OSDN Git Service
Chris Wilson [Mon, 18 Nov 2019 23:02:40 +0000 (23:02 +0000)]
drm/i915/gt: Make intel_ring_unpin() safe for concurrent pint
In order to avoid some nasty mutex inversions, commit
09c5ab384f6f
("drm/i915: Keep rings pinned while the context is active") allowed the
intel_ring unpinning to be run concurrently with the next context
pinning it. Thus each step in intel_ring_unpin() needed to be atomic and
ordered in a nice onion with intel_ring_pin() so that the lifetimes
overlapped and were always safe.
Sadly, a few steps in intel_ring_unpin() were overlooked, such as
closing the read/write pointers of the ring and discarding the
intel_ring.vaddr, as these steps were not serialised with
intel_ring_pin() and so could leave the ring in disarray.
Fixes:
09c5ab384f6f ("drm/i915: Keep rings pinned while the context is active")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118230254.2615942-6-chris@chris-wilson.co.uk
(cherry picked from commit
a266bf42006004306dd48a9082c35dfbff153307)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Mon, 25 Nov 2019 10:58:58 +0000 (10:58 +0000)]
drm/i915/gt: Schedule request retirement when timeline idles
The major drawback of commit
7e34f4e4aad3 ("drm/i915/gen8+: Add RC6 CTX
corruption WA") is that it disables RC6 while Skylake (and friends) is
active, and we do not consider the GPU idle until all outstanding
requests have been retired and the engine switched over to the kernel
context. If userspace is idle, this task falls onto our background idle
worker, which only runs roughly once a second, meaning that userspace has
to have been idle for a couple of seconds before we enable RC6 again.
Naturally, this causes us to consume considerably more energy than
before as powersaving is effectively disabled while a display server
(here's looking at you Xorg) is running.
As execlists will get a completion event as each context is completed,
we can use this interrupt to queue a retire worker bound to this engine
to cleanup idle timelines. We will then immediately notice the idle
engine (without userspace intervention or the aid of the background
retire worker) and start parking the GPU. Thus during light workloads,
we will do much more work to idle the GPU faster... Hopefully with
commensurate power saving!
v2: Watch context completions and only look at those local to the engine
when retiring to reduce the amount of excess work we perform.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112315
References:
7e34f4e4aad3 ("drm/i915/gen8+: Add RC6 CTX corruption WA")
References:
2248a28384fe ("drm/i915/gen8+: Add RC6 CTX corruption WA")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-3-chris@chris-wilson.co.uk
(cherry picked from commit
4f88f8747fa43c97c3b3712d8d87295ea757cc51)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Mon, 25 Nov 2019 10:58:57 +0000 (10:58 +0000)]
drm/i915/gt: Adapt engine_park synchronisation rules for engine_retire
In the next patch, we will introduce a new asynchronous retirement
worker, fed by execlists CS events. Here we may queue a retirement as
soon as a request is submitted to HW (and completes instantly), and we
also want to process that retirement as early as possible and cannot
afford to postpone (as there may not be another opportunity to retire it
for a few seconds). To allow the new async retirer to run in parallel
with our submission, pull the __i915_request_queue (that passes the
request to HW) inside the timelines spinlock so that the retirement
cannot release the timeline before we have completed the submission.
v2: Actually to play nicely with engine_retire, we have to raise the
timeline.active_lock before releasing the HW. intel_gt_retire_requsts()
is still serialised by the outer lock so they cannot see this
intermediate state, and engine_retire is serialised by HW submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125105858.1718307-2-chris@chris-wilson.co.uk
(cherry picked from commit
88a4655e75ac8f55eea5e3f38b176cba9cf653b5)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Mon, 25 Nov 2019 11:25:20 +0000 (11:25 +0000)]
drm/i915/execlists: Fixup cancel_port_requests()
I rushed a last minute correction to cancel_port_requests() to prevent
the snooping of *execlists->active as the inflight array was being
updated, without noticing we iterated the inflight array starting from
active! Oops.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112387
Fixes:
97f9af78f38d ("drm/i915/gt: Mark the execlists->active as the primary volatile access")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125112520.1760492-1-chris@chris-wilson.co.uk
(cherry picked from commit
da0ef77e1e0ccff703efee82406c629d5c4f4bbb)
[Joonas: Fixed Fixes: tag to match drm-intel-next-fixes]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Mon, 25 Nov 2019 09:43:18 +0000 (09:43 +0000)]
drm/i915/gt: Mark the execlists->active as the primary volatile access
Since we want to do a lockless read of the current active request, and
that request is written to by process_csb also without serialisation, we
need to instruct gcc to take care in reading the pointer itself.
Otherwise, we have observed execlists_active() to report 0x40.
[ 2400.760381] igt/para-4098 1..s. 2376479300us : process_csb: rcs0 cs-irq head=3, tail=4
[ 2400.760826] igt/para-4098 1..s. 2376479303us : process_csb: rcs0 csb[4]: status=0x00000001:0x00000000
[ 2400.761271] igt/para-4098 1..s. 2376479306us : trace_ports: rcs0: promote { b9c59:2622, b9c55:2624 }
[ 2400.761726] igt/para-4097 0d... 2376479311us : __i915_schedule: rcs0: -
2147483648->3, inflight:
0000000000000040, rq:
ffff888208c1e940
which is impossible!
The answer is that as we keep the existing execlists->active pointing
into the array as we copy over that array, the unserialised read may see
a partial pointer value.
Fixes:
df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191125094318.1630806-1-chris@chris-wilson.co.uk
(cherry picked from commit
331bf90591573dfe6c8e892239713ef9702f1396)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 20 Nov 2019 16:55:14 +0000 (16:55 +0000)]
drm/i915/gt: Unlock engine-pm after queuing the kernel context switch
In commit
a79ca656b648 ("drm/i915: Push the wakeref->count deferral to
the backend"), I erroneously concluded that we last modify the engine
inside __i915_request_commit() meaning that we could enable concurrent
submission for userspace as we enqueued this request. However, this
falls into a trap with other users of the engine->kernel_context waking
up and submitting their request before the idle-switch is queued, with
the result that the kernel_context is executed out-of-sequence most
likely upsetting the GPU and certainly ourselves when we try to retire
the out-of-sequence requests.
As such we need to hold onto the effective engine->kernel_context mutex
lock (via the engine pm mutex proxy) until we have finish queuing the
request to the engine.
v2: Serialise against concurrent intel_gt_retire_requests()
v3: Describe the hairy locking scheme with intel_gt_retire_requests()
for future reference.
v4: Combine timeline->lock and engine pm release; it's hairy.
Fixes:
a79ca656b648 ("drm/i915: Push the wakeref->count deferral to the backend")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120165514.3955081-2-chris@chris-wilson.co.uk
(cherry picked from commit
5cba288466e9b229feb68295675246e7522fb5eb)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 20 Nov 2019 16:55:13 +0000 (16:55 +0000)]
drm/i915/gt: Close race between engine_park and intel_gt_retire_requests
The general concept was that intel_timeline.active_count was locked by
the intel_timeline.mutex. The exception was for power management, where
the engine->kernel_context->timeline could be manipulated under the
global wakeref.mutex.
This was quite solid, as we always manipulated the timeline only while
we held an engine wakeref.
And then we started retiring requests outside of struct_mutex, only
using the timelines.active_list and the timeline->mutex. There we
started manipulating intel_timeline.active_count outside of an engine
wakeref, and so introduced a race between __engine_park() and
intel_gt_retire_requests(), a race that could result in the
engine->kernel_context not being added to the active timelines and so
losing requests, which caused us to keep the system permanently powered
up [and unloadable].
The race would be easy to close if we could take the engine wakeref for
the timeline before we retire -- except timelines are not bound to any
engine and so we would need to keep all active engines awake. The
alternative is to guard intel_timeline_enter/intel_timeline_exit for use
outside of the timeline->mutex.
Fixes:
e5dadff4b093 ("drm/i915: Protect request retirement with timeline->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120165514.3955081-1-chris@chris-wilson.co.uk
(cherry picked from commit
a6edbca74b305adc165e67065d7ee766006e6a48)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 20 Nov 2019 12:54:33 +0000 (12:54 +0000)]
drm/i915: Mark up the calling context for intel_wakeref_put()
Previously, we assumed we could use mutex_trylock() within an atomic
context, falling back to a worker if contended. However, such trickery
is illegal inside interrupt context, and so we need to always use a
worker under such circumstances. As we normally are in process context,
we can typically use a plain mutex, and only defer to a work when we
know we are being called from an interrupt path.
Fixes:
51fbd8de87dc ("drm/i915/pmu: Atomically acquire the gt_pm wakeref")
References:
a0855d24fc22d ("locking/mutex: Complain upon mutex API misuse in IRQ contexts")
References: https://bugs.freedesktop.org/show_bug.cgi?id=111626
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120125433.3767149-1-chris@chris-wilson.co.uk
(cherry picked from commit
07779a76ee1f93f930cf697b22be73d16e14f50c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Mon, 18 Nov 2019 23:02:46 +0000 (23:02 +0000)]
drm/i915: Wait until the intel_wakeref idle callback is complete
When waiting for idle, serialise with any ongoing callback so that it
will have completed before completing the wait.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118230254.2615942-12-chris@chris-wilson.co.uk
(cherry picked from commit
f4ba0707c825d60f1d0f5ce7bd3d875e68f3e204)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 20 Nov 2019 18:22:09 +0000 (18:22 +0000)]
drm/i915/gt: Fixup config ifdeffery for pm_suspend_target_state
pm_suspend_target_state is declared under CONFIG_PM_SLEEP but only
defined under CONFIG_SUSPEND. Play safe and only use the symbol if it is
both declared and defined.
Reported-by: kbuild-all@lists.01.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes:
a70a9e998e8e ("drm/i915: Defer rc6 shutdown to suspend_late")
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120182209.3967833-1-chris@chris-wilson.co.uk
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Tvrtko Ursulin [Fri, 22 Nov 2019 10:41:15 +0000 (10:41 +0000)]
drm/i915/query: Align flavour of engine data lookup
Commit
750e76b4f9f6 ("drm/i915/gt: Move the [class][inst] lookup for
engines onto the GT") changed the engine query to iterate over uabi
engines but left the buffer size calculation look at the physical engine
count. Difference has no practical consequence but it is nicer to align
both queries.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes:
750e76b4f9f6 ("drm/i915/gt: Move the [class][inst] lookup for engines onto the GT")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191122104115.29610-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit
9acc99d8f278e3da398e927774431bd3e947ab2e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Matt Roper [Mon, 18 Nov 2019 18:02:19 +0000 (10:02 -0800)]
drm/i915/tgl: Add DKL PHY vswing table for HDMI
The bspec initially provided a single DKL PHY vswing table for both HDMI
and DP, but was recently updated to include an independent table for
HDMI.
Bspec: 49292
Fixes:
978c3e539be2 ("drm/i915/tgl: Add dkl phy programming sequences")
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118180219.9309-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit
362bfb995b78394aefe61f7cc0511ef7c50bb11e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Matt Roper [Mon, 18 Nov 2019 16:44:12 +0000 (08:44 -0800)]
drm/i915/ehl: Update voltage level checks
The bspec was recently updated with new cdclk -> voltage level tables to
accommodate the new 324/326.4 cdclk values.
Bspec: 21809
Fixes:
63c9dae71dc5 ("drm/i915/ehl: Add voltage level requirement table")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118164412.26216-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit
d147483884ed08ee6bb618ef610ee0329a27fda7)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Thu, 21 Nov 2019 07:10:40 +0000 (07:10 +0000)]
Revert "drm/i915/gt: Wait for new requests in intel_gt_retire_requests()"
From inside an active timeline in the execbuf ioctl, we may try to
reclaim some space in the GGTT. We need GGTT space for all objects on
!full-ppgtt platforms, and for context images everywhere. However, to
free up space in the GGTT we may need to remove some pinned objects
(e.g. context images) that require flushing the idle barriers to remove.
For this we use the big hammer of intel_gt_wait_for_idle()
However, commit
7936a22dd466 ("drm/i915/gt: Wait for new requests in
intel_gt_retire_requests()") will continue spinning on the wait if a
timeline is active but lacks requests, as is the case during execbuf
reservation. Spinning forever is quite time consuming, so revert that
commit and start again.
In practice, the effect commit
7936a22dd466 was trying to achieve is
accomplished by commit
1683d24c1470 ("drm/i915/gt: Move new timelines
to the end of active_list"), so there is no immediate rush to replace
the looping.
Testcase: igt/gem_exec_reloc/basic-range
Fixes:
a46bfdc83fee ("drm/i915/gt: Wait for new requests in intel_gt_retire_requests()")
References:
1683d24c1470 ("drm/i915/gt: Move new timelines to the end of active_list")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191121071044.97798-1-chris@chris-wilson.co.uk
(cherry picked from commit
689122dcc36e08f53732adf7ae0246f62eff3eb6)
[Joonas: Corrected Fixes: tag ref to match drm-intel-next-fixes]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Joonas Lahtinen [Wed, 20 Nov 2019 11:21:38 +0000 (13:21 +0200)]
Merge tag 'gvt-next-fixes-2019-11-12' of https://github.com/intel/gvt-linux into drm-intel-next-fixes
gvt-next-fixes-2019-11-12
- Remove PVINFO read for initial state (Tina)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112062032.GO4196@zhen-hp.sh.intel.com
Chris Wilson [Thu, 14 Nov 2019 17:25:35 +0000 (17:25 +0000)]
drm/i915: Split i915_active.mutex into an irq-safe spinlock for the rbtree
As we want to be able to run inside atomic context for retiring the
i915_active, and we are no longer allowed to abuse mutex_trylock, split
the tree management portion of i915_active.mutex into an irq-safe
spinlock.
References:
a0855d24fc22d ("locking/mutex: Complain upon mutex API misuse in IRQ contexts")
References: https://bugs.freedesktop.org/show_bug.cgi?id=111626
Fixes:
274cbf20fd10 ("drm/i915: Push the i915_active.retire into a worker")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114172535.1116-1-chris@chris-wilson.co.uk
(cherry picked from commit
c9ad602feabe4271d2adf1bdae5d8b20c2dc84f1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Jani Nikula [Fri, 15 Nov 2019 12:04:40 +0000 (14:04 +0200)]
drm/i915: fix accidental static variable use
It's supposed to be just a const pointer.
Fixes:
074c77e3ec63 ("drm/i915/tgl: Gen-12 display loses Yf tiling and legacy CCS support")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115120440.17883-1-jani.nikula@intel.com
(cherry picked from commit
48ea97fabe75c83adf4e6ff9262bbda229e6ee73)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Don Hiatt [Fri, 15 Nov 2019 23:15:38 +0000 (15:15 -0800)]
drm/i915/guc: Skip suspend/resume GuC action on platforms w/o GuC submission
On some platforms (e.g. KBL) that do not support GuC submission, but
the user enabled the GuC communication (e.g for HuC authentication)
calling the GuC EXIT_S_STATE action results in lose of ability to
enter RC6. We can remove the GuC suspend/resume entirely as we do
not need to save the GuC submission status.
Add intel_guc_submission_is_enabled() function to determine if
GuC submission is active.
v2: Do not suspend/resume the GuC on platforms that do not support
Guc Submission.
v3: Fix typo, move suspend logic to remove goto.
v4: Use intel_guc_submission_is_enabled() to check GuC submission
status.
v5: No need to look at engine to determine if submission is enabled.
Squash fix + intel_guc_submission_is_enabled() patch into one.
v6: Move resume check into intel_guc_resume() for symmetry.
Fix commit Fixes tag.
Reported-by: KiteStramuort <kitestramuort@autistici.org>
Reported-by: S. Zharkoff <s.zharkoff@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111594
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111623
Fixes:
ffd5ce22faa4 ("drm/i915/guc: Updates for GuC 32.0.3 firmware")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceralo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Tomas Janousek <tomi@nomi.cz>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115231538.1249-1-don.hiatt@intel.com
(cherry picked from commit
82e0c5bbd6eb1d274b5a3e519ff0ab91f1f8e537)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Thu, 14 Nov 2019 22:57:32 +0000 (22:57 +0000)]
drm/i915/gt: Wait for new requests in intel_gt_retire_requests()
Our callers fall into two categories, those passing timeout=0 who just
want to flush request retirements and those passing a timeout that need
to wait for submission completion (e.g. intel_gt_wait_for_idle()).
Currently, we only wait for a snapshot of timelines at the start of the
wait (but there was an expectation that new requests would cause timelines
to appear at the end). However, our callers, such as
intel_gt_wait_for_idle() before suspend, do require us to wait for the
power management requests emitted by retirement as well. If we don't,
then it takes an extra second or two for the background worker to flush
the queue and mark the GT as idle.
Fixes:
7e8057626640 ("drm/i915: Drop struct_mutex from around i915_retire_requests()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114225736.616885-1-chris@chris-wilson.co.uk
(cherry picked from commit
7936a22dd4660d24b4ca0668c02b0372127cab44)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Imre Deak [Thu, 14 Nov 2019 15:26:21 +0000 (17:26 +0200)]
drm/i915: Restore GT coarse power gating workaround
The workaround to disable coarse power gating is still needed on SKL
GT3/GT4 machines and since the RC6 context corruption was discovered by
the hardware team also on all GEN9 machines. Restore applying the
workaround.
Fixes:
c113236718e8 ("drm/i915: Extract GT render sleep (rc6) management")
Testcase: igt/intel_gt_pm_late_selftests/live_rc6_ctx
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114152621.7235-1-imre.deak@intel.com
(cherry picked from commit
980f87a2edb3e7825949ebd0a7e63ab574c20816)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 13 Nov 2019 18:06:33 +0000 (18:06 +0000)]
drm/i915/fbdev: Restore physical addresses for fb_mmap()
fbdev uses the physical address of our framebuffer for its fb_mmap()
routine. While we need to adapt this address for the new io BAR, we have
to fix v5.4 first! The simplest fix is to restore the smem back to v5.3
and we will then probably have to implement our fbops->fb_mmap() callback
to handle local memory.
Reported-by: Neil MacLeod <freedesktop@nmacleod.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112256
Fixes:
5f889b9a61dd ("drm/i915: Disregard drm_mode_config.fb_base")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Neil MacLeod <freedesktop@nmacleod.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113180633.3947-1-chris@chris-wilson.co.uk
(cherry picked from commit
abc5520704ab438099fe352636b30b05c1253bea)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Lionel Landwerlin [Wed, 13 Nov 2019 15:46:39 +0000 (17:46 +0200)]
drm/i915/perf: don't forget noa wait after oa config
I'm observing incoherence metric values, changing from run to run.
It appears the patches introducing noa wait & reconfiguration from
command stream switched places in the series multiple times during the
review. This lead to the dependency of one onto the order to go
missing...
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes:
15d0ace1f876 ("drm/i915/perf: execute OA configuration from command stream")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113154639.27144-1-lionel.g.landwerlin@intel.com
(cherry picked from commit
93937659dc644f708def8fa58cb63c5c9f499f26)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Bruce Chang [Wed, 13 Nov 2019 23:11:04 +0000 (15:11 -0800)]
drm/i915: Avoid atomic context for error capture
io_mapping_map_atomic/kmap_atomic are occasionally taken in error capture
(if there is no aperture preallocated for the use of error capture), but
the error capture and compression routines are now run in normal
context:
<3> [113.316247] BUG: sleeping function called from invalid context at mm/page_alloc.c:4653
<3> [113.318190] in_atomic(): 1, irqs_disabled(): 0, pid: 678, name: debugfs_test
<4> [113.319900] no locks held by debugfs_test/678.
<3> [113.321002] Preemption disabled at:
<4> [113.321130] [<
ffffffffa02506d4>] i915_error_object_create+0x494/0x610 [i915]
<4> [113.327259] Call Trace:
<4> [113.327871] dump_stack+0x67/0x9b
<4> [113.328683] ___might_sleep+0x167/0x250
<4> [113.329618] __alloc_pages_nodemask+0x26b/0x1110
<4> [113.334614] pool_alloc.constprop.19+0x14/0x60 [i915]
<4> [113.335951] compress_page+0x7c/0x100 [i915]
<4> [113.337110] i915_error_object_create+0x4bd/0x610 [i915]
<4> [113.338515] i915_capture_gpu_state+0x384/0x1680 [i915]
However, it is not a good idea to run the slow compression inside atomic
context, so we choose not to.
Fixes:
895d8ebeaa924 ("drm/i915: error capture with no ggtt slot")
Signed-off-by: Bruce Chang <yu.bruce.chang@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113231104.24208-1-yu.bruce.chang@intel.com
(cherry picked from commit
48715f7001742e0d1cb20cffab1a0d75f5f7ad72)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
José Roberto de Souza [Thu, 7 Nov 2019 21:45:57 +0000 (13:45 -0800)]
drm/i915/display: Fix TRANS_DDI_MST_TRANSPORT_SELECT definition
TRANS_DDI_MST_TRANSPORT_SELECT is 2 bits wide not 3, it was taking
one bit from EDP/DSI Input Select.
Fixes:
b3545e086877 ("drm/i915/tgl: add support to one DP-MST stream")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107214559.77087-1-jose.souza@intel.com
(cherry picked from commit
bb747fa5a9cbf561e5a30649f360feb9e6855645)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Imre Deak [Tue, 12 Nov 2019 10:46:08 +0000 (12:46 +0200)]
drm/i915: Fix detection for a CMP-V PCH
According to internal documents I found for CMP PCHs the PCI ID 0xA3C1
belongs to a CMP-V chipset. Based on the same docs the programming of
the PCH is compatible with that of KBP. Fix up my previous wrong
assumption accordingly using the SPT programming which in turn is the
basis for KBP.
The original bug reporter verified that this is the correct PCH
identification (the only way we'll program valid DDC pin-pair values to
the GMBUS register) and the Windows team uses the same identification
(that is using the KBP programming model for this PCH).
I filed the necessary Bspec update requests (BSpec/33734).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112051
Fixes:
37c92dc303dd ("drm/i915: Add new CNL PCH ID seen on a CML platform")
Reported-and-tested-by: Cyrus <cyrus.lien@canonical.com>
Cc: Cyrus <cyrus.lien@canonical.com>
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112104608.24587-1-imre.deak@intel.com
(cherry picked from commit
50a5065f4474c2dbc1f7462b45a32d33d7b48d88)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Tue, 12 Nov 2019 15:00:51 +0000 (15:00 +0000)]
drm/i915: Flush context free work on cleanup
Throw in a flush_work() to specifically flush the context cleanup work
before the module is unloaded.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112248
Fixes:
a4e7ccdac38e ("drm/i915: Move context management under GEM")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112150051.1603-1-chris@chris-wilson.co.uk
(cherry picked from commit
5f00cac921b1219bc9daf00d169385b4cb3916ce)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Dave Airlie [Fri, 15 Nov 2019 02:34:39 +0000 (12:34 +1000)]
Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next
Two minor cleanups / fixes for -next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: =?UTF-8?q?Thomas=20Hellstr=C3=B6m=20=28VMware=29?=
Link: https://patchwork.freedesktop.org/patch/msgid/20191114131703.8607-1-thomas_os@shipmail.org
Dave Airlie [Fri, 15 Nov 2019 02:16:43 +0000 (12:16 +1000)]
Merge tag 'drm-intel-next-fixes-2019-11-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- PMU "Frequency" is reported as accumulated cycles
- Avoid OOPS in dumb_create IOCTL when no CRTCs
- Mitigation for userptr put_pages deadlock with trylock_page
- Fix to avoid freeing heartbeat request too early
- Fix LRC coherency issue
- Fix Bugzilla #112212: Avoid screen corruption on MST
- Error path fix to unlock context on failed context VM SETPARAM
- Always consider holding preemption a privileged op in perf/OA
- Preload LUTs if the hw isn't currently using them to avoid color flash on VLV/CHV
- Protect context while grabbing its name for the request
- Don't resize aliasing ppGTT size
- Smaller fixes picked by tooling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114085213.GA6440@jlahtine-desk.ger.corp.intel.com
YueHaibing [Fri, 1 Nov 2019 13:46:11 +0000 (21:46 +0800)]
drm/vmwgfx: remove set but not used variable 'srf'
drivers/gpu/drm/vmwgfx/vmwgfx_surface.c:339:22:
warning: variable srf set but not used [-Wunused-but-set-variable]
'srf' is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Thomas Hellstrom [Wed, 13 Nov 2019 18:02:42 +0000 (19:02 +0100)]
drm/ttm, drm/vmwgfx: Use a configuration option for the TTM dma page pool
Drivers like vmwgfx may want to test whether the dma page pool is present
or not. Since it's activated by default by TTM if compiled-in, define a
hidden configuration option that the driver can test for.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Dave Airlie [Thu, 14 Nov 2019 01:06:01 +0000 (11:06 +1000)]
Backmerge i915 security patches from commit '
ea0b163b13ff' into drm-next
This backmerges the branch that ended up in Linus' tree. It removes
all the changes for the rc6 patches from Linus' tree in favour of
a patch that is based on a large refactor that occured.
Otherwise it all looks good.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Imre Deak [Thu, 17 Oct 2019 13:38:31 +0000 (16:38 +0300)]
drm/i915/gen8+: Add RC6 CTX corruption WA
In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.
v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
change.
v5:
- Rebased on latest upstream gt_pm refactoring.
v6:
- s/i915_rc6_/intel_rc6_/
- Don't return a value from i915_rc6_ctx_wa_check().
v7:
- Rebased on latest gt rc6 refactoring.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
[airlied: pull this later version of this patch into drm-next
to make resolving the conflict mess easier.]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 13 Nov 2019 23:28:30 +0000 (09:28 +1000)]
Merge tag 'arcpgu-updates-2019.07.18' of github.com:abrodkin/linux into drm-next
This is a pretty simple improvement that allows to find encoder
as the one and only (ARC PGU doesn't support more than one) endpoint
instead of using non-standard "encoder-slave" property.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CY4PR1201MB0120FDB10A777345F9C27720A1C90@CY4PR1201MB0120.namprd12.prod.outlook.com
Dave Airlie [Wed, 13 Nov 2019 22:51:02 +0000 (08:51 +1000)]
Merge tag 'drm-misc-next-fixes-2019-11-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
- Fix memory leak in gpu debugfs node's release (Johan)
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113211056.GA78440@art_vandelay
Dave Airlie [Wed, 13 Nov 2019 22:43:06 +0000 (08:43 +1000)]
Merge tag 'drm-next-5.5-2019-11-08' of git://people.freedesktop.org/~agd5f/linux into drm-next
drm-next-5.5-2019-11-08:
amdgpu:
- Enable VCN dynamic powergating on RV/RV2
- Fixes for Navi14
- Misc Navi fixes
- Fix MSI-X tear down
- Misc Arturus fixes
- Fix xgmi powerstate handling
- Documenation fixes
scheduler:
- Fix static code checker warning
- Fix possible thread reactivation while thread is stopped
- Avoid cleanup if thread is parked
radeon:
- SI dpm fix ported from amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191108212713.5078-1-alexander.deucher@amd.com
Johan Hovold [Thu, 10 Oct 2019 13:13:30 +0000 (15:13 +0200)]
drm/msm: fix memleak on release
If a process is interrupted while accessing the "gpu" debugfs file and
the drm device struct_mutex is contended, release() could return early
and fail to free related resources.
Note that the return value from release() is ignored.
Fixes:
4f776f4511c7 ("drm/msm/gpu: Convert the GPU show function to use the GPU state")
Cc: stable <stable@vger.kernel.org> # 4.18
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010131333.23635-2-johan@kernel.org
Dave Airlie [Wed, 13 Nov 2019 19:53:10 +0000 (05:53 +1000)]
Merge v5.4-rc7 into drm-next
We have the i915 security fixes to backmerge, but first
let's clear the decks for other drivers to avoid a bigger
mess.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Gwan-gyeong Mun [Wed, 13 Nov 2019 12:52:41 +0000 (14:52 +0200)]
drm/i915: Split a setting of MSA to MST and SST
The setting of MSA is done by the DDI .pre_enable() hook. And when we are
using MST, the MSA is only set to first mst stream by calling of
DDI .pre_eanble() hook. It raies issues to non-first mst streams.
Wrong MSA or missed MSA packets might show scrambled screen or wrong
screen.
This splits a setting of MSA to MST and SST cases. And In the MST case it
will call a setting of MSA after an allocating of Virtual Channel from
MST encoder pre_enable callback.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112212
Fixes:
0c06fa156006 ("drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA")
Fixes:
d4a415dcda35 ("drm/i915: Fix MST oops due to MSA changes")
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106212636.502471-1-gwan-gyeong.mun@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
[vsyrjala: nuke spurious newline]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit
bd8c9cca88765caee0dfa93967c6d8f16b4cbfb9)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113125241.20547-1-ville.syrjala@linux.intel.com
Chris Wilson [Mon, 11 Nov 2019 13:32:05 +0000 (13:32 +0000)]
drm/i915/execlists: Move reset_active() from schedule-out to schedule-in
The gem_ctx_persistence/smoketest was detecting an odd coherency issue
inside the LRC context image; that the address of the ring buffer did
not match our associated struct intel_ring. As we set the address into
the context image when we pin the ring buffer into place before the
context is active, that leaves the question of where did it get
overwritten. Either the HW context save occurred after our pin which
would imply that our idle barriers are broken, or we overwrote the
context image ourselves. It is only in reset_active() where we dabble
inside the context image outside of a serialised path from schedule-out;
but we could equally perform the operation inside schedule-in which is
then fully serialised with the context pin -- and remains serialised by
the engine pulse with kill_context(). (The only downside, aside from
doing more work inside the engine->active.lock, was the plan to merge
all the reset paths into doing their context scrubbing on schedule-out
needs more thought.)
Fixes:
d12acee84ffb ("drm/i915/execlists: Cancel banned contexts on schedule-out")
Testcase: igt/gem_ctx_persistence/smoketest
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-3-chris@chris-wilson.co.uk
(cherry picked from commit
31b61f0ef9af62b6404d8df5dcd2cf58f80c9f53)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Mon, 11 Nov 2019 13:32:03 +0000 (13:32 +0000)]
drm/i915/userptr: Try to acquire the page lock around set_page_dirty()
set_page_dirty says:
For pages with a mapping this should be done under the page lock
for the benefit of asynchronous memory errors who prefer a
consistent dirty state. This rule can be broken in some special
cases, but should be better not to.
Under those rules, it is only safe for us to use the plain set_page_dirty
calls for shmemfs/anonymous memory. Userptr may be used with real
mappings and so needs to use the locked version (set_page_dirty_lock).
However, following a try_to_unmap() we may want to remove the userptr and
so call put_pages(). However, try_to_unmap() acquires the page lock and
so we must avoid recursively locking the pages ourselves -- which means
that we cannot safely acquire the lock around set_page_dirty(). Since we
can't be sure of the lock, we have to risk skip dirtying the page, or
else risk calling set_page_dirty() without a lock and so risk fs
corruption.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012
Fixes:
5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
References:
cb6d7c7dc7ff ("drm/i915/userptr: Acquire the page lock around set_page_dirty()")
References:
505a8ec7e11a ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"")
References:
6dcc693bc57f ("ext4: warn when page is dirtied without buffers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk
(cherry picked from commit
0d4bbe3d407f79438dc4f87943db21f7134cfc65)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Sat, 9 Nov 2019 10:53:56 +0000 (10:53 +0000)]
drm/i915/pmu: "Frequency" is reported as accumulated cycles
We report "frequencies" (actual-frequency, requested-frequency) as the
number of accumulated cycles so that the average frequency over that
period may be determined by the user. This means the units we report to
the user are Mcycles (or just M), not MHz.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191109105356.5273-1-chris@chris-wilson.co.uk
(cherry picked from commit
e88866ef02851c88fe95a4bb97820b94b4d46f36)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Mon, 11 Nov 2019 11:43:19 +0000 (11:43 +0000)]
drm/i915: Protect context while grabbing its name for the request
Inside print_request(), we query the context/timeline name. Nothing
immediately protects the context from being freed if the request is
complete -- we rely on serialisation by the caller to keep the name
valid until they finish using it. Inside intel_engine_dump(), we
generally only print the requests in the execution queue protected by the
engine->active.lock, but we also show the pending execlists ports which
are not protected and so require a rcu_read_lock to keep the pointer
valid.
[ 1695.700883] BUG: KASAN: use-after-free in i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.700981] Read of size 8 at addr
ffff8887344f4d50 by task gem_ctx_persist/2968
[ 1695.701068]
[ 1695.701156] CPU: 1 PID: 2968 Comm: gem_ctx_persist Tainted: G U 5.4.0-rc6+ #331
[ 1695.701246] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[ 1695.701334] Call Trace:
[ 1695.701424] dump_stack+0x5b/0x90
[ 1695.701870] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.701964] print_address_description.constprop.7+0x36/0x50
[ 1695.702408] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702856] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702947] __kasan_report.cold.10+0x1a/0x3a
[ 1695.703390] ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.703836] i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.704241] print_request+0x82/0x2e0 [i915]
[ 1695.704638] ? fwtable_read32+0x133/0x360 [i915]
[ 1695.705042] ? write_timestamp+0x110/0x110 [i915]
[ 1695.705133] ? _raw_spin_lock_irqsave+0x79/0xc0
[ 1695.705221] ? refcount_inc_not_zero_checked+0x91/0x110
[ 1695.705306] ? refcount_dec_and_mutex_lock+0x50/0x50
[ 1695.705709] ? intel_engine_find_active_request+0x202/0x230 [i915]
[ 1695.706115] intel_engine_dump+0x2c9/0x900 [i915]
Fixes:
c36eebd9ba5d ("drm/i915/gt: execlists->active is serialised by the tasklet")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-1-chris@chris-wilson.co.uk
(cherry picked from commit
fecffa4668cf62e679aeea8caa9d0f241f822578)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Lionel Landwerlin [Mon, 11 Nov 2019 09:53:08 +0000 (11:53 +0200)]
drm/i915/perf: always consider holding preemption a privileged op
The ordering of the checks in the existing code can lead to holding
preemption not being considered as privileged op.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes:
9cd20ef7803c ("drm/i915/perf: allow holding preemption on filtered ctx")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111095308.2550-1-lionel.g.landwerlin@intel.com
(cherry picked from commit
0b0120d4c7b013eba59b33254febc0a6e4049e13)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Ben Hutchings [Mon, 11 Nov 2019 16:13:24 +0000 (08:13 -0800)]
drm/i915/cmdparser: Fix jump whitelist clearing
When a jump_whitelist bitmap is reused, it needs to be cleared.
Currently this is done with memset() and the size calculation assumes
bitmaps are made of 32-bit words, not longs. So on 64-bit
architectures, only the first half of the bitmap is cleared.
If some whitelist bits are carried over between successive batches
submitted on the same context, this will presumably allow embedding
the rogue instructions that we're trying to reject.
Use bitmap_zero() instead, which gets the calculation right.
Fixes:
f8c08d8faee5 ("drm/i915/cmdparser: Add support for backward jumps")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Ville Syrjälä [Wed, 30 Oct 2019 19:08:15 +0000 (21:08 +0200)]
drm/i915: Preload LUTs if the hw isn't currently using them
The LUTs are single buffered so in order to program them without
tearing we'd have to do it during vblank (actually to be 100%
effective it has to happen between start of vblank and frame start).
We have no proper mechanism for that at the moment so we just
defer loading them after the vblank waits have happened. That
is not quite sufficient (especially when committing multiple pipes
whose vblanks don't line up) so the LUT load will often leak into
the following frame causing tearing.
However in case the hardware wasn't previously using the LUT we
can preload it before setting the enable bit (which is double
buffered so won't tear). Let's determine if we can do such
preloading and make it happen. Slight variation between the
hardware requires some platforms specifics in the checks.
Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win
and Asus T100HA) when the gamma LUT gets loaded for the first
time as the BIOS has left some junk in the LUT memory.
v2: Deal with uapi vs. hw crtc state split
s/GCM/CGM/ typo fix
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes:
051a6d8d3ca0 ("drm/i915: Move LUT programming to happen after vblank waits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030190815.7359-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit
0ccc42a2fd5107a7f58e62c8b35b61de9a70ce82)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Ville Syrjälä [Wed, 6 Nov 2019 17:23:49 +0000 (19:23 +0200)]
drm/i915: Don't oops in dumb_create ioctl if we have no crtcs
Make sure we have a crtc before probing its primary plane's
max stride. Initially I thought we can't get this far without
crtcs, but looks like we can via the dumb_create ioctl.
Not sure if we shouldn't disable dumb buffer support entirely
when we have no crtcs, but that would require some amount of work
as the only thing currently being checked is dev->driver->dumb_create
which we'd have to convert to some device specific dynamic thing.
Cc: stable@vger.kernel.org
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes:
aa5ca8b7421c ("drm/i915: Align dumb buffer stride to 4k to allow for gtt remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106172349.11987-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit
baea9ffe64200033499a4955f431e315bb807899)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 6 Nov 2019 22:12:23 +0000 (22:12 +0000)]
drm/i915: Leave the aliasing-ppgtt size alone
The hidden aliasing-ppgtt's size is never revealed, as we only inspect
the front GTT when engaged. However, we were "fixing" the hidden ppgtt
to match, with the net result that we ended up leaking the unused
portion on Braswell were we preallocated the entire set of top level
PDP, see gen8_preallocate_top_level_pdp().
[ 26.025364] DMA-API: pci 0000:00:02.0: device driver has pending DMA allocations while released from device [count=2]
[ 26.025364] One of leaked entries details: [device address=0x0000000230778000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as single]
[ 26.025683] WARNING: CPU: 0 PID: 415 at kernel/dma/debug.c:894 dma_debug_device_change+0x1a4/0x1f0
[ 26.025905] Modules linked in: i915(E-) intel_powerclamp(E) nls_ascii(E) nls_cp437(E) crct10dif_pclmul(E) crc32_pclmul(E) vfat(E) crc32c_intel(E) fat(E) ghash_clmulni_intel(E) prime_numbers(E) intel_gtt(E) i2c_algo_bit(E) efi_pstore(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) evdev(E) drm(E) aesni_intel(E) glue_helper(E) crypto_simd(E) cryptd(E) intel_cstate(E) sg(E) efivars(E) pcspkr(E) video(E) button(E) efivarfs(E) ip_tables(E) x_tables(E) autofs4(E) sd_mod(E) lpc_ich(E) ahci(E) mfd_core(E) i2c_i801(E) libahci(E) i2c_designware_pci(E) i2c_designware_core(E)
[ 26.026613] CPU: 0 PID: 415 Comm: rmmod Tainted: G E 5.4.0-rc6+ #25
[ 26.026837] Hardware name: /, BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[ 26.027080] RIP: 0010:dma_debug_device_change+0x1a4/0x1f0
[ 26.027319] Code: 89 54 24 08 e8 ad 60 62 00 48 8b 54 24 08 48 89 c6 41 57 4d 89 e9 49 89 d8 44 89 f1 41 54 48 c7 c7 e0 61 06 82 e8 c1 aa f5 ff <0f> 0b 5a 59 48 83 3c 24 00 0f 85 97 26 00 00 8b 05 77 47 92 01 85
[ 26.027600] RSP: 0018:
ffff888228d2fcc8 EFLAGS:
00010282
[ 26.027831] RAX:
0000000000000000 RBX:
0000000230778000 RCX:
0000000000000000
[ 26.028053] RDX:
0000000000000001 RSI:
0000000000000008 RDI:
ffffed10451a5f8f
[ 26.028279] RBP:
ffff88823480c0b0 R08:
0000000000000001 R09:
ffffed1046e83eb1
[ 26.028500] R10:
ffffed1046e83eb0 R11:
ffff88823741f587 R12:
ffffffff82067340
[ 26.028725] R13:
0000000000001000 R14:
0000000000000002 R15:
ffffffff82067480
[ 26.028952] FS:
00007fdf3ed174c0(0000) GS:
ffff888237400000(0000) knlGS:
0000000000000000
[ 26.029185] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 26.029405] CR2:
000055e211109030 CR3:
0000000230139000 CR4:
00000000001006f0
[ 26.029622] Call Trace:
[ 26.029846] notifier_call_chain+0x67/0xa0
[ 26.030076] blocking_notifier_call_chain+0x5a/0x80
[ 26.030305] device_release_driver_internal+0x20d/0x260
[ 26.030535] driver_detach+0x7b/0xe1
[ 26.030761] bus_remove_driver+0x8c/0x153
[ 26.030993] pci_unregister_driver+0x2d/0xf0
[ 26.032603] i915_exit+0x16/0x1c [i915]
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes:
1eda701eace2 ("drm/i915/gtt: Recursive cleanup for gen8")
References:
c082afac86cb ("drm/i915: Move aliasing_ppgtt underneath its i915_ggtt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106221223.7437-1-chris@chris-wilson.co.uk
(cherry picked from commit
2b0a4fc25ad8e3da4a156995a513dca6abf247de)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Jani Nikula [Tue, 29 Oct 2019 10:39:47 +0000 (12:39 +0200)]
drm/i915/display: only include intel_dp_link_training.h where needed
The intel_dp_link_training.h include has no need or place in
intel_display.h. Include it in intel_display.c instead.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes:
eadf6f9170d5 ("drm/i915/display/icl: Enable master-slaves in trans port sync")
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029103947.7535-1-jani.nikula@intel.com
(cherry picked from commit
3c954c418eb363343ff515756e440aa1dc216e0b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 6 Nov 2019 14:41:55 +0000 (14:41 +0000)]
drm/i915/gem: Fix error path to unlock if the GEM context is closed
When inside the lock, remember to unlock even if you want to leave
early.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
a4e7ccdac38e ("drm/i915: Move context management under GEM")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106144155.25727-1-chris@chris-wilson.co.uk
(cherry picked from commit
feba2b8146633390f8df44946eceb4274f7377ed)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 6 Nov 2019 13:31:29 +0000 (13:31 +0000)]
drm/i915/gt: Only drop heartbeat.systole if the sole owner
Mika spotted that only using cancel_delayed_work() could mean that we
attempted to clear the heartbeat.systole while the worker was still
running. Rectify the situation by only touching the systole from outside
the worker if we suceeded in cancelling the worker before it could run.
The worker is expected to clean up by itself upon idling.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes:
058179e72e09 ("drm/i915/gt: Replace hangcheck by heartbeats")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106133129.17732-1-chris@chris-wilson.co.uk
(cherry picked from commit
841e86728615baa77b0ea9d8b357e66052c75fe5)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Linus Torvalds [Mon, 11 Nov 2019 00:17:15 +0000 (16:17 -0800)]
Linux 5.4-rc7
Linus Torvalds [Sun, 10 Nov 2019 21:41:59 +0000 (13:41 -0800)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A set of fixes that have trickled in over the last couple of weeks:
- MAINTAINER update for Cavium/Marvell ThunderX2
- stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for
CAN interfaces
- i.MX fixes for voltage regulator GPIO mappings, fixes voltage
scaling issues
- More i.MX fixes for various issues on i.MX eval boards: interrupt
storm due to u-boot leaving pins in new states, fixing power button
config, a couple of compatible-string corrections.
- Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets
- A few documentation tweaks and a fix of a memory leak in the reset
subsystem"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: update Cavium ThunderX2 maintainers
ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
arm64: dts: zii-ultra: fix ARM regulator GPIO handle
ARM: sunxi: Fix CPU powerdown on A83T
ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend
arm64: dts: imx8mn: fix compatible string for sdma
arm64: dts: imx8mm: fix compatible string for sdma
reset: fix reset_control_ops kerneldoc comment
ARM: dts: imx6-logicpd: Re-enable SNVS power key
soc: imx: gpc: fix initialiser format
ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts
arm64: dts: ls1028a: fix a compatible issue
reset: fix reset_control_get_exclusive kerneldoc comment
reset: fix reset_control_lookup kerneldoc comment
reset: fix of_reset_control_get_count kerneldoc comment
reset: fix of_reset_simple_xlate kerneldoc comment
reset: Fix memory leak in reset_control_array_put()
Linus Torvalds [Sun, 10 Nov 2019 21:29:12 +0000 (13:29 -0800)]
Merge tag 'staging-5.4-rc7' of git://git./linux/kernel/git/gregkh/staging
Pull IIO fixes and staging driver from Greg KH:
"Here is a mix of a number of IIO driver fixes for 5.4-rc7, and a whole
new staging driver.
The IIO fixes resolve some reported issues, all are tiny.
The staging driver addition is the vboxsf filesystem, which is the
VirtualBox guest shared folder code. Hans has been trying to get
filesystem reviewers to review the code for many months now, and
Christoph finally said to just merge it in staging now as it is
stand-alone and the filesystem people can review it easier over time
that way.
I know it's late for this big of an addition, but it is stand-alone.
The code has been in linux-next for a while, long enough to pick up a
few tiny fixes for it already so people are looking at it.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: Fix error return code in vboxsf_fill_super()
staging: vboxsf: fix dereference of pointer dentry before it is null checked
staging: vboxsf: Remove unused including <linux/version.h>
staging: Add VirtualBox guest shared folder (vboxsf) support
iio: adc: stm32-adc: fix stopping dma
iio: imu: inv_mpu6050: fix no data on MPU6050
iio: srf04: fix wrong limitation in distance measuring
iio: imu: adis16480: make sure provided frequency is positive
Linus Torvalds [Sun, 10 Nov 2019 21:14:48 +0000 (13:14 -0800)]
Merge tag 'char-misc-5.4-rc7' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of late-arrival driver fixes for issues reported for
some char/misc drivers for 5.4-rc7
These all come from the different subsystem/driver maintainers as
things that they had reports for and wanted to see fixed.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
intel_th: pci: Add Jasper Lake PCH support
intel_th: pci: Add Comet Lake PCH support
intel_th: msu: Fix possible memory leak in mode_store()
intel_th: msu: Fix overflow in shift of an unsigned int
intel_th: msu: Fix missing allocation failure check on a kstrndup
intel_th: msu: Fix an uninitialized mutex
intel_th: gth: Fix the window switching sequence
soundwire: slave: fix scanf format
soundwire: intel: fix intel_register_dai PDI offsets and numbers
interconnect: Add locking in icc_set_tag()
interconnect: qcom: Fix icc_onecell_data allocation
soundwire: depend on ACPI || OF
soundwire: depend on ACPI
thunderbolt: Drop unnecessary read when writing LC command in Ice Lake
thunderbolt: Fix lockdep circular locking depedency warning
thunderbolt: Read DP IN adapter first two dwords in one go
Linus Torvalds [Sun, 10 Nov 2019 20:59:34 +0000 (12:59 -0800)]
Merge tag 'configfs-for-5.4-2' of git://git.infradead.org/users/hch/configfs
Pull configfs regression fix from Christoph Hellwig:
"Fix a regression from this merge window in the configfs symlink
handling (Honggang Li)"
* tag 'configfs-for-5.4-2' of git://git.infradead.org/users/hch/configfs:
configfs: calculate the depth of parent item
Linus Torvalds [Sun, 10 Nov 2019 20:07:47 +0000 (12:07 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of fixes for x86:
- Make the tsc=reliable/nowatchdog command line parameter work again.
It was broken with the introduction of the early TSC clocksource.
- Prevent the evaluation of exception stacks before they are set up.
This causes a crash in dumpstack because the stack walk termination
gets screwed up.
- Prevent a NULL pointer dereference in the rescource control file
system.
- Avoid bogus warnings about APIC id mismatch related to the LDR
which can happen when the LDR is not in use and therefore not
initialized. Only evaluate that when the APIC is in logical
destination mode"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Respect tsc command line paraemeter for clocksource_tsc_early
x86/dumpstack/64: Don't evaluate exception stacks before setup
x86/apic/32: Avoid bogus LDR warnings
x86/resctrl: Prevent NULL pointer dereference when reading mondata
Linus Torvalds [Sun, 10 Nov 2019 20:03:58 +0000 (12:03 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for timekeepoing and clocksource drivers:
- VDSO data was updated conditional on the availability of a VDSO
capable clocksource. This causes the VDSO functions which do not
depend on a VDSO capable clocksource to operate on stale data.
Always update unconditionally.
- Prevent a double free in the mediatek driver
- Use the proper helper in the sh_mtu2 driver so it won't attempt to
initialize non-existing interrupts"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping/vsyscall: Update VDSO data unconditionally
clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name()
clocksource/drivers/mediatek: Fix error handling
Linus Torvalds [Sun, 10 Nov 2019 20:00:47 +0000 (12:00 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Two fixes for scheduler regressions:
- Plug a subtle race condition which was introduced with the rework
of the next task selection functionality. The change of task
properties became unprotected which can be observed inconsistently
causing state corruption.
- A trivial compile fix for CONFIG_CGROUPS=n"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix pick_next_task() vs 'change' pattern race
sched/core: Fix compilation error when cgroup not selected
Linus Torvalds [Sun, 10 Nov 2019 19:55:53 +0000 (11:55 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf tooling fixes from Thomas Gleixner:
- Fix the time sorting algorithm which was broken due to truncation of
big numbers
- Fix the python script generator fail caused by a broken tracepoint
array iterator
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix time sorting
perf tools: Remove unused trace_find_next_event()
perf scripting engines: Iterate on tep event arrays directly
Linus Torvalds [Sun, 10 Nov 2019 19:51:11 +0000 (11:51 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixlet from Thomas Gleixner:
"A trivial fix for a kernel doc regression where an argument change was
not reflected in the documentation"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentation
Linus Torvalds [Sun, 10 Nov 2019 19:47:39 +0000 (11:47 -0800)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull stacktrace fix from Thomas Gleixner:
"A small fix for a stacktrace regression.
Saving a stacktrace for a foreign task skipped an extra entry which
makes e.g. the output of /proc/$PID/stack incomplete"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stacktrace: Don't skip first entry on noncurrent tasks
Linus Torvalds [Sun, 10 Nov 2019 19:43:18 +0000 (11:43 -0800)]
Merge tag '5.4-rc7-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fix from Steve French:
"Small fix for an smb3 reconnect bug (also marked for stable)"
* tag '5.4-rc7-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: Fix persistent handles reconnect
Corentin Labbe [Sun, 10 Nov 2019 16:27:54 +0000 (16:27 +0000)]
lib: Remove select of inexistant GENERIC_IO
config option GENERIC_IO was removed but still selected by lib/kconfig
This patch finish the cleaning.
Fixes:
9de8da47742b ("kconfig: kill off GENERIC_IO option")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 10 Nov 2019 00:47:34 +0000 (16:47 -0800)]
Merge tag 'pinctrl-v5.4-3' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix glitch risks in the Intel GPIO
- Fix the Intel Cherryview valid irq mask calculation.
- Allocate the Intel Cherryview irqchip dynamically.
- Fix the valid mask init sequency on the ST STMFX driver.
* tag 'pinctrl-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: stmfx: fix valid_mask init sequence
pinctrl: cherryview: Allocate IRQ chip dynamic
pinctrl: cherryview: Fix irq_valid_mask calculation
pinctrl: intel: Avoid potential glitches if pin is in GPIO mode
Linus Torvalds [Sat, 9 Nov 2019 16:51:37 +0000 (08:51 -0800)]
Merge tag 'for-5.4-rc6-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few regressions and fixes for stable.
Regressions:
- fix a race leading to metadata space leak after task received a
signal
- un-deprecate 2 ioctls, marked as deprecated by mistake
Fixes:
- fix limit check for number of devices during chunk allocation
- fix a race due to double evaluation of i_size_read inside max()
macro, can cause a crash
- remove wrong device id check in tree-checker"
* tag 'for-5.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: un-deprecate ioctls START_SYNC and WAIT_SYNC
btrfs: save i_size to avoid double evaluation of i_size_read in compress_file_range
Btrfs: fix race leading to metadata space leak after task received signal
btrfs: tree-checker: Fix wrong check on max devid
btrfs: Consider system chunk array size for new SYSTEM chunks
Linus Torvalds [Sat, 9 Nov 2019 16:47:03 +0000 (08:47 -0800)]
Merge tag 'linux-watchdog-5.4-rc7' of git://linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
- cpwd: fix build regression
- pm8916_wdt: fix pretimeout registration flow
- meson: Fix the wrong value of left time
- imx_sc_wdt: Pretimeout should follow SCU firmware format
-
bd70528: Add MODULE_ALIAS to allow module auto loading
* tag 'linux-watchdog-5.4-rc7' of git://www.linux-watchdog.org/linux-watchdog:
watchdog:
bd70528: Add MODULE_ALIAS to allow module auto loading
watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware format
watchdog: meson: Fix the wrong value of left time
watchdog: pm8916_wdt: fix pretimeout registration flow
watchdog: cpwd: fix build regression
Linus Torvalds [Sat, 9 Nov 2019 02:21:05 +0000 (18:21 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) BPF sample build fixes from Björn Töpel
2) Fix powerpc bpf tail call implementation, from Eric Dumazet.
3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet.
4) Fix crash in ebtables when using dnat target, from Florian Westphal.
5) Fix port disable handling whne removing bcm_sf2 driver, from Florian
Fainelli.
6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski.
7) Various KCSAN fixes all over the networking, from Eric Dumazet.
8) Memory leaks in mlx5 driver, from Alex Vesker.
9) SMC interface refcounting fix, from Ursula Braun.
10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu.
11) Add a TX lock to synchonize the kTLS TX path properly with crypto
operations. From Jakub Kicinski.
12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano
Garzarella.
13) Infinite loop in Intel ice driver, from Colin Ian King.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
ixgbe: need_wakeup flag might not be set for Tx
i40e: need_wakeup flag might not be set for Tx
igb/igc: use ktime accessors for skb->tstamp
i40e: Fix for ethtool -m issue on X722 NIC
iavf: initialize ITRN registers with correct values
ice: fix potential infinite loop because loop counter being too small
qede: fix NULL pointer deref in __qede_remove()
net: fix data-race in neigh_event_send()
vsock/virtio: fix sock refcnt holding during the shutdown
net: ethernet: octeon_mgmt: Account for second possible VLAN header
mac80211: fix station inactive_time shortly after boot
net/fq_impl: Switch to kvmalloc() for memory allocation
mac80211: fix ieee80211_txq_setup_flows() failure path
ipv4: Fix table id reference in fib_sync_down_addr
ipv6: fixes rt6_probe() and fib6_nh->last_probe init
net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
net: usb: qmi_wwan: add support for DW5821e with eSIM support
CDC-NCM: handle incomplete transfer of MTU
nfc: netlink: fix double device reference drop
NFC: st21nfca: fix double free
...
Linus Torvalds [Sat, 9 Nov 2019 02:15:55 +0000 (18:15 -0800)]
Merge tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Two NVMe device removal crash fixes, and a compat fixup for for an
ioctl that was introduced in this release (Anton, Charles, Max - via
Keith)
- Missing error path mutex unlock for drbd (Dan)
- cgroup writeback fixup on dead memcg (Tejun)
- blkcg online stats print fix (Tejun)
* tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block:
cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead
block: drbd: remove a stray unlock in __drbd_send_protocol()
blkcg: make blkcg_print_stat() print stats only for online blkgs
nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme-rdma: fix a segmentation fault during module unload
David S. Miller [Sat, 9 Nov 2019 00:50:14 +0000 (16:50 -0800)]
Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2019-11-08
This series contains fixes to igb, igc, ixgbe, i40e, iavf and ice
drivers.
Colin Ian King fixes a potentially wrap-around counter in a for-loop.
Nick fixes the default ITR values for the iavf driver to 50 usecs
interval.
Arkadiusz fixes 'ethtool -m' for X722 devices where the correct value
cannot be obtained from the firmware, so add X722 to the check to ensure
the wrong value is not returned.
Jake fixes igb and igc drivers in their implementation of launch time
support by declaring skb->tstamp value as ktime_t instead of s64.
Magnus fixes ixgbe and i40e where the need_wakeup flag for transmit may
not be set for AF_XDP sockets that are only used to send packets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Magnus Karlsson [Fri, 8 Nov 2019 19:58:10 +0000 (20:58 +0100)]
ixgbe: need_wakeup flag might not be set for Tx
The need_wakeup flag for Tx might not be set for AF_XDP sockets that
are only used to send packets. This happens if there is at least one
outstanding packet that has not been completed by the hardware and we
get that corresponding completion (which will not generate an
interrupt since interrupts are disabled in the napi poll loop) between
the time we stopped processing the Tx completions and interrupts are
enabled again. In this case, the need_wakeup flag will have been
cleared at the end of the Tx completion processing as we believe we
will get an interrupt from the outstanding completion at a later point
in time. But if this completion interrupt occurs before interrupts
are enable, we lose it and should at that point really have set the
need_wakeup flag since there are no more outstanding completions that
can generate an interrupt to continue the processing. When this
happens, user space will see a Tx queue need_wakeup of 0 and skip
issuing a syscall, which means will never get into the Tx processing
again and we have a deadlock.
This patch introduces a quick fix for this issue by just setting the
need_wakeup flag for Tx to 1 all the time. I am working on a proper
fix for this that will toggle the flag appropriately, but it is more
challenging than I anticipated and I am afraid that this patch will
not be completed before the merge window closes, therefore this easier
fix for now. This fix has a negative performance impact in the range
of 0% to 4%. Towards the higher end of the scale if you have driver
and application on the same core and issue a lot of packets, and
towards no negative impact if you use two cores, lower transmission
speeds and/or a workload that also receives packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Magnus Karlsson [Fri, 8 Nov 2019 19:58:09 +0000 (20:58 +0100)]
i40e: need_wakeup flag might not be set for Tx
The need_wakeup flag for Tx might not be set for AF_XDP sockets that
are only used to send packets. This happens if there is at least one
outstanding packet that has not been completed by the hardware and we
get that corresponding completion (which will not generate an
interrupt since interrupts are disabled in the napi poll loop) between
the time we stopped processing the Tx completions and interrupts are
enabled again. In this case, the need_wakeup flag will have been
cleared at the end of the Tx completion processing as we believe we
will get an interrupt from the outstanding completion at a later point
in time. But if this completion interrupt occurs before interrupts
are enable, we lose it and should at that point really have set the
need_wakeup flag since there are no more outstanding completions that
can generate an interrupt to continue the processing. When this
happens, user space will see a Tx queue need_wakeup of 0 and skip
issuing a syscall, which means will never get into the Tx processing
again and we have a deadlock.
This patch introduces a quick fix for this issue by just setting the
need_wakeup flag for Tx to 1 all the time. I am working on a proper
fix for this that will toggle the flag appropriately, but it is more
challenging than I anticipated and I am afraid that this patch will
not be completed before the merge window closes, therefore this easier
fix for now. This fix has a negative performance impact in the range
of 0% to 4%. Towards the higher end of the scale if you have driver
and application on the same core and issue a lot of packets, and
towards no negative impact if you use two cores, lower transmission
speeds and/or a workload that also receives packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Wed, 6 Nov 2019 17:18:23 +0000 (09:18 -0800)]
igb/igc: use ktime accessors for skb->tstamp
When implementing launch time support in the igb and igc drivers, the
skb->tstamp value is assumed to be a s64, but it's declared as a ktime_t
value.
Although ktime_t is typedef'd to s64 it wasn't always, and the kernel
provides accessors for ktime_t values.
Use the ktime_to_timespec64 and ktime_set accessors instead of directly
assuming that the variable is always an s64.
This improves portability if the code is ever moved to another kernel
version, or if the definition of ktime_t ever changes again in the
future.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Arkadiusz Kubalewski [Wed, 6 Nov 2019 14:24:04 +0000 (06:24 -0800)]
i40e: Fix for ethtool -m issue on X722 NIC
This patch contains fix for a problem with command:
'ethtool -m <dev>'
which breaks functionality of:
'ethtool <dev>'
when called on X722 NIC
Disallowed update of link phy_types on X722 NIC
Currently correct value cannot be obtained from FW
Previously wrong value returned by FW was used and was
a root cause for incorrect output of 'ethtool <dev>' command
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Nicholas Nunley [Tue, 5 Nov 2019 12:22:14 +0000 (04:22 -0800)]
iavf: initialize ITRN registers with correct values
Since commit
92418fb14750 ("i40e/i40evf: Use usec value instead of reg
value for ITR defines") the driver tracks the interrupt throttling
intervals in single usec units, although the actual ITRN registers are
programmed in 2 usec units. Most register programming flows in the driver
correctly handle the conversion, although it is currently not applied when
the registers are initialized to their default values. Most of the time
this doesn't present a problem since the default values are usually
immediately overwritten through the standard adaptive throttling mechanism,
or updated manually by the user, but if adaptive throttling is disabled and
the interval values are left alone then the incorrect value will persist.
Since the intended default interval of 50 usecs (vs. 100 usecs as
programmed) performs better for most traffic workloads, this can lead to
performance regressions.
This patch adds the correct conversion when writing the initial values to
the ITRN registers.
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Colin Ian King [Fri, 1 Nov 2019 14:00:17 +0000 (14:00 +0000)]
ice: fix potential infinite loop because loop counter being too small
Currently the for-loop counter i is a u8 however it is being checked
against a maximum value hw->num_tx_sched_layers which is a u16. Hence
there is a potential wrap-around of counter i back to zero if
hw->num_tx_sched_layers is greater than 255. Fix this by making i
a u16.
Addresses-Coverity: ("Infinite loop")
Fixes:
b36c598c999c ("ice: Updates to Tx scheduler code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Manish Chopra [Fri, 8 Nov 2019 10:42:30 +0000 (02:42 -0800)]
qede: fix NULL pointer deref in __qede_remove()
While rebooting the system with SR-IOV vfs enabled leads
to below crash due to recurrence of __qede_remove() on the VF
devices (first from .shutdown() flow of the VF itself and
another from PF's .shutdown() flow executing pci_disable_sriov())
This patch adds a safeguard in __qede_remove() flow to fix this,
so that driver doesn't attempt to remove "already removed" devices.
[ 194.360134] BUG: unable to handle kernel NULL pointer dereference at
00000000000008dc
[ 194.360227] IP: [<
ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.360304] PGD 0
[ 194.360325] Oops: 0000 [#1] SMP
[ 194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200
[ 194.361044] qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables]
[ 194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1
[ 194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019
[ 194.361412] task:
ffff9cea9b360000 ti:
ffff9ceabebdc000 task.ti:
ffff9ceabebdc000
[ 194.361463] RIP: 0010:[<
ffffffffc03553c4>] [<
ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.361534] RSP: 0018:
ffff9ceabebdfac0 EFLAGS:
00010282
[ 194.361570] RAX:
0000000000000000 RBX:
ffff9cd013846098 RCX:
0000000000000000
[ 194.361621] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff9cd013846098
[ 194.361668] RBP:
ffff9ceabebdfae8 R08:
0000000000000000 R09:
0000000000000000
[ 194.361715] R10:
00000000bfe14201 R11:
ffff9ceabfe141e0 R12:
0000000000000000
[ 194.361762] R13:
ffff9cd013846098 R14:
0000000000000000 R15:
ffff9ceab5e48000
[ 194.361810] FS:
00007f799c02d880(0000) GS:
ffff9ceacb0c0000(0000) knlGS:
0000000000000000
[ 194.361865] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 194.361903] CR2:
00000000000008dc CR3:
0000001bdac76000 CR4:
00000000007607e0
[ 194.361953] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 194.362002] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 194.362051] PKRU:
55555554
[ 194.362073] Call Trace:
[ 194.362109] [<
ffffffffc0355500>] qede_remove+0x10/0x20 [qede]
[ 194.362180] [<
ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0
[ 194.362240] [<
ffffffffb98b3c52>] __device_release_driver+0x82/0xf0
[ 194.362285] [<
ffffffffb98b3ce3>] device_release_driver+0x23/0x30
[ 194.362343] [<
ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0
[ 194.362388] [<
ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20
[ 194.362450] [<
ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160
[ 194.362496] [<
ffffffffb97f1aec>] sriov_disable+0x3c/0xf0
[ 194.362534] [<
ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30
[ 194.362599] [<
ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed]
[ 194.362658] [<
ffffffffb9622df6>] ? kfree+0x106/0x140
[ 194.362709] [<
ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed]
[ 194.362754] [<
ffffffffb9622df6>] ? kfree+0x106/0x140
[ 194.362803] [<
ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed]
[ 194.362854] [<
ffffffffc035544e>] __qede_remove+0xae/0x130 [qede]
[ 194.362904] [<
ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede]
[ 194.362956] [<
ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60
[ 194.363010] [<
ffffffffb98b180b>] device_shutdown+0xfb/0x1f0
[ 194.363066] [<
ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40
[ 194.363107] [<
ffffffffb94b66e2>] kernel_restart+0x12/0x60
[ 194.363146] [<
ffffffffb94b6959>] SYSC_reboot+0x229/0x260
[ 194.363196] [<
ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0
[ 194.363253] [<
ffffffffb942b621>] ? __switch_to+0x151/0x580
[ 194.363304] [<
ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0
[ 194.363343] [<
ffffffffb94b69fe>] SyS_reboot+0xe/0x10
[ 194.363387] [<
ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a
[ 194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0
[ 194.363712] RIP [<
ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.363764] RSP <
ffff9ceabebdfac0>
[ 194.363791] CR2:
00000000000008dc
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 8 Nov 2019 04:08:19 +0000 (20:08 -0800)]
net: fix data-race in neigh_event_send()
KCSAN reported the following data-race [1]
The fix will also prevent the compiler from optimizing out
the condition.
[1]
BUG: KCSAN: data-race in neigh_resolve_output / neigh_resolve_output
write to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 1:
neigh_event_send include/net/neighbour.h:443 [inline]
neigh_resolve_output+0x78/0x480 net/core/neighbour.c:1474
neigh_output include/net/neighbour.h:511 [inline]
ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290
ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip_output+0xdf/0x210 net/ipv4/ip_output.c:432
dst_output include/net/dst.h:436 [inline]
ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125
__ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532
ip_queue_xmit+0x45/0x60 include/net/ip.h:237
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
__tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976
tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999
tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515
tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598
tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:618
read to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 0:
neigh_event_send include/net/neighbour.h:442 [inline]
neigh_resolve_output+0x57/0x480 net/core/neighbour.c:1474
neigh_output include/net/neighbour.h:511 [inline]
ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290
ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip_output+0xdf/0x210 net/ipv4/ip_output.c:432
dst_output include/net/dst.h:436 [inline]
ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125
__ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532
ip_queue_xmit+0x45/0x60 include/net/ip.h:237
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
__tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976
tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999
tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515
tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 8 Nov 2019 21:42:40 +0000 (13:42 -0800)]
Merge tag 'pwm/for-5.4-rc7' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fix from Thierry Reding:
"One more fix to keep a reference to the driver's module as long as
there are users of the PWM exposed by the driver"
* tag 'pwm/for-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: bcm-iproc: Prevent unloading the driver module while in use
Peter Zijlstra [Fri, 8 Nov 2019 10:11:52 +0000 (11:11 +0100)]
sched: Fix pick_next_task() vs 'change' pattern race
Commit
67692435c411 ("sched: Rework pick_next_task() slow-path")
inadvertly introduced a race because it changed a previously
unexplored dependency between dropping the rq->lock and
sched_class::put_prev_task().
The comments about dropping rq->lock, in for example
newidle_balance(), only mentions the task being current and ->on_cpu
being set. But when we look at the 'change' pattern (in for example
sched_setnuma()):
queued = task_on_rq_queued(p); /* p->on_rq == TASK_ON_RQ_QUEUED */
running = task_current(rq, p); /* rq->curr == p */
if (queued)
dequeue_task(...);
if (running)
put_prev_task(...);
/* change task properties */
if (queued)
enqueue_task(...);
if (running)
set_next_task(...);
It becomes obvious that if we do this after put_prev_task() has
already been called on @p, things go sideways. This is exactly what
the commit in question allows to happen when it does:
prev->sched_class->put_prev_task(rq, prev, rf);
if (!rq->nr_running)
newidle_balance(rq, rf);
The newidle_balance() call will drop rq->lock after we've called
put_prev_task() and that allows the above 'change' pattern to
interleave and mess up the state.
Furthermore, it turns out we lost the RT-pull when we put the last DL
task.
Fix both problems by extracting the balancing from put_prev_task() and
doing a multi-class balance() pass before put_prev_task().
Fixes:
67692435c411 ("sched: Rework pick_next_task() slow-path")
Reported-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Quentin Perret <qperret@google.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Qais Yousef [Tue, 5 Nov 2019 11:22:12 +0000 (11:22 +0000)]
sched/core: Fix compilation error when cgroup not selected
When cgroup is disabled the following compilation error was hit
kernel/sched/core.c: In function ‘uclamp_update_active_tasks’:
kernel/sched/core.c:1081:23: error: storage size of ‘it’ isn’t known
struct css_task_iter it;
^~
kernel/sched/core.c:1084:2: error: implicit declaration of function ‘css_task_iter_start’; did you mean ‘__sg_page_iter_start’? [-Werror=implicit-function-declaration]
css_task_iter_start(css, 0, &it);
^~~~~~~~~~~~~~~~~~~
__sg_page_iter_start
kernel/sched/core.c:1085:14: error: implicit declaration of function ‘css_task_iter_next’; did you mean ‘__sg_page_iter_next’? [-Werror=implicit-function-declaration]
while ((p = css_task_iter_next(&it))) {
^~~~~~~~~~~~~~~~~~
__sg_page_iter_next
kernel/sched/core.c:1091:2: error: implicit declaration of function ‘css_task_iter_end’; did you mean ‘get_task_cred’? [-Werror=implicit-function-declaration]
css_task_iter_end(&it);
^~~~~~~~~~~~~~~~~
get_task_cred
kernel/sched/core.c:1081:23: warning: unused variable ‘it’ [-Wunused-variable]
struct css_task_iter it;
^~
cc1: some warnings being treated as errors
make[2]: *** [kernel/sched/core.o] Error 1
Fix by protetion uclamp_update_active_tasks() with
CONFIG_UCLAMP_TASK_GROUP
Fixes:
babbe170e053 ("sched/uclamp: Update CPU's refcount on TG's clamp changes")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Patrick Bellasi <patrick.bellasi@matbug.net>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ben Segall <bsegall@google.com>
Link: https://lkml.kernel.org/r/20191105112212.596-1-qais.yousef@arm.com
Tejun Heo [Fri, 8 Nov 2019 20:18:29 +0000 (12:18 -0800)]
cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead
cgroup writeback tries to refresh the associated wb immediately if the
current wb is dead. This is to avoid keeping issuing IOs on the stale
wb after memcg - blkcg association has changed (ie. when blkcg got
disabled / enabled higher up in the hierarchy).
Unfortunately, the logic gets triggered spuriously on inodes which are
associated with dead cgroups. When the logic is triggered on dead
cgroups, the attempt fails only after doing quite a bit of work
allocating and initializing a new wb.
While
c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if mapping
has no dirty pages") alleviated the issue significantly as it now only
triggers when the inode has dirty pages. However, the condition can
still be triggered before the inode is switched to a different cgroup
and the logic simply doesn't make sense.
Skip the immediate switching if the associated memcg is dying.
This is a simplified version of the following two patches:
* https://lore.kernel.org/linux-mm/
20190513183053.GA73423@dennisz-mbp/
* http://lkml.kernel.org/r/
156355839560.2063.
5265687291430814589.stgit@buzz
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes:
e8a7abf5a5bd ("writeback: disassociate inodes from dying bdi_writebacks")
Acked-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 8 Nov 2019 20:31:27 +0000 (12:31 -0800)]
Merge tag 'ceph-for-5.4-rc7' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Some late-breaking dentry handling fixes from Al and Jeff, a patch to
further restrict copy_file_range() to avoid potential data corruption
from Luis and a fix for !CONFIG_CEPH_FSCACHE kernels.
Everything but the fscache fix is marked for stable"
* tag 'ceph-for-5.4-rc7' of git://github.com/ceph/ceph-client:
ceph: return -EINVAL if given fsc mount option on kernel w/o support
ceph: don't allow copy_file_range when stripe_count != 1
ceph: don't try to handle hashed dentries in non-O_CREAT atomic_open
ceph: add missing check in d_revalidate snapdir handling
ceph: fix RCU case handling in ceph_d_revalidate()
ceph: fix use-after-free in __ceph_remove_cap()
Stefano Garzarella [Fri, 8 Nov 2019 16:08:50 +0000 (17:08 +0100)]
vsock/virtio: fix sock refcnt holding during the shutdown
The "
42f5cda5eaf4" commit rightly set SOCK_DONE on peer shutdown,
but there is an issue if we receive the SHUTDOWN(RDWR) while the
virtio_transport_close_timeout() is scheduled.
In this case, when the timeout fires, the SOCK_DONE is already
set and the virtio_transport_close_timeout() will not call
virtio_transport_reset() and virtio_transport_do_close().
This causes that both sockets remain open and will never be released,
preventing the unloading of [virtio|vhost]_transport modules.
This patch fixes this issue, calling virtio_transport_reset() and
virtio_transport_do_close() when we receive the SHUTDOWN(RDWR)
and there is nothing left to read.
Fixes:
42f5cda5eaf4 ("vsock/virtio: set SOCK_DONE on peer shutdown")
Cc: Stephen Barber <smbarber@chromium.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 8 Nov 2019 19:37:24 +0000 (11:37 -0800)]
Merge tag 'mac80211-for-net-2019-11-08' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Three small fixes:
* we hit a failure path bug related to
ieee80211_txq_setup_flows()
* also use kvmalloc() to make that less likely
* fix a timing value shortly after boot (during
INITIAL_JIFFIES)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Sverdlin [Fri, 8 Nov 2019 10:00:44 +0000 (10:00 +0000)]
net: ethernet: octeon_mgmt: Account for second possible VLAN header
Octeon's input ring-buffer entry has 14 bits-wide size field, so to account
for second possible VLAN header max_mtu must be further reduced.
Fixes:
109cc16526c6d ("ethernet/cavium: use core min/max MTU checking")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 8 Nov 2019 17:48:19 +0000 (09:48 -0800)]
Merge tag 'modules-for-v5.4-rc7' of git://git./linux/kernel/git/jeyu/linux
Pull modules fix from Jessica Yu:
"Fix `make nsdeps` for modules composed of multiple source files.
Since $mod_source_files was not in quotes in the call to
generate_deps_for_ns(), not all the source files for a module were
being passed to spatch"
* tag 'modules-for-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
scripts/nsdeps: make sure to pass all module source files to spatch
Linus Torvalds [Fri, 8 Nov 2019 17:43:34 +0000 (09:43 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"Fix pte_same() to avoid getting stuck on write fault.
This single arm64 fix is a revert of
747a70e60b72 ("arm64: Fix
copy-on-write referencing in HugeTLB"), not because that patch was
wrong, but because it was broken by
aa57157be69f ("arm64: Ensure
VM_WRITE|VM_SHARED ptes are clean by default") which we merged in
-rc6.
We spotted the issue in Android (AOSP), where one of the JIT threads
gets stuck on a write fault during boot because the faulting pte is
marked as PTE_DIRTY | PTE_WRITE | PTE_RDONLY and the fault handler
decides that there's nothing to do thanks to pte_same() masking out
PTE_RDONLY.
Thanks to John Stultz for reporting this and testing this so quickly,
and to Steve Capper for confirming that the HugeTLB tests continue to
pass"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Do not mask out PTE_RDONLY in pte_same()
Uwe Kleine-König [Thu, 17 Oct 2019 19:22:18 +0000 (21:22 +0200)]
pwm: bcm-iproc: Prevent unloading the driver module while in use
The owner member of struct pwm_ops must be set to THIS_MODULE to
increase the reference count of the module such that the module cannot
be removed while its code is in use.
Fixes:
daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Alex Deucher [Thu, 7 Nov 2019 14:50:18 +0000 (09:50 -0500)]
drm/amdgpu/powerplay: fix AVFS handling with custom powerplay table
When a custom powerplay table is provided, we need to update
the OD VDDC flag to avoid AVFS being enabled when it shouldn't be.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205393
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Fri, 8 Nov 2019 05:20:30 +0000 (13:20 +0800)]
drm/amd/powerplay: dynamically disable ds and ulv for compute
This is to improve the performance in the compute mode
for vega10. For example, the original performance for a rocm
bandwidth test: 2G internal GPU copy, is about 99GB/s.
With the idle power features disabled dynamically, the porformance
is promoted to about 215GB/s.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 7 Nov 2019 07:33:50 +0000 (15:33 +0800)]
drm/amd/powerplay: correct Arcturus OD support
OD is not supported on Arcturus. Thus the
pp_od_clk_voltage sysfs interface is also not supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
changzhu [Thu, 7 Nov 2019 06:09:27 +0000 (14:09 +0800)]
drm/amdgpu: allow direct upload save restore list for raven2
It will cause modprobe atombios stuck problem in raven2 if it doesn't
allow direct upload save restore list from gfx driver.
So it needs to allow direct upload save restore list for raven2
temporarily.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stephen Rothwell [Fri, 8 Nov 2019 05:31:10 +0000 (16:31 +1100)]
drm/sched: struct completion requires linux/completion.h inclusion
Fixes:
83a7772ba223 ("drm/sched: Use completion to wait for sched->thread idle v2.")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Fri, 8 Nov 2019 16:46:49 +0000 (08:46 -0800)]
Merge tag 'xarray-5.4' of git://git.infradead.org/users/willy/linux-dax
Pull XArray fixes from Matthew Wilcox:
"These all fix various bugs, some of which people have tripped over and
some of which have been caught by automatic tools"
* tag 'xarray-5.4' of git://git.infradead.org/users/willy/linux-dax:
idr: Fix idr_alloc_u32 on 32-bit systems
idr: Fix integer overflow in idr_for_each_entry
radix tree: Remove radix_tree_iter_find
idr: Fix idr_get_next_ul race with idr_remove
XArray: Fix xas_next() with a single entry at 0
Linus Torvalds [Fri, 8 Nov 2019 16:33:32 +0000 (08:33 -0800)]
Merge tag 'pm-5.4-rc7' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix an 'unchecked MSR access' warning in the intel_pstate cpufreq
driver (Srinivas Pandruvada)"
* tag 'pm-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix invalid EPB setting
Linus Torvalds [Fri, 8 Nov 2019 16:22:19 +0000 (08:22 -0800)]
Merge tag 'sound-5.4-rc7' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It became a bit largish, but all small and good for 5.4:
- A regression fix of ALSA timer code bug that sneaked in by a recent
cleanup; never trust innocent-looking guys...
- Fix for compress API max size check signedness
- Fixes in HD-audio: CA0132 work stall, Intel Tigerlake HDMI
- A few fixes for SOF: memory leak, sanity-check and build fixes
- A collection of device-specific fixes: firewire, rockchip, ASoC
HDMI, rsnd, ASoC HDA, stm32, TI, kirkwood, msm, max98373"
* tag 'sound-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Fix incorrectly assigned timer instance
ASoC: SOF: topology: Fix bytes control size checks
ALSA: hda: hdmi - add Tigerlake support
ASoC: max98373: replace gpio_request with devm_gpio_request
ASoC: stm32: sai: add restriction on mmap support
ALSA: hda/ca0132 - Fix possible workqueue stall
ASoC: hdac_hda: fix race in device removal
ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series
ASoC: rockchip: rockchip_max98090: Enable SHDN to fix headset detection
ASoC: ti: sdma-pcm: Add back the flags parameter for non standard dma names
ASoC: SOF: ipc: Fix memory leak in sof_set_get_large_ctrl_data
ASoC: SOF: Fix memory leak in sof_dfsentry_write
ASoC: SOF: Intel: hda-stream: fix the CONFIG_ prefix missing
ASoC: kirkwood: fix device remove ordering
ASoC: rsnd: dma: fix SSI9 4/5/6/7 busif dma address
ASoC: hdmi-codec: drop mutex locking again
ASoC: kirkwood: fix external clock probe defer
ASoC: compress: fix unsigned integer overflow check
ASoC: msm8916-wcd-analog: Fix RX1 selection in RDAC2 MUX
Linus Torvalds [Fri, 8 Nov 2019 16:17:22 +0000 (08:17 -0800)]
Merge tag 'drm-fixes-2019-11-08' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Weekly fixes for drm: amdgpu has a few but they are pretty scattered
fixes, the fbdev one is a build regression fix that we didn't want to
risk leaving out, otherwise a couple of i915, one radeon and a core
atomic fix.
core:
- add missing documentation for GEM shmem madvise helpers
- Fix for a state dereference in atomic self-refresh helpers
fbdev:
- One compilation fix for c2p fbdev helpers
amdgpu:
- Fix navi14 display issue root cause and revert workaround
- GPU reset scheduler interaction fix
- Fix fan boost on multi-GPU
- Gfx10 and sdma5 fixes for navi
- GFXOFF fix for renoir
- Add navi14 PCI ID
- GPUVM fix for arcturus
radeon:
- Port an SI power fix from amdgpu
i915:
- Fix HPD poll to avoid kworker consuming a lot of cpu cycles.
- Do not use TBT type for non Type-C ports"
* tag 'drm-fixes-2019-11-08' of git://anongit.freedesktop.org/drm/drm:
drm/radeon: fix si_enable_smc_cac() failed issue
drm/amdgpu/renoir: move gfxoff handling into gfx9 module
drm/amdgpu: add warning for GRBM 1-cycle delay issue in gfx9
drm/amdgpu: add dummy read by engines for some GCVM status registers in gfx10
drm/amdgpu: register gpu instance before fan boost feature enablment
drm/amd/swSMU: fix smu workload bit map error
drm/shmem: Add docbook comments for drm_gem_shmem_object madvise fields
drm/amdgpu: add navi14 PCI ID
Revert "drm/amd/display: setting the DIG_MODE to the correct value."
drm/amd/display: Add ENGINE_ID_DIGD condition check for Navi14
drm/amdgpu: dont schedule jobs while in reset
drm/amdgpu/arcturus: properly set BANK_SELECT and FRAGMENT_SIZE
drm/atomic: fix self-refresh helpers crtc state dereference
drm/i915/dp: Do not switch aux to TBT mode for non-TC ports
drm/i915: Avoid HPD poll detect triggering a new detect cycle
fbdev: c2p: Fix link failure on non-inlining
Linus Torvalds [Fri, 8 Nov 2019 16:15:01 +0000 (08:15 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Fixes for various clk driver issues that happened because of code we
merged this merge window.
The Amlogic driver was missing some flags causing rates to be rounded
improperly or clk_set_rate() to fail. The Samsung driver wasn't
freeing everything on error paths and improperly saving/restoring PLL
state across suspend/resume. The at91 driver was calling msleep() too
early when scheduling hadn't started, so we put in place a quick
solution until we can handle this sort of problem in the core
framework.
There were also problems with the Allwinner driver and operator
precedence being incorrect causing subtle bugs. Finally, the TI driver
was duplicating aliases and not delaying long enough leading to some
unexpected timeouts"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: ti: clkctrl: Fix failed to enable error with double udelay timeout
clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call
clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18
clk: sunxi: Fix operator precedence in sunxi_divs_clk_setup
clk: ast2600: Fix enabling of clocks
clk: at91: avoid sleeping early
clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARM
clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume
clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU
clk: samsung: exynos5433: Fix error paths
clk: at91: sam9x60: fix programmable clock
clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes
clk: meson: g12a: fix cpu clock rate setting
clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate
Dan Carpenter [Thu, 7 Nov 2019 07:48:47 +0000 (10:48 +0300)]
block: drbd: remove a stray unlock in __drbd_send_protocol()
There are two callers of this function and they both unlock the mutex so
this ends up being a double unlock.
Fixes:
44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Srinivas Pandruvada [Thu, 31 Oct 2019 19:26:20 +0000 (12:26 -0700)]
cpufreq: intel_pstate: Fix invalid EPB setting
The max value of EPB can only be 0x0F. Attempting to set more than that
triggers an "unchecked MSR access error" warning which happens in
intel_pstate_hwp_force_min_perf() called via cpufreq stop_cpu().
However, it is not even necessary to touch the EPB from intel_pstate,
because it is restored on every CPU online by the intel_epb.c code,
so let that code do the right thing and drop the redundant (and
incorrect) EPB update from intel_pstate.
Fixes:
af3b7379e2d70 ("cpufreq: intel_pstate: Force HWP min perf before offline")
Reported-by: Qian Cai <cai@lca.pw>
Cc: 5.2+ <stable@vger.kernel.org> # 5.2+
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>