OSDN Git Service
Thomas Huth [Mon, 30 Apr 2018 18:02:25 +0000 (20:02 +0200)]
net: Get rid of 'vlan' terminology and use 'hub' instead in the doc files
'vlan' is very confusing since it does not mean something like IEEE
802.1Q, but rather emulated hubs, so let's switch to that terminology
instead. While we're at it, move the subsection about hub a little bit
downward in the documentation (it's not as important anymore as it was
before the invention of the -netdev parameter), and extend it a little
bit.
Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Thomas Huth [Mon, 30 Apr 2018 18:02:24 +0000 (20:02 +0200)]
net: Get rid of 'vlan' terminology and use 'hub' instead in the source files
'vlan' is very confusing since it does not mean something like IEEE
802.1Q, but rather emulated hubs, so let's switch to that terminology
instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Thomas Huth [Mon, 30 Apr 2018 18:02:23 +0000 (20:02 +0200)]
net: Remove the deprecated "vlan" parameter
It's been marked as deprecated since QEMU v2.9.0, so that should have
been enough time for everybody to either just drop unnecessary "vlan=0"
parameters, to switch to the modern -device + -netdev syntax for connecting
guest NICs with host network backends, or to switch to the "hubport" netdev
in case hubs are really wanted instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Thomas Huth [Mon, 30 Apr 2018 07:26:45 +0000 (09:26 +0200)]
net: Fix memory leak in net_param_nic()
The early exits in case of errors leak the memory allocated for nd_id.
Fix it by using a "goto out" to the cleanup at the end of the function
instead.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Peter Maydell [Fri, 11 May 2018 14:41:29 +0000 (15:41 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/cota-target-pull-request' into staging
* Fix all next_page checks for overflow.
* Convert six targets to the translator loop.
# gpg: Signature made Wed 09 May 2018 18:20:43 BST
# gpg: using RSA key
64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/cota-target-pull-request: (28 commits)
target/riscv: convert to TranslatorOps
target/riscv: convert to DisasContextBase
target/riscv: convert to DisasJumpType
target/openrisc: convert to TranslatorOps
target/openrisc: convert to DisasContextBase
target/s390x: convert to TranslatorOps
target/s390x: convert to DisasContextBase
target/s390x: convert to DisasJumpType
target/mips: convert to TranslatorOps
target/mips: use *ctx for DisasContext
target/mips: convert to DisasContextBase
target/mips: convert to DisasJumpType
target/mips: use lookup_and_goto_ptr on BS_STOP
target/sparc: convert to TranslatorOps
target/sparc: convert to DisasContextBase
target/sparc: convert to DisasJumpType
target/sh4: convert to TranslatorOps
translator: merge max_insns into DisasContextBase
target/mips: avoid integer overflow in next_page PC check
target/s390x: avoid integer overflow in next_page PC check
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 11 May 2018 13:41:38 +0000 (14:41 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/tcg-next-pull-request' into staging
Queued TCG patches
# gpg: Signature made Wed 09 May 2018 16:46:21 BST
# gpg: using RSA key
64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/tcg-next-pull-request:
tcg: Limit the number of ops in a TB
tcg/i386: Fix dup_vec in non-AVX2 codepath
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Tue, 8 May 2018 18:55:20 +0000 (11:55 -0700)]
target/m68k: Fix build Werror with gcc 8.0.1
Fedora 28 ships with the released gcc 8.
The Werror stems from the compiler finding a path through the second
switch via a missing default case in which src1 is uninitialized, and
not being able to prove that the missing default case is unreachable
due to the first switch.
Simplify the second switch to merge default with OS_LONG,
which returns directly. This removes the unreachable path.
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id:
20180508185520.23757-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 10 May 2018 09:25:14 +0000 (10:25 +0100)]
Merge remote-tracking branch 'remotes/riscv/tags/riscv-qemu-2.13-minor-fixes-3' into staging
RISC-V: QEMU 2.13 Minor Fixes
* Require libfdt when configuring for 'riscv*-softmmu'
* Increase HTIF priority and allow zero base address
# gpg: Signature made Wed 09 May 2018 11:15:33 BST
# gpg: using DSA key
6BF1D7B357EF3E4F
# gpg: Good signature from "Michael Clark <michaeljclark@mac.com>"
# gpg: aka "Michael Clark <mjc@sifive.com>"
# gpg: aka "Michael Clark <michael@metaparadigm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7C99 930E B17C D8BA 073D 5EFA 6BF1 D7B3 57EF 3E4F
* remotes/riscv/tags/riscv-qemu-2.13-minor-fixes-3:
riscv: requires libfdt
riscv: htif: increase the priority of the htif subregion
riscv: spike: allow base == 0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Emilio G. Cota [Fri, 6 Apr 2018 17:42:27 +0000 (13:42 -0400)]
target/riscv: convert to TranslatorOps
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Tue, 13 Feb 2018 23:28:36 +0000 (18:28 -0500)]
target/riscv: convert to DisasContextBase
Notes:
- Did not convert {num,max}_insns, since the corresponding code
will go away in the next patch.
- ctx->pc becomes ctx->base.pc_next, and ctx->next_pc becomes
ctx->pc_succ_insn.
While at it, convert the remaining tb->cflags readers to tb_cflags().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Michael Clark <mjc@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Tue, 13 Feb 2018 23:27:54 +0000 (18:27 -0500)]
target/riscv: convert to DisasJumpType
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Michael Clark <mjc@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Sun, 18 Feb 2018 01:04:40 +0000 (20:04 -0500)]
target/openrisc: convert to TranslatorOps
Notes:
- Changed the num_insns test in insn_start to check for
dc->base.num_insns > 1, since when tb_start is first
called in a TB, base.num_insns is already set to 1.
- Removed DISAS_NEXT from the switch in tb_stop; use
DISAS_TOO_MANY instead.
- Added an assert_not_reached on tb_stop for DISAS_NEXT
and the default case.
- Merged the two separate log_target_disas calls into the
disas_log op.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Sun, 18 Feb 2018 00:32:26 +0000 (19:32 -0500)]
target/openrisc: convert to DisasContextBase
While at it, set is_jmp to DISAS_NORETURN when generating
an exception.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Thu, 1 Mar 2018 01:06:56 +0000 (20:06 -0500)]
target/s390x: convert to TranslatorOps
Note: I looked into dropping dc->do_debug. However, I don't see
an easy way to do it given that TOO_MANY is also valid
when we just translate more than max_insns. Thus, the check
for do_debug in "case DISAS_PC_CC_UPDATED" would still need
additional state to know whether or not we came from
breakpoint_check.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: David Hildenbrand <david@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Fri, 16 Feb 2018 22:59:44 +0000 (17:59 -0500)]
target/s390x: convert to DisasContextBase
Notes:
- Did not convert {num,max}_insns and is_jmp, since the corresponding
code will go away in the next patch.
- Avoided a checkpatch error in use_exit_tb.
- As suggested by David, (1) Drop ctx.pc and use
ctx.base.pc_next instead, and (2) Rename ctx.next_pc to
ctx.pc_tmp and add a comment about it.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Fri, 16 Feb 2018 22:43:21 +0000 (17:43 -0500)]
target/s390x: convert to DisasJumpType
The only non-trivial modification is the use of DISAS_TOO_MANY
in the same way is used by the generic translation loop.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Fri, 16 Feb 2018 01:52:07 +0000 (20:52 -0500)]
target/mips: convert to TranslatorOps
Notes:
- DISAS_TOO_MANY replaces the former "break" in the translation loop.
However, care must be taken not to overwrite a previous condition
in is_jmp; that's why in translate_insn we first check is_jmp and
return if it's != DISAS_NEXT.
- Added an assert in translate_insn, before exiting due to an exception,
to make sure that is_jmp is set to DISAS_NORETURN (the exception
generation function always sets it.)
- Added an assert for the default case in is_jmp's switch.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Fri, 16 Feb 2018 01:45:46 +0000 (20:45 -0500)]
target/mips: use *ctx for DisasContext
No changes to the logic here; this is just to make the diff
that follows easier to read.
While at it, remove the unnecessary 'struct' in
'struct TranslationBlock'.
Note that checkpatch complains with a false positive:
ERROR: space prohibited after that '&' (ctx:WxW)
#75: FILE: target/mips/translate.c:20220:
+ ctx->kscrexist = (env->CP0_Config4 >> CP0C4_KScrExist) & 0xff;
^
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Fri, 16 Feb 2018 01:00:49 +0000 (20:00 -0500)]
target/mips: convert to DisasContextBase
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Fri, 16 Feb 2018 00:36:03 +0000 (19:36 -0500)]
target/mips: convert to DisasJumpType
Notes:
- BS_EXCP in generate_exception_err and after hen_helper_wait
becomes DISAS_NORETURN, because we do not return after
raising an exception.
- Some uses of BS_EXCP are misleading in that they're used
only as a "not BS_STOP" exit condition, i.e. they have nothing
to do with an actual exception. For those cases, define
and use DISAS_EXIT, which is clearer. With this and the
above change, BS_EXCP goes away completely.
- fix a comment typo (s/intetrupt/interrupt/).
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Wed, 11 Apr 2018 15:44:28 +0000 (11:44 -0400)]
target/mips: use lookup_and_goto_ptr on BS_STOP
The TB after BS_STOP is not fixed (e.g. helper_mtc0_hwrena
changes hflags, which ends up changing the TB flags via
cpu_get_tb_cpu_state). This requires a full lookup (i.e.
with flags) via lookup_and_goto_ptr instead of gen_goto_tb,
since the latter only looks at the PC for in-page goto's. Fix it.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Thu, 15 Feb 2018 22:50:16 +0000 (17:50 -0500)]
target/sparc: convert to TranslatorOps
Notes:
- Moved the cross-page check from the end of translate_insn to
init_disas_context.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Thu, 15 Feb 2018 02:16:30 +0000 (21:16 -0500)]
target/sparc: convert to DisasContextBase
Notes:
- pc and npc are left unmodified, since they can point to out-of-TB
jump targets.
- Got rid of last_pc in gen_intermediate_code(), using base.pc_next
instead. Only update pc_next (1) on a breakpoint (so that tb->size
includes the insn), and (2) after reading the current instruction
from memory. This allows us to use base.pc_next in the BP check,
which is what the translator loop does.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Thu, 15 Feb 2018 01:52:14 +0000 (20:52 -0500)]
target/sparc: convert to DisasJumpType
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Fri, 16 Feb 2018 02:15:25 +0000 (21:15 -0500)]
target/sh4: convert to TranslatorOps
This was fairly straightforward since it had already been converted
to DisasContextBase; just had to add TARGET_TOO_MANY to the switch
in tb_stop.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Tue, 20 Feb 2018 01:51:58 +0000 (20:51 -0500)]
translator: merge max_insns into DisasContextBase
While at it, use int for both num_insns and max_insns to make
sure we have same-type comparisons.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Tue, 10 Apr 2018 15:13:54 +0000 (11:13 -0400)]
target/mips: avoid integer overflow in next_page PC check
If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Tue, 10 Apr 2018 15:12:26 +0000 (11:12 -0400)]
target/s390x: avoid integer overflow in next_page PC check
If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Tue, 10 Apr 2018 15:09:52 +0000 (11:09 -0400)]
target/arm: avoid integer overflow in next_page PC check
If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Tue, 10 Apr 2018 14:47:51 +0000 (10:47 -0400)]
target/microblaze: avoid integer overflow in next_page PC check
If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Tue, 10 Apr 2018 14:47:41 +0000 (10:47 -0400)]
target/tilegx: avoid integer overflow in next_page PC check
If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Tue, 10 Apr 2018 14:47:28 +0000 (10:47 -0400)]
target/unicore32: avoid integer overflow in next_page PC check
If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Tue, 10 Apr 2018 14:47:12 +0000 (10:47 -0400)]
target/xtensa: avoid integer overflow in next_page PC check
If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Tue, 10 Apr 2018 14:46:58 +0000 (10:46 -0400)]
target/lm32: avoid integer overflow in next_page PC check
If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Michael Walle <michael@walle.cc>
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Tue, 10 Apr 2018 14:46:45 +0000 (10:46 -0400)]
target/cris: avoid integer overflow in next_page PC check
If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emilio G. Cota [Tue, 10 Apr 2018 15:11:04 +0000 (11:11 -0400)]
target/riscv: avoid integer overflow in next_page PC check
If the PC is in the last page of the address space, next_page_start
overflows to 0. Fix it.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Michael Clark <mjc@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Tue, 8 May 2018 19:18:59 +0000 (19:18 +0000)]
tcg: Limit the number of ops in a TB
In
6001f7729e12 we partially attempt to address the branch
displacement overflow caused by
15fa08f845.
However, gcc/testsuite/gcc.target/aarch64/advsimd-intrinsics/vqtbX.c
is a testcase that contains a TB so large as to overflow anyway.
The limit here of 8000 ops produces a maximum output TB size of
24112 bytes on a ppc64le host with that test case. This is still
much less than the maximum forward branch distance of 32764 bytes.
Cc: qemu-stable@nongnu.org
Fixes:
15fa08f845 ("tcg: Dynamically allocate TCGOps")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Fri, 4 May 2018 15:34:31 +0000 (16:34 +0100)]
tcg/i386: Fix dup_vec in non-AVX2 codepath
The VPUNPCKLD* instructions are all "non-destructive source",
indicated by "NDS" in the encoding string in the x86 ISA manual.
This means that they take two source operands, one of which is
encoded in the VEX.vvvv field. We were incorrectly treating them
as if they were destructive-source and passing 0 as the 'v'
argument of tcg_out_vex_modrm(). This meant we were always
using %xmm0 as one of the source operands, causing incorrect
results if the register allocator happened to want to use
something else. For instance the input AArch64 insn:
DUP v26.16b, w21
which becomes TCG IR ops:
dup_vec v128,e8,tmp2,x21
st_vec v128,e8,tmp2,env,$0xa40
was assembled to:
0x607c568c: c4 c1 7a 7e 86 e8 00 00 vmovq 0xe8(%r14), %xmm0
0x607c5694: 00
0x607c5695: c5 f9 60 c8 vpunpcklbw %xmm0, %xmm0, %xmm1
0x607c5699: c5 f9 61 c9 vpunpcklwd %xmm1, %xmm0, %xmm1
0x607c569d: c5 f9 70 c9 00 vpshufd $0, %xmm1, %xmm1
0x607c56a2: c4 c1 7a 7f 8e 40 0a 00 vmovdqu %xmm1, 0xa40(%r14)
0x607c56aa: 00
when the vpunpcklwd insn should be "%xmm1, %xmm1, %xmm1".
This resulted in our incorrectly setting the output vector to
q26=
0000320000003200:
0000320000003200
when given an input of x21 ==
0000000002803200
rather than the expected all-zeroes.
Pass the correct source register number to tcg_out_vex_modrm()
for these insns.
Fixes:
770c2fc7bb70804a
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20180504153431.5169-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
KONRAD Frederic [Thu, 3 May 2018 15:17:16 +0000 (17:17 +0200)]
riscv: requires libfdt
When compiling on a machine without libfdt installed the configure script
should try to get libfdt from the git or should die because otherwise
CONFIG_LIBFDT is not set and the build process end in an error in the link
phase.. eg:
hw/riscv/virt.o: In function `riscv_virt_board_init':
qemu/src/hw/riscv/virt.c:317: undefined reference to `qemu_fdt_setprop_cell'
qemu/src/hw/riscv/virt.c:319: undefined reference to `qemu_fdt_setprop_cell'
qemu/src/hw/riscv/virt.c:345: undefined reference to `qemu_fdt_dumpdtb'
collect2: error: ld returned 1 exit status
make[1]: *** [qemu-system-riscv64] Error 1
make: *** [subdir-riscv64-softmmu] Error 2
Cc: qemu-stable@nongnu.org
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Message-Id: <
1525360636-18229-4-git-send-email-frederic.konrad@adacore.com>
KONRAD Frederic [Thu, 3 May 2018 15:17:15 +0000 (17:17 +0200)]
riscv: htif: increase the priority of the htif subregion
The htif device is supposed to be mapped over an other subregion. So increase
its priority to one to avoid any conflict.
Here is the output of info mtree:
Before:
(qemu) info mtree
address-space: memory
0000000000000000-
ffffffffffffffff (prio 0, i/o): system
0000000000000000-
000000000000000f (prio 0, i/o): riscv.htif.uart
0000000000000000-
0000000000011fff (prio 0, ram): riscv.spike.bootrom
0000000002000000-
000000000200ffff (prio 0, i/o): riscv.sifive.clint
0000000080000000-
0000000087ffffff (prio 0, ram): riscv.spike.ram
address-space: I/O
0000000000000000-
000000000000ffff (prio 0, i/o): io
address-space: cpu-memory-0
0000000000000000-
ffffffffffffffff (prio 0, i/o): system
0000000000000000-
000000000000000f (prio 0, i/o): riscv.htif.uart
0000000000000000-
0000000000011fff (prio 0, ram): riscv.spike.bootrom
0000000002000000-
000000000200ffff (prio 0, i/o): riscv.sifive.clint
0000000080000000-
0000000087ffffff (prio 0, ram): riscv.spike.ram
After:
(qemu) info mtree
address-space: memory
0000000000000000-
ffffffffffffffff (prio 0, i/o): system
0000000000000000-
000000000000000f (prio 1, i/o): riscv.htif.uart
0000000000000000-
0000000000011fff (prio 0, ram): riscv.spike.bootrom
0000000002000000-
000000000200ffff (prio 0, i/o): riscv.sifive.clint
0000000080000000-
0000000087ffffff (prio 0, ram): riscv.spike.ram
address-space: I/O
0000000000000000-
000000000000ffff (prio 0, i/o): io
address-space: cpu-memory-0
0000000000000000-
ffffffffffffffff (prio 0, i/o): system
0000000000000000-
000000000000000f (prio 1, i/o): riscv.htif.uart
0000000000000000-
0000000000011fff (prio 0, ram): riscv.spike.bootrom
0000000002000000-
000000000200ffff (prio 0, i/o): riscv.sifive.clint
0000000080000000-
0000000087ffffff (prio 0, ram): riscv.spike.ram
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Message-Id: <
1525360636-18229-3-git-send-email-frederic.konrad@adacore.com>
KONRAD Frederic [Thu, 3 May 2018 15:17:14 +0000 (17:17 +0200)]
riscv: spike: allow base == 0
The sanity check on base doesn't allow htif to be mapped @0. Check if the
symbol exists instead so we can map it where we want.
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Message-Id: <
1525360636-18229-2-git-send-email-frederic.konrad@adacore.com>
Peter Maydell [Tue, 8 May 2018 16:05:58 +0000 (17:05 +0100)]
Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into staging
# gpg: Signature made Tue 08 May 2018 16:18:22 BST
# gpg: using RSA key
BDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg: aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg: aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057
* remotes/cody/tags/block-pull-request:
sheepdog: Fix sd_co_create_opts() memory leaks
iotests: Add test for cancelling a mirror job
block/mirror: Make cancel always cancel pre-READY
block/mirror: honor ratelimit again
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Kevin Wolf [Thu, 3 May 2018 15:35:09 +0000 (17:35 +0200)]
sheepdog: Fix sd_co_create_opts() memory leaks
Both the option string for the 'redundancy' option and the
SheepdogRedundancy object that is created accordingly could be leaked in
error paths. This fixes the memory leaks.
Reported by Coverity (CID
1390614 and
1390641).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id:
20180503153509.22223-1-kwolf@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Max Reitz [Tue, 1 May 2018 22:05:09 +0000 (00:05 +0200)]
iotests: Add test for cancelling a mirror job
We already have an extensive mirror test (041) which does cover
cancelling a mirror job, especially after it has emitted the READY
event. However, it does not check what exact events are emitted after
block-job-cancel is executed. More importantly, it does not use
throttling to ensure that it covers the case of block-job-cancel before
READY.
It would be possible to add this case to 041, but considering it is
already our largest test file, it makes sense to create a new file for
these cases.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id:
20180501220509.14152-3-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Max Reitz [Tue, 1 May 2018 22:05:08 +0000 (00:05 +0200)]
block/mirror: Make cancel always cancel pre-READY
Commit
b76e4458b1eb3c32e9824fe6aa51f67d2b251748 made the mirror block
job respect block-job-cancel's @force flag: With that flag set, it would
now always really cancel, even post-READY.
Unfortunately, it had a side effect: Without that flag set, it would now
never cancel, not even before READY. Considering that is an
incompatible change and not noted anywhere in the commit or the
description of block-job-cancel's @force parameter, this seems
unintentional and we should revert to the previous behavior, which is to
immediately cancel the job when block-job-cancel is called before source
and target are in sync (i.e. before the READY event).
Cc: qemu-stable@nongnu.org
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1572856
Reported-by: Yanan Fu <yfu@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
20180501220509.14152-2-mreitz@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Stefan Hajnoczi [Tue, 24 Apr 2018 12:35:27 +0000 (13:35 +0100)]
block/mirror: honor ratelimit again
Commit
b76e4458b1eb3c32e9824fe6aa51f67d2b251748 ("block/mirror: change
the semantic of 'force' of block-job-cancel") accidentally removed the
ratelimit in the mirror job.
Reintroduce the ratelimit but keep the block-job-cancel force=true
behavior that was added in commit
b76e4458b1eb3c32e9824fe6aa51f67d2b251748.
Note that block_job_sleep_ns() returns immediately when the job is
cancelled. Therefore it's safe to unconditionally call
block_job_sleep_ns() - a cancelled job does not sleep.
This commit fixes the non-deterministic qemu-iotests 185 output. The
test relies on the ratelimit to make the job sleep until the 'quit'
command is processed. Previously the job could complete before the
'quit' command was received since there was no ratelimit.
Cc: Liang Li <liliang.opensource@gmail.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
20180424123527.19168-1-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Peter Maydell [Tue, 8 May 2018 14:25:17 +0000 (15:25 +0100)]
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Machine queue, 2018-05-07
* pc-dimm: factor out MemoryDevice
(virtio-pmem and virtio-mem will make use of the new abstraction later)
* scripts/device-crash-test: Removed fixed CAN entries
# gpg: Signature made Mon 07 May 2018 18:01:42 BST
# gpg: using RSA key
2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
scripts/device-crash-test: Removed fixed CAN entries
vl: allow 'maxmem' without 'slot'
spapr: rename "hotplug memory" terminology to "device memory"
pc: rename "hotplug memory" terminology to "device memory"
machine: rename MemoryHotplugState to DeviceMemoryState
pc-dimm: move actual plug/unplug of a memory region to MemoryDevice
pc-dimm: factor out capacity and slot checks into MemoryDevice
pc-dimm: factor out address search into MemoryDevice code
pc-dimm: pass in the machine and to the MemoryHotplugState
pc-dimm: no need to pass the memory region
machine: make MemoryHotplugState accessible via the machine
pc-dimm: factor out MemoryDevice interface
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 8 May 2018 13:23:02 +0000 (14:23 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/vga-
20180507-pull-request' into staging
qxl: fix local renderer crash
# gpg: Signature made Mon 07 May 2018 10:52:09 BST
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/vga-
20180507-pull-request:
qxl: fix local renderer crash
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 8 May 2018 12:34:03 +0000 (13:34 +0100)]
Merge remote-tracking branch 'remotes/riscv/tags/riscv-qemu-2.13-pull-
20180506' into staging
RISC-V: QEMU 2.13 Privileged ISA emulation updates
Several code cleanups, minor specification conformance changes,
fixes to make ROM read-only and add device-tree size checks.
* Honour privileged ISA v1.10 counter enable CSRs.
* Implements WARL behavior for CSRs that don't support writes
* Past behavior of raising traps was non-conformant
with the RISC-V Privileged ISA Specification v1.10.
* Allow S-mode access to sstatus.MXR when priv ISA >= v1.10
* Sets mtval/stval to zero on exceptions without addresses
* Past behavior of leaving the last value was non-conformant
with the RISC-V Privileged ISA Specition v1.10. mtval/stval
must be set on all exceptions; to zero if not supported.
* Make ROMs read-only and implement device-tree size checks
* Uses memory_region_init_rom and rom_add_blob_fixed_as
* Adds hexidecimal instruction bytes to disassembly output.
* Fixes missing break statement for rv128 disassembly.
* Several code cleanups
* Replacing hard-coded constants with enums
* Dead-code elimination
This is an incremental pull that contains 20 reviewed changes out
of 38 changes currently queued in the qemu-2.13-for-upstream branch.
# gpg: Signature made Sun 06 May 2018 00:27:37 BST
# gpg: using DSA key
6BF1D7B357EF3E4F
# gpg: Good signature from "Michael Clark <michaeljclark@mac.com>"
# gpg: aka "Michael Clark <mjc@sifive.com>"
# gpg: aka "Michael Clark <michael@metaparadigm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7C99 930E B17C D8BA 073D 5EFA 6BF1 D7B3 57EF 3E4F
* remotes/riscv/tags/riscv-qemu-2.13-pull-
20180506:
RISC-V: Mark ROM read-only after copying in code
RISC-V: No traps on writes to misa,minstret,mcycle
RISC-V: Make mtvec/stvec ignore vectored traps
RISC-V: Add mcycle/minstret support for -icount auto
RISC-V: Use [ms]counteren CSRs when priv ISA >= v1.10
RISC-V: Allow S-mode mxr access when priv ISA >= v1.10
RISC-V: Clear mtval/stval on exceptions without info
RISC-V: Hardwire satp to 0 for no-mmu case
RISC-V: Update E and I extension order
RISC-V: Remove erroneous comment from translate.c
RISC-V: Remove EM_RISCV ELF_MACHINE indirection
RISC-V: Make virt header comment title consistent
RISC-V: Make some header guards more specific
RISC-V: Fix missing break statement in disassembler
RISC-V: Include instruction hex in disassembly
RISC-V: Remove unused class definitions
RISC-V: Remove identity_translate from load_elf
RISC-V: Use ROM base address and size from memmap
RISC-V: Make virt board description match spike
RISC-V: Replace hardcoded constants with enum values
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 8 May 2018 11:02:18 +0000 (12:02 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/usb-
20180507-pull-request' into staging
usb: fixes for mtp and host.
# gpg: Signature made Mon 07 May 2018 10:44:26 BST
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/usb-
20180507-pull-request:
usb-host: skip open on pending postload bh
usb-mtp: Unconditionally check for the readonly bit
usb-mtp: Add some NULL checks for issues pointed out by coverity
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Greg Kurz [Mon, 7 May 2018 09:02:09 +0000 (11:02 +0200)]
ppc: e500: use g_strdup_printf() instead of snprintf()
qemu-system-ppc fails to build with GCC 8.0.1:
/home/hsp/src/qemu-master/hw/ppc/e500.c: In function ‘ppce500_load_device_tree’:
/home/hsp/src/qemu-master/hw/ppc/e500.c:442:37: error: ‘/pic@’
directive output may be truncated writing 5 bytes into a region of
size between 1 and 128 [-Werror=format-truncation=]
snprintf(mpic, sizeof(mpic), "%s/pic@%llx", soc, MPC8544_MPIC_REGS_OFFSET);
^~~~~
In file included from /usr/include/stdio.h:862,
from /home/hsp/src/qemu-master/include/qemu/osdep.h:68,
from /home/hsp/src/qemu-master/hw/ppc/e500.c:17:
/usr/include/bits/stdio2.h:64:10: note: ‘__builtin___snprintf_chk’
output between 11 and 138 bytes into a destination of size 128
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/hsp/src/qemu-master/hw/ppc/e500.c:470:39: error:
‘/global-utilities@’ directive output may be truncated writing 18
bytes into a region of size between 1 and 128
[-Werror=format-truncation=]
snprintf(gutil, sizeof(gutil), "%s/global-utilities@%llx", soc,
^~~~~~~~~~~~~~~~~~
In file included from /usr/include/stdio.h:862,
from /home/hsp/src/qemu-master/include/qemu/osdep.h:68,
from /home/hsp/src/qemu-master/hw/ppc/e500.c:17:
/usr/include/bits/stdio2.h:64:10: note: ‘__builtin___snprintf_chk’
output between 24 and 151 bytes into a destination of size 128
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/hsp/src/qemu-master/hw/ppc/e500.c:477:36: error: ‘/msi@’
directive output may be truncated writing 5 bytes into a region of
size between 0 and 127 [-Werror=format-truncation=]
snprintf(msi, sizeof(msi), "/%s/msi@%llx", soc, MPC8544_MSI_REGS_OFFSET);
^~~~~
In file included from /usr/include/stdio.h:862,
from /home/hsp/src/qemu-master/include/qemu/osdep.h:68,
from /home/hsp/src/qemu-master/hw/ppc/e500.c:17:
/usr/include/bits/stdio2.h:64:10: note: ‘__builtin___snprintf_chk’
output between 12 and 139 bytes into a destination of size 128
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by converting e500 to use g_strdup_printf()+g_free() instead
of snprintf(). This is done globally, even for call sites that don't
break build, since this is the preferred practice in QEMU.
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id:
152568372989.443627.
900708381919207053.stgit@bahia.lan
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thomas Huth [Mon, 16 Apr 2018 17:41:29 +0000 (19:41 +0200)]
scripts/device-crash-test: Removed fixed CAN entries
The CAN device crashes have been fixed with the commit
089eac81e1d34d202471c0a023284f47f4c5f00e already.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
1523900489-25950-1-git-send-email-thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Mon, 23 Apr 2018 16:51:26 +0000 (18:51 +0200)]
vl: allow 'maxmem' without 'slot'
We will be able to have memory devices (e.g. virtio) not requiring the
slot parameter (e.g. not exposed via ACPI). We still need the maxmem
parameter to setup a proper memory region for device memory. And some
architectures (e.g. s390x) will have to set up the maximum possible guest
address space size based on the maxmem parameter.
As far as I can see, all code (pc.c,spapr.c,ACPI code) should handle
!slots just fine, even though maxmem is set.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20180423165126.15441-12-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Mon, 23 Apr 2018 16:51:25 +0000 (18:51 +0200)]
spapr: rename "hotplug memory" terminology to "device memory"
Let's make it clear at relevant places that we are dealing with device
memory. That it can be used for memory hotplug is just a special case.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20180423165126.15441-11-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
[ehabkost: rebased series, solved conflicts at spapr.c]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Mon, 23 Apr 2018 16:51:24 +0000 (18:51 +0200)]
pc: rename "hotplug memory" terminology to "device memory"
Let's make it clear that we are dealing with device memory. That it can
be used for memory hotplug is just a special case.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20180423165126.15441-10-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Mon, 23 Apr 2018 16:51:23 +0000 (18:51 +0200)]
machine: rename MemoryHotplugState to DeviceMemoryState
Rename it to better match the new terminology.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20180423165126.15441-9-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Mon, 23 Apr 2018 16:51:22 +0000 (18:51 +0200)]
pc-dimm: move actual plug/unplug of a memory region to MemoryDevice
Registering the memory region for migration has do be done by the owner.
There could be cases, where we don't want to migrate the memory.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20180423165126.15441-8-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Mon, 23 Apr 2018 16:51:21 +0000 (18:51 +0200)]
pc-dimm: factor out capacity and slot checks into MemoryDevice
Move the checks into memory_device_get_free_addr(). This will check
before doing any calculations if we have KVM/vhost slots left and if
the total region size would be exceeded.
Of course, while at it, make it independent of pc-dimm code.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20180423165126.15441-7-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Mon, 23 Apr 2018 16:51:20 +0000 (18:51 +0200)]
pc-dimm: factor out address search into MemoryDevice code
This mainly moves code, but does a handfull of optimizations:
- We pass the machine instead of the address space properties
- We check the hinted address directly and handle fragmented memory
better
- We make the search independent of pc-dimm
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20180423165126.15441-6-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Mon, 23 Apr 2018 16:51:19 +0000 (18:51 +0200)]
pc-dimm: pass in the machine and to the MemoryHotplugState
We use the machine internally either way, so let's just pass it in then.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20180423165126.15441-5-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Mon, 23 Apr 2018 16:51:18 +0000 (18:51 +0200)]
pc-dimm: no need to pass the memory region
We can just query it ourselves. When unplugging, we should always be
able to the region (as it was previously plugged). E.g. PPC already
assumed that and used &error_abort.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20180423165126.15441-4-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Mon, 23 Apr 2018 16:51:17 +0000 (18:51 +0200)]
machine: make MemoryHotplugState accessible via the machine
Let's allow to query the MemoryHotplugState directly from the machine.
If the pointer is NULL, the machine does not support memory devices. If
the pointer is !NULL, the machine supports memory devices and the
data structure contains information about the applicable physical
guest address space region.
This allows us to generically detect if a certain machine has support
for memory devices, and to generically manage it (find free address
range, plug/unplug a memory region).
We will rename "MemoryHotplugState" to something more meaningful
("DeviceMemory") after we completed factoring out the pc-dimm code into
MemoryDevice code.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20180423165126.15441-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
[ehabkost: rebased series, solved conflicts at spapr.c]
[ehabkost: squashed fix to use g_malloc0()]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Mon, 23 Apr 2018 16:51:16 +0000 (18:51 +0200)]
pc-dimm: factor out MemoryDevice interface
On the qmp level, we already have the concept of memory devices:
"query-memory-devices"
Right now, we only support NVDIMM and PCDIMM.
We want to map other devices later into the address space of the guest.
Such device could e.g. be virtio devices. These devices will have a
guest memory range assigned but won't be exposed via e.g. ACPI. We want
to make them look like memory device, but not glued to pc-dimm.
Especially, it will not always be possible to have TYPE_PC_DIMM as a parent
class (e.g. virtio devices). Let's use an interface instead. As a first
part, convert handling of
- qmp_pc_dimm_device_list
- get_plugged_memory_size
to our new model. plug/unplug stuff etc. will follow later.
A memory device will have to provide the following functions:
- get_addr(): Necessary, as the property "addr" can e.g. not be used for
virtio devices (already defined).
- get_plugged_size(): The amount this device offers to the guest as of
now.
- get_region_size(): Because this can later on be bigger than the
plugged size.
- fill_device_info(): Fill MemoryDeviceInfo, e.g. for qmp.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20180423165126.15441-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Gerd Hoffmann [Fri, 27 Apr 2018 11:55:28 +0000 (13:55 +0200)]
qxl: fix local renderer crash
Make sure we only ask the spice local renderer for display updates in
case we have a valid primary surface. Without that spice is confused
and throws errors in case a display update request (triggered by
screendump for example) happens in parallel to a mode switch and hits
the race window where the old primary surface is gone and the new isn't
establisted yet.
Cc: qemu-stable@nongnu.org
Fixes: https://bugzilla.redhat.com//show_bug.cgi?id=
1567733
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id:
20180427115528.345-1-kraxel@redhat.com
Gerd Hoffmann [Thu, 3 May 2018 06:29:32 +0000 (08:29 +0200)]
usb-host: skip open on pending postload bh
usb-host emulates a device unplug after live migration, because the
device state is unknown and unplug/replug makes sure the guest
re-initializes the device into a working state. This can't be done in
post-load though, so post-load just schedules a bottom half which
executes after vmload is complete.
It can happen that the device autoscan timer hits the race window
between scheduling and running the bottom half, which in turn can
triggers an assert().
Fix that issue by just ignoring the usb_host_open() call in case the
bottom half didn't execute yet.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=
1572851
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id:
20180503062932.17233-1-kraxel@redhat.com
Bandan Das [Thu, 3 May 2018 19:20:28 +0000 (15:20 -0400)]
usb-mtp: Unconditionally check for the readonly bit
Currently, it's only being checked if desc is NULL and
so write support breaks upon specifying desc
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id:
20180503192028.14353-3-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Bandan Das [Thu, 3 May 2018 19:20:27 +0000 (15:20 -0400)]
usb-mtp: Add some NULL checks for issues pointed out by coverity
CID
1390578: In usb_mtp_write_metadata, parent can never be NULL but
just in case, add an assert
CID
1390592: Check for o->format only if o !=NULL
CID
1390604: Check s->data_out != NULL in usb_mtp_handle_data
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id:
20180503192028.14353-2-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Michael Clark [Sat, 3 Mar 2018 22:52:13 +0000 (11:52 +1300)]
RISC-V: Mark ROM read-only after copying in code
The sifive_u machine already marks its ROM readonly however
it has the wrong base address for its mask ROM. This patch
fixes the sifive_u mask ROM base address.
This commit makes all other boards consistently use mask_rom
as the variable name for their ROMs. Boards that use device
tree now check that that the device tree fits in the assigned
ROM space using the new qemu_fdt_totalsize(void *fdt)
interface, adding a bounds check and error message. This
can detect truncation.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <Alistair.Francis@wdc.com>
Michael Clark [Mon, 5 Mar 2018 21:33:31 +0000 (10:33 +1300)]
RISC-V: No traps on writes to misa,minstret,mcycle
These fields are marked WARL (Write Any Values, Reads
Legal Values) in the RISC-V Privileged Architecture
Specification so instead of raising exceptions,
illegal writes are silently dropped.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Michael Clark [Mon, 5 Mar 2018 21:17:11 +0000 (10:17 +1300)]
RISC-V: Make mtvec/stvec ignore vectored traps
Vectored traps for asynchrounous interrupts are optional.
The mtvec/stvec mode field is WARL and hence does not trap
if an illegal value is written. Illegal values are ignored.
Later we can add RISCV_FEATURE_VECTORED_TRAPS however
until then the correct behavior for WARL (Write Any, Read
Legal) fields is to drop writes to unsupported bits.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Michael Clark [Fri, 6 Apr 2018 00:46:19 +0000 (12:46 +1200)]
RISC-V: Add mcycle/minstret support for -icount auto
Previously the mycycle/minstret CSRs and rdcycle/rdinstret
psuedo instructions would return the time as a proxy for an
increasing instruction counter in the absence of having a
precise instruction count. If QEMU is invoked with -icount,
the mcycle/minstret CSRs and rdcycle/rdinstret psuedo
instructions will return the instruction count.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Michael Clark [Sun, 8 Apr 2018 23:33:05 +0000 (11:33 +1200)]
RISC-V: Use [ms]counteren CSRs when priv ISA >= v1.10
Privileged ISA v1.9.1 defines mscounteren and mucounteren:
* mscounteren contains a mask of counters available to S-mode
* mucounteren contains a mask of counters available to U-mode
Privileged ISA v1.10 defines mcounteren and scounteren:
* mcounteren contains a mask of counters available to S-mode
* scounteren contains a mask of counters available to U-mode
mcounteren and scounteren CSR registers were implemented
however they were not honoured for counter accesses when
the privilege ISA was >= v1.10. This fix solves the issue
by coalescing the counter enable registers. In addition
the code now generates illegal instruction exceptions
for accesses to the counter enabled registers depending
on the privileged ISA version.
- Coalesce mscounteren and mcounteren into one variable
- Coalesce mucounteren and scounteren into one variable
- Makes mcounteren and scounteren CSR accesses generate
illegal instructions when the privileged ISA <= v1.9.1
- Makes mscounteren and mucounteren CSR accesses generate
illegal instructions when the privileged ISA >= v1.10
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Michael Clark [Mon, 9 Apr 2018 00:06:30 +0000 (12:06 +1200)]
RISC-V: Allow S-mode mxr access when priv ISA >= v1.10
The mstatus.MXR alias in sstatus should only be writable
by S-mode if the privileged ISA version >= v1.10. Also MXR
was masked in sstatus CSR read but not sstatus CSR writes.
Now we correctly mask sstatus.mxr in both read and write.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Michael Clark [Fri, 16 Mar 2018 19:12:00 +0000 (12:12 -0700)]
RISC-V: Clear mtval/stval on exceptions without info
mtval/stval must be set on all exceptions but zero is
a legal value if there is no exception specific info.
Placing the instruction bytes for illegal instruction
exceptions in mtval/stval is an optional feature and
is currently not supported by QEMU RISC-V.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Michael Clark [Mon, 5 Mar 2018 20:48:41 +0000 (09:48 +1300)]
RISC-V: Hardwire satp to 0 for no-mmu case
satp is WARL so it should not trap on illegal writes, rather
it can be hardwired to zero and silently ignore illegal writes.
It seems the RISC-V WARL behaviour is preferred to having to
trap overhead versus simply reading back the value and checking
if the write took (saves hundreds of cycles and more complex
trap handling code).
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Michael Clark [Mon, 5 Mar 2018 00:28:00 +0000 (13:28 +1300)]
RISC-V: Update E and I extension order
Section 22.8 Subset Naming Convention of the RISC-V ISA Specification
defines the canonical order for extensions in the ISA string. It is
silent on the position of the E extension however E is a substitute
for I so it must come early in the extension list order. A comment
is added to state E and I are mutually exclusive, as the E extension
will be added to the RISC-V port in the future.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Michael Clark [Sun, 18 Mar 2018 04:15:40 +0000 (21:15 -0700)]
RISC-V: Remove erroneous comment from translate.c
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Michael Clark [Mon, 5 Mar 2018 07:22:30 +0000 (20:22 +1300)]
RISC-V: Remove EM_RISCV ELF_MACHINE indirection
Pointless indirection. Other ports use EM_ constants directly.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Michael Clark [Mon, 5 Mar 2018 06:24:08 +0000 (19:24 +1300)]
RISC-V: Make virt header comment title consistent
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Michael Clark [Mon, 5 Mar 2018 06:20:53 +0000 (19:20 +1300)]
RISC-V: Make some header guards more specific
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Michael Clark [Sun, 29 Apr 2018 23:06:31 +0000 (11:06 +1200)]
RISC-V: Fix missing break statement in disassembler
This fixes an issue when disassembling rv128 c.sqsp,
where the code erroneously fell through to c.swsp.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Michael Clark [Sun, 4 Mar 2018 00:50:12 +0000 (13:50 +1300)]
RISC-V: Include instruction hex in disassembly
This was added to help debug issues using -d in_asm. It is
useful to see the instruction bytes, as one can detect if
one is trying to execute ASCII or device-tree magic.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Michael Clark [Sun, 4 Mar 2018 00:27:37 +0000 (13:27 +1300)]
RISC-V: Remove unused class definitions
Removes a whole lot of unnecessary boilerplate code. Machines
don't need to be objects. The expansion of the SOC object model
for the RISC-V machines will happen in the future as SiFive
plans to add their FE310 and FU540 SOCs to QEMU. However, it
seems that this present boilerplate is complete unnecessary.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Michael Clark [Sat, 3 Mar 2018 22:32:17 +0000 (11:32 +1300)]
RISC-V: Remove identity_translate from load_elf
When load_elf is called with NULL as an argument to the
address translate callback, it does an identity translation.
This commit removes the redundant identity_translate callback.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Michael Clark [Sat, 3 Mar 2018 22:15:09 +0000 (11:15 +1300)]
RISC-V: Use ROM base address and size from memmap
Another case of replacing hard coded constants, this time
referring to the definition in the virt machine's memmap.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Michael Clark [Sat, 3 Mar 2018 03:23:03 +0000 (16:23 +1300)]
RISC-V: Make virt board description match spike
This makes 'qemu-system-riscv64 -machine help' output more tidy
and consistent.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Michael Clark [Sat, 3 Mar 2018 01:30:07 +0000 (14:30 +1300)]
RISC-V: Replace hardcoded constants with enum values
The RISC-V device-tree code has a number of hard-coded
constants and this change moves them into header enums.
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Peter Maydell [Fri, 4 May 2018 17:58:39 +0000 (18:58 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20180504-1' into staging
target-arm queue:
* Emulate the SMMUv3 (IOMMU); one will be created in the 'virt' board
if the commandline includes "-machine iommu=smmuv3"
* target/arm: Implement v8M VLLDM and VLSTM
* hw/arm: Don't fail qtest due to missing SD card in -nodefaults mode
* Some fixes to silence Coverity false-positives
* arm: boot: set boot_info starting from first_cpu
(fixes a technical bug not visible in practice)
* hw/net/smc91c111: Convert away from old_mmio
* hw/usb/tusb6010: Convert away from old_mmio
* hw/char/cmsdk-apb-uart.c: Accept more input after character read
* target/arm: Make MPUIR write-ignored on OMAP, StrongARM
* hw/arm/virt: Add linux,pci-domain property
# gpg: Signature made Fri 04 May 2018 18:54:49 BST
# gpg: using RSA key
3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-
20180504-1: (24 commits)
hw/arm/virt: Introduce the iommu option
hw/arm/virt-acpi-build: Add smmuv3 node in IORT table
hw/arm/virt: Add SMMUv3 to the virt board
target/arm/kvm: Translate the MSI doorbell in kvm_arch_fixup_msi_route
hw/arm/smmuv3: Abort on vfio or vhost case
hw/arm/smmuv3: Implement translate callback
hw/arm/smmuv3: Event queue recording helper
hw/arm/smmuv3: Implement MMIO write operations
hw/arm/smmuv3: Queue helpers
hw/arm/smmuv3: Wired IRQ and GERROR helpers
hw/arm/smmuv3: Skeleton
hw/arm/smmu-common: VMSAv8-64 page table walk
hw/arm/smmu-common: IOMMU memory region and address space setup
hw/arm/smmu-common: smmu base device and datatypes
target/arm: Implement v8M VLLDM and VLSTM
hw/arm: Don't fail qtest due to missing SD card in -nodefaults mode
target/arm: Tidy condition in disas_simd_two_reg_misc
target/arm: Tidy conditions in handle_vec_simd_shri
arm: boot: set boot_info starting from first_cpu
hw/net/smc91c111: Convert away from old_mmio
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger [Fri, 4 May 2018 17:05:52 +0000 (18:05 +0100)]
hw/arm/virt: Introduce the iommu option
ARM virt machine now exposes a new "iommu" option.
The SMMUv3 IOMMU is instantiated using -machine virt,iommu=smmuv3.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1524665762-31355-15-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prem Mallappa [Fri, 4 May 2018 17:05:52 +0000 (18:05 +0100)]
hw/arm/virt-acpi-build: Add smmuv3 node in IORT table
This patch builds the smmuv3 node in the ACPI IORT table.
The RID space of the root complex, which spans 0x0-0x10000
maps to streamid space 0x0-0x10000 in smmuv3, which in turn
maps to deviceid space 0x0-0x10000 in the ITS group.
The guest must feature the IOMMU probe deferral series
(https://lkml.org/lkml/2017/4/10/214) which fixes streamid
multiple lookup. This bug is not related to the SMMU emulation.
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com>
Message-id:
1524665762-31355-14-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prem Mallappa [Fri, 4 May 2018 17:05:52 +0000 (18:05 +0100)]
hw/arm/virt: Add SMMUv3 to the virt board
Add code to instantiate an smmuv3 in virt machine. A new iommu
integer member is introduced in VirtMachineState to store the type
of the iommu in use.
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1524665762-31355-13-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger [Fri, 4 May 2018 17:05:52 +0000 (18:05 +0100)]
target/arm/kvm: Translate the MSI doorbell in kvm_arch_fixup_msi_route
In case the MSI is translated by an IOMMU we need to fixup the
MSI route with the translated address.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Message-id:
1524665762-31355-12-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger [Fri, 4 May 2018 17:05:52 +0000 (18:05 +0100)]
hw/arm/smmuv3: Abort on vfio or vhost case
At the moment, the SMMUv3 does not support notification on
TLB invalidation. So let's log an error as soon as such notifier
gets enabled.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1524665762-31355-11-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger [Fri, 4 May 2018 17:05:51 +0000 (18:05 +0100)]
hw/arm/smmuv3: Implement translate callback
This patch implements the IOMMU Memory Region translate()
callback. Most of the code relates to the translation
configuration decoding and check (STE, CD).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Message-id:
1524665762-31355-10-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger [Fri, 4 May 2018 17:05:51 +0000 (18:05 +0100)]
hw/arm/smmuv3: Event queue recording helper
Let's introduce a helper function aiming at recording an
event in the event queue.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1524665762-31355-9-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger [Fri, 4 May 2018 17:05:51 +0000 (18:05 +0100)]
hw/arm/smmuv3: Implement MMIO write operations
Now we have relevant helpers for queue and irq
management, let's implement MMIO write operations.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1524665762-31355-8-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger [Fri, 4 May 2018 17:05:51 +0000 (18:05 +0100)]
hw/arm/smmuv3: Queue helpers
We introduce helpers to read/write into the command and event
circular queues.
smmuv3_write_eventq and smmuv3_cmq_consume will become static
in subsequent patches.
Invalidation commands are not yet dealt with. We do not cache
data that need to be invalidated. This will change with vhost
integration.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1524665762-31355-7-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger [Fri, 4 May 2018 17:05:51 +0000 (18:05 +0100)]
hw/arm/smmuv3: Wired IRQ and GERROR helpers
We introduce some helpers to handle wired IRQs and especially
GERROR interrupt. SMMU writes GERROR register on GERROR event
and SW acks GERROR interrupts by setting GERRORn.
The Wired interrupts are edge sensitive hence the pulse usage.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1524665762-31355-6-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prem Mallappa [Fri, 4 May 2018 17:05:51 +0000 (18:05 +0100)]
hw/arm/smmuv3: Skeleton
This patch implements a skeleton for the smmuv3 device.
Datatypes and register definitions are introduced. The MMIO
region, the interrupts and the queue are initialized.
Only the MMIO read operation is implemented here.
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id:
1524665762-31355-5-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eric Auger [Fri, 4 May 2018 17:05:51 +0000 (18:05 +0100)]
hw/arm/smmu-common: VMSAv8-64 page table walk
This patch implements the page table walk for VMSAv8-64.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com>
Message-id:
1524665762-31355-4-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>