_modeset_lock_all+0x8a/0x120 [drm]
[ 65.735721] [<
ffffffffa00b3cd0>] drm_modeset_lock_all+0x10/0x30 [drm]
[ 65.743015] [<
ffffffffa01af8bf>] drm_fb_helper_pan_display+0x2f/0xf0 [drm_kms_helper]
[ 65.751857] [<
ffffffff8132bd21>] fb_pan_display+0xd1/0x1a0
[ 65.758081] [<
ffffffff81326010>] bit_update_start+0x20/0x50
[ 65.764400] [<
ffffffff813259f2>] fbcon_switch+0x3a2/0x550
[ 65.770528] [<
ffffffff813a01c9>] redraw_screen+0x189/0x240
[ 65.776750] [<
ffffffff81322f8a>] fbcon_blank+0x20a/0x2d0
[ 65.782778] [<
ffffffff8137d359>] ? erst_writer+0x209/0x330
[ 65.789002] [<
ffffffff810ba2f3>] ? internal_add_timer+0x63/0x80
[ 65.795710] [<
ffffffff810bc137>] ? mod_timer+0x127/0x1e0
[ 65.801740] [<
ffffffff813a0cd8>] do_unblank_screen+0xa8/0x1d0
[ 65.808255] [<
ffffffff813a0e10>] unblank_screen+0x10/0x20
[ 65.814381] [<
ffffffff812ca0d9>] bust_spinlocks+0x19/0x40
[ 65.820508] [<
ffffffff81561ca7>] panic+0x106/0x1f5
[ 65.825955] [<
ffffffff8102336c>] mce_panic+0x2ac/0x2e0
[ 65.831789] [<
ffffffff812c796a>] ? delay_tsc+0x4a/0x80
[ 65.837625] [<
ffffffff81024e1f>] do_machine_check+0xbaf/0xbf0
[ 65.844138] [<
ffffffff813365d7>] ? intel_idle+0xc7/0x150
[ 65.850166] [<
ffffffff8156f03f>] machine_check+0x1f/0x30
[ 65.856195] [<
ffffffff813365d7>] ? intel_idle+0xc7/0x150
[ 65.862222] <<EOE>> [<
ffffffff814283d5>] cpuidle_enter_state+0x55/0x170
[ 65.869823] [<
ffffffff814285a7>] cpuidle_enter+0x17/0x20
[ 65.875852] [<
ffffffff81097b08>] cpu_startup_entry+0x2d8/0x370
[ 65.882467] [<
ffffffff8102fe29>] start_secondary+0x159/0x180
There's __drm_modeset_lock_all() which Daniel Vetter introduced for this
purpose. We can leverage that without reinventing anything. This patch
works with the latest kernel.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 20 Jan 2015 23:25:19 +0000 (09:25 +1000)]
Merge branch 'exynos-drm-fixes' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes
This pull request includes below fixups,
- Remove duplicated machine checking.
. It seems that this code was added when you merged 'v3.18-rc7' into
drm-next. commit id :
e8115e79aa62b6ebdb3e8e61ca4092cc32938afc
- Fix hdmiphy reset.
. Exynos hdmi has two interfaces to control hdmyphy, one is I2C, other
is APB bus - memory mapped I/O. So this patch makes hdmiphy reset
to be done according to interfaces, I2C or APB bus.
- And add some exception codes.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: fix warning of vblank reference count
drm/exynos: remove unnecessary runtime pm operations
drm/exynos: fix reset codes for memory mapped hdmi phy
drm/exynos: remove the redundant machine checking code
Dave Airlie [Tue, 20 Jan 2015 23:21:32 +0000 (09:21 +1000)]
Merge branch 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Some radeon fixes for 3.19:
- GPUVM stability fixes
- SI dpm quirks
- Regression fixes
* 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: use rv515_ring_start on r5xx
drm/radeon: add si dpm quirk list
drm/radeon: don't print error on -ERESTARTSYS
drm/radeon: add a dpm quirk list
drm/radeon: fix VM flush on CIK (v3)
drm/radeon: fix VM flush on SI (v3)
drm/radeon: fix VM flush on cayman/aruba (v3)
Linus Torvalds [Tue, 20 Jan 2015 19:54:16 +0000 (07:54 +1200)]
Merge branch 'for-3.19-fixes' of git://git./linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
- Bartlomiej will be co-maintaining PATA portion of libata. git
workflow will stay the same.
- sata_sil24 wasn't happy with tag ordered submission. An option to
restore the old tag allocation behavior is implemented for sil24.
- a very old race condition in PIO host state machine which can trigger
BUG fixed.
- other driver-specific changes
* 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: prevent HSM state change race between ISR and PIO
libata: allow sata_sil24 to opt-out of tag ordered submission
ata: pata_at91: depend on !ARCH_MULTIPLATFORM
ahci: Remove Device ID for Intel Sunrise Point PCH
ahci: Use dev_info() to inform about the lack of Device Sleep support
libata: Whitelist SSDs that are known to properly return zeroes after TRIM
sata_dwc_460ex: fix resource leak on error path
ata: add MAINTAINERS entry for libata PATA drivers
libata: clean up MAINTAINERS entries
libata: export ata_get_cmd_descript()
ahci_xgene: Fix the DMA state machine lockup for the ATA_CMD_PACKET PIO mode command.
ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller driver.
Linus Torvalds [Tue, 20 Jan 2015 19:51:46 +0000 (07:51 +1200)]
Merge branch 'for-3.19-fixes' of git://git./linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
"The xfs folks have been running into weird and very rare lockups for
some time now. I didn't think this could have been from workqueue
side because no one else was reporting it. This time, Eric had a
kdump which we looked into and it turned out this actually was a
workqueue bug and the bug has been there since the beginning of
concurrency managed workqueue.
A worker pool ensures forward progress of the workqueues associated
with it by always having at least one worker reserved from executing
work items. When the pool is under contention, the idle one tries to
create more workers for the pool and if that doesn't succeed quickly
enough, it calls the rescuers to the pool.
This logic had a subtle race condition in an early exit path. When a
worker invokes this manager function, the function may return %false
indicating that the caller may proceed to executing work items either
because another worker is already performing the role or conditions
have changed and the pool is no longer under contention.
The latter part depended on the assumption that whether more workers
are necessary or not remains stable while the pool is locked; however,
pool->nr_running (concurrency count) may change asynchronously and it
getting bumped from zero asynchronously could send off the last idle
worker to execute work items.
The race window is fairly narrow, and, even when it gets triggered,
the pool deadlocks iff if all work items get blocked on pending work
items of the pool, which is highly unlikely but can be triggered by
xfs.
The patch removes the race window by removing the early exit path,
which doesn't server any purpose anymore anyway"
* 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix subtle pool management issue which can stall whole worker_pool
Ming Lei [Tue, 20 Jan 2015 03:00:56 +0000 (11:00 +0800)]
blk-mq: fix hctx/ctx kobject use-after-free
The kobject memory shouldn't have been freed before the kobject
is released because driver core can access it freely before its
release.
This patch frees hctx in its release callback. For ctx, they
share one single per-cpu variable which is associated with
the request queue, so free ctx in q->mq_kobj's release handler.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
(fix ctx kobjects)
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
K. Y. Srinivasan [Tue, 13 Jan 2015 00:26:02 +0000 (16:26 -0800)]
x86, hyperv: Mark the Hyper-V clocksource as being continuous
The Hyper-V clocksource is continuous; mark it accordingly.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: jasowang@redhat.com
Cc: gregkh@linuxfoundation.org
Cc: devel@linuxdriverproject.org
Cc: olaf@aepfle.de
Cc: apw@canonical.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1421108762-3331-1-git-send-email-kys@microsoft.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Juergen Gross [Mon, 12 Jan 2015 05:15:45 +0000 (06:15 +0100)]
x86: Don't rely on VMWare emulating PAT MSR correctly
VMWare seems not to emulate the PAT MSR correctly: reaeding
MSR_IA32_CR_PAT returns 0 even after writing another value to it.
Commit
bd809af16e3ab triggers this VMWare bug when the kernel is
booted as a VMWare guest.
Detect this bug and don't use the read value if it is 0.
Fixes:
bd809af16e3ab "x86: Enable PAT to use cache mode translation tables"
Reported-and-tested-by: Jongman Heo <jongman.heo@samsung.com>
Acked-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: http://lkml.kernel.org/r/1421039745-14335-1-git-send-email-jgross@suse.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Roger Tseng [Thu, 15 Jan 2015 07:14:44 +0000 (15:14 +0800)]
mfd: rtsx_usb: Fix runtime PM deadlock
sd_set_power_mode() in derived module drivers/mmc/host/rtsx_usb_sdmmc.c
acquires dev_mutex and then calls pm_runtime_get_sync() to make sure the
device is awake while initializing a newly inserted card. Once it is
called during suspending state and explicitly before rtsx_usb_suspend()
acquires the same dev_mutex, both routine deadlock and further hang the
driver because pm_runtime_get_sync() waits the pending PM operations.
Fix this by using an empty suspend method. mmc_core always turns the
LED off after a request is done and thus it is ok to remove the only
rtsx_usb_turn_off_led() here.
Cc: <stable@vger.kernel.org> # v3.16+
Fixes:
730876be2566 ("mfd: Add realtek USB card reader driver")
Signed-off-by: Roger Tseng <rogerable@realtek.com>
[Lee: Removed newly unused variable]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Felipe Balbi [Fri, 26 Dec 2014 19:28:21 +0000 (13:28 -0600)]
mfd: tps65218: Make INT1 our status_base register
If we don't tell regmap-irq that our first status
register is at offset 1, it will try to read offset
zero, which is the chipid register.
Fixes:
44b4dc6 mfd: tps65218: Add driver for the TPS65218 PMIC
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Felipe Balbi [Fri, 26 Dec 2014 19:28:20 +0000 (13:28 -0600)]
mfd: tps65218: Make INT[12] and STATUS registers volatile
STATUS register can be modified by the HW, so we
should bypass cache because of that.
In the case of INT[12] registers, they are the ones
that actually clear the IRQ source at the time they
are read. If we rely on the cache for them, we will
never be able to clear the interrupt, which will cause
our IRQ line to be disabled due to IRQ throttling.
Fixes:
44b4dc6 mfd: tps65218: Add driver for the TPS65218 PMIC
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Fabio Estevam [Wed, 10 Dec 2014 01:39:53 +0000 (23:39 -0200)]
mfd: da9052-core: Fix platform-device id collision
Allow multiple DA9052 regulators be registered by registering with
PLATFORM_DEVID_AUTO instead of PLATFORM_DEVID_NONE.
The subdevices are currently registered with PLATFORM_DEVID_NONE, which
will cause a name collision on the platform bus when multiple regulators
are registered:
[ 0.128855] da9052-regulator da9052-regulator: invalid regulator ID specified
[ 0.128973] da9052-regulator: probe of da9052-regulator failed with error -22
[ 0.129148] ------------[ cut here ]------------
[ 0.129200] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5c/0x7c()
[ 0.129233] sysfs: cannot create duplicate filename '/devices/platform/soc/
60000000.aips/
63fc8000.i2c/i2c-0/0-0048/da9052-regulator
...
[ 0.132891] ------------[ cut here ]------------
[ 0.132924] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x24c/0x2cc()
[ 0.132957] kobject_add_internal failed for da9052-regulator with -EEXIST, don't try to register things with the same name in the same directory.
...
[ 0.137000] da9052 0-0048: mfd_add_devices failed: -17
[ 0.138486] da9052: probe of 0-0048 failed with error -17
Based on the fix done by Johan Hovold at commit
b6684228726cc255 ("mfd:
viperboard: Fix platform-device id collision").
Tested on a imx53-qsb board, where multiple DA9053 regulators can be
successfully probed.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Jan Beulich [Fri, 16 Jan 2015 15:47:07 +0000 (15:47 +0000)]
x86, irq: Properly tag virtualization entry in /proc/interrupts
The mis-naming likely was a copy-and-paste effect.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/54B9408B0200007800055E8B@mail.emea.novell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Kees Cook [Fri, 16 Jan 2015 00:51:46 +0000 (16:51 -0800)]
x86, boot: Skip relocs when load address unchanged
On 64-bit, relocation is not required unless the load address gets
changed. Without this, relocations do unexpected things when the kernel
is above 4G.
Reported-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Thomas D. <whissi@whissi.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Junjie Mao <eternal.n08@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20150116005146.GA4212@www.outflux.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Jungseok Lee [Mon, 19 Jan 2015 14:57:00 +0000 (14:57 +0000)]
arm64: Add dtb files to archclean rule
As dts files have been reorganised under vendor subdirs, dtb files
cannot be removed with "make distclean" now. Thus, this patch moves
dtb files under archclean rule and removes unnecessary entries.
Cc: Robert Richter <rrichter@cavium.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Jiang Liu [Tue, 20 Jan 2015 02:21:07 +0000 (10:21 +0800)]
x86/xen: Override ACPI IRQ management callback __acpi_unregister_gsi
Xen overrides __acpi_register_gsi and leaves __acpi_unregister_gsi as is.
That means, an IRQ allocated by acpi_register_gsi_xen_hvm() or
acpi_register_gsi_xen() will be freed by acpi_unregister_gsi_ioapic(),
which may cause undesired effects. So override __acpi_unregister_gsi to
NULL for safety.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Tony Luck <tony.luck@intel.com>
Cc: xen-devel@lists.xenproject.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Graeme Gregory <graeme.gregory@linaro.org>
Cc: Lv Zheng <lv.zheng@intel.com>
Link: http://lkml.kernel.org/r/1421720467-7709-4-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Jiang Liu [Tue, 20 Jan 2015 02:21:06 +0000 (10:21 +0800)]
ACPI: pci: Do not clear pci_dev->irq in acpi_pci_irq_disable()
Xen pciback driver assumes that pci_dev->irq won't change after calling
pci_disable_device(). But commit
cffe0a2b5a34c95a4dadc9ec7132690a5b0f6687
("x86, irq: Keep balance of IOAPIC pin reference count") frees irq
resources and resets pci_dev->irq to zero when pci_disable_device() is
called.
So this is a hotfix for 3.19 to avoid resetting pci_dev->irq, and
another proper fix will be prepared for next merging window.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/1421720467-7709-3-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>