OSDN Git Service
Stephen Warren [Fri, 6 Dec 2013 20:34:50 +0000 (13:34 -0700)]
ASoC: tegra: fix uninitialized variables in set_fmt
commit
241bf43321a10815225f477bba96a42285a2da73 upstream.
In tegra*_i2s_set_fmt(), in the (fmt == SND_SOC_DAIFMT_CBM_CFM) case,
"val" is never assigned to, but left uninitialized. The other case does
initialized it. Fix this by initializing val at the start of the
function, and only ever ORing into it.
Update the handling of "mask" so it works the same way for consistency.
Update tegra20_spdif.c to use the same code-style for consistency, even
though it doesn't happen to suffer from the same problem at present.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Fixes:
0f163546a772 ("ASoC: tegra: use regmap more directly")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 13 Dec 2013 12:00:30 +0000 (12:00 +0000)]
staging: comedi: 8255_pci: fix for newer PCI-DIO48H
commit
0283f7a100882684ad32b768f9f1ad81658a0b92 upstream.
At some point, Measurement Computing / ComputerBoards redesigned the
PCI-DIO48H to use a PLX PCI interface chip instead of an AMCC chip.
This meant they had to put their hardware registers in the PCI BAR 2
region instead of PCI BAR 1. Unfortunately, they kept the same PCI
device ID for the new design. This means the driver recognizes the
newer cards, but doesn't work (and is likely to screw up the local
configuration registers of the PLX chip) because it's using the wrong
region.
Since the PCI subvendor and subdevice IDs were both zero on the old
design, but are the same as the vendor and device on the new design, we
can tell the old design and new design apart easily enough. Split the
existing entry for the PCI-DIO48H in `pci_8255_boards[]` into two new
entries, referenced by different entries in the PCI device ID table
`pci_8255_pci_table[]`. Use the same board name for both entries.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Fri, 22 Nov 2013 15:47:26 +0000 (16:47 +0100)]
TTY: pmac_zilog, check existence of ports in pmz_console_init()
commit
dc1dc2f8a5dd863bf2e79f338fc3ae29e99c683a upstream.
When booting a multi-platform m68k kernel on a non-Mac with "console=ttyS0"
on the kernel command line, it crashes with:
Unable to handle kernel NULL pointer dereference at virtual address (null)
Oops:
00000000
PC: [<
0013ad28>] __pmz_startup+0x32/0x2a0
...
Call Trace: [<
002c5d3e>] pmz_console_setup+0x64/0xe4
The normal tty driver doesn't crash, because init_pmz() checks
pmz_ports_count again after calling pmz_probe().
In the serial console initialization path, pmz_console_init() doesn't do
this, causing the driver to crash later.
Add a check for pmz_ports_count to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pingfan liu [Fri, 15 Nov 2013 08:35:00 +0000 (16:35 +0800)]
powerpc: kvm: fix rare but potential deadlock scene
commit
91648ec09c1ef69c4d840ab6dab391bfb452d554 upstream.
Since kvmppc_hv_find_lock_hpte() is called from both virtmode and
realmode, so it can trigger the deadlock.
Suppose the following scene:
Two physical cpuM, cpuN, two VM instances A, B, each VM has a group of
vcpus.
If on cpuM, vcpu_A_1 holds bitlock X (HPTE_V_HVLOCK), then is switched
out, and on cpuN, vcpu_A_2 try to lock X in realmode, then cpuN will be
caught in realmode for a long time.
What makes things even worse if the following happens,
On cpuM, bitlockX is hold, on cpuN, Y is hold.
vcpu_B_2 try to lock Y on cpuM in realmode
vcpu_A_2 try to lock X on cpuN in realmode
Oops! deadlock happens
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yan, Zheng [Thu, 31 Oct 2013 01:10:47 +0000 (09:10 +0800)]
ceph: wake up 'safe' waiters when unregistering request
commit
fc55d2c9448b34218ca58733a6f51fbede09575b upstream.
We also need to wake up 'safe' waiters if error occurs or request
aborted. Otherwise sync(2)/fsync(2) may hang forever.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yan, Zheng [Thu, 26 Sep 2013 06:25:36 +0000 (14:25 +0800)]
ceph: cleanup aborted requests when re-sending requests.
commit
eb1b8af33c2e42a9a57fc0a7588f4a7b255d2e79 upstream.
Aborted requests usually get cleared when the reply is received.
If MDS crashes, no reply will be received. So we need to cleanup
aborted requests when re-sending requests.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Sat, 9 Nov 2013 11:38:09 +0000 (12:38 +0100)]
USB: serial: fix race in generic write
commit
6f6485463aada1ec6a0f3db6a03eb8e393d6bb55 upstream.
Fix race in generic write implementation, which could lead to
temporarily degraded throughput.
The current generic write implementation introduced by commit
27c7acf22047 ("USB: serial: reimplement generic fifo-based writes") has
always had this bug, although it's fairly hard to trigger and the
consequences are not likely to be noticed.
Specifically, a write() on one CPU while the completion handler is
running on another could result in only one of the two write urbs being
utilised to empty the remainder of the write fifo (unless there is a
second write() that doesn't race during that time).
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 20 Dec 2013 15:45:26 +0000 (07:45 -0800)]
Linux 3.10.25
Roger Quadros [Mon, 9 Dec 2013 01:39:02 +0000 (18:39 -0700)]
ARM: OMAP2+: hwmod: Fix SOFTRESET logic
commit
313a76ee11cda6700548afe68499ef174a240688 upstream.
In _ocp_softreset(), after _set_softreset() + write_sysconfig(),
the hwmod's sysc_cache will always contain SOFTRESET bit set
so all further writes to sysconfig using this cache will initiate
a repeated SOFTRESET e.g. enable_sysc(). This is true for OMAP3 like
platforms that have RESET_DONE status in the SYSSTATUS register and
so the the SOFTRESET bit in SYSCONFIG is not automatically cleared.
It is not a problem for OMAP4 like platforms that indicate RESET
completion by clearing the SOFTRESET bit in the SYSCONFIG register.
This repeated SOFTRESET is undesired and was the root cause of
USB host issues on OMAP3 platforms when hwmod was allowed to do the
SOFTRESET for the USB Host module.
To fix this we clear the SOFTRESET bit and update the sysconfig
register + sysc_cache using write_sysconfig().
Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> # Panda, BeagleXM
[paul@pwsan.com: renamed _clr_softreset() to _clear_softreset()]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liu Bo [Tue, 29 Oct 2013 02:45:05 +0000 (10:45 +0800)]
Btrfs: do not run snapshot-aware defragment on error
commit
6f519564d7d978c00351d9ab6abac3deeac31621 upstream.
If something wrong happens in write endio, running snapshot-aware defragment
can end up with undefined results, maybe a crash, so we should avoid it.
In order to share similar code, this also adds a helper to free the struct for
snapshot-aware defrag.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe David Borba Manana [Tue, 15 Oct 2013 17:44:00 +0000 (18:44 +0100)]
Btrfs: fix incorrect inode acl reset
commit
8185554d3eb09d23a805456b6fa98dcbb34aa518 upstream.
When a directory has a default ACL and a subdirectory is created
under that directory, btrfs_init_acl() is called when the
subdirectory's inode is created to initialize the inode's ACL
(inherited from the parent directory) but it was clearing the ACL
from the inode after setting it if posix_acl_create() returned
success, instead of clearing it only if it returned an error.
To reproduce this issue:
$ mkfs.btrfs -f /dev/loop0
$ mount /dev/loop0 /mnt
$ mkdir /mnt/acl
$ setfacl -d --set u::rwx,g::rwx,o::- /mnt/acl
$ getfacl /mnt/acl
user::rwx
group::rwx
other::r-x
default:user::rwx
default:group::rwx
default:other::---
$ mkdir /mnt/acl/dir1
$ getfacl /mnt/acl/dir1
user::rwx
group::rwx
other::---
After unmounting and mounting again the filesystem, fgetacl returned the
expected ACL:
$ umount /mnt/acl
$ mount /dev/loop0 /mnt
$ getfacl /mnt/acl/dir1
user::rwx
group::rwx
other::---
default:user::rwx
default:group::rwx
default:other::---
Meaning that the underlying xattr was persisted.
Reported-by: Giuseppe Fierro <giuseppe@fierro.org>
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Mon, 14 Oct 2013 21:23:08 +0000 (17:23 -0400)]
Btrfs: fix hole check in log_one_extent
commit
ed9e8af88e2551aaa6bf51d8063a2493e2d71597 upstream.
I added an assert to make sure we were looking up aligned offsets for csums and
I tripped it when running xfstests. This is because log_one_extent was checking
if block_start == 0 for a hole instead of EXTENT_MAP_HOLE. This worked out fine
in practice it seems, but it adds a lot of extra work that is uneeded. With
this fix I'm no longer tripping my assert. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liu Bo [Sun, 29 Sep 2013 02:33:16 +0000 (10:33 +0800)]
Btrfs: fix memory leak of chunks' extent map
commit
7d3d1744f8a7d62e4875bd69cc2192a939813880 upstream.
As we're hold a ref on looking up the extent map, we need to drop the ref
before returning to callers.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 18 Dec 2013 20:40:45 +0000 (12:40 -0800)]
Revert "net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLAST"
It turns out that commit:
d3f7d56a7a4671d395e8af87071068a195257bf6 was
applied to the tree twice, which didn't hurt anything, but it's good to
fix this up.
Reported-by: Veaceslav Falico <veaceslav@falico.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Shawn Landden <shawnlandden@gmail.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Dichtel [Fri, 13 Dec 2013 09:06:35 +0000 (10:06 +0100)]
ip6tnl: fix use after free of fb_tnl_dev
The upstream commit
bb8140947a24 ("ip6tnl: allow to use rtnl ops on fb tunnel")
(backported into linux-3.10.y) left a bug which was fixed upstream by commit
1e9f3d6f1c40 ("ip6tnl: fix use after free of fb_tnl_dev").
The problem is a bit different in linux-3.10.y, because there is no x-netns
support (upstream commit
0bd8762824e7 ("ip6tnl: add x-netns support")).
When ip6_tunnel.ko is unloaded, FB device is deleted by rtnl_link_unregister()
and then we try to delete it again in ip6_tnl_destroy_tunnels().
This patch removes the second deletion.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Adamson [Fri, 15 Nov 2013 21:36:16 +0000 (16:36 -0500)]
NFSv4 wait on recovery for async session errors
commit
4a82fd7c4e78a1b7a224f9ae8bb7e1fd95f670e0 upstream.
When the state manager is processing the NFS4CLNT_DELEGRETURN flag, session
draining is off, but DELEGRETURN can still get a session error.
The async handler calls nfs4_schedule_session_recovery returns -EAGAIN, and
the DELEGRETURN done then restarts the RPC task in the prepare state.
With the state manager still processing the NFS4CLNT_DELEGRETURN flag with
session draining off, these DELEGRETURNs will cycle with errors filling up the
session slots.
This prevents OPEN reclaims (from nfs_delegation_claim_opens) required by the
NFS4CLNT_DELEGRETURN state manager processing from completing, hanging the
state manager in the __rpc_wait_for_completion_task in nfs4_run_open_task
as seen in this kernel thread dump:
kernel: 4.12.32.53-ma D
0000000000000000 0 3393 2 0x00000000
kernel:
ffff88013995fb60 0000000000000046 ffff880138cc5400 ffff88013a9df140
kernel:
ffff8800000265c0 ffffffff8116eef0 ffff88013fc10080 0000000300000001
kernel:
ffff88013a4ad058 ffff88013995ffd8 000000000000fbc8 ffff88013a4ad058
kernel: Call Trace:
kernel: [<
ffffffff8116eef0>] ? cache_alloc_refill+0x1c0/0x240
kernel: [<
ffffffffa0358110>] ? rpc_wait_bit_killable+0x0/0xa0 [sunrpc]
kernel: [<
ffffffffa0358152>] rpc_wait_bit_killable+0x42/0xa0 [sunrpc]
kernel: [<
ffffffff8152914f>] __wait_on_bit+0x5f/0x90
kernel: [<
ffffffffa0358110>] ? rpc_wait_bit_killable+0x0/0xa0 [sunrpc]
kernel: [<
ffffffff815291f8>] out_of_line_wait_on_bit+0x78/0x90
kernel: [<
ffffffff8109b520>] ? wake_bit_function+0x0/0x50
kernel: [<
ffffffffa035810d>] __rpc_wait_for_completion_task+0x2d/0x30 [sunrpc]
kernel: [<
ffffffffa040d44c>] nfs4_run_open_task+0x11c/0x160 [nfs]
kernel: [<
ffffffffa04114e7>] nfs4_open_recover_helper+0x87/0x120 [nfs]
kernel: [<
ffffffffa0411646>] nfs4_open_recover+0xc6/0x150 [nfs]
kernel: [<
ffffffffa040cc6f>] ? nfs4_open_recoverdata_alloc+0x2f/0x60 [nfs]
kernel: [<
ffffffffa0414e1a>] nfs4_open_delegation_recall+0x6a/0xa0 [nfs]
kernel: [<
ffffffffa0424020>] nfs_end_delegation_return+0x120/0x2e0 [nfs]
kernel: [<
ffffffff8109580f>] ? queue_work+0x1f/0x30
kernel: [<
ffffffffa0424347>] nfs_client_return_marked_delegations+0xd7/0x110 [nfs]
kernel: [<
ffffffffa04225d8>] nfs4_run_state_manager+0x548/0x620 [nfs]
kernel: [<
ffffffffa0422090>] ? nfs4_run_state_manager+0x0/0x620 [nfs]
kernel: [<
ffffffff8109b0f6>] kthread+0x96/0xa0
kernel: [<
ffffffff8100c20a>] child_rip+0xa/0x20
kernel: [<
ffffffff8109b060>] ? kthread+0x0/0xa0
kernel: [<
ffffffff8100c200>] ? child_rip+0x0/0x20
The state manager can not therefore process the DELEGRETURN session errors.
Change the async handler to wait for recovery on session errors.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan [Wed, 4 Dec 2013 15:31:52 +0000 (15:31 +0000)]
sc1200_wdt: Fix oops
commit
dace8bbfccfd9e4fcccfffcfbd82881fda3e756f upstream.
If loaded with isapnp = 0 the driver explodes. This is catching
people out now and then. What should happen in the working case is
a complete mystery and the code appears terminally confused, but we
can at least make the error path work properly.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Partially-Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=53991
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 30 Aug 2013 18:08:50 +0000 (11:08 -0700)]
staging: comedi: ssv_dnp: use comedi_dio_update_state()
commit
f6b316bcd8c421acd6fa5a6e18b4c846ecb9d965 upstream.
Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.
Also, fix a bug where the state of the channels is returned in data[0].
The comedi core expects it to be returned in data[1].
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Fri, 30 Aug 2013 18:05:58 +0000 (11:05 -0700)]
staging: comedi: drivers: use comedi_dio_update_state() for simple cases
commit
97f4289ad08cffe55de06d4ac4f89ac540450aee upstream.
[Split from original patch subject: "staging: comedi: drivers: use
comedi_dio_update_state() for simple cases"]
Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state for simple cases where the hardware is updated
when any channel is modified.
Also, fix a bug in the amplc_pc263 and amplc_pci263 drivers where the
current state is not returned in data[1].
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Tue, 20 Aug 2013 10:50:19 +0000 (11:50 +0100)]
staging: comedi: pcmuio: fix possible NULL deref on detach
commit
2fd2bdfccae61efe18f6b92b6a45fbf936d75b48 upstream.
pcmuio_detach() is called by the comedi core even if pcmuio_attach()
returned an error, so `dev->private` might be `NULL`. Check for that
before dereferencing it.
Also, as pointed out by Dan Carpenter, there is no need to check the
pointer passed to `kfree()` is non-NULL, so remove that check.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Segall [Wed, 16 Oct 2013 18:16:32 +0000 (11:16 -0700)]
sched: Avoid throttle_cfs_rq() racing with period_timer stopping
commit
f9f9ffc237dd924f048204e8799da74f9ecf40cf upstream.
throttle_cfs_rq() doesn't check to make sure that period_timer is running,
and while update_curr/assign_cfs_runtime does, a concurrently running
period_timer on another cpu could cancel itself between this cpu's
update_curr and throttle_cfs_rq(). If there are no other cfs_rqs running
in the tg to restart the timer, this causes the cfs_rq to be stranded
forever.
Fix this by calling __start_cfs_bandwidth() in throttle if the timer is
inactive.
(Also add some sched_debug lines for cfs_bandwidth.)
Tested: make a run/sleep task in a cgroup, loop switching the cgroup
between 1ms/100ms quota and unlimited, checking for timer_active=0 and
throttled=1 as a failure. With the throttle_cfs_rq() change commented out
this fails, with the full patch it passes.
Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181632.22647.84174.stgit@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Fri, 4 Oct 2013 14:01:43 +0000 (11:01 -0300)]
cxd2820r_core: fix sparse warnings
commit
0db3fa2741ad8371c21b3a6785416a4afc0cc1d4 upstream.
drivers/media/dvb-frontends/cxd2820r_core.c:34:32: error: cannot size expression
drivers/media/dvb-frontends/cxd2820r_core.c:68:32: error: cannot size expression
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Frederik Himpe <fhimpe@telenet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Mon, 2 Dec 2013 18:59:31 +0000 (19:59 +0100)]
nfs: fix do_div() warning by instead using sector_div()
commit
3873d064b8538686bbbd4b858dc8a07db1f7f43a upstream.
When compiling a 32bit kernel with CONFIG_LBDAF=n the compiler complains like
shown below. Fix this warning by instead using sector_div() which is provided
by the kernel.h header file.
fs/nfs/blocklayout/extents.c: In function ‘normalize’:
include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast [enabled by default]
fs/nfs/blocklayout/extents.c:47:13: note: in expansion of macro ‘do_div’
nfs/blocklayout/extents.c:47:2: warning: right shift count >= width of type [enabled by default]
fs/nfs/blocklayout/extents.c:47:2: warning: passing argument 1 of ‘__div64_32’ from incompatible pointer type [enabled by default]
include/asm-generic/div64.h:35:17: note: expected ‘uint64_t *’ but argument is of type ‘sector_t *’
extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Thornber [Mon, 2 Dec 2013 22:57:42 +0000 (17:57 -0500)]
dm thin: switch to read only mode if a mapping insert fails
commit
fafc7a815e40255d24e80a1cb7365892362fa398 upstream.
Switch the thin pool to read-only mode when dm_thin_insert_block() fails
since there is little reason to expect the cause of the failure to be
resolved without further action by user space.
This issue was noticed with the device-mapper-test-suite using:
dmtest run --suite thin-provisioning -n /exhausting_metadata_space_causes_fail_mode/
The quantity of errors logged in this case must be reduced.
before patch:
device-mapper: thin: dm_thin_insert_block() failed
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: thin: dm_thin_insert_block() failed
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: thin: dm_thin_insert_block() failed
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: thin: dm_thin_insert_block() failed
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: thin: dm_thin_insert_block() failed
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: thin: dm_thin_insert_block() failed
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: thin: dm_thin_insert_block() failed
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: thin: dm_thin_insert_block() failed
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: thin: dm_thin_insert_block() failed
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: thin: dm_thin_insert_block() failed
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: space map metadata: unable to allocate new metadata block
<snip ... these repeat for a long while ... >
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: space map common: dm_tm_shadow_block() failed
device-mapper: thin: 253:4: no free metadata space available.
device-mapper: thin: 253:4: switching pool to read-only mode
after patch:
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: thin: 253:4: dm_thin_insert_block() failed: error = -28
device-mapper: thin: 253:4: switching pool to read-only mode
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Sat, 23 Nov 2013 00:52:06 +0000 (19:52 -0500)]
dm table: fail dm_table_create on dm_round_up overflow
commit
5b2d06576c5410c10d95adfd5c4d8b24de861d87 upstream.
The dm_round_up function may overflow to zero. In this case,
dm_table_create() must fail rather than go on to allocate an empty array
with alloc_targets().
This fixes a possible memory corruption that could be caused by passing
too large a number in "param->target_count".
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Snitzer [Mon, 2 Dec 2013 21:47:01 +0000 (16:47 -0500)]
dm space map metadata: return on failure in sm_metadata_new_block
commit
f62b6b8f498658a9d537c7d380e9966f15e1b2a1 upstream.
Commit
2fc48021f4afdd109b9e52b6eef5db89ca80bac7 ("dm persistent
metadata: add space map threshold callback") introduced a regression
to the metadata block allocation path that resulted in errors being
ignored. This regression was uncovered by running the following
device-mapper-test-suite test:
dmtest run --suite thin-provisioning -n /exhausting_metadata_space_causes_fail_mode/
The ignored error codes in sm_metadata_new_block() could crash the
kernel through use of either the dm-thin or dm-cache targets, e.g.:
device-mapper: thin: 253:4: reached low water mark for metadata device: sending event.
device-mapper: space map metadata: unable to allocate new metadata block
general protection fault: 0000 [#1] SMP
...
Workqueue: dm-thin do_worker [dm_thin_pool]
task:
ffff880035ce2ab0 ti:
ffff88021a054000 task.ti:
ffff88021a054000
RIP: 0010:[<
ffffffffa0331385>] [<
ffffffffa0331385>] metadata_ll_load_ie+0x15/0x30 [dm_persistent_data]
RSP: 0018:
ffff88021a055a68 EFLAGS:
00010202
RAX:
003fc8243d212ba0 RBX:
ffff88021a780070 RCX:
ffff88021a055a78
RDX:
ffff88021a055a78 RSI:
0040402222a92a80 RDI:
ffff88021a780070
RBP:
ffff88021a055a68 R08:
ffff88021a055ba4 R09:
0000000000000010
R10:
0000000000000000 R11:
00000002a02e1000 R12:
ffff88021a055ad4
R13:
0000000000000598 R14:
ffffffffa0338470 R15:
ffff88021a055ba4
FS:
0000000000000000(0000) GS:
ffff88033fca0000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
CR2:
00007f467c0291b8 CR3:
0000000001a0b000 CR4:
00000000000007e0
Stack:
ffff88021a055ab8 ffffffffa0332020 ffff88021a055b30 0000000000000001
ffff88021a055b30 0000000000000000 ffff88021a055b18 0000000000000000
ffff88021a055ba4 ffff88021a055b98 ffff88021a055ae8 ffffffffa033304c
Call Trace:
[<
ffffffffa0332020>] sm_ll_lookup_bitmap+0x40/0xa0 [dm_persistent_data]
[<
ffffffffa033304c>] sm_metadata_count_is_more_than_one+0x8c/0xc0 [dm_persistent_data]
[<
ffffffffa0333825>] dm_tm_shadow_block+0x65/0x110 [dm_persistent_data]
[<
ffffffffa0331b00>] sm_ll_mutate+0x80/0x300 [dm_persistent_data]
[<
ffffffffa0330e60>] ? set_ref_count+0x10/0x10 [dm_persistent_data]
[<
ffffffffa0331dba>] sm_ll_inc+0x1a/0x20 [dm_persistent_data]
[<
ffffffffa0332270>] sm_disk_new_block+0x60/0x80 [dm_persistent_data]
[<
ffffffff81520036>] ? down_write+0x16/0x40
[<
ffffffffa001e5c4>] dm_pool_alloc_data_block+0x54/0x80 [dm_thin_pool]
[<
ffffffffa001b23c>] alloc_data_block+0x9c/0x130 [dm_thin_pool]
[<
ffffffffa001c27e>] provision_block+0x4e/0x180 [dm_thin_pool]
[<
ffffffffa001fe9a>] ? dm_thin_find_block+0x6a/0x110 [dm_thin_pool]
[<
ffffffffa001c57a>] process_bio+0x1ca/0x1f0 [dm_thin_pool]
[<
ffffffff8111e2ed>] ? mempool_free+0x8d/0xa0
[<
ffffffffa001d755>] process_deferred_bios+0xc5/0x230 [dm_thin_pool]
[<
ffffffffa001d911>] do_worker+0x51/0x60 [dm_thin_pool]
[<
ffffffff81067872>] process_one_work+0x182/0x3b0
[<
ffffffff81068c90>] worker_thread+0x120/0x3a0
[<
ffffffff81068b70>] ? manage_workers+0x160/0x160
[<
ffffffff8106eb2e>] kthread+0xce/0xe0
[<
ffffffff8106ea60>] ? kthread_freezable_should_stop+0x70/0x70
[<
ffffffff8152af6c>] ret_from_fork+0x7c/0xb0
[<
ffffffff8106ea60>] ? kthread_freezable_should_stop+0x70/0x70
[<
ffffffff8152af6c>] ret_from_fork+0x7c/0xb0
[<
ffffffff8106ea60>] ? kthread_freezable_should_stop+0x70/0x70
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Fri, 15 Nov 2013 21:12:20 +0000 (16:12 -0500)]
dm delay: fix a possible deadlock due to shared workqueue
commit
718822c1c112dc99e0c72c8968ee1db9d9d910f0 upstream.
The dm-delay target uses a shared workqueue for multiple instances. This
can cause deadlock if two or more dm-delay targets are stacked on the top
of each other.
This patch changes dm-delay to use a per-instance workqueue.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Thornber [Fri, 13 Dec 2013 14:55:55 +0000 (14:55 +0000)]
dm array: fix a reference counting bug in shadow_ablock
commit
ed9571f0cf1fe09d3506302610f3ccdfa1d22c4a upstream.
An old array block could have its reference count decremented below
zero when it is being replaced in the btree by a new array block.
The fix is to increment the old ablock's reference count just before
inserting a new ablock into the btree.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Fri, 29 Nov 2013 23:13:37 +0000 (18:13 -0500)]
dm snapshot: avoid snapshot space leak on crash
commit
230c83afdd9cd384348475bea1e14b80b3b6b1b8 upstream.
There is a possible leak of snapshot space in case of crash.
The reason for space leaking is that chunks in the snapshot device are
allocated sequentially, but they are finished (and stored in the metadata)
out of order, depending on the order in which copying finished.
For example, supposed that the metadata contains the following records
SUPERBLOCK
METADATA (blocks 0 ... 250)
DATA 0
DATA 1
DATA 2
...
DATA 250
Now suppose that you allocate 10 new data blocks 251-260. Suppose that
copying of these blocks finish out of order (block 260 finished first
and the block 251 finished last). Now, the snapshot device looks like
this:
SUPERBLOCK
METADATA (blocks 0 ... 250, 260, 259, 258, 257, 256)
DATA 0
DATA 1
DATA 2
...
DATA 250
DATA 251
DATA 252
DATA 253
DATA 254
DATA 255
METADATA (blocks 255, 254, 253, 252, 251)
DATA 256
DATA 257
DATA 258
DATA 259
DATA 260
Now, if the machine crashes after writing the first metadata block but
before writing the second metadata block, the space for areas DATA 250-255
is leaked, it contains no valid data and it will never be used in the
future.
This patch makes dm-snapshot complete exceptions in the same order they
were allocated, thus fixing this bug.
Note: when backporting this patch to the stable kernel, change the version
field in the following way:
* if version in the stable kernel is {1, 11, 1}, change it to {1, 12, 0}
* if version in the stable kernel is {1, 10, 0} or {1, 10, 1}, change it
to {1, 10, 2}
Userspace reads the version to determine if the bug was fixed, so the
version change is needed.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Thu, 5 Dec 2013 22:33:29 +0000 (17:33 -0500)]
dm bufio: initialize read-only module parameters
commit
4cb57ab4a2e61978f3a9b7d4f53988f30d61c27f upstream.
Some module parameters in dm-bufio are read-only. These parameters
inform the user about memory consumption. They are not supposed to be
changed by the user.
However, despite being read-only, these parameters can be set on
modprobe or insmod command line, for example:
modprobe dm-bufio current_allocated_bytes=12345
The kernel doesn't expect that these variables can be non-zero at module
initialization and if the user sets them, it results in BUG.
This patch initializes the variables in the module init routine, so that
user-supplied values are ignored.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Sterba [Fri, 6 Dec 2013 16:51:32 +0000 (17:51 +0100)]
btrfs: call mnt_drop_write after interrupted subvol deletion
commit
e43f998e47bae27e37e159915625e8d4b130153b upstream.
If btrfs_ioctl_snap_destroy blocks on the mutex and the process is
killed, mnt_write count is unbalanced and leads to unmountable
filesystem.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 10 Jan 2013 08:57:25 +0000 (03:57 -0500)]
Btrfs: fix access_ok() check in btrfs_ioctl_send()
commit
700ff4f095d78af0998953e922e041d75254518b upstream.
The closing parenthesis is in the wrong place. We want to check
"sizeof(*arg->clone_sources) * arg->clone_sources_count" instead of
"sizeof(*arg->clone_sources * arg->clone_sources_count)".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 22 Nov 2013 07:50:46 +0000 (04:50 -0300)]
media: af9035: unlock on error in af9035_i2c_master_xfer()
commit
3189ef0290dcc9f44782672fade35847cb30da00 upstream.
We introduced a couple new error paths which are missing unlocks.
Fixes:
7760e148350b ('[media] af9035: Don't use dynamic static allocation')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Antti Palosaari [Thu, 8 Aug 2013 22:41:06 +0000 (19:41 -0300)]
media: af9035: add [0413:6a05] Leadtek WinFast DTV Dongle Dual
commit
0c413d10515feae02cee967b31bb8afea8aa0d29 upstream.
It is IT9135 dual design.
Thanks to Michael Piko for reporting that!
Reported-by: Michael Piko <michael@piko.com.au>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Mon, 11 Nov 2013 14:02:52 +0000 (11:02 -0300)]
media: wm8775: fix broken audio routing
commit
3af41a337a5b270de3e65466a07f106ad97ad0c6 upstream.
Commit
5aa9ae5ed5d449a85fbf7aac3d1fdc241c542a79 inverted the mute control
state test in s_routing which caused the audio routing to fail. This broke
ivtv support for the Hauppauge video/audio input bracket (which adds additional
video and audio inputs) all the way back in kernel 2.6.36.
This fix fixes the condition and it also removes a nonsense check on the
balance control.
Bisected-by: Rajil Saraswat <rajil.s@gmail.com>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Reported-by: Rajil Saraswat <rajil.s@gmail.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Antti Palosaari [Wed, 27 Nov 2013 20:17:43 +0000 (17:17 -0300)]
media: af9033: fix broken I2C
commit
d18a88b1f535d627412b2a265d71b2f7d464860e upstream.
Driver did not work anymore since I2C has gone broken due
to recent commit:
commit
37ebaf6891ee81687bb558e8375c0712d8264ed8
[media] dvb-frontends: Don't use dynamic static allocation
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Mon, 11 Nov 2013 11:16:03 +0000 (08:16 -0300)]
media: bttv: don't setup the controls if there are no video devices
commit
f8e1b699a5504a2da05834c7cfdddb125a8ce088 upstream.
The no_video flag was checked in all other cases except one. Calling
v4l2_ctrl_handler_setup() if no_video is 1 will crash.
This wasn't noticed before since there are only two card types that
set no_video to 1, so this type of hardware is quite rare.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Lorenz Röhrl <sheepshit@gmx.de>
Tested-by: Lorenz Röhrl <sheepshit@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Fri, 25 Oct 2013 09:34:03 +0000 (06:34 -0300)]
media: saa7164: fix return value check in saa7164_initdev()
commit
89f4d45b2752df5d222b5f63919ce59e2d8afaf4 upstream.
In case of error, the function kthread_run() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H. Peter Anvin [Tue, 10 Dec 2013 22:56:06 +0000 (14:56 -0800)]
x86, build, icc: Remove uninitialized_var() from compiler-intel.h
commit
503cf95c061a0551eb684da364509297efbe55d9 upstream.
When compiling with icc, <linux/compiler-gcc.h> ends up included
because the icc environment defines __GNUC__. Thus, we neither need
nor want to have this macro defined in both compiler-gcc.h and
compiler-intel.h, and the fact that they are inconsistent just makes
the compiler spew warnings.
Reported-by: Sunil K. Pandey <sunil.k.pandey@intel.com>
Cc: Kevin B. Smith <kevin.b.smith@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-0mbwou1zt7pafij09b897lg3@git.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H. Peter Anvin [Mon, 9 Dec 2013 23:43:38 +0000 (15:43 -0800)]
x86, build: Pass in additional -mno-mmx, -mno-sse options
commit
8b3b005d675726e38bc504d2e35a991e55819155 upstream.
In checkin
5551a34e5aea x86-64, build: Always pass in -mno-sse
we unconditionally added -mno-sse to the main build, to keep newer
compilers from generating SSE instructions from autovectorization.
However, this did not extend to the special environments
(arch/x86/boot, arch/x86/boot/compressed, and arch/x86/realmode/rm).
Add -mno-sse to the compiler command line for these environments, and
add -mno-mmx to all the environments as well, as we don't want a
compiler to generate MMX code either.
This patch also removes a $(cc-option) call for -m32, since we have
long since stopped supporting compilers too old for the -m32 option,
and in fact hardcode it in other places in the Makefiles.
Reported-by: Kevin B. Smith <kevin.b.smith@intel.com>
Cc: Sunil K. Pandey <sunil.k.pandey@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: H. J. Lu <hjl.tools@gmail.com>
Link: http://lkml.kernel.org/n/tip-j21wzqv790q834n7yc6g80j1@git.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthew Garrett [Fri, 29 Nov 2013 19:44:43 +0000 (14:44 -0500)]
x86, efi: Don't use (U)EFI time services on 32 bit
commit
04bf9ba720fcc4fa313fa122b799ae0989b6cd50 upstream.
UEFI time services are often broken once we're in virtual mode. We were
already refusing to use them on 64-bit systems, but it turns out that
they're also broken on some 32-bit firmware, including the Dell Venue.
Disable them for now, we can revisit once we have the 1:1 mappings code
incorporated.
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Link: http://lkml.kernel.org/r/1385754283-2464-1-git-send-email-matthew.garrett@nebula.com
Cc: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Tue, 3 Dec 2013 14:24:30 +0000 (09:24 -0500)]
drm/radeon: fixup bad vram size on SI
commit
0ca223b029a261e82fb2f50c52eb85d510f4260e upstream.
Some boards seem to have garbage in the upper
16 bits of the vram size register. Check for
this and clamp the size properly. Fixes
boards reporting bogus amounts of vram.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Mon, 25 Nov 2013 18:20:59 +0000 (13:20 -0500)]
drm/radeon: program DCE2 audio dto just like DCE3
commit
55d4e020fb8ddd3896a8cd3351028f5c3a2c4bd3 upstream.
Seems to work like the DCE3 version despite what
the register spec says.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=71975
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Carolyn Wyborny [Sat, 14 Dec 2013 11:26:46 +0000 (03:26 -0800)]
igb: Fix for issue where values could be too high for udelay function.
commit
df29df92adda751ac04ca5149d30014b5199db81 upstream.
This patch changes the igb_phy_has_link function to check the value of the
parameter before deciding to use udelay or mdelay in order to be sure that
the value is not too high for udelay function.
Signed-off-by: Sunil K Pandey <sunil.k.pandey@intel.com>
Signed-off-by: Kevin B Smith <kevin.b.smith@intel.com>
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ujjal Roy [Thu, 21 Nov 2013 19:08:56 +0000 (11:08 -0800)]
mwifiex: fix memory leak issue for ibss join
commit
517543fd72d577dde2ebd9505dc4abf26d589f9a upstream.
For IBSS join if the requested SSID matches current SSID,
it returns without freeing the allocated beacon IE buffer.
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Fri, 25 Oct 2013 11:06:06 +0000 (13:06 +0200)]
iwlwifi: mvm: check sta_id/drain values in debugfs
commit
60765a47a433d54e4744c285ad127f182dcd80aa upstream.
The station ID must be valid, if it's out of range then
the array access may crash. Validate the station ID to
the array length, and also validate the drain value even
if that doesn't matter all that much.
Fixes:
8ca151b568b6 ("iwlwifi: add the MVM driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Wed, 20 Nov 2013 10:28:27 +0000 (11:28 +0100)]
mac80211: don't attempt to reorder multicast frames
commit
051a41fa4ee14f5c39668f0980973b9a195de560 upstream.
Multicast frames can't be transmitted as part of an aggregation
session (such a session couldn't even be set up) so don't try to
reorder them. Trying to do so would cause the reorder to stop
working correctly since multicast QoS frames (as transmitted by
the Aruba APs this was found with) would cause sequence number
confusion in the buffer.
Reported-by: Blaise Gassend <blaise@suitabletech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bob Copeland [Tue, 29 Oct 2013 22:11:59 +0000 (18:11 -0400)]
Revert "mac80211: allow disable power save in mesh"
commit
2d3db210860f1df099a35b1dd54cca35454e0361 upstream.
This reverts commit
ee1f668136b2fb6640ee2d54c2a525ea41f98211.
The aformentioned commit added a check to allow
'iw wlan0 set power_save off' to work for mesh interfaces.
However, this is problematic because it also allows
'iw wlan0 set power_save on', which will crash in short order
because all of the subsequent code manipulates sdata->u.mgd.
The power-saving states for mesh interfaces can be manipulated
through the mesh config, e.g:
'iw wlan0 set mesh_param mesh_power_save=active' (which,
despite the name, actualy disables power saving since the
setting refers to the type of sleep the interface undergoes).
Fixes:
ee1f668136b2 ("mac80211: allow disable power save in mesh")
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Moore [Wed, 4 Dec 2013 21:10:51 +0000 (16:10 -0500)]
selinux: handle TCP SYN-ACK packets correctly in selinux_ip_postroute()
commit
446b802437f285de68ffb8d6fac3c44c3cab5b04 upstream.
In selinux_ip_postroute() we perform access checks based on the
packet's security label. For locally generated traffic we get the
packet's security label from the associated socket; this works in all
cases except for TCP SYN-ACK packets. In the case of SYN-ACK packet's
the correct security label is stored in the connection's request_sock,
not the server's socket. Unfortunately, at the point in time when
selinux_ip_postroute() is called we can't query the request_sock
directly, we need to recreate the label using the same logic that
originally labeled the associated request_sock.
See the inline comments for more explanation.
Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Tested-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Moore [Wed, 4 Dec 2013 21:10:45 +0000 (16:10 -0500)]
selinux: handle TCP SYN-ACK packets correctly in selinux_ip_output()
commit
47180068276a04ed31d24fe04c673138208b07a9 upstream.
In selinux_ip_output() we always label packets based on the parent
socket. While this approach works in almost all cases, it doesn't
work in the case of TCP SYN-ACK packets when the correct label is not
the label of the parent socket, but rather the label of the larval
socket represented by the request_sock struct.
Unfortunately, since the request_sock isn't queued on the parent
socket until *after* the SYN-ACK packet is sent, we can't lookup the
request_sock to determine the correct label for the packet; at this
point in time the best we can do is simply pass/NF_ACCEPT the packet.
It must be said that simply passing the packet without any explicit
labeling action, while far from ideal, is not terrible as the SYN-ACK
packet will inherit any IP option based labeling from the initial
connection request so the label *should* be correct and all our
access controls remain in place so we shouldn't have to worry about
information leaks.
Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Tested-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sujith Manoharan [Tue, 26 Nov 2013 01:51:39 +0000 (07:21 +0530)]
ath9k: Fix XLNA bias strength
commit
a1783a7b0846fc6414483e6caf646db72023fffd upstream.
The EEPROM parameter to determine whether the bias
strength values for XLNA have to be applied is part
of the miscConfiguration field and not featureEnable.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sujith Manoharan [Tue, 26 Nov 2013 01:51:08 +0000 (07:21 +0530)]
ath9k: Fix QuickDrop usage
commit
93c1cfbe598f72cfa7be49e4a7d2a1d482e15119 upstream.
Bit 5 in the miscConfiguration field of the base EEPROM
header denotes whether QuickDrop is enabled or not. Fix
the incorrect usage of BIT(1) and also make sure that
this is done only for the required chips.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Thu, 28 Nov 2013 20:10:38 +0000 (22:10 +0200)]
drm/i915: Fix pipe CSC post offset calculation
commit
32cf0cb0294814cb1ee5d8727e9aac0e9aa80d2e upstream.
We were miscalculating the pipe CSC post offset for the full->limited
range conversion. The resulting post offset was double what it was
supposed to be, which caused blacks to come out grey when using
limited range output on HSW+.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71769
Tested-by: Lauri Mylläri <lauri.myllari@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Pizunski [Fri, 13 Dec 2013 01:12:23 +0000 (17:12 -0800)]
drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap
commit
eb3c227289840eed95ddfb0516046f08d8993940 upstream.
Update month and day of month to the alarm month/day instead of current
day/month when setting the RTC alarm mask.
Signed-off-by: Linus Pizunski <linus@narrativeteam.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hong H. Pham [Sat, 7 Dec 2013 14:06:33 +0000 (09:06 -0500)]
powerpc: Fix PTE page address mismatch in pgtable ctor/dtor
commit
cf77ee54362a245f9a01f240adce03a06c05eb68 upstream.
In pte_alloc_one(), pgtable_page_ctor() is passed an address that has
not been converted by page_address() to the newly allocated PTE page.
When the PTE is freed, __pte_free_tlb() calls pgtable_page_dtor()
with an address to the PTE page that has been converted by page_address().
The mismatch in the PTE's page address causes pgtable_page_dtor() to access
invalid memory, so resources for that PTE (such as the page lock) is not
properly cleaned up.
On PPC32, only SMP kernels are affected.
On PPC64, only SMP kernels with 4K page size are affected.
This bug was introduced by commit
d614bb041209fd7cb5e4b35e11a7b2f6ee8f62b8
"powerpc: Move the pte free routines from common header".
On a preempt-rt kernel, a spinlock is dynamically allocated for each
PTE in pgtable_page_ctor(). When the PTE is freed, calling
pgtable_page_dtor() with a mismatched page address causes a memory leak,
as the pointer to the PTE's spinlock is bogus.
On mainline, there isn't any immediately obvious symptoms, but the
problem still exists here.
Fixes:
d614bb041209fd7c "powerpc: Move the pte free routes from common header"
Cc: Paul Mackerras <paulus@samba.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Hong H. Pham <hong.pham@windriver.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Antti Palosaari [Wed, 27 Nov 2013 20:23:00 +0000 (17:23 -0300)]
media: af9035: fix broken I2C and USB I/O
commit
9323297dc0ea9141f8099e474657391bb3ad98f8 upstream.
There was three small buffer len calculation bugs which caused
driver non-working. These are coming from recent commit:
commit
7760e148350bf6df95662bc0db3734e9d991cb03
[media] af9035: Don't use dynamic static allocation
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Engelmayer [Wed, 27 Nov 2013 02:16:17 +0000 (18:16 -0800)]
Input: usbtouchscreen - separate report and transmit buffer size handling
commit
4ef38351d770cc421f4a0c7a849fd13207fc5741 upstream.
This patch supports the separate handling of the USB transfer buffer length
and the length of the buffer used for multi packet support. For devices
supporting multiple report or diagnostic packets, the USB transfer size is now
limited to the USB endpoints wMaxPacketSize - otherwise it defaults to the
configured report packet size as before.
This fixes an issue where event reporting can be delayed for an arbitrary
time for multi packet devices. For instance the report size for eGalax devices
is defined to the 16 byte maximum diagnostic packet size as opposed to the 5
byte report packet size. In case the driver requests 16 byte from the USB
interrupt endpoint, the USB host controller driver needs to split up the
request into 2 accesses according to the endpoints wMaxPacketSize of 8 byte.
When the first transfer is answered by the eGalax device with not less than
the full 8 byte requested, the host controller has got no way of knowing
whether the touch controller has got additional data queued and will issue
the second transfer. If per example a liftoff event finishes at such a
wMaxPacketSize boundary, the data will not be available to the usbtouch driver
until a further event is triggered and transfered to the host. From user
perspective the BTN_TOUCH release event in this case is stuck until the next
touch down event.
Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fangxiaozhi (Franko) [Mon, 2 Dec 2013 09:00:11 +0000 (09:00 +0000)]
USB: option: support new huawei devices
commit
2bf308d7bc5e8cdd69672199f59532f35339133c upstream.
Add new supporting declarations to option.c, to support Huawei new
devices with new bInterfaceProtocol value.
Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo Zacarias [Mon, 11 Nov 2013 12:59:15 +0000 (09:59 -0300)]
USB: serial: option: blacklist interface 1 for Huawei E173s-6
commit
8f173e22abf2258ddfa73f46eadbb6a6c29f1631 upstream.
Interface 1 on this device isn't for option to bind to otherwise an oops
on usb_wwan with log flooding will happen when accessing the port:
tty_release: ttyUSB1: read/write wait queue active!
It doesn't seem to respond to QMI if it's added to qmi_wwan so don't add
it there - it's likely used by the card reader.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Grzeschik [Mon, 11 Nov 2013 22:43:32 +0000 (23:43 +0100)]
usb: gadget: composite: reset delayed_status on reset_config
commit
2bac51a1827a18821150ed8c9f9752c02f9c2b02 upstream.
The delayed_status value is used to keep track of status response
packets on ep0. It needs to be reset or the set_config function would
still delay the answer, if the usb device got unplugged while waiting
for setup_continue to be called.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Fri, 1 Nov 2013 16:05:12 +0000 (12:05 -0400)]
usb: dwc3: fix implementation of endpoint wedge
commit
a535d81c92615b8ffb99b7e1fd1fb01effaed1af upstream.
The dwc3 UDC driver doesn't implement endpoint wedging correctly.
When an endpoint is wedged, the gadget driver should be allowed to
clear the wedge by calling usb_ep_clear_halt(). Only the host is
prevented from resetting the endpoint.
This patch fixes the implementation.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julius Werner [Thu, 7 Nov 2013 18:59:14 +0000 (10:59 -0800)]
usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED
commit
2d51f3cd11f414c56a87dc018196b85fd50b04a4 upstream.
This patch adds a check for USB_STATE_NOTATTACHED to the
hub_port_warm_reset_required() workaround for ports that end up in
Compliance Mode in hub_events() when trying to decide which reset
function to use. Trying to call usb_reset_device() with a NOTATTACHED
device will just fail and leave the port broken.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeff Layton [Mon, 2 Dec 2013 20:26:19 +0000 (15:26 -0500)]
nfsd: when reusing an existing repcache entry, unhash it first
commit
781c2a5a5f75eacc04663aced0f0f1a648d4f308 upstream.
The DRC code will attempt to reuse an existing, expired cache entry in
preference to allocating a new one. It'll then search the cache, and if
it gets a hit it'll then free the cache entry that it was going to
reuse.
The cache code doesn't unhash the entry that it's going to reuse
however, so it's possible for it end up designating an entry for reuse
and then subsequently freeing the same entry after it finds it. This
leads it to a later use-after-free situation and usually some list
corruption warnings or an oops.
Fix this by simply unhashing the entry that we intend to reuse. That
will mean that it's not findable via a search and should prevent this
situation from occurring.
Reported-by: Christoph Hellwig <hch@infradead.org>
Reported-by: g. artim <gartim@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Thu, 12 Dec 2013 17:38:42 +0000 (09:38 -0800)]
futex: fix handling of read-only-mapped hugepages
commit
f12d5bfceb7e1f9051563381ec047f7f13956c3c upstream.
The hugepage code had the exact same bug that regular pages had in
commit
7485d0d3758e ("futexes: Remove rw parameter from
get_futex_key()").
The regular page case was fixed by commit
9ea71503a8ed ("futex: Fix
regression with read only mappings"), but the transparent hugepage case
(added in
a5b338f2b0b1: "thp: update futex compound knowledge") case
remained broken.
Found by Dave Jones and his trinity tool.
Reported-and-tested-by: Dave Jones <davej@fedoraproject.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Khalid Aziz [Wed, 27 Nov 2013 22:19:25 +0000 (15:19 -0700)]
PCI: Disable Bus Master only on kexec reboot
commit
4fc9bbf98fd66f879e628d8537ba7c240be2b58e upstream.
Add a flag to tell the PCI subsystem that kernel is shutting down in
preparation to kexec a kernel. Add code in PCI subsystem to use this flag
to clear Bus Master bit on PCI devices only in case of kexec reboot.
This fixes a power-off problem on Acer Aspire V5-573G and likely other
machines and avoids any other issues caused by clearing Bus Master bit on
PCI devices in normal shutdown path. The problem was introduced by
b566a22c2332 ("PCI: disable Bus Master on PCI device shutdown").
This patch is based on discussion at
http://marc.info/?l=linux-pci&m=
138425645204355&w=2
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63861
Reported-by: Chang Liu <cl91tp@gmail.com>
Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 31 Oct 2013 18:00:10 +0000 (21:00 +0300)]
xfs: underflow bug in xfs_attrlist_by_handle()
commit
31978b5cc66b8ba8a7e8eef60b12395d41b7b890 upstream.
If we allocate less than sizeof(struct attrlist) then we end up
corrupting memory or doing a ZERO_PTR_SIZE dereference.
This can only be triggered with CAP_SYS_ADMIN.
Reported-by: Nico Golde <nico@ngolde.de>
Reported-by: Fabian Yamaguchi <fabs@goesec.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Chinner [Thu, 21 Nov 2013 04:41:06 +0000 (15:41 +1100)]
xfs: growfs overruns AGFL buffer on V4 filesystems
commit
f94c44573e7c22860e2c3dfe349c45f72ba35ad3 upstream.
This loop in xfs_growfs_data_private() is incorrect for V4
superblocks filesystems:
for (bucket = 0; bucket < XFS_AGFL_SIZE(mp); bucket++)
agfl->agfl_bno[bucket] = cpu_to_be32(NULLAGBLOCK);
For V4 filesystems, we don't have a agfl header structure, and so
XFS_AGFL_SIZE() returns an entire sector's worth of entries, which
we then index from an offset into the sector. Hence: buffer overrun.
This problem was introduced in 3.10 by commit
77c95bba ("xfs: add
CRC checks to the AGFL") which changed the AGFL structure but failed
to update the growfs code to handle the different structures.
Fix it by using the correct offset into the buffer for both V4 and
V5 filesystems.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jean Delvare [Thu, 12 Dec 2013 07:05:32 +0000 (08:05 +0100)]
hwmon: (w83l768ng) Fix fan speed control range
commit
33a7ab91d509fa33b4bcd3ce0038cc80298050da upstream.
The W83L786NG stores the fan speed on 4 bits while the sysfs interface
uses a 0-255 range. Thus the driver should scale the user input down
to map it to the device range, and scale up the value read from the
device before presenting it to the user. The reserved register nibble
should be left unchanged.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Carnes [Thu, 12 Dec 2013 07:05:32 +0000 (08:05 +0100)]
hwmon: (w83l786ng) Fix fan speed control mode setting and reporting
commit
cf7559bc053471f32373d71d04a9aa19e0b48d59 upstream.
The wrong mask is used, which causes some fan speed control modes
(pwmX_enable) to be incorrectly reported, and some modes to be
impossible to set.
[JD: add subject and description.]
Signed-off-by: Brian Carnes <bmcarnes@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
José Miguel Gonçalves [Wed, 11 Dec 2013 11:11:13 +0000 (11:11 +0000)]
hwmon: HIH-6130: Support I2C bus drivers without I2C_FUNC_SMBUS_QUICK
commit
efabcc2123f0ed47870033b8d6fc73b50d76d635 upstream.
Some I2C bus drivers do not allow zero-length data transfers which are
required to start a measurement with the HIH6130/1 sensor. Nevertheless,
we can overcome this limitation by writing a zero dummy byte. This byte
is ignored by the sensor and was verified to be working with the OMAP
I2C bus driver in a BeagleBone board.
Signed-off-by: José Miguel Gonçalves <jose.goncalves@inov.pt>
[Guenter Roeck: Simplified complexity of write_length initialization]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 12 Dec 2013 07:05:33 +0000 (08:05 +0100)]
hwmon: Prevent some divide by zeros in FAN_TO_REG()
commit
3806b45ba4655147a011df03242cc197ab986c43 upstream.
The "rpm * div" operations can overflow here, so this patch adds an
upper limit to rpm to prevent that. Jean Delvare helped me with this
patch.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Roger Lucas <vt8231@hiddenengine.co.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gleb Natapov [Thu, 12 Dec 2013 20:20:08 +0000 (21:20 +0100)]
KVM: x86: fix guest-initiated crash with x2apic (CVE-2013-6376)
commit
17d68b763f09a9ce824ae23eb62c9efc57b69271 upstream.
A guest can cause a BUG_ON() leading to a host kernel crash.
When the guest writes to the ICR to request an IPI, while in x2apic
mode the following things happen, the destination is read from
ICR2, which is a register that the guest can control.
kvm_irq_delivery_to_apic_fast uses the high 16 bits of ICR2 as the
cluster id. A BUG_ON is triggered, which is a protection against
accessing map->logical_map with an out-of-bounds access and manages
to avoid that anything really unsafe occurs.
The logic in the code is correct from real HW point of view. The problem
is that KVM supports only one cluster with ID 0 in clustered mode, but
the code that has the bug does not take this into account.
Reported-by: Lars Bull <larsbull@google.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Honig [Wed, 20 Nov 2013 18:23:22 +0000 (10:23 -0800)]
KVM: x86: Convert vapic synchronization to _cached functions (CVE-2013-6368)
commit
fda4e2e85589191b123d31cdc21fd33ee70f50fd upstream.
In kvm_lapic_sync_from_vapic and kvm_lapic_sync_to_vapic there is the
potential to corrupt kernel memory if userspace provides an address that
is at the end of a page. This patches concerts those functions to use
kvm_write_guest_cached and kvm_read_guest_cached. It also checks the
vapic_address specified by userspace during ioctl processing and returns
an error to userspace if the address is not a valid GPA.
This is generally not guest triggerable, because the required write is
done by firmware that runs before the guest. Also, it only affects AMD
processors and oldish Intel that do not have the FlexPriority feature
(unless you disable FlexPriority, of course; then newer processors are
also affected).
Fixes:
b93463aa59d6 ('KVM: Accelerated apic support')
Reported-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Honig [Tue, 19 Nov 2013 22:12:18 +0000 (14:12 -0800)]
KVM: x86: Fix potential divide by 0 in lapic (CVE-2013-6367)
commit
b963a22e6d1a266a67e9eecc88134713fd54775c upstream.
Under guest controllable circumstances apic_get_tmcct will execute a
divide by zero and cause a crash. If the guest cpuid support
tsc deadline timers and performs the following sequence of requests
the host will crash.
- Set the mode to periodic
- Set the TMICT to 0
- Set the mode bits to 11 (neither periodic, nor one shot, nor tsc deadline)
- Set the TMICT to non-zero.
Then the lapic_timer.period will be 0, but the TMICT will not be. If the
guest then reads from the TMCCT then the host will perform a divide by 0.
This patch ensures that if the lapic_timer.period is 0, then the division
does not occur.
Reported-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Honig [Tue, 19 Nov 2013 00:09:22 +0000 (16:09 -0800)]
KVM: Improve create VCPU parameter (CVE-2013-4587)
commit
338c7dbadd2671189cec7faf64c84d01071b3f96 upstream.
In multiple functions the vcpu_id is used as an offset into a bitfield. Ag
malicious user could specify a vcpu_id greater than 255 in order to set or
clear bits in kernel memory. This could be used to elevate priveges in the
kernel. This patch verifies that the vcpu_id provided is less than 255.
The api documentation already specifies that the vcpu_id must be less than
max_vcpus, but this is currently not checked.
Reported-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konstantin Khlebnikov [Thu, 5 Dec 2013 13:23:48 +0000 (14:23 +0100)]
ARM: 7913/1: fix framepointer check in unwind_frame
commit
3abb6671a9c04479c4bd026798a05f857393b7e2 upstream.
This patch fixes corner case when (fp + 4) overflows unsigned long,
for example: fp = 0xFFFFFFFF -> fp + 4 == 3.
Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konstantin Khlebnikov [Thu, 5 Dec 2013 13:21:36 +0000 (14:21 +0100)]
ARM: 7912/1: check stack pointer in get_wchan
commit
1b15ec7a7427d4188ba91b9bbac696250a059d22 upstream.
get_wchan() is lockless. Task may wakeup at any time and change its own stack,
thus each next stack frame may be overwritten and filled with random stuff.
/proc/$pid/stack interface had been disabled for non-current tasks, see [1]
But 'wchan' still allows to trigger stack frame unwinding on volatile stack.
This patch fixes oops in unwind_frame() by adding stack pointer validation on
each step (as x86 code do), unwind_frame() already checks frame pointer.
Also I've found another report of this oops on stackoverflow (irony).
Link: http://www.spinics.net/lists/arm-kernel/msg110589.html
Link: http://stackoverflow.com/questions/18479894/unwind-frame-cause-a-kernel-paging-error
Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roger Quadros [Mon, 9 Dec 2013 01:39:02 +0000 (18:39 -0700)]
ARM: OMAP3: hwmod data: Don't prevent RESET of USB Host module
commit
7f4d3641e2548d1ac5dee837ff434df668a2810c upstream.
Unlike what the comment states, errata i660 does not state that we
can't RESET the USB host module. Instead it states that RESET is the
only way to recover from a deadlock situation.
RESET ensures that the module is in a known good state irrespective
of what bootloader does with the module, so it must be done at boot.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> # Panda, BeagleXM
Fixes:
de231388cb80 ("ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3")
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergei Ianovich [Tue, 10 Dec 2013 04:39:15 +0000 (08:39 +0400)]
ARM: pxa: prevent PXA270 occasional reboot freezes
commit
ff88b4724fde18056a4c539f7327389aec0f4c2d upstream.
Erratum 71 of PXA270M Processor Family Specification Update
(April 19, 2010) explains that watchdog reset time is just
8us insead of 10ms in EMTS.
If SDRAM is not reset, it causes memory bus congestion and
the device hangs. We put SDRAM in selfresh mode before watchdog
reset, removing potential freezes.
Without this patch PXA270-based ICP DAS LP-8x4x hangs after up to 40
reboots. With this patch it has successfully rebooted 500 times.
Signed-off-by: Sergei Ianovich <ynvich@gmail.com>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin-Solenikov [Sat, 16 Nov 2013 12:47:50 +0000 (16:47 +0400)]
ARM: pxa: tosa: fix keys mapping
commit
506cac15ac86f204b83e3cfccde73eeb4e7c5f34 upstream.
When converting from tosa-keyboard driver to matrix keyboard, tosa keys
received extra 1 column shift. Replace that with correct values to make
keyboard work again.
Fixes:
f69a6548c9d5 ('[ARM] pxa/tosa: make use of the matrix keypad driver')
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anssi Hannula [Tue, 10 Dec 2013 20:46:34 +0000 (22:46 +0200)]
ALSA: hda - hdmi: Fix IEC958 ctl indexes for some simple HDMI devices
commit
c9a6338aecdb92f9d015ecc26d203e54250bebbb upstream.
In case a single HDA card has both HDMI and S/PDIF outputs, the S/PDIF
outputs will have their IEC958 controls created starting from index 16
and the HDMI controls will be created starting from index 0.
However, HDMI simple_playback_build_controls() as used by old VIA and
NVIDIA codecs incorrectly requests the IEC958 controls to be created
with an S/PDIF type instead of HDMI.
In case the card has other codecs that have HDMI outputs, the controls
will be created with wrong index=16, causing them to e.g. be unreachable
by the ALSA "hdmi" alias.
Fix that by making simple_playback_build_controls() request controls
with HDMI indexes.
Not many cards have an affected configuration, but e.g. ASUS M3N78-VM
contains an integrated NVIDIA HDA "card" with:
- a VIA codec that has, among others, an S/PDIF pin incorrectly
labelled as an HDMI pin, and
- an NVIDIA MCP7x HDMI codec.
Reported-by: MysterX on #openelec
Tested-by: MysterX on #openelec
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 10 Dec 2013 16:33:49 +0000 (17:33 +0100)]
ALSA: hda - Mute all aamix inputs as default
commit
ebb93c057dda376414fbc499ad6ace9b527dff5a upstream.
Not all channels have been initialized, so far, especially when aamix
NID itself doesn't have amps but its leaves have. This patch fixes
these holes. Otherwise you might get unexpected loopback inputs,
e.g. from surround channels.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 10 Dec 2013 16:29:26 +0000 (17:29 +0100)]
ALSA: hda - Add static DAC/pin mapping for
AD1986A codec
commit
3690739b013504d33fe9348dd45f6b126aa370fb upstream.
AD1986A codec is a pretty old codec and has really many hidden
restrictions. One of such is that each DAC is dedicated to certain
pin although there are possible connections. Currently, the generic
parser tries to assign individual DACs as much as possible, and this
lead to two bad situations: connections where the sound actually
doesn't work, and connections conflicting other channels.
We may fix this by trying to find the best connections more harder,
but as of now, it's easier to give some hints for paired DAC/pin
connections and honor them if available, since such a hint is needed
only for specific codecs (right now only
AD1986A, and there will be
unlikely any others in future).
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64971
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66621
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefano Panella [Tue, 10 Dec 2013 14:20:28 +0000 (14:20 +0000)]
ALSA: memalloc.h - fix wrong truncation of dma_addr_t
commit
932e9dec380c67ec15ac3eb073bb55797d8b4801 upstream.
When running a 32bit kernel the hda_intel driver is still reporting
a 64bit dma_mask if the HW supports it.
From sound/pci/hda/hda_intel.c:
/* allow 64bit DMA address if supported by H/W */
if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
else {
pci_set_dma_mask(pci, DMA_BIT_MASK(32));
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
}
which means when there is a call to dma_alloc_coherent from
snd_malloc_dev_pages a machine address bigger than 32bit can be returned.
This can be true in particular if running the 32bit kernel as a pv dom0
under the Xen Hypervisor or PAE on bare metal.
The problem is that when calling setup_bdle to program the BLE the
dma_addr_t returned from the dma_alloc_coherent is wrongly truncated
from snd_sgbuf_get_addr if running a 32bit kernel:
static inline dma_addr_t snd_sgbuf_get_addr(struct snd_dma_buffer *dmab,
size_t offset)
{
struct snd_sg_buf *sgbuf = dmab->private_data;
dma_addr_t addr = sgbuf->table[offset >> PAGE_SHIFT].addr;
addr &= PAGE_MASK;
return addr + offset % PAGE_SIZE;
}
where PAGE_MASK in a 32bit kernel is zeroing the upper 32bit af addr.
Without this patch the HW will fetch the 32bit truncated address,
which is not the one obtained from dma_alloc_coherent and will result
to a non working audio but can corrupt host memory at a random location.
The current patch apply to
v3.13-rc3-74-g6c843f5
Signed-off-by: Stefano Panella <stefano.panella@citrix.com>
Reviewed-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 10 Dec 2013 11:15:52 +0000 (12:15 +0100)]
ALSA: compress: Fix 64bit ABI incompatibility
commit
6733cf572a9e20db2b7580a5dd39d5782d571eec upstream.
snd_pcm_uframes_t is defined as unsigned long so it would take
different sizes depending on 32 or 64bit architectures. As we don't
want this ABI incompatibility, and there is no real 64bit user yet,
let's make it the fixed size with __u32.
Also bump the protocol version number to 0.1.2.
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mag [Mon, 26 Aug 2013 07:22:01 +0000 (00:22 -0700)]
Input: xpad - add signature for Razer Onza Classic Edition
commit
ed06349fe8d12dcb718984862b6e839fc8606c34 upstream.
Signed-off-by: Nol "Mag" Archinova <magissia@magissia.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jim Quinlan [Tue, 27 Aug 2013 20:57:51 +0000 (16:57 -0400)]
MIPS: DMA: For BMIPS5000 cores flush region just like non-coherent R10000
commit
f86f55d3ad21b21b736bdeb29bee0f0937b77138 upstream.
The BMIPS5000 (Zephyr) processor utilizes instruction speculation. A
stale misprediction address in either the JTB or the CRS may trigger
a prefetch inside a region that is currently being used by a DMA engine,
which is not IO-coherent. This prefetch will fetch a line into the
scache, and that line will soon become stale (ie wrong) during/after the
DMA. Mayhem ensues.
In dma-default.c, the r10000 is handled as a special case in the same way
that we want to handle Zephyr. So we generalize the exception cases into
a function, and include Zephyr as one of the processors that needs this
special care.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/5776/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: John Ulvr <julvr@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 12 Dec 2013 06:36:44 +0000 (22:36 -0800)]
Linux 3.10.24
Tom Lendacky [Thu, 5 Dec 2013 19:09:53 +0000 (13:09 -0600)]
crypto: scatterwalk - Use sg_chain_ptr on chain entries
commit
389a5390583a18e45bc4abd4439291abec5e7a63 upstream.
Now that scatterwalk_sg_chain sets the chain pointer bit the sg_page
call in scatterwalk_sg_next hits a BUG_ON when CONFIG_DEBUG_SG is
enabled. Use sg_chain_ptr instead of sg_page on a chain entry.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaud Ebalard [Tue, 5 Nov 2013 20:45:48 +0000 (21:45 +0100)]
ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable
commit
12b69a599745fc9e203f61fbb7160b2cc5f479dd upstream.
Various Marvell datasheets advertise second PCIe unit of mv78230
flavour of Armada XP as x4/quad x1 capable. This second unit is in
fact only x1 capable. This patch fixes current mv78230 .dtsi to
reflect that, i.e. makes 1.0 the second interface (instead of 2.0
at the moment). This was successfully tested on a mv78230-based
ReadyNAS 2120 platform with a x1 device (FL1009 XHCI controller)
connected to this second interface.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaud Ebalard [Tue, 5 Nov 2013 20:46:02 +0000 (21:46 +0100)]
ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260
commit
2163e61c92d9337e721a0d067d88ae62b52e0d3e upstream.
mv78260 flavour of Marvell Armada XP SoC has 3 PCIe units. The
two first units are both x4 and quad x1 capable. The third unit
is only x4 capable. This patch fixes mv78260 .dtsi to reflect
those capabilities.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Tue, 3 Dec 2013 21:56:56 +0000 (13:56 -0800)]
drivers/char/i8k.c: add Dell XPLS L421X
commit
9aa5b0181bdf335f0b731d8502e128a862884bcd upstream.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=60772
Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Leho Kraav <leho@kraav.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Cluytens [Tue, 3 Dec 2013 13:18:57 +0000 (14:18 +0100)]
USB: cdc-acm: Added support for the Lenovo RD02-D400 USB Modem
commit
3b59d16c513da258ec8f6a0b4db85f257a0380d6 upstream.
Signed-off-by: David Cluytens <david.cluytens@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Leitner [Fri, 8 Nov 2013 21:53:11 +0000 (22:53 +0100)]
USB: spcp8x5: correct handling of CS5 setting
commit
711fbdfbf2bc4827214a650afe3f64767a1aba16 upstream.
This patch removes an erroneous check of CSIZE, which made it impossible to set
CS5.
Compiles clean, but couldn't test against hardware.
Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Leitner [Fri, 8 Nov 2013 21:52:34 +0000 (22:52 +0100)]
USB: mos7840: correct handling of CS5 setting
commit
78692cc3382e0603a47e1f2aaeffe0d99891994d upstream.
This patch removes an erroneous check of CSIZE, which made it impossible to set
CS5.
Compiles clean, but couldn't test against hardware.
Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Leitner [Tue, 5 Nov 2013 17:02:34 +0000 (18:02 +0100)]
USB: ftdi_sio: fixed handling of unsupported CSIZE setting
commit
8704211f65a2106ba01b6ac9727cdaf9ca11594c upstream.
FTDI UARTs support only 7 or 8 data bits. Until now the ftdi_sio driver would
only report this limitation for CS6 to dmesg and fail to reflect this fact to
tcgetattr.
This patch reverts the unsupported CSIZE setting and reports the fact with less
severance to dmesg for both CS5 and CS6.
To test the patch it's sufficient to call
stty -F /dev/ttyUSB0 cs5
which will succeed without the patch and report an error with the patch
applied.
As an additional fix this patch ensures that the control request will always
include a data bit size.
Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Leitner [Mon, 4 Nov 2013 18:40:43 +0000 (19:40 +0100)]
USB: pl2303: fixed handling of CS5 setting
commit
a313249937820f8b1996133fc285efbd6aad2c5b upstream.
This patch fixes the CS5 setting on the PL2303 USB-to-serial devices. CS5 has a
value of 0 and the CSIZE setting has been skipped altogether by the enclosing
if. Tested on 3.11.6 and the scope shows the correct output after the fix has
been applied.
Tagged to be added to stable, because it fixes a user visible driver bug and is
simple enough to backport easily.
Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Winkler [Thu, 5 Dec 2013 07:34:44 +0000 (09:34 +0200)]
mei: add 9 series PCH mei device ids
commit
76a9635979e543f04a5885198e68ff28e3311b67 upstream.
And Lynx Point H Refresh and Wildcat Point LP
device ids.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Winkler [Wed, 16 Oct 2013 09:09:43 +0000 (12:09 +0300)]
mei: me: add Lynx Point Wellsburg work station device id
commit
838b3a6d62413b336f3dde15ecff161070358957 upstream.
add missing device id for LPT based work station
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Gundersen [Thu, 31 Oct 2013 07:44:49 +0000 (00:44 -0700)]
Input: mousedev - allow disabling even without CONFIG_EXPERT
commit
dfaaed08ecc01bd513248ba7999daf50ce028352 upstream.
Moust (if not all) modern software, including X, uses /dev/eventX rather than
the legacy /dev/mouseX devices. It therefore makes sense for general-purpose
(distro) kernels to use MOUSEDV=m (or even n), so let's drop the EXPERT=y
requirement.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>