OSDN Git Service
Alex Deucher [Tue, 17 Dec 2019 14:51:40 +0000 (09:51 -0500)]
drm/amdgpu/smu: add metrics table lock for vega20 (v2)
To protect access to the metrics table.
v2: unlock on error
Bug: https://gitlab.freedesktop.org/drm/amd/issues/900
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 17 Dec 2019 14:51:13 +0000 (09:51 -0500)]
drm/amdgpu/smu: add metrics table lock for renoir (v2)
To protect access to the metrics table.
v2: unlock on error
Bug: https://gitlab.freedesktop.org/drm/amd/issues/900
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 17 Dec 2019 14:50:42 +0000 (09:50 -0500)]
drm/amdgpu/smu: add metrics table lock for navi (v2)
To protect access to the metrics table.
v2: unlock on error
Bug: https://gitlab.freedesktop.org/drm/amd/issues/900
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 17 Dec 2019 14:49:52 +0000 (09:49 -0500)]
drm/amdgpu/smu: add metrics table lock for arcturus (v2)
To protect access to the metrics table.
v2: unlock on error
Bug: https://gitlab.freedesktop.org/drm/amd/issues/900
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 17 Dec 2019 14:35:01 +0000 (09:35 -0500)]
drm/amdgpu/smu: add metrics table lock
This table is used for lots of things, add it's own lock.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/900
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pan Zhang [Wed, 18 Dec 2019 03:50:08 +0000 (11:50 +0800)]
gpu: drm: dead code elimination
this set adds support for removal of gpu drm dead code.
patch3 is similar with patch 1:
`num` is a data of u8 type and ATOM_MAX_HW_I2C_READ == 255,
so there is a impossible condition '(num > 255) => (0-255 > 255)'.
Signed-off-by: Pan Zhang <zhangpan26@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 10 Dec 2019 21:21:44 +0000 (16:21 -0500)]
drm/amdgpu: wait for all rings to drain before runtime suspending
Add a safety check to runtime suspend to make sure all outstanding
fences have signaled before we suspend. Doesn't fix any known issue.
We already do this via the fence driver suspend function, but we
just force completion rather than bailing. This bails on runtime
suspend so we can try again later once the fences are signaled to
avoid missing any outstanding work.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 16 Dec 2019 20:05:22 +0000 (15:05 -0500)]
drm/amdgpu/smu: fix spelling
s/dispaly/display/g
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Wed, 11 Dec 2019 19:25:36 +0000 (14:25 -0500)]
drm/amdgpu: Switch from system_highpri_wq to system_unbound_wq
This is to avoid queueing jobs to same CPU during XGMI hive reset
because there is a strict timeline for when the reset commands
must reach all the GPUs in the hive.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Wed, 11 Dec 2019 19:18:31 +0000 (14:18 -0500)]
drm/amdgpu: Redo XGMI reset synchronization.
Use task barrier in XGMI hive to synchronize ASIC resets
across devices in XGMI hive.
v2: Return right away with a warning if no xgmi hive, update doc.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Fri, 6 Dec 2019 17:43:30 +0000 (12:43 -0500)]
drm/amdgpu: Add task barrier to XGMI hive.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Fri, 6 Dec 2019 17:26:33 +0000 (12:26 -0500)]
drm: Add Reusable task barrier.
It is used to synchronize N threads at a rendevouz point before execution
of critical code that has to be started by all the threads at approximatly
the same time.
v2: Remove mention of reset use case, improve doc.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Fri, 6 Dec 2019 18:19:15 +0000 (13:19 -0500)]
drm/amdgpu: reverts commit
ce316fa55ef0f1751276b846a54fb3b835bd5e64.
In preparation for doing XGMI reset synchronization using task barrier.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Mon, 16 Dec 2019 16:01:51 +0000 (11:01 -0500)]
drm/amdgpu/vcn: remove unnecessary included headers
Esp. VCN1.0 headers should not be here
v2: add back the <linux/module.h> to keep consistent.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Tue, 17 Dec 2019 10:16:44 +0000 (18:16 +0800)]
drm/amdgpu: fix KIQ ring test fail in TDR of SRIOV
issues:
MEC is ruined by the amdkfd_pre_reset after VF FLR done
fix:
amdkfd_pre_reset() would ruin MEC after hypervisor finished the VF FLR,
the correct sequence is do amdkfd_pre_reset before VF FLR but there is
a limitation to block this sequence:
if we do pre_reset() before VF FLR, it would go KIQ way to do register
access and stuck there, because KIQ probably won't work by that time
(e.g. you already made GFX hang)
so the best way right now is to simply remove it.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Tue, 17 Dec 2019 10:18:31 +0000 (18:18 +0800)]
drm/amdgpu: fix double gpu_recovery for NV of SRIOV
issues:
gpu_recover() is re-entered by the mailbox interrupt
handler mxgpu_nv.c
fix:
we need to bypass the gpu_recover() invoke in mailbox
interrupt as long as the timeout is not infinite (thus the TDR
will be triggered automatically after time out, no need to invoke
gpu_recover() through mailbox interrupt.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yintian Tao [Tue, 17 Dec 2019 03:43:40 +0000 (11:43 +0800)]
drm/amd/powerplay: skip soc clk setting under pp one vf
Under sriov pp one vf mode, there is no need to set
soc clk under pp one vf because smu firmware will depend
on the mclk to set the appropriate soc clk for it.
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by : Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nirmoy Das [Mon, 9 Dec 2019 21:52:25 +0000 (22:52 +0100)]
drm/scheduler: do not keep a copy of sched list
entity should not keep copy and maintain sched list for
itself.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nirmoy Das [Mon, 16 Dec 2019 13:43:34 +0000 (14:43 +0100)]
amd/amdgpu: add sched array to IPs with multiple run-queues
This sched array can be passed on to entity creation routine
instead of manually creating such sched array on every context creation.
v2: squash in missing break fix
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nirmoy Das [Fri, 6 Dec 2019 15:55:49 +0000 (16:55 +0100)]
drm/amdgpu: replace vm_pte's run-queue list with drm gpu scheds list
drm_sched_entity_init() takes drm gpu scheduler list instead of
drm_sched_rq list. This makes conversion of drm_sched_rq list
to drm gpu scheduler list unnecessary
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nirmoy Das [Thu, 5 Dec 2019 10:38:00 +0000 (11:38 +0100)]
drm/scheduler: rework entity creation
Entity currently keeps a copy of run_queue list and modify it in
drm_sched_entity_set_priority(). Entities shouldn't modify run_queue
list. Use drm_gpu_scheduler list instead of drm_sched_rq list
in drm_sched_entity struct. In this way we can select a runqueue based
on entity/ctx's priority for a drm scheduler.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 12 Dec 2019 22:43:36 +0000 (17:43 -0500)]
drm/amdgpu/pm_runtime: update usage count in fence handling
Increment the usage count in emit fence, and decrement in
process fence to make sure the GPU is always considered in
use while there are fences outstanding. We always wait for
the engines to drain in runtime suspend, but in practice
that only covers short lived jobs for gfx. This should
cover us for longer lived fences.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhan Liu [Mon, 16 Dec 2019 19:56:50 +0000 (14:56 -0500)]
drm/amd/powerplay: Add SMU WMTABLE Validity Check for Renoir
[Why]
SMU watermark table (WMTABLE) validity check is missing on Renoir.
This validity check is very useful for checking whether
WMTABLE is updated successfully.
[How]
Add SMU watermark validity check.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zhengbin [Sat, 14 Dec 2019 09:02:24 +0000 (17:02 +0800)]
drm/amdgpu: Remove unneeded semicolon in amdgpu_ras.c
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:318:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zhengbin [Sat, 14 Dec 2019 09:02:23 +0000 (17:02 +0800)]
drm/amdgpu: Remove unneeded semicolon in gfx_v10_0.c
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:1967:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zhengbin [Sat, 14 Dec 2019 09:02:22 +0000 (17:02 +0800)]
drm/amdgpu: Remove unneeded semicolon in amdgpu_pmu.c
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:110:3-4: Unneeded semicolon
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:133:2-3: Unneeded semicolon
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:163:2-3: Unneeded semicolon
drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:191:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zhengbin [Sat, 14 Dec 2019 09:12:33 +0000 (17:12 +0800)]
drm/amd/display: Remove unneeded semicolon
Fixes coccicheck warning:
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c:412:90-91: Unneeded semicolon
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 13 Dec 2019 18:25:39 +0000 (13:25 -0500)]
drm/amdgpu/sdma5: make ring tests less chatty
We already did this for older generations.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 13 Dec 2019 18:23:46 +0000 (13:23 -0500)]
drm/amdgpu/gfx10: make ring tests less chatty
We already did this for older generations.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nikola Cornij [Tue, 3 Dec 2019 22:01:12 +0000 (17:01 -0500)]
drm/amd/display: Add debug option to override DSC target bpp increment
[why]
It's required for debug purposes.
[how]
Add a dsc_bpp_increment_div debug option that overrides DPCD
BITS_PER_PIXEL_INCREMENT value. The value dsc_bpp_increment_div should
be set to is the one after parsing, i.e. it could be 1, 2, 4, 8 or 16
(meaning 1pix, 1/2pix, ..., 1/16pix).
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Thu, 5 Dec 2019 19:55:24 +0000 (14:55 -0500)]
drm/amd/display: Do not handle linkloss for eDP
[Why]
eDP is internal link and link loss is unexpected.
It is typically going to be PSR related errors, which is
handled separately.
[How]
Check for eDP and skip check for link loss
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Wed, 4 Dec 2019 23:35:15 +0000 (18:35 -0500)]
drm/amd/display: fix missing cursor on some rotated SLS displays
[Why]
Cursor disappears for some SLS displays that are rotated 180
and 270 degrees. This occurs when there is no pipe split being
done ( ex. 3 or more displays ). The cursor calculations assume
pipe splitting is done so when it calculates the new cursor
position in hwss.set_cursor_position(), it is out-of-bounds so
it disables the cursor in hubp.set_cursor_position().
[How]
In non pipe split cases, calculate cursor using viewport size
( width or height ) instead of viewport size * 2 ( the two
because pipe splitting divides the rectangle into two ).
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Thu, 5 Dec 2019 16:58:20 +0000 (11:58 -0500)]
drm/amd/display: Formula refactor for calculating DPP CLK DTO
[Why]
Previous formula for calculating DPP CLK DTO was
hard to understand.
[How]
Replace with easier to understand formula that produces
same results.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Wed, 4 Dec 2019 23:36:07 +0000 (18:36 -0500)]
drm/amd/display: Lower DPP DTO only when safe
[Why]
A corner case currently exists where DPP DTO is lowered before
pipes are updated to a higher viewport. This causes underflow
as the DPPCLK is too low for the current viewport.
[How]
Only lower DPP DTO when it is safe to lower, or if
the newer clocks are higher than the current ones.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Mon, 25 Nov 2019 15:58:44 +0000 (10:58 -0500)]
drm/amd/display: support virtual DCN
[why]
DAL3 should support SRIOV
[how]
Add support for the virtual dal flag. This flag should skip
most/all of DC construction since the HW isn't accessible, but
still construct WindowsDM (almost) normally but with only SW display
targets
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Wed, 4 Dec 2019 22:59:14 +0000 (17:59 -0500)]
drm/amd/display: Fix manual trigger source for DCN2
Fix manual trigger source correctly be TRIGA for DCN2
rather than MANUAL_FLOW.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
abdoulaye berthe [Tue, 3 Dec 2019 19:04:06 +0000 (14:04 -0500)]
drm/amd/display: Update extended timeout support for DCN20 and DCN21
[Why]
DCN21 and DCN2 extended timeout support cap is not set correctly.
[How]
Set extended timeout support for ASIC families to their right values.
Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Mon, 2 Dec 2019 21:45:16 +0000 (16:45 -0500)]
drm/amd/display: Fix update_bw_bounding_box Calcs
[Why]
Previously update_bw_bounding_box for RN was commented out
due to incorrect values causing BSOD on Hybrid Graphics.
However, commenting out this function also may cause issues
such as underflow in certain cases such as 2x4K displays.
[How]
Fix dram_speed_mts calculations.
Update from proper index of clock_limits[]
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dale Zhao [Mon, 2 Dec 2019 02:31:55 +0000 (10:31 +0800)]
drm/amd/display: Use absolute time stamp to follow the eDP T7 spec requirement
[Why]:
According to eDP spec, max T7 delay should be 50 ms. Current code uses 300
retry counters may not be accurate enough for different panels.
[How]:
Use absolute time stamp to achive accurate delay.
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 2 Dec 2019 08:42:28 +0000 (03:42 -0500)]
drm/amd/display: 3.2.64
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Thu, 28 Nov 2019 20:55:01 +0000 (15:55 -0500)]
drm/amd/display: fix 270 degree rotation for mixed-SLS mode
[Why]
When we rotate 270 in mixed SLS mode, the recouts occupy the
right side of the display. So all the recout_skip_v values
are relative to the left side of the display. This causes
adjust_vp_and_init_for_seamless_clip() to incorrectly increase
the data->viewport.height for that recout. The rotation looks
like the bottom half is duplicated twice.
[How]
recout.x values are being adjusted based on
stream->timing.h_border_left. Instead of using h_border_left,
use dst.x to represent the border. Shift dst.x by the amount of
stream->timing.h_border_left and set
stream->timing.h_border_left to 0. Do all the calculations
and then revert stream->timing.h_border_left and
stream->dst.x back to their original values.
When calculating pipe_ctx->plane_res.scl_data.h_active,
make sure to use the original stream->timing.h_border_left
value.
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Thu, 28 Nov 2019 20:21:26 +0000 (15:21 -0500)]
drm/amd/display: Get cache window sizes from DMCUB firmware
[Why]
Firmware state and tracebuffer shouldn't be considered stable API
between firmware versions.
Driver shouldn't be querying anything from firmware state or tracebuffer
outside of debugging.
Commands are the stable API for this once we have the outbox.
[How]
Add metadata struct to the end of the data firmware that describes
fw_state_size and some reserved area for future use.
Drop the tracebuffer and firmware state headers since they can differ
per version.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Noah Abradjian [Fri, 29 Nov 2019 18:48:36 +0000 (13:48 -0500)]
drm/amd/display: Remove reliance on pipe indexing
[Why]
In certain instances, there was a reliance on pipe indexing being accurate. However, this
assumption fails with harvesting of pipes 1 or 2, which can occur in production B6 parts.
HW hang would occur as a result.
[How]
Use hubp index for mpcc, and do mpc_init for all theoretical pipes (including disabled ones).
Signed-off-by: Noah Abradjian <noah.abradjian@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Derek Lai [Wed, 27 Nov 2019 10:04:37 +0000 (18:04 +0800)]
drm/amd/display: Specified VR patch skip to reset segment to 0
[Why]
After read the 3rd Edid blocks, we will reset segment to 0,
which causes this VR fail to read Edid successfully.
[How]
Skip to reset segment to 0 for this VR device.
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Paul Hsieh [Thu, 28 Nov 2019 02:44:39 +0000 (10:44 +0800)]
drm/amd/display: check link status before disable stream
[Why]
1. Set second screen only then unplug external monitor
2. Enter to S4 then plug in external monitor
3. Resume from S4, eDP will not turn off when OS set
second screen only
Sometimes OS will not set eDP power up cause eDP dpms_off
keep true then driver skipp disable stream
[How]
When drvier try to disable stream, add link status condition
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hugo Hu [Wed, 27 Nov 2019 05:52:44 +0000 (13:52 +0800)]
drm/amd/display: disable lttpr for Navi
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Mon, 25 Nov 2019 14:49:27 +0000 (09:49 -0500)]
drm/amd/display: Perform DMUB hw_init on resume
[Why]
The DMUB is put into reset on suspend and is not running on resume,
disabling PSR/ABM features.
[How]
Move the allocation of the framebuffer to sw_init.
Do DMUB hardware init and framebuffer filling only from hw_init.
On resume the contents of the framebuffer will be invalid so those
should be cleared.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nikola Cornij [Tue, 26 Nov 2019 20:18:31 +0000 (15:18 -0500)]
drm/amd/display: Map ODM memory correctly when doing ODM combine
[why]
Up to 4 ODM memory pieces are required per ODM combine and cannot
overlap, i.e. each ODM "session" has to use its own memory pieces.
The ODM-memory mapping is currently broken for generic case.
The maximum number of memory pieces is ASIC-dependent, but it's always
big enough to satisfy maximum number of ODM combines. Memory pieces
are mapped as a bit-map, i.e. one memory piece corresponds to one bit.
The OPTC doing ODM needs to select memory pieces by setting the
corresponding bits, making sure there's no overlap with other OPTC
instances that might be doing ODM.
The current mapping works only for OPTC instance indexes smaller than
3. For instance indexes 3 and up it practically maps no ODM memory,
causing black, gray or white screen in display configs that include
ODM on OPTC instance 3 or up.
[how]
Statically map two unique ODM memory pieces for each OPTC instance
and piece them together when programming ODM combine mode.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Thu, 21 Nov 2019 02:23:47 +0000 (21:23 -0500)]
drm/amd/display: Add warmup escape call support
Add warmup escape support, for diags, in a way that is possible to
choose a new or an existing sequence. For achieving this goal, this
commit adds separated MCIF buffer as VCN request.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Josip Pavic [Tue, 26 Nov 2019 17:26:14 +0000 (12:26 -0500)]
drm/amd/display: fix regamma build optimization
[Why]
When the global variable pow_buffer_ptr is set to -1, by definition
optimizations should not be used to build the regamma. Since
translate_from_linear_space unconditionally increments this global, it
inadvertently enables the optimization.
[How]
Increment pow_buffer_ptr only if it is not -1.
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 25 Nov 2019 00:11:15 +0000 (19:11 -0500)]
drm/amd/display: scaling changes should also be a full update
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 25 Nov 2019 15:55:41 +0000 (10:55 -0500)]
drm/amd/display: 3.2.63
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Sat, 23 Nov 2019 22:15:51 +0000 (17:15 -0500)]
drm/amd/display: Remove integer scaling code from DC and fix cursor
[Why]
Scaling better handled by upper layers before pipe splitting.
[How]
Remove DC code for integer scaling and force cursor update if
viewport or scaling changes occur to prevent underflow from
invalid cursor position.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Fri, 22 Nov 2019 00:13:54 +0000 (19:13 -0500)]
drm/amd/display: Enable Seamless Boot Transition for Multiple Streams
[why]
dc previously had bugs that interfered with the ability to inherit a
timing from a device with multiple streams (without flash/blanking).
After this fix there is still a dependency on UEFI support.
[how]
fixed 3 bugs: loaded MPC state, changed bw_optimize flag to a counter
instead of a boolean, and reading dpp/disp clk from HW to ensure we
don't raise the clock's when we're not supposed to.
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Fri, 22 Nov 2019 15:58:10 +0000 (10:58 -0500)]
drm/amd/display: Default max bpc to 16 for eDP
[Why]
Some 10bit eDP panels don't lightup after we cap bpc to 8.
[How]
Set default max_bpc to 16 for edp connector type.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Noah Abradjian [Fri, 22 Nov 2019 21:07:24 +0000 (16:07 -0500)]
drm/amd/display: Collapse resource arrays when pipe is disabled
[Why]
Currently, pipe resources are assigned to an index that matches the pipe position.
However, if pipe 1 or 2 is disabled, there will be a gap in the arrays which causes a crash when iterating based on pipe_count.
[How]
Fix resource construct to assign resources to minimum available array index.
Signed-off-by: Noah Abradjian <noah.abradjian@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Mon, 18 Nov 2019 20:41:19 +0000 (15:41 -0500)]
drm/amd/display: update chroma viewport wa
[Why]
Need previously implemented chroma vp wa to work for rotation cases.
[How]
Implement rotation specific wa.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Noah Abradjian [Fri, 22 Nov 2019 16:47:52 +0000 (11:47 -0500)]
drm/amd/display: Use pipe_count for num of opps
[Why]
There is one opp per pipe. For certain RN parts, the fourth pipe is disabled, so there is no opp for it.
res_cap->num_opp is hardcoded to 4, so if we use that to iterate over opps we will crash.
[How]
Use the pipe_count value instead, which is not hardcoded and so will have the correct number.
Signed-off-by: Noah Abradjian <noah.abradjian@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Amanda Liu [Thu, 21 Nov 2019 21:06:57 +0000 (16:06 -0500)]
drm/amd/display: Reinstate LFC optimization
[why]
We want to streamline the calculations made when entering LFC.
Previously, the optimizations led to screen tearing and were backed out
to unblock development.
[how]
Integrate other calculations parameters, as well as screen tearing,
fixes with the original LFC calculation optimizations.
Signed-off-by: Amanda Liu <amanda.liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Qingqing Zhuo [Thu, 21 Nov 2019 19:06:32 +0000 (14:06 -0500)]
drm/amd/display: AVI info package change due to spec update
YQ should be limited range for all cases.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Camille Cho [Fri, 15 Nov 2019 09:28:48 +0000 (17:28 +0800)]
drm/amd/display: Add definition for number of backlight data points
[Why]
A hardcoded number is used today
[How]
Add definition for number of BL data points
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joshua Aberback [Tue, 19 Nov 2019 23:46:26 +0000 (18:46 -0500)]
drm/amd/display: Add interface to adjust DSC max target bpp limit
[Why]
For some use cases we need to be able to adjust the maximum target bpp
allowed by DSC policy.
[How]
New interface dc_dsc_policy_set_max_target_bpp_limit
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aidan Yang [Wed, 20 Nov 2019 16:05:36 +0000 (11:05 -0500)]
drm/amd/display: Disable integerscaling for downscale and MPO
[Why]
Integer scaling is applied to MPO planes when downscaling,
MPO planes use variable taps and integer scaling sets taps=1
[How]
Disable integer scaling on MPO planes,
Disable integer scaling for downscaling planes
Signed-off-by: Aidan Yang <Aidan.Yang@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Wed, 20 Nov 2019 15:37:19 +0000 (10:37 -0500)]
drm/amd/display: Use physical addressing for DMCUB on both dcn20/21
[Why]
CW0 and CW1 need to use physical addressing mode for dcn20 and dcn21.
The current code for dcn20 is using virtual.
[How]
We already program the DMCUB like this on dcn21 so we should just use
the same sequence for both.
Copy the dcn21 sequences into the dmjub_dcn20.c file and rename them.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Wed, 20 Nov 2019 14:29:17 +0000 (09:29 -0500)]
drm/amd/display: Get DMUB registers from ASIC specific structs
[Why]
These values can differ per ASIC and should follow the full DC style
register programming model.
[How]
Define a common list and fill in the common list separately for
dcn20 and dcn21.
Unlike DC we're not using designated initializers for better compiler
compatibility since this resides in the DMUB service.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Noah Abradjian [Mon, 18 Nov 2019 18:59:57 +0000 (13:59 -0500)]
drm/amd/display: Add wait for flip not pending on pipe unlock
[Why]
Lack of proper timing caused intermittent underflow on unplug external DP.
A previous fix was invalid and caused S0i3 regression, so had to be reverted.
[How]
When unlocking pipe, wait for no pipes to have flip pending before unlocking.
Signed-off-by: Noah Abradjian <noah.abradjian@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
abdoulaye berthe [Tue, 19 Nov 2019 16:10:54 +0000 (11:10 -0500)]
drm/amd/display: disable lttpr for RN
Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Sat, 9 Nov 2019 02:52:27 +0000 (21:52 -0500)]
drm/amd/display: HDMI 2.x audio bandwidth check
Add HDMI 2.x audio bandwidth check
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Thu, 12 Dec 2019 15:52:34 +0000 (10:52 -0500)]
drm/amdgpu/vcn: remove JPEG related code from idle handler and begin use
For VCN2.0 and above, VCN has been separated from JPEG
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Thu, 12 Dec 2019 15:28:02 +0000 (10:28 -0500)]
drm/amdgpu/vcn1.0: use its own idle handler and begin use funcs
Because VCN1.0 power management and DPG mode are managed together with
JPEG1.0 under both HW and FW, so separated them from general VCN code.
Also the multiple instances case got removed, since VCN1.0 HW just have
a single instance.
v2: override work func with vcn1.0's own
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
changzhu [Thu, 12 Dec 2019 05:46:06 +0000 (13:46 +0800)]
drm/amdgpu: enable gfxoff for raven1 refresh
When smu version is larger than 0x41e2b, it will load
raven_kicker_rlc.bin.To enable gfxoff for raven_kicker_rlc.bin,it
needs to avoid adev->pm.pp_feature &= ~PP_GFXOFF_MASK when it loads
raven_kicker_rlc.bin.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily Deng [Mon, 16 Dec 2019 09:19:44 +0000 (17:19 +0800)]
drm/amdgpu/sriov: Tonga sriov also need load firmware with smu
Fix Tonga sriov load driver fail issue.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewd-by Yintian Tao <Yintian.tao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Fri, 13 Dec 2019 08:46:05 +0000 (16:46 +0800)]
drm/amdgpu: drop useless BACO arg in amdgpu_ras_reset_gpu
BACO reset mode strategy is determined by latter func when
calling amdgpu_ras_reset_gpu. So not to confuse audience, drop
it.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Wed, 27 Nov 2019 19:47:32 +0000 (14:47 -0500)]
drm/amd/display: add missing dcn link encoder regs
[Why]
The earlier change: "check phy dpalt lane count config"
uses link encoder registers not defined properly.
That caused regression with mst-enabled display not
lighting up.
[How]
Add missing reg definitions.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Mon, 2 Dec 2019 21:26:42 +0000 (16:26 -0500)]
drm/amdgpu: add dpcs20 registers
add reg headers to dpcs includes
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Mon, 2 Dec 2019 15:01:38 +0000 (10:01 -0500)]
drm/amdgpu: move dpcs headers to dpcs includes
- create dpcs directory for dpcs asic_reg headers
- move dpcs21 reg headers from dcn to dpcs directory
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yong Zhao [Wed, 11 Dec 2019 23:04:05 +0000 (18:04 -0500)]
drm/amdgpu: Add CU info print log
The log will be useful for easily getting the CU info on various
emulation models or ASICs.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yong Zhao [Tue, 3 Dec 2019 04:23:41 +0000 (23:23 -0500)]
drm/amdkfd: Use Arcturus specific set_vm_context_page_table_base()
Since Arcturus has it own function pointer, we can move Arcturus
specific logic to there rather than leaving it entangled with
other GFX9 chips.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Colin Ian King [Thu, 12 Dec 2019 18:16:57 +0000 (18:16 +0000)]
drm/amd/powerplay: fix various dereferences of a pointer before it is null checked
There are several occurrances of the pointer hwmgr being dereferenced
before it is null checked. Fix these by performing the dereference
of hwmgr after it has been null checked.
Addresses-Coverity: ("Dereference before null check")
Fixes:
c9ffa427db34e6 ("drm/amd/powerplay: enable pp one vf mode for vega10")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Wed, 30 Jan 2019 20:29:34 +0000 (15:29 -0500)]
drm/amdkfd: queue kfd interrupt work to different CPU
Because queue_work schedule the work on the same CPU the interrupt
handler is running, if there are many interrupts pending, it takes
longer time for work queue to start, or even worse system will hang.
v2: queue work to same NUMA node for better cache locality
v3: handle cpumask_next wraparound case
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timothy Pearson [Sat, 7 Dec 2019 22:48:09 +0000 (16:48 -0600)]
amdgpu: Wrap FPU dependent functions in dc20
dc20 containes several FPU-dependent functions without proper FPU
kernel mode enable/disable wrappers. Add the required wrappers
for both x86 and POWER.
This enables Navi DC20 support for POWER systems.
v2: fix compilation
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timothy Pearson [Sat, 7 Dec 2019 22:47:46 +0000 (16:47 -0600)]
amdgpu: Enable initial DCN support on POWER
DCN requires floating point support to operate. Add the appropriate
x86/ppc64 guards and FPU / AltiVec / VSX context switches to DCN.
Note that the current DC20 code doesn't contain all required FPU
wrappers on x86 or POWER, so this patch is insufficient to fully
enable DC20 on POWER.
v2: s/X86_64/X86/g to retain previous behavior.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timothy Pearson [Sat, 7 Dec 2019 22:47:13 +0000 (16:47 -0600)]
amdgpu: Prepare DCN floating point macros for generic arch support
Introduce DC_FP_START()/DC_FP_END() macros to help enable floating
point kernel mode support across various architectures.
v2: move copyright update to commit which adds the changes
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Vetter [Wed, 18 Dec 2019 15:19:26 +0000 (16:19 +0100)]
Merge tag 'du-next-
20191218' of git://linuxtv.org/pinchartl/media into drm-next
R-Car Display Unit changes:
- Color Management Module support
- LVDS encoder dual-link support enhancements
- R8A77980 support
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218151710.GA13830@pendragon.ideasonboard.com
Kieran Bingham [Wed, 11 Sep 2019 19:25:01 +0000 (20:25 +0100)]
drm: rcar-du: Add r8a77980 support
Add direct support for the r8a77980 (V3H).
The V3H shares a common, compatible configuration with the r8a77970
(V3M) so that device info structure is reused.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Fabrizio Castro [Tue, 17 Dec 2019 13:45:59 +0000 (13:45 +0000)]
drm: rcar-du: lvds: Allow for even and odd pixels swap
DT properties dual-lvds-even-pixels and dual-lvds-odd-pixels
can be used to work out if the driver needs to swap even
and odd pixels around.
This patch makes use of the return value from function
drm_of_lvds_get_dual_link_pixel_order to determine if we
need to swap odd and even pixels around for things to work
properly.
The dual_link boolean field from struct rcar_lvds is not
sufficient to describe the type of LVDS link anymore, since
we now have information related to pixel order, therefore
rename it to link_type and repurpose its usage to fit the
new requirements.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Fabrizio Castro [Tue, 17 Dec 2019 13:45:58 +0000 (13:45 +0000)]
drm: rcar-du: lvds: Get dual link configuration from DT
For dual-LVDS configurations, it is now possible to mark the
DT port nodes for the sink with boolean properties (like
dual-lvds-even-pixels and dual-lvds-odd-pixels) to let drivers
know the encoders need to be configured in dual-LVDS mode.
Rework the implementation of rcar_lvds_parse_dt_companion
to make use of the DT markers while keeping backward
compatibility.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Fabrizio Castro [Tue, 17 Dec 2019 13:45:57 +0000 (13:45 +0000)]
drm: rcar-du: lvds: Improve identification of panels
Dual-LVDS panels are mistakenly identified as bridges, this
commit replaces the current logic with a call to
drm_of_find_panel_or_bridge to sort that out.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Fabrizio Castro [Tue, 17 Dec 2019 13:45:56 +0000 (13:45 +0000)]
drm: of: Add drm_of_lvds_get_dual_link_pixel_order
An LVDS dual-link connection is made of two links, with even
pixels transitting on one link, and odd pixels on the other
link. The device tree can be used to fully describe dual-link
LVDS connections between encoders and bridges/panels.
The sink of an LVDS dual-link connection is made of two ports,
the corresponding OF graph port nodes can be marked
with either dual-lvds-even-pixels or dual-lvds-odd-pixels,
and that fully describes an LVDS dual-link connection,
including pixel order.
drm_of_lvds_get_dual_link_pixel_order is a new helper
added by this patch, given the source port nodes it
returns DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS if the source
port nodes belong to an LVDS dual-link connection, with even
pixels expected to be generated from the first port, and odd
pixels expected to be generated from the second port.
If the new helper returns DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS,
odd pixels are expected to be generated from the first port,
and even pixels from the other port.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Tue, 15 Oct 2019 23:06:52 +0000 (02:06 +0300)]
drm: rcar-du: lvds: Get mode from state
The R-Car LVDS encoder driver implements the bridge .mode_set()
operation for the sole purpose of storing the mode in the LVDS private
data, to be used later when enabling the encoder.
Switch to the bridge .atomic_enable() and .atomic_disable() operations
in order to access the global atomic state, and get the mode from the
state instead. Remove both the unneeded .mode_set() operation and the
display_mode and mode fields storing state data from the rcar_lvds
private structure.
As a side effect we get the CRTC from the state, replace the CRTC
pointer retrieved through the bridge's encoder that shouldn't be used by
atomic drivers.
While at it, clarify a few error messages in rcar_lvds_get_lvds_mode()
and turn them into warnings as they are not fatal.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Tested-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Geert Uytterhoeven [Tue, 5 Nov 2019 18:35:03 +0000 (19:35 +0100)]
drm: rcar-du: Recognize "renesas,vsps" in addition to "vsps"
The Renesas-specific "vsps" property lacks a vendor prefix.
Add a "renesas," prefix to comply with DT best practises.
Retain backward compatibility with old DTBs by falling back to "vsps"
when needed.
Fixes:
6d62ef3ac30be756 ("drm: rcar-du: Expose the VSP1 compositor through KMS planes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Geert Uytterhoeven [Tue, 5 Nov 2019 18:35:02 +0000 (19:35 +0100)]
dt-bindings: display: renesas: du: Add vendor prefix to vsps property
The Renesas-specific "vsps" property lacks a vendor prefix.
Add a "renesas," prefix to comply with DT best practises.
Move "renesas,vsps" below "renesas,cmms" to preserve alphabetical sort
order.
Fixes:
06711e6385a4ab4c ("drm: rcar-du: Document the vsps property in the DT bindings")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Jacopo Mondi [Wed, 16 Oct 2019 08:55:46 +0000 (10:55 +0200)]
drm: rcar-du: crtc: Register GAMMA_LUT properties
Enable the GAMMA_LUT KMS property using the framework helpers to
register the property and set the associated gamma table maximum size.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Jacopo Mondi [Thu, 17 Oct 2019 13:44:09 +0000 (15:44 +0200)]
drm: rcar-du: crtc: Control CMM operations
Implement CMM handling in the crtc begin and enable atomic callbacks,
and enable CMM unit through the Display Extensional Functions
register at group setup time.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
[Fix printk format modifier for size_t variable]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Jacopo Mondi [Wed, 16 Oct 2019 08:55:44 +0000 (10:55 +0200)]
drm: rcar-du: kms: Initialize CMM instances
Implement device tree parsing to collect the available CMM instances
described by the 'renesas,cmms' property. Associate CMMs with CRTCs and
store a mask of active CMMs in the DU group for later enablement.
Enforce the probe and suspend/resume ordering of DU and CMM by creating
a stateless device link between the two.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Jacopo Mondi [Thu, 17 Oct 2019 13:43:32 +0000 (15:43 +0200)]
drm: rcar-du: Add support for CMM
Add a driver for the R-Car Display Unit Color Correction Module.
In most of Gen3 SoCs, each DU output channel is provided with a CMM unit
to perform image enhancement and color correction.
Add support for CMM through a driver that supports configuration of
the 1-dimensional LUT table. More advanced CMM features will be
implemented on top of this initial one.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Jacopo Mondi [Wed, 16 Oct 2019 08:55:42 +0000 (10:55 +0200)]
dt-bindings: display: renesas,du: Document cmms property
Document the newly added 'renesas,cmms' property which accepts a list of
phandle and channel index pairs that point to the CMM units available
for each Display Unit output video channel.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Jacopo Mondi [Wed, 16 Oct 2019 08:55:41 +0000 (10:55 +0200)]
dt-bindings: display: renesas,cmm: Add R-Car CMM documentation
Add device tree bindings documentation for the Renesas R-Car Display
Unit Color Management Module.
CMM is the image enhancement module available on each R-Car DU video
channel on R-Car Gen2 and Gen3 SoCs (V3H and V3M excluded).
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Daniel Vetter [Tue, 17 Dec 2019 17:47:46 +0000 (18:47 +0100)]
Merge tag 'drm-next-5.6-2019-12-11' of git://people.freedesktop.org/~agd5f/linux into drm-next
drm-next-5.6-2019-12-11:
amdgpu:
- Add MST atomic routines
- Add support for DMCUB (new helper microengine for displays)
- Add OEM i2c support in DC
- Use vstartup for vblank events on DCN
- Simplify Kconfig for DC
- Renoir fixes for DC
- Clean up function pointers in DC
- Initial support for HDCP 2.x
- Misc code cleanups
- GFX10 fixes
- Rework JPEG engine handling for VCN
- Add clock and power gating support for JPEG
- BACO support for Arcturus
- Cleanup PSP ring handling
- Add framework for using BACO with runtime pm to save power
- Move core pci state handling out of the driver for pm ops
- Allow guest power control in 1 VF case with SR-IOV
- SR-IOV fixes
- RAS fixes
- Support for power metrics on renoir
- Golden settings updates for gfx10
- Enable gfxoff on supported navi10 skus
- Update MAINTAINERS
amdkfd:
- Clean up generational gfx code
- Fixes for gfx10
- DIQ fixes
- Share more code with amdgpu
radeon:
- PPC DMA fix
- Register checker fixes for r1xx/r2xx
- Misc cleanups
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211223020.7510-1-alexander.deucher@amd.com
Daniel Vetter [Tue, 17 Dec 2019 13:27:04 +0000 (14:27 +0100)]
Merge tag 'arcpgu-updates-2019.12.16' of github.com:abrodkin/linux into drm-next
Clean-up and fixes for FourCC handling in ARC PGU.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CY4PR1201MB01204228B5788F0A6619FE45A1510@CY4PR1201MB0120.namprd12.prod.outlook.com