OSDN Git Service
Takashi Iwai [Wed, 20 Jun 2018 15:10:51 +0000 (17:10 +0200)]
ALSA: hda/cirrus - Simplify creation of new controls
This patch moves the mixer creation code in Cirrus codec driver from
its own build_controls callback to snd_hda_gen_add_kctl() for
simplification.
As a bonus, this allows us to remove the cs421x_build_controls as it
becomes identical with snd_hda_gen_build_controls().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 20 Jun 2018 15:06:58 +0000 (17:06 +0200)]
ALSA: hda/conexant - Clean up beep code
Like the previous commit for Realtek codec, the similar cleanup work
can be applied to Conexant codec, too. A slight difference is that
the call of cx_auto_parse_beep() is moved after
snd_hda_gen_parse_auto_config(). It's not strictly needed, but it'd
be good to make the creation of such beep mixers at the end, which
matches with the former situation.
Along with this conversion, cx_auto_build_controls() becomes just
calling snd_hda_gen_build_controls(), so it's simply replaced with
snd_hda_gen_build_controls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 20 Jun 2018 10:52:46 +0000 (12:52 +0200)]
ALSA: hda/realtek - Use common helper for creating beep controls
In the Realtek codec driver, we used to build kctl elements for beep
mixer in the own build_controls callback. This is an open-code and
can be covered by the standard feature of the generic parser with
snd_hda_gen_add_kctl() instead.
Also, after the conversion, spec->beep_amp becomes superfluous; hence
it's removed along with the conversion.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 20 Jun 2018 10:50:11 +0000 (12:50 +0200)]
ALSA: hda/realtek - Use common helper for creating ALC268 beep controls
The beep mixer controls are the only remaining stuff that uses
spec->mixers[] array, and they can be well converted to the standard
helper in the generic parser, snd_hda_gen_add_kctl().
This simplifies the code, especially the superfluous mixers and
num_mixers fields can be now removed from alc_spec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 19 Jun 2018 21:05:47 +0000 (23:05 +0200)]
ALSA: hda/realtek - Use common GPIO mask for ALC660VD ASUS fixup
The ALC660VD_FIX_ASUS_GPIO1 quirk requires to set up GPIO bit0 ON
while bit 1 OFF. Implement the fixup function and convert from the
static init verbs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 19 Jun 2018 21:04:03 +0000 (23:04 +0200)]
ALSA: hda/realtek - Simplify Dell XPS13 GPIO handling
Dell XPS13 has multi-step fixups, and one of them
(ALC288_FIXUP_DELL_XPS_13_GPIO6) corresponds to the management of GPIO
bit6 (0x40). It used to be a static init verbs (to turn *off* the
bit6).
In this patch, we convert it as the gpio_mask and gpio_dir
initializations folded in the existing fixup function. With this
change, ALC288_FIXUP_DELL_XPS_13_GPIO6 becomes superfluous, thus it's
removed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 19 Jun 2018 21:00:03 +0000 (23:00 +0200)]
ALSA: hda/realtek - Convert some manual GPIO setups
This patch converts the remaining static init verbs for GPIO bits with
the common gpio_* fields management. Only the verbs setting the GPIO
data bits are targeted in this patch. The rest will be changed in
later patches.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 19 Jun 2018 20:47:30 +0000 (22:47 +0200)]
ALSA: hda/realtek - Simplify mute LED GPIO handling
Now we can simplify the mute LED GPIO handling as well. Each fixup
dealing with GPIO for the mute LED controls defined the static init
verbs, and they are converted to the common GPIO bit fields with the
new helper, alc_fixup_hp_gpio_led().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 19 Jun 2018 20:34:26 +0000 (22:34 +0200)]
ALSA: hda/realtek - Simplify alc885_fixup_macpro_gpio()
The fixup for Macbook Pro is nothing but setting the GPIO bits as
usual but with one exception: it adds some delay at writing the GPIO
bits.
Add a flag to put the conditional delay in the common helper, and
clean up alc885_fixup_macpro_gpio() with the new flag.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 19 Jun 2018 20:32:29 +0000 (22:32 +0200)]
ALSA: hda/realtek - Consolidate gpio_data and gpio_led
Until now, two fields, gpio_data and gpio_led, coexist in alc_spec
although basically both of them serve for the same purpose -- the GPIO
data bits.
This patch consolidates both usages and eliminates the superfluous
gpio_led field.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 19 Jun 2018 20:28:22 +0000 (22:28 +0200)]
ALSA: hda/realtek - Add GPIO data update helper
For updating GPIO bits dynamically, provide a new helper, and use it
from the alc260 automute hook. This helper will be used by other
places in future, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 19 Jun 2018 20:22:41 +0000 (22:22 +0200)]
ALSA: hda/realtek - Manage GPIO bits commonly
Currently the GPIO bits are managed by individual verbs in some cases
while toggled dynamically in other cases. For simplifying the GPIO
management, define the GPIO mask, dir and data bits in alc_spec
fields, and refer to / set them consistently from all places.
As a first step, along with the definition of the new gpio_* fields,
this patch replaces the static verbs that are used at initialization
and fixups with the common helper functions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 21 Jun 2018 14:37:54 +0000 (16:37 +0200)]
ALSA: hda/realtek - Allow skipping spec->init_amp detection
Some devices have the overrides of spec->init_amp at
HDA_FIXUP_ACT_PROBE just because alc_ssid_check() gives the
false-positive values from the SSID.
For more consistent behavior, define the logic in the following way:
- Define ALC_INIT_UNDEFINED as the default value before calling
alc_ssid_check()
- Each fixup may set up spec->init_amp with another value at
HDA_FIXUP_ACT_PRE_PROBE
- At detection, check whether spec->init_amp is ALC_INIT_UNDEFINED or
not; if it's different, we skip the detection
Also, it turned out that ASUS TX300 requires the spec->init_amp
override, too; currently it ignores the GPIO bits implicitly by its
static init verb, but this will be changed in the later patchset.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 25 Jun 2018 08:03:39 +0000 (10:03 +0200)]
Merge branch 'topic/ac97-bus' into for-next
Robert Jarzmik [Fri, 22 Jun 2018 19:28:34 +0000 (21:28 +0200)]
ALSA: ac97: add codecs devicetree binding
Add a devicetree binding for codecs. This is especially useful if the
AC97 bitclk clock is provided by the codec, as it has to be described in
the devicetree description for the ac97 bus code to aquire it.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Robert Jarzmik [Fri, 22 Jun 2018 19:28:33 +0000 (21:28 +0200)]
ALSA: ac97: add bus binding for codecs
Add the generic ac97 bus binding, especially for ac97 codecs discovered
by ac97 hardware probing.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 19 Jun 2018 21:15:59 +0000 (23:15 +0200)]
ALSA: hda/realtek - Simplify alc269_fixup_hp_line1_mic1_led()
alc269_fixup_hp_line1_mic1_led() can be simplified more with the
existing helper code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 19 Jun 2018 10:45:53 +0000 (12:45 +0200)]
ALSA: hda - Sanity check of unexpected cap_sync_hook override
There are a couple of places setting cap_sync_hook in the codec
drivers, and they just overwrite the value. Add a sanity check via
WARN_ON() in case if an old non-NULL value is overridden and
forgotten.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 19 Jun 2018 10:44:35 +0000 (12:44 +0200)]
ALSA: hda/sigmatel - Use common helper for mic mute LED
To simplify the code and to get the mic-mute LED behavior control, use
the new helper function for controlling the mic mute LED instead of
open-codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 19 Jun 2018 10:42:03 +0000 (12:42 +0200)]
ALSA: hda - Allow multiple ADCs for mic mute LED controls
Instead of refusing, allow the configuration with the multiple ADCs
(thus multiple capture switches) for enabling the mic mute LED.
This has been done for Sigmatel/IDT codecs, and we treat the OR-ed
values from all capture switches as the boolean condition.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 19 Jun 2018 10:36:36 +0000 (12:36 +0200)]
ALSA: hda/conexant - Use the mic-mute LED helper
Convert to use the common helper for controlling the mic mute LED for
HP laptops, just as we've done for Realtek codecs. This will give the
mic mute LED enum as gratis.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 19 Jun 2018 10:29:13 +0000 (12:29 +0200)]
ALSA: hda/realtek - Use the mic-mute LED helper for HP and others
Similar as the previous commit, convert to use the common helper for
controlling the mic mute LED for HP and other machines in the Realtek
codec driver, too. This will give the mic mute LED enum as gratis.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 18 Jun 2018 15:28:45 +0000 (17:28 +0200)]
ALSA: hda - Use the common helper for thinkpad_acpi mic mute LED handling
Use the new common helper for setting up and controlling the mic mute
LED over thinkpad_acpi. This also provides a new mixer enum "Mic
Mute-LED Mode" (that was present only for Dell models), which allows
user to choose the mic mute LED behavior. For example, if you want
the mic mute LED turned on only while mic is on, choose "Follow
Capture" there.
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 18 Jun 2018 15:26:12 +0000 (17:26 +0200)]
ALSA: hda - Move mic mute LED helper to the generic parser
Move the code for setting up and controlling the mic mute LED hook
from dell-wmi helper to the generic parser, so that it can be referred
from the multiple driver codes.
No functional change.
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Mon, 18 Jun 2018 12:07:55 +0000 (21:07 +0900)]
ALSA: firewire-motu: add support for Motu Traveler
This commit adds support for MOTU Traveler, launched in 2005, discontinued
quite before. As a result, transmission of PCM frame and MIDI messages is
available via ALSA PCM and RawMIDI/Sequencer interfaces.
This model supports sampling transmission frequency up to 192.0 kHz, and
AES/EBU on XLR interface and ADAT on optical interface. Unlike
Motu 828MkII, Windows driver can switch fetching mode for DSP, like
mute/unmute feature.
Although this commit enables high sampling transmission frequency, actual
sound from this model is not good. As long as I tested, it's silence at
176.4 kHz, and it includes hissing noise at 192.0 kHz. In my opinion, as I
reported at
3526ce7f9ba7 ('ALSA: firewire-motu: add MOTU specific protocol
layer'), timestamping on source packet header (SPH) may not still be good
for this model as well.
$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400
04106505 bus_info_length 4, crc_length 16, crc 25861
404
31333934 bus_name "1394"
408
20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c
0001f200 company_id 0001f2 |
410
0001f32f device_id
000001f32f | EUI-64
0001f2000001f32f
root directory
-----------------------------------------------------------------
414
0004c65c directory_length 4, crc 50780
418
030001f2 vendor
41c
0c0083c0 node capabilities per IEEE 1394
420
8d000006 --> eui-64 leaf at 438
424
d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428
00035955 directory_length 3, crc 22869
42c
120001f2 specifier id
430
13000009 version
434
17107800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438
000206b2 leaf_length 2, crc 1714
43c
0001f200 company_id 0001f2 |
440
0001f32f device_id
000001f32f | EUI-64
0001f2000001f32f
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Mon, 18 Jun 2018 12:07:54 +0000 (21:07 +0900)]
ALSA: firewire-motu: cancel chunk alignment for protocol version 2
For MOTU protocol version 2, this driver arranges the number of data
chunks to align chunks to quadlet data channel. However, MOTU Traveler
has padding bytes in the end of data block at high clock mode.
This commit removes the arrangement. Fortunately, at low and middle clock
mode, supported model for v2 protocol (828mkII) gets no influence from this
change because all of combination for data chunks are just aligned to
quadlet data channel.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Mon, 18 Jun 2018 12:07:53 +0000 (21:07 +0900)]
ALSA: firewire-motu: add a flag for AES/EBU on XLR interface
MOTU Traveler supports AES/EBU on XLR interface and data block of rx/tx
packet includes two chunk for the interface. This commit adds a flag
for this purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Mon, 18 Jun 2018 12:07:52 +0000 (21:07 +0900)]
ALSA: firewire-motu: add a flag for chunks for main 1/2 out
This driver explicitly assumes that all of supported models have main data
chunk separated from chunk for analog ports. However, MOTU Traveler doesn't
support the separated main data chunk.
This commit adds a flag for the separated main data chunk.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Mon, 18 Jun 2018 12:07:51 +0000 (21:07 +0900)]
ALSA: firewire-motu: suppless consumption for unused element of array in stack
In MOTU firewire protocol, data block consists of 24 bit data chunks except
for one quadlet for source packet header (SPH). The number of data chunk in
a data block is different between three clock modes; low, middle and high.
When unit supports ADAT on optical interface, the data block includes some
chunks for ADAT channels. These ADAT chunks are unavailable at high mode.
This driver has local functions to calculate the number of ADAT chunks. But
They uses stack for three clock modes. This is useless for higher mode.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Arnd Bergmann [Mon, 18 Jun 2018 15:41:01 +0000 (17:41 +0200)]
ALSA: line6: stop using get_seconds()
The get_seconds() function is deprecated because it truncates the
timestamp to 32 bits, so all users should change to ktime_get_seconds()
or ktime_get_real_seconds().
The firmware interface for passing the timestamp is also limited to
32 bits, so this patch only has the cosmetic effect of avoiding the
old interface.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stefan Agner [Sun, 17 Jun 2018 13:46:49 +0000 (15:46 +0200)]
ALSA: ctxfi: use enum type CT_SUM_CTL where appropriate
Currently a variable of type enum CT_AMIXER_CTL is used for enum
CT_SUM_CTL values. This leads to warnings when using clang:
sound/pci/ctxfi/ctmixer.c:945:32: warning: implicit conversion from enumeration type
'enum CT_SUM_CTL' to different enumeration type 'enum CT_AMIXER_CTL'
[-Wenum-conversion]
for (i = AMIXER_MASTER_F, j = SUM_IN_F;
~ ^~~~~~~~
sound/pci/ctxfi/ctmixer.c:975:29: warning: implicit conversion from enumeration type
'enum CT_SUM_CTL' to different enumeration type 'enum CT_AMIXER_CTL'
[-Wenum-conversion]
for (i = AMIXER_PCM_F, j = SUM_IN_F; i <= AMIXER_PCM_S; i++, j++) {
~ ^~~~~~~~
Introduce enum CT_SUM_CTL k and it instead.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stefan Agner [Sun, 17 Jun 2018 13:46:29 +0000 (15:46 +0200)]
ALSA: ice1724: remove unused array
This fixes a warning seen with clang:
sound/pci/ice1712/prodigy_hifi.c:321:28: warning: variable 'wm_vol' is not
needed and will not be emitted [-Wunneeded-internal-declaration]
static const unsigned char wm_vol[256] = {
^
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alastair Bridgewater [Sat, 16 Jun 2018 01:56:20 +0000 (21:56 -0400)]
ALSA: hda/ca0132: Fix DMic data rate for Alienware M17x R4
The commentary says to use various parameters, and lays out what
the mapping is... The code used a 32KHz rate when the comment
says that it needs to use a 48KHz rate. And this has been the
case since day one.
On the Alienware M17x R4, the DMic used to have exceptionally quiet
pickup and a lot of noise. Changing the data rate fixes both of
these issues.
Searching the kernel bug tracker for ca0132-related issues shows no
mention of this being an issue for other hardware, and I have no
other hardware to test with, so a quirk is used to limit the effect
to just the M17x R4.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alastair Bridgewater [Sat, 16 Jun 2018 01:56:19 +0000 (21:56 -0400)]
ALSA: hda/ca0132: Restore PCM Analog Mic-In2
Commit
009b8f979bf8cb5f7ec6d3dd7683585122ed10f8 conditionalized
adding the "CA0132 Analog Mic-In2" PCM with a comment to the
effect that, "desktops don't use this ADC", but the test was set
up such that the ADC was only created for desktops. Invert the
test.
Fixes:
009b8f979bf8 ("ALSA: hda/ca0132: update core functions for sbz + r3di")
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alastair Bridgewater [Sat, 16 Jun 2018 01:56:18 +0000 (21:56 -0400)]
ALSA: hda/ca0132: Don't test for QUIRK_NONE
QUIRK_NONE is, quite explicitly, the default case. The entire
point of a quirks system is to allow "programming by difference"
from a given base case, which requires that merely defining a new
quirk for some piece of hardware should not change the behavior of
the driver for that hardware. In turn, this means that testing
for QUIRK_NONE explicitly is a violation of that implicit contract.
Change a test for QUIRK_NONE and QUIRK_ALIENWARE to default, and
add a test for QUIRK_SBZ to disable the default behavior in that
instance.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alastair Bridgewater [Sat, 16 Jun 2018 01:56:17 +0000 (21:56 -0400)]
ALSA: hda/ca0132: Restore behavior of QUIRK_ALIENWARE
Commit
e93ac30a32a6ba7ac3b4b2a4379af1dadb91e505 (ALSA: HDA/ca0132:
add extra init functions for r3di + sbz) introduced an extra
initialization function that was improperly guarded, taking effect
on systems with QUIRK_ALIENWARE, even though such systems were
supposedly not affected.
It may be that this piece of initialization should be done for all
systems, but that's not a call that I can make.
Fixes:
e93ac30a32a6 ("ALSA: HDA/ca0132: add extra init functions for r3di + sbz")
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alastair Bridgewater [Sat, 16 Jun 2018 01:56:16 +0000 (21:56 -0400)]
ALSA: hda/ca0132: Delete redundant UNSOL event requests
During ca0132_init(), ca0132_init_unsol() is run before the
spec->spec_init_verbs are written. ca0132_init_unsol() calls
snd_hda_jack_detect_enable_callback(), which requests UNSOL events
for three or four nodes, two of which were also (redundantly)
requested by spec_init_verbs.
Kill the redundant AC_VERB_SET_UNSOLICITED_ENABLE verbs.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alastair Bridgewater [Sat, 16 Jun 2018 01:56:15 +0000 (21:56 -0400)]
ALSA: hda/ca0132: Delete pointless assignments to struct auto_pin_cfg fields
ca0132_config() was setting some values in the auto_pin_cfg for
the codec... but it is called prior to snd_hda_parse_pin_defcfg(),
which does a memset() to clear the entire structure as one of its
first actions, making the entire exercise pointless.
Kill all use of struct auto_pin_cfg from ca0132_config().
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 13 Jun 2018 10:43:10 +0000 (12:43 +0200)]
ALSA: hda/realtek - Fix pop noise on Lenovo P50 & co
Some Lenovo laptops, e.g. Lenovo P50, showed the pop noise at resume
or runtime resume. It turned out to be reduced by applying
alc_no_shutup() just like TPT440 quirk does.
Since there are many Lenovo models showing the same behavior, put this
workaround in ALC269_FIXUP_THINKPAD_ACPI entry so that it's applied
commonly to all such Lenovo machines.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Benjamin Berg <bberg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Sat, 16 Jun 2018 23:04:49 +0000 (08:04 +0900)]
Linux 4.18-rc1
Linus Torvalds [Sat, 16 Jun 2018 20:37:55 +0000 (05:37 +0900)]
Merge tag 'for-linus-
20180616' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes that should go into -rc1. This contains:
- bsg_open vs bsg_unregister race fix (Anatoliy)
- NVMe pull request from Christoph, with fixes for regressions in
this window, FC connect/reconnect path code unification, and a
trace point addition.
- timeout fix (Christoph)
- remove a few unused functions (Christoph)
- blk-mq tag_set reinit fix (Roman)"
* tag 'for-linus-
20180616' of git://git.kernel.dk/linux-block:
bsg: fix race of bsg_open and bsg_unregister
block: remov blk_queue_invalidate_tags
nvme-fabrics: fix and refine state checks in __nvmf_check_ready
nvme-fabrics: handle the admin-only case properly in nvmf_check_ready
nvme-fabrics: refactor queue ready check
blk-mq: remove blk_mq_tagset_iter
nvme: remove nvme_reinit_tagset
nvme-fc: fix nulling of queue data on reconnect
nvme-fc: remove reinit_request routine
blk-mq: don't time out requests again that are in the timeout handler
nvme-fc: change controllers first connect to use reconnect path
nvme: don't rely on the changed namespace list log
nvmet: free smart-log buffer after use
nvme-rdma: fix error flow during mapping request data
nvme: add bio remapping tracepoint
nvme: fix NULL pointer dereference in nvme_init_subsystem
blk-mq: reinit q->tag_set_list entry only after grace period
Linus Torvalds [Sat, 16 Jun 2018 20:25:18 +0000 (05:25 +0900)]
Merge tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental
Pull documentation fixes from Mauro Carvalho Chehab:
"This solves a series of broken links for files under Documentation,
and improves a script meant to detect such broken links (see
scripts/documentation-file-ref-check).
The changes on this series are:
- can.rst: fix a footnote reference;
- crypto_engine.rst: Fix two parsing warnings;
- Fix a lot of broken references to Documentation/*;
- improve the scripts/documentation-file-ref-check script, in order
to help detecting/fixing broken references, preventing
false-positives.
After this patch series, only 33 broken references to doc files are
detected by scripts/documentation-file-ref-check"
* tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental: (26 commits)
fix a series of Documentation/ broken file name references
Documentation: rstFlatTable.py: fix a broken reference
ABI: sysfs-devices-system-cpu: remove a broken reference
devicetree: fix a series of wrong file references
devicetree: fix name of pinctrl-bindings.txt
devicetree: fix some bindings file names
MAINTAINERS: fix location of DT npcm files
MAINTAINERS: fix location of some display DT bindings
kernel-parameters.txt: fix pointers to sound parameters
bindings: nvmem/zii: Fix location of nvmem.txt
docs: Fix more broken references
scripts/documentation-file-ref-check: check tools/*/Documentation
scripts/documentation-file-ref-check: get rid of false-positives
scripts/documentation-file-ref-check: hint: dash or underline
scripts/documentation-file-ref-check: add a fix logic for DT
scripts/documentation-file-ref-check: accept more wildcards at filenames
scripts/documentation-file-ref-check: fix help message
media: max2175: fix location of driver's companion documentation
media: v4l: fix broken video4linux docs locations
media: dvb: point to the location of the old README.dvb-usb file
...
Linus Torvalds [Sat, 16 Jun 2018 20:06:18 +0000 (05:06 +0900)]
Merge tag 'fsnotify_for_v4.18-rc1' of git://git./linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"fsnotify cleanups unifying handling of different watch types.
This is the shortened fsnotify series from Amir with the last five
patches pulled out. Amir has modified those patches to not change
struct inode but obviously it's too late for those to go into this
merge window"
* tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: add fsnotify_add_inode_mark() wrappers
fanotify: generalize fanotify_should_send_event()
fsnotify: generalize send_to_group()
fsnotify: generalize iteration of marks by object type
fsnotify: introduce marks iteration helpers
fsnotify: remove redundant arguments to handle_event()
fsnotify: use type id to identify connector object type
Linus Torvalds [Sat, 16 Jun 2018 20:00:24 +0000 (05:00 +0900)]
Merge tag 'fbdev-v4.18' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"There is nothing really major here, few small fixes, some cleanups and
dead drivers removal:
- mark omapfb drivers as orphans in MAINTAINERS file (Tomi Valkeinen)
- add missing module license tags to omap/omapfb driver (Arnd
Bergmann)
- add missing GPIOLIB dependendy to omap2/omapfb driver (Arnd
Bergmann)
- convert savagefb, aty128fb & radeonfb drivers to use msleep & co.
(Jia-Ju Bai)
- allow COMPILE_TEST build for viafb driver (media part was reviewed
by media subsystem Maintainer)
- remove unused MERAM support from sh_mobile_lcdcfb and shmob-drm
drivers (drm parts were acked by shmob-drm driver Maintainer)
- remove unused auo_k190xfb drivers
- misc cleanups (Souptick Joarder, Wolfram Sang, Markus Elfring, Andy
Shevchenko, Colin Ian King)"
* tag 'fbdev-v4.18' of git://github.com/bzolnier/linux: (26 commits)
fb_omap2: add gpiolib dependency
video/omap: add module license tags
MAINTAINERS: make omapfb orphan
video: fbdev: pxafb: match_string() conversion fixup
video: fbdev: nvidia: fix spelling mistake: "scaleing" -> "scaling"
video: fbdev: fix spelling mistake: "frambuffer" -> "framebuffer"
video: fbdev: pxafb: Convert to use match_string() helper
video: fbdev: via: allow COMPILE_TEST build
video: fbdev: remove unused sh_mobile_meram driver
drm: shmobile: remove unused MERAM support
video: fbdev: sh_mobile_lcdcfb: remove unused MERAM support
video: fbdev: remove unused auo_k190xfb drivers
video: omap: Improve a size determination in omapfb_do_probe()
video: sm501fb: Improve a size determination in sm501fb_probe()
video: fbdev-MMP: Improve a size determination in path_init()
video: fbdev-MMP: Delete an error message for a failed memory allocation in two functions
video: auo_k190x: Delete an error message for a failed memory allocation in auok190x_common_probe()
video: sh_mobile_lcdcfb: Delete an error message for a failed memory allocation in two functions
video: sh_mobile_meram: Delete an error message for a failed memory allocation in sh_mobile_meram_probe()
video: fbdev: sh_mobile_meram: Drop SUPERH platform dependency
...
Linus Torvalds [Sat, 16 Jun 2018 07:32:04 +0000 (16:32 +0900)]
Merge branch 'afs-proc' of git://git./linux/kernel/git/viro/vfs
Pull AFS updates from Al Viro:
"Assorted AFS stuff - ended up in vfs.git since most of that consists
of David's AFS-related followups to Christoph's procfs series"
* 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
afs: Optimise callback breaking by not repeating volume lookup
afs: Display manually added cells in dynamic root mount
afs: Enable IPv6 DNS lookups
afs: Show all of a server's addresses in /proc/fs/afs/servers
afs: Handle CONFIG_PROC_FS=n
proc: Make inline name size calculation automatic
afs: Implement network namespacing
afs: Mark afs_net::ws_cell as __rcu and set using rcu functions
afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus()
proc: Add a way to make network proc files writable
afs: Rearrange fs/afs/proc.c to remove remaining predeclarations.
afs: Rearrange fs/afs/proc.c to move the show routines up
afs: Rearrange fs/afs/proc.c by moving fops and open functions down
afs: Move /proc management functions to the end of the file
Linus Torvalds [Sat, 16 Jun 2018 07:21:50 +0000 (16:21 +0900)]
Merge branch 'work.compat' of git://git./linux/kernel/git/viro/vfs
Pull compat updates from Al Viro:
"Some biarch patches - getting rid of assorted (mis)uses of
compat_alloc_user_space().
Not much in that area this cycle..."
* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
orangefs: simplify compat ioctl handling
signalfd: lift sigmask copyin and size checks to callers of do_signalfd4()
vmsplice(): lift importing iovec into vmsplice(2) and compat counterpart
Linus Torvalds [Sat, 16 Jun 2018 07:11:40 +0000 (16:11 +0900)]
Merge branch 'work.aio' of git://git./linux/kernel/git/viro/vfs
Pull aio fixes from Al Viro:
"Assorted AIO followups and fixes"
* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
eventpoll: switch to ->poll_mask
aio: only return events requested in poll_mask() for IOCB_CMD_POLL
eventfd: only return events requested in poll_mask()
aio: mark __aio_sigset::sigmask const
Linus Torvalds [Fri, 15 Jun 2018 22:39:34 +0000 (07:39 +0900)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Various netfilter fixlets from Pablo and the netfilter team.
2) Fix regression in IPVS caused by lack of PMTU exceptions on local
routes in ipv6, from Julian Anastasov.
3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia.
4) Don't crash on poll in TLS, from Daniel Borkmann.
5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things
including Avahi mDNS. From Bart Van Assche.
6) Missing of_node_put in qcom/emac driver, from Yue Haibing.
7) We lack checking of the TCP checking in one special case during SYN
receive, from Frank van der Linden.
8) Fix module init error paths of mac80211 hwsim, from Johannes Berg.
9) Handle 802.1ad properly in stmmac driver, from Elad Nachman.
10) Must grab HW caps before doing quirk checks in stmmac driver, from
Jose Abreu.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
net: stmmac: Run HWIF Quirks after getting HW caps
neighbour: skip NTF_EXT_LEARNED entries during forced gc
net: cxgb3: add error handling for sysfs_create_group
tls: fix waitall behavior in tls_sw_recvmsg
tls: fix use-after-free in tls_push_record
l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
mlxsw: spectrum_switchdev: Fix port_vlan refcounting
mlxsw: spectrum_router: Align with new route replace logic
mlxsw: spectrum_router: Allow appending to dev-only routes
ipv6: Only emit append events for appended routes
stmmac: added support for 802.1ad vlan stripping
cfg80211: fix rcu in cfg80211_unregister_wdev
mac80211: Move up init of TXQs
mac80211_hwsim: fix module init error paths
cfg80211: initialize sinfo in cfg80211_get_station
nl80211: fix some kernel doc tag mistakes
hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload
rds: avoid unenecessary cong_update in loop transport
l2tp: clean up stale tunnel or session in pppol2tp_connect's error path
...
Linus Torvalds [Fri, 15 Jun 2018 22:36:39 +0000 (07:36 +0900)]
Merge tag 'modules-for-v4.18' of git://git./linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Minor code cleanup and also allow sig_enforce param to be shown in
sysfs with CONFIG_MODULE_SIG_FORCE"
* tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Allow to always show the status of modsign
module: Do not access sig_enforce directly
Linus Torvalds [Fri, 15 Jun 2018 21:50:51 +0000 (06:50 +0900)]
Merge branch 'for-linus-4.18-rc1' of git://git./linux/kernel/git/rw/uml
Pull uml updates from Richard Weinberger:
"Minor updates for UML:
- fixes for our new vector network driver by Anton
- initcall cleanup by Alexander
- We have a new mailinglist, sourceforge.net sucks"
* 'for-linus-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Fix raw interface options
um: Fix initialization of vector queues
um: remove uml initcalls
um: Update mailing list address
Linus Torvalds [Fri, 15 Jun 2018 21:42:43 +0000 (06:42 +0900)]
Merge tag 'riscv-for-linus-4.18-merge_window' of git://git./linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains some small RISC-V updates I'd like to target for 4.18.
They are all fairly small this time. Here's a short summary, there's
more info in the commits/merges:
- a fix to __clear_user to respect the passed arguments.
- enough support for the perf subsystem to work with RISC-V's ISA
defined performance counters.
- support for sparse and cleanups suggested by it.
- support for R_RISCV_32 (a relocation, not the 32-bit ISA).
- some MAINTAINERS cleanups.
- the addition of CONFIG_HVC_RISCV_SBI to our defconfig, as it's
always present.
I've given these a simple build+boot test"
* tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig
RISC-V: Handle R_RISCV_32 in modules
riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't set
riscv: add riscv-specific predefines to CHECKFLAGS
riscv: split the declaration of __copy_user
riscv: no __user for probe_kernel_address()
riscv: use NULL instead of a plain 0
perf: riscv: Add Document for Future Porting Guide
perf: riscv: preliminary RISC-V support
MAINTAINERS: Update Albert's email, he's back at Berkeley
MAINTAINERS: Add myself as a maintainer for SiFive's drivers
riscv: Fix the bug in memory access fixup code
Linus Torvalds [Fri, 15 Jun 2018 21:37:04 +0000 (06:37 +0900)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"Mostly the PPC part of the release, but also switching to Arnd's fix
for the hyperv config issue and a typo fix.
Main PPC changes:
- reimplement the MMIO instruction emulation
- transactional memory support for PR KVM
- improve radix page table handling"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (63 commits)
KVM: x86: VMX: redo fix for link error without CONFIG_HYPERV
KVM: x86: fix typo at kvm_arch_hardware_setup comment
KVM: PPC: Book3S PR: Fix failure status setting in tabort. emulation
KVM: PPC: Book3S PR: Enable use on POWER9 bare-metal hosts in HPT mode
KVM: PPC: Book3S PR: Don't let PAPR guest set MSR hypervisor bit
KVM: PPC: Book3S PR: Fix failure status setting in treclaim. emulation
KVM: PPC: Book3S PR: Fix MSR setting when delivering interrupts
KVM: PPC: Book3S PR: Handle additional interrupt types
KVM: PPC: Book3S PR: Enable kvmppc_get/set_one_reg_pr() for HTM registers
KVM: PPC: Book3S: Remove load/put vcpu for KVM_GET_REGS/KVM_SET_REGS
KVM: PPC: Remove load/put vcpu for KVM_GET/SET_ONE_REG ioctl
KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl
KVM: PPC: Book3S PR: Enable HTM for PR KVM for KVM_CHECK_EXTENSION ioctl
KVM: PPC: Book3S PR: Support TAR handling for PR KVM HTM
KVM: PPC: Book3S PR: Add guard code to prevent returning to guest with PR=0 and Transactional state
KVM: PPC: Book3S PR: Add emulation for tabort. in privileged state
KVM: PPC: Book3S PR: Add emulation for trechkpt.
KVM: PPC: Book3S PR: Add emulation for treclaim.
KVM: PPC: Book3S PR: Restore NV regs after emulating mfspr from TM SPRs
KVM: PPC: Book3S PR: Always fail transactions in guest privileged state
...
Linus Torvalds [Fri, 15 Jun 2018 21:35:02 +0000 (06:35 +0900)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio, vhost: features, fixes
- PCI virtual function support for virtio
- DMA barriers for virtio strong barriers
- bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: update the comments for transport features
virtio_pci: support enabling VFs
vhost: fix info leak due to uninitialized memory
virtio_ring: switch to dma_XX barriers for rpmsg
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:34:32 +0000 (12:34 -0300)]
fix a series of Documentation/ broken file name references
As files move around, their previous links break. Fix the
references for them.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:33:06 +0000 (12:33 -0300)]
Documentation: rstFlatTable.py: fix a broken reference
The old HOWTO was removed a long time ago. The flat table
version is not metioned elsewhere, so just get rid of the
text.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:32:05 +0000 (12:32 -0300)]
ABI: sysfs-devices-system-cpu: remove a broken reference
This file doesn't exist anymore:
Documentation/cpu-freq/user-guide.txt
As the ABI already points to Documentation/cpu-freq, just
remove the broken link and the associated text.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:30:30 +0000 (12:30 -0300)]
devicetree: fix a series of wrong file references
As files got renamed, their references broke.
Manually fix a series of broken refs at the DT bindings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:24:41 +0000 (12:24 -0300)]
devicetree: fix name of pinctrl-bindings.txt
Rename:
pinctrl-binding.txt -> pinctrl-bindings.txt
In order to match the current name of this file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 12:39:01 +0000 (09:39 -0300)]
devicetree: fix some bindings file names
There were some file movements that changed the location for
some DT bindings. Fix them with:
scripts/documentation-file-ref-check --fix
After manually checking if the new file makes sense.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 11:59:37 +0000 (08:59 -0300)]
MAINTAINERS: fix location of DT npcm files
The specified locations are not right. Fix the wildcard logic
to point to the correct directories.
Without that, get-maintainer won't get things right:
$ ./scripts/get_maintainer.pl --no-git-fallback --no-r --no-n --no-l -f Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
mark.rutland@arm.com (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
After the patch, it will properly point to NPCM arch maintainers:
$ ./scripts/get_maintainer.pl --no-git-fallback --no-r --no-n --no-l -f Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
avifishman70@gmail.com (supporter:ARM/NUVOTON NPCM ARCHITECTURE)
tmaimon77@gmail.com (supporter:ARM/NUVOTON NPCM ARCHITECTURE)
robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
mark.rutland@arm.com (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Cc: Patrick Venture <venture@google.com>
Cc: Nancy Yuen <yuenn@google.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 11:01:00 +0000 (08:01 -0300)]
MAINTAINERS: fix location of some display DT bindings
Those files got a manufacturer's name prepended and were moved around.
Adjust their references accordingly.
Also, due those movements, Documentation/devicetree/bindings/video
doesn't exist anymore.
Cc: David Airlie <airlied@linux.ie>
Cc: David Lechner <david@lechnology.com>
Cc: Peter Senna Tschudin <peter.senna@collabora.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@nxp.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:43:07 +0000 (07:43 -0300)]
kernel-parameters.txt: fix pointers to sound parameters
The alsa parameters file was renamed to alsa-configuration.rst.
With regards to OSS, it got retired as a hole by at changeset
727dede0ba8a ("sound: Retire OSS"). So, it doesn't make sense
to keep mentioning it at kernel-parameters.txt.
Fixes:
727dede0ba8a ("sound: Retire OSS")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:18:45 +0000 (07:18 -0300)]
bindings: nvmem/zii: Fix location of nvmem.txt
The location pointed there is missing "bindings/" on its path.
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Tue, 8 May 2018 18:14:57 +0000 (15:14 -0300)]
docs: Fix more broken references
As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix
Manually checked that produced results are valid.
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 14:06:08 +0000 (11:06 -0300)]
scripts/documentation-file-ref-check: check tools/*/Documentation
Some files, like tools/memory-model/README has references to
a Documentation file that is locale to it. Handle references
that are relative to them too.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 13:47:29 +0000 (10:47 -0300)]
scripts/documentation-file-ref-check: get rid of false-positives
Now that the number of broken refs are smaller, improve the logic
that gets rid of false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 13:14:54 +0000 (10:14 -0300)]
scripts/documentation-file-ref-check: hint: dash or underline
Sometimes, people use dash instead of underline or vice-versa.
Try to autocorrect it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 12:36:35 +0000 (09:36 -0300)]
scripts/documentation-file-ref-check: add a fix logic for DT
There are several links broken due to DT file movements. Add
a hint logic to seek for those changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:48:22 +0000 (07:48 -0300)]
scripts/documentation-file-ref-check: accept more wildcards at filenames
at MAINTAINERS, some filename paths use '?' and things like [7,9].
So, accept more wildcards, in order to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:11:02 +0000 (07:11 -0300)]
scripts/documentation-file-ref-check: fix help message
The name of the --fix option was renamed, but it was not
changed at the quick help message.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:34:51 +0000 (07:34 -0300)]
media: max2175: fix location of driver's companion documentation
There's a missing ".rst" at the doc's file name.
Acked-by: Ramesh Shanmugasundaram <Ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Tue, 8 May 2018 22:41:44 +0000 (19:41 -0300)]
media: v4l: fix broken video4linux docs locations
There are several places pointing to old documentation files:
Documentation/video4linux/API.html
Documentation/video4linux/bttv/
Documentation/video4linux/cx2341x/fw-encoder-api.txt
Documentation/video4linux/m5602.txt
Documentation/video4linux/v4l2-framework.txt
Documentation/video4linux/videobuf
Documentation/video4linux/Zoran
Make them point to the new location where available, removing
otherwise.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Tue, 8 May 2018 21:29:30 +0000 (18:29 -0300)]
media: dvb: point to the location of the old README.dvb-usb file
This file got renamed, but the references still point to the
old place.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Tue, 8 May 2018 21:10:05 +0000 (18:10 -0300)]
media: dvb: fix location of get_dvb_firmware script
This script was moved out of Documentation/dvb, but the
links weren't updated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Tue, 8 May 2018 18:14:57 +0000 (15:14 -0300)]
docs: Fix some broken references
As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix
Manually checked if the produced result is valid, removing a few
false-positives.
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Tue, 8 May 2018 21:54:36 +0000 (18:54 -0300)]
docs: fix broken references with multiple hints
The script:
./scripts/documentation-file-ref-check --fix
Gives multiple hints for broken references on some files.
Manually use the one that applies for some files.
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Jose Abreu [Fri, 15 Jun 2018 15:17:27 +0000 (16:17 +0100)]
net: stmmac: Run HWIF Quirks after getting HW caps
Currently we were running HWIF quirks before getting HW capabilities.
This is not right because some HWIF callbacks depend on HW caps.
Lets save the quirks callback and use it in a later stage.
This fixes Altera socfpga.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Fixes:
5f0456b43140 ("net: stmmac: Implement logic to automatically select HW Interface")
Reported-by: Dinh Nguyen <dinh.linux@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu [Wed, 13 Jun 2018 04:26:10 +0000 (21:26 -0700)]
neighbour: skip NTF_EXT_LEARNED entries during forced gc
Commit
9ce33e46531d ("neighbour: support for NTF_EXT_LEARNED flag")
added support for NTF_EXT_LEARNED for neighbour entries.
NTF_EXT_LEARNED entries are neigh entries managed by control
plane (eg: Ethernet VPN implementation in FRR routing suite).
Periodic gc already excludes these entries. This patch extends
it to forced gc which the earlier patch missed.
Fixes:
9ce33e46531d ("neighbour: support for NTF_EXT_LEARNED flag")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhouyang Jia [Fri, 15 Jun 2018 03:06:17 +0000 (11:06 +0800)]
net: cxgb3: add error handling for sysfs_create_group
When sysfs_create_group fails, the lack of error-handling code may
cause unexpected results.
This patch adds error-handling code after calling sysfs_create_group.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Jun 2018 16:14:31 +0000 (09:14 -0700)]
Merge branch 'tls-fixes'
Daniel Borkmann says:
====================
Two tls fixes
First one is syzkaller trigered uaf and second one noticed
while writing test code with tls ulp. For details please see
individual patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 15 Jun 2018 01:07:46 +0000 (03:07 +0200)]
tls: fix waitall behavior in tls_sw_recvmsg
Current behavior in tls_sw_recvmsg() is to wait for incoming tls
messages and copy up to exactly len bytes of data that the user
provided. This is problematic in the sense that i) if no packet
is currently queued in strparser we keep waiting until one has been
processed and pushed into tls receive layer for tls_wait_data() to
wake up and push the decrypted bits to user space. Given after
tls decryption, we're back at streaming data, use sock_rcvlowat()
hint from tcp socket instead. Retain current behavior with MSG_WAITALL
flag and otherwise use the hint target for breaking the loop and
returning to application. This is done if currently no ctx->recv_pkt
is ready, otherwise continue to process it from our strparser
backlog.
Fixes:
c46234ebb4d1 ("tls: RX path for ktls")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 15 Jun 2018 01:07:45 +0000 (03:07 +0200)]
tls: fix use-after-free in tls_push_record
syzkaller managed to trigger a use-after-free in tls like the
following:
BUG: KASAN: use-after-free in tls_push_record.constprop.15+0x6a2/0x810 [tls]
Write of size 1 at addr
ffff88037aa08000 by task a.out/2317
CPU: 3 PID: 2317 Comm: a.out Not tainted 4.17.0+ #144
Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016
Call Trace:
dump_stack+0x71/0xab
print_address_description+0x6a/0x280
kasan_report+0x258/0x380
? tls_push_record.constprop.15+0x6a2/0x810 [tls]
tls_push_record.constprop.15+0x6a2/0x810 [tls]
tls_sw_push_pending_record+0x2e/0x40 [tls]
tls_sk_proto_close+0x3fe/0x710 [tls]
? tcp_check_oom+0x4c0/0x4c0
? tls_write_space+0x260/0x260 [tls]
? kmem_cache_free+0x88/0x1f0
inet_release+0xd6/0x1b0
__sock_release+0xc0/0x240
sock_close+0x11/0x20
__fput+0x22d/0x660
task_work_run+0x114/0x1a0
do_exit+0x71a/0x2780
? mm_update_next_owner+0x650/0x650
? handle_mm_fault+0x2f5/0x5f0
? __do_page_fault+0x44f/0xa50
? mm_fault_error+0x2d0/0x2d0
do_group_exit+0xde/0x300
__x64_sys_exit_group+0x3a/0x50
do_syscall_64+0x9a/0x300
? page_fault+0x8/0x30
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This happened through fault injection where aead_req allocation in
tls_do_encryption() eventually failed and we returned -ENOMEM from
the function. Turns out that the use-after-free is triggered from
tls_sw_sendmsg() in the second tls_push_record(). The error then
triggers a jump to waiting for memory in sk_stream_wait_memory()
resp. returning immediately in case of MSG_DONTWAIT. What follows is
the trim_both_sgl(sk, orig_size), which drops elements from the sg
list added via tls_sw_sendmsg(). Now the use-after-free gets triggered
when the socket is being closed, where tls_sk_proto_close() callback
is invoked. The tls_complete_pending_work() will figure that there's
a pending closed tls record to be flushed and thus calls into the
tls_push_pending_closed_record() from there. ctx->push_pending_record()
is called from the latter, which is the tls_sw_push_pending_record()
from sw path. This again calls into tls_push_record(). And here the
tls_fill_prepend() will panic since the buffer address has been freed
earlier via trim_both_sgl(). One way to fix it is to move the aead
request allocation out of tls_do_encryption() early into tls_push_record().
This means we don't prep the tls header and advance state to the
TLS_PENDING_CLOSED_RECORD before allocation which could potentially
fail happened. That fixes the issue on my side.
Fixes:
3c4d7559159b ("tls: kernel TLS support")
Reported-by: syzbot+5c74af81c547738e1684@syzkaller.appspotmail.com
Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Jun 2018 16:12:37 +0000 (09:12 -0700)]
Merge branch 'l2tp-l2tp_ppp-must-ignore-non-PPP-sessions'
Guillaume Nault says:
====================
l2tp: l2tp_ppp must ignore non-PPP sessions
The original L2TP code was written for version 2 of the protocol, which
could only carry PPP sessions. Then L2TPv3 generalised the protocol so that
it could transport different kinds of pseudo-wires. But parts of the
l2tp_ppp module still break in presence of non-PPP sessions.
Assuming L2TPv2 tunnels can only transport PPP sessions is right, but
l2tp_netlink failed to ensure that (fixed in patch 1).
When retrieving a session from an arbitrary tunnel, l2tp_ppp needs to
filter out non-PPP sessions (last occurrence fixed in patch 2).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Fri, 15 Jun 2018 13:39:19 +0000 (15:39 +0200)]
l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
pppol2tp_tunnel_ioctl() can act on an L2TPv3 tunnel, in which case
'session' may be an Ethernet pseudo-wire.
However, pppol2tp_session_ioctl() expects a PPP pseudo-wire, as it
assumes l2tp_session_priv() points to a pppol2tp_session structure. For
an Ethernet pseudo-wire l2tp_session_priv() points to an l2tp_eth_sess
structure instead, making pppol2tp_session_ioctl() access invalid
memory.
Fixes:
d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Fri, 15 Jun 2018 13:39:17 +0000 (15:39 +0200)]
l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
The /proc/net/pppol2tp handlers (pppol2tp_seq_*()) iterate over all
L2TPv2 tunnels, and rightfully expect that only PPP sessions can be
found there. However, l2tp_netlink accepts creating Ethernet sessions
regardless of the underlying tunnel version.
This confuses pppol2tp_seq_session_show(), which expects that
l2tp_session_priv() returns a pppol2tp_session structure. When the
session is an Ethernet pseudo-wire, a struct l2tp_eth_sess is returned
instead. This leads to invalid memory access when
pppol2tp_session_get_sock() later tries to dereference ps->sk.
Fixes:
d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Jun 2018 16:11:17 +0000 (09:11 -0700)]
Merge branch 'mlxsw-IPv6-and-reference-counting-fixes'
Ido Schimmel says:
====================
mlxsw: IPv6 and reference counting fixes
The first three patches fix a mismatch between the new IPv6 behavior
introduced in commit
f34436a43092 ("net/ipv6: Simplify route replace and
appending into multipath route") and mlxsw. The patches allow the driver
to support multipathing in IPv6 overlays with GRE tunnel devices. A
selftest will be submitted when net-next opens.
The last patch fixes a reference count problem of the port_vlan struct.
I plan to simplify the code in net-next, so that reference counting is
not necessary anymore.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Fri, 15 Jun 2018 13:23:38 +0000 (16:23 +0300)]
mlxsw: spectrum_switchdev: Fix port_vlan refcounting
Switchdev notifications for addition of SWITCHDEV_OBJ_ID_PORT_VLAN are
distributed not only on clean addition, but also when flags on an
existing VLAN are changed. mlxsw_sp_bridge_port_vlan_add() calls
mlxsw_sp_port_vlan_get() to get at the port_vlan in question, which
implicitly references the object. This then leads to discrepancies in
reference counting when the VLAN is removed. spectrum.c warns about the
problem when the module is removed:
[13578.493090] WARNING: CPU: 0 PID: 2454 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2973 mlxsw_sp_port_remove+0xfd/0x110 [mlxsw_spectrum]
[...]
[13578.627106] Call Trace:
[13578.629617] mlxsw_sp_fini+0x2a/0xe0 [mlxsw_spectrum]
[13578.634748] mlxsw_core_bus_device_unregister+0x3e/0x130 [mlxsw_core]
[13578.641290] mlxsw_pci_remove+0x13/0x40 [mlxsw_pci]
[13578.646238] pci_device_remove+0x31/0xb0
[13578.650244] device_release_driver_internal+0x14f/0x220
[13578.655562] driver_detach+0x32/0x70
[13578.659183] bus_remove_driver+0x47/0xa0
[13578.663134] pci_unregister_driver+0x1e/0x80
[13578.667486] mlxsw_sp_module_exit+0xc/0x3fa [mlxsw_spectrum]
[13578.673207] __x64_sys_delete_module+0x13b/0x1e0
[13578.677888] ? exit_to_usermode_loop+0x78/0x80
[13578.682374] do_syscall_64+0x39/0xe0
[13578.685976] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix by putting the port_vlan when mlxsw_sp_port_vlan_bridge_join()
determines it's a flag-only change.
Fixes:
b3529af6bb0d ("spectrum: Reference count VLAN entries")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 15 Jun 2018 13:23:37 +0000 (16:23 +0300)]
mlxsw: spectrum_router: Align with new route replace logic
Commit
f34436a43092 ("net/ipv6: Simplify route replace and appending
into multipath route") changed the IPv6 route replace logic so that the
first matching route (i.e., same metric) is replaced.
Have mlxsw replace the first matching route as well.
Fixes:
f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 15 Jun 2018 13:23:36 +0000 (16:23 +0300)]
mlxsw: spectrum_router: Allow appending to dev-only routes
Commit
f34436a43092 ("net/ipv6: Simplify route replace and appending
into multipath route") changed the IPv6 route append logic so that
dev-only routes can be appended and not only gatewayed routes.
Align mlxsw with the new behaviour.
Fixes:
f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 15 Jun 2018 13:23:35 +0000 (16:23 +0300)]
ipv6: Only emit append events for appended routes
Current code will emit an append event in the FIB notification chain for
any route added with NLM_F_APPEND set, even if the route was not
appended to any existing route.
This is inconsistent with IPv4 where such an event is only emitted when
the new route is appended after an existing one.
Align IPv6 behavior with IPv4, thereby allowing listeners to more easily
handle these events.
Fixes:
f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Jun 2018 16:08:26 +0000 (09:08 -0700)]
Merge tag 'mac80211-for-davem-2018-06-15' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A handful of fixes:
* missing RCU grace period enforcement led to drivers freeing
data structures before; fix from Dedy Lansky.
* hwsim module init error paths were messed up; fixed it myself
after a report from Colin King (who had sent a partial patch)
* kernel-doc tag errors; fix from Luca Coelho
* initialize the on-stack sinfo data structure when getting
station information; fix from Sven Eckelmann
* TXQ state dumping is now done from init, and when TXQs aren't
initialized yet at that point, bad things happen, move the
initialization; fix from Toke Høiland-Jørgensen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Elad Nachman [Fri, 15 Jun 2018 06:57:39 +0000 (09:57 +0300)]
stmmac: added support for 802.1ad vlan stripping
stmmac reception handler calls stmmac_rx_vlan() to strip the vlan before
calling napi_gro_receive().
The function assumes VLAN tagged frames are always tagged with
802.1Q protocol, and assigns ETH_P_8021Q to the skb by hard-coding
the parameter on call to __vlan_hwaccel_put_tag() .
This causes packets not to be passed to the VLAN slave if it was created
with 802.1AD protocol
(ip link add link eth0 eth0.100 type vlan proto 802.1ad id 100).
This fix passes the protocol from the VLAN header into
__vlan_hwaccel_put_tag() instead of using the hard-coded value of
ETH_P_8021Q.
NETIF_F_HW_VLAN_STAG_RX check was added and the strip action is now
dependent on the correct combination of features and the detected vlan tag.
NETIF_F_HW_VLAN_STAG_RX feature was added to be in line with the driver
actual abilities.
Signed-off-by: Elad Nachman <eladn@gilat.com>
Reviewed-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mauro Carvalho Chehab [Wed, 9 May 2018 02:44:08 +0000 (23:44 -0300)]
arch/*: Kconfig: fix documentation for NMI watchdog
Changeset
9919cba7ff71 ("watchdog: Update documentation") updated
the documentation, removing the old nmi_watchdog.txt and adding
a file with a new content.
Update Kconfig files accordingly.
Fixes:
9919cba7ff71 ("watchdog: Update documentation")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Sun, 6 May 2018 17:30:09 +0000 (14:30 -0300)]
docs: crypto_engine.rst: Fix two parse warnings
./Documentation/crypto/crypto_engine.rst:13: WARNING: Unexpected indentation.
./Documentation/crypto/crypto_engine.rst:15: WARNING: Block quote ends without a blank line; unexpected unindent.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Sun, 6 May 2018 15:00:11 +0000 (12:00 -0300)]
docs: can.rst: fix a footnote reference
As stated at:
http://www.sphinx-doc.org/en/master/usage/restructuredtext/basics.html#footnotes
A footnote should contain either a number, a reference or
an auto number, e. g.:
[1], [#f1] or [#].
While using [*] accidentaly works for html, it fails for other
document outputs. In particular, it causes an error with LaTeX
output, causing all books after networking to not be built.
So, replace it by a valid syntax.
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
David Howells [Fri, 15 Jun 2018 14:24:50 +0000 (15:24 +0100)]
afs: Optimise callback breaking by not repeating volume lookup
At the moment, afs_break_callbacks calls afs_break_one_callback() for each
separate FID it was given, and the latter looks up the volume individually
for each one.
However, this is inefficient if two or more FIDs have the same vid as we
could reuse the volume. This is complicated by cell aliasing whereby we
may have multiple cells sharing a volume and can therefore have multiple
callback interests for any particular volume ID.
At the moment afs_break_one_callback() scans the entire list of volumes
we're getting from a server and breaks the appropriate callback in every
matching volume, regardless of cell. This scan is done for every FID.
Optimise callback breaking by the following means:
(1) Sort the FID list by vid so that all FIDs belonging to the same volume
are clumped together.
This is done through the use of an indirection table as we cannot do
an insertion sort on the afs_callback_break array as we decode FIDs
into it as we subsequently also have to decode callback info into it
that corresponds by array index only.
We also don't really want to bubblesort afterwards if we can avoid it.
(2) Sort the server->cb_interests array by vid so that all the matching
volumes are grouped together. This permits the scan to stop after
finding a record that has a higher vid.
(3) When breaking FIDs, we try to keep server->cb_break_lock as long as
possible, caching the start point in the array for that volume group
as long as possible.
It might make sense to add another layer in that list and have a
refcounted volume ID anchor that has the matching interests attached
to it rather than being in the list. This would allow the lock to be
dropped without losing the cursor.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 15 Jun 2018 14:19:22 +0000 (15:19 +0100)]
afs: Display manually added cells in dynamic root mount
Alter the dynroot mount so that cells created by manipulation of
/proc/fs/afs/cells and /proc/fs/afs/rootcell and by specification of a root
cell as a module parameter will cause directories for those cells to be
created in the dynamic root superblock for the network namespace[*].
To this end:
(1) Only one dynamic root superblock is now created per network namespace
and this is shared between all attempts to mount it. This makes it
easier to find the superblock to modify.
(2) When a dynamic root superblock is created, the list of cells is walked
and directories created for each cell already defined.
(3) When a new cell is added, if a dynamic root superblock exists, a
directory is created for it.
(4) When a cell is destroyed, the directory is removed.
(5) These directories are created by calling lookup_one_len() on the root
dir which automatically creates them if they don't exist.
[*] Inasmuch as network namespaces are currently supported here.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 15 Jun 2018 14:19:10 +0000 (15:19 +0100)]
afs: Enable IPv6 DNS lookups
Remove the restriction on DNS lookup upcalls that prevents ipv6 addresses
from being looked up.
Signed-off-by: David Howells <dhowells@redhat.com>
Anatoliy Glagolev [Wed, 13 Jun 2018 21:38:51 +0000 (15:38 -0600)]
bsg: fix race of bsg_open and bsg_unregister
The existing implementation allows races between bsg_unregister and
bsg_open paths. bsg_unregister and request_queue cleanup and deletion
may start and complete right after bsg_get_device (in bsg_open path)
retrieves bsg_class_device and releases the mutex. Then bsg_open path
touches freed memory of bsg_class_device and request_queue.
One possible fix is to hold the mutex all the way through bsg_get_device
instead of releasing it after bsg_class_device retrieval.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-Off-By: Anatoliy Glagolev <glagolig@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 15 Jun 2018 11:55:07 +0000 (13:55 +0200)]
block: remov blk_queue_invalidate_tags
This function is entirely unused, so remove it and the tag_queue_busy
member of struct request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>