OSDN Git Service
Vivek Goyal [Mon, 10 Jun 2019 19:22:06 +0000 (15:22 -0400)]
virtiofsd: Support remote posix locks
Doing posix locks with-in guest kernel are not sufficient if a file/dir
is being shared by multiple guests. So we need the notion of daemon doing
the locks which are visible to rest of the guests.
Given posix locks are per process, one can not call posix lock API on host,
otherwise bunch of basic posix locks properties are broken. For example,
If two processes (A and B) in guest open the file and take locks on different
sections of file, if one of the processes closes the fd, it will close
fd on virtiofsd and all posix locks on file will go away. This means if
process A closes the fd, then locks of process B will go away too.
Similar other problems exist too.
This patch set tries to emulate posix locks while using open file
description locks provided on Linux.
Daemon provides two options (-o posix_lock, -o no_posix_lock) to enable
or disable posix locking in daemon. By default it is enabled.
There are few issues though.
- GETLK() returns pid of process holding lock. As we are emulating locks
using OFD, and these locks are not per process and don't return pid
of process, so GETLK() in guest does not reuturn process pid.
- As of now only F_SETLK is supported and not F_SETLKW. We can't block
the thread in virtiofsd for arbitrary long duration as there is only
one thread serving the queue. That means unlock request will not make
it to daemon and F_SETLKW will block infinitely and bring virtio-fs
to a halt. This is a solvable problem though and will require significant
changes in virtiofsd and kernel. Left as a TODO item for now.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Liu Bo [Mon, 24 Jun 2019 21:53:47 +0000 (05:53 +0800)]
Virtiofsd: fix memory leak on fuse queueinfo
For fuse's queueinfo, both queueinfo array and queueinfos are allocated in
fv_queue_set_started() but not cleaned up when the daemon process quits.
This fixes the leak in proper places.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Eric Ren <renzhen@linux.alibaba.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Eric Ren [Tue, 11 Jun 2019 13:44:40 +0000 (21:44 +0800)]
virtiofsd: fix incorrect error handling in lo_do_lookup
Signed-off-by: Eric Ren <renzhen@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Liu Bo [Fri, 7 Jun 2019 02:38:18 +0000 (10:38 +0800)]
virtiofsd: enable PARALLEL_DIROPS during INIT
lookup is a RO operations, PARALLEL_DIROPS can be enabled.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Masayoshi Mizuma [Tue, 13 Aug 2019 20:06:45 +0000 (16:06 -0400)]
virtiofsd: Prevent multiply running with same vhost_user_socket
virtiofsd can run multiply even if the vhost_user_socket is same path.
]# ./virtiofsd -o vhost_user_socket=/tmp/vhostqemu -o source=/tmp/share &
[1] 244965
virtio_session_mount: Waiting for vhost-user socket connection...
]# ./virtiofsd -o vhost_user_socket=/tmp/vhostqemu -o source=/tmp/share &
[2] 244966
virtio_session_mount: Waiting for vhost-user socket connection...
]#
The user will get confused about the situation and maybe the cause of the
unexpected problem. So it's better to prevent the multiple running.
Create a regular file under localstatedir directory to exclude the
vhost_user_socket. To create and lock the file, use qemu_write_pidfile()
because the API has some sanity checks and file lock.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Applied fixes from Stefan's review and moved osdep include
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Liu Bo [Thu, 6 Jun 2019 21:43:56 +0000 (05:43 +0800)]
virtiofsd: add helper for lo_data cleanup
This offers an helper function for lo_data's cleanup.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Liu Bo [Thu, 6 Jun 2019 21:43:53 +0000 (05:43 +0800)]
virtiofsd: fix memory leak on lo.source
valgrind reported that lo.source is leaked on quiting, but it was defined
as (const char*) as it may point to a const string "/".
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Liu Bo [Thu, 6 Jun 2019 21:43:52 +0000 (05:43 +0800)]
virtiofsd: cleanup allocated resource in se
This cleans up unfreed resources in se on quiting, including
se->virtio_dev, se->vu_socket_path, se->vu_socketfd.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Liu Bo [Wed, 5 Jun 2019 00:42:35 +0000 (08:42 +0800)]
virtiofsd: fix error handling in main()
Neither fuse_parse_cmdline() nor fuse_opt_parse() goes to the right place
to do cleanup.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Jiufei Xue [Tue, 16 Apr 2019 19:08:56 +0000 (03:08 +0800)]
virtiofsd: support nanosecond resolution for file timestamp
Define HAVE_STRUCT_STAT_ST_ATIM to 1 if `st_atim' is member of `struct
stat' which means support nanosecond resolution for the file timestamp
fields.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Fri, 22 Feb 2019 18:33:52 +0000 (18:33 +0000)]
virtiofsd: Clean up inodes on destroy
Clear out our inodes and fd's on a 'destroy' - so we get rid
of them if we reboot the guest.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Miklos Szeredi [Thu, 15 Nov 2018 14:29:51 +0000 (15:29 +0100)]
virtiofsd: passthrough_ll: use hashtable
Improve performance of inode lookup by using a hash table.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Miklos Szeredi [Thu, 15 Nov 2018 14:29:51 +0000 (15:29 +0100)]
virtiofsd: passthrough_ll: clean up cache related options
- Rename "cache=never" to "cache=none" to match 9p's similar option.
- Rename CACHE_NORMAL constant to CACHE_AUTO to match the "cache=auto"
option.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Miklos Szeredi [Wed, 20 Nov 2019 14:25:50 +0000 (14:25 +0000)]
virtiofsd: extract root inode init into setup_root()
Inititialize the root inode in a single place.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
dgilbert:
with fix suggested by Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Miklos Szeredi [Wed, 20 Nov 2019 14:14:29 +0000 (14:14 +0000)]
virtiofsd: fail when parent inode isn't known in lo_do_lookup()
The Linux file handle APIs (struct export_operations) can access inodes
that are not attached to parents because path name traversal is not
performed. Refuse if there is no parent in lo_do_lookup().
Also clean up lo_do_lookup() while we're here.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Miklos Szeredi [Wed, 20 Nov 2019 14:11:09 +0000 (14:11 +0000)]
virtiofsd: rename unref_inode() to unref_inode_lolocked()
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Miklos Szeredi [Thu, 16 Aug 2018 09:14:13 +0000 (11:14 +0200)]
virtiofsd: passthrough_ll: control readdirplus
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Miklos Szeredi [Thu, 16 Aug 2018 09:14:13 +0000 (11:14 +0200)]
virtiofsd: passthrough_ll: disable readdirplus on cache=never
...because the attributes sent in the READDIRPLUS reply would be discarded
anyway.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Miklos Szeredi [Wed, 15 Aug 2018 15:05:29 +0000 (17:05 +0200)]
virtiofsd: passthrough_ll: add renameat2 support
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Fri, 1 Mar 2019 11:18:30 +0000 (11:18 +0000)]
contrib/libvhost-user: Protect slave fd with mutex
In future patches we'll be performing commands on the slave-fd driven
by commands on queues, since those queues will be driven by individual
threads we need to make sure they don't attempt to use the slave-fd
for multiple commands in parallel.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Thu, 7 Feb 2019 18:22:40 +0000 (18:22 +0000)]
vhost-user: Print unexpected slave message types
When we receive an unexpected message type on the slave fd, print
the type.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Fri, 23 Nov 2018 18:19:31 +0000 (18:19 +0000)]
virtiofsd: Kill threads when queues are stopped
Kill the threads we've started when the queues get stopped.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With improvements by:
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Thu, 22 Nov 2018 16:05:09 +0000 (16:05 +0000)]
virtiofsd: Handle hard reboot
Handle a
mount
hard reboot (without unmount)
mount
we get another 'init' which FUSE doesn't normally expect.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Wed, 21 Nov 2018 18:02:07 +0000 (18:02 +0000)]
virtiofsd: Handle reinit
Allow init->destroy->init for mount->umount->mount
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Masayoshi Mizuma [Wed, 6 Nov 2019 19:06:02 +0000 (14:06 -0500)]
virtiofsd: Add timestamp to the log with FUSE_LOG_DEBUG level
virtiofsd has some threads, so we see a lot of logs with debug option.
It would be useful for debugging if we can see the timestamp.
Add nano second timestamp, which got by get_clock(), to the log with
FUSE_LOG_DEBUG level if the syslog option isn't set.
The log is like as:
# ./virtiofsd -d -o vhost_user_socket=/tmp/vhostqemu0 -o source=/tmp/share0 -o cache=auto
...
[
5365943125463727] [ID:
00000002] fv_queue_thread: Start for queue 0 kick_fd 9
[
5365943125568644] [ID:
00000002] fv_queue_thread: Waiting for Queue 0 event
[
5365943125573561] [ID:
00000002] fv_queue_thread: Got queue event on Queue 0
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Masayoshi Mizuma [Wed, 6 Nov 2019 19:06:01 +0000 (14:06 -0500)]
virtiofsd: Add ID to the log with FUSE_LOG_DEBUG level
virtiofsd has some threads, so we see a lot of logs with debug option.
It would be useful for debugging if we can identify the specific thread
from the log.
Add ID, which is got by gettid(), to the log with FUSE_LOG_DEBUG level
so that we can grep the specific thread.
The log is like as:
]# ./virtiofsd -d -o vhost_user_socket=/tmp/vhostqemu0 -o source=/tmp/share0 -o cache=auto
...
[ID:
00000097] unique: 12696, success, outsize: 120
[ID:
00000097] virtio_send_msg: elem 18: with 2 in desc of length 120
[ID:
00000003] fv_queue_thread: Got queue event on Queue 1
[ID:
00000003] fv_queue_thread: Queue 1 gave evalue: 1 available: in: 65552 out: 80
[ID:
00000003] fv_queue_thread: Waiting for Queue 1 event
[ID:
00000071] fv_queue_worker: elem 33: with 2 out desc of length 80 bad_in_num=0 bad_out_num=0
[ID:
00000071] unique: 12694, opcode: READ (15), nodeid: 2, insize: 80, pid: 2014
[ID:
00000071] lo_read(ino=2, size=65536, off=131072)
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
added rework as suggested by Daniel P. Berrangé during review
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Eryu Guan [Fri, 9 Aug 2019 08:25:35 +0000 (16:25 +0800)]
virtiofsd: print log only when priority is high enough
Introduce "-o log_level=" command line option to specify current log
level (priority), valid values are "debug info warn err", e.g.
./virtiofsd -o log_level=debug ...
So only log priority higher than "debug" will be printed to
stderr/syslog. And the default level is info.
The "-o debug"/"-d" options are kept, and imply debug log level.
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
dgilbert: Reworked for libfuse's log_func
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
with fix by:
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Wed, 26 Jun 2019 09:25:54 +0000 (10:25 +0100)]
virtiofsd: add --syslog command-line option
Sometimes collecting output from stderr is inconvenient or does not fit
within the overall logging architecture. Add syslog(3) support for
cases where stderr cannot be used.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
dgilbert: Reworked as a logging function
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Fri, 22 Nov 2019 11:31:30 +0000 (11:31 +0000)]
virtiofsd: fix libfuse information leaks
Some FUSE message replies contain padding fields that are not
initialized by libfuse. This is fine in traditional FUSE applications
because the kernel is trusted. virtiofsd does not trust the guest and
must not expose uninitialized memory.
Use C struct initializers to automatically zero out memory. Not all of
these code changes are strictly necessary but they will prevent future
information leaks if the structs are extended.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Fri, 22 Mar 2019 15:54:13 +0000 (15:54 +0000)]
virtiofsd: set maximum RLIMIT_NOFILE limit
virtiofsd can exceed the default open file descriptor limit easily on
most systems. Take advantage of the fact that it runs as root to raise
the limit.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Vivek Goyal [Tue, 13 Aug 2019 19:29:44 +0000 (15:29 -0400)]
virtiofsd: Drop CAP_FSETID if client asked for it
If client requested killing setuid/setgid bits on file being written, drop
CAP_FSETID capability so that setuid/setgid bits are cleared upon write
automatically.
pjdfstest chown/12.t needs this.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
dgilbert: reworked for libcap-ng
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Tue, 3 Dec 2019 12:23:44 +0000 (12:23 +0000)]
virtiofsd: cap-ng helpers
libcap-ng reads /proc during capng_get_caps_process, and virtiofsd's
sandboxing doesn't have /proc mounted; thus we have to do the
caps read before we sandbox it and save/restore the state.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Vivek Goyal [Tue, 13 Aug 2019 19:29:42 +0000 (15:29 -0400)]
virtiofsd: Parse flag FUSE_WRITE_KILL_PRIV
Caller can set FUSE_WRITE_KILL_PRIV in write_flags. Parse it and pass it
to the filesystem.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Wed, 13 Mar 2019 09:32:51 +0000 (09:32 +0000)]
virtiofsd: add seccomp whitelist
Only allow system calls that are needed by virtiofsd. All other system
calls cause SIGSYS to be directed at the thread and the process will
coredump.
Restricting system calls reduces the kernel attack surface and limits
what the process can do when compromised.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
with additional entries by:
Signed-off-by: Ganesh Maharaj Mahalingam <ganesh.mahalingam@intel.com>
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: piaojun <piaojun@huawei.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Eric Ren <renzhen@linux.alibaba.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Wed, 16 Oct 2019 16:01:57 +0000 (17:01 +0100)]
virtiofsd: move to a new pid namespace
virtiofsd needs access to /proc/self/fd. Let's move to a new pid
namespace so that a compromised process cannot see another other
processes running on the system.
One wrinkle in this approach: unshare(CLONE_NEWPID) affects *child*
processes and not the current process. Therefore we need to fork the
pid 1 process that will actually run virtiofsd and leave a parent in
waitpid(2). This is not the same thing as daemonization and parent
processes should not notice a difference.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Wed, 16 Oct 2019 16:01:56 +0000 (17:01 +0100)]
virtiofsd: move to an empty network namespace
If the process is compromised there should be no network access. Use an
empty network namespace to sandbox networking.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Tue, 12 Mar 2019 15:51:38 +0000 (15:51 +0000)]
virtiofsd: sandbox mount namespace
Use a mount namespace with the shared directory tree mounted at "/" and
no other mounts.
This prevents symlink escape attacks because symlink targets are
resolved only against the shared directory and cannot go outside it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peng Tao <tao.peng@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Tue, 12 Mar 2019 15:48:50 +0000 (15:48 +0000)]
virtiofsd: use /proc/self/fd/ O_PATH file descriptor
Sandboxing will remove /proc from the mount namespace so we can no
longer build string paths into "/proc/self/fd/...".
Keep an O_PATH file descriptor so we can still re-open fds via
/proc/self/fd.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Tue, 5 Mar 2019 09:32:49 +0000 (09:32 +0000)]
virtiofsd: prevent ".." escape in lo_do_readdir()
Construct a fake dirent for the root directory's ".." entry. This hides
the parent directory from the FUSE client.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Mon, 4 Mar 2019 10:38:46 +0000 (10:38 +0000)]
virtiofsd: prevent ".." escape in lo_do_lookup()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Thu, 28 Feb 2019 16:38:31 +0000 (16:38 +0000)]
virtiofsd: check input buffer size in fuse_lowlevel.c ops
Each FUSE operation involves parsing the input buffer. Currently the
code assumes the input buffer is large enough for the expected
arguments. This patch uses fuse_mbuf_iter to check the size.
Most operations are simple to convert. Some are more complicated due to
variable-length inputs or different sizes depending on the protocol
version.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Thu, 28 Feb 2019 11:25:32 +0000 (11:25 +0000)]
virtiofsd: validate input buffer sizes in do_write_buf()
There is a small change in behavior: if fuse_write_in->size doesn't
match the input buffer size then the request is failed. Previously
write requests with 1 fuse_buf element would truncate to
fuse_write_in->size.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Thu, 28 Feb 2019 10:30:20 +0000 (10:30 +0000)]
virtiofsd: add fuse_mbuf_iter API
Introduce an API for consuming bytes from a buffer with size checks.
All FUSE operations will be converted to use this safe API instead of
void *inarg.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Fri, 4 Jan 2019 16:47:39 +0000 (16:47 +0000)]
virtiofsd: Pass write iov's all the way through
Pass the write iov pointing to guest RAM all the way through rather
than copying the data.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Fri, 4 Jan 2019 18:23:00 +0000 (18:23 +0000)]
virtiofsd: Plumb fuse_bufvec through to do_write_buf
Let fuse_session_process_buf_int take a fuse_bufvec * instead of a
fuse_buf; and then through to do_write_buf - where in the best
case it can pass that straight through to op.write_buf without copying
(other than skipping a header).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Tue, 26 Feb 2019 17:58:59 +0000 (17:58 +0000)]
virtiofsd: validate path components
Several FUSE requests contain single path components. A correct FUSE
client sends well-formed path components but there is currently no input
validation in case something went wrong or the client is malicious.
Refuse ".", "..", and paths containing '/' when we expect a path
component.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Miklos Szeredi [Wed, 14 Nov 2018 15:52:03 +0000 (16:52 +0100)]
virtiofsd: passthrough_ll: add fallback for racy ops
We have two operations that cannot be done race-free on a symlink in
certain cases: utimes and link.
Add racy fallback for these if the race-free method doesn't work. We do
our best to avoid races even in this case:
- get absolute path by reading /proc/self/fd/NN symlink
- lookup parent directory: after this we are safe against renames in
ancestors
- lookup name in parent directory, and verify that we got to the original
inode, if not retry the whole thing
Both utimes(2) and link(2) hold i_lock on the inode across the operation,
so a racing rename/delete by this fuse instance is not possible, only from
other entities changing the filesystem.
If the "norace" option is given, then disable the racy fallbacks.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Thu, 31 Jan 2019 06:02:40 +0000 (14:02 +0800)]
virtiofsd: passthrough_ll: add fd_map to hide file descriptors
Do not expose file descriptor numbers to clients. This prevents the
abuse of internal file descriptors (like stdin/stdout).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix from:
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
dgilbert:
Added lseek
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Thu, 31 Jan 2019 06:01:28 +0000 (14:01 +0800)]
virtiofsd: passthrough_ll: add dirp_map to hide lo_dirp pointers
Do not expose lo_dirp pointers to clients.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Thu, 31 Jan 2019 04:57:34 +0000 (12:57 +0800)]
virtiofsd: passthrough_ll: add ino_map to hide lo_inode pointers
Do not expose lo_inode pointers to clients.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Thu, 31 Jan 2019 04:49:39 +0000 (12:49 +0800)]
virtiofsd: passthrough_ll: add lo_map for ino/fh indirection
A layer of indirection is needed because passthrough_ll cannot expose
pointers or file descriptor numbers to untrusted clients. Malicious
clients could send invalid pointers or file descriptors in order to
crash or exploit the file system daemon.
lo_map provides an integer key->value mapping. This will be used for
ino and fh fields in the patches that follow.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Vivek Goyal [Wed, 15 Aug 2018 15:05:29 +0000 (17:05 +0200)]
virtiofsd: passthrough_ll: create new files in caller's context
We need to create files in the caller's context. Otherwise after
creating a file, the caller might not be able to do file operations on
that file.
Changed effective uid/gid to caller's uid/gid, create file and then
switch back to uid/gid 0.
Use syscall(setresuid, ...) otherwise glibc does some magic to change EUID
in all threads, which is not what we want.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Mon, 21 Oct 2019 10:41:36 +0000 (11:41 +0100)]
virtiofs: Add maintainers entry
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Tue, 27 Aug 2019 09:54:35 +0000 (10:54 +0100)]
virtiofsd: add --print-capabilities option
Add the --print-capabilities option as per vhost-user.rst "Backend
programs conventions". Currently there are no advertised features.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Tue, 27 Aug 2019 09:54:37 +0000 (10:54 +0100)]
virtiofsd: add vhost-user.json file
Install a vhost-user.json file describing virtiofsd. This allows
libvirt and other management tools to enumerate vhost-user backend
programs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Tue, 27 Aug 2019 09:54:34 +0000 (10:54 +0100)]
virtiofsd: make -f (foreground) the default
According to vhost-user.rst "Backend program conventions", backend
programs should run in the foregound by default. Follow the
conventions so libvirt and other management tools can control virtiofsd
in a standard way.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Tue, 25 Jun 2019 16:18:00 +0000 (17:18 +0100)]
virtiofsd: add --fd=FDNUM fd passing option
Although --socket-path=PATH is useful for manual invocations, management
tools typically create the UNIX domain socket themselves and pass it to
the vhost-user device backend. This way QEMU can be launched
immediately with a valid socket. No waiting for the vhost-user device
backend is required when fd passing is used.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Wed, 15 Aug 2018 19:26:05 +0000 (20:26 +0100)]
virtiofsd: Fast path for virtio read
Readv the data straight into the guests buffer.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With fix by:
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Thu, 7 Feb 2019 12:17:21 +0000 (12:17 +0000)]
virtiofsd: Add Makefile wiring for virtiofsd contrib
Wire up the building of the virtiofsd in tools.
virtiofsd relies on Linux-specific system calls and seccomp. Anyone
wishing to port it to other host operating systems should do so
carefully and without reducing security.
Only allow building on Linux hosts.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Thu, 21 Jun 2018 09:38:03 +0000 (10:38 +0100)]
virtiofsd: Keep track of replies
Keep track of whether we sent a reply to a request; this is a bit
paranoid but it means:
a) We should always recycle an element even if there was an error
in the request
b) Never try and send two replies on one queue element
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Mon, 18 Jun 2018 17:46:01 +0000 (18:46 +0100)]
virtiofsd: Send replies to messages
Route fuse out messages back through the same queue elements
that had the command that triggered the request.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Thu, 14 Jun 2018 18:52:23 +0000 (19:52 +0100)]
virtiofsd: Start reading commands from queue
Pop queue elements off queues, copy the data from them and
pass that to fuse.
Note: 'out' in a VuVirtqElement is from QEMU
'in' in libfuse is into the daemon
So we read from the out iov's to get a fuse_in_header
When we get a kick we've got to read all the elements until the queue
is empty.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Thu, 14 Jun 2018 11:07:07 +0000 (12:07 +0100)]
virtiofsd: Poll kick_fd for queue
In the queue thread poll the kick_fd we're passed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Wed, 13 Jun 2018 19:17:51 +0000 (20:17 +0100)]
virtiofsd: Start queue threads
Start a thread for each queue when we get notified it's been started.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
fix by:
Signed-off-by: Jun Piao <piaojun@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Wed, 13 Jun 2018 19:17:17 +0000 (20:17 +0100)]
virtiofsd: get/set features callbacks
Add the get/set features callbacks.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Tue, 12 Jun 2018 15:31:24 +0000 (16:31 +0100)]
virtiofsd: Add main virtio loop
Processes incoming requests on the vhost-user fd.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Fri, 8 Jun 2018 18:59:20 +0000 (19:59 +0100)]
virtiofsd: Start wiring up vhost-user
Listen on our unix socket for the connection from QEMU, when we get it
initialise vhost-user and dive into our own loop variant (currently
dummy).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Thu, 7 Jun 2018 19:11:14 +0000 (20:11 +0100)]
virtiofsd: Open vhost connection instead of mounting
When run with vhost-user options we conect to the QEMU instead
via a socket. Start this off by creating the socket.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Fri, 8 Mar 2019 12:23:55 +0000 (12:23 +0000)]
virtiofsd: add -o source=PATH to help output
The -o source=PATH option will be used by most command-line invocations.
Let's document it!
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Thu, 7 Jun 2018 16:22:33 +0000 (17:22 +0100)]
virtiofsd: Add options for virtio
Add options to specify parameters for virtio-fs paths, i.e.
./virtiofsd -o vhost_user_socket=/tmp/vhostqemu
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Vivek Goyal [Thu, 30 Aug 2018 18:22:10 +0000 (14:22 -0400)]
virtiofsd: Make fsync work even if only inode is passed in
If caller has not sent file handle in request, then using inode, retrieve
the fd opened using O_PATH and use that to open file again and issue
fsync. This will be needed when dax_flush() calls fsync. At that time
we only have inode information (and not file).
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Xiao Yang [Mon, 13 Jan 2020 09:37:34 +0000 (17:37 +0800)]
vitriofsd/passthrough_ll: fix fallocate() ifdefs
1) Use correct CONFIG_FALLOCATE macro to check if fallocate() is supported.(i.e configure
script sets CONFIG_FALLOCATE intead of HAVE_FALLOCATE if fallocate() is supported)
2) Replace HAVE_POSIX_FALLOCATE with CONFIG_POSIX_FALLOCATE.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merged from two of Xiao Yang's patches
Dr. David Alan Gilbert [Wed, 27 Nov 2019 17:31:24 +0000 (17:31 +0000)]
virtiofsd: Trim out compatibility code
virtiofsd only supports major=7, minor>=31; trim out a lot of
old compatibility code.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Fri, 8 Feb 2019 11:48:42 +0000 (11:48 +0000)]
virtiofsd: Fix common header and define for QEMU builds
All of the fuse files include config.h and define GNU_SOURCE
where we don't have either under our build - remove them.
Fixup path to the kernel's fuse.h in the QEMUs world.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Fri, 8 Feb 2019 16:05:24 +0000 (16:05 +0000)]
virtiofsd: Fix fuse_daemonize ignored return values
QEMU's compiler enables warnings/errors for ignored values
and the (void) trick used in the fuse code isn't enough.
Turn all the return values into a return value on the function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Xiao Yang [Wed, 22 Jan 2020 02:40:08 +0000 (10:40 +0800)]
virtiofsd: Remove unused enum fuse_buf_copy_flags
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Thu, 28 Feb 2019 11:22:58 +0000 (11:22 +0000)]
virtiofsd: remove unused notify reply support
Notify reply support is unused by virtiofsd. The code would need to be
updated to validate input buffer sizes. Remove this unused code since
changes to it are untestable.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Stefan Hajnoczi [Fri, 8 Mar 2019 13:24:31 +0000 (13:24 +0000)]
virtiofsd: remove mountpoint dummy argument
Classic FUSE file system daemons take a mountpoint argument but
virtiofsd exposes a vhost-user UNIX domain socket instead. The
mountpoint argument is not used by virtiofsd but the user is still
required to pass a dummy argument on the command-line.
Remove the mountpoint argument to clean up the command-line.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Mon, 9 Dec 2019 19:53:47 +0000 (19:53 +0000)]
virtiofsd: Format imported files to qemu style
Mostly using a set like:
indent -nut -i 4 -nlp -br -cs -ce --no-space-after-function-call-names file
clang-format -style=file -i -- file
clang-tidy -fix-errors -checks=readability-braces-around-statements file
clang-format -style=file -i -- file
With manual cleanups.
The .clang-format used is below.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed by: Aleksandar Markovic <amarkovic@wavecomp.com>
Language: Cpp
AlignAfterOpenBracket: Align
AlignConsecutiveAssignments: false # although we like it, it creates churn
AlignConsecutiveDeclarations: false
AlignEscapedNewlinesLeft: true
AlignOperands: true
AlignTrailingComments: false # churn
AllowAllParametersOfDeclarationOnNextLine: true
AllowShortBlocksOnASingleLine: false
AllowShortCaseLabelsOnASingleLine: false
AllowShortFunctionsOnASingleLine: None
AllowShortIfStatementsOnASingleLine: false
AllowShortLoopsOnASingleLine: false
AlwaysBreakAfterReturnType: None # AlwaysBreakAfterDefinitionReturnType is taken into account
AlwaysBreakBeforeMultilineStrings: false
BinPackArguments: true
BinPackParameters: true
BraceWrapping:
AfterControlStatement: false
AfterEnum: false
AfterFunction: true
AfterStruct: false
AfterUnion: false
BeforeElse: false
IndentBraces: false
BreakBeforeBinaryOperators: None
BreakBeforeBraces: Custom
BreakBeforeTernaryOperators: false
BreakStringLiterals: true
ColumnLimit: 80
ContinuationIndentWidth: 4
Cpp11BracedListStyle: false
DerivePointerAlignment: false
DisableFormat: false
ForEachMacros: [
'CPU_FOREACH',
'CPU_FOREACH_REVERSE',
'CPU_FOREACH_SAFE',
'IOMMU_NOTIFIER_FOREACH',
'QLIST_FOREACH',
'QLIST_FOREACH_ENTRY',
'QLIST_FOREACH_RCU',
'QLIST_FOREACH_SAFE',
'QLIST_FOREACH_SAFE_RCU',
'QSIMPLEQ_FOREACH',
'QSIMPLEQ_FOREACH_SAFE',
'QSLIST_FOREACH',
'QSLIST_FOREACH_SAFE',
'QTAILQ_FOREACH',
'QTAILQ_FOREACH_REVERSE',
'QTAILQ_FOREACH_SAFE',
'QTAILQ_RAW_FOREACH',
'RAMBLOCK_FOREACH'
]
IncludeCategories:
- Regex: '^"qemu/osdep.h'
Priority: -3
- Regex: '^"(block|chardev|crypto|disas|exec|fpu|hw|io|libdecnumber|migration|monitor|net|qapi|qemu|qom|standard-headers|sysemu|ui)/'
Priority: -2
- Regex: '^"(elf.h|qemu-common.h|glib-compat.h|qemu-io.h|trace-tcg.h)'
Priority: -1
- Regex: '.*'
Priority: 1
IncludeIsMainRegex: '$'
IndentCaseLabels: false
IndentWidth: 4
IndentWrappedFunctionNames: false
KeepEmptyLinesAtTheStartOfBlocks: false
MacroBlockBegin: '.*_BEGIN$' # only PREC_BEGIN ?
MacroBlockEnd: '.*_END$'
MaxEmptyLinesToKeep: 2
PointerAlignment: Right
ReflowComments: true
SortIncludes: true
SpaceAfterCStyleCast: false
SpaceBeforeAssignmentOperators: true
SpaceBeforeParens: ControlStatements
SpaceInEmptyParentheses: false
SpacesBeforeTrailingComments: 1
SpacesInContainerLiterals: true
SpacesInParentheses: false
SpacesInSquareBrackets: false
Standard: Auto
UseTab: Never
...
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Fri, 8 Feb 2019 12:49:54 +0000 (12:49 +0000)]
virtiofsd: Trim down imported files
There's a lot of the original fuse code we don't need; trim them down.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
with additional trimming by:
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Thu, 28 Nov 2019 12:22:49 +0000 (12:22 +0000)]
virtiofsd: Add passthrough_ll
passthrough_ll is one of the examples in the upstream fuse project
and is the main part of our daemon here. It passes through requests
from fuse to the underlying filesystem, using syscalls as directly
as possible.
From libfuse fuse-3.8.0
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up 'GPL' to 'GPLv2' as per Dan's comments and consistent
with the 'LICENSE' file in libfuse; patch sent to libfuse to fix
it upstream.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Thu, 28 Nov 2019 12:22:49 +0000 (12:22 +0000)]
virtiofsd: Add fuse_lowlevel.c
fuse_lowlevel is one of the largest files from the library
and does most of the work. Add it separately to keep the diff
sizes small.
Again this is from upstream fuse-3.8.0
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Thu, 28 Nov 2019 12:22:49 +0000 (12:22 +0000)]
virtiofsd: Add auxiliary .c's
Add most of the non-main .c files we need from upstream fuse-3.8.0
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Mon, 30 Sep 2019 13:01:47 +0000 (14:01 +0100)]
virtiofsd: Pull in kernel's fuse.h
Update scripts/update-linux-headers.sh to add fuse.h and
use it to pull in fuse.h from the kernel; from v5.5-rc1
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dr. David Alan Gilbert [Thu, 28 Nov 2019 12:22:49 +0000 (12:22 +0000)]
virtiofsd: Pull in upstream headers
Pull in headers fromlibfuse's upstream fuse-3.8.0
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Peter Maydell [Thu, 23 Jan 2020 14:38:43 +0000 (14:38 +0000)]
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.0-pull-request' into staging
Fix mmap guest space and brk
Add FS/FD/RTC/KCOV ioctls
# gpg: Signature made Thu 23 Jan 2020 08:21:41 GMT
# gpg: using RSA key
CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-5.0-pull-request:
linux-user: Add support for read/clear RTC voltage low detector using ioctls
linux-user: Add support for getting/setting RTC PLL correction using ioctls
linux-user: Add support for getting/setting RTC wakeup alarm using ioctls
linux-user: Add support for getting/setting RTC periodic interrupt and epoch using ioctls
linux-user: Add support for getting/setting RTC time and alarm using ioctls
linux-user: Add support for enabling/disabling RTC features using ioctls
linux-user: Add support for TYPE_LONG and TYPE_ULONG in do_ioctl()
linux-user: Add support for KCOV_INIT_TRACE ioctl
linux-user: Add support for KCOV_<ENABLE|DISABLE> ioctls
configure: Detect kcov support and introduce CONFIG_KCOV
linux-user: Add support for FDFMT<BEG|TRK|END> ioctls
linux-user: Add support for FD<SETEMSGTRESH|SETMAXERRS|GETMAXERRS> ioctls
linux-user: Add support for FS_IOC32_<GET|SET>VERSION ioctls
linux-user: Add support for FS_IOC32_<GET|SET>FLAGS ioctls
linux-user: Add support for FS_IOC_<GET|SET>VERSION ioctls
linux-user: Reserve space for brk
linux-user:Fix align mistake when mmap guest space
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 23 Jan 2020 13:41:47 +0000 (13:41 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pc: fixes, features
Bugfixes all over the place.
CPU hotplug with secureboot.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 23 Jan 2020 07:08:32 GMT
# gpg: using RSA key
5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
vhost: coding style fix
i386:acpi: Remove _HID from the SMBus ACPI entry
vhost: Only align sections for vhost-user
vhost: Add names to section rounded warning
vhost-vsock: delete vqs in vhost_vsock_unrealize to avoid memleaks
virtio-scsi: convert to new virtio_delete_queue
virtio-scsi: delete vqs in unrealize to avoid memleaks
virtio-9p-device: convert to new virtio_delete_queue
virtio-9p-device: fix memleak in virtio_9p_device_unrealize
bios-tables-test: document expected file update
acpi: cpuhp: add CPHP_GET_CPU_ID_CMD command
acpi: cpuhp: spec: add typical usecases
acpi: cpuhp: introduce 'Command data 2' field
acpi: cpuhp: spec: clarify store into 'Command data' when 'Command field' == 0
acpi: cpuhp: spec: fix 'Command data' description
acpi: cpuhp: spec: clarify 'CPU selector' register usage and endianness
tests: q35: MCH: add default SMBASE SMRAM lock test
q35: implement 128K SMRAM at default SMBASE address
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 23 Jan 2020 13:01:14 +0000 (13:01 +0000)]
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-
20200121' into staging
Remove another limit to NB_MMU_MODES.
Fix compilation using uclibc.
Fix defaulting of -accel parameters.
Tidy cputlb basic routines.
Adjust git.orderfile for decodetree.
# gpg: Signature made Wed 22 Jan 2020 02:44:18 GMT
# gpg: using RSA key
7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-
20200121:
scripts/git.orderfile: Display decodetree before C source
cputlb: Hoist timestamp outside of loops over tlbs
cputlb: Initialize tlbs as flushed
cputlb: Partially merge tlb_dyn_init into tlb_init
cputlb: Split out tlb_mmu_flush_locked
cputlb: Hoist tlb portions in tlb_flush_one_mmuidx_locked
cputlb: Hoist tlb portions in tlb_mmu_resize_locked
cputlb: Pass CPUTLBDescFast to tlb_n_entries and sizeof_tlb
cputlb: Make tlb_n_entries private to cputlb.c
cputlb: Merge tlb_table_flush_by_mmuidx into tlb_flush_one_mmuidx_locked
vl: Only choose enabled accelerators in configure_accelerators
vl: Remove useless test in configure_accelerators
vl: Reduce scope of variables in configure_accelerators
vl: Remove unused variable in configure_accelerators
util/cacheinfo: fix crash when compiling with uClibc
cputlb: Handle NB_MMU_MODES > TARGET_PAGE_BITS_MIN
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Michael S. Tsirkin [Wed, 22 Jan 2020 08:06:47 +0000 (03:06 -0500)]
vhost: coding style fix
Drop a trailing whitespace. Make line shorter.
Fixes:
76525114736e8 ("vhost: Only align sections for vhost-user")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Filip Bozuta [Wed, 15 Jan 2020 19:36:40 +0000 (20:36 +0100)]
linux-user: Add support for read/clear RTC voltage low detector using ioctls
This patch implements functionalities of following ioctls:
RTC_VL_READ - Read voltage low detection information
Read the voltage low for RTCs that support voltage low.
The third ioctl's' argument points to an int in which
the voltage low is returned.
RTC_VL_CLR - Clear voltage low information
Clear the information about voltage low for RTCs that
support voltage low. The third ioctl(2) argument is
ignored.
Implementation notes:
Since one ioctl has a pointer to 'int' as its third agrument,
and another ioctl has NULL as its third argument, their
implementation was straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <
1579117007-7565-7-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Filip Bozuta [Wed, 15 Jan 2020 19:36:39 +0000 (20:36 +0100)]
linux-user: Add support for getting/setting RTC PLL correction using ioctls
This patch implements functionalities of following ioctls:
RTC_PLL_GET - Getting PLL correction
Read the PLL correction for RTCs that support PLL. The PLL correction
is returned in the following structure:
struct rtc_pll_info {
int pll_ctrl; /* placeholder for fancier control */
int pll_value; /* get/set correction value */
int pll_max; /* max +ve (faster) adjustment value */
int pll_min; /* max -ve (slower) adjustment value */
int pll_posmult; /* factor for +ve correction */
int pll_negmult; /* factor for -ve correction */
long pll_clock; /* base PLL frequency */
};
A pointer to this structure should be passed as the third
ioctl's argument.
RTC_PLL_SET - Setting PLL correction
Sets the PLL correction for RTCs that support PLL. The PLL correction
that is set is specified by the rtc_pll_info structure pointed to by
the third ioctl's' argument.
Implementation notes:
All ioctls in this patch have a pointer to a structure rtc_pll_info
as their third argument. All elements of this structure are of
type 'int', except the last one that is of type 'long'. That is
the reason why a separate target structure (target_rtc_pll_info)
is defined in linux-user/syscall_defs. The rest of the
implementation is straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <
1579117007-7565-6-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Filip Bozuta [Wed, 15 Jan 2020 19:36:38 +0000 (20:36 +0100)]
linux-user: Add support for getting/setting RTC wakeup alarm using ioctls
This patch implements functionalities of following ioctls:
RTC_WKALM_SET, RTC_WKALM_GET - Getting/Setting wakeup alarm
Some RTCs support a more powerful alarm interface, using these
ioctls to read or write the RTC's alarm time (respectively)
with this structure:
struct rtc_wkalrm {
unsigned char enabled;
unsigned char pending;
struct rtc_time time;
};
The enabled flag is used to enable or disable the alarm
interrupt, or to read its current status; when using these
calls, RTC_AIE_ON and RTC_AIE_OFF are not used. The pending
flag is used by RTC_WKALM_RD to report a pending interrupt
(so it's mostly useless on Linux, except when talking to the
RTC managed by EFI firmware). The time field is as used with
RTC_ALM_READ and RTC_ALM_SET except that the tm_mday, tm_mon,
and tm_year fields are also valid. A pointer to this structure
should be passed as the third ioctl's argument.
Implementation notes:
All ioctls in this patch have a pointer to a structure
rtc_wkalrm as their third argument. That is the reason why
corresponding definition is added in linux-user/syscall_types.h.
Since all elements of this structure are either of type
'unsigned char' or 'struct rtc_time' (that was covered in one
of previous patches), the rest of the implementation is
straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <
1579117007-7565-5-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Filip Bozuta [Wed, 15 Jan 2020 19:36:37 +0000 (20:36 +0100)]
linux-user: Add support for getting/setting RTC periodic interrupt and epoch using ioctls
This patch implements functionalities of following ioctls:
RTC_IRQP_READ, RTC_IRQP_SET - Getting/Setting IRQ rate
Read and set the frequency for periodic interrupts, for RTCs
that support periodic interrupts. The periodic interrupt must
be separately enabled or disabled using the RTC_PIE_ON,
RTC_PIE_OFF requests. The third ioctl's argument is an
unsigned long * or an unsigned long, respectively. The value
is the frequency in interrupts per second. The set of allow‐
able frequencies is the multiples of two in the range 2 to
8192. Only a privileged process (i.e., one having the
CAP_SYS_RESOURCE capability) can set frequencies above the
value specified in /proc/sys/dev/rtc/max-user-freq. (This
file contains the value 64 by default.)
RTC_EPOCH_READ, RTC_EPOCH_SET - Getting/Setting epoch
Many RTCs encode the year in an 8-bit register which is either
interpreted as an 8-bit binary number or as a BCD number. In
both cases, the number is interpreted relative to this RTC's
Epoch. The RTC's Epoch is initialized to 1900 on most systems
but on Alpha and MIPS it might also be initialized to 1952,
1980, or 2000, depending on the value of an RTC register for
the year. With some RTCs, these operations can be used to
read or to set the RTC's Epoch, respectively. The third
ioctl's argument is an unsigned long * or an unsigned long,
respectively, and the value returned (or assigned) is the
Epoch. To set the RTC's Epoch the process must be privileged
(i.e., have the CAP_SYS_TIME capability).
Implementation notes:
All ioctls in this patch have a pointer to 'ulong' as their
third argument. That is the reason why corresponding parts
of added code in linux-user/syscall_defs.h contain special
handling related to 'ulong' type: they use 'abi_ulong' type
to make sure that ioctl's code is calculated correctly for
both 32-bit and 64-bit targets. Also, 'MK_PTR(TYPE_ULONG)'
is used for the similar reason in linux-user/ioctls.h.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <
1579117007-7565-4-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Filip Bozuta [Wed, 15 Jan 2020 19:36:36 +0000 (20:36 +0100)]
linux-user: Add support for getting/setting RTC time and alarm using ioctls
This patch implements functionalities of following ioctls:
RTC_RD_TIME - Getting RTC time
Returns this RTC's time in the following structure:
struct rtc_time {
int tm_sec;
int tm_min;
int tm_hour;
int tm_mday;
int tm_mon;
int tm_year;
int tm_wday; /* unused */
int tm_yday; /* unused */
int tm_isdst; /* unused */
};
The fields in this structure have the same meaning and ranges
as the tm structure described in gmtime man page. A pointer
to this structure should be passed as the third ioctl's argument.
RTC_SET_TIME - Setting RTC time
Sets this RTC's time to the time specified by the rtc_time
structure pointed to by the third ioctl's argument. To set
the RTC's time the process must be privileged (i.e., have the
CAP_SYS_TIME capability).
RTC_ALM_READ, RTC_ALM_SET - Getting/Setting alarm time
Read and set the alarm time, for RTCs that support alarms.
The alarm interrupt must be separately enabled or disabled
using the RTC_AIE_ON, RTC_AIE_OFF requests. The third
ioctl's argument is a pointer to a rtc_time structure. Only
the tm_sec, tm_min, and tm_hour fields of this structure are
used.
Implementation notes:
All ioctls in this patch have pointer to a structure rtc_time
as their third argument. That is the reason why corresponding
definition is added in linux-user/syscall_types.h. Since all
elements of this structure are of type 'int', the rest of the
implementation is straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <
1579117007-7565-3-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Filip Bozuta [Wed, 15 Jan 2020 19:36:35 +0000 (20:36 +0100)]
linux-user: Add support for enabling/disabling RTC features using ioctls
This patch implements functionalities of following ioctls:
RTC_AIE_ON, RTC_AIE_OFF - Alarm interrupt enabling on/off
Enable or disable the alarm interrupt, for RTCs that support
alarms. The third ioctl's argument is ignored.
RTC_UIE_ON, RTC_UIE_OFF - Update interrupt enabling on/off
Enable or disable the interrupt on every clock update, for
RTCs that support this once-per-second interrupt. The third
ioctl's argument is ignored.
RTC_PIE_ON, RTC_PIE_OFF - Periodic interrupt enabling on/off
Enable or disable the periodic interrupt, for RTCs that sup‐
port these periodic interrupts. The third ioctl's argument
is ignored. Only a privileged process (i.e., one having the
CAP_SYS_RESOURCE capability) can enable the periodic interrupt
if the frequency is currently set above the value specified in
/proc/sys/dev/rtc/max-user-freq.
RTC_WIE_ON, RTC_WIE_OFF - Watchdog interrupt enabling on/off
Enable or disable the Watchdog interrupt, for RTCs that sup-
port this Watchdog interrupt. The third ioctl's argument is
ignored.
Implementation notes:
Since all of involved ioctls have NULL as their third argument,
their implementation was straightforward.
The line '#include <linux/rtc.h>' was added to recognize
preprocessor definitions for these ioctls. This needs to be
done only once in this series of commits. Also, the content
of this file (with respect to ioctl definitions) remained
unchanged for a long time, therefore there is no need to
worry about supporting older Linux kernel version.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <
1579117007-7565-2-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Filip Bozuta [Wed, 15 Jan 2020 19:36:47 +0000 (20:36 +0100)]
linux-user: Add support for TYPE_LONG and TYPE_ULONG in do_ioctl()
Function "do_ioctl()" located in file "syscall.c" was missing
an option for TYPE_LONG and TYPE_ULONG. This caused some ioctls
to not be recognised because they had the third argument that was
of type 'long' or 'unsigned long'.
For example:
Since implemented ioctls RTC_IRQP_SET and RTC_EPOCH_SET
are of type IOW(writing type) that have unsigned long as
their third argument, they were not recognised in QEMU
before the changes of this patch.
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <
1579117007-7565-14-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Aleksandar Markovic [Thu, 16 Jan 2020 22:49:51 +0000 (23:49 +0100)]
linux-user: Add support for KCOV_INIT_TRACE ioctl
KCOV_INIT_TRACE ioctl plays the role in kernel coverage tracing.
This ioctl's third argument is of type 'unsigned long', and the
implementation in QEMU is straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1579214991-19602-13-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Aleksandar Markovic [Thu, 16 Jan 2020 22:49:50 +0000 (23:49 +0100)]
linux-user: Add support for KCOV_<ENABLE|DISABLE> ioctls
KCOV_ENABLE and KCOV_DISABLE play the role in kernel coverage
tracing. These ioctls do not use the third argument of ioctl()
system call and are straightforward to implement in QEMU.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1579214991-19602-12-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Aleksandar Markovic [Thu, 16 Jan 2020 22:49:49 +0000 (23:49 +0100)]
configure: Detect kcov support and introduce CONFIG_KCOV
kcov is kernel code coverage tracing tool. It requires kernel 4.4+
compiled with certain kernel options.
This patch checks if kcov header "sys/kcov.h" is present on build
machine, and stores the result in variable CONFIG_KCOV, meant to
be used in linux-user code related to the support for three ioctls
that were introduced at the same time as the mentioned header
(their definition was a part of the first version of that header).
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <
1579214991-19602-11-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Aleksandar Markovic [Thu, 16 Jan 2020 22:49:47 +0000 (23:49 +0100)]
linux-user: Add support for FDFMT<BEG|TRK|END> ioctls
FDFMTBEG, FDFMTTRK, and FDFMTEND ioctls provide means for controlling
formatting of a floppy drive.
FDFMTTRK's third agrument is a pointer to the structure:
struct format_descr {
unsigned int device,head,track;
};
defined in Linux kernel header <linux/fd.h>.
Since all fields of the structure are of type 'unsigned int', there is
no need to define "target_format_descr".
FDFMTBEG and FDFMTEND ioctls do not use the third argument.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
1579214991-19602-9-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>