OSDN Git Service
Junio C Hamano [Wed, 26 Oct 2016 20:14:46 +0000 (13:14 -0700)]
Merge branch 'jk/upload-pack-use-prio-queue'
Code clean-up and performance improvement to reduce use of
timestamp-ordered commit-list by replacing it with a priority
queue.
* jk/upload-pack-use-prio-queue:
upload-pack: use priority queue in reachable() check
Junio C Hamano [Wed, 26 Oct 2016 20:14:45 +0000 (13:14 -0700)]
Merge branch 'ab/gitweb-abbrev-links'
In addition to purely abbreviated commit object names, "gitweb"
learned to turn "git describe" output (e.g.
v2.9.3-599-g2376d31787)
into clickable links in its output.
* ab/gitweb-abbrev-links:
gitweb: link to "git describe"'d commits in log messages
gitweb: link to 7-char+ SHA-1s, not only 8-char+
gitweb: fix a typo in a comment
Junio C Hamano [Wed, 26 Oct 2016 20:14:45 +0000 (13:14 -0700)]
Merge branch 'dk/worktree-dup-checkout-with-bare-is-ok'
In a worktree connected to a repository elsewhere, created via "git
worktree", "git checkout" attempts to protect users from confusion
by refusing to check out a branch that is already checked out in
another worktree. However, this also prevented checking out a
branch, which is designated as the primary branch of a bare
reopsitory, in a worktree that is connected to the bare
repository. The check has been corrected to allow it.
* dk/worktree-dup-checkout-with-bare-is-ok:
worktree: allow the main brach of a bare repository to be checked out
Junio C Hamano [Wed, 26 Oct 2016 20:14:45 +0000 (13:14 -0700)]
Merge branch 'mg/gpg-richer-status'
The GPG verification status shown in "%G?" pretty format specifier
was not rich enough to differentiate a signature made by an expired
key, a signature made by a revoked key, etc. New output letters
have been assigned to express them.
* mg/gpg-richer-status:
gpg-interface: use more status letters
Junio C Hamano [Wed, 26 Oct 2016 20:14:45 +0000 (13:14 -0700)]
Merge branch 'jc/cocci-xstrdup-or-null'
Code cleanup.
* jc/cocci-xstrdup-or-null:
cocci: refactor common patterns to use xstrdup_or_null()
Junio C Hamano [Wed, 26 Oct 2016 20:14:45 +0000 (13:14 -0700)]
Merge branch 'mm/credential-libsecret'
A new credential helper that talks via "libsecret" with
implementations of XDG Secret Service API has been added to
contrib/credential/.
* mm/credential-libsecret:
contrib: add credential helper for libsecret
Junio C Hamano [Wed, 26 Oct 2016 20:14:44 +0000 (13:14 -0700)]
Merge branch 'bw/ls-files-recurse-submodules'
"git ls-files" learned "--recurse-submodules" option that can be
used to get a listing of tracked files across submodules (i.e. this
only works with "--cached" option, not for listing untracked or
ignored files). This would be a useful tool to sit on the upstream
side of a pipe that is read with xargs to work on all working tree
files from the top-level superproject.
* bw/ls-files-recurse-submodules:
ls-files: add pathspec matching for submodules
ls-files: pass through safe options for --recurse-submodules
ls-files: optionally recurse into submodules
git: make super-prefix option
Junio C Hamano [Wed, 26 Oct 2016 20:14:44 +0000 (13:14 -0700)]
Merge branch 'js/libify-require-clean-work-tree'
The require_clean_work_tree() helper was recreated in C when "git
pull" was rewritten from shell; the helper is now made available to
other callers in preparation for upcoming "rebase -i" work.
* js/libify-require-clean-work-tree:
wt-status: begin error messages with lower-case
wt-status: teach has_{unstaged,uncommitted}_changes() about submodules
wt-status: export also the has_un{staged,committed}_changes() functions
wt-status: make the require_clean_work_tree() function reusable
pull: make code more similar to the shell script again
pull: drop confusing prefix parameter of die_on_unclean_work_tree()
Junio C Hamano [Wed, 26 Oct 2016 20:14:43 +0000 (13:14 -0700)]
Merge branch 'jc/ws-error-highlight'
"git diff/log --ws-error-highlight=<kind>" lacked the corresponding
configuration variable to set it by default.
* jc/ws-error-highlight:
diff: introduce diff.wsErrorHighlight option
diff.c: move ws-error-highlight parsing helpers up
diff.c: refactor parse_ws_error_highlight()
t4015: split out the "setup" part of ws-error-highlight test
Junio C Hamano [Wed, 26 Oct 2016 20:14:42 +0000 (13:14 -0700)]
Merge branch 'jc/diff-unique-abbrev-comments'
A bit more comments in a tricky code.
* jc/diff-unique-abbrev-comments:
diff_unique_abbrev(): document its assumption and limitation
Junio C Hamano [Mon, 17 Oct 2016 20:52:26 +0000 (13:52 -0700)]
Sync with maint
* maint:
l10n: de.po: translate 260 new messages
l10n: de.po: fix translation of autostash
l10n: ru.po: update Russian translation
Junio C Hamano [Mon, 17 Oct 2016 20:27:38 +0000 (13:27 -0700)]
Merge tag 'l10n-2.10.0-rnd2.4' of git://github.com/git-l10n/git-po into maint
l10n-2.10.0-rnd2.4
* tag 'l10n-2.10.0-rnd2.4' of git://github.com/git-l10n/git-po:
l10n: de.po: translate 260 new messages
l10n: de.po: fix translation of autostash
l10n: ru.po: update Russian translation
Junio C Hamano [Mon, 17 Oct 2016 20:26:27 +0000 (13:26 -0700)]
Tenth batch for 2.11
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 17 Oct 2016 20:25:23 +0000 (13:25 -0700)]
Merge branch 'sb/submodule-config-doc-drop-path'
The "submodule.<name>.path" stored in .gitmodules is never copied
to .git/config and such a key in .git/config has no meaning, but
the documentation described it and submodule.<name>.url next to
each other as if both belong to .git/config. This has been fixed.
* sb/submodule-config-doc-drop-path:
documentation: improve submodule.<name>.{url, path} description
Junio C Hamano [Mon, 17 Oct 2016 20:25:23 +0000 (13:25 -0700)]
Merge branch 'rs/pretty-format-color-doc-fix'
* rs/pretty-format-color-doc-fix:
pretty: fix document link for color specification
Junio C Hamano [Mon, 17 Oct 2016 20:25:22 +0000 (13:25 -0700)]
Merge branch 'js/reset-usage'
* js/reset-usage:
reset: fix usage
Junio C Hamano [Mon, 17 Oct 2016 20:25:21 +0000 (13:25 -0700)]
Merge branch 'da/mergetool-diff-order'
"git mergetool" learned to honor "-O<orderfile>" to control the
order of paths to present to the end user.
* da/mergetool-diff-order:
mergetool: honor -O<orderfile>
mergetool: honor diff.orderFile
mergetool: move main program flow into a main() function
mergetool: add copyright
Junio C Hamano [Mon, 17 Oct 2016 20:25:21 +0000 (13:25 -0700)]
Merge branch 'rs/cocci'
Code cleanup.
* rs/cocci:
use strbuf_add_unique_abbrev() for adding short hashes, part 3
remove unnecessary NULL check before free(3)
Junio C Hamano [Mon, 17 Oct 2016 20:25:21 +0000 (13:25 -0700)]
Merge branch 'js/regexec-buf'
* js/regexec-buf:
configure.ac: improve description of NO_REGEX test
Junio C Hamano [Mon, 17 Oct 2016 20:25:20 +0000 (13:25 -0700)]
Merge branch 'jk/ref-symlink-loop'
A stray symbolic link in $GIT_DIR/refs/ directory could make name
resolution loop forever, which has been corrected.
* jk/ref-symlink-loop:
files_read_raw_ref: prevent infinite retry loops in general
files_read_raw_ref: avoid infinite loop on broken symlinks
Junio C Hamano [Mon, 17 Oct 2016 20:25:20 +0000 (13:25 -0700)]
Merge branch 'jk/quarantine-received-objects'
In order for the receiving end of "git push" to inspect the
received history and decide to reject the push, the objects sent
from the sending end need to be made available to the hook and
the mechanism for the connectivity check, and this was done
traditionally by storing the objects in the receiving repository
and letting "git gc" to expire it. Instead, store the newly
received objects in a temporary area, and make them available by
reusing the alternate object store mechanism to them only while we
decide if we accept the check, and once we decide, either migrate
them to the repository or purge them immediately.
* jk/quarantine-received-objects:
tmp-objdir: do not migrate files starting with '.'
tmp-objdir: put quarantine information in the environment
receive-pack: quarantine objects until pre-receive accepts
tmp-objdir: introduce API for temporary object directories
check_connected: accept an env argument
Junio C Hamano [Mon, 17 Oct 2016 20:25:19 +0000 (13:25 -0700)]
Merge branch 'jk/alt-odb-cleanup'
Codepaths involved in interacting alternate object store have
been cleaned up.
* jk/alt-odb-cleanup:
alternates: use fspathcmp to detect duplicates
sha1_file: always allow relative paths to alternates
count-objects: report alternates via verbose mode
fill_sha1_file: write into a strbuf
alternates: store scratch buffer as strbuf
fill_sha1_file: write "boring" characters
alternates: use a separate scratch space
alternates: encapsulate alt->base munging
alternates: provide helper for allocating alternate
alternates: provide helper for adding to alternates list
link_alt_odb_entry: refactor string handling
link_alt_odb_entry: handle normalize_path errors
t5613: clarify "too deep" recursion tests
t5613: do not chdir in main process
t5613: whitespace/style cleanups
t5613: use test_must_fail
t5613: drop test_valid_repo function
t5613: drop reachable_via function
Junio C Hamano [Mon, 17 Oct 2016 20:25:19 +0000 (13:25 -0700)]
Merge branch 'nd/commit-p-doc'
Documentation for "git commit" was updated to clarify that "commit
-p <paths>" adds to the current contents of the index to come up
with what to commit.
* nd/commit-p-doc:
git-commit.txt: clarify --patch mode with pathspec
Junio C Hamano [Mon, 17 Oct 2016 20:25:18 +0000 (13:25 -0700)]
Merge branch 'jk/clone-copy-alternates-fix'
"git clone" of a local repository can be done at the filesystem
level, but the codepath did not check errors while copying and
adjusting the file that lists alternate object stores.
* jk/clone-copy-alternates-fix:
clone: detect errors in normalize_path_copy
Junio C Hamano [Mon, 17 Oct 2016 20:25:18 +0000 (13:25 -0700)]
Merge branch 'dt/http-empty-auth'
http.emptyauth configuration is a way to allow an empty username to
pass when attempting to authenticate using mechanisms like
Kerberos. We took an unspecified (NULL) username and sent ":"
(i.e. no username, no password) to CURLOPT_USERPWD, but did not do
the same when the username is explicitly set to an empty string.
* dt/http-empty-auth:
http: http.emptyauth should allow empty (not just NULL) usernames
Jiang Xin [Sun, 16 Oct 2016 12:11:41 +0000 (20:11 +0800)]
Merge branch 'russian-l10n' of https://github.com/DJm00n/git-po-ru
* 'russian-l10n' of https://github.com/DJm00n/git-po-ru:
l10n: ru.po: update Russian translation
Ævar Arnfjörð Bjarmason [Thu, 6 Oct 2016 09:11:35 +0000 (09:11 +0000)]
gitweb: link to "git describe"'d commits in log messages
Change the log formatting function to know about "git describe" output
such as "
v2.8.0-4-g867ad08", in addition to just plain "
867ad08".
There are still many valid refnames that we don't link to
e.g. v2.10.0-rc1~2^2~1 is also a valid way to refer to
v2.8.0-4-g867ad08, but I'm not supporting that with this commit,
similarly it's trivially possible to create some refnames like
"æ/
var-gf6727b0" or which won't be picked up by this regex.
There's surely room for improvement here, but I just wanted to address
the very common case of sticking "git describe" output into commit
messages without trying to link to all possible refnames, that's going
to be a rather futile exercise given that this is free text, and it
would be prohibitively expensive to look up whether the references in
question exist in our repository.
There was on-list discussion about how we could do better than this
patch. Junio suggested to update parse_commits() to call a new
"gitweb--helper" command which would pass each of the revision
candidates through "rev-parse --verify --quiet". That would cut down
on our false positives (e.g. we'll link to "
deadbeef"), and also allow
us to be more aggressive in selecting candidate revisions.
That may be too expensive to work in practice, or it may
not. Investigating that would be a good follow-up to this patch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ævar Arnfjörð Bjarmason [Thu, 6 Oct 2016 09:11:34 +0000 (09:11 +0000)]
gitweb: link to 7-char+ SHA-1s, not only 8-char+
Change the minimum length of an abbreviated object identifier in the
commit message gitweb tries to turn into link from 8 hexchars to 7.
This arbitrary minimum length of 8 was introduced in
bfe2191 ("gitweb:
SHA-1 in commit log message links to "object" view", 2006-12-10), but
the default abbreviation length is 7, and has been for a long time.
It's still possible to reference SHA-1s down to 4 characters in length,
see
v1.7.4-1-gdce9648's MINIMUM_ABBREV, but I can't see how to make
git actually produce that, so I doubt anyone is putting that into log
messages in practice, but people definitely do put 7 character SHA-1s
into log messages.
I think it's fairly dubious to link to things matching [0-9a-fA-F]
here as opposed to just [0-9a-f], that dates back to the initial
version of gitweb from
161332a ("first working version",
2005-08-07). Git will accept all-caps SHA-1s, but didn't ever produce
them as far as I can tell.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ævar Arnfjörð Bjarmason [Thu, 6 Oct 2016 09:11:33 +0000 (09:11 +0000)]
gitweb: fix a typo in a comment
Change a typo'd MIME type in a comment. The Content-Type is
application/xhtml+xml, not application/xhtm+xml.
Fixes up code originally added in
53c4031 ("gitweb: Strip
non-printable characters from syntax highlighter output", 2011-09-16).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dennis Kaarsemaker [Wed, 12 Oct 2016 16:41:07 +0000 (18:41 +0200)]
worktree: allow the main brach of a bare repository to be checked out
In bare repositories, get_worktrees() still returns the main repository,
so git worktree list can show it. ignore it in find_shared_symref so we
can still check out the main branch.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 12 Oct 2016 18:20:23 +0000 (11:20 -0700)]
cocci: refactor common patterns to use xstrdup_or_null()
d64ea0f83b ("git-compat-util: add xstrdup_or_null helper",
2015-01-12) added a handy wrapper that allows us to get a duplicate
of a string or NULL if the original is NULL, but a handful of
codepath predate its introduction or just weren't aware of it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Wed, 12 Oct 2016 13:04:15 +0000 (15:04 +0200)]
gpg-interface: use more status letters
According to gpg2's doc/DETAILS:
For each signature only one of the codes GOODSIG, BADSIG,
EXPSIG, EXPKEYSIG, REVKEYSIG or ERRSIG will be emitted.
gpg1 ("classic") behaves the same (although doc/DETAILS differs).
Currently, we parse gpg's status output for GOODSIG, BADSIG and
trust information and translate that into status codes G, B, U, N
for the %G? format specifier.
git-verify-* returns success in the GOODSIG case only. This is
somewhat in disagreement with gpg, which considers the first 5 of
the 6 above as VALIDSIG, but we err on the very safe side.
Introduce additional status codes E, X, Y, R for ERRSIG, EXPSIG,
EXPKEYSIG, and REVKEYSIG so that a user of %G? gets more information
about the absence of a 'G' on first glance.
Requested-by: Alex <agrambot@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ralf Thielow [Wed, 12 Oct 2016 16:31:13 +0000 (18:31 +0200)]
l10n: de.po: translate 260 new messages
Translate 260 new message came from git.pot updates in
9fa976f (l10n:
git.pot: v2.10.0 round 1 (248 new, 56 removed)) and
5bd166d (l10n:
git.pot: v2.10.0 round 2 (12 new, 44 removed)).
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Matthias Rüster <matthias.ruester@gmail.com>
Junio C Hamano [Tue, 11 Oct 2016 21:55:48 +0000 (14:55 -0700)]
Sync with maint
* maint:
Start preparing for 2.10.2
Jeff King [Tue, 11 Oct 2016 21:20:16 +0000 (17:20 -0400)]
upload-pack: use priority queue in reachable() check
Like a lot of old commit-traversal code, this keeps a
commit_list in commit-date order, and and inserts parents
into the list. This means each insertion is potentially
linear, and the whole thing is quadratic (though the exact
runtime depends on the relationship between the commit dates
and the parent topology).
These days we have a priority queue, which can do the same
thing with a much better worst-case time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 11 Oct 2016 21:24:02 +0000 (14:24 -0700)]
Start preparing for 2.10.2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 11 Oct 2016 21:21:35 +0000 (14:21 -0700)]
Merge branch 'jk/verify-packfile-gently' into maint
A low-level function verify_packfile() was meant to show errors
that were detected without dying itself, but under some conditions
it didn't and died instead, which has been fixed.
* jk/verify-packfile-gently:
verify_packfile: check pack validity before accessing data
Junio C Hamano [Tue, 11 Oct 2016 21:21:17 +0000 (14:21 -0700)]
Merge branch 'jc/worktree-config' into maint
"git worktree", even though it used the default_abbrev setting that
ought to be affected by core.abbrev configuration variable, ignored
the variable setting. The command has been taught to read the
default set of configuration variables to correct this.
* jc/worktree-config:
worktree: honor configuration variables
Junio C Hamano [Tue, 11 Oct 2016 21:21:03 +0000 (14:21 -0700)]
Merge branch 'jc/verify-loose-object-header' into maint
Codepaths that read from an on-disk loose object were too loose in
validating what they are reading is a proper object file and
sometimes read past the data they read from the disk, which has
been corrected. H/t to Gustavo Grieco for reporting.
* jc/verify-loose-object-header:
unpack_sha1_header(): detect malformed object header
streaming: make sure to notice corrupt object
Junio C Hamano [Tue, 11 Oct 2016 21:20:37 +0000 (14:20 -0700)]
Merge branch 'rs/git-gui-use-modern-git-merge-syntax' into maint
The original command line syntax for "git merge", which was "git
merge <msg> HEAD <parent>...", has been deprecated for quite some
time, and "git gui" was the last in-tree user of the syntax. This
is finally fixed, so that we can move forward with the deprecation.
* rs/git-gui-use-modern-git-merge-syntax:
git-gui: stop using deprecated merge syntax
Junio C Hamano [Tue, 11 Oct 2016 21:20:31 +0000 (14:20 -0700)]
Merge branch 'kd/mailinfo-quoted-string' into maint
An author name, that spelled a backslash-quoted double quote in the
human readable part "My \"double quoted\" name", was not unquoted
correctly while applying a patch from a piece of e-mail.
* kd/mailinfo-quoted-string:
mailinfo: unescape quoted-pair in header fields
t5100-mailinfo: replace common path prefix with variable
Junio C Hamano [Tue, 11 Oct 2016 21:20:05 +0000 (14:20 -0700)]
Merge branch 'pb/rev-list-reverse-with-count' into maint
Doc update to clarify what "log -3 --reverse" does.
* pb/rev-list-reverse-with-count:
rev-list-options: clarify the usage of --reverse
Junio C Hamano [Tue, 11 Oct 2016 21:19:52 +0000 (14:19 -0700)]
Merge branch 'jc/blame-abbrev' into maint
Almost everybody uses DEFAULT_ABBREV to refer to the default
setting for the abbreviation, but "git blame" peeked into
underlying variable bypassing the macro for no good reason.
* jc/blame-abbrev:
blame: use DEFAULT_ABBREV macro
Junio C Hamano [Tue, 11 Oct 2016 21:19:03 +0000 (14:19 -0700)]
Merge branch 'jk/graph-padding-fix' into maint
The "graph" API used in "git log --graph" miscounted the number of
output columns consumed so far when drawing a padding line, which
has been fixed; this did not affect any existing code as nobody
tried to write anything after the padding on such a line, though.
* jk/graph-padding-fix:
graph: fix extra spaces in graph_padding_line
Junio C Hamano [Tue, 11 Oct 2016 21:18:57 +0000 (14:18 -0700)]
Merge branch 'sg/ref-filter-parse-optim' into maint
The code that parses the format parameter of for-each-ref command
has seen a micro-optimization.
* sg/ref-filter-parse-optim:
ref-filter: strip format option after a field name only once while parsing
Junio C Hamano [Tue, 11 Oct 2016 21:18:32 +0000 (14:18 -0700)]
Merge branch 'rs/copy-array' into maint
Code cleanup.
* rs/copy-array:
use COPY_ARRAY
add COPY_ARRAY
Junio C Hamano [Tue, 11 Oct 2016 21:17:52 +0000 (14:17 -0700)]
Merge branch 'dt/mailinfo' into maint
* dt/mailinfo:
add David Turner's Two Sigma address
Mantas Mikulėnas [Sun, 9 Oct 2016 12:34:17 +0000 (15:34 +0300)]
contrib: add credential helper for libsecret
This is based on the existing gnome-keyring helper, but instead of
libgnome-keyring (which was specific to GNOME and is deprecated), it
uses libsecret which can support other implementations of XDG Secret
Service API.
Passes t0303-credential-external.sh.
Signed-off-by: Mantas Mikulėnas <grawity@gmail.com>
Reviewed-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Tue, 11 Oct 2016 16:09:03 +0000 (18:09 +0200)]
reset: fix usage
The <tree-ish> parameter is actually optional (see man page).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Tue, 11 Oct 2016 03:41:14 +0000 (05:41 +0200)]
pretty: fix document link for color specification
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Aguilar [Sat, 8 Oct 2016 00:01:30 +0000 (17:01 -0700)]
mergetool: honor -O<orderfile>
Teach mergetool to pass "-O<orderfile>" down to `git diff` when
specified on the command-line.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: David Aguilar <davvid@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Aguilar [Fri, 7 Oct 2016 23:58:05 +0000 (16:58 -0700)]
mergetool: honor diff.orderFile
Teach mergetool to get the list of files to edit via `diff` so that we
gain support for diff.orderFile.
Suggested-by: Luis Gutierrez <luisgutz@gmail.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: David Aguilar <davvid@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Aguilar [Fri, 7 Oct 2016 23:58:04 +0000 (16:58 -0700)]
mergetool: move main program flow into a main() function
Make it easier to follow the program's flow by isolating all
logic into functions. Isolate the main execution code path into
a single unit instead of having prompt_after_failed_merge()
interrupt it partyway through.
The use of a main() function is borrowing a convention from C,
Python, Perl, and many other languages. This helps readers more
familiar with other languages understand the purpose of each
function when diving into the codebase with fresh eyes.
Signed-off-by: David Aguilar <davvid@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Aguilar [Fri, 7 Oct 2016 23:58:03 +0000 (16:58 -0700)]
mergetool: add copyright
Signed-off-by: David Aguilar <davvid@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Mon, 10 Oct 2016 19:36:41 +0000 (12:36 -0700)]
documentation: improve submodule.<name>.{url, path} description
Unlike the url variable a user cannot override the the path variable,
as it is part of the content together with the gitlink at the given
path. To avoid confusion do not mention the .path variable in the config
section and rely on the documentation provided in gitmodules[5].
Enhance the description of submodule.<name>.url and mention its two use
cases separately.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narębski [Fri, 7 Oct 2016 11:30:52 +0000 (13:30 +0200)]
configure.ac: improve description of NO_REGEX test
The commit
2f8952250a ("regex: add regexec_buf() that can work on a
non NUL-terminated string", 2016-09-21) changed description of
NO_REGEX build config variable to be more neutral, and actually say
that it is about support for REG_STARTEND. Change description in
configure.ac to match.
Change also the test message and variable name to match. The test
just checks that REG_STARTEND is #defined.
Issue-found-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 10 Oct 2016 21:09:12 +0000 (14:09 -0700)]
Ninth batch for 2.11
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 10 Oct 2016 21:03:51 +0000 (14:03 -0700)]
Merge branch 'jc/blame-reverse'
It is a common mistake to say "git blame --reverse OLD path",
expecting that the command line is dwimmed as if asking how lines
in path in an old revision OLD have survived up to the current
commit.
* jc/blame-reverse:
blame: dwim "blame --reverse OLD" as "blame --reverse OLD.."
blame: improve diagnosis for "--reverse NEW"
Junio C Hamano [Mon, 10 Oct 2016 21:03:50 +0000 (14:03 -0700)]
Merge branch 'nd/shallow-deepen'
The existing "git fetch --depth=<n>" option was hard to use
correctly when making the history of an existing shallow clone
deeper. A new option, "--deepen=<n>", has been added to make this
easier to use. "git clone" also learned "--shallow-since=<date>"
and "--shallow-exclude=<tag>" options to make it easier to specify
"I am interested only in the recent N months worth of history" and
"Give me only the history since that version".
* nd/shallow-deepen: (27 commits)
fetch, upload-pack: --deepen=N extends shallow boundary by N commits
upload-pack: add get_reachable_list()
upload-pack: split check_unreachable() in two, prep for get_reachable_list()
t5500, t5539: tests for shallow depth excluding a ref
clone: define shallow clone boundary with --shallow-exclude
fetch: define shallow boundary with --shallow-exclude
upload-pack: support define shallow boundary by excluding revisions
refs: add expand_ref()
t5500, t5539: tests for shallow depth since a specific date
clone: define shallow clone boundary based on time with --shallow-since
fetch: define shallow boundary with --shallow-since
upload-pack: add deepen-since to cut shallow repos based on time
shallow.c: implement a generic shallow boundary finder based on rev-list
fetch-pack: use a separate flag for fetch in deepening mode
fetch-pack.c: mark strings for translating
fetch-pack: use a common function for verbose printing
fetch-pack: use skip_prefix() instead of starts_with()
upload-pack: move rev-list code out of check_non_tip()
upload-pack: make check_non_tip() clean things up on error
upload-pack: tighten number parsing at "deepen" lines
...
Junio C Hamano [Mon, 10 Oct 2016 21:03:49 +0000 (14:03 -0700)]
Merge branch 'cp/completion-negative-refs'
The command-line completion script (in contrib/) learned to
complete "git cmd ^mas<HT>" to complete the negative end of
reference to "git cmd ^master".
* cp/completion-negative-refs:
completion: support excluding refs
Junio C Hamano [Mon, 10 Oct 2016 21:03:48 +0000 (14:03 -0700)]
Merge branch 'dp/autoconf-curl-ssl'
The ./configure script generated from configure.ac was taught how
to detect support of SSL by libcurl better.
* dp/autoconf-curl-ssl:
./configure.ac: detect SSL in libcurl using curl-config
Junio C Hamano [Mon, 10 Oct 2016 21:03:47 +0000 (14:03 -0700)]
Merge branch 'ak/curl-imap-send-explicit-scheme'
When we started cURL to talk to imap server when a new enough
version of cURL library is available, we forgot to explicitly add
imap(s):// before the destination. To some folks, that didn't work
and the library tried to make HTTP(s) requests instead.
* ak/curl-imap-send-explicit-scheme:
imap-send: Tell cURL to use imap:// or imaps://
Junio C Hamano [Mon, 10 Oct 2016 21:03:46 +0000 (14:03 -0700)]
Merge branch 'jk/pack-objects-optim-mru'
"git pack-objects" in a repository with many packfiles used to
spend a lot of time looking for/at objects in them; the accesses to
the packfiles are now optimized by checking the most-recently-used
packfile first.
* jk/pack-objects-optim-mru:
pack-objects: use mru list when iterating over packs
pack-objects: break delta cycles before delta-search phase
sha1_file: make packed_object_info public
provide an initializer for "struct object_info"
Junio C Hamano [Mon, 10 Oct 2016 21:03:46 +0000 (14:03 -0700)]
Merge branch 'rs/qsort'
We call "qsort(array, nelem, sizeof(array[0]), fn)", and most of
the time third parameter is redundant. A new QSORT() macro lets us
omit it.
* rs/qsort:
show-branch: use QSORT
use QSORT, part 2
coccicheck: use --all-includes by default
remove unnecessary check before QSORT
use QSORT
add QSORT
Jeff King [Mon, 3 Oct 2016 20:49:22 +0000 (16:49 -0400)]
tmp-objdir: do not migrate files starting with '.'
This avoids "." and "..", as we already do, but also leaves
room for index-pack to store extra data in the quarantine
area (e.g., for passing back any analysis to be read by the
pre-receive hook).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:49:18 +0000 (16:49 -0400)]
tmp-objdir: put quarantine information in the environment
The presence of the GIT_QUARANTINE_PATH variable lets any
called programs know that they're operating in a temporary
object directory (and where that directory is).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:49:14 +0000 (16:49 -0400)]
receive-pack: quarantine objects until pre-receive accepts
When a client pushes objects to us, index-pack checks the
objects themselves and then installs them into place. If we
then reject the push due to a pre-receive hook, we cannot
just delete the packfile; other processes may be depending
on it. We have to do a normal reachability check at this
point via `git gc`.
But such objects may hang around for weeks due to the
gc.pruneExpire grace period. And worse, during that time
they may be exploded from the pack into inefficient loose
objects.
Instead, this patch teaches receive-pack to put the new
objects into a "quarantine" temporary directory. We make
these objects available to the connectivity check and to the
pre-receive hook, and then install them into place only if
it is successful (and otherwise remove them as tempfiles).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:49:11 +0000 (16:49 -0400)]
tmp-objdir: introduce API for temporary object directories
Once objects are added to the object database by a process,
they cannot easily be deleted, as we don't know what other
processes may have started referencing them. We have to
clean them up with git-gc, which will apply the usual
reachability and grace-period checks.
This patch provides an alternative: it helps callers create
a temporary directory inside the object directory, and a
temporary environment which can be passed to sub-programs to
ask them to write there (the original object directory
remains accessible as an alternate of the temporary one).
See tmp-objdir.h for details on the API.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:49:08 +0000 (16:49 -0400)]
check_connected: accept an env argument
This lets callers influence the environment seen by
rev-list, which will be useful when we start providing
quarantined objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:36:26 +0000 (16:36 -0400)]
alternates: use fspathcmp to detect duplicates
On a case-insensitive filesystem, we should realize that
"a/objects" and "A/objects" are the same path. We already
use fspathcmp() to check against the main object directory,
but until recently we couldn't use it for comparing against
other alternates (because their paths were not
NUL-terminated strings). But now we can, so let's do so.
Note that we also need to adjust count-objects to load the
config, so that it can see the setting of core.ignorecase
(this is required by the test, but is also a general bugfix
for users of count-objects).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:36:22 +0000 (16:36 -0400)]
sha1_file: always allow relative paths to alternates
We recursively expand alternates repositories, so that if A
borrows from B which borrows from C, A can see all objects.
For the root object database, we allow relative paths, so A
can point to B as "../B/objects". However, we currently do
not allow relative paths when recursing, so B must use an
absolute path to reach C.
That is an ancient protection from
c2f493a (Transitively
read alternatives, 2006-05-07) that tries to avoid adding
the same alternate through two different paths. Since
5bdf0a8 (sha1_file: normalize alt_odb path before comparing
and storing, 2011-09-07), we use a normalized absolute path
for each alt_odb entry.
This means that in most cases the protection is no longer
necessary; we will detect the duplicate no matter how we got
there (but see below). And it's a good idea to get rid of
it, as it creates an unnecessary complication when setting
up recursive alternates (B has to know that A is going to
borrow from it and make sure to use an absolute path).
Note that our normalization doesn't actually look at the
filesystem, so it can still be fooled by crossing symbolic
links. But that's also true of absolute paths, so it's not a
good reason to disallow only relative paths (it's
potentially a reason to switch to real_path(), but that's a
separate and non-trivial change).
We adjust the test script here to demonstrate that this now
works, and add new tests to show that the normalization does
indeed suppress duplicates.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:36:18 +0000 (16:36 -0400)]
count-objects: report alternates via verbose mode
There's no way to get the list of alternates that git
computes internally; our tests only infer it based on which
objects are available. In addition to testing, knowing this
list may be helpful for somebody debugging their alternates
setup.
Let's add it to the "count-objects -v" output. We could give
it a separate flag, but there's not really any need.
"count-objects -v" is already a debugging catch-all for the
object database, its output is easily extensible to new data
items, and printing the alternates is not expensive (we
already had to find them to count the objects).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:36:09 +0000 (16:36 -0400)]
fill_sha1_file: write into a strbuf
It's currently the responsibility of the caller to give
fill_sha1_file() enough bytes to write into, leading them to
manually compute the required lengths. Instead, let's just
write into a strbuf so that it's impossible to get this
wrong.
The alt_odb caller already has a strbuf, so this makes
things strictly simpler. The other caller, sha1_file_name(),
uses a static PATH_MAX buffer and dies when it would
overflow. We can convert this to a static strbuf, which
means our allocation cost is amortized (and as a bonus, we
no longer have to worry about PATH_MAX being too short for
normal use).
This does introduce some small overhead in fill_sha1_file(),
as each strbuf_addchar() will check whether it needs to
grow. However, between the optimization in
fec501d
(strbuf_addch: avoid calling strbuf_grow, 2015-04-16) and
the fact that this is not generally called in a tight loop
(after all, the next step is typically to access the file!)
this probably doesn't matter. And even if it did, the right
place to micro-optimize is inside fill_sha1_file(), by
calling a single strbuf_grow() there.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:36:04 +0000 (16:36 -0400)]
alternates: store scratch buffer as strbuf
We pre-size the scratch buffer to hold a loose object
filename of the form "xx/yyyy...", which leads to allocation
code that is hard to verify. We have to use some magic
numbers during the initial allocation, and then writers must
blindly assume that the buffer is big enough. Using a strbuf
makes it more clear that we cannot overflow.
Unfortunately, we do still need some magic numbers to grow
our strbuf before calling fill_sha1_path(), but the strbuf
growth is much closer to the point of use. This makes it
easier to see that it's correct, and opens the possibility
of pushing it even further down if fill_sha1_path() learns
to work on strbufs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:35:55 +0000 (16:35 -0400)]
fill_sha1_file: write "boring" characters
This function forms a sha1 as "xx/yyyy...", but skips over
the slot for the slash rather than writing it, leaving it to
the caller to do so. It also does not bother to put in a
trailing NUL, even though every caller would want it (we're
forming a path which by definition is not a directory, so
the only thing to do with it is feed it to a system call).
Let's make the lives of our callers easier by just writing
out the internal "/" and the NUL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:35:51 +0000 (16:35 -0400)]
alternates: use a separate scratch space
The alternate_object_database struct uses a single buffer
both for storing the path to the alternate, and as a scratch
buffer for forming object names. This is efficient (since
otherwise we'd end up storing the path twice), but it makes
life hard for callers who just want to know the path to the
alternate. They have to remember to stop reading after
"alt->name - alt->base" bytes, and to subtract one for the
trailing '/'.
It would be much simpler if they could simply access a
NUL-terminated path string. We could encapsulate this in a
function which puts a NUL in the scratch buffer and returns
the string, but that opens up questions about the lifetime
of the result. The first time another caller uses the
alternate, the scratch buffer may get other data tacked onto
it.
Let's instead just store the root path separately from the
scratch buffer. There aren't enough alternates being stored
for the duplicated data to matter for performance, and this
keeps things simple and safe for the callers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:35:43 +0000 (16:35 -0400)]
alternates: encapsulate alt->base munging
The alternate_object_database struct holds a path to the
alternate objects, but we also use that buffer as scratch
space for forming loose object filenames. Let's pull that
logic into a helper function so that we can more easily
modify it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:35:31 +0000 (16:35 -0400)]
alternates: provide helper for allocating alternate
Allocating a struct alternate_object_database is tricky, as
we must over-allocate the buffer to provide scratch space,
and then put in particular '/' and NUL markers.
Let's encapsulate this in a function so that the complexity
doesn't leak into callers (and so that we can modify it
later).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:35:03 +0000 (16:35 -0400)]
alternates: provide helper for adding to alternates list
The submodule code wants to temporarily add an alternate
object store to our in-memory alt_odb list, but does it
manually. Let's provide a helper so it can reuse the code in
link_alt_odb_entry().
While we're adding our new add_to_alternates_memory(), let's
document add_to_alternates_file(), as the two are related.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:34:48 +0000 (16:34 -0400)]
link_alt_odb_entry: refactor string handling
The string handling in link_alt_odb_entry() is mostly an
artifact of the original version, which took the path as a
ptr/len combo, and did not have a NUL-terminated string
until we created one in the alternate_object_database
struct. But since
5bdf0a8 (sha1_file: normalize alt_odb
path before comparing and storing, 2011-09-07), the first
thing we do is put the path into a strbuf, which gives us
some easy opportunities for cleanup.
In particular:
- we call strlen(pathbuf.buf), which is silly; we can look
at pathbuf.len.
- even though we have a strbuf, we don't maintain its
"len" field when chomping extra slashes from the
end, and instead keep a separate "pfxlen" variable. We
can fix this and then drop "pfxlen" entirely.
- we don't check whether the path is usable until after we
allocate the new struct, making extra cleanup work for
ourselves. Since we have a NUL-terminated string, we can
bump the "is it usable" checks higher in the function.
While we're at it, we can move that logic to its own
helper, which makes the flow of link_alt_odb_entry()
easier to follow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:34:17 +0000 (16:34 -0400)]
link_alt_odb_entry: handle normalize_path errors
When we add a new alternate to the list, we try to normalize
out any redundant "..", etc. However, we do not look at the
return value of normalize_path_copy(), and will happily
continue with a path that could not be normalized. Worse,
the normalizing process is done in-place, so we are left
with whatever half-finished working state the normalizing
function was in.
Fortunately, this cannot cause us to read past the end of
our buffer, as that working state will always leave the
NUL from the original path in place. And we do tend to
notice problems when we check is_directory() on the path.
But you can see the nonsense that we feed to is_directory
with an entry like:
this/../../is/../../way/../../too/../../deep/../../to/../../resolve
in your objects/info/alternates, which yields:
error: object directory
/to/e/deep/too/way//ects/this/../../is/../../way/../../too/../../deep/../../to/../../resolve
does not exist; check .git/objects/info/alternates.
We can easily fix this just by checking the return value.
But that makes it hard to generate a good error message,
since we're normalizing in-place and our input value has
been overwritten by cruft.
Instead, let's provide a strbuf helper that does an in-place
normalize, but restores the original contents on error. This
uses a second buffer under the hood, which is slightly less
efficient, but this is not a performance-critical code path.
The strbuf helper can also properly set the "len" parameter
of the strbuf before returning. Just doing:
normalize_path_copy(buf.buf, buf.buf);
will shorten the string, but leave buf.len at the original
length. That may be confusing to later code which uses the
strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 3 Oct 2016 20:34:12 +0000 (16:34 -0400)]
t5613: clarify "too deep" recursion tests
These tests are just trying to show that we allow recursion
up to a certain depth, but not past it. But the counting is
a bit non-intuitive, and rather than test at the edge of the
breakage, we test "OK" cases in the middle of the chain.
Let's explain what's going on, and explicitly test the
switch between "OK" and "too deep".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Fri, 7 Oct 2016 18:18:51 +0000 (11:18 -0700)]
ls-files: add pathspec matching for submodules
Pathspecs can be a bit tricky when trying to apply them to submodules.
The main challenge is that the pathspecs will be with respect to the
superproject and not with respect to paths in the submodule. The
approach this patch takes is to pass in the identical pathspec from the
superproject to the submodule in addition to the submodule-prefix, which
is the path from the root of the superproject to the submodule, and then
we can compare an entry in the submodule prepended with the
submodule-prefix to the pathspec in order to determine if there is a
match.
This patch also permits the pathspec logic to perform a prefix match against
submodules since a pathspec could refer to a file inside of a submodule.
Due to limitations in the wildmatch logic, a prefix match is only done
literally. If any wildcard character is encountered we'll simply punt
and produce a false positive match. More accurate matching will be done
once inside the submodule. This is due to the superproject not knowing
what files could exist in the submodule.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Fri, 7 Oct 2016 18:18:50 +0000 (11:18 -0700)]
ls-files: pass through safe options for --recurse-submodules
Pass through some known-safe options when recursing into submodules.
(--cached, -v, -t, -z, --debug, --eol)
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Fri, 7 Oct 2016 18:18:49 +0000 (11:18 -0700)]
ls-files: optionally recurse into submodules
Allow ls-files to recognize submodules in order to retrieve a list of
files from a repository's submodules. This is done by forking off a
process to recursively call ls-files on all submodules. Use top-level
--super-prefix option to pass a path to the submodule which it can
use to prepend to output or pathspec matching logic.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Williams [Fri, 7 Oct 2016 18:18:48 +0000 (11:18 -0700)]
git: make super-prefix option
Add a super-prefix environment variable 'GIT_INTERNAL_SUPER_PREFIX'
which can be used to specify a path from above a repository down to its
root. When such a super-prefix is specified, the paths reported by Git
are prefixed with it to make them relative to that directory "above".
The paths given by the user on the command line
(e.g. "git subcmd --output-file=path/to/a/file" and pathspecs) are taken
relative to the directory "above" to match.
The immediate use of this option is by commands which have a
--recurse-submodule option in order to give context to submodules about
how they were invoked. This option is currently only allowed for
builtins which support a super-prefix.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 8 Oct 2016 15:38:47 +0000 (17:38 +0200)]
use strbuf_add_unique_abbrev() for adding short hashes, part 3
Call strbuf_add_unique_abbrev() to add abbreviated hashes to strbufs
instead of taking detours through find_unique_abbrev() and its static
buffer. This is shorter in most cases and a bit more efficient.
The changes here are not easily handled by a semantic patch because
they involve removing temporary variables and deconstructing format
strings for strbuf_addf().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 8 Oct 2016 14:14:57 +0000 (16:14 +0200)]
remove unnecessary NULL check before free(3)
free(3) handles NULL pointers just fine. Add a semantic patch for
removing unnecessary NULL checks before calling this function, and
apply it on the code base.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 6 Oct 2016 16:48:42 +0000 (12:48 -0400)]
files_read_raw_ref: prevent infinite retry loops in general
Limit the number of retries to 3. That should be adequate to
prevent any races, while preventing the possibility of
infinite loops if the logic fails to handle any other
possible error modes correctly.
After the fix in the previous commit, there's no known way
to trigger an infinite loop, but I did manually verify that
this fixes the test in that commit even when the code change
is not applied.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 6 Oct 2016 19:41:08 +0000 (15:41 -0400)]
files_read_raw_ref: avoid infinite loop on broken symlinks
Our ref resolution first runs lstat() on any path we try to
look up, because we want to treat symlinks specially (by
resolving them manually and considering them symrefs). But
if the results of `readlink` do _not_ look like a ref, we
fall through to treating it like a normal file, and just
read the contents of the linked path.
Since
fcb7c76 (resolve_ref_unsafe(): close race condition
reading loose refs, 2013-06-19), that "normal file" code
path will stat() the file and if we see ENOENT, will jump
back to the lstat(), thinking we've seen inconsistent
results between the two calls. But for a symbolic ref, this
isn't a race: the lstat() found the symlink, and the stat()
is looking at the path it points to. We end up in an
infinite loop calling lstat() and stat().
We can fix this by avoiding the retry-on-inconsistent jump
when we know that we found a symlink. While we're at it,
let's add a comment explaining why the symlink case gets to
this code in the first place; without that, it is not
obvious that the correct solution isn't to avoid the stat()
code path entirely.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Fri, 7 Oct 2016 16:09:04 +0000 (18:09 +0200)]
wt-status: begin error messages with lower-case
The previous code still followed the old git-pull.sh code which did not
adhere to our new convention.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Fri, 7 Oct 2016 16:09:00 +0000 (18:09 +0200)]
wt-status: teach has_{unstaged,uncommitted}_changes() about submodules
Sometimes we are *actually* interested in those changes... For
example when an interactive rebase wants to continue with a staged
submodule update.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Fri, 7 Oct 2016 16:08:56 +0000 (18:08 +0200)]
wt-status: export also the has_un{staged,committed}_changes() functions
They will be used in the upcoming rebase helper.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Fri, 7 Oct 2016 16:08:38 +0000 (18:08 +0200)]
wt-status: make the require_clean_work_tree() function reusable
The function used by "git pull" to stop the user when the working
tree has changes is useful in other places.
Let's move it into a more prominent (and into an actually reusable)
spot: wt-status.[ch].
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Fri, 7 Oct 2016 16:08:34 +0000 (18:08 +0200)]
pull: make code more similar to the shell script again
When converting the pull command to a builtin, the
require_clean_work_tree() function was renamed and the pull-specific
parts hard-coded.
This makes it impossible to reuse the code, so let's modify the code to
make it more similar to the original shell script again.
Note: when the hint "Please commit or stash them" was introduced first,
Git did not have the convention of continuing error messages in lower
case, but now we do have that convention, therefore we reintroduce this
hint down-cased, obeying said convention.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Fri, 7 Oct 2016 16:08:30 +0000 (18:08 +0200)]
pull: drop confusing prefix parameter of die_on_unclean_work_tree()
In cmd_pull(), when verifying that there are no changes preventing a
rebasing pull, we diligently pass the prefix parameter to the
die_on_unclean_work_tree() function which in turn diligently passes it
to the has_unstaged_changes() and has_uncommitted_changes() functions.
The casual reader might now be curious (as this developer was) whether
that means that calling `git pull --rebase` in a subdirectory will
ignore unstaged changes in other parts of the working directory. And be
puzzled that `git pull --rebase` (correctly) complains about those
changes outside of the current directory.
The puzzle is easily resolved: while we take pains to pass around the
prefix and even pass it to init_revisions(), the fact that no paths are
passed to init_revisions() ensures that the prefix is simply ignored.
That, combined with the fact that we will *always* want a *full* working
directory check before running a rebasing pull, is reason enough to
simply do away with the actual prefix parameter and to pass NULL
instead, as if we were running this from the top-level working directory
anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 6 Oct 2016 21:55:18 +0000 (14:55 -0700)]
Eighth batch for 2.11
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 6 Oct 2016 21:53:12 +0000 (14:53 -0700)]
Merge branch 'sg/ref-filter-parse-optim'
The code that parses the format parameter of for-each-ref command
has seen a micro-optimization.
* sg/ref-filter-parse-optim:
ref-filter: strip format option after a field name only once while parsing
Junio C Hamano [Thu, 6 Oct 2016 21:53:12 +0000 (14:53 -0700)]
Merge branch 'rs/cocci'
Code clean-up with help from coccinelle tool continues.
* rs/cocci:
coccicheck: make transformation for strbuf_addf(sb, "...") more precise
use strbuf_add_unique_abbrev() for adding short hashes, part 2
use strbuf_addstr() instead of strbuf_addf() with "%s", part 2
gitignore: ignore output files of coccicheck make target
Junio C Hamano [Thu, 6 Oct 2016 21:53:12 +0000 (14:53 -0700)]
Merge branch 'rs/c-auto-resets-attributes'
When "%C(auto)" appears at the very beginning of the pretty format
string, it did not need to issue the reset sequence, but it did.
* rs/c-auto-resets-attributes:
pretty: avoid adding reset for %C(auto) if output is empty