OSDN Git Service
Nisheeth Bhat [Thu, 29 Sep 2011 14:10:10 +0000 (10:10 -0400)]
Fix calculation of number of pages in a PRP List
The existing calculation underestimated the number of pages required
as it did not take into account the pointer at the end of each page.
The replacement calculation may overestimate the number of pages required
if the last page in the PRP List is entirely full. By using ->npages
as a counter as we fill in the pages, we ensure that we don't try to
free a page that was never allocated.
Signed-off-by: Nisheeth Bhat <nisheeth.bhat@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Mon, 19 Sep 2011 21:08:14 +0000 (17:08 -0400)]
NVMe: Create nvme_identify and nvme_get_features functions
Instead of open-coding calls to nvme_submit_admin_cmd, these
small wrappers are simpler to use (the patch removes 14 lines from
nvme_dev_add() for example).
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Mon, 19 Sep 2011 21:14:53 +0000 (17:14 -0400)]
NVMe: Fix memory leak in nvme_dev_add()
The driver was allocating 8k of memory, then freeing 4k of it.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Nisheeth Bhat [Thu, 15 Sep 2011 20:52:24 +0000 (16:52 -0400)]
NVMe: Fix calls to dma_unmap_sg
dma_unmap_sg() must be called with the same 'nents' passed to
dma_map_sg(), not the number returned from dma_map_sg().
Signed-off-by: Nisheeth Bhat <nisheeth.bhat@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 13 Sep 2011 21:01:39 +0000 (17:01 -0400)]
NVMe: Correct sg list setup in nvme_map_user_pages
Our SG list was constructed to always fill the entire first page, even
if that was more than the length of the I/O. This is probably harmless,
but some IOMMUs might do something bad.
Correcting the first call to sg_set_page() made it look a lot closer to
the sg_set_page() in the loop, so fold the first call to sg_set_page()
into the loop.
Reported-by: Nisheeth Bhat <nisheeth.bhat@intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Matthew Wilcox [Tue, 9 Aug 2011 16:56:37 +0000 (12:56 -0400)]
Fix bug in NVME_IOCTL_SUBMIT_IO
Missing 'break' in the switch statement meant that we'd fall through
to the 'return -EINVAL' case.
Matthew Wilcox [Fri, 20 May 2011 17:03:42 +0000 (13:03 -0400)]
NVMe: Rework ioctls
Remove the special-purpose IDENTIFY, GET_RANGE_TYPE, DOWNLOAD_FIRMWARE
and ACTIVATE_FIRMWARE commands. Replace them with a generic ADMIN_CMD
ioctl that can submit any admin command.
Add a new ID ioctl that returns the namespace ID of the queried device.
It corresponds to the SCSI Idlun ioctl.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Fri, 20 May 2011 13:34:43 +0000 (09:34 -0400)]
NVMe: Add the nvme thread to the wait queue before waking it up
If the I/O was not completed by a single NVMe command, we add the
bio to the congestion list and wake up the kthread to resubmit it.
But the kthread calls remove_wait_queue() unconditionally, which
will oops if it's not on the wait queue. So add the kthread to
the wait queue before waking it up.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 11 May 2011 20:30:59 +0000 (13:30 -0700)]
NVMe: Return real error from nvme_create_queue
nvme_setup_io_queues() was assuming that a NULL return from
nvme_create_queue() was an out-of-memory error. That's not necessarily
true; the adapter might return -EIO, for example. Change the calling
convention to return an ERR_PTR on failure instead of NULL.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 12 May 2011 01:38:57 +0000 (21:38 -0400)]
NVMe: Version 0.6
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 12 May 2011 01:36:38 +0000 (21:36 -0400)]
NVMe: Add a few calling convention notes
For the benefit of reviewers, add comments to a few functions describing
their calling context
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 12 May 2011 17:51:41 +0000 (13:51 -0400)]
NVMe: Handle failures from memory allocations in nvme_setup_prps
If any of the memory allocations in nvme_setup_prps fail, handle it by
modifying the passed-in data length to reflect the number of bytes we are
actually able to send. Also allow the caller to specify the GFP flags
they need; for user-initiated commands, we can use GFP_KERNEL allocations.
The various callers are updated to handle this possibility; the main
I/O path is already prepared for this possibility (as it may happen
due to nvme_map_bio being unable to map all the segments of the I/O).
The other callers return -ENOMEM instead of doing partial I/Os.
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Fri, 6 May 2011 12:45:47 +0000 (08:45 -0400)]
NVMe: Use an IDA to allocate minor numbers
The current approach of using the namespace ID as the minor number
doesn't work when there are multiple adapters in the machine. Rather
than statically partitioning the number of namespaces between adapters,
dynamically allocate minor numbers to namespaces as they are detected.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Fri, 6 May 2011 12:37:54 +0000 (08:37 -0400)]
NVMe: Add include of delay.h for msleep
Previously it was being implicitly included through some other header file
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 12 May 2011 17:50:28 +0000 (13:50 -0400)]
NVMe: Add support for timing out I/Os
In the kthread, walk the list of outstanding I/Os and check they've not
hit the timeout.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Fri, 29 Apr 2011 06:17:36 +0000 (23:17 -0700)]
NVMe: Rename cancel_cmdid_data to cancel_cmdid
The trailing '_data' on the end was annoying and inconsistent. Also, make
it actually return the data since this is needed for timing out commands.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Fri, 29 Apr 2011 06:09:09 +0000 (23:09 -0700)]
NVMe: Fix bug in error handling
When an I/O completed with an error, we would call bio_endio twice
(once with -EIO and once with 0). Found by inspection.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 19 Apr 2011 19:04:20 +0000 (15:04 -0400)]
NVMe: Time out initialisation after a few seconds
THe device reports (in its capability register) how long it will take
to initialise. If that time elapses before the ready bit becomes set,
conclude the device is broken and refuse to initialise it. Log a nice
error message so the user knows why we did nothing.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Sun, 27 Mar 2011 12:52:06 +0000 (08:52 -0400)]
NVMe: Fix warning in free_irq
We need to clear the affinity mask before calling free_irq()
Reported-by: Shane Michael Matthews <shane.matthews@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 22 Mar 2011 19:55:45 +0000 (15:55 -0400)]
NVMe: Correct the Controller Configuration settings
The arbitration field was extended by one bit, shifting the shutdown
notification bits by one. Also, the SQ/CQ entry size was made
configurable for future extensions.
Reported-by: Paul Luse <paul.e.luse@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Mon, 21 Mar 2011 14:28:43 +0000 (10:28 -0400)]
NVMe: Version 0.5
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Mon, 21 Mar 2011 13:48:57 +0000 (09:48 -0400)]
NVMe: Change the definition of nvme_user_io
The read and write commands don't define a 'result', so there's no need
to copy it back to userspace.
Remove the ability of the ioctl to submit commands to a different
namespace; it's just asking for trouble, and the use case I have in mind
will be addressed througha different ioctl in the future. That removes
the need for both the block_shift and nsid arguments.
Check that the opcode is one of 'read' or 'write'. Future opcodes may
be added in the future, but we will need a different structure definition
for them.
The nblocks field is redefined to be 0-based. This allows the user to
request the full 65536 blocks.
Don't byteswap the reftag, apptag and appmask. Martin Petersen tells
me these are calculated in big-endian and are transmitted to the device
in big-endian.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Sun, 20 Mar 2011 11:27:10 +0000 (07:27 -0400)]
NVMe: Correct the definitions of two ioctls
NVME_IOCTL_SUBMIT_IO has a struct nvme_user_io, not a struct nvme_rw_command
as a parameter, and NVME_IOCTL_DOWNLOAD_FW is a Write, not a Read.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Sat, 19 Mar 2011 18:55:38 +0000 (14:55 -0400)]
NVMe: Add compat_ioctl
Make ioctls work for 32-bit applications on 64-bit kernels. The structures
are defined to be the same for both 32- and 64-bit applications, so
we can use the same handler for both.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 16 Mar 2011 20:52:19 +0000 (16:52 -0400)]
NVMe: Simplify queue lookup
Fill in all the num_possible_cpus() entries with duplicate pointers.
This reduces the complexity of the frequently-called get_nvmeq(), as
well as avoiding a bug in it when there are fewer queues than CPUs.
Reported-by: Shane Michael Matthews <shane.matthews@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 16 Mar 2011 20:45:49 +0000 (16:45 -0400)]
NVMe: Remove the kthread from the wait queue
Once there are no more bios on the congestion list, we can stop waking
up the nvme kthread every time a completion happens.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 16 Mar 2011 20:43:40 +0000 (16:43 -0400)]
NVMe: Fix off-by-one when filling in PRP lists
If the last element in the PRP list fits on the end of the page, there's
no need to allocate an extra page to put that single element in. It can
fit on the end of the page.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 16 Mar 2011 20:29:58 +0000 (16:29 -0400)]
NVMe: Fix interpretation of 'Number of Namespaces' field
The spec says this is a 0s based value. We don't need to handle the
maximal value because it's reserved to mean "every namespace".
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 16 Mar 2011 20:29:24 +0000 (16:29 -0400)]
NVMe: Remove outdated comments
The head can never overrun the tail since we won't allocate enough command
IDs to let that happen. The status codes are in sync with the spec.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 16 Mar 2011 20:29:00 +0000 (16:29 -0400)]
NVMe: Fix comment formatting
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 16 Mar 2011 20:28:24 +0000 (16:28 -0400)]
NVMe: Convert comments to kernel-doc notation
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Krzysztof Wierzbicki [Mon, 28 Feb 2011 07:27:13 +0000 (08:27 +0100)]
NVMe: Update admin opcodes to match the 1.0RC spec
Signed-off-by: Krzysztof Wierzbicki <krzysztof.wierzbicki@intel.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 24 Feb 2011 21:20:14 +0000 (16:20 -0500)]
NVMe: Version 0.4
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 24 Feb 2011 13:49:41 +0000 (08:49 -0500)]
NVMe: Reduce maximum queue depth by 1
The spec says we're not allowed to completely fill the submission queue.
Solve this by reducing the number of allocatable cmdids by 1.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 24 Feb 2011 13:46:00 +0000 (08:46 -0500)]
NVMe: Fix discontiguous accesses
When we submit subsequent portions of the I/O, we need to access the
updated block, not start reading again from the original position.
This was showing up as miscompares in the XFS randholes testcase.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 23 Feb 2011 20:20:00 +0000 (15:20 -0500)]
NVMe: Handle bios that contain non-virtually contiguous addresses
NVMe scatterlists must be virtually contiguous, like almost all I/Os.
However, when the filesystem lays out files with a hole, it can be that
adjacent LBAs map to non-adjacent virtual addresses. Handle this by
submitting one NVMe command at a time for each virtually discontiguous
range.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 22 Feb 2011 19:18:30 +0000 (14:18 -0500)]
NVMe: Implement Flush
Linux implements Flush as a bit in the bio. That means there may also be
data associated with the flush; if so the flush should be sent before the
data. To avoid completing the bio twice, I add CMD_CTX_FLUSH to indicate
the completion routine should do nothing.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 22 Feb 2011 19:15:34 +0000 (14:15 -0500)]
NVMe: Mark CMD_CTX_CANCELLED as being unlikely
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 16 Feb 2011 14:59:59 +0000 (09:59 -0500)]
NVMe: Correct SQ doorbell semantics
The value written to the doorbell needs to be the first free index in
the queue, not the most recently used index in the queue.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 15 Feb 2011 21:28:20 +0000 (16:28 -0500)]
NVMe: Let the kthread take care of devices earlier
If interrupts are misconfigured, the kthread will be needed to process
admin queue completions.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 15 Feb 2011 21:16:02 +0000 (16:16 -0500)]
NVMe: Rename nr_queues to nr_io_queues
I got confused about whether this included the admin queue or not, and
had to resort to reading the spec. It doesn't include the admin queue,
so make that clear in the name.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 15 Feb 2011 18:44:13 +0000 (13:44 -0500)]
NVMe: Remove setting of 'flags' in rw command
This was the data transfer bit until spec rev 0.92
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Mon, 14 Feb 2011 22:35:00 +0000 (17:35 -0500)]
NVMe: Release 0.3
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 2 Mar 2011 23:37:18 +0000 (18:37 -0500)]
NVMe: Add a kthread to handle the congestion list
Instead of trying to resubmit I/Os in the I/O completion path (in
interrupt context), wake up a kthread which will resubmit I/O from
user context. This allows mke2fs to run to completion.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Mon, 14 Feb 2011 20:55:33 +0000 (15:55 -0500)]
NVMe: Handle failures differently in nvme_submit_bio_queue()
Return -EBUSY if the queue is full or -ENOMEM if we failed to allocate
memory (or map a scatterlist). Also use GFP_ATOMIC to allocate the
nvme_bio and move the locking to the callers of nvme_submit_bio_queue().
In nvme_make_request(), don't permit an I/O to jump the queue -- if the
congestion list already has an entry, just add to the tail, rather than
trying to submit.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Mon, 14 Feb 2011 17:20:15 +0000 (12:20 -0500)]
NVMe: Update BAR structure to match the current spec
Add two reserved registers in the middle of the BAR to match the 1.0
spec plus ECN 0002.
Also rename IMC and ISC to INTMC and INTSC to conform with the spec.
We still don't need to use them :-)
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 10 Feb 2011 18:55:39 +0000 (13:55 -0500)]
NVMe: Handle physical merging of bvec entries
In order to not overrun the sg array, we have to merge physically
contiguous pages into a single sg entry.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 10 Feb 2011 17:01:09 +0000 (12:01 -0500)]
NVMe: Check for DMA mapping failure
If dma_map_sg returns 0 (failure), we need to fail the I/O.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 10 Feb 2011 15:47:55 +0000 (10:47 -0500)]
NVMe: Pass the nvme_dev to nvme_free_prps and nvme_setup_prps
We were passing the nvme_queue to access the q_dmadev for the
dma_alloc_coherent calls, but since we moved to the dma pool API,
we really only need the nvme_dev.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 10 Feb 2011 15:30:34 +0000 (10:30 -0500)]
NVMe: Optimise memory usage for I/Os between 4k and 128k
Add a second memory pool for smaller I/Os. We can pack 16 of these on a
single page instead of using an entire page for each one.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 10 Feb 2011 14:56:01 +0000 (09:56 -0500)]
NVMe: Switch to use DMA Pool API
Calling dma_free_coherent from interrupt context causes warnings.
Using the DMA pools delays freeing until pool destruction, so avoids
the problem.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 10 Feb 2011 14:03:06 +0000 (09:03 -0500)]
NVMe: Rename nvme_req_info to nvme_bio
There are too many things called 'info' in this driver. This data
structure is auxiliary information for a struct bio, so call it nvme_bio,
or nbio when used as a variable.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Shane Michael Matthews [Thu, 10 Feb 2011 13:51:24 +0000 (08:51 -0500)]
NVMe: Initial PRP List support
Add a pointer to the nvme_req_info to hold a new data structure
(nvme_prps) which contains a list of the pages allocated to this
particular request for holding PRP list entries. nvme_setup_prps()
now returns this pointer.
To allocate and free the memory used for PRP lists, we need a struct
device, so we need to pass the nvme_queue pointer to many functions
which didn't use to need it.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 10 Feb 2011 13:49:59 +0000 (08:49 -0500)]
NVMe: Advance the sg pointer when filling in an sg list
For multipage BIOs, we were always using sg[0] instead of advancing
through the list. Oops :-)
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Mon, 7 Feb 2011 20:55:59 +0000 (15:55 -0500)]
NVMe: Renumber the special context values
If POISON_POINTER_DELTA isn't defined, ensure they're in page 0 which
should never be mapped.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Mon, 7 Feb 2011 17:45:24 +0000 (12:45 -0500)]
NVMe: Handle the congestion list a little better
In the bio completion handler, check for bios on the congestion list
for this NVM queue. Also, lock the congestion list in the make_request
function as the queue may end up being shared between multiple CPUs.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Sun, 6 Feb 2011 23:30:16 +0000 (18:30 -0500)]
NVMe: Record the timeout for each command
In addition to recording the completion data for each command, record
the anticipated completion time. Choose a timeout of 5 seconds for
normal I/Os and 60 seconds for admin I/Os.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Sun, 6 Feb 2011 14:01:00 +0000 (09:01 -0500)]
NVMe: Need to lock queue during interrupt handling
If we're sharing a queue between multiple CPUs and we cancel a sync I/O,
we must have the queue locked to avoid corrupting the stack of the thread
that submitted the I/O. It turns out this is the same locking that's needed
for the threaded irq handler, so share that code.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Sun, 6 Feb 2011 13:51:15 +0000 (08:51 -0500)]
NVMe: Detect command IDs completing that are out of range
If the adapter completes a command ID that is outside the bounds of
the array, return CMD_CTX_INVALID instead of random data, and print a
message in the sync_completion handler (which is rapidly becoming the
misc completion handler :-)
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Sun, 6 Feb 2011 13:49:55 +0000 (08:49 -0500)]
NVMe: Detect commands that are completed twice
Set the context value to CMD_CTX_COMPLETED, and print a message in the
sync_completion handler if we see it.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Sun, 6 Feb 2011 12:53:23 +0000 (07:53 -0500)]
NVMe: Use a symbolic name to represent cancelled commands instead of 0
I have plans for other special values in sync_completion. Plus, this
is more self-documenting, and lets us detect bogus usages.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Sun, 6 Feb 2011 12:28:06 +0000 (07:28 -0500)]
NVMe: Add a module parameter to use a threaded interrupt
We're currently calling bio_endio from hard interrupt context. This is
not a good idea for preemptible kernels as it will cause longer latencies.
Using a threaded interrupt will run the entire queue processing mechanism
(including bio_endio) in a thread, which can be preempted. Unfortuantely,
it also adds about 7us of latency to the single-I/O case, so make it a
module parameter for the moment.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Fri, 4 Feb 2011 21:14:30 +0000 (16:14 -0500)]
NVMe: Call put_nvmeq() before calling nvme_submit_sync_cmd()
We can't have preemption disabled when we call schedule(). Accept the
possibility that we'll get preempted, and it'll cost us some cacheline
bounces.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Fri, 4 Feb 2011 21:03:56 +0000 (16:03 -0500)]
NVMe: Allow fatal signals to interrupt I/O
If the user sends a fatal signal, sleeping in the TASK_KILLABLE state
permits the task to be aborted. The only wrinkle is making sure that
if/when the command completes later that it doesn't upset anything.
Handle this by setting the data pointer to 0, and checking the value
isn't NULL in the sync completion path. Eventually, bios can be cancelled
through this path too. Note that the cmdid isn't freed to prevent reuse.
We should also abort the command in the future, but this is a good start.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 3 Feb 2011 19:36:07 +0000 (14:36 -0500)]
NVMe: Release 0.2
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 3 Feb 2011 15:58:26 +0000 (10:58 -0500)]
NVMe: Add download / activate firmware ioctls
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 3 Feb 2011 14:20:57 +0000 (09:20 -0500)]
NVMe: Add remaining status codes
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 1 Feb 2011 17:49:38 +0000 (12:49 -0500)]
NVMe: Move sysfs entries to the right place
Because I wasn't setting driverfs_dev, the devices were showing up under
/sys/devices/virtual/block. Now they appear underneath the PCI device
which they belong to.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Shane Michael Matthews [Tue, 1 Feb 2011 16:31:55 +0000 (11:31 -0500)]
NVMe: Disable the device before we write the admin queues
In case the card has been left in a partially-configured state,
write 0 to the Enable bit.
Signed-off-by: Shane Michael Matthews <shane.matthews@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 1 Feb 2011 21:24:35 +0000 (16:24 -0500)]
NVMe: Request I/O regions
Calling pci_request_selected_regions() reserves these regions for our use.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 1 Feb 2011 21:23:39 +0000 (16:23 -0500)]
NVMe: Allow queues to be allocated above 4GB
Need to call dma_set_coherent_mask() to allow queues to be allocated
above 4GB.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 1 Feb 2011 14:01:59 +0000 (09:01 -0500)]
NVMe: Enable device DMA
Need to call pci_set_master() to enable device DMA
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Shane Michael Matthews [Tue, 1 Feb 2011 13:49:30 +0000 (08:49 -0500)]
NVMe: Enable and disable the PCI device
Call pci_enable_device_mem() at initialisation and pci_disable_device
at exit.
Signed-off-by: Shane Michael Matthews <shane.matthews@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 1 Feb 2011 13:39:04 +0000 (08:39 -0500)]
NVMe: Check returns from nvme_alloc_queue()
It can return NULL, so handle that.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Mon, 31 Jan 2011 15:46:14 +0000 (10:46 -0500)]
NVMe: Remove 'node' from nvme_dev
We don't keep a list of nvme_dev any more
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 1 Feb 2011 21:18:08 +0000 (16:18 -0500)]
NVMe: Read the model, serial & firmware rev from the controller
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Tue, 1 Feb 2011 21:13:29 +0000 (16:13 -0500)]
NVMe: Add NVME_IOCTL_SUBMIT_IO
Allow userspace to submit synchronous I/O like the SCSI sg interface does.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 26 Jan 2011 22:05:50 +0000 (17:05 -0500)]
NVMe: Create nvme_map_user_pages() and nvme_unmap_user_pages()
These are generalisations of the code that was in
nvme_submit_user_admin_command().
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 26 Jan 2011 19:34:32 +0000 (14:34 -0500)]
NVMe: Change NVME_IOCTL_GET_RANGE_TYPE to return all the ranges
Factor out most of nvme_identify() into a new nvme_submit_user_admin_command()
function. Change nvme_get_range_type() to call it and change nvme_ioctl to
realise that it's getting back all 64 ranges.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 26 Jan 2011 15:08:25 +0000 (10:08 -0500)]
NVMe: Zero the command before we send it
Make sure there's no left-over bits set from previous commands that used
this slot.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 26 Jan 2011 15:02:29 +0000 (10:02 -0500)]
NVMe: Add nvme_setup_prps()
Generalise the code from nvme_identify() that sets PRP1 & PRP2 so that
it's usable for commands sent by nvme_submit_bio_queue().
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Wed, 26 Jan 2011 15:01:21 +0000 (10:01 -0500)]
NVMe: Make nvme_common_command more featureful
Add prp1, prp2 and the metadata prp to the common command, since the
fields are generally used this way.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Mon, 24 Jan 2011 12:52:07 +0000 (07:52 -0500)]
NVMe: Use PRP2 for the nvme_identify ioctl
DMA the result straight to userspace instead of bounce-buffering in the
kernel.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 20 Jan 2011 18:42:34 +0000 (13:42 -0500)]
NVMe: Fix admin IRQ claim on real hardware
The admin IRQ is supposed to use the pin-based (or single message MSI)
interrupt. Accomplish this by filling in entry[0]'s vector with the
INTx irq number.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 20 Jan 2011 18:24:06 +0000 (13:24 -0500)]
NVMe: Rename 'cycle' to 'phase'
It's called the phase bit in the current draft
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 20 Jan 2011 18:01:49 +0000 (13:01 -0500)]
NVMe: Implement per-CPU queues
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 20 Jan 2011 14:14:34 +0000 (09:14 -0500)]
NVMe: Reduce set_queue_count arguments by one
sq_count and cq_count are always the same, so just call it 'count'.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 20 Jan 2011 14:10:15 +0000 (09:10 -0500)]
NVMe: Factor out queue_request_irq()
Two callers with an almost identical long string of arguments, and
introducing a third soon. Time to factor out the commonalities.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Thu, 20 Jan 2011 17:50:14 +0000 (12:50 -0500)]
NVMe: New driver
This driver is for devices that follow the NVM Express standard
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Matthew Wilcox [Fri, 4 Nov 2011 19:41:27 +0000 (15:41 -0400)]
Xen: Export xen_biovec_phys_mergeable
When Xen is enabled, using BIOVEC_PHYS_MERGEABLE in a module
causes xen_biovec_phys_mergeable to be referenced, so it needs
to be exported.
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Linus Torvalds [Mon, 24 Oct 2011 07:10:05 +0000 (09:10 +0200)]
Linux 3.1
Linus Torvalds [Mon, 24 Oct 2011 05:08:24 +0000 (07:08 +0200)]
Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
intel-iommu: fix superpage support in pfn_to_dma_pte()
intel-iommu: set iommu_superpage on VM domains to lowest common denominator
intel-iommu: fix return value of iommu_unmap() API
MAINTAINERS: Update VT-d entry for drivers/pci -> drivers/iommu move
intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.
intel-iommu: Workaround IOTLB hang on Ironlake GPU
intel-iommu: Fix AB-BA lockdep report
Linus Torvalds [Mon, 24 Oct 2011 05:05:38 +0000 (07:05 +0200)]
Merge branch 'for-linus' of people.redhat.com/agk/git/linux-dm
* 'for-linus' of http://people.redhat.com/agk/git/linux-dm:
dm kcopyd: fix job_pool leak
Takashi Iwai [Sun, 23 Oct 2011 21:19:12 +0000 (23:19 +0200)]
x86: Fix S4 regression
Commit
4b239f458 ("x86-64, mm: Put early page table high") causes a S4
regression since 2.6.39, namely the machine reboots occasionally at S4
resume. It doesn't happen always, overall rate is about 1/20. But,
like other bugs, once when this happens, it continues to happen.
This patch fixes the problem by essentially reverting the memory
assignment in the older way.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Yinghai Lu <yinghai.lu@oracle.com>
[ We'll hopefully find the real fix, but that's too late for 3.1 now ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alasdair G Kergon [Sun, 23 Oct 2011 19:55:17 +0000 (20:55 +0100)]
dm kcopyd: fix job_pool leak
Fix memory leak introduced by commit
a6e50b409d3f9e0833e69c3c9cca822e8fa4adbb
(dm snapshot: skip reading origin when overwriting complete chunk).
When allocating a set of jobs from kc->job_pool, job->master_job must be
set (to point to itself) so that the mempool item gets freed when the
master_job completes.
master_job was introduced by commit
c6ea41fbbe08f270a8edef99dc369faf809d1bd6
(dm kcopyd: preallocate sub jobs to avoid deadlock)
Reported-by: Michael Leun <ml@newton.leun.net>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Linus Torvalds [Sun, 23 Oct 2011 07:44:40 +0000 (10:44 +0300)]
Merge branch 'samsung-fixes-4' of git://github.com/kgene/linux-samsung
* 'samsung-fixes-4' of git://github.com/kgene/linux-samsung:
ARM: S3C24XX: Fix s3c24xx build errors if !CONFIG_PM
ARM: S5P: fix offset calculation on gpio-interrupt
Linus Torvalds [Sun, 23 Oct 2011 07:43:31 +0000 (10:43 +0300)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (w83627ehf) Fix negative 8-bit temperature values
Domenico Andreoli [Fri, 21 Oct 2011 19:00:53 +0000 (04:00 +0900)]
ARM: S3C24XX: Fix s3c24xx build errors if !CONFIG_PM
v2:
- register_syscore_ops(&s3c24xx_irq_syscore_ops) does not need to be
conditionally compiled out, it is already optimized out on !CONFIG_PM
- fix also s3c2412 and s3c2416 affected by the same build issue
v1:
s3c2440.c fails to build if !CONFIG_PM because in such case
s3c2410_pm_syscore_ops is not defined. Same error should happen also
in s3c2410.c and s3c2442.c
Signed-off-by: Domenico Andreoli <cavokz@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Linus Torvalds [Fri, 21 Oct 2011 14:02:18 +0000 (17:02 +0300)]
Merge git://github.com/herbertx/crypto
* git://github.com/herbertx/crypto:
crypto: ghash - Avoid null pointer dereference if no key is set
Linus Torvalds [Fri, 21 Oct 2011 14:01:21 +0000 (17:01 +0300)]
Merge branch 'fix/hda' of git://github.com/tiwai/sound
* 'fix/hda' of git://github.com/tiwai/sound:
ALSA: HDA: conexant support for Lenovo T520/W520
ALSA: hda - Add position_fix quirk for Dell Inspiron 1010