OSDN Git Service
Jiang Lu [Fri, 21 Nov 2014 03:23:19 +0000 (11:23 +0800)]
powerpc/oprofile: Disable pagefaults during user stack read
A page fault occurred during reading user stack in oprofile backtrace
would lead following calltrace:
WARNING: at linux/kernel/smp.c:210
Modules linked in:
CPU: 5 PID: 736 Comm: sh Tainted: G W 3.14.23-WR7.0.0.0_standard #1
task:
c0000000f6208bc0 ti:
c00000007c72c000 task.ti:
c00000007c72c000
NIP:
c0000000000ed6e4 LR:
c0000000000ed5b8 CTR:
0000000000000000
REGS:
c00000007c72f050 TRAP: 0700 Tainted: G W (3.14.23-WR7.0.0
tandard)
MSR:
0000000080021000 <CE,ME> CR:
48222482 XER:
00000000
SOFTE: 0
GPR00:
c0000000000ed5b8 c00000007c72f2d0 c0000000010aa048 0000000000000005
GPR04:
c000000000fdb820 c00000007c72f410 0000000000000001 0000000000000005
GPR08:
c0000000010b5768 c000000000f8a048 0000000000000001 0000000000000000
GPR12:
0000000048222482 c00000000fffe580 0000000022222222 0000000010129664
GPR16:
0000000010143cc0 0000000000000000 0000000044444444 0000000000000000
GPR20:
c00000007c7221d8 c0000000f638e3c8 000003f15a20120d 0000000000000001
GPR24:
000000005a20120d c00000007c722000 c00000007cdedda8 00003fffef23b160
GPR28:
0000000000000001 c00000007c72f410 c000000000fdb820 0000000000000006
NIP [
c0000000000ed6e4] .smp_call_function_single+0x18c/0x248
LR [
c0000000000ed5b8] .smp_call_function_single+0x60/0x248
Call Trace:
[
c00000007c72f2d0] [
c0000000000ed5b8] .smp_call_function_single+0x60/0x248 (unreliable)
[
c00000007c72f3a0] [
c000000000030810] .__flush_tlb_page+0x164/0x1b0
[
c00000007c72f460] [
c00000000002e054] .ptep_set_access_flags+0xb8/0x168
[
c00000007c72f500] [
c0000000001ad3d8] .handle_mm_fault+0x4a8/0xbac
[
c00000007c72f5e0] [
c000000000bb3238] .do_page_fault+0x3b8/0x868
[
c00000007c72f810] [
c00000000001e1d0] storage_fault_common+0x20/0x44
Exception: 301 at .__copy_tofrom_user_base+0x54/0x5b0
LR = .op_powerpc_backtrace+0x190/0x20c
[
c00000007c72fb00] [
c000000000a2ec34] .op_powerpc_backtrace+0x204/0x20c (unreliable)
[
c00000007c72fbc0] [
c000000000a2b5fc] .oprofile_add_ext_sample+0xe8/0x118
[
c00000007c72fc70] [
c000000000a2eee0] .fsl_emb_handle_interrupt+0x20c/0x27c
[
c00000007c72fd30] [
c000000000a2e440] .op_handle_interrupt+0x44/0x58
[
c00000007c72fdb0] [
c000000000016d68] .performance_monitor_exception+0x74/0x90
[
c00000007c72fe30] [
c00000000001d8b4] exc_0x260_common+0xfc/0x100
performance_monitor_exception() is executed in a context with interrupt
disabled and preemption enabled. When there is a user space page fault
happened, do_page_fault() invoke in_atomic() to decide whether kernel
should handle such page fault. in_atomic() only check preempt_count.
So need call pagefault_disable() to disable preemption before reading
user stack.
Signed-off-by: Jiang Lu <lu.jiang@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Aneesh Kumar K.V [Mon, 3 Nov 2014 14:51:34 +0000 (20:21 +0530)]
powerpc/mm: Check for matching hpte without taking hpte lock
With smaller hash page table config, we would end up in situation
where we would be replacing hash page table slot frequently. In
such config, we will find the hpte to be not matching, and we
can do that check without holding the hpte lock. We need to
recheck the hpte again after holding lock.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Greg Kurz [Tue, 25 Nov 2014 16:10:06 +0000 (17:10 +0100)]
powerpc: Drop useless warning in eeh_init()
This is what we get in dmesg when booting a pseries guest and
the hypervisor doesn't provide EEH support.
[ 0.166655] EEH functionality not supported
[ 0.166778] eeh_init: Failed to call platform init function (-22)
Since both powernv_eeh_init() and pseries_eeh_init() already complain when
hitting an error, it is not needed to print more (especially such an
uninformative message).
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Mahesh Salgaonkar [Mon, 24 Nov 2014 16:29:26 +0000 (21:59 +0530)]
powerpc/powernv: Cleanup unused MCE definitions/declarations.
Cleanup OpalMCE_* definitions/declarations and other related code which
is not used anymore.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Benjamin Herrrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Gavin Shan [Sat, 22 Nov 2014 10:58:09 +0000 (21:58 +1100)]
powerpc/eeh: Dump PHB diag-data early
On PowerNV platform, PHB diag-data is dumped after stopping device
drivers. In case of recursive EEH errors, the kernel is usually
crashed before dumping PHB diag-data for the second EEH error. It's
hard to locate the root cause of the second EEH error without PHB
diag-data.
The patch adds one more EEH option "eeh=early_log", which helps
dumping PHB diag-data immediately once frozen PE is detected, in
order to get the PHB diag-data for the second EEH error.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Gavin Shan [Thu, 13 Nov 2014 23:47:30 +0000 (10:47 +1100)]
powerpc/eeh: Recover EEH error on ownership change for BCM5719
In PCI passthrou scenario, we need simulate EEH recovery for Emulex
adapters when their ownership changes, as we did in commit
5cfb20b96
("powerpc/eeh: Emulate EEH recovery for VFIO devices"). Broadcom
BCM5719 adpaters are facing same problem and needs same cure.
Reported-by: Rajeshkumar Subramanian <rajeshkumars@in.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Gavin Shan [Thu, 13 Nov 2014 23:47:29 +0000 (10:47 +1100)]
powerpc/eeh: Set EEH_PE_RESET on PE reset
The patch introduces additional flag EEH_PE_RESET to indicate the
corresponding PE is under reset. In turn, the PE retrieval bakcend
on PowerNV platform can return unfrozen state for the EEH core to
moving forward. Flag EEH_PE_CFG_BLOCKED isn't the correct one for
the purpose.
In PCI passthrou case, the problem is more worse: Guest doesn't
recover 6th EEH error. The PE is left in isolated (frozen) and
config blocked state on Broadcom adapters. We can't retrieve the
PE's state correctly any more, even from the host side via sysfs
/sys/bus/pci/devices/xxx/eeh_pe_state.
Reported-by: Rajeshkumar Subramanian <rajeshkumars@in.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Gavin Shan [Thu, 13 Nov 2014 23:47:28 +0000 (10:47 +1100)]
powerpc/eeh: Refactor eeh_reset_pe()
The patch refactors eeh_reset_pe() in order for:
* Varied return values for different failure cases.
* Replace pr_err() with pr_warn() and print function name.
* Coding style cleanup.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Michael Ellerman [Tue, 18 Nov 2014 05:58:15 +0000 (16:58 +1100)]
Merge remote-tracking branch 'scottwood/next' into next
Scott says:
"Highlights include a bunch of 8xx optimizations, device tree bindings
for Freescale BMan, QMan, and FMan datapath components, misc device tree
updates, and inbound rio window support."
Michael Neuling [Fri, 14 Nov 2014 07:09:28 +0000 (18:09 +1100)]
cxl: Name interrupts in /proc/interrupt
Currently all interrupts generated by cxl are named "cxl". This is not very
informative as we can't distinguish between cards, AFUs, error interrupts, user
contexts and user interrupts numbers. Being able to distinguish them is useful
for setting affinity.
This patch gives each of these names in /proc/interrupts.
A two card CAPI system, with afu0.0 having 2 active contexts each with 4 user
IRQs each, will now look like this:
% grep cxl /proc/interrupts
444: 0 OPAL ICS 141312 Level cxl-card1-err
445: 0 OPAL ICS 141313 Level cxl-afu1.0-err
446: 0 OPAL ICS 141314 Level cxl-afu1.0
462: 0 OPAL ICS 2052 Level cxl-afu0.0-pe0-1
463: 75517 OPAL ICS 2053 Level cxl-afu0.0-pe0-2
468: 0 OPAL ICS 2054 Level cxl-afu0.0-pe0-3
469: 0 OPAL ICS 2055 Level cxl-afu0.0-pe0-4
470: 0 OPAL ICS 2056 Level cxl-afu0.0-pe1-1
471: 75506 OPAL ICS 2057 Level cxl-afu0.0-pe1-2
472: 0 OPAL ICS 2058 Level cxl-afu0.0-pe1-3
473: 0 OPAL ICS 2059 Level cxl-afu0.0-pe1-4
502: 1066 OPAL ICS 2050 Level cxl-afu0.0
514: 0 OPAL ICS 2048 Level cxl-card0-err
515: 0 OPAL ICS 2049 Level cxl-afu0.0-err
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Fri, 14 Nov 2014 06:37:50 +0000 (17:37 +1100)]
cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning
If an AFU has a hardware bug that causes it to acknowledge a context
terminate or remove while that context has outstanding transactions, it
is possible for the kernel to receive an interrupt for that context
after we have removed it from the context list.
The kernel will not be able to demultiplex the interrupt (or worse - if
we have already reallocated the process handle we could mis-attribute it
to the new context), and printed a big scary warning.
It did not acknowledge the interrupt, which would effectively halt
further translation fault processing on the PSL.
This patch makes the warning clearer about the likely cause of the issue
(i.e. hardware bug) to make it obvious to future AFU designers of what
needs to be fixed. It also prints out the process handle which can then
be matched up with hardware and software traces for debugging.
It also acknowledges the interrupt to the PSL with either an address
error or acknowledge, so that the PSL can continue with other
translations.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Prabhakar Kushwaha [Fri, 31 Jan 2014 09:40:14 +0000 (15:10 +0530)]
powerpc/config: Enable memory driver
As Freescale IFC controller has been moved to driver to driver/memory.
So enable memory driver in powerpc config
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Neelesh Gupta [Tue, 14 Oct 2014 08:38:36 +0000 (14:08 +0530)]
rtc/tpo: Driver to support rtc and wakeup on PowerNV platform
The patch implements the OPAL rtc driver that binds with the rtc
driver subsystem. The driver uses the platform device infrastructure
to probe the rtc device and register it to rtc class framework. The
'wakeup' is supported depending upon the property 'has-tpo' present
in the OF node. It provides a way to load the generic rtc driver in
in the absence of an OPAL driver.
The patch also moves the existing OPAL rtc get/set time interfaces to the
new driver and exposes the necessary OPAL calls using EXPORT_SYMBOL_GPL.
Test results:
-------------
Host:
[root@tul169p1 ~]# ls -l /sys/class/rtc/
total 0
lrwxrwxrwx 1 root root 0 Oct 14 03:07 rtc0 -> ../../devices/opal-rtc/rtc/rtc0
[root@tul169p1 ~]# cat /sys/devices/opal-rtc/rtc/rtc0/time
08:10:07
[root@tul169p1 ~]# echo `date '+%s' -d '+ 2 minutes'` > /sys/class/rtc/rtc0/wakealarm
[root@tul169p1 ~]# cat /sys/class/rtc/rtc0/wakealarm
1413274345
[root@tul169p1 ~]#
FSP:
$ smgr mfgState
standby
$ rtim timeofday
System time is valid: 2014/10/14 08:12:04.225115
$ smgr mfgState
ipling
$
CC: devicetree@vger.kernel.org
CC: tglx@linutronix.de
CC: rtc-linux@googlegroups.com
CC: a.zummo@towertech.it
Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Vineeth Vijayan [Fri, 14 Nov 2014 09:12:05 +0000 (14:42 +0530)]
powerpc: Use generic PIE randomization
Back in 2009 we merged
501cb16d3cfd "Randomise PIEs", which added support for
randomizing PIE (Position Independent Executable) binaries.
That commit added randomize_et_dyn(), which correctly randomized the addresses,
but failed to honor PF_RANDOMIZE. That means it was not possible to disable PIE
randomization via the personality flag, or /proc/sys/kernel/randomize_va_space.
Since then there has been generic support for PIE randomization added to
binfmt_elf.c, selectable via ARCH_BINFMT_ELF_RANDOMIZE_PIE.
Enabling that allows us to drop randomize_et_dyn(), which means we start
honoring PF_RANDOMIZE correctly.
It also causes a fairly major change to how we layout PIE binaries.
Currently we will place the binary at 512MB-520MB for 32 bit binaries, or
512MB-1.5GB for 64 bit binaries, eg:
$ cat /proc/$$/maps
4e550000-
4e580000 r-xp
00000000 08:02 129813 /bin/dash
4e580000-
4e590000 rw-p
00020000 08:02 129813 /bin/dash
10014110000-
10014140000 rw-p
00000000 00:00 0 [heap]
3fffaa3f0000-
3fffaa5a0000 r-xp
00000000 08:02 921 /lib/powerpc64le-linux-gnu/libc-2.19.so
3fffaa5a0000-
3fffaa5b0000 rw-p
001a0000 08:02 921 /lib/powerpc64le-linux-gnu/libc-2.19.so
3fffaa5c0000-
3fffaa5d0000 rw-p
00000000 00:00 0
3fffaa5d0000-
3fffaa5f0000 r-xp
00000000 00:00 0 [vdso]
3fffaa5f0000-
3fffaa620000 r-xp
00000000 08:02 1246 /lib/powerpc64le-linux-gnu/ld-2.19.so
3fffaa620000-
3fffaa630000 rw-p
00020000 08:02 1246 /lib/powerpc64le-linux-gnu/ld-2.19.so
3ffffc340000-
3ffffc370000 rw-p
00000000 00:00 0 [stack]
With this commit applied we don't do any special randomisation for the binary,
and instead rely on mmap randomisation. This means the binary ends up at high
addresses, eg:
$ cat /proc/$$/maps
3fff99820000-
3fff999d0000 r-xp
00000000 08:02 921 /lib/powerpc64le-linux-gnu/libc-2.19.so
3fff999d0000-
3fff999e0000 rw-p
001a0000 08:02 921 /lib/powerpc64le-linux-gnu/libc-2.19.so
3fff999f0000-
3fff99a00000 rw-p
00000000 00:00 0
3fff99a00000-
3fff99a20000 r-xp
00000000 00:00 0 [vdso]
3fff99a20000-
3fff99a50000 r-xp
00000000 08:02 1246 /lib/powerpc64le-linux-gnu/ld-2.19.so
3fff99a50000-
3fff99a60000 rw-p
00020000 08:02 1246 /lib/powerpc64le-linux-gnu/ld-2.19.so
3fff99a60000-
3fff99a90000 r-xp
00000000 08:02 129813 /bin/dash
3fff99a90000-
3fff99aa0000 rw-p
00020000 08:02 129813 /bin/dash
3fffc3de0000-
3fffc3e10000 rw-p
00000000 00:00 0 [stack]
3fffc55e0000-
3fffc5610000 rw-p
00000000 00:00 0 [heap]
Although this should be OK, it's possible it might break badly written
binaries that make assumptions about the address space layout.
Signed-off-by: Vineeth Vijayan <vvijayan@mvista.com>
[mpe: Rewrite changelog]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Wed, 12 Nov 2014 02:36:11 +0000 (13:36 +1100)]
powerpc/powernv: Fix potential zero devisor
If there're no PHBs under P5IOC2 HUB device tree node, we should
bail early to avoid zero devisor and allocating TCE tables.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Wed, 12 Nov 2014 02:36:10 +0000 (13:36 +1100)]
powerpc/powernv: Bail upon invalid master PE
When freezing compound PEs in pnv_ioda_freeze_pe(), we should bail
upon illegal master PE. We needn't freeze slave PE because it should
have been put into frozen state by hardware.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Wed, 12 Nov 2014 02:36:09 +0000 (13:36 +1100)]
powerpc/powernv: Simplify pnv_ioda_configure_pe()
Nested if statements are always bad and the patch avoids one by
checking PHB type and bail in advance if necessary.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Wed, 12 Nov 2014 02:36:08 +0000 (13:36 +1100)]
powerpc/powernv: Set PELTV for compound PEs
Commit
262af55 ("powerpc/powernv: Enable M64 aperatus for PHB3")
introduced compound PEs in order to support M64 aperatus on PHB3.
However, we never configured PELTV for compound PEs. The patch
fixes that by: parent PE can freeze all child compound PEs. Any
compound PE affects the group.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Wed, 12 Nov 2014 02:36:07 +0000 (13:36 +1100)]
powerpc/powernv: Initialize M64 PE in time
The patch initializes PE instance when reserving PE number to
keep consistent things as we did before. Also, it replaces the
iteration on bridge's windows with the prefered way.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Wed, 12 Nov 2014 02:36:06 +0000 (13:36 +1100)]
powerpc/powernv: Rename alloc_m64_pe() to reserve_m64_pe()
The patch renames alloc_m64_pe() to reserve_m64_pe() to reflect
its real usage: We reserve PE numbers for M64 segments in advance
and then pick up the reserved PE numbers when building the mapping
between PE numbers and M64 segments.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Wed, 12 Nov 2014 02:36:05 +0000 (13:36 +1100)]
powerpc/powernv: Fix condition to remove M64
The M64 resource should be removed if we don't have hook to
initialize it, or (not and) fail to do that.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Wed, 12 Nov 2014 02:36:04 +0000 (13:36 +1100)]
powerpc/powernv: Check PHB type in advance
The patch checks PHB type a bit early to save a bit cycles
for P7 because we don't support M64 for P7IOC no matter what
OPAL firmware we have.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Wed, 5 Nov 2014 16:27:41 +0000 (21:57 +0530)]
powerpc/mm: Switch to generic RCU get_user_pages_fast
This patch switch the ppc arch to use the generic RCU based
gup implementation.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Wed, 5 Nov 2014 16:27:40 +0000 (21:57 +0530)]
mm: Update generic gup implementation to handle hugepage directory
Update generic gup implementation with powerpc specific details.
On powerpc at pmd level we can have hugepte, normal pmd pointer
or a pointer to the hugepage directory.
Tested-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Wed, 5 Nov 2014 16:27:39 +0000 (21:57 +0530)]
powerpc/mm: Add missing pmd accessors
This patch add documentation and missing accessors.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V [Sun, 2 Nov 2014 14:32:42 +0000 (20:02 +0530)]
powerpc: Disable CPU_FTR_TM if TM is disabled by firmware
Firmware is allowed to communicate to us via the "ibm,pa-features" property
that TM (Transactional Memory) support is disabled.
Currently this doesn't happen on any platform we're aware of, but we should
honor it anyway.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Martijn de Gouw [Tue, 5 Aug 2014 13:52:32 +0000 (15:52 +0200)]
powerpc/fsl-rio: add support for mapping inbound windows
Add support for mapping and unmapping of inbound rapidio windows. This
allows for drivers to open up a part of local memory on the rapidio
network. Also applications can use this and tranfer blocks of data
over the network.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
[scottwood@freescale.com: updated commit message based on review]
Signed-off-by: Scott Wood <scottwood@freescale.com>
Scott Wood [Fri, 7 Nov 2014 02:56:07 +0000 (20:56 -0600)]
powerpc/fsl: Update fman dt binding with clock name and qbman link
The clock name "fmanclk" was given in the example, but not specified
in the binding itself. Made clock-names mandatory as otherwise there's
not much point having it.
Added a reference to the fsl,qman and fsl,bman properties proposed
in http://patchwork.ozlabs.org/patch/407034/ and
http://patchwork.ozlabs.org/patch/407035/
Signed-off-by: Scott Wood <scottwood@freescale.com>
Igal Liberman [Wed, 17 Sep 2014 11:08:30 +0000 (14:08 +0300)]
powerpc/fsl: Frame Manager Device Tree binding document
The Frame Manager (FMan) combines the Ethernet network interfaces with
packet distribution logic to provide intelligent distribution and
queuing decisions for incoming traffic at line rate.
This binding document describes Freescale's Frame Manager hardware
attributes that are used by the Frame Manager driver for its basic
initialization and configuration.
Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Emil Medve [Wed, 5 Nov 2014 15:18:54 +0000 (09:18 -0600)]
dt/bindings: Introduce the FSL QorIQ DPAA QMan portal(s)
Portals are memory mapped interfaces to QMan that allow low-latency,
lock-less interaction by software running on processor cores,
accelerators and network interfaces with the QMan
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I29764fa8093b5ce65460abc879446795c50d7185
Signed-off-by: Scott Wood <scottwood@freescale.com>
Emil Medve [Wed, 5 Nov 2014 15:18:53 +0000 (09:18 -0600)]
dt/bindings: Introduce the FSL QorIQ DPAA QMan
The Queue Manager is part of the Data-Path Acceleration Architecture
(DPAA). QMan supports queuing and QoS scheduling of frames to CPUs,
network interfaces and DPAA logic modules, maintains packet ordering
within flows. Besides providing flow-level queuing, is also
responsible for congestion management functions such as RED/WRED,
congestion notifications and tail discards. This binding covers the
CCSR space programming model
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I3acb223893e42003d6c9dc061db568ec0b10d29b
Signed-off-by: Scott Wood <scottwood@freescale.com>
Emil Medve [Wed, 5 Nov 2014 15:18:52 +0000 (09:18 -0600)]
dt/bindings: Introduce the FSL QorIQ DPAA BMan portal(s)
Portals are memory mapped interfaces to BMan that allow low-latency,
lock-less interaction by software running on processor cores,
accelerators and network interfaces with the BMan
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I6d245ffc14ba3d0e91d403ac7c3b91b75a9e6a95
Signed-off-by: Scott Wood <scottwood@freescale.com>
Emil Medve [Wed, 5 Nov 2014 15:18:51 +0000 (09:18 -0600)]
dt/bindings: Introduce the FSL QorIQ DPAA BMan
The Buffer Manager is part of the Data-Path Acceleration Architecture
(DPAA). BMan supports hardware allocation and deallocation of buffers
belonging to pools originally created by software with configurable
depletion thresholds. This binding covers the CCSR space programming
model
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I3ec479bfb3c91951e96902f091f5d7d2adbef3b2
Signed-off-by: Scott Wood <scottwood@freescale.com>
Michael Ellerman [Wed, 12 Nov 2014 05:54:54 +0000 (16:54 +1100)]
powerpc/xmon: Fix build when 4xx=y and 44x=n
dump_tlb_44x() is only defined when 44x=y, but the ifdef in xmon.c
checks for 4xx, leading to a build failure:
arch/powerpc/xmon/xmon.c:912:4: error: implicit declaration of function 'dump_tlb_44x'
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 12 Nov 2014 05:33:35 +0000 (16:33 +1100)]
Merge branch 'topic/opal-ipmi' into next
Boqun Feng [Tue, 11 Nov 2014 04:50:22 +0000 (12:50 +0800)]
powerpc: Fix comment typos in arch/powerpc/include/asm/bitops.h
In arch/powerpc/include/asm/bitops.h, the comments about bit numbers in
large (> 1 word) bitmaps have two typos:
- On ppc64 system, the LSB of the 4th word should be bit 192 rather than
196, because if it's bit 196, bit 192-195 will be missing in the
bitmap.
- On ppc32 system, the LSB of the second word should be bit 32 rather
than 31, because bit 31 is already in the first word.
This patch fixes these typos.
Signed-off-by: Boqun Feng <boqun.feng@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Jeremy Kerr [Thu, 6 Nov 2014 03:38:27 +0000 (11:38 +0800)]
powerpc/powernv: Add OPAL IPMI interface
Recent OPAL firmare adds a couple of functions to send and receive IPMI
messages:
https://github.com/open-power/skiboot/commit/
b2a374da
This change updates the token list and wrappers to suit, and adds the
platform devices for any IPMI interfaces.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 3 Nov 2014 04:46:43 +0000 (15:46 +1100)]
powerpc: Fix compilation of emulate_step()
Commit
be96f63375a1 ("powerpc: Split out instruction analysis
part of emulate_step()") added some calls to do_fp_load()
and do_fp_store(), which fail to compile on configs with
CONFIG_PPC_FPU=n and CONFIG_PPC_EMULATE_SSTEP=y. This fixes
the compile by adding #ifdef CONFIG_PPC_FPU around the code
that calls these functions.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Suresh E. Warrier [Mon, 3 Nov 2014 04:46:42 +0000 (15:46 +1100)]
powerpc: Save/restore PPR for KVM hypercalls
The system call FLIH (first-level interrupt handler) at 0xc00
unconditionally sets hardware priority to medium. For hypercalls, this
means we lose guest OS priority. The front end (do_kvm_0x**) to the
KVM interrupt handler always assumes that PPR priority is saved in
PACA exception save area, so it copies this to the kvm_hstate
structure. For hypercalls, this would be the saved priority from any
previous exception. Eventually, the guest gets resumed with an
incorrect priority.
The fix is to save the PPR priority in PACA exception save area before
switching HMT priorities in the FLIH so that existing code described above
in the KVM interrupt handler can copy it from there into the VCPU's saved
context.
Signed-off-by: Suresh Warrier <warrier@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
[mpe: Dropped HMT_MEDIUM_PPR_DISCARD and reworded comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Wed, 12 Nov 2014 02:29:28 +0000 (13:29 +1100)]
powerpc/mm: Use PAGE_FACTOR
PAGE_FACTOR was defined to reflect the difference between configured
page size and fixed 4KB page size. Replace (PAGE_SHIFT - HW_PAGE_SHIFT)
with PAGE_FACTOR.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Mon, 10 Nov 2014 22:12:28 +0000 (09:12 +1100)]
powerpc: Fix bad NULL pointer check in udbg_uart_getc_poll()
We have some code in udbg_uart_getc_poll() that tries to protect
against a NULL udbg_uart_in, but gets it all wrong.
Found with the LLVM static analyzer (scan-build).
Fixes:
309257484cc1 ("powerpc: Cleanup udbg_16550 and add support for LPC PIO-only UARTs")
Signed-off-by: Anton Blanchard <anton@samba.org>
[mpe: Add some newlines for readability while we're here]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Julia Lawall [Fri, 8 Aug 2014 10:07:48 +0000 (12:07 +0200)]
powerpc/gamecube/wii: delete unneeded test before of_node_put
Simplify the error path to avoid calling of_node_put when it is not needed.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Julia Lawall [Fri, 8 Aug 2014 10:07:47 +0000 (12:07 +0200)]
powerpc/pseries: delete unneeded test before of_node_put
Of_node_put supports NULL as its argument, so the initial test is not
necessary.
Suggested by Uwe Kleine-König.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e;
@@
-if (e)
of_node_put(e);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Julia Lawall [Fri, 8 Aug 2014 10:07:46 +0000 (12:07 +0200)]
powerpc/mpc5xxx: delete unneeded test before of_node_put
Of_node_put supports NULL as its argument, so the initial test is not
necessary.
Suggested by Uwe Kleine-König.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e;
@@
-if (e)
of_node_put(e);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Julia Lawall [Fri, 8 Aug 2014 10:07:45 +0000 (12:07 +0200)]
powerpc/fsl: fsl_soc: delete unneeded test before of_node_put
Of_node_put supports NULL as its argument, so the initial test is not
necessary.
Suggested by Uwe Kleine-König.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e;
@@
-if (e)
of_node_put(e);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Julia Lawall [Fri, 8 Aug 2014 10:07:44 +0000 (12:07 +0200)]
powerpc/4xx/cpm: delete unneeded test before of_node_put
Simplify the error path to avoid calling of_node_put when it is not needed.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Sun, 2 Nov 2014 21:34:01 +0000 (08:34 +1100)]
powerpc/pseries: Quieten relocation on exceptions warning
The H_SET_MODE hcall returns H_P2 if a function is not implemented
and all callers should handle this case.
The call to enable relocation on exceptions currently prints an error
message if the feature is not implemented. While H_SET_MODE was
first introduced on POWER8 (which has relocation on exceptions), it
has been now added on some POWER7 configurations (which does not).
Check for H_P2 and print an informational message instead.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Sun, 2 Nov 2014 21:18:06 +0000 (08:18 +1100)]
powerpc/pseries: Quieten ibm,pcie-link-speed-stats warning
The ibm,pcie-link-speed-stats isn't mandatory, so we shouldn't print
a high priority error message when missing. One example where we see
this is QEMU.
Reduce it to pr_debug.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Fri, 31 Oct 2014 03:47:27 +0000 (14:47 +1100)]
powerpc: LLVM complains about forward declaration of struct rtas_sensors
Move the declaration up to silence the warning.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Fri, 31 Oct 2014 03:47:26 +0000 (14:47 +1100)]
powerpc: Remove double braces in alignment code.
Looks like I introduced this when adding LE support.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Fri, 31 Oct 2014 03:47:25 +0000 (14:47 +1100)]
powerpc: Don't use local named register variable in current_thread_info
LLVM doesn't support local named register variables and is unlikely
to. current_thread_info is using one, fix it by moving it out and
calling it __current_r1().
I gave it a bit of an obscure name because we don't want anyone else
using it - they should use current_stack_pointer(). This specific
case is performance critical and we can't afford to call a function
to get it. Furthermore it isn't important to know exactly where in
the stack we are since we mask the lower bits.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Mon, 27 Oct 2014 09:56:14 +0000 (20:56 +1100)]
powerpc: Remove unused vgacon_remap_base & fix build break
The build is broken with CONFIG_PPC32=y, CONFIG_FB_VGA16=y and
CONFIG_VGA_CONSOLE=n.
The problem is that vgacon_remap_base is not defined. It's used in:
#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base)
Which is used in the vga16fb.c code.
Digging down it seems vgacon_remap_base is never initialised. It used to
be, back in arch/ppc (pplus.c and prep_setup.c), but none of that code
ever made it to arch/powerpc.
So given it's been unused for >6 years, remove it.
Whether vga16fb.c works on 32-bit is another question, but this patch
shouldn't affect it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Thu, 30 Oct 2014 04:43:43 +0000 (15:43 +1100)]
powerpc/jump_label: Use HAVE_JUMP_LABEL
Commit
d4fe0965e208 ("powerpc/jump_label: use HAVE_JUMP_LABEL?")
missed a few conversions. Change the remaining uses of
CONFIG_JUMP_LABEL to HAVE_JUMP_LABEL.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Simon Kagstrom [Tue, 28 Oct 2014 11:19:00 +0000 (12:19 +0100)]
powerpc/boot: Parse chosen/cmdline-timeout parameter
On some platforms a 5 second timeout during boot might be quite long, so
make it configurable. Run the loop at least once to let the user stop
the boot by holding a key pressed. If the timeout is set to 0, don't
wait for input, which can be used as a workaround if the boot hangs on
random data coming in on the serial port.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
[mpe: Changelog wording & whitespace]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 6 Aug 2014 08:26:28 +0000 (18:26 +1000)]
powerpc: Remove unused CPU_FTRS_A2
In commit
fb5a515704d7 "Remove platforms/wsp and associated pieces" we
removed the last user of CPU_FTRS_A2, so we should remove it too.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Thu, 23 Oct 2014 05:35:14 +0000 (16:35 +1100)]
powerpc: Remove CPU_FTR_HVMODE from CPU_FTRS_ALWAYS
We potentially clear CPU_FTR_HVMODE at runtime in __init_hvmode_206(),
so we must make sure it's not set in CPU_FTRS_ALWAYS.
This doesn't hurt us in practice at the moment, because we don't support
compiling only for CPUs that support CPU_FTR_HVMODE.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Jiri Slaby [Tue, 29 Apr 2014 07:24:06 +0000 (09:24 +0200)]
powerpc/ftrace: Fix obsolete comment
CONFIG_MCOUNT is not defined anymore, the corresponding #ifdef there
is CONFIG_FUNCTION_TRACER.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kyle McMartin [Sat, 25 May 2013 16:54:25 +0000 (12:54 -0400)]
powerpc: Remove unused devm_ioremap_prot()
Added in 2008, but has never had any in-tree users, and no other
architectures provide it.
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Wed, 17 Sep 2014 07:07:04 +0000 (17:07 +1000)]
powerpc/ftrace: simplify prepare_ftrace_return
Instead of passing in the stack address of the link register
to be modified, just pass in the old value and return the
new value and rely on ftrace_graph_caller to do the
modification.
This removes the exception handling around the stack update -
it isn't needed and we weren't consistent about it. Later on
we would do an unprotected modification:
if (!ftrace_graph_entry(&trace)) {
*parent = old;
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Wed, 17 Sep 2014 07:07:03 +0000 (17:07 +1000)]
powerpc/ftrace: Remove mod_return_to_handler
mod_return_to_handler is the same as return_to_handler, except
it handles the change of the TOC (r2). Add this into
return_to_handler and remove mod_return_to_handler.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Wed, 17 Sep 2014 12:15:37 +0000 (22:15 +1000)]
powerpc: make __ffs return unsigned long
I'm seeing a build warning in mm/nobootmem.c after removing
bootmem:
mm/nobootmem.c: In function '__free_pages_memory':
include/linux/kernel.h:713:17: warning: comparison of distinct pointer types lacks a cast [enabled by default]
(void) (&_min1 == &_min2); \
^
mm/nobootmem.c:90:11: note: in expansion of macro 'min'
order = min(MAX_ORDER - 1UL, __ffs(start));
^
The rest of the worlds seems to define __ffs as returning unsigned long,
so lets do that.
Signed-off-by: Anton Blanchard <anton@samba.org>
Tested-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Wed, 17 Sep 2014 12:15:36 +0000 (22:15 +1000)]
powerpc: Move sparse_init() into initmem_init
We did part of sparse initialisation in setup_arch and part in
initmem_init. Put them together.
Signed-off-by: Anton Blanchard <anton@samba.org>
Tested-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Wed, 17 Sep 2014 12:15:35 +0000 (22:15 +1000)]
powerpc: Remove superfluous bootmem includes
Lots of places included bootmem.h even when not using bootmem.
Signed-off-by: Anton Blanchard <anton@samba.org>
Tested-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Wed, 17 Sep 2014 12:15:34 +0000 (22:15 +1000)]
powerpc: Remove some old bootmem related comments
Now bootmem is gone from powerpc we can remove comments mentioning it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Tested-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Wed, 17 Sep 2014 12:15:33 +0000 (22:15 +1000)]
powerpc: Remove bootmem allocator
At the moment we transition from the memblock alloctor to the bootmem
allocator. Gitting rid of the bootmem allocator removes a bunch of
complicated code (most of which I owe the dubious honour of being
responsible for writing).
Signed-off-by: Anton Blanchard <anton@samba.org>
Tested-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Emil Medve [Thu, 6 Nov 2014 15:48:13 +0000 (09:48 -0600)]
powerpc/dts: Add node(s) for the platform PLL
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: If76cd705a01813abe53396c1486bc13c4289ee92
Signed-off-by: Scott Wood <scottwood@freescale.com>
Emil Medve [Thu, 6 Nov 2014 15:48:12 +0000 (09:48 -0600)]
dt/bindings: qoriq-clock: Add binding for the platform PLL
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I7950afa9650d15ec7ce2cca89bb2a1e38586d4a5
Signed-off-by: Scott Wood <scottwood@freescale.com>
Emil Medve [Thu, 6 Nov 2014 15:48:11 +0000 (09:48 -0600)]
powerpc/dts: Factorize the clock control node
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I25ce24a25862b4ca460164159867abefe00ccdd1
Signed-off-by: Scott Wood <scottwood@freescale.com>
Hongtao Jia [Wed, 5 Nov 2014 06:59:53 +0000 (14:59 +0800)]
powerpc: Add INA220 to device tree for supported boards
Including: P3041DS P5020DS P5040DS B4QDS
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Hongtao Jia [Wed, 5 Nov 2014 06:59:52 +0000 (14:59 +0800)]
powerpc: Add ADT7461 to device tree for supported boards
Including: T104xRDB T208xQDS B4QDS
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Igal Liberman [Thu, 30 Oct 2014 09:15:47 +0000 (11:15 +0200)]
powerpc/fsl: Added rcw registers to global utility registers
The RCW registers are required for the future clock binding implementation.
Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com>
Change-Id: Ic36dd8bc2959aa7f97fb6fd7bbb8420822fef0a9
Signed-off-by: Scott Wood <scottwood@freescale.com>
Ashish Kumar [Tue, 7 Oct 2014 12:34:36 +0000 (18:04 +0530)]
powerpc/mpc85xx: Remove SPI and NAND partition from bsc9131rdb.dtsi
* Run "mtdparts default" on u-boot to create dynamic partitions
* Or use dynamic mtd partition with the help of bootargs in u-boot
Append bootargs with:
"mtdparts=
ff800000.flash:1m(nand_uboot),512K(nand_dtb),8m(nand_kernel),-(fs);\
spiff707000.0:1m(spi_uboot),4m(spi_kernel),512k(spi_dtb),-(fs)'"
Signed-off-by: Ashish Kumar <Ashish.Kumar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Paul Bolle [Wed, 24 Sep 2014 08:06:19 +0000 (10:06 +0200)]
powerpc/8xx: Remove Kconfig symbol FADS
Commit
39eb56da2b53 ("pcmcia: Remove m8xx_pcmcia driver") removed the
only driver that used CONFIG_FADS. Setting the Kconfig symbol FADS is
pointless since that commit. Remove it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Scott Wood <scottwood@freescale.com>
LEROY Christophe [Fri, 19 Sep 2014 08:36:10 +0000 (10:36 +0200)]
powerpc/8xx: Invalidate non present TLB as early as possible
8xx sometimes need to load a invalid/non-present TLBs in
it DTLB asm handler.
These must be invalidated separaly as linux mm doesn't.
Commit
5efab4a02c89c252fb4cce097aafde5f8208dbfe was invalidating them in
arch/powerpc/mm/fault.c.
This patch does the invalidation earlier in order to free the TLB as soon as
possible. This also has the advantage of removing some 8xx specific code from
fault.c
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
LEROY Christophe [Fri, 19 Sep 2014 08:36:10 +0000 (10:36 +0200)]
powerpc/8xx: Use DAR to save r3 for CPU6 ERRATA
As we are not using anymore DAR to save registers, it is now available for
saving the r3 register used for CPU6 ERRATA handling. Therefore we can
remove the major hack which was to use memory location 0 to save r3.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
LEROY Christophe [Fri, 19 Sep 2014 08:36:10 +0000 (10:36 +0200)]
powerpc/8xx: Don't restore regs to save them again.
There is not need to restore r10, r11 and cr registers at this end of ITLBmiss
handler as they are saved again to the same place in ITLBError handler we are
jumping to.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
LEROY Christophe [Fri, 19 Sep 2014 08:36:09 +0000 (10:36 +0200)]
powerpc/8xx: _PMD_PRESENT already set in level 1 entries
When a PMD entry is valid, _PMD_PRESENT is set. Therefore, forcing that bit
during TLB loading is useless.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
LEROY Christophe [Fri, 19 Sep 2014 08:36:09 +0000 (10:36 +0200)]
powerpc/8xx: set PTE bit 22 off TLBmiss
No need to re-set this bit at each TLB miss. Let's set it in the PTE.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
LEROY Christophe [Fri, 19 Sep 2014 08:36:09 +0000 (10:36 +0200)]
powerpc/8xx: Better readibility of ERRATA CPU6 handling
This patch hiddes that SPR address needed for CPU6 ERRATA handling in the macro.
Then we don't have to worry about this address directly in the code.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
LEROY Christophe [Fri, 19 Sep 2014 08:36:09 +0000 (10:36 +0200)]
powerpc/8xx: Implement 16k pages
This patch activates the handling of 16k pages on the MPC8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
LEROY Christophe [Fri, 19 Sep 2014 08:36:09 +0000 (10:36 +0200)]
powerpc/8xx: Const for TLB RPN forced value
Value 0x00f0 is used to force bits in TLB level 2 entry. This value is linked
to the page size and will vary when we change the page size. Lets define a const
for it in order to have it at only one place.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
LEROY Christophe [Fri, 19 Sep 2014 08:36:09 +0000 (10:36 +0200)]
powerpc/8xx: Use PAGE size related consts
For PAGE size related operations, use PAGE size consts in order to be able to
use different page size in the futur.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
LEROY Christophe [Fri, 19 Sep 2014 08:36:08 +0000 (10:36 +0200)]
powerpc/8xx: Don't use MD_TWC for walk
MD_TWC can only be used properly with 4k pages.
So lets calculate level 2 table index by ourselves.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
LEROY Christophe [Fri, 19 Sep 2014 08:36:08 +0000 (10:36 +0200)]
powerpc/8xx: Use M_TW instead of M_TWB
Use M_TW instead of M_TWB for storing Level 1 table address as M_TWB requires
4k aligned tables, which is only the case with 4k pages.
Consequently, we have to calculate the level 1 table index by ourselves.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
LEROY Christophe [Fri, 19 Sep 2014 08:36:08 +0000 (10:36 +0200)]
powerpc/8xx: No need to restore registers and save them again.
In DTLBError handler there is not need to restore r10, r11 and cr registers
after fixing DAR as they are saved again to the same place just after.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
LEROY Christophe [Fri, 19 Sep 2014 08:36:07 +0000 (10:36 +0200)]
powerpc/8xx: DataAccess exception not generated by MPC8xx
DataAccess exception is never generated by MPC8xx so do the job directly where
it is used to avoid an unnecessary branching.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
LEROY Christophe [Fri, 19 Sep 2014 08:36:06 +0000 (10:36 +0200)]
powerpc/8xx: exception InstructionAccess does not exist on MPC8xx
Exception InstructionAccess does not exist on MPC8xx. No need to branch there from somewhere else.
Handling can be done directly in InstructionTLBError Exception.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Anton Blanchard [Tue, 14 Oct 2014 11:17:47 +0000 (22:17 +1100)]
powerpc: Remove ppc_md.remove_memory
We have an extra level of indirection on memory hot remove which is not
matched on memory hot add. Memory hotplug is book3s only, so there is
no need for it.
This also enables means remove_memory() (ie memory hot unplug) works
on powernv.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Tue, 14 Oct 2014 01:24:35 +0000 (12:24 +1100)]
powerpc: Remove ppc64_boot_msg
ppc64_boot_msg is meant to be a boot debug aid, but
is only used in one spot. Get rid of it, and save
ourseleves a couple of lines in the kernel log
buffer.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Tue, 14 Oct 2014 00:40:26 +0000 (11:40 +1100)]
powerpc/pci: Quieten unset I/O resource warning
Newer POWER designs do not implement PCI I/O space, so we
expect to see a number of these.
Reduce the severity of the warning so it doesn't mask other
real issues.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Mon, 13 Oct 2014 09:27:15 +0000 (20:27 +1100)]
powerpc: Use probe_kernel_address in show_instructions
We really don't want to take a pagefault in show_instructions,
so use probe_kernel_address instead of __get_user.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 5 Nov 2014 10:00:31 +0000 (21:00 +1100)]
Merge branch 'topic/get-cpu-var' into next
Michael Ellerman [Wed, 5 Nov 2014 10:00:19 +0000 (21:00 +1100)]
Merge branch 'topic/pm-power-off' into next
Linus Torvalds [Tue, 4 Nov 2014 19:18:29 +0000 (11:18 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mpe/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes if you please"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
powerpc: use device_online/offline() instead of cpu_up/down()
powerpc/powernv: Properly fix LPC debugfs endianness
powerpc: do_notify_resume can be called with bad thread_info flags argument
powerpc/fadump: Fix endianess issues in firmware assisted dump handling
powerpc: Fix section mismatch warning
Linus Torvalds [Tue, 4 Nov 2014 19:12:25 +0000 (11:12 -0800)]
Merge tag 'ftracetest-3.18-rc1' of git://git./linux/kernel/git/rostedt/linux-trace
Pull ftracetest fix from Steven Rostedt:
"Running the ftracetests on a machine that had the debugfs file system
mounted in two locations caused the ftracetests to fail. This is
because the ftracetests script does a grep of the /proc/mounts file to
find where the debugfs file system is mounted. If it is mounted
twice, then the grep returns two lines instead of just one. This
causes the ftracetests to get confused and fail.
Use "head -1" to only return the first mount point for debugfs"
* tag 'ftracetest-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftracetest: Take the first debugfs mount found
Linus Torvalds [Tue, 4 Nov 2014 05:06:22 +0000 (21:06 -0800)]
Merge tag 'pinctrl-v3.18-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin-control fixes from Linus Walleij:
"This kernel cycle has been calm for both pin control and GPIO so far
but here are three pin control patches for you anyway, only really
dealing with Baytrail:
- Two fixes for the Baytrail driver affecting IRQs and output state
in sysfs
- Use the linux-gpio mailing list also for pinctrl patches"
* tag 'pinctrl-v3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: baytrail: show output gpio state correctly on Intel Baytrail
pinctrl: use linux-gpio mailing list
pinctrl: baytrail: Clear DIRECT_IRQ bit
Linus Torvalds [Tue, 4 Nov 2014 05:01:04 +0000 (21:01 -0800)]
Merge branch 'fixes-for-v3.18' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull CMA and DMA-mapping fixes from Marek Szyprowski:
"This contains important fixes for recently introduced highmem support
for default contiguous memory region used for dma-mapping subsystem"
* 'fixes-for-v3.18' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
mm, cma: make parameters order consistent in func declaration and definition
mm: cma: Use %pa to print physical addresses
mm: cma: Ensure that reservations never cross the low/high mem boundary
mm: cma: Always consider a 0 base address reservation as dynamic
mm: cma: Don't crash on allocation if CMA area can't be activated
Linus Torvalds [Mon, 3 Nov 2014 23:04:26 +0000 (15:04 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull ceph fixes from Sage Weil:
"There is a GFP flag fix from Mike Christie, an error code fix from
Jan, and fixes for two unnecessary allocations (kmalloc and workqueue)
from Ilya. All are well tested.
Ilya has one other fix on the way but it didn't get tested in time"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: eliminate unnecessary allocation in process_one_ticket()
rbd: Fix error recovery in rbd_obj_read_sync()
libceph: use memalloc flags for net IO
rbd: use a single workqueue for all devices
Linus Torvalds [Mon, 3 Nov 2014 22:09:33 +0000 (14:09 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k update from Geert Uytterhoeven.
Just wiring up the bpf system call.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Wire up bpf
Linus Torvalds [Mon, 3 Nov 2014 22:07:05 +0000 (14:07 -0800)]
Merge tag 'armsoc-for-rc3' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A surprisingly small batch of fixes for -rc3. Suspiciously small, I'd
say.
Anyway, most of this are a few defconfig updates. Some for omap to
deal with kernel binary size (moving ipv6 to module, etc). A larger
one for socfpga that refreshes with some churn, but also turns on a
few options that makes the newly-added board in my bootfarm usable for
testing.
OMAP3 will also now warn when booted with legacy (non-DT) boot
protocols, hopefully encouraging those who still care about some of
those platforms to submit DT support and report bugs where needed.
Nothing stops working though, this is just to warn for future
deprecation.
Beyond this, very few actual bugfixes. A PXA fix for DEBUG_LL boot
hangs, a missing terminting entry in a dt_match array on RealView a
MTD fix on OMAP with NAND"
[ Obviously missed rc3, will make rc4 instead ;) ]
* tag 'armsoc-for-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: drop list entry for davinci
ARM: OMAP2+: Warn about deprecated legacy booting mode
ARM: omap2plus_defconfig: Fix errors with NAND BCH
ARM: multi_v7_defconfig: fix support for APQ8084
soc: versatile: Add terminating entry for realview_soc_of_match
ARM: ixp4xx: remove compilation warnings in io.h
MAINTAINERS: Add Soren as reviewer for Zynq
ARM: omap2plus_defconfig: Fix bloat caused by having ipv6 built-in
ARM: socfpga_defconfig: Update defconfig for SoCFPGA
ARM: pxa: fix hang on startup with DEBUG_LL