staging: brcm80211: rename fullmac protocol related functions

The fullmac functions for firmware communication protocol handling
have been renamed to make naming more consistent.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed BDC defines

Code cleanup. BDC (Broadcom Device Class) protocol extension is used on top
of the USB related CDC (Communication Device Class) definition. BDC is always
used, so the #ifdefs were redundant.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unused prototypes from dhd.h

A couple of prototypes are not defined or not used and have been
removed from the driver.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: rename fullmac functions

The function provided by dhd_linux.c have been renamed to make
the naming throughout the driver more consistent and remove
Broadcom specific acronyms which are not meaningful.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unnecessary abstraction for scheduler

The source dhd_linux_sched.c provided function setScheduler, but it
simply calls sched_setscheduler() linux function. The setScheduler()
function has been removed.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: rename module parameters

Fullmac source is renamed to be consistent throughout the driver. This
commit renames the modules parameters for module loading.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: rename event handling definition

Renaming fullmac to have more consistent naming throughout the
driver. This commit renames identifiers related to firmware event
handling.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replace macro BCM_MSG_IFNAME_MAX with IFNAMSIZ

In dhd.h the macro BCM_MSG_IFNAME_MAX was defined and used. As this
is used to carry the interface name we might as well use IFNAMSIZ
which results in the same size.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unused definitions from dhd.h

The header file dhd.h contained a number of macro definitions that
are not used within the driver and have been removed.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: rename ioctl command codes in dhd.h

The naming convention in the driver is to be aligned. This commit
changes the prefix used for the ioctl command codes.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: rename functions and variables in dhd_common.c

The naming convention of the drivers is to be made consistent. This
commit fixes the function in dhd_common.c and use the new names from
the calling code.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove extern function prototypes from c files

It is not recommended to specify function prototypes in c sources
using the extern keyword. Several occurrences have been removed or
placed in a header file or simply removed as it was already present
in a header file.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unused globals from dhd_common.c

Three global variable were defined but never used and have been
removed.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove dhd_set_timer function prototype

This function prototype is not implemented nor referenced in the
brcmfmac driver so it has been removed.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replaced prefix of SDIO related functions

Code cleanup. Prefixed functions with brcmf_ for unique namespace. In addition
to that, prefix has been changed to categorize functions depending on their
place in the drivers SDIO stack.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove wireless extensions support from brcmfmac

The brcmfmac driver contained functions for wireless extensions
support. However, brcmfmac is intended to be a cfg80211 driver
so all the entire source file is obsolete.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: correct bcmsdh_recv_buf() calls

The calls in dhd_sdio.c to bcmsdh_recv_buf() function passed a wrong
handle. The parameter in the function prototype was typed as void
pointer so compiler could not detect. This patch makes the type
explicit and fixes the calls to the function.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: reorg brcms_c_validboardtype for clarity

The structure of the function made it difficult to understand, so reorganize it
to make it clearer.

Reported-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unnecessary null check

kfree(NULL) is safe, and the rest of the cleanup should be done regardless
to make sure the state is consistent.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: flatten wlc_phy_shared_detach()

wlc_phy_shared_detach() is an unnecessary level of indirection to just
call kfree(), so replace the function with kfree().

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: add missing KERN_ facility level to printk()

Debug printk() call was missing KERN_DEBUG facility level.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: cleanup whitespace errors

Cleanup remaining whitespace errors:
- space before tabs
- spaces at the start of a line
- space between function name and open parenthesis '('
- unnecessary whitespace before a quoted newline

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: run scripts/cleanfile to remove whitespace errors

Used scripts/cleanfile to remove assorted whitespace errors.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: delete empty brcmfmac/README file

brcm80211/brcmfmac/README contents were move to brcm80211/README previously,
but this empty file is still around.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed unneeded 'if' statement

The 'if' is unnecessary, since no action is taken as a result of the test.

Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: Changed comments

Code cleanup. BCM4321 is not supported by this driver. Removed 'XXX' in
comments since they do not signal a critical issue to be patched. Removed
FIXME in comment since it signalled a problem in the Minstrel algorithm,
not in our driver.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: corrected tx status feedback for non AMPDU packets

Code still contained a 'FIXME' label that said tx status feedback (consumed by
the rate control algorithm) was not yet taking RTS/CTS into account.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: taking max AMPDU length advertized by peer into account

AP advertizes max AMPDU rx length in beacon/probe response frame. Code now
uses this information to limit the length of AMPDU frames it transmits.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: parsed ADDBA response ack window parameter

IEEE80211_AMPDU_TX_OPERATIONAL provides a BA window size parameter. Code
is now using this parameter to restrict the amount of outstanding tx
AMPDUs.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: move assert function to dhd_linux.c

The source file wl_iw.c is primarily intended to provide wireless
extensions functionality, which is to be removed from the driver.
The assert function is moved to another source file.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: get rid on IS_CFG80211_FAVORITE macro

cfg80211 module is always favorite for the brcmfmac driver so the
macro is not needed to know the answer.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove macro definition DRV_MODULE_NAME

The macro definition DRV_MODULE_NAME has exactly the same value as
KBUILD_MODNAME so using that instead now.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove macro FOREACH_AS_STA

The macro definition FOREACH_AS_STA does an assignment inside the
if condition, which is considered a checkpatch error. It has been
removed.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove chip simulation specific code

The driver contained several code paths specific to running the
driver against a simulated chip. This is not needed and removed.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unused macro definitions from pmu.c

The source file pmu.c contained a large number of definitions that
are no longer needed and have been removed.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove code from pmu.c related to unsupported chipsets

The pmu source file contains several code fragments for chipsets that
are not supported by this driver. These have been removed.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove otp power control functions

For the devices supported by brcmsmac driver the OTP device is always
powered. Functions for reading power status and changing it are not
needed.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unsupported chipset code from brcmsmac phy

the phy sources contained some code fragments for chipsets that are not
supported by this driver, which have been removed.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove code for unsupported chipsets from brcmsmac

The brcmsmac driver code contains code fragments for chipsets that are not
supported. These have been removed from the brcmsmac source files.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unused files from fullmac

aiutils.c and pcicfg.h are no longer needed by fullmac

Signed-off-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: move sdtxqlock codes to dhd_sdio.c

Move sdio specific tx queue lock codes to dhd_sdio.c for fullmac

Signed-off-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove empty sdrxqlock from fullmac

Remove empty lock functions for sdio rx queue

Signed-off-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unused sdtxlock from fullmac

Unused sdtx lock functions are removed from dhd_linux.c

Signed-off-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: make use of linux error codes in srom.c

The source file srom.c used meaningless non-zero numbers to return
upon error conditions. These have been replaced by linux error codes.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: minor cleanup in initvars_srom_pci()

The error handling code labelled with errout: did a conditional kfree(). The
last error jump to the label is upon failure of the kmalloc() for which the
conditional kfree() is done. Therefor, the kfree is moved before the error
label and done unconditionally.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove flash related code from initvars_srom_pci()

The function initvars_srom_pci() has fallback to obtain drivers settings
from flash when no srom device is present. However, this driver does not
support flash so the fallback code can be removed.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: brcmfmac: CONNECTING status bit is set at appropriate location

'WL_STATUS_CONNECTING' status bit is  set at appropriate step in bss/ibss
connect requests.

Signed-off-by: Sukesh Srikakula <sukeshs@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix checkpatch errors in types.h

The file types.h contains several occurrences of the checkpatch
error "(foo*)" should be "(foo *)". This has been fixed in this
patch.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: Remove se401 entry

Commit b287db119edb ("se401: remove last V4L1 driver")
removed the files, remove the entry.

cc: Hans Verkuil <hverkuil@xs4all.nl>
cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: Add STAGING - XGI Z7,Z9,Z11 PCI DISPLAY DRIVER

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: Add STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: Add STAGING - WINBOND IS89C35 WLAN USB DRIVER

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: Add STAGING - VIA VT665X DRIVERS

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: Add STAGING - SILICON MOTION SM7XX FRAME BUFFER DRIVER

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: Add STAGING - PARALLEL LCD/KEYPAD PANEL DRIVER

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: Add STAGING - INDUSTRIAL IO

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: Add STAGING - HYPER-V (MICROSOFT)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: Add STAGING - FRONTIER TRANZPORT AND ALPHATRACK

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: Add STAGING - ECHO CANCELLER

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: Add STAGING - CRYSTAL HD VIDEO DECODER

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: Add STAGING - COMEDI

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

MAINTAINERS: Add STAGING - ASUS OLED

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: das1800: fixed multiple brace coding style issues and pointer declaration style errors

Fixed coding style issues

Signed-off-by: Matthew Skolaut <tech2077@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: fix prink warning style issue in ni_daq_700.c

This is a patch to the ni_daq_700.c file that fixes up a prink  warning found by the checkpatch.pl tool

Signed-off-by: Ravishankar <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: fix comedi NI labpc driver build when ISA_DMA_API is not enabled

Fix ni_labpc.c to build when CONFIG_ISA_DMA_API is not enabled.

This is a driver that supports both ISA and PCI devices.
It now builds when for PCI-only support or for both
ISA and PCI device support.
(It does not support ISA-only without PCI.)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: comedi: fix infoleak to userspace

driver_name and board_name are pointers to strings, not buffers of size
COMEDI_NAMELEN.  Copying COMEDI_NAMELEN bytes of a string containing
less than COMEDI_NAMELEN-1 bytes would leak some unrelated bytes.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: usbdux: release locks on error paths

Smatch complains about a couple error paths where the semaphores
were not released.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: add dyna_pci10xx driver to Makefile

Add dyna_pci10xx entry to comedi Kconfig and Makefile

Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: add dyna_pci10xx driver

For Dynalog PCI DAQ cards:
  PCI-1050

Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: fix some white spaces in netvsc driver

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Remove unneeded version.h include from drivers/staging/hv/hv_timesource.c

It was pointed out by 'make versioncheck' that include of
linux/version.h is not needed in drivers/staging/hv/hv_timesource.c .
This patch removes it.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: vmbus: Properly handle the error in hv_acpi_init()

Properly handle the error in hv_acpi_init().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: netvsc: Fix a bug in accounting transmit slots

The transmit slots were manipulated without proper locking. Fix this bug by
making the variable tracking the transmit slots atomic.

This patch should be ported to prior stable kernels 2.6.32 and later.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: storvsc: Increase the timeout value in the storvsc driver

On some loaded windows hosts, we have discovered that the host may not
respond to guest requests within the specified time (one second)
as evidenced by the guest timing out. Fix this problem by increasing
the timeout to 5 seconds.

It may be useful to apply this patch to the 3.0 kernel as well.
the 3.0 kernel as well.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: netvsc: Increase the timeout value in the netvsc driver

On some loaded windows hosts, we have discovered that the host may not
respond to guest requests within the specified time (one second)
as evidenced by the guest timing out. Fix this problem by increasing
the timeout to 5 seconds.

It may be useful to apply this patch to the 3.0 kernel as well.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: vmbus: Increase the timeout value in the vmbus driver

On some loaded windows hosts, we have discovered that the host may not
respond to guest requests within the specified time (one second)
as evidenced by the guest timing out. Fix this problem by increasing
the timeout to 5 seconds.

It may be useful to apply this patch to the 3.0 kernel as well.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: remove reference to cs5535_gpio makefile

The driver was removed but 'make clean' still failed:

scripts/Makefile.clean:17:
[...]/drivers/staging/cs5535_gpio/Makefile: No such file or directory
make[3]: *** No rule to make target
`[...]/drivers/staging/cs5535_gpio/Makefile'.  Stop.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: fix build without backlight device support

gma500: fix build without backlight device support

Fix unmatched curly brackets when CONFIG_BACKLIGHT_CLASS_DEVICE is not
defined.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: power can be touched in IRQ state

So we need to use a spinlock here

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: Fix missing memory check

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: Workaround for Medfield/Cedarview cursor bug

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: Fix backlight crash

We need to check the NULL case earlier.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: Add the HDMI bits

This adds the basic HDMI support for Cedarview.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: begin adding CDV specific code

A lot of the intel_display stuff is duplicated, but we will add it first,
clean it up and then investigate the best way to merge stuff.

This first block integrates the various basic chunks of the CDV display setup.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: move the power header

At this point we now have the file naming making somewhat more sense
although the dependancies are not as clean as would be ideal

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: move the BIOS header

We can move this to patch up as well. Shuffle the relevant includes as we
go

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: tidying up the power stuff a spot

In particular don't destroy static mutexes, it upsets things

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: move the i2c code

This again is similar to upstream so give it a sensible name ready to look
at any merging or synchronization

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: the MMU code is also generic

Move this over. In actual fact there are some underlying differences as
some devices have more MMU contexts, but for our 2D purposes we don't
actually care.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: move opregion files

We've now sorted them out so they can go into the generic code. In actual
fact only the non MID devices use the functions but they are small and
having the name match i915 is going to help any future merging type work.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: tidy up the opregion and lid code

This is leaking an io mapping and also referencing stuff directly that
should not be directly accessed. Sort it out

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: Rename the psb_intel_bios code

This is generic for the PC class devices and also very similar to the i915
intel_bios.c so rename it. That way the commonality will be obvious and we
can look at merging them one day, or at least synching them up.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: begin the config based split

We don't want to carry all the extra gunk around on every device so use the
splitting work so far to tidy this up. Poulsbo is still mandatory as it is
used in bits by the other drivers and not neatly modularised.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: the GEM and GTT code is device independant

Rename the gem and gtt files accordingly.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: The 2D code is now also device independent

Rename

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: move framebuffer file

The framebuffer code is now clean of device specific code, and passes
checkpatch. Move it to its new name

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: tidy the framebuffer fixme and oddments

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: the 'mrst' BIOS is actually MID generic

Shuffle the naming so this reflects better and we can try and build some
sort of ordering to the naming scheme.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: Add the beginnings of Cedarview support

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

gma500: move configuration bits into the psb_ops structure

We can stuff things like the number of pipes and the SGX offset away in
here as well and clean up more conditional code.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>