OSDN Git Service
Linus Torvalds [Sat, 12 Mar 2016 00:34:18 +0000 (16:34 -0800)]
Merge tag 'for-linus-
20160311' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"Late MTD fix for v4.5:
- A simple error code handling fix for the NAND ECC test; this was a
regression in v4.5-rc1
- A MAINTAINERS update, which might as well go in ASAP"
* tag 'for-linus-
20160311' of git://git.infradead.org/linux-mtd:
MAINTAINERS: add a maintainer for the NAND subsystem
mtd: nand: tests: fix regression introduced in mtd_nandectest
Linus Torvalds [Sat, 12 Mar 2016 00:19:23 +0000 (16:19 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm/i915 fixes from Dave Airlie:
"Just two i915 regression fixes, that should be it from me"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Actually retry with bit-banging after GMBUS timeout
drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW
Matthew Dawson [Fri, 11 Mar 2016 21:08:07 +0000 (13:08 -0800)]
mm/mempool: avoid KASAN marking mempool poison checks as use-after-free
When removing an element from the mempool, mark it as unpoisoned in KASAN
before verifying its contents for SLUB/SLAB debugging. Otherwise KASAN
will flag the reads checking the element use-after-free writes as
use-after-free reads.
Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 11 Mar 2016 20:35:54 +0000 (12:35 -0800)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Two more fixes for 4.5:
- One is a fix for OMAP that is urgently needed to avoid DRA7xx chips
from premature aging, by always keeping the Ethernet clock enabled.
- The other solves a I/O memory layout issue on Armada, where SROM
and PCI memory windows were conflicting in some configurations"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window
ARM: dts: dra7: do not gate cpsw clock due to errata i877
ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
Linus Torvalds [Fri, 11 Mar 2016 20:32:02 +0000 (12:32 -0800)]
Merge tag 'media/v4.5-5' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
"One last time fix: It adds a code that prevents some media tools like
media-ctl to hide some entities that have their IDs out of the range
expected by those apps"
* tag 'media/v4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] media-device: map new functions into old types for legacy API
Thomas Petazzoni [Tue, 8 Mar 2016 15:59:57 +0000 (16:59 +0100)]
ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window
When the Crypto SRAM mappings were added to the Device Tree files
describing the Armada XP boards in commit
c466d997bb16 ("ARM: mvebu:
define crypto SRAM ranges for all armada-xp boards"), the fact that
those mappings were overlaping with the PCIe memory aperture was
overlooked. Due to this, we currently have for all Armada XP platforms
a situation that looks like this:
Memory mapping on Armada XP boards with internal registers at
0xf1000000:
- 0x00000000 -> 0xf0000000 3.75G RAM
- 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB)
- 0xf1000000 -> 0xf1100000 1M internal registers
- 0xf8000000 -> 0xffe0000 126M PCIe memory aperture
- 0xf8100000 -> 0xf8110000 64KB Crypto SRAM #0 => OVERLAPS WITH PCIE !
- 0xf8110000 -> 0xf8120000 64KB Crypto SRAM #1 => OVERLAPS WITH PCIE !
- 0xffe00000 -> 0xfff00000 1M PCIe I/O aperture
- 0xfff0000 -> 0xffffffff 1M BootROM
The overlap means that when PCIe devices are added, depending on their
memory window needs, they might or might not be mapped into the
physical address space. Indeed, they will not be mapped if the area
allocated in the PCIe memory aperture by the PCI core overlaps with
one of the Crypto SRAM. Typically, a Intel IGB PCIe NIC that needs 8MB
of PCIe memory will see its PCIe memory window allocated from
0xf80000000 for 8MB, which overlaps with the Crypto SRAM windows. Due
to this, the PCIe window is not created, and any attempt to access the
PCIe window makes the kernel explode:
[ 3.302213] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.307841] pci 0000:00:09.0: enabling device (0140 -> 0143)
[ 3.313539] mvebu_mbus: cannot add window '4:f8', conflicts with another window
[ 3.320870] mvebu-pcie soc:pcie-controller: Could not create MBus window at [mem 0xf8000000-0xf87fffff]: -22
[ 3.330811] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf08c0018
This problem does not occur on Armada 370 boards, because we use the
following memory mapping (for boards that have internal registers at
0xf1000000):
- 0x00000000 -> 0xf0000000 3.75G RAM
- 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB)
- 0xf1000000 -> 0xf1100000 1M internal registers
- 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0 => OK !
- 0xf8000000 -> 0xffe0000 126M PCIe memory
- 0xffe00000 -> 0xfff00000 1M PCIe I/O
- 0xfff0000 -> 0xffffffff 1M BootROM
Obviously, the solution is to align the location of the Crypto SRAM
mappings of Armada XP to be similar with the ones on Armada 370, i.e
have them between the "internal registers" area and the beginning of
the PCIe aperture.
However, we have a special case with the OpenBlocks AX3-4 platform,
which has a 128 MB NOR flash. Currently, this NOR flash is mapped from
0xf0000000 to 0xf8000000. This is possible because on OpenBlocks
AX3-4, the internal registers are not at 0xf1000000. And this explains
why the Crypto SRAM mappings were not configured at the same place on
Armada XP.
Hence, the solution is two-fold:
(1) Move the NOR flash mapping on Armada XP OpenBlocks AX3-4 from
0xe8000000 to 0xf0000000. This frees the 0xf0000000 ->
0xf80000000 space.
(2) Move the Crypto SRAM mappings on Armada XP to be similar to
Armada 370 (except of course that Armada XP has two Crypto SRAM
and not one).
After this patch, the memory mapping on Armada XP boards with
registers at 0xf1 is:
- 0x00000000 -> 0xf0000000 3.75G RAM
- 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB)
- 0xf1000000 -> 0xf1100000 1M internal registers
- 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0
- 0xf1110000 -> 0xf1120000 64KB Crypto SRAM #1
- 0xf8000000 -> 0xffe0000 126M PCIe memory
- 0xffe00000 -> 0xfff00000 1M PCIe I/O
- 0xfff0000 -> 0xffffffff 1M BootROM
And the memory mapping for the special case of the OpenBlocks AX3-4
(internal registers at 0xd0000000, NOR of 128 MB):
- 0x00000000 -> 0xc0000000 3G RAM
- 0xd0000000 -> 0xd1000000 1M internal registers
- 0xe800000 -> 0xf0000000 128M NOR flash
- 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0
- 0xf1110000 -> 0xf1120000 64KB Crypto SRAM #1
- 0xf8000000 -> 0xffe0000 126M PCIe memory
- 0xffe00000 -> 0xfff00000 1M PCIe I/O
- 0xfff0000 -> 0xffffffff 1M BootROM
Fixes:
c466d997bb16 ("ARM: mvebu: define crypto SRAM ranges for all armada-xp boards")
Reported-by: Phil Sutter <phil@nwl.cc>
Cc: Phil Sutter <phil@nwl.cc>
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Fri, 11 Mar 2016 18:57:18 +0000 (10:57 -0800)]
Merge tag 'dmaengine-fix-4.5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Two fixes showed up in last few days, and they should be included in
4.5. Summary:
Two more late fixes to drivers, nothing major here:
- A memory leak fix in fsdma unmap the dma descriptors on freeup
- A fix in xdmac driver for residue calculation of dma descriptor"
* tag 'dmaengine-fix-4.5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: at_xdmac: fix residue computation
dmaengine: fsldma: fix memory leak
Linus Torvalds [Fri, 11 Mar 2016 18:45:03 +0000 (10:45 -0800)]
Merge tag 'pm+acpi-4.5-final' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"Two more fixes for issues introduced recently, one in the generic
device properties framework and one in ACPICA.
Specifics:
- Revert a recent ACPICA commit that has been reverted upstream,
because it caused problems to happen on user systems and the
problem it attempted to address will not be relevant any more after
upcoming ACPI specification changes (Bob Moore).
- Fix crash in the generic device properties framework introduced by
a recent change that forgot to check pointers against error values
in addition to checking them against NULL (Heikki Krogerus)"
* tag 'pm+acpi-4.5-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
ACPICA: Revert "Parser: Fix for SuperName method invocation"
Linus Torvalds [Fri, 11 Mar 2016 18:21:32 +0000 (10:21 -0800)]
Merge tag 'xfs-for-linus-4.5-rc7' of git://git./linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"This is a fix for a regression introduced in 4.5-rc1 by the new torn
log write detection code. The regression only affects people moving a
clean filesystem between machines/kernels of different architecture
(such as changing between 32 bit and 64 bit kernels), but this is the
recommended (and only!) safe way to migrate a filesystem between
architectures so we really need to ensure it works.
The changes are larger than I'd prefer right at the end of the release
cycle, but the majority of the change is just factoring code to enable
the detection of a clean log at the correct time to avoid this issue.
Changes:
- Only perform torn log write detection on dirty logs. This prevents
failures being detected due to a clean filesystem being moved
between machines or kernels of different architectures (e.g. 32 ->
64 bit, BE -> LE, etc). This fixes a regression introduced by the
torn log write detection in 4.5-rc1"
* tag 'xfs-for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: only run torn log write detection on dirty logs
xfs: refactor in-core log state update to helper
xfs: refactor unmount record detection into helper
xfs: separate log head record discovery from verification
Linus Torvalds [Fri, 11 Mar 2016 18:13:49 +0000 (10:13 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple of fixes: Fix for my dumb braino in ncpfs and a long-standing
breakage on recovery from failed rename() in jffs2"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
jffs2: reduce the breakage on recovery from halfway failed rename()
ncpfs: fix a braino in OOM handling in ncp_fill_cache()
Rafael J. Wysocki [Fri, 11 Mar 2016 13:22:54 +0000 (14:22 +0100)]
Merge branches 'device-properties-fixes' and 'acpica-fixes'
* device-properties-fixes:
device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
* acpica-fixes:
ACPICA: Revert "Parser: Fix for SuperName method invocation"
Ville Syrjälä [Mon, 7 Mar 2016 15:56:57 +0000 (17:56 +0200)]
drm/i915: Actually retry with bit-banging after GMBUS timeout
After the GMBUS transfer times out, we set force_bit=1 and
return -EAGAIN expecting the i2c core to call the .master_xfer
hook again so that we will retry the same transfer via bit-banging.
This is in case the gmbus hardware is somehow faulty.
Unfortunately we left adapter->retries to 0, meaning the i2c core
didn't actually do the retry. Let's tell the core we want one retry
when we return -EAGAIN.
Note that i2c-algo-bit also uses this retry count for some internal
retries, so we'll end up increasing those a bit as well.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes:
bffce907d640 ("drm/i915: abstract i2c bit banging fallback in gmbus xfer")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457366220-29409-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit
8b1f165a4a8f64c28cf42d10e1f4d3b451dedc51)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Boris BREZILLON [Wed, 9 Mar 2016 20:57:24 +0000 (21:57 +0100)]
MAINTAINERS: add a maintainer for the NAND subsystem
Add myself as the maintainer of the NAND subsystem.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Linus Torvalds [Thu, 10 Mar 2016 18:42:15 +0000 (10:42 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"A few simple fixes for ARM, x86, PPC and generic code.
The x86 MMU fix is a bit larger because the surrounding code needed a
cleanup, but nothing worrisome"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: MMU: fix reserved bit check for ept=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0
KVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 combo
kvm: cap halt polling at exactly halt_poll_ns
KVM: s390: correct fprs on SIGP (STOP AND) STORE STATUS
KVM: VMX: disable PEBS before a guest entry
KVM: PPC: Book3S HV: Sanitize special-purpose register values on guest exit
Linus Torvalds [Thu, 10 Mar 2016 18:39:04 +0000 (10:39 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I thought we were done for 4.5, but then the 64k-page chaps came
crawling out of the woodwork. *sigh*
The vmemmap fix I sent for -rc7 caused a regression with 64k pages and
sparsemem and at some point during the release cycle the new hugetlb
code using contiguous ptes started failing the libhugetlbfs tests with
64k pages enabled.
So here are a couple of patches that fix the vmemmap alignment and
disable the new hugetlb page sizes whilst a proper fix is being
developed:
- Temporarily disable huge pages built using contiguous ptes
- Ensure vmemmap region is sufficiently aligned for sparsemem
sections"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: partial revert of
66b3923a1a0f
arm64: account for sparsemem section alignment when choosing vmemmap offset
Linus Torvalds [Thu, 10 Mar 2016 18:36:07 +0000 (10:36 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Three bug fixes:
- The fix for the page table corruption (CVE-2016-2143)
- The diagnose statistics introduced a regression for the dasd diag
driver
- Boot crash on systems without the set-program-parameters facility"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: four page table levels vs. fork
s390/cpumf: Fix lpp detection
s390/dasd: fix diag 0x250 inline assembly
Mauro Carvalho Chehab [Sat, 5 Mar 2016 10:13:39 +0000 (07:13 -0300)]
[media] media-device: map new functions into old types for legacy API
The legacy media controller userspace API exposes entity types that
carry both type and function information. The new API replaces the type
with a function. It preserves backward compatibility by defining legacy
functions for the existing types and using them in drivers.
This works fine, as long as newer entity functions won't be added.
Unfortunately, some tools, like media-ctl with --print-dot argument
rely on the now legacy MEDIA_ENT_T_V4L2_SUBDEV and MEDIA_ENT_T_DEVNODE
numeric ranges to identify what entities will be shown.
Also, if the entity doesn't match those ranges, it will ignore the
major/minor information on devnodes, and won't be getting the devnode
name via udev or sysfs.
As we're now adding devices outside the old range, the legacy ioctl
needs to map the new entity functions into a type at the old range,
or otherwise we'll have a regression.
Detected on all released media-ctl versions (e. g. versions <= 1.10).
Fix this by deriving the type from the function to emulate the legacy
API if the function isn't in the legacy functions range.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Ludovic Desroches [Thu, 10 Mar 2016 09:17:55 +0000 (10:17 +0100)]
dmaengine: at_xdmac: fix residue computation
When computing the residue we need two pieces of information: the current
descriptor and the remaining data of the current descriptor. To get
that information, we need to read consecutively two registers but we
can't do it in an atomic way. For that reason, we have to check manually
that current descriptor has not changed.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Suggested-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Reported-by: David Engraf <david.engraf@sysgo.com>
Tested-by: David Engraf <david.engraf@sysgo.com>
Fixes:
e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel
eXtended DMA Controller driver")
Cc: stable@vger.kernel.org #4.1 and later
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Paolo Bonzini [Wed, 9 Mar 2016 13:28:02 +0000 (14:28 +0100)]
KVM: MMU: fix reserved bit check for ept=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0
KVM has special logic to handle pages with pte.u=1 and pte.w=0 when
CR0.WP=1. These pages' SPTEs flip continuously between two states:
U=1/W=0 (user and supervisor reads allowed, supervisor writes not allowed)
and U=0/W=1 (supervisor reads and writes allowed, user writes not allowed).
When SMEP is in effect, however, U=0 will enable kernel execution of
this page. To avoid this, KVM also sets NX=1 in the shadow PTE together
with U=0, making the two states U=1/W=0/NX=gpte.NX and U=0/W=1/NX=1.
When guest EFER has the NX bit cleared, the reserved bit check thinks
that the latter state is invalid; teach it that the smep_andnot_wp case
will also use the NX bit of SPTEs.
Cc: stable@vger.kernel.org
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.inel.com>
Fixes:
c258b62b264fdc469b6d3610a907708068145e3b
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 8 Mar 2016 11:13:39 +0000 (12:13 +0100)]
KVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 combo
Yes, all of these are needed. :) This is admittedly a bit odd, but
kvm-unit-tests access.flat tests this if you run it with "-cpu host"
and of course ept=0.
KVM runs the guest with CR0.WP=1, so it must handle supervisor writes
specially when pte.u=1/pte.w=0/CR0.WP=0. Such writes cause a fault
when U=1 and W=0 in the SPTE, but they must succeed because CR0.WP=0.
When KVM gets the fault, it sets U=0 and W=1 in the shadow PTE and
restarts execution. This will still cause a user write to fault, while
supervisor writes will succeed. User reads will fault spuriously now,
and KVM will then flip U and W again in the SPTE (U=1, W=0). User reads
will be enabled and supervisor writes disabled, going back to the
originary situation where supervisor writes fault spuriously.
When SMEP is in effect, however, U=0 will enable kernel execution of
this page. To avoid this, KVM also sets NX=1 in the shadow PTE together
with U=0. If the guest has not enabled NX, the result is a continuous
stream of page faults due to the NX bit being reserved.
The fix is to force EFER.NX=1 even if the CPU is taking care of the EFER
switch. (All machines with SMEP have the CPU_LOAD_IA32_EFER vm-entry
control, so they do not use user-return notifiers for EFER---if they did,
EFER.NX would be forced to the same value as the host).
There is another bug in the reserved bit check, which I've split to a
separate patch for easier application to stable kernels.
Cc: stable@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Fixes:
f6577a5fa15d82217ca73c74cd2dcbc0f6c781dd
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Martin Schwidefsky [Mon, 15 Feb 2016 13:46:49 +0000 (14:46 +0100)]
s390/mm: four page table levels vs. fork
The fork of a process with four page table levels is broken since
git commit
6252d702c5311ce9 "[S390] dynamic page tables."
All new mm contexts are created with three page table levels and
an asce limit of 4TB. If the parent has four levels dup_mmap will
add vmas to the new context which are outside of the asce limit.
The subsequent call to copy_page_range will walk the three level
page table structure of the new process with non-zero pgd and pud
indexes. This leads to memory clobbers as the pgd_index *and* the
pud_index is added to the mm->pgd pointer without a pgd_deref
in between.
The init_new_context() function is selecting the number of page
table levels for a new context. The function is used by mm_init()
which in turn is called by dup_mm() and mm_alloc(). These two are
used by fork() and exec(). The init_new_context() function can
distinguish the two cases by looking at mm->context.asce_limit,
for fork() the mm struct has been copied and the number of page
table levels may not change. For exec() the mm_alloc() function
set the new mm structure to zero, in this case a three-level page
table is created as the temporary stack space is located at
STACK_TOP_MAX = 4TB.
This fixes CVE-2016-2143.
Reported-by: Marcin Kościelnicki <koriakin@0x04.net>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Linus Torvalds [Thu, 10 Mar 2016 04:24:23 +0000 (20:24 -0800)]
Merge tag 'spi-fix-v4.5-rc7' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes for the Rockchip and i.MX SPI controllers,
especially for the i.MX they're annoying bugs if you run into them"
* tag 'spi-fix-v4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: fix spi resource leak with dma transfer
spi: imx: allow only WML aligned transfers to use DMA
spi: rockchip: add missing spi_master_put
spi: rockchip: disable runtime pm when in err case
Mark Brown [Thu, 10 Mar 2016 03:42:24 +0000 (10:42 +0700)]
Merge remote-tracking branch 'spi/fix/rockchip' into spi-linus
Mark Brown [Thu, 10 Mar 2016 03:42:22 +0000 (10:42 +0700)]
Merge remote-tracking branch 'spi/fix/imx' into spi-linus
Linus Torvalds [Thu, 10 Mar 2016 03:33:05 +0000 (19:33 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fix from Ted Ts'o:
"This fixes a regression which crept in v4.5-rc5"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: iterate over buffer heads correctly in move_extent_per_page()
Linus Torvalds [Thu, 10 Mar 2016 03:12:37 +0000 (19:12 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A few imx fixes I missed from a couple of weeks ago, they still aren't
that big and fix some regression and a fail to boot problem.
Other than that, a couple of regression fixes for radeon/amdgpu, one
regression fix for vmwgfx and one regression fix for tda998x"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
Revert "drm/radeon/pm: adjust display configuration after powerstate"
drm/amdgpu/dp: add back special handling for NUTMEG
drm/radeon/dp: add back special handling for NUTMEG
drm/i2c: tda998x: Choose between atomic or non atomic dpms helper
drm/vmwgfx: Add back ->detect() and ->fill_modes()
drm/radeon: Fix error handling in radeon_flip_work_func.
drm/amdgpu: Fix error handling in amdgpu_flip_work_func.
drm/imx: Add missing DRM_FORMAT_RGB565 to ipu_plane_formats
drm/imx: notify DRM core about CRTC vblank state
gpu: ipu-v3: Reset IPU before activating IRQ
gpu: ipu-v3: Do not bail out on missing optional port nodes
Linus Torvalds [Thu, 10 Mar 2016 03:01:58 +0000 (19:01 -0800)]
Merge tag 'trace-fixes-v4.5-rc7' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"I previously sent a fix that prevents all trace events from being
called if the current cpu is offline.
But I forgot that in 3.18, we added lockdep checks to test RCU usage
even when the event is disabled. Although there cannot be any bug
when a cpu is going offline, we now get false warnings triggered by
the added checks of the event being disabled.
I removed the check from the tracepoint code itself, and added it to
the condition section (which is "1" for 'no condition'). This way the
online cpu check will get checked in all the right locations"
* tag 'trace-fixes-v4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix check for cpu online when event is disabled
Eryu Guan [Sun, 21 Feb 2016 23:38:44 +0000 (18:38 -0500)]
ext4: iterate over buffer heads correctly in move_extent_per_page()
In commit
bcff24887d00 ("ext4: don't read blocks from disk after extents
being swapped") bh is not updated correctly in the for loop and wrong
data has been written to disk. generic/324 catches this on sub-page
block size ext4.
Fixes:
bcff24887d00 ("ext4: don't read blocks from disk after extentsbeing swapped")
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Linus Torvalds [Thu, 10 Mar 2016 02:27:52 +0000 (18:27 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
dma-mapping: avoid oops when parameter cpu_addr is null
mm/hugetlb: use EOPNOTSUPP in hugetlb sysctl handlers
memremap: check pfn validity before passing to pfn_to_page()
mm, thp: fix migration of PTE-mapped transparent huge pages
dax: check return value of dax_radix_entry()
ocfs2: fix return value from ocfs2_page_mkwrite()
arm64: kasan: clear stale stack poison
sched/kasan: remove stale KASAN poison after hotplug
kasan: add functions to clear stack poison
mm: fix mixed zone detection in devm_memremap_pages
list: kill list_force_poison()
mm: __delete_from_page_cache show Bad page if mapped
mm/hugetlb: hugetlb_no_page: rate-limit warning message
Zhen Lei [Wed, 9 Mar 2016 22:08:38 +0000 (14:08 -0800)]
dma-mapping: avoid oops when parameter cpu_addr is null
To keep consistent with kfree, which tolerate ptr is NULL. We do this
because sometimes we may use goto statement, so that success and failure
case can share parts of the code. But unfortunately, dma_free_coherent
called with parameter cpu_addr is null will cause oops, such as showed
below:
Unable to handle kernel paging request at virtual address
ffffffc020d3b2b8
pgd =
ffffffc083a61000
[
ffffffc020d3b2b8] *pgd=
0000000000000000, *pud=
0000000000000000
CPU: 4 PID: 1489 Comm: malloc_dma_1 Tainted: G O 4.1.12 #1
Hardware name: ARM64 (DT)
PC is at __dma_free_coherent.isra.10+0x74/0xc8
LR is at __dma_free+0x9c/0xb0
Process malloc_dma_1 (pid: 1489, stack limit = 0xffffffc0837fc020)
[...]
Call trace:
__dma_free_coherent.isra.10+0x74/0xc8
__dma_free+0x9c/0xb0
malloc_dma+0x104/0x158 [dma_alloc_coherent_mtmalloc]
kthread+0xec/0xfc
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Stancek [Wed, 9 Mar 2016 22:08:35 +0000 (14:08 -0800)]
mm/hugetlb: use EOPNOTSUPP in hugetlb sysctl handlers
Replace ENOTSUPP with EOPNOTSUPP. If hugepages are not supported, this
value is propagated to userspace. EOPNOTSUPP is part of uapi and is
widely supported by libc libraries.
It gives nicer message to user, rather than:
# cat /proc/sys/vm/nr_hugepages
cat: /proc/sys/vm/nr_hugepages: Unknown error 524
And also LTP's proc01 test was failing because this ret code (524)
was unexpected:
proc01 1 TFAIL : proc01.c:396: read failed: /proc/sys/vm/nr_hugepages: errno=???(524): Unknown error 524
proc01 2 TFAIL : proc01.c:396: read failed: /proc/sys/vm/nr_hugepages_mempolicy: errno=???(524): Unknown error 524
proc01 3 TFAIL : proc01.c:396: read failed: /proc/sys/vm/nr_overcommit_hugepages: errno=???(524): Unknown error 524
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ard Biesheuvel [Wed, 9 Mar 2016 22:08:32 +0000 (14:08 -0800)]
memremap: check pfn validity before passing to pfn_to_page()
In memremap's helper function try_ram_remap(), we dereference a struct
page pointer that was derived from a PFN that is known to be covered by
a 'System RAM' iomem region, and is thus assumed to be a 'valid' PFN,
i.e., a PFN that has a struct page associated with it and is covered by
the kernel direct mapping.
However, the assumption that there is a 1:1 relation between the System
RAM iomem region and the kernel direct mapping is not universally valid
on all architectures, and on ARM and arm64, 'System RAM' may include
regions for which pfn_valid() returns false.
Generally speaking, both __va() and pfn_to_page() should only ever be
called on PFNs/physical addresses for which pfn_valid() returns true, so
add that check to try_ram_remap().
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Wed, 9 Mar 2016 22:08:30 +0000 (14:08 -0800)]
mm, thp: fix migration of PTE-mapped transparent huge pages
We don't have native support of THP migration, so we have to split huge
page into small pages in order to migrate it to different node. This
includes PTE-mapped huge pages.
I made mistake in refcounting patchset: we don't actually split
PTE-mapped huge page in queue_pages_pte_range(), if we step on head
page.
The result is that the head page is queued for migration, but none of
tail pages: putting head page on queue takes pin on the page and any
subsequent attempts of split_huge_pages() would fail and we skip queuing
tail pages.
unmap_and_move_huge_page() will eventually split the huge pages, but
only one of 512 pages would get migrated.
Let's fix the situation.
Fixes:
248db92da13f2507 ("migrate_pages: try to split pages on queuing")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ross Zwisler [Wed, 9 Mar 2016 22:08:27 +0000 (14:08 -0800)]
dax: check return value of dax_radix_entry()
dax_pfn_mkwrite() previously wasn't checking the return value of the
call to dax_radix_entry(), which was a mistake.
Instead, capture this return value and return the appropriate VM_FAULT_
value.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 9 Mar 2016 22:08:24 +0000 (14:08 -0800)]
ocfs2: fix return value from ocfs2_page_mkwrite()
ocfs2_page_mkwrite() could mistakenly return error code instead of
mkwrite status value. Fix it.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Rutland [Wed, 9 Mar 2016 22:08:21 +0000 (14:08 -0800)]
arm64: kasan: clear stale stack poison
Functions which the compiler has instrumented for KASAN place poison on
the stack shadow upon entry and remove this poison prior to returning.
In the case of cpuidle, CPUs exit the kernel a number of levels deep in
C code. Any instrumented functions on this critical path will leave
portions of the stack shadow poisoned.
If CPUs lose context and return to the kernel via a cold path, we
restore a prior context saved in __cpu_suspend_enter are forgotten, and
we never remove the poison they placed in the stack shadow area by
functions calls between this and the actual exit of the kernel.
Thus, (depending on stackframe layout) subsequent calls to instrumented
functions may hit this stale poison, resulting in (spurious) KASAN
splats to the console.
To avoid this, clear any stale poison from the idle thread for a CPU
prior to bringing a CPU online.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Rutland [Wed, 9 Mar 2016 22:08:18 +0000 (14:08 -0800)]
sched/kasan: remove stale KASAN poison after hotplug
Functions which the compiler has instrumented for KASAN place poison on
the stack shadow upon entry and remove this poision prior to returning.
In the case of CPU hotplug, CPUs exit the kernel a number of levels deep
in C code. Any instrumented functions on this critical path will leave
portions of the stack shadow poisoned.
When a CPU is subsequently brought back into the kernel via a different
path, depending on stackframe, layout calls to instrumented functions
may hit this stale poison, resulting in (spurious) KASAN splats to the
console.
To avoid this, clear any stale poison from the idle thread for a CPU
prior to bringing a CPU online.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Rutland [Wed, 9 Mar 2016 22:08:15 +0000 (14:08 -0800)]
kasan: add functions to clear stack poison
Functions which the compiler has instrumented for ASAN place poison on
the stack shadow upon entry and remove this poison prior to returning.
In some cases (e.g. hotplug and idle), CPUs may exit the kernel a
number of levels deep in C code. If there are any instrumented
functions on this critical path, these will leave portions of the idle
thread stack shadow poisoned.
If a CPU returns to the kernel via a different path (e.g. a cold
entry), then depending on stack frame layout subsequent calls to
instrumented functions may use regions of the stack with stale poison,
resulting in (spurious) KASAN splats to the console.
Contemporary GCCs always add stack shadow poisoning when ASAN is
enabled, even when asked to not instrument a function [1], so we can't
simply annotate functions on the critical path to avoid poisoning.
Instead, this series explicitly removes any stale poison before it can
be hit. In the common hotplug case we clear the entire stack shadow in
common code, before a CPU is brought online.
On architectures which perform a cold return as part of cpu idle may
retain an architecture-specific amount of stack contents. To retain the
poison for this retained context, the arch code must call the core KASAN
code, passing a "watermark" stack pointer value beyond which shadow will
be cleared. Architectures which don't perform a cold return as part of
idle do not need any additional code.
This patch (of 3):
Functions which the compiler has instrumented for KASAN place poison on
the stack shadow upon entry and remove this poision prior to returning.
In some cases (e.g. hotplug and idle), CPUs may exit the kernel a number
of levels deep in C code. If there are any instrumented functions on this
critical path, these will leave portions of the stack shadow poisoned.
If a CPU returns to the kernel via a different path (e.g. a cold entry),
then depending on stack frame layout subsequent calls to instrumented
functions may use regions of the stack with stale poison, resulting in
(spurious) KASAN splats to the console.
To avoid this, we must clear stale poison from the stack prior to
instrumented functions being called. This patch adds functions to the
KASAN core for removing poison from (portions of) a task's stack. These
will be used by subsequent patches to avoid problems with hotplug and
idle.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Wed, 9 Mar 2016 22:08:13 +0000 (14:08 -0800)]
mm: fix mixed zone detection in devm_memremap_pages
The check for whether we overlap "System RAM" needs to be done at
section granularity. For example a system with the following mapping:
100000000-
37bffffff : System RAM
37c000000-
837ffffff : Persistent Memory
...is unable to use devm_memremap_pages() as it would result in two
zones colliding within a given section.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Wed, 9 Mar 2016 22:08:10 +0000 (14:08 -0800)]
list: kill list_force_poison()
Given we have uninitialized list_heads being passed to list_add() it
will always be the case that those uninitialized values randomly trigger
the poison value. Especially since a list_add() operation will seed the
stack with the poison value for later stack allocations to trip over.
For example, see these two false positive reports:
list_add attempted on force-poisoned entry
WARNING: at lib/list_debug.c:34
[..]
NIP [
c00000000043c390] __list_add+0xb0/0x150
LR [
c00000000043c38c] __list_add+0xac/0x150
Call Trace:
__list_add+0xac/0x150 (unreliable)
__down+0x4c/0xf8
down+0x68/0x70
xfs_buf_lock+0x4c/0x150 [xfs]
list_add attempted on force-poisoned entry(
0000000000000500),
new->next ==
d0000000059ecdb0, new->prev ==
0000000000000500
WARNING: at lib/list_debug.c:33
[..]
NIP [
c00000000042db78] __list_add+0xa8/0x140
LR [
c00000000042db74] __list_add+0xa4/0x140
Call Trace:
__list_add+0xa4/0x140 (unreliable)
rwsem_down_read_failed+0x6c/0x1a0
down_read+0x58/0x60
xfs_log_commit_cil+0x7c/0x600 [xfs]
Fixes: commit
5c2c2587b132 ("mm, dax, pmem: introduce {get|put}_dev_pagemap() for dax-gup")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Eryu Guan <eguan@redhat.com>
Tested-by: Eryu Guan <eguan@redhat.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 9 Mar 2016 22:08:07 +0000 (14:08 -0800)]
mm: __delete_from_page_cache show Bad page if mapped
Commit
e1534ae95004 ("mm: differentiate page_mapped() from
page_mapcount() for compound pages") changed the famous
BUG_ON(page_mapped(page)) in __delete_from_page_cache() to
VM_BUG_ON_PAGE(page_mapped(page)): which gives us more info when
CONFIG_DEBUG_VM=y, but nothing at all when not.
Although it has not usually been very helpul, being hit long after the
error in question, we do need to know if it actually happens on users'
systems; but reinstating a crash there is likely to be opposed :)
In the non-debug case, pr_alert("BUG: Bad page cache") plus dump_page(),
dump_stack(), add_taint() - I don't really believe LOCKDEP_NOW_UNRELIABLE,
but that seems to be the standard procedure now. Move that, or the
VM_BUG_ON_PAGE(), up before the deletion from tree: so that the
unNULLified page->mapping gives a little more information.
If the inode is being evicted (rather than truncated), it won't have any
vmas left, so it's safe(ish) to assume that the raised mapcount is
erroneous, and we can discount it from page_count to avoid leaking the
page (I'm less worried by leaking the occasional 4kB, than losing a
potential 2MB page with each 4kB page leaked).
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geoffrey Thomas [Wed, 9 Mar 2016 22:08:04 +0000 (14:08 -0800)]
mm/hugetlb: hugetlb_no_page: rate-limit warning message
The warning message "killed due to inadequate hugepage pool" simply
indicates that SIGBUS was sent, not that the process was forcibly killed.
If the process has a signal handler installed does not fix the problem,
this message can rapidly spam the kernel log.
On my amd64 dev machine that does not have hugepages configured, I can
reproduce the repeated warnings easily by setting vm.nr_hugepages=2 (i.e.,
4 megabytes of huge pages) and running something that sets a signal
handler and forks, like
#include <sys/mman.h>
#include <signal.h>
#include <stdlib.h>
#include <unistd.h>
sig_atomic_t counter = 10;
void handler(int signal)
{
if (counter-- == 0)
exit(0);
}
int main(void)
{
int status;
char *addr = mmap(NULL, 4 *
1048576, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB, -1, 0);
if (addr == MAP_FAILED) {perror("mmap"); return 1;}
*addr = 'x';
switch (fork()) {
case -1:
perror("fork"); return 1;
case 0:
signal(SIGBUS, handler);
*addr = 'x';
break;
default:
*addr = 'x';
wait(&status);
if (WIFSIGNALED(status)) {
psignal(WTERMSIG(status), "child");
}
break;
}
}
Signed-off-by: Geoffrey Thomas <geofft@ldpreload.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Olof Johansson [Wed, 9 Mar 2016 22:15:31 +0000 (14:15 -0800)]
Merge tag 'for-v4.5-rc/omap-critical-fixes-a' of git://git./linux/kernel/git/pjw/omap-pending into fixes
ARM: OMAP2+: critical DRA7xx fix for v4.5-rc
Force the DRA7xx Ethernet internal clock source to stay enabled
per TI erratum i877:
http://www.ti.com/lit/er/sprz429h/sprz429h.pdf
Otherwise, if the Ethernet internal clock source is disabled, the
chip will age prematurely, and the RGMII I/O timing will soon
fail to meet the delay time and skew specifications for 1000Mbps
Ethernet.
This fix should go in as soon as possible.
Basic build, boot, and PM test results are available here:
http://www.pwsan.com/omap/testlogs/omap-critical-fixes-for-v4.5-rc/
20160307014209/
* tag 'for-v4.5-rc/omap-critical-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending:
ARM: dts: dra7: do not gate cpsw clock due to errata i877
ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Wed, 9 Mar 2016 21:28:27 +0000 (13:28 -0800)]
Merge tag 'pci-v4.5-fixes-5' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Here's another fix for v4.5. It fixes an ARM regression in v4.0 that
causes many boxes to crash on boot, including cns3xxx, dove,
footbridge, iopl13xx, ip32x, iop33x, ixp4xx, ks8695, mv78xx0, orion5x,
pxa, sa1100, etc.
The change is in code that's only built for ARM and ARM64.
Summary:
Enumeration:
Allow generic PCI domains without bridge "parent" pointer (Krzysztof Hałasa)"
* tag 'pci-v4.5-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()
Steven Rostedt (Red Hat) [Wed, 9 Mar 2016 16:58:41 +0000 (11:58 -0500)]
tracing: Fix check for cpu online when event is disabled
Commit
f37755490fe9b ("tracepoints: Do not trace when cpu is offline") added
a check to make sure that tracepoints only get called when the cpu is
online, as it uses rcu_read_lock_sched() for protection.
Commit
3a630178fd5f3 ("tracing: generate RCU warnings even when tracepoints
are disabled") added lockdep checks (including rcu checks) for events that
are not enabled to catch possible RCU issues that would only be triggered if
a trace event was enabled. Commit
f37755490fe9b only stopped the warnings
when the trace event was enabled but did not prevent warnings if the trace
event was called when disabled.
To fix this, the cpu online check is moved to where the condition is added
to the trace event. This will place the cpu online check in all places that
it may be used now and in the future.
Cc: stable@vger.kernel.org # v3.18+
Fixes:
f37755490fe9b ("tracepoints: Do not trace when cpu is offline")
Fixes:
3a630178fd5f3 ("tracing: generate RCU warnings even when tracepoints are disabled")
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Will Deacon [Wed, 9 Mar 2016 15:22:55 +0000 (15:22 +0000)]
arm64: hugetlb: partial revert of
66b3923a1a0f
Commit
66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit")
introduced support for huge pages using the contiguous bit in the PTE
as opposed to block mappings, which may be slightly unwieldy (512M) in
64k page configurations.
Unfortunately, this support has resulted in some late regressions when
running the libhugetlbfs test suite with 64k pages and CONFIG_DEBUG_VM
as a result of a BUG:
| readback (2M: 64): ------------[ cut here ]------------
| kernel BUG at fs/hugetlbfs/inode.c:446!
| Internal error: Oops - BUG: 0 [#1] SMP
| Modules linked in:
| CPU: 7 PID: 1448 Comm: readback Not tainted 4.5.0-rc7 #148
| Hardware name: linux,dummy-virt (DT)
| task:
fffffe0040964b00 ti:
fffffe00c2668000 task.ti:
fffffe00c2668000
| PC is at remove_inode_hugepages+0x44c/0x480
| LR is at remove_inode_hugepages+0x264/0x480
Rather than revert the entire patch, simply avoid advertising the
contiguous huge page sizes for now while people are actively working on
a fix. This patch can then be reverted once things have been sorted out.
Cc: David Woods <dwoods@ezchip.com>
Reported-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Ard Biesheuvel [Tue, 8 Mar 2016 14:09:29 +0000 (21:09 +0700)]
arm64: account for sparsemem section alignment when choosing vmemmap offset
Commit
dfd55ad85e4a ("arm64: vmemmap: use virtual projection of linear
region") fixed an issue where the struct page array would overflow into the
adjacent virtual memory region if system RAM was placed so high up in
physical memory that its addresses were not representable in the build time
configured virtual address size.
However, the fix failed to take into account that the vmemmap region needs
to be relatively aligned with respect to the sparsemem section size, so that
a sequence of page structs corresponding with a sparsemem section in the
linear region appears naturally aligned in the vmemmap region.
So round up vmemmap to sparsemem section size. Since this essentially moves
the projection of the linear region up in memory, also revert the reduction
of the size of the vmemmap region.
Cc: <stable@vger.kernel.org>
Fixes:
dfd55ad85e4a ("arm64: vmemmap: use virtual projection of linear region")
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: David Daney <david.daney@cavium.com>
Tested-by: Robert Richter <rrichter@cavium.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
David Matlack [Wed, 9 Mar 2016 00:19:44 +0000 (16:19 -0800)]
kvm: cap halt polling at exactly halt_poll_ns
When growing halt-polling, there is no check that the poll time exceeds
the limit. It's possible for vcpu->halt_poll_ns grow once past
halt_poll_ns, and stay there until a halt which takes longer than
vcpu->halt_poll_ns. For example, booting a Linux guest with
halt_poll_ns=11000:
... kvm:kvm_halt_poll_ns: vcpu 0: halt_poll_ns 0 (shrink 10000)
... kvm:kvm_halt_poll_ns: vcpu 0: halt_poll_ns 10000 (grow 0)
... kvm:kvm_halt_poll_ns: vcpu 0: halt_poll_ns 20000 (grow 10000)
Signed-off-by: David Matlack <dmatlack@google.com>
Fixes:
aca6ff29c4063a8d467cdee241e6b3bf7dc4a171
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xuelin Shi [Tue, 8 Mar 2016 06:02:01 +0000 (14:02 +0800)]
dmaengine: fsldma: fix memory leak
adding unmap of sources and destinations while doing dequeue.
Signed-off-by: Xuelin Shi <xuelin.shi@nxp.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Dave Airlie [Wed, 9 Mar 2016 04:21:12 +0000 (14:21 +1000)]
Merge tag 'imx-drm-fixes-2016-02-19' of git://git.pengutronix.de/git/pza/linux into drm-fixes
ipu-v3 probe and imx-drm crtc and plane fixes
- Fix ipu probe if optional port nodes are not present in the device tree
- Reset the ipu before initializing interrupts, not thereafter
- Notify DRM core about the state of vblank interrupts
- Add missing RGB565 format to the list of plate formats
* tag 'imx-drm-fixes-2016-02-19' of git://git.pengutronix.de/git/pza/linux:
drm/imx: Add missing DRM_FORMAT_RGB565 to ipu_plane_formats
drm/imx: notify DRM core about CRTC vblank state
gpu: ipu-v3: Reset IPU before activating IRQ
gpu: ipu-v3: Do not bail out on missing optional port nodes
Dave Airlie [Wed, 9 Mar 2016 04:19:14 +0000 (14:19 +1000)]
Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
radeon and amdgpu fixes for 4.5. Three regression fixes and
some fixups for the error handling in the vblank regression fixes
from earlier.
* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux:
Revert "drm/radeon/pm: adjust display configuration after powerstate"
drm/amdgpu/dp: add back special handling for NUTMEG
drm/radeon/dp: add back special handling for NUTMEG
drm/radeon: Fix error handling in radeon_flip_work_func.
drm/amdgpu: Fix error handling in amdgpu_flip_work_func.
Heikki Krogerus [Tue, 8 Mar 2016 13:44:36 +0000 (15:44 +0200)]
device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
This fixes BUG triggered when fwnode->secondary is not NULL,
but has ERR_PTR(-ENODEV) instead.
BUG: unable to handle kernel paging request at
ffffffffffffffed
IP: [<
ffffffff81677b86>] __fwnode_property_read_string+0x26/0x160
PGD
200e067 PUD
2010067 PMD 0
Oops: 0000 [#1] SMP KASAN
Modules linked in: dwc3_pci(+) dwc3
CPU: 0 PID: 1138 Comm: modprobe Not tainted 4.5.0-rc5+ #61
task:
ffff88015aaf5b00 ti:
ffff88007b958000 task.ti:
ffff88007b958000
RIP: 0010:[<
ffffffff81677b86>] [<
ffffffff81677b86>] __fwnode_property_read_string+0x26/0x160
RSP: 0018:
ffff88007b95eff8 EFLAGS:
00010246
RAX:
fffffbfffffffffd RBX:
ffffffffffffffed RCX:
ffff88015999cd37
RDX:
dffffc0000000000 RSI:
ffffffff81e11bc0 RDI:
ffffffffffffffed
RBP:
ffff88007b95f020 R08:
0000000000000000 R09:
0000000000000000
R10:
ffff88007b90f7cf R11:
0000000000000000 R12:
ffff88007b95f0a0
R13:
00000000fffffffa R14:
ffffffff81e11bc0 R15:
ffff880159ea37a0
FS:
00007ff35f46c700(0000) GS:
ffff88015b800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
CR2:
ffffffffffffffed CR3:
000000007b8be000 CR4:
00000000001006f0
Stack:
ffff88015999cd20 ffffffff81e11bc0 ffff88007b95f0a0 ffff88007b383dd8
ffff880159ea37a0 ffff88007b95f048 ffffffff81677d03 ffff88007b952460
ffffffff81e11bc0 ffff88007b95f0a0 ffff88007b95f070 ffffffff81677d40
Call Trace:
[<
ffffffff81677d03>] fwnode_property_read_string+0x43/0x50
[<
ffffffff81677d40>] device_property_read_string+0x30/0x40
...
Fixes:
362c0b30249e (device property: Fallback to secondary fwnode if primary misses the property)
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bob Moore [Fri, 19 Feb 2016 06:17:36 +0000 (14:17 +0800)]
ACPICA: Revert "Parser: Fix for SuperName method invocation"
ACPICA commit
eade8f78f2aa21e8eabc3380a5728db47273bcf1
Revert commit
ae90fbf562d7 (ACPICA: Parser: Fix for SuperName method
invocation).
Support for method invocations as part of super_name will be
removed from the ACPI specification, since no AML interpreter
supports it.
Fixes:
ae90fbf562d7 (ACPICA: Parser: Fix for SuperName method invocation)
Link: https://github.com/acpica/acpica/commit/eade8f78
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Alex Deucher [Tue, 8 Mar 2016 16:31:00 +0000 (11:31 -0500)]
Revert "drm/radeon/pm: adjust display configuration after powerstate"
This reverts commit
39d4275058baf53e89203407bf3841ff2c74fa32.
This caused a regression on some older hardware.
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=113891
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Linus Torvalds [Tue, 8 Mar 2016 17:41:20 +0000 (09:41 -0800)]
Merge tag 'sound-4.5' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It's always an ambivalent feeling to send a large pull request at the
late stage like this, especially when most of patches came from me.
Anyway, this is a collection of lots of small fixes that slipped from
the previous pull request.
All fixes are about ASoC, and the majority of changes are corrections
of the wrong access types in ALSA ctl enum items. They are mostly
harmless on 32bit architectures, but actually buggy on 64bit. So we
addressed all these now in a shot. The rest are various small ASoC
driver fixes.
Among them, only two changes have been done to ASoC core, and both of
them are trivial. The rest are all device-specific. So overall, they
should be safe to apply"
* tag 'sound-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ASoC: wm_adsp: Fix enum ctl accesses in a wrong type
ASoC: wm9081: Fix enum ctl accesses in a wrong type
ASoC: wm8996: Fix enum ctl accesses in a wrong type
ASoC: wm8994: Fix enum ctl accesses in a wrong type
ASoC: wm8985: Fix enum ctl accesses in a wrong type
ASoC: wm8983: Fix enum ctl accesses in a wrong type
ASoC: wm8958: Fix enum ctl accesses in a wrong type
ASoC: wm8904: Fix enum ctl accesses in a wrong type
ASoC: wm8753: Fix enum ctl accesses in a wrong type
ASoC: wl1273: Fix enum ctl accesses in a wrong type
ASoC: tlv320dac33: Fix enum ctl accesses in a wrong type
ASoC: max98095: Fix enum ctl accesses in a wrong type
ASoC: max98088: Fix enum ctl accesses in a wrong type
ASoC: ab8500: Fix enum ctl accesses in a wrong type
ASoC: da732x: Fix enum ctl accesses in a wrong type
ASoC: cs42l51: Fix enum ctl accesses in a wrong type
ASoC: intel: mfld: Fix enum ctl accesses in a wrong type
ASoC: omap: rx51: Fix enum ctl accesses in a wrong type
ASoC: omap: n810: Fix enum ctl accesses in a wrong type
ASoC: pxa: tosa: Fix enum ctl accesses in a wrong type
...
Linus Torvalds [Tue, 8 Mar 2016 17:29:00 +0000 (09:29 -0800)]
Merge tag 'edac_fix_for_4.5' of git://git./linux/kernel/git/bp/bp
Pull EDAC fix from Borislav Petkov:
"Last minute fix for sb_edac which fixes DIMM detection on certain Xeon
Phi configurations:
A single fix to the Xeon Phi section of sb_edac. The issue was
introduced during this merge window"
* tag 'edac_fix_for_4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, sb_edac: Fix logic when computing DIMM sizes on Xeon Phi
Alex Deucher [Fri, 4 Mar 2016 00:34:28 +0000 (19:34 -0500)]
drm/amdgpu/dp: add back special handling for NUTMEG
When I fixed the dp rate selection in:
3b73b168cffd9c392584d3f665021fa2190f8612
drm/amdgpu: fix dp link rate selection (v2)
I accidently dropped the special handling for NUTMEG
DP bridge chips. They require a fixed link rate.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Fri, 4 Mar 2016 00:26:24 +0000 (19:26 -0500)]
drm/radeon/dp: add back special handling for NUTMEG
When I fixed the dp rate selection in:
092c96a8ab9d1bd60ada2ed385cc364ce084180e
drm/radeon: fix dp link rate selection (v2)
I accidently dropped the special handling for NUTMEG
DP bridge chips. They require a fixed link rate.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Ken Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
David Hildenbrand [Tue, 8 Mar 2016 11:24:30 +0000 (12:24 +0100)]
KVM: s390: correct fprs on SIGP (STOP AND) STORE STATUS
With MACHINE_HAS_VX, we convert the floating point registers from the
vector registeres when storing the status. For other VCPUs, these are
stored to vcpu->run->s.regs.vrs, but we are using current->thread.fpu.vxrs,
which resolves to the currently loaded VCPU.
So kvm_s390_store_status_unloaded() currently writes the wrong floating
point registers (converted from the vector registers) when called from
another VCPU on a z13.
This is only the case for old user space not handling SIGP STORE STATUS and
SIGP STOP AND STORE STATUS, but relying on the kernel implementation. All
other calls come from the loaded VCPU via kvm_s390_store_status().
Fixes:
9abc2a08a7d6 (KVM: s390: fix memory overwrites when vx is disabled)
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 8 Mar 2016 11:46:50 +0000 (12:46 +0100)]
Merge branch 'kvm-ppc-fixes' of git://git./linux/kernel/git/paulus/powerpc into HEAD
Radim Krčmář [Fri, 4 Mar 2016 14:08:42 +0000 (15:08 +0100)]
KVM: VMX: disable PEBS before a guest entry
Linux guests on Haswell (and also SandyBridge and Broadwell, at least)
would crash if you decided to run a host command that uses PEBS, like
perf record -e 'cpu/mem-stores/pp' -a
This happens because KVM is using VMX MSR switching to disable PEBS, but
SDM [2015-12] 18.4.4.4 Re-configuring PEBS Facilities explains why it
isn't safe:
When software needs to reconfigure PEBS facilities, it should allow a
quiescent period between stopping the prior event counting and setting
up a new PEBS event. The quiescent period is to allow any latent
residual PEBS records to complete its capture at their previously
specified buffer address (provided by IA32_DS_AREA).
There might not be a quiescent period after the MSR switch, so a CPU
ends up using host's MSR_IA32_DS_AREA to access an area in guest's
memory. (Or MSR switching is just buggy on some models.)
The guest can learn something about the host this way:
If the guest doesn't map address pointed by MSR_IA32_DS_AREA, it results
in #PF where we leak host's MSR_IA32_DS_AREA through CR2.
After that, a malicious guest can map and configure memory where
MSR_IA32_DS_AREA is pointing and can therefore get an output from
host's tracing.
This is not a critical leak as the host must initiate with PEBS tracing
and I have not been able to get a record from more than one instruction
before vmentry in vmx_vcpu_run() (that place has most registers already
overwritten with guest's).
We could disable PEBS just few instructions before vmentry, but
disabling it earlier shouldn't affect host tracing too much.
We also don't need to switch MSR_IA32_PEBS_ENABLE on VMENTRY, but that
optimization isn't worth its code, IMO.
(If you are implementing PEBS for guests, be sure to handle the case
where both host and guest enable PEBS, because this patch doesn't.)
Fixes:
26a4f3c08de4 ("perf/x86: disable PEBS on a guest entry.")
Cc: <stable@vger.kernel.org>
Reported-by: Jiří Olša <jolsa@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Christian Borntraeger [Mon, 29 Feb 2016 14:59:18 +0000 (15:59 +0100)]
s390/cpumf: Fix lpp detection
we have to check bit 40 of the facility list before issuing LPP
and not bit 48. Otherwise a guest running on a system with
"The decimal-floating-point zoned-conversion facility" and without
the "The set-program-parameters facility" might crash on an lpp
instruction.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes:
e22cf8ca6f75 ("s390/cpumf: rework program parameter setting to detect guest samples")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Al Viro [Tue, 8 Mar 2016 04:07:10 +0000 (23:07 -0500)]
jffs2: reduce the breakage on recovery from halfway failed rename()
d_instantiate(new_dentry, old_inode) is absolutely wrong thing to
do - it will oops if new_dentry used to be positive, for starters.
What we need is d_invalidate() the target and be done with that.
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Tue, 8 Mar 2016 03:17:07 +0000 (22:17 -0500)]
ncpfs: fix a braino in OOM handling in ncp_fill_cache()
Failing to allocate an inode for child means that cache for *parent* is
incompletely populated. So it's parent directory inode ('dir') that
needs NCPI_DIR_CACHE flag removed, *not* the child inode ('inode', which
is what we'd failed to allocate in the first place).
Fucked-up-in: commit
5e993e25 ("ncpfs: get rid of d_validate() nonsense")
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org # v3.19
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Paul Mackerras [Sat, 5 Mar 2016 08:34:39 +0000 (19:34 +1100)]
KVM: PPC: Book3S HV: Sanitize special-purpose register values on guest exit
Thomas Huth discovered that a guest could cause a hard hang of a
host CPU by setting the Instruction Authority Mask Register (IAMR)
to a suitable value. It turns out that this is because when the
code was added to context-switch the new special-purpose registers
(SPRs) that were added in POWER8, we forgot to add code to ensure
that they were restored to a sane value on guest exit.
This adds code to set those registers where a bad value could
compromise the execution of the host kernel to a suitable neutral
value on guest exit.
Cc: stable@vger.kernel.org # v3.14+
Fixes:
b005255e12a3
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Jyri Sarha [Sat, 16 Jan 2016 20:17:54 +0000 (22:17 +0200)]
drm/i2c: tda998x: Choose between atomic or non atomic dpms helper
Choose between atomic or non atomic connector dpms helper. If tda998x
is connected to a drm driver that does not support atomic modeset
calling drm_atomic_helper_connector_dpms() causes a crash when the
connectors atomic state is not initialized. The patch implements a
driver specific connector dpms helper that calls
drm_atomic_helper_connector_dpms() if driver supports DRIVER_ATOMIC
and otherwise it calls the legacy drm_helper_connector_dpms().
Fixes commit
9736e988d328 ("drm/i2c: tda998x: Add support for atomic
modesetting").
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Thierry Reding [Mon, 7 Mar 2016 17:06:01 +0000 (18:06 +0100)]
drm/vmwgfx: Add back ->detect() and ->fill_modes()
This partially reverts commit
d56f57ac969c ("drm/gma500: Move to private
save/restore hooks") which removed these lines by mistake.
Reported-by: Sebastian Herbszt <herbszt@gmx.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thomas Hellstrom <thellstrom@vmware.com>
Tested-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Mon, 7 Mar 2016 23:41:10 +0000 (15:41 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix ordering of WEXT netlink messages so we don't see a newlink
after a dellink, from Johannes Berg.
2) Out of bounds access in minstrel_ht_set_best_prob_rage, from
Konstantin Khlebnikov.
3) Paging buffer memory leak in iwlwifi, from Matti Gottlieb.
4) Wrong units used to set initial TCP rto from cached metrics, also
from Konstantin Khlebnikov.
5) Fix stale IP options data in the SKB control block from leaking
through layers of encapsulation, from Bernie Harris.
6) Zero padding len miscalculated in bnxt_en, from Michael Chan.
7) Only CHECKSUM_PARTIAL packets should be passed down through GSO, fix
from Hannes Frederic Sowa.
8) Fix suspend/resume with JME networking devices, from Diego Violat
and Guo-Fu Tseng.
9) Checksums not validated properly in bridge multicast support due to
the placement of the SKB header pointers at the time of the check,
fix from Álvaro Fernández Rojas.
10) Fix hang/tiemout with r8169 if a stats fetch is done while the
device is runtime suspended. From Chun-Hao Lin.
11) The forwarding database netlink dump facilities don't track the
state of the dump properly, resulting in skipped/missed entries.
From Minoura Makoto.
12) Fix regression from a recent 3c59x bug fix, from Neil Horman.
13) Fix list corruption in bna driver, from Ivan Vecera.
14) Big endian machines crash on vlan add in bnx2x, fix from Michal
Schmidt.
15) Ethtool RSS configuration not propagated properly in mlx5 driver,
from Tariq Toukan.
16) Fix regression in PHY probing in stmmac driver, from Gabriel
Fernandez.
17) Fix SKB tailroom calculation in igmp/mld code, from Benjamin
Poirier.
18) A past change to skip empty routing headers in ipv6 extention header
parsing accidently caused fragment headers to not be matched any
longer. Fix from Florian Westphal.
19) eTSEC-106 erratum needs to be applied to more gianfar chips, from
Atsushi Nemoto.
20) Fix netdev reference after free via workqueues in usb networking
drivers, from Oliver Neukum and Bjørn Mork.
21) mdio->irq is now an array rather than a pointer to dynamic memory,
but several drivers were still trying to free it :-/ Fixes from
Colin Ian King.
22) act_ipt iptables action forgets to set the family field, thus LOG
netfilter targets don't work with it. Fix from Phil Sutter.
23) SKB leak in ibmveth when skb_linearize() fails, from Thomas Falcon.
24) pskb_may_pull() cannot be called with interrupts disabled, fix code
that tries to do this in vmxnet3 driver, from Neil Horman.
25) be2net driver leaks iomap'd memory on removal, fix from Douglas
Miller.
26) Forgotton RTNL mutex unlock in ppp_create_interface() error paths,
from Guillaume Nault.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (97 commits)
ppp: release rtnl mutex when interface creation fails
cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind
tcp: fix tcpi_segs_in after connection establishment
net: hns: fix the bug about loopback
jme: Fix device PM wakeup API usage
jme: Do not enable NIC WoL functions on S0
udp6: fix UDP/IPv6 encap resubmit path
be2net: Don't leak iomapped memory on removal.
vmxnet3: avoid calling pskb_may_pull with interrupts disabled
net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEM
ibmveth: check return of skb_linearize in ibmveth_start_xmit
cdc_ncm: toggle altsetting to force reset before setup
usbnet: cleanup after bind() in probe()
mlxsw: pci: Correctly determine if descriptor queue is full
mlxsw: spectrum: Always decrement bridge's ref count
tipc: fix nullptr crash during subscription cancel
net: eth: altera: do not free array priv->mdio->irq
net/ethoc: do not free array priv->mdio->irq
net: sched: fix act_ipt for LOG target
asix: do not free array priv->mdio->irq
...
Linus Torvalds [Mon, 7 Mar 2016 23:23:25 +0000 (15:23 -0800)]
Merge branch 'overlayfs-linus' of git://git./linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Overlayfs bug fixes. All marked as -stable material"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: copy new uid/gid into overlayfs runtime inode
ovl: ignore lower entries when checking purity of non-directory entries
ovl: fix getcwd() failure after unsuccessful rmdir
ovl: fix working on distributed fs as lower layer
Linus Torvalds [Mon, 7 Mar 2016 21:15:09 +0000 (13:15 -0800)]
Revert "drm/radeon: call hpd_irq_event on resume"
This reverts commit
dbb17a21c131eca94eb31136eee9a7fe5aff00d9.
It turns out that commit can cause problems for systems with multiple
GPUs, and causes X to hang on at least a HP Pavilion dv7 with hybrid
graphics.
This got noticed originally in 4.4.4, where this patch had already
gotten back-ported, but 4.5-rc7 was verified to have the same problem.
Alexander Deucher says:
"It looks like you have a muxed system so I suspect what's happening is
that one of the display is being reported as connected for both the
IGP and the dGPU and then the desktop environment gets confused or
there some sort problem in the detect functions since the mux is not
switched to the dGPU. I don't see an easy fix unless Dave has any
ideas. I'd say just revert for now"
Reported-by: Jörg-Volker Peetz <jvpeetz@web.de>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: stable@kernel.org # wherever dbb17a21c131 got back-ported
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guillaume Nault [Mon, 7 Mar 2016 18:36:44 +0000 (19:36 +0100)]
ppp: release rtnl mutex when interface creation fails
Add missing rtnl_unlock() in the error path of ppp_create_interface().
Fixes:
58a89ecaca53 ("ppp: fix lockdep splat in ppp_dev_uninit()")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Mon, 7 Mar 2016 20:15:36 +0000 (21:15 +0100)]
cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind
usbnet_link_change will call schedule_work and should be
avoided if bind is failing. Otherwise we will end up with
scheduled work referring to a netdev which has gone away.
Instead of making the call conditional, we can just defer
it to usbnet_probe, using the driver_info flag made for
this purpose.
Fixes:
8a34b0ae8778 ("usbnet: cdc_ncm: apply usbnet_link_change")
Reported-by: Andrey Konovalov <andreyknvl@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 6 Mar 2016 17:29:21 +0000 (09:29 -0800)]
tcp: fix tcpi_segs_in after connection establishment
If final packet (ACK) of 3WHS is lost, it appears we do not properly
account the following incoming segment into tcpi_segs_in
While we are at it, starts segs_in with one, to count the SYN packet.
We do not yet count number of SYN we received for a request sock, we
might add this someday.
packetdrill script showing proper behavior after fix :
// Tests tcpi_segs_in when 3rd packet (ACK) of 3WHS is lost
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
+0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
+.020 < P. 1:1001(1000) ack 1 win 32792
+0 accept(3, ..., ...) = 4
+.000 %{ assert tcpi_segs_in == 2, 'tcpi_segs_in=%d' % tcpi_segs_in }%
Fixes:
2efd055c53c06 ("tcp: add tcpi_segs_in and tcpi_segs_out to tcp_info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
yankejian [Sat, 5 Mar 2016 06:10:42 +0000 (14:10 +0800)]
net: hns: fix the bug about loopback
It will always be passed if the soc is tested the loopback cases. This
patch will fix this bug.
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guo-Fu Tseng [Sat, 5 Mar 2016 00:11:56 +0000 (08:11 +0800)]
jme: Fix device PM wakeup API usage
According to Documentation/power/devices.txt
The driver should not use device_set_wakeup_enable() which is the policy
for user to decide.
Using device_init_wakeup() to initialize dev->power.should_wakeup and
dev->power.can_wakeup on driver initialization.
And use device_may_wakeup() on suspend to decide if WoL function should
be enabled on NIC.
Reported-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guo-Fu Tseng [Sat, 5 Mar 2016 00:11:55 +0000 (08:11 +0800)]
jme: Do not enable NIC WoL functions on S0
Otherwise it might be back on resume right after going to suspend in
some hardware.
Reported-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Krzysztof =?utf-8?Q?Ha=C5=82asa?= [Tue, 1 Mar 2016 06:07:18 +0000 (07:07 +0100)]
PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()
pci_create_root_bus() passes a "parent" pointer to
pci_bus_assign_domain_nr(). When CONFIG_PCI_DOMAINS_GENERIC is defined,
pci_bus_assign_domain_nr() dereferences that pointer. Many callers of
pci_create_root_bus() supply a NULL "parent" pointer, which leads to a NULL
pointer dereference error.
7c674700098c ("PCI: Move domain assignment from arm64 to generic code")
moved the "parent" dereference from arm64 to generic code. Only arm64 used
that code (because only arm64 defined CONFIG_PCI_DOMAINS_GENERIC), and it
always supplied a valid "parent" pointer. Other arches supplied NULL
"parent" pointers but didn't defined CONFIG_PCI_DOMAINS_GENERIC, so they
used a no-op version of pci_bus_assign_domain_nr().
8c7d14746abc ("ARM/PCI: Move to generic PCI domains") defined
CONFIG_PCI_DOMAINS_GENERIC on ARM, and many ARM platforms use
pci_common_init(), which supplies a NULL "parent" pointer.
These platforms (cns3xxx, dove, footbridge, iop13xx, etc.) crash
with a NULL pointer dereference like this while probing PCI:
Unable to handle kernel NULL pointer dereference at virtual address
000000a4
PC is at pci_bus_assign_domain_nr+0x10/0x84
LR is at pci_create_root_bus+0x48/0x2e4
Kernel panic - not syncing: Attempted to kill init!
[bhelgaas: changelog, add "Reported:" and "Fixes:" tags]
Reported: http://forum.doozan.com/read.php?2,17868,22070,quote=1
Fixes:
8c7d14746abc ("ARM/PCI: Move to generic PCI domains")
Fixes:
7c674700098c ("PCI: Move domain assignment from arm64 to generic code")
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
CC: stable@vger.kernel.org # v4.0+
Bill Sommerfeld [Fri, 4 Mar 2016 22:47:21 +0000 (14:47 -0800)]
udp6: fix UDP/IPv6 encap resubmit path
IPv4 interprets a negative return value from a protocol handler as a
request to redispatch to a new protocol. In contrast, IPv6 interprets a
negative value as an error, and interprets a positive value as a request
for redispatch.
UDP for IPv6 was unaware of this difference. Change __udp6_lib_rcv() to
return a positive value for redispatch. Note that the socket's
encap_rcv hook still needs to return a negative value to request
dispatch, and in the case of IPv6 packets, adjust IP6CB(skb)->nhoff to
identify the byte containing the next protocol.
Signed-off-by: Bill Sommerfeld <wsommerfeld@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Douglas Miller [Fri, 4 Mar 2016 21:36:56 +0000 (15:36 -0600)]
be2net: Don't leak iomapped memory on removal.
The adapter->pcicfg resource is either mapped via pci_iomap() or
derived from adapter->db. During be_remove() this resource was ignored
and so could remain mapped after remove.
Add a flag to track whether adapter->pcicfg was mapped or not, then
use that flag in be_unmap_pci_bars() to unmap if required.
Fixes:
25848c901 ("use PCI MMIO read instead of config read for errors")
Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Fri, 4 Mar 2016 18:40:48 +0000 (13:40 -0500)]
vmxnet3: avoid calling pskb_may_pull with interrupts disabled
vmxnet3 has a function vmxnet3_parse_and_copy_hdr which, among other operations,
uses pskb_may_pull to linearize the header portion of an skb. That operation
eventually uses local_bh_disable/enable to ensure that it doesn't race with the
drivers bottom half handler. Unfortunately, vmxnet3 preforms this
parse_and_copy operation with a spinlock held and interrupts disabled. This
causes us to run afoul of the WARN_ON_ONCE(irqs_disabled()) warning in
local_bh_enable, resulting in this:
WARNING: at kernel/softirq.c:159 local_bh_enable+0x59/0x90() (Not tainted)
Hardware name: VMware Virtual Platform
Modules linked in: ipv6 ppdev parport_pc parport microcode e1000 vmware_balloon
vmxnet3 i2c_piix4 sg ext4 jbd2 mbcache sd_mod crc_t10dif sr_mod cdrom mptspi
mptscsih mptbase scsi_transport_spi pata_acpi ata_generic ata_piix vmwgfx ttm
drm_kms_helper drm i2c_core dm_mirror dm_region_hash dm_log dm_mod [last
unloaded: mperf]
Pid: 6229, comm: sshd Not tainted 2.6.32-616.el6.i686 #1
Call Trace:
[<
c04624d9>] ? warn_slowpath_common+0x89/0xe0
[<
c0469e99>] ? local_bh_enable+0x59/0x90
[<
c046254b>] ? warn_slowpath_null+0x1b/0x20
[<
c0469e99>] ? local_bh_enable+0x59/0x90
[<
c07bb936>] ? skb_copy_bits+0x126/0x210
[<
f8d1d9fe>] ? ext4_ext_find_extent+0x24e/0x2d0 [ext4]
[<
c07bc49e>] ? __pskb_pull_tail+0x6e/0x2b0
[<
f95a6164>] ? vmxnet3_xmit_frame+0xba4/0xef0 [vmxnet3]
[<
c05d15a6>] ? selinux_ip_postroute+0x56/0x320
[<
c0615988>] ? cfq_add_rq_rb+0x98/0x110
[<
c0852df8>] ? packet_rcv+0x48/0x350
[<
c07c5839>] ? dev_queue_xmit_nit+0xc9/0x140
...
Fix it by splitting vmxnet3_parse_and_copy_hdr into two functions:
vmxnet3_parse_hdr, which sets up the internal/on stack ctx datastructure, and
pulls the skb (both of which can be done without holding the spinlock with irqs
disabled
and
vmxnet3_copy_header, which just copies the skb to the tx ring under the lock
safely.
tested and shown to correct the described problem. Applies cleanly to the head
of the net tree
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Shrikrishna Khare <skhare@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: "David S. Miller" <davem@davemloft.net>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 7 Mar 2016 19:58:11 +0000 (14:58 -0500)]
Merge tag 'wireless-drivers-for-davem-2016-03-04' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.5
iwlwifi
* free firmware paging memory when the module is unloaded or device removed
* fix pending frames counter to fix an issue when removing stations
ssb
* fix a build problem related to ssb_fill_sprom_with_fallback()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Krzysztof Kozlowski [Fri, 4 Mar 2016 01:04:52 +0000 (10:04 +0900)]
net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEM
The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Thu, 3 Mar 2016 21:22:36 +0000 (15:22 -0600)]
ibmveth: check return of skb_linearize in ibmveth_start_xmit
If skb_linearize fails, the driver should drop the packet
instead of trying to copy it into the bounce buffer.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Thu, 3 Mar 2016 21:20:53 +0000 (22:20 +0100)]
cdc_ncm: toggle altsetting to force reset before setup
Some devices will silently fail setup unless they are reset first.
This is necessary even if the data interface is already in
altsetting 0, which it will be when the device is probed for the
first time. Briefly toggling the altsetting forces a function
reset regardless of the initial state.
This fixes a setup problem observed on a number of Huawei devices,
appearing to operate in NTB-32 mode even if we explicitly set them
to NTB-16 mode.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hubert Chrzaniuk [Mon, 7 Mar 2016 14:30:45 +0000 (15:30 +0100)]
EDAC, sb_edac: Fix logic when computing DIMM sizes on Xeon Phi
Correct a typo introduced by
d0cdf9003140 ("EDAC, sb_edac: Add Knights Landing (Xeon Phi gen 2) support")
As a result under some configurations DIMMs were not correctly
recognized. Problem affects only Xeon Phi architecture.
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1457361045-26221-1-git-send-email-hubert.chrzaniuk@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Takashi Iwai [Wed, 24 Feb 2016 14:35:22 +0000 (15:35 +0100)]
drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW
The recent commit [
0bdf5a05647a: drm/i915: Add reverse mapping between
port and intel_encoder] introduced a reverse mapping to retrieve
intel_dig_port object from the port number. The code assumed that the
port vs intel_dig_port are 1:1 mapping. But in reality, this was a
too naive assumption.
As Martin reported about the missing HDMI audio on his SNB machine,
pre-HSW chips may have multiple intel_dig_port objects corresponding
to the same port. Since we assign the mapping statically at the init
time and the multiple objects override the map, it may not match with
the actually enabled output.
This patch tries to address the regression above. The reverse mapping
is provided basically only for the audio callbacks, so now we set /
clear the mapping dynamically at enabling and disabling HDMI/DP audio,
so that we can always track the latest and correct object
corresponding to the given port.
Fixes:
0bdf5a05647a ('drm/i915: Add reverse mapping between port and intel_encoder')
Reported-and-tested-by: Martin Kepplinger <martink@posteo.de>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1456324522-21591-1-git-send-email-tiwai@suse.de
(cherry picked from commit
9dfbffcf4ac0707097af9e6c1372192b9d03a357)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Oliver Neukum [Mon, 7 Mar 2016 10:31:10 +0000 (11:31 +0100)]
usbnet: cleanup after bind() in probe()
In case bind() works, but a later error forces bailing
in probe() in error cases work and a timer may be scheduled.
They must be killed. This fixes an error case related to
the double free reported in
http://www.spinics.net/lists/netdev/msg367669.html
and needs to go on top of Linus' fix to cdc-ncm.
Signed-off-by: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 7 Mar 2016 16:39:16 +0000 (11:39 -0500)]
Merge branch 'mlxsw-fixes'
Jiri Pirko says:
====================
mlxsw: couple of fixes
Couple of fixes from Ido.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 7 Mar 2016 14:15:30 +0000 (15:15 +0100)]
mlxsw: pci: Correctly determine if descriptor queue is full
The descriptor queues for sending (SDQs) and receiving (RDQs) packets
are managed by two counters - producer and consumer - which are both
16-bit in size. A queue is considered full when the difference between
the two equals the queue's maximum number of descriptors.
However, if the producer counter overflows, then it's possible for the
full queue check to fail, as it doesn't take the overflow into account.
In such a case, descriptors already passed to the device - but for which
a completion has yet to be posted - will be overwritten, thereby causing
undefined behavior. The above can be achieved under heavy load (~30
netperf instances).
Fix that by casting the subtraction result to u16, preventing it from
being treated as a signed integer.
Fixes:
eda6500a987a ("mlxsw: Add PCI bus implementation")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 7 Mar 2016 14:15:29 +0000 (15:15 +0100)]
mlxsw: spectrum: Always decrement bridge's ref count
Since we only support one VLAN filtering bridge we need to associate a
reference count with it, so that when the last port netdev leaves it, we
would know that a different bridge can be offloaded to hardware.
When a LAG device is memeber in a bridge and port netdevs are leaving
the LAG, we should always decrement the bridge's reference count, as it's
incremented for any port in the LAG.
Fixes:
4dc236c31733 ("mlxsw: spectrum: Handle port leaving LAG while bridged")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Mon, 7 Mar 2016 10:06:46 +0000 (11:06 +0100)]
Merge tag 'asoc-fix-v4.5-rc6' of git://git./linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.5
This is far too big a set of fixes for this late in the release cycle
but the overwhelming bulk is essentially the same simple fix from
Takashi for a cut'n'pasted 64 bit cleanliness issue in the userspace
interface where drivers were accessing things using the wrong element in
a union which worked OK on 32 bit platforms as the correct element
happened to be aligned the same way but with 64 bit platforms ABIs are
different and the two members of the union are laid out in different
places. They aren't all tagged to stable since some of these chips have
vanishingly little chance of being used in 64 bit systems.
The other changes are:
- A fix for Qualcomm devices to work on big endian systems. The
original change is actually correct but triggered a bug in regmap
which is too invasive to fix for this cycle and can be worked around
by just letting regmap pick the default.
- A fix for the Samsung I2S driver locking which wasn't using IRQ safe
spinlocks when it needed to.
- A fix for the new Intel Sky Lake driver forgetting that C pointer
arithmetic takes the type of the pointer into consideration.
- A revert of a change to the FSL SSI driver that broke some systems.
- A fix for the cleanup path of the wm9713 driver.
- A fix for some incorrect register definitions in the ADAU17x1 driver
that caused misclocking in some configurations.
- A fix for the tracepoints for jack detection to avoid using an
internal field of the core jack structure which is no longer present
in all configurations.
- A fix for another of the new Intel drivers which tried to write to a
string literal.
Mugunthan V N [Mon, 7 Mar 2016 08:41:22 +0000 (01:41 -0700)]
ARM: dts: dra7: do not gate cpsw clock due to errata i877
Errata id: i877
Description:
------------
The RGMII 1000 Mbps Transmit timing is based on the output clock
(rgmiin_txc) being driven relative to the rising edge of an internal
clock and the output control/data (rgmiin_txctl/txd) being driven relative
to the falling edge of an internal clock source. If the internal clock
source is allowed to be static low (i.e., disabled) for an extended period
of time then when the clock is actually enabled the timing delta between
the rising edge and falling edge can change over the lifetime of the
device. This can result in the device switching characteristics degrading
over time, and eventually failing to meet the Data Manual Delay Time/Skew
specs.
To maintain RGMII 1000 Mbps IO Timings, SW should minimize the
duration that the Ethernet internal clock source is disabled. Note that
the device reset state for the Ethernet clock is "disabled".
Other RGMII modes (10 Mbps, 100Mbps) are not affected
Workaround:
-----------
If the SoC Ethernet interface(s) are used in RGMII mode at 1000 Mbps,
SW should minimize the time the Ethernet internal clock source is disabled
to a maximum of 200 hours in a device life cycle. This is done by enabling
the clock as early as possible in IPL (QNX) or SPL/u-boot (Linux/Android)
by setting the register CM_GMAC_CLKSTCTRL[1:0]CLKTRCTRL = 0x2:SW_WKUP.
So, do not allow to gate the cpsw clocks using ti,no-idle property in
cpsw node assuming 1000 Mbps is being used all the time. If someone does
not need 1000 Mbps and wants to gate clocks to cpsw, this property needs
to be deleted in their respective board files.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Lokesh Vutla [Mon, 7 Mar 2016 08:41:21 +0000 (01:41 -0700)]
ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
Introduce a dt property, ti,no-idle, that prevents an IP to idle at any
point. This is to handle Errata i877, which tells that GMAC clocks
cannot be disabled.
Acked-by: Roger Quadros <rogerq@ti.com>
Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Parthasarathy Bhuvaragan [Thu, 3 Mar 2016 16:54:54 +0000 (17:54 +0100)]
tipc: fix nullptr crash during subscription cancel
commit
4d5cfcba2f6e ('tipc: fix connection abort during subscription
cancel'), removes the check for a valid subscription before calling
tipc_nametbl_subscribe().
This will lead to a nullptr exception when we process a
subscription cancel request. For a cancel request, a null
subscription is passed to tipc_nametbl_subscribe() resulting
in exception.
In this commit, we call tipc_nametbl_subscribe() only for
a valid subscription.
Fixes:
4d5cfcba2f6e ('tipc: fix connection abort during subscription cancel')
Reported-by: Anders Widell <anders.widell@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Thu, 3 Mar 2016 13:47:18 +0000 (13:47 +0000)]
net: eth: altera: do not free array priv->mdio->irq
priv->mdio->irq used to be allocated and required freeing, but it
is now a fixed sized array and should no longer be free'd.
Issue detected using static analysis with CoverityScan
Fixes:
e7f4dc3536a400 ("mdio: Move allocation of interrupts into core")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Thu, 3 Mar 2016 13:43:34 +0000 (13:43 +0000)]
net/ethoc: do not free array priv->mdio->irq
priv->mdio->irq used to be allocated and required freeing, but it
is now a fixed sized array and should no longer be free'd.
Issue detected using static analysis with CoverityScan
Fixes:
e7f4dc3536a400 ("mdio: Move allocation of interrupts into core")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Sutter [Thu, 3 Mar 2016 13:34:14 +0000 (14:34 +0100)]
net: sched: fix act_ipt for LOG target
Before calling the destroy() or target() callbacks, the family parameter
field has to be initialized. Otherwise at least the LOG target will
refuse to work and upon removal oops the kernel.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Thu, 3 Mar 2016 13:27:56 +0000 (13:27 +0000)]
asix: do not free array priv->mdio->irq
Used to be allocated and required freeing, but now
priv->mdio->irq is now a fixed sized array and should no longer be
free'd.
Issue detected using static analysis with CoverityScan
Fixes:
e7f4dc3536a400 ("mdio: Move allocation of interrupts into core")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Atsushi Nemoto [Thu, 3 Mar 2016 00:07:51 +0000 (09:07 +0900)]
gianfar: Enable eTSEC-106 erratum w/a for MPC8548E Rev2
Enable workaround for MPC8548E erratum eTSEC 106,
"Excess delays when transmitting TOE=1 large frames".
(see commit
53fad77375ce "gianfar: Enable eTSEC-20 erratum w/a
for P2020 Rev1")
This erratum was fixed in Rev 3.1.x.
Signed-off-by: Atsushi Nemoto <nemoto@toshiba-tops.co.jp>
Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 6 Mar 2016 22:48:03 +0000 (14:48 -0800)]
Linux 4.5-rc7