OSDN Git Service
Bjorn Helgaas [Mon, 2 Jun 2014 22:18:48 +0000 (16:18 -0600)]
Merge branch 'pci/iommu' into next
* pci/iommu:
PCI: Add bridge DMA alias quirk for ASMedia and Tundra bridges
PCI: Add support for PCIe-to-PCI bridge DMA alias quirks
PCI: Add function 1 DMA alias quirk for Marvell devices
PCI: Add function 0 DMA alias quirk for Ricoh devices
PCI: Add support for DMA alias quirks
PCI: Convert pci_dev_flags definitions to bit shifts
PCI: Add DMA alias iterator
Bjorn Helgaas [Fri, 30 May 2014 17:41:17 +0000 (11:41 -0600)]
Merge branches 'pci/host-exynos', 'pci/host-imx6', 'pci/resource' and 'pci/misc' into next
* pci/host-exynos:
PCI: exynos: Fix add_pcie_port() section mismatch warning
* pci/host-imx6:
PCI: imx6: Add support for MSI
PCI: designware: Make MSI ISR shared IRQ aware
PCI: imx6: Remove optional (and unused) IRQs
PCI: imx6: Drop old IRQ mapping
PCI: imx6: Use new clock names
PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning
* pci/resource:
i82875p_edac: Assign PCI resources before adding device
* pci/misc:
ARM/PCI: Call pcie_bus_configure_settings() to set MPS
PCI: Make pci_bus_add_device() void
Conflicts:
drivers/edac/i82875p_edac.c
Bjorn Helgaas [Fri, 30 May 2014 17:40:13 +0000 (11:40 -0600)]
Merge branch 'pci/host-generic' into next
* pci/host-generic:
MAINTAINERS: Add generic PCI host controller driver
PCI: generic: Add generic PCI host controller driver
Conflicts:
drivers/pci/host/Kconfig
drivers/pci/host/Makefile
Will Deacon [Thu, 1 May 2014 11:04:28 +0000 (12:04 +0100)]
MAINTAINERS: Add generic PCI host controller driver
Add myself as the maintainer for the generic PCI host controller driver.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Will Deacon [Fri, 22 Nov 2013 16:14:41 +0000 (16:14 +0000)]
PCI: generic: Add generic PCI host controller driver
Add support for a generic PCI host controller, such as a
firmware-initialised device with static windows or an emulation by
something such as kvmtool.
The controller itself has no configuration registers and has its address
spaces described entirely by the device-tree (using the bindings from
ePAPR). Both CAM and ECAM are supported for Config Space accesses.
Add corresponding documentation for the DT binding.
[bhelgaas: currently uses the ARM-specific pci_common_init_dev() interface]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Lucas Stach [Fri, 28 Mar 2014 16:52:59 +0000 (17:52 +0100)]
PCI: imx6: Add support for MSI
This patch adds support for Message Signaled Interrupts in the imx6-pcie
driver.
Signed-off-by: Harro Haan <hrhaan@gmail.com>
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <r65037@freescale.com>
Lucas Stach [Fri, 28 Mar 2014 16:52:58 +0000 (17:52 +0100)]
PCI: designware: Make MSI ISR shared IRQ aware
On i.MX6 the host controller MSI IRQ is shared with PCI legacy INTD. Make
sure we don't bail too early from the IRQ handler.
The issue is fairly theoretical as it would require a system setup with a
PCIe switch where one connected device is using legacy INTD and another one
using MSI, but better fix it now.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Richard Zhu <r65037@freescale.com>
Lucas Stach [Fri, 28 Mar 2014 16:52:57 +0000 (17:52 +0100)]
PCI: imx6: Remove optional (and unused) IRQs
They are dropped with the new binding.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <r65037@freescale.com>
Lucas Stach [Fri, 28 Mar 2014 16:52:56 +0000 (17:52 +0100)]
PCI: imx6: Drop old IRQ mapping
We don't need this anymore. The IRQs are now properly mapped through the
DT.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <r65037@freescale.com>
Lucas Stach [Fri, 28 Mar 2014 16:52:55 +0000 (17:52 +0100)]
PCI: imx6: Use new clock names
As defined in the new binding.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <r65037@freescale.com>
Yinghai Lu [Tue, 7 May 2013 23:29:31 +0000 (16:29 -0700)]
i82875p_edac: Assign PCI resources before adding device
Assign PCI resources before pci_bus_add_device(). The resources must be
assigned before a driver can claim the device.
[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Murali Karicheri [Wed, 28 May 2014 17:14:53 +0000 (13:14 -0400)]
ARM/PCI: Call pcie_bus_configure_settings() to set MPS
Call pcie_bus_configure_settings() on ARM, like for other platforms.
pcie_bus_configure_settings() makes sure the MPS across the bus is uniform
and provides the ability to tune the MRSS and MPS to higher performance
values. This is particularly important for embedded where there is no
firmware to program these PCIe settings for the OS.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
Sachin Kamat [Fri, 30 May 2014 06:38:48 +0000 (12:08 +0530)]
PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning
imx6_add_pcie_port() is called only from from imx6_pcie_probe() which is
annotated with __init. Thus it makes sense to annotate
imx6_add_pcie_port() with __init to avoid section mismatch warnings.
[bhelgaas: changelog]
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sean Cross <xobs@kosagi.com>
Yijing Wang [Fri, 30 May 2014 03:01:03 +0000 (11:01 +0800)]
PCI: Make pci_bus_add_device() void
pci_bus_add_device() always returns 0, so there's no point in returning
anything at all. Make it a void function and remove the tests of the
return value from the callers.
[bhelgaas: changelog, remove unused "err" from i82875p_setup_overfl_dev()]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Sachin Kamat [Wed, 28 May 2014 09:48:45 +0000 (15:18 +0530)]
PCI: exynos: Fix add_pcie_port() section mismatch warning
add_pcie_port() is called only from exynos_pcie_probe(), which is annotated
with __init. Thus it makes sense to annotate add_pcie_port() with __init
to avoid the following section mismatch warning:
WARNING: drivers/pci/built-in.o(.text.unlikely+0xf8): Section mismatch in reference from the function add_pcie_port() to the function .init.text:dw_pcie_host_init()
The function add_pcie_port() references
the function __init dw_pcie_host_init().
This is often because add_pcie_port lacks a __init
annotation or the annotation of dw_pcie_host_init is wrong.
[bhelgaas: changelog]
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Bjorn Helgaas [Wed, 28 May 2014 22:21:25 +0000 (16:21 -0600)]
Merge branch 'pci/misc' into next
* pci/misc:
PCI: Fix return value from pci_user_{read,write}_config_*()
PCI: Turn pcibios_penalize_isa_irq() into a weak function
PCI: Test for std config alias when testing extended config space
Bjorn Helgaas [Wed, 28 May 2014 22:21:07 +0000 (16:21 -0600)]
Merge branches 'pci/hotplug', 'pci/pci_is_bridge' and 'pci/virtualization' into next
* pci/hotplug:
PCI: cpqphp: Fix possible null pointer dereference
NVMe: Implement PCIe reset notification callback
PCI: Notify driver before and after device reset
* pci/pci_is_bridge:
pcmcia: Use pci_is_bridge() to simplify code
PCI: pciehp: Use pci_is_bridge() to simplify code
PCI: acpiphp: Use pci_is_bridge() to simplify code
PCI: cpcihp: Use pci_is_bridge() to simplify code
PCI: shpchp: Use pci_is_bridge() to simplify code
PCI: rpaphp: Use pci_is_bridge() to simplify code
sparc/PCI: Use pci_is_bridge() to simplify code
powerpc/PCI: Use pci_is_bridge() to simplify code
ia64/PCI: Use pci_is_bridge() to simplify code
x86/PCI: Use pci_is_bridge() to simplify code
PCI: Use pci_is_bridge() to simplify code
PCI: Add new pci_is_bridge() interface
PCI: Rename pci_is_bridge() to pci_has_subordinate()
* pci/virtualization:
PCI: Introduce new device binding path using pci_dev.driver_override
Conflicts:
drivers/pci/pci-sysfs.c
Bjorn Helgaas [Wed, 28 May 2014 22:16:27 +0000 (16:16 -0600)]
Merge branches 'pci/host-exynos', 'pci/host-rcar' and 'pci/amd-numa' into next
* pci/host-exynos:
PCI: exynos: Remove unnecessary OOM messages
* pci/host-rcar:
PCI: rcar: Add gen2 device tree support
PCI: rcar: Add R-Car PCIe device tree bindings
PCI: rcar: Add MSI support for PCIe
PCI: rcar: Add Renesas R-Car PCIe driver
PCI: rcar: Use new OF interrupt mapping when possible
* pci/amd-numa:
x86/PCI: Clean up and mark early_root_info_init() as deprecated
x86/PCI: Work around AMD Fam15h BIOSes that fail to provide _PXM
x86/PCI: Warn if we have to "guess" host bridge node information
Alex Williamson [Tue, 20 May 2014 14:53:21 +0000 (08:53 -0600)]
PCI: Introduce new device binding path using pci_dev.driver_override
The driver_override field allows us to specify the driver for a device
rather than relying on the driver to provide a positive match of the
device. This shortcuts the existing process of looking up the vendor and
device ID, adding them to the driver new_id, binding the device, then
removing the ID, but it also provides a couple advantages.
First, the above existing process allows the driver to bind to any device
matching the new_id for the window where it's enabled. This is often not
desired, such as the case of trying to bind a single device to a meta
driver like pci-stub or vfio-pci. Using driver_override we can do this
deterministically using:
echo pci-stub > /sys/bus/pci/devices/0000:03:00.0/driver_override
echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind
echo 0000:03:00.0 > /sys/bus/pci/drivers_probe
Previously we could not invoke drivers_probe after adding a device to
new_id for a driver as we get non-deterministic behavior whether the driver
we intend or the standard driver will claim the device. Now it becomes a
deterministic process, only the driver matching driver_override will probe
the device.
To return the device to the standard driver, we simply clear the
driver_override and reprobe the device:
echo > /sys/bus/pci/devices/0000:03:00.0/driver_override
echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind
echo 0000:03:00.0 > /sys/bus/pci/drivers_probe
Another advantage to this approach is that we can specify a driver override
to force a specific binding or prevent any binding. For instance when an
IOMMU group is exposed to userspace through VFIO we require that all
devices within that group are owned by VFIO. However, devices can be
hot-added into an IOMMU group, in which case we want to prevent the device
from binding to any driver (override driver = "none") or perhaps have it
automatically bind to vfio-pci. With driver_override it's a simple matter
for this field to be set internally when the device is first discovered to
prevent driver matches.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Williamson [Thu, 22 May 2014 23:08:07 +0000 (17:08 -0600)]
PCI: Add bridge DMA alias quirk for ASMedia and Tundra bridges
The quirk is intended to be extremely generic, but we only apply it to
known offending devices.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=44881
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Alex Williamson [Wed, 28 May 2014 20:57:02 +0000 (14:57 -0600)]
PCI: Add support for PCIe-to-PCI bridge DMA alias quirks
Several PCIe-to-PCI bridges fail to provide a PCIe capability, causing us
to handle them as conventional PCI devices when they really use the
requester ID of the secondary bus. We need to differentiate these from
PCIe-to-PCI bridges that actually use the conventional PCI ID when a PCIe
capability is not present, such as those found on the root complex of may
Intel chipsets. Add a dev_flag bit to identify devices to be handled as
standard PCIe-to-PCI bridges.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Alex Williamson [Wed, 28 May 2014 20:54:00 +0000 (14:54 -0600)]
PCI: Add function 1 DMA alias quirk for Marvell devices
Several Marvell devices and a JMicron device have a similar DMA requester
ID problem to Ricoh, except they use function 1 as the PCIe requester ID.
Add a quirk for these to populate the DMA alias with the correct devfn.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679
Tested-by: George Spelvin <linux@horizon.com>
Tested-by: Andreas Schrägle <ajs124.ajs124@gmail.com>
Tested-by: Tobias N <qemu@suppser.de>
Tested-by: <daxcore@online.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Alex Williamson [Thu, 22 May 2014 23:07:49 +0000 (17:07 -0600)]
PCI: Add function 0 DMA alias quirk for Ricoh devices
The existing quirk for these devices (pci_get_dma_source()) doesn't really
solve the problem; re-implement it using the DMA alias iterator. We'll
come back later and remove the existing quirk and dma_source interface.
Note that device ID 0xe822 is typically function 0 and 0xe230 has been
tested to not need the quirk and are therefore removed versus the
equivalent dma_source quirk. If there exist in other configurations we can
re-add them.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=605888
Tested-by: Pat Erley <pat-lkml@erley.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Alex Williamson [Thu, 22 May 2014 23:07:43 +0000 (17:07 -0600)]
PCI: Add support for DMA alias quirks
Some devices are broken and use a requester ID other than their physical
devfn. Add a byte, using an existing gap in the pci_dev structure, to
store an alternate "alias" devfn. A bit in the dev_flags tells us when
this is valid. We then add the alias as one more step in the
pci_for_each_dma_alias() iterator.
Tested-by: George Spelvin <linux@horizon.com>
Tested-by: Pat Erley <pat-lkml@erley.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Alex Williamson [Thu, 22 May 2014 23:07:36 +0000 (17:07 -0600)]
PCI: Convert pci_dev_flags definitions to bit shifts
Convert the pci_dev_flags definitions from decimal constants to bit shifts.
We're only a few entries away from where using the decimal value becomes
cumbersome. No functional change.
Tested-by: George Spelvin <linux@horizon.com>
Tested-by: Pat Erley <pat-lkml@erley.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Alex Williamson [Thu, 22 May 2014 23:07:30 +0000 (17:07 -0600)]
PCI: Add DMA alias iterator
In a mixed PCI/PCI-X/PCIe topology, bridges can take ownership of
transactions, replacing the original requester ID with their own.
Sometimes we just want to know the resulting device or resulting alias;
other times we want each step in the chain. This iterator allows either
usage. When an endpoint is connected via an unbroken chain of PCIe
switches and root ports, it has no alias and its requester ID is visible to
the root bus. When PCI/X get in the way, we pick up aliases for bridges.
The reason why we potentially care about each step in the path is because
of PCI-X. PCI-X has the concept of a requester ID, but bridges may or may
not take ownership of various types of transactions. We therefore leave it
to the consumer of this function to prune out what they don't care about
rather than attempt to flatten the alias ourselves.
Tested-by: George Spelvin <linux@horizon.com>
Tested-by: Pat Erley <pat-lkml@erley.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Ben Dooks [Mon, 19 May 2014 21:10:20 +0000 (01:10 +0400)]
PCI: rcar: Add gen2 device tree support
Add device tree probing support to the 'pci-rcar-gen2' driver.
[Sergei: numerous fixes/cleanups/additions]
[bhelgaas: whitespace fix]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Rickard Strandqvist [Sun, 18 May 2014 16:02:57 +0000 (18:02 +0200)]
PCI: cpqphp: Fix possible null pointer dereference
There is otherwise a risk of a null pointer dereference.
Found by cppcheck, a static code analysis program.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Phil Edworthy [Mon, 12 May 2014 10:57:50 +0000 (11:57 +0100)]
PCI: rcar: Add R-Car PCIe device tree bindings
This patch adds the bindings for the R-Car PCIe driver. The driver resides
under drivers/pci/host/pcie-rcar.c
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Phil Edworthy [Mon, 12 May 2014 10:57:49 +0000 (11:57 +0100)]
PCI: rcar: Add MSI support for PCIe
Add MSI support to the R-Car PCIe driver.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Phil Edworthy [Mon, 12 May 2014 10:57:48 +0000 (11:57 +0100)]
PCI: rcar: Add Renesas R-Car PCIe driver
This PCIe Host driver currently does not support MSI, so cards fall back to
INTx interrupts.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Gavin Shan [Wed, 21 May 2014 05:23:30 +0000 (15:23 +1000)]
PCI: Fix return value from pci_user_{read,write}_config_*()
The PCI user-space config accessors pci_user_{read,write}_config_*() return
negative error numbers, which were introduced by commit
34e3207205ef
("PCI: handle positive error codes"). That patch converted all positive
error numbers from platform-specific PCI config accessors to -EINVAL, which
means the callers don't know anything about the specific cause of the
failure.
The patch fixes the issue by converting the positive PCIBIOS_* error values
to generic negative error numbers with pcibios_err_to_errno().
[bhelgaas: changelog]
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Thelen <gthelen@google.com>
Jingoo Han [Fri, 9 May 2014 05:31:25 +0000 (14:31 +0900)]
PCI: exynos: Remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they duplicate the
MM subsystem generic OOM message.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Hanjun Guo [Tue, 6 May 2014 03:29:52 +0000 (11:29 +0800)]
PCI: Turn pcibios_penalize_isa_irq() into a weak function
pcibios_penalize_isa_irq() is only implemented by x86 now, and legacy ISA
is not used by some architectures. Make pcibios_penalize_isa_irq() a
__weak function to simplify the code. This removes the need for new
platforms to add stub implementations of pcibios_penalize_isa_irq().
[bhelgaas: changelog, comments]
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Alex Williamson [Mon, 5 May 2014 20:20:51 +0000 (14:20 -0600)]
PCI: Test for std config alias when testing extended config space
When a PCI-to-PCIe bridge is stacked on a PCIe-to-PCI bridge, we can have
PCIe endpoints masked by a conventional PCI bus. This makes the extended
config space of the PCIe endpoint inaccessible. The PCIe-to-PCI bridge is
supposed to handle any type 1 configuration transactions where the extended
config offset bits are non-zero as an Unsupported Request rather than
forward it to the secondary interface. As noted here, there are a couple
known offenders to this rule. These bridges drop the extended offset bits,
resulting in the conventional config space being aliased many times across
the extended config space. For Intel NICs, this alias often seems to
expose a bogus SR-IOV cap.
Stacking bridges may seem like an uncommon scenario, but note that any
conventional PCI slot in a modern PC is already the secondary interface of
an onboard PCIe-to-PCI bridge. The user need only add a PCI-to-PCIe
adapter and PCIe device to encounter this problem.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Yijing Wang [Sun, 4 May 2014 04:23:47 +0000 (12:23 +0800)]
pcmcia: Use pci_is_bridge() to simplify code
Use pci_is_bridge() to simplify code. No functional change.
Requires:
326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires:
1c86438c9423 PCI: Add new pci_is_bridge() interface
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Yijing Wang [Sun, 4 May 2014 04:23:48 +0000 (12:23 +0800)]
PCI: pciehp: Use pci_is_bridge() to simplify code
Use pci_is_bridge() to simplify code. No functional change.
Requires:
326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires:
1c86438c9423 PCI: Add new pci_is_bridge() interface
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Yijing Wang [Sun, 4 May 2014 04:23:46 +0000 (12:23 +0800)]
PCI: acpiphp: Use pci_is_bridge() to simplify code
Use pci_is_bridge() to simplify code. No functional change.
Requires:
326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires:
1c86438c9423 PCI: Add new pci_is_bridge() interface
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Yijing Wang [Sun, 4 May 2014 04:23:45 +0000 (12:23 +0800)]
PCI: cpcihp: Use pci_is_bridge() to simplify code
Use pci_is_bridge() to simplify code. No functional change.
Requires:
326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires:
1c86438c9423 PCI: Add new pci_is_bridge() interface
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Yijing Wang [Sun, 4 May 2014 04:23:44 +0000 (12:23 +0800)]
PCI: shpchp: Use pci_is_bridge() to simplify code
Use pci_is_bridge() to simplify code. No functional change.
Requires:
326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires:
1c86438c9423 PCI: Add new pci_is_bridge() interface
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Yijing Wang [Sun, 4 May 2014 04:23:43 +0000 (12:23 +0800)]
PCI: rpaphp: Use pci_is_bridge() to simplify code
Use pci_is_bridge() to simplify code. No functional change.
Requires:
326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires:
1c86438c9423 PCI: Add new pci_is_bridge() interface
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Yijing Wang [Sun, 4 May 2014 04:23:42 +0000 (12:23 +0800)]
sparc/PCI: Use pci_is_bridge() to simplify code
Use pci_is_bridge() to simplify code. No functional change.
Requires:
326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires:
1c86438c9423 PCI: Add new pci_is_bridge() interface
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Yijing Wang [Sun, 4 May 2014 04:23:41 +0000 (12:23 +0800)]
powerpc/PCI: Use pci_is_bridge() to simplify code
Use pci_is_bridge() to simplify code. No functional change.
Requires:
326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires:
1c86438c9423 PCI: Add new pci_is_bridge() interface
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Yijing Wang [Sun, 4 May 2014 04:23:40 +0000 (12:23 +0800)]
ia64/PCI: Use pci_is_bridge() to simplify code
Use pci_is_bridge() to simplify code. No functional change.
Requires:
326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires:
1c86438c9423 PCI: Add new pci_is_bridge() interface
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Yijing Wang [Sun, 4 May 2014 04:23:39 +0000 (12:23 +0800)]
x86/PCI: Use pci_is_bridge() to simplify code
Use pci_is_bridge() to simplify code. No functional change.
Requires:
326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires:
1c86438c9423 PCI: Add new pci_is_bridge() interface
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Yijing Wang [Sun, 4 May 2014 04:23:38 +0000 (12:23 +0800)]
PCI: Use pci_is_bridge() to simplify code
Use pci_is_bridge() to simplify code. No functional change.
Requires:
326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate()
Requires:
1c86438c9423 PCI: Add new pci_is_bridge() interface
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Yijing Wang [Sun, 4 May 2014 04:23:37 +0000 (12:23 +0800)]
PCI: Add new pci_is_bridge() interface
Add a helper function to check a device's header type for PCI bridge or
CardBus bridge.
Requires:
326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate()
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Yijing Wang [Sun, 4 May 2014 04:23:36 +0000 (12:23 +0800)]
PCI: Rename pci_is_bridge() to pci_has_subordinate()
Previously, pci_is_bridge() returned true only when a subordinate bus
existed. Rename pci_is_bridge() to pci_has_subordinate() to better
indicate what we're checking.
No functional change.
[bhelgaas: changelog]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Keith Busch [Fri, 2 May 2014 16:40:43 +0000 (10:40 -0600)]
NVMe: Implement PCIe reset notification callback
Quiesce and shutdown the device prior to reset, then restart the device and
resume IO after.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Keith Busch [Fri, 2 May 2014 16:40:42 +0000 (10:40 -0600)]
PCI: Notify driver before and after device reset
Notify a PCI device driver when its device's access is about to be disabled
for an impending reset attempt, then after the attempt completes and device
access is restored. The notification is via the pci_error_handlers
interface.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Suravee Suthikulpanit [Thu, 8 May 2014 16:44:19 +0000 (11:44 -0500)]
x86/PCI: Clean up and mark early_root_info_init() as deprecated
early_root_info_init() is now deprecated in favor of info in ACPI. Add a
note to that effect. Also, clean up the code a bit.
There is no functional change.
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Mon, 26 May 2014 23:29:17 +0000 (17:29 -0600)]
Merge branches 'dma-api', 'pci/virtualization', 'pci/msi', 'pci/misc' and 'pci/resource' into next
* dma-api:
iommu/exynos: Remove unnecessary "&" from function pointers
DMA-API: Update dma_pool_create ()and dma_pool_alloc() descriptions
DMA-API: Fix duplicated word in DMA-API-HOWTO.txt
DMA-API: Capitalize "CPU" consistently
sh/PCI: Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory()
DMA-API: Change dma_declare_coherent_memory() CPU address to phys_addr_t
DMA-API: Clarify physical/bus address distinction
* pci/virtualization:
PCI: Mark RTL8110SC INTx masking as broken
* pci/msi:
PCI/MSI: Remove pci_enable_msi_block()
* pci/misc:
PCI: Remove pcibios_add_platform_entries()
s390/pci: use pdev->dev.groups for attribute creation
PCI: Move Open Firmware devspec attribute to PCI common code
* pci/resource:
PCI: Add resource allocation comments
PCI: Simplify __pci_assign_resource() coding style
PCI: Change pbus_size_mem() return values to be more conventional
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources
PCI: Support BAR sizes up to 8GB
resources: Clarify sanity check message
PCI: Don't add disabled subtractive decode bus resources
PCI: Don't print anything while decoding is disabled
PCI: Don't set BAR to zero if dma_addr_t is too small
PCI: Don't convert BAR address to resource if dma_addr_t is too small
PCI: Reject BAR above 4GB if dma_addr_t is too small
PCI: Fail safely if we can't handle BARs larger than 4GB
x86/gart: Tidy messages and add bridge device info
x86/gart: Replace printk() with pr_info()
x86/PCI: Move pcibios_assign_resources() annotation to definition
x86/PCI: Mark ATI SBx00 HPET BAR as IORESOURCE_PCI_FIXED
x86/PCI: Don't try to move IORESOURCE_PCI_FIXED resources
x86/PCI: Fix Broadcom CNB20LE unintended sign extension
Bjorn Helgaas [Tue, 20 May 2014 22:54:23 +0000 (16:54 -0600)]
iommu/exynos: Remove unnecessary "&" from function pointers
Remove unnecessary "&" from function pointers in exynos_iommu_ops.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Gioh Kim [Tue, 20 May 2014 23:09:35 +0000 (17:09 -0600)]
DMA-API: Update dma_pool_create ()and dma_pool_alloc() descriptions
Use "boundary" to be more descriptive than "alloc" in the dma_pool_create()
documentation.
Replace "SLAB_KERNEL" and "SLAB_ATOMIC" with the correct "GFP_KERNEL" and
"GFP_ATOMIC."
[bhelgaas: changelog]
Signed-off-by: Gioh Kim <gioh.kim@lge.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Emilio López [Tue, 20 May 2014 22:54:22 +0000 (16:54 -0600)]
DMA-API: Fix duplicated word in DMA-API-HOWTO.txt
"coherent" is written twice when it should be just once.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Tue, 20 May 2014 22:56:27 +0000 (16:56 -0600)]
DMA-API: Capitalize "CPU" consistently
Sometimes we used "cpu," other times "CPU." Use "CPU" consistently.
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Tue, 20 May 2014 00:32:18 +0000 (18:32 -0600)]
PCI: Add resource allocation comments
Add comments in the code to match the allocation strategy of
7c671426dfc3
("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources").
No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Tue, 20 May 2014 00:39:07 +0000 (18:39 -0600)]
PCI: Simplify __pci_assign_resource() coding style
If an allocation succeeds, we can return success immediately. Then we
don't have to test for success in the subsequent code.
No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Tue, 20 May 2014 00:28:37 +0000 (18:28 -0600)]
PCI: Change pbus_size_mem() return values to be more conventional
pbus_size_mem() previously returned 0 for failure and 1 for success.
Change it to return -ENOSPC for failure and 0 for success.
No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Yinghai Lu [Mon, 19 May 2014 23:01:55 +0000 (17:01 -0600)]
PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources
This patch changes the way we handle 64-bit prefetchable bridge windows to
make it more likely that we can assign space to all devices.
Previously we put all prefetchable resources in the prefetchable bridge
window. If any of those resources was 32-bit only, we restricted the
window to be below 4GB.
After this patch, we only put 64-bit prefetchable resources in a 64-bit
prefetchable window. We put all 32-bit prefetchable resources in the
non-prefetchable window, even if there are no 64-bit prefetchable
resources.
With the previous approach, if there was a 32-bit prefetchable resource
behind a bridge, we forced the bridge's prefetchable window below 4GB,
which meant that even if there was plenty of space above 4GB available, we
couldn't use it, and assignment of large 64-bit resources could fail, as
in the bugzilla below.
The new strategy is:
1) If the prefetchable window is 64 bits wide, we put only 64-bit
prefetchable resources in it. Any 32-bit prefetchable resources go in
the non-prefetchable window.
2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit
prefetchable resources in it.
3) If there is no prefetchable window, all MMIO resources go in the
non-prefetchable window.
This reduces performance for 32-bit prefetchable resources below a bridge
with a 64-bit prefetchable window. We previously assigned prefetchable
space, but now we'll assign non-prefetchable space. This is the case even
if there are no 64-bit prefetchable resources, or if they would all fit
below 4GB. In those cases, the old strategy would work and would have
better performance.
[bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151
Tested-by: Guo Chao <yan@linux.vnet.ibm.com>
Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Alan [Mon, 19 May 2014 13:03:14 +0000 (14:03 +0100)]
PCI: Support BAR sizes up to 8GB
This is needed for some of the Xeon Phi type systems.
[bhelgaas: added Nikhil, use ARRAY_SIZE() to connect with decl, folded in
Kevin's "order < 0" fix to ARRAY_SIZE() usage]
Signed-off-by: Nikhil P Rao <nikhil.rao@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Mon, 14 Apr 2014 21:38:11 +0000 (15:38 -0600)]
resources: Clarify sanity check message
The resource map sanity check message is a bit confusing. Change it to be
more readable:
-resource map sanity check conflict: 0xfed10000 0xfed15fff 0xfed10000 0xfed13fff pnp 00:01
+resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Mon, 14 Apr 2014 22:10:54 +0000 (16:10 -0600)]
PCI: Don't add disabled subtractive decode bus resources
For a subtractive decode bridge, we previously added and printed all
resources of the primary bus, even if they were not valid. In the example
below, the bridge 00:1c.3 has no windows enabled, so there are no valid
resources on bus 02. But since 02:00.0 is subtractive decode bridge, we
add and print all those invalid resources, which don't really make sense:
pci 0000:00:1c.3: PCI bridge to [bus 02-03]
pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
Add and print the subtractively-decoded resources only if they are valid.
There's an example in the dmesg log attached to the bugzilla below (but
this patch doesn't fix the bug reported there).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=73141
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Mon, 14 Apr 2014 21:26:50 +0000 (15:26 -0600)]
PCI: Don't print anything while decoding is disabled
If the console is a PCI device, and we try to print to it while its
decoding is disabled, the system will hang. This particular printk hasn't
caused a problem yet, but it could, so this fixes it.
See also
0ff9514b579b ("PCI: Don't print anything while decoding is
disabled").
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Wed, 30 Apr 2014 00:37:47 +0000 (18:37 -0600)]
PCI: Don't set BAR to zero if dma_addr_t is too small
If a BAR is above 4GB and our dma_addr_t is too small, don't clear the BAR
to zero: that doesn't disable the BAR, and it makes it more likely that the
BAR will conflict with things if we turn on the memory enable bit (as we
will at "out:" if the device was already enabled at the handoff).
We should also print the BAR info and its original size so we can follow
the process when we try to assign space to it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Wed, 30 Apr 2014 00:42:49 +0000 (18:42 -0600)]
PCI: Don't convert BAR address to resource if dma_addr_t is too small
If dma_addr_t is too small to represent the BAR value,
pcibios_bus_to_resource() will fail, so just remember the BAR size directly
in the resource. The resource is already marked UNSET, so we know the
address isn't valid anyway.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Wed, 30 Apr 2014 00:33:09 +0000 (18:33 -0600)]
PCI: Reject BAR above 4GB if dma_addr_t is too small
We can only handle BARs above 4GB if dma_addr_t (not resource_size_t) is 64
bits wide. If we have a 64-bit resource_size_t and a 32-bit dma_addr_t,
we can't deal with BARs above 4GB.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Mon, 14 Apr 2014 21:25:54 +0000 (15:25 -0600)]
PCI: Fail safely if we can't handle BARs larger than 4GB
We can only handle BARs larger than 4GB if both dma_addr_t and
resource_size_t are 64 bits wide. If dma_addr_t is 32 bits, we can't
represent all the bus addresses, and if resource_size_t is 32 bits, we
can't represent all the CPU addresses.
Previously we cleared res->flags (at "fail:") for resources that were too
large. That means we think the BAR doesn't exist at all, which in turn
means that we could enable the device even though we can't keep track of
where the BAR is and we can't make sure it doesn't overlap something else.
This preserves the type flags (MEM/IO) so we can keep from enabling the
device.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Mon, 14 Apr 2014 21:29:19 +0000 (15:29 -0600)]
x86/gart: Tidy messages and add bridge device info
Print the AGP bridge info the same way as the rest of the kernel, e.g.,
"0000:00:04.0" instead of "00:04:00".
Also print the AGP aperture address range the same way we print resources,
and label it explicitly as a bus address range.
No functional change except the message changes.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Mon, 28 Apr 2014 21:16:33 +0000 (15:16 -0600)]
x86/gart: Replace printk() with pr_info()
Replace printk() with pr_info(), pr_err(), etc. Define pr_fmt() to prefix
output with "AGP: ".
No functional change except the addition of "AGP: " prefix in dmesg output.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Mon, 14 Apr 2014 22:13:48 +0000 (16:13 -0600)]
x86/PCI: Move pcibios_assign_resources() annotation to definition
Move the pcibios_assign_resources() fs_initcall annotation next to the
function definition. No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Sebastian Ott [Thu, 17 Apr 2014 17:48:07 +0000 (19:48 +0200)]
PCI: Remove pcibios_add_platform_entries()
Remove pcibios_add_platform_entries(). Architecture-specific attributes
can be achieved by setting pdev->dev.groups.
Link: https://lkml.kernel.org/r/alpine.LFD.2.11.1404141101500.1529@denkbrett
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Ott [Wed, 30 Apr 2014 20:50:09 +0000 (14:50 -0600)]
s390/pci: use pdev->dev.groups for attribute creation
Let the driver core handle attribute creation by putting all s390
specific pci attributes in an attribute group which is referenced
by pdev->dev.groups in pcibios_add_device.
Link: https://lkml.kernel.org/r/alpine.LFD.2.11.1404141101500.1529@denkbrett
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Suravee Suthikulpanit [Thu, 8 May 2014 16:44:18 +0000 (11:44 -0500)]
x86/PCI: Work around AMD Fam15h BIOSes that fail to provide _PXM
The BIOS is supposed to provide ACPI _PXM methods for PCI host bridges if
it cares about platform topology. But some BIOSes do not, so add Fam15h
to the list of CPUs for which we fall back to reading node numbers from the
hardware.
Note that pci_acpi_scan_root() warns about the BIOS bug if we use this
information because (1) the hardware node numbers are not necessarily
compatible with other logical node numbers from ACPI, and (2) the lack of
_PXM forces OS updates that would not otherwise be required.
[bhelgaas: changelog, comments]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=72051
Tested-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Robert Richter <rric@kernel.org>
Cc: Daniel J Blueman <daniel@numascale.com>
Cc: Andreas Herrmann <herrmann.der.user@googlemail.com>
Myron Stowe [Thu, 8 May 2014 16:44:20 +0000 (11:44 -0500)]
x86/PCI: Warn if we have to "guess" host bridge node information
The vast majority of platforms are not supplying ACPI _PXM (proximity)
information corresponding to host bridge (PNP0A03/PNP0A08) devices
resulting in sysfs "numa_node" values of -1 (NUMA_NO_NODE):
# for i in /sys/devices/pci0000\:00/*/numa_node; do cat $i; done | uniq
-1
# find /sys/ -name "numa_node" | while read fname; do cat $fname; \
done | uniq
-1
AMD based platforms provide a fall-back for this situation via amd_bus.c.
These platforms snoop out the information by directly reading specific
registers from the Northbridge and caching them via alloc_pci_root_info().
Later during boot processing when host bridges are discovered -
pci_acpi_scan_root() - the kernel looks for their corresponding ACPI _PXM
method - drivers/acpi/numa.c::acpi_get_node(). If the BIOS supplied a _PXM
method then that node (proximity) value is associated. If the BIOS did not
supply a _PXM method *and* the platform is AMD-based, the fall-back cached
values obtained directly from the Northbridge are used; otherwise,
"NUMA_NO_NODE" is associated.
There are a number of issues with this fall-back mechanism the most notable
being that amd_bus.c extracts a 3-bit number from a CPU register and uses
it as the node number. The node numbers used by Linux are logical and
there's no reason they need to be identical to settings in the CPU
registers. So if we have some node information obtained in the normal way
(from _PXM, SLIT, SRAT, etc.) and some from amd_bus.c, there's no reason to
believe they will be compatible.
This patch warns when this situation occurs:
pci_root PNP0A08:00: [Firmware Bug]: no _PXM; falling back to node 0 from hardware (may be inconsistent with ACPI node numbers)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=72051
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Tue, 20 May 2014 22:54:23 +0000 (16:54 -0600)]
sh/PCI: Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory()
dma_declare_coherent_memory() needs both the CPU physical address and the
bus address of the device memory. They are the same on this platform, but
in general we should use pcibios_resource_to_bus() to account for any
address translation done by the PCI host bridge.
This makes no difference on Dreamcast, but is safer if the usage is copied
to future drivers.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
CC: Magnus Damm <damm@opensource.se>
CC: linux-sh@vger.kernel.org
Bjorn Helgaas [Tue, 20 May 2014 22:54:22 +0000 (16:54 -0600)]
DMA-API: Change dma_declare_coherent_memory() CPU address to phys_addr_t
dma_declare_coherent_memory() takes two addresses for a region of memory: a
"bus_addr" and a "device_addr". I think the intent is that "bus_addr" is
the physical address a *CPU* would use to access the region, and
"device_addr" is the bus address the *device* would use to address the
region.
Rename "bus_addr" to "phys_addr" and change its type to phys_addr_t.
Most callers already supply a phys_addr_t for this argument. The others
supply a 32-bit integer (a constant, unsigned int, or __u32) and need no
change.
Use "unsigned long", not phys_addr_t, to hold PFNs.
No functional change (this could theoretically fix a truncation in a config
with 32-bit dma_addr_t and 64-bit phys_addr_t, but I don't think there are
any such cases involving this code).
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: James Bottomley <jbottomley@Parallels.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Bjorn Helgaas [Wed, 30 Apr 2014 17:20:53 +0000 (11:20 -0600)]
DMA-API: Clarify physical/bus address distinction
The DMA-API documentation sometimes refers to "physical addresses" when it
really means "bus addresses." Sometimes these are identical, but they may
be different if the bridge leading to the bus performs address translation.
Update the documentation to use "bus address" when appropriate.
Also, consistently capitalize "DMA", use parens with function names, use
dev_printk() in examples, and reword a few sections for clarity.
No functional change; documentation changes only.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Bottomley <jbottomley@Parallels.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Alex Williamson [Thu, 1 May 2014 20:36:31 +0000 (14:36 -0600)]
PCI: Mark RTL8110SC INTx masking as broken
INTx masking does not work on this device. To see this, configure the
network device UP on an active network, note that the interrupt count
continues to increment for the device in /proc/interrupts. Use setpci to
set the PCI_COMMAND_INTX_DISABLE bit in the PCI_COMMAND register. As
expected, the interrupt count ceases to increment. However, reading the
PCI_STATUS_INTERRUPT bit of the PCI_STATUS register does not indicate that
interrupts are pending and clearing PCI_COMMAND_INTX_DISABLE in the
PCI_COMMAND register does not allow the device to continue operation.
This does not affect operation of the host r8169 driver, but it does
prevent the device from being functional when assigned to a VM, such as
with QEMU and VFIO. The guest driver successfully probes the device, but
there is no traffic. Mark INTx masking as broken, allowing the more
restrictive APIC masking to be used instead.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Alexander Gordeev [Mon, 14 Apr 2014 13:28:35 +0000 (15:28 +0200)]
PCI/MSI: Remove pci_enable_msi_block()
There are no users of pci_enable_msi_block() function left. Obsolete it in
favor of pci_enable_msi_range() and pci_enable_msi_exact() functions.
Previously, we called arch_setup_msi_irqs() once, requesting the same
vector count we passed to arch_msi_check_device(). Now we may call it
several times: if it returns failure, we may retry and request fewer
vectors.
We don't keep track of the vector count we initially passed to
arch_msi_check_device(). We only keep track of the number of vectors
successfully set up by arch_setup_msi_irqs(), and this is what we use to
clean things up when disabling MSI. Therefore, we assume that
arch_msi_check_device() does nothing that will have to be cleaned up later.
[bhelgaas: changelog]
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Sebastian Ott [Thu, 17 Apr 2014 17:46:15 +0000 (19:46 +0200)]
PCI: Move Open Firmware devspec attribute to PCI common code
Move the devspec OF attribute to PCI common code's set of device attributes
since it's not architecture dependent. As a side effect microblaze and
powerpc no longer need to use pcibios_add_platform_entries().
[bhelgaas: fold in #include for compile error]
Link: https://lkml.kernel.org/r/alpine.LFD.2.11.1404141101500.1529@denkbrett
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Bjorn Helgaas [Tue, 29 Apr 2014 23:43:58 +0000 (17:43 -0600)]
Merge branches 'pci/hotplug', 'pci/msi', 'pci/virtualization' and 'pci/misc' into next
* pci/hotplug:
PCI: rphahp: Fix endianess issues
PCI: Allow hotplug service drivers to operate in polling mode
PCI: pciehp: Acknowledge spurious "cmd completed" event
PCI: pciehp: Use PCI_EXP_SLTCAP_PSN define
PCI: hotplug: Remove unnecessary "dev->bus" test
* pci/msi:
GenWQE: Use pci_enable_msi_exact() instead of pci_enable_msi_block()
PCI/MSI: Simplify populate_msi_sysfs()
PCI/portdrv: Use pci_enable_msix_exact() instead of pci_enable_msix()
* pci/virtualization:
PCI: Add Patsburg (X79) to Intel PCH root port ACS quirk
* pci/misc:
PCI: Fix use of uninitialized MPS value
PCI: Remove dead code
MAINTAINERS: Add arch/x86/kernel/quirks.c to PCI file patterns
PCI: Remove unnecessary __ref annotations
PCI: Fail new_id for vendor/device values already built into driver
PCI: Add new ID for Intel GPU "spurious interrupt" quirk
PCI: Update my email address
PCI: Fix incorrect vgaarb conditional in WARN_ON()
PCI: Use designated initialization in PCI_VDEVICE
PCI: Remove old serial device IDs
PCI: Remove unnecessary includes of <linux/init.h>
powerpc/PCI: Fix NULL dereference in sys_pciconfig_iobase() list traversal
Bjorn Helgaas [Tue, 29 Apr 2014 18:51:55 +0000 (12:51 -0600)]
PCI: Fix use of uninitialized MPS value
If "pcie_bus_config == PCIE_BUS_PERFORMANCE", we don't initialize "smpss",
so we pass a pointer to garbage into pcie_bus_configure_set(), where we
compute "mps" based on the garbage. We then pass the garbage "mps" to
pcie_write_mps(), which ignores it in the PCIE_BUS_PERFORMANCE case.
Coverity isn't smart enough to deduce that we ignore the garbage (it's a
lot to expect from a human, too), so initialize "smpss" to a safe value in
all cases.
Found by Coverity (CID 146454).
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Sat, 5 Apr 2014 21:08:22 +0000 (15:08 -0600)]
PCI: Remove dead code
"pdev" can never be NULL here, so remove the test.
Found by Coverity (CID 744313).
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Sat, 5 Apr 2014 21:07:00 +0000 (15:07 -0600)]
MAINTAINERS: Add arch/x86/kernel/quirks.c to PCI file patterns
I'm not asserting any claim over arch/x86/kernel/quirks.c, and I don't plan
to merge changes to it, but some of the quirks there are PCI-related, and
I'd like to see changes to them.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Mon, 14 Apr 2014 22:11:40 +0000 (16:11 -0600)]
PCI: Remove unnecessary __ref annotations
Some PCI functions used to be marked __devinit. When CONFIG_HOTPLUG was
not set, these functions were discarded after boot. A few callers of these
__devinit functions were marked __ref to indicate that they could safely
call the __devinit functions even though the callers were not __devinit.
But CONFIG_HOTPLUG and __devinit are now gone, and the need for the __ref
annotations is also gone, so remove them. Relevant historical commits:
54b956b90360 Remove __dev* markings from init.h
a8e4b9c101ae PCI: add generic pci_hp_add_bridge()
0ab2b57f8db8 PCI: fix section mismatch warning in pci_scan_child_bus
451124a7cc6c PCI: fix 4x section mismatch warnings
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bandan Das [Wed, 2 Apr 2014 01:32:59 +0000 (21:32 -0400)]
PCI: Fail new_id for vendor/device values already built into driver
While using the sysfs new_id interface, the user can unintentionally feed
incorrect values if the driver static table has a matching entry. This is
possible since only the device and vendor fields are mandatory and the rest
are optional. As a result, store_new_id() will fill in default values that
are then passed on to the driver and can have unintended consequences.
As an example, consider the ixgbe driver and the
82599EB network card:
echo "8086 10fb" > /sys/bus/pci/drivers/ixgbe/new_id
This will pass a pci_device_id with driver_data = 0 to ixgbe_probe(), which
uses that zero to index a table of card operations. The zeroth entry of
the table does *not* correspond to the 82599 operations.
This change returns an error if the user attempts to add a dynid for a
vendor/device combination for which a static entry already exists.
However, if the user intentionally wants a different set of values, she
must provide all the 7 fields and that will be accepted.
[bhelgaas: drop KVM text since the problem isn't KVM-specific]
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Thomas Jarosch [Mon, 7 Apr 2014 13:10:32 +0000 (15:10 +0200)]
PCI: Add new ID for Intel GPU "spurious interrupt" quirk
After a CPU upgrade while keeping the same mainboard, we faced "spurious
interrupt" problems again.
It turned out that the new CPU also featured a new GPU with a different PCI
ID.
Add this PCI ID to the quirk table. Probably all other Intel GPU PCI IDs
are affected, too, but I don't want to add them without a test system.
See
f67fd55fa96f ("PCI: Add quirk for still enabled interrupts on Intel
Sandy Bridge GPUs") for some history.
[bhelgaas: add
f67fd55fa96f reference, stable tag]
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.4+
Ben Hutchings [Tue, 22 Apr 2014 16:27:57 +0000 (17:27 +0100)]
PCI: Update my email address
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Alexander Gordeev [Mon, 14 Apr 2014 07:14:06 +0000 (09:14 +0200)]
GenWQE: Use pci_enable_msi_exact() instead of pci_enable_msi_block()
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers using these two
interfaces need to be updated to use the new pci_enable_msi_range() or
pci_enable_msi_exact() and pci_enable_msix_range() or
pci_enable_msix_exact() interfaces.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laurent Dufour [Thu, 10 Apr 2014 13:02:13 +0000 (15:02 +0200)]
PCI: rphahp: Fix endianess issues
Numerical values stored in the device tree are encoded in Big Endian and
should be byte swapped when running in Little Endian.
The RPA hotplug module should convert those values as well.
Note that in rpaphp_get_drc_props(), the comparison between indexes[i+1]
and *index is done using the BE values (whatever is the current endianess).
This doesn't matter since we are checking for equality here. This way only
the returned value is byte swapped.
RPA also made RTAS calls which implies BE values to be used. According to
the patch done in RTAS (http://patchwork.ozlabs.org/patch/336865), no
additional conversion is required in RPA.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Sat, 5 Apr 2014 21:14:22 +0000 (15:14 -0600)]
PCI: Fix incorrect vgaarb conditional in WARN_ON()
3448a19da479 "vgaarb: use bridges to control VGA routing where possible"
added the "flags & PCI_VGA_STATE_CHANGE_DECODES" condition to an existing
WARN_ON(), but used bitwise AND (&) instead of logical AND (&&), so the
condition is never true. Replace with logical AND.
Found by Coverity (CID 142811).
Fixes:
3448a19da479 "vgaarb: use bridges to control VGA routing where possible"
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: David Airlie <airlied@redhat.com>
Bjorn Helgaas [Mon, 14 Apr 2014 21:35:21 +0000 (15:35 -0600)]
x86/PCI: Mark ATI SBx00 HPET BAR as IORESOURCE_PCI_FIXED
Bodo reported that on the Asrock M3A UCC, v3.12.6 hangs during boot unless
he uses "pci=nocrs". This regression was caused by
7bc5e3f2be32 ("x86/PCI:
use host bridge _CRS info by default on 2008 and newer machines"), which
appeared in v2.6.34.
The reason is that the HPET address appears in a PCI device BAR, and this
address is not contained in any of the host bridge windows. Linux moves
the PCI BAR into a window, but the original address was published via the
HPET table and an ACPI device, so changing the BAR is a bad idea. Here's
the dmesg info:
ACPI: HPET id: 0x43538301 base: 0xfed00000
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.0: reg 14: [mem 0xfed00000-0xfed003ff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: [mem 0xfed00000-0xfed003ff]
When we notice the BAR is not in a host bridge window, we try to move it,
but that causes a hang shortly thereafter:
pci 0000:00:14.0: no compatible bridge window for [mem 0xfed00000-0xfed003ff]
pci 0000:00:14.0: BAR 1: assigned [mem 0xf0000000-0xf00003ff]
This patch marks the BAR as IORESOURCE_PCI_FIXED to prevent Linux from
moving it. This depends on a previous patch ("x86/PCI: Don't try to move
IORESOURCE_PCI_FIXED resources") to check for this flag when
pci_claim_resource() fails.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=68591
Reported-and-tested-by: Bodo Eggert <7eggert@gmx.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Mon, 14 Apr 2014 21:30:09 +0000 (15:30 -0600)]
x86/PCI: Don't try to move IORESOURCE_PCI_FIXED resources
Don't attempt to move resource marked IORESOURCE_PCI_FIXED, even if
pci_claim_resource() fails. In some cases, these are legacy resources that
cannot be moved.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Bjorn Helgaas [Fri, 25 Apr 2014 17:01:08 +0000 (11:01 -0600)]
x86/PCI: Fix Broadcom CNB20LE unintended sign extension
In the expression "word1 << 16", word1 starts as u16, but is promoted to
a signed int, then sign-extended to resource_size_t, which is probably
not what was intended. Cast to resource_size_t to avoid the sign
extension.
Found by Coverity (CID 138749, 138750).
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Mark Rustad [Mon, 31 Mar 2014 21:58:39 +0000 (14:58 -0700)]
PCI: Use designated initialization in PCI_VDEVICE
By using designated initialization in PCI_VDEVICE, like other similar
macros, many "missing initializer" warnings that appear when compiling with
W=2 can be silenced.
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Rajat Jain [Mon, 31 Mar 2014 23:51:23 +0000 (16:51 -0700)]
PCI: Allow hotplug service drivers to operate in polling mode
Today the PCIe port bus driver disables the Hot-plug service if the port
device does not have the capability to generate interrupts. However, a
user must be able to use the "pciehp_poll_mode" parameter to use the pciehp
in polling method in such a case. Today it is not possible.
This patch allows a hotplug service driver to decide whether or not it
would like to continue in the absence of interrupts.
Signed-off-by: Rajat Jain <rajatxjain@gmail.com>
Signed-off-by: Rajat Jain <rajatjain@juniper.net>
Signed-off-by: Guenter Roeck <groeck@juniper.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Rajat Jain [Fri, 21 Feb 2014 01:42:31 +0000 (17:42 -0800)]
PCI: pciehp: Acknowledge spurious "cmd completed" event
In case of a spurious "cmd completed", pcie_write_cmd() does not clear it,
but yet expects more "cmd completed" events to be generated. This does not
happen because the previous (spurious) event has not been acknowledged.
Fix that.
Signed-off-by: Rajat Jain <rajatxjain@gmail.com>
Signed-off-by: Rajat Jain <rajatjain@juniper.net>
Signed-off-by: Guenter Roeck <groeck@juniper.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Jean Delvare [Mon, 31 Mar 2014 13:19:29 +0000 (15:19 +0200)]
PCI: Remove old serial device IDs
These IDs are no longer referenced since kernel 3.1 so I suppose we can
remove them from pci_ids.h.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lucas Stach [Mon, 7 Apr 2014 09:30:20 +0000 (11:30 +0200)]
PCI: rcar: Use new OF interrupt mapping when possible
Use new OF interrupt mapping (of_irq_parse_and_map_pci()) when possible.
This is the recommended method of doing the IRQ mapping. For old
devicetrees we fall back to the previous practice.
This allows interrupts to be remapped across bridges.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>