OSDN Git Service
cgf [Wed, 8 Jul 2009 23:23:02 +0000 (23:23 +0000)]
* pathnames.sgml: Fix typo.
dj [Wed, 8 Jul 2009 20:54:19 +0000 (20:54 +0000)]
* m32c/sbrk.c (sbrk): Change to take ptrdiff_t, not int.
uweigand [Wed, 8 Jul 2009 12:02:57 +0000 (12:02 +0000)]
* tui/tui-stack.c (tui_make_status_line): Display PC as ?? if unknown.
devans [Wed, 8 Jul 2009 06:16:46 +0000 (06:16 +0000)]
* Makefile.in (traps.o): Add dependency on targ-vals.h to fix
parallel makes.
devans [Wed, 8 Jul 2009 05:38:01 +0000 (05:38 +0000)]
* Makefile.in (stamp-arch): Pass archfile to cgen-arch.
(stamp-cpu): Pass archfile to cgen-cpu-decode.
dj [Wed, 8 Jul 2009 05:37:28 +0000 (05:37 +0000)]
* cpu/mep-ivc2.cpu (cpmovtocsar0_C3, cpmovtocsar1_C3,
cpmovtocc_C3, cpmovtocsar0_P0S_P1, cpmovtocsar1_P0S_P1,
cpmovtocc_P0S_P1): Mark volatile. Note which registers are
written to.
amodra [Wed, 8 Jul 2009 03:09:12 +0000 (03:09 +0000)]
* ld-selective/selective.exp: Remove check that $CC contains the
string "gcc". Do -dumpversion for $CXX.
amodra [Wed, 8 Jul 2009 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Wed, 8 Jul 2009 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
muller [Tue, 7 Jul 2009 22:21:09 +0000 (22:21 +0000)]
* breakpoint.c (set_raw_breakpoint): Remove static modifier.
davek [Tue, 7 Jul 2009 21:41:43 +0000 (21:41 +0000)]
* winbase.h (ilockexch): Avoid making 'ret' volatile.
(ilockcmpexch): Likewise.
tromey [Tue, 7 Jul 2009 21:33:48 +0000 (21:33 +0000)]
gdb
* c-lang.c (convert_octal): Only allow 3 octal digits.
(print_wchar): Prefer 3-digit octal form. Fall back to hex if
needed.
* c-exp.y (c_parse_escape): Only allow 3 octal digits.
gdb/testsuite
* gdb.base/call-rt-st.exp: Update for change to escape output.
* gdb.base/callfuncs.exp: Likewise.
* gdb.base/charset.exp: Likewise.
* gdb.base/constvars.exp: Likewise.
* gdb.base/long_long.exp: Likewise.
* gdb.base/pointers.exp: Likewise.
* gdb.base/printcmds.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
* gdb.base/store.exp: Likewise.
* gdb.cp/ref-types.exp: Likewise.
* gdb.mi/mi-var-child.exp: Likewise.
* gdb.mi/mi-var-display.exp: Likewise.
* gdb.mi/mi2-var-display.exp: Likewise.
* gdb.base/charset.exp: Test octal escape sequence length.
Update for change to escape output.
dj [Tue, 7 Jul 2009 21:12:51 +0000 (21:12 +0000)]
* config/tc-mep.c (md_begin): Don't reset the coprocessor options
when enabling other options without a specific configuration.
ppluzhnikov [Tue, 7 Jul 2009 21:02:59 +0000 (21:02 +0000)]
2009-07-07 Paul Pluzhnikov <ppluzhnikov@google.com>
* python/python-value.c (valpy_getitem): Remove incorrect assert.
davek [Tue, 7 Jul 2009 20:25:34 +0000 (20:25 +0000)]
* ChangeLog: Assorted minor whitespace fixes in old entries.
davek [Tue, 7 Jul 2009 20:12:43 +0000 (20:12 +0000)]
winsup/ChangeLog:
* Makefile.common (COMPILE_CXX): Add support for per-file overrides
to exclude $(nostdinc) and $(nostdincxx) from compiler flags.
(COMPILE_CC): Likewise for $(nostdinc).
winsup/cygwin/ChangeLog:
* Makefile.in (DLL_OFILES): Add libstdcxx_wrapper.o
(libstdcxx_wrapper_CFLAGS): Add flags for new module.
(_cygwin_crt0_common_STDINCFLAGS): Define per-file override.
(libstdcxx_wrapper_STDINCFLAGS, cxx_STDINCFLAGS): Likewise.
* cxx.cc: Include "cygwin-cxx.h".
(operator new): Tweak prototype for full standards compliance.
(operator new[]): Likewise.
(operator new (nothrow)): New fallback function.
(operator new[] (nothrow), operator delete (nothrow),
operator delete[] (nothrow)): Likewise.
(default_cygwin_cxx_malloc): New struct of pointers to the above,
for final last-resort fallback default.
* cygwin-cxx.h: New file.
(struct per_process_cxx_malloc): Define.
(default_cygwin_cxx_malloc): Declare extern.
* cygwin.din (__wrap__ZdaPv): Export new wrapper.
(__wrap__ZdaPvRKSt9nothrow_t, __wrap__ZdlPv,
__wrap__ZdlPvRKSt9nothrow_t, __wrap__Znaj,
__wrap__ZnajRKSt9nothrow_t, __wrap__Znwj,
__wrap__ZnwjRKSt9nothrow_t): Likewise.
* globals.cc (__cygwin_user_data): Init newly-repurposed 'forkee'
field (now 'cxx_malloc') to point to default_cygwin_cxx_malloc.
* libstdcxx_wrapper.cc: New file.
(__wrap__ZdaPv, __wrap__ZdaPvRKSt9nothrow_t, __wrap__ZdlPv,
__wrap__ZdlPvRKSt9nothrow_t, __wrap__Znaj,
__wrap__ZnajRKSt9nothrow_t, __wrap__Znwj,
__wrap__ZnwjRKSt9nothrow_t): Define wrapper functions for libstdc++
malloc operators and their overrides.
* winsup.h (default_cygwin_cxx_malloc): Declare extern.
* include/cygwin/version.h (CYGWIN_VERSION_API_MINOR): Bump.
* include/sys/cygwin.h (struct per_process_cxx_malloc): Forward
declare here.
(struct per_process::forkee): Rename and repurpose from this ...
(struct per_process::cxx_malloc): ... to this.
* lib/_cygwin_crt0_common.cc: Include cygwin-cxx.h.
(WEAK): Define shorthand helper macro.
(__cygwin_cxx_malloc): Define and populate with weak references
to whatever libstdc++ malloc operators will be visible at final
link time for Cygwin apps and dlls.
(_cygwin_crt0_common): Always look up cygwin DLL's internal
per_process data, and don't test for (impossible) failure. Inherit
any members of __cygwin_cxx_malloc that we don't have overrides
for from the DLL's default and store the resulting overall set of
overrides back into the DLL's global per_process data.
ppluzhnikov [Tue, 7 Jul 2009 19:36:09 +0000 (19:36 +0000)]
2009-07-07 Paul Pluzhnikov <ppluzhnikov@google.com>
* python/python-value.c (valpy_getitem): Don't return from TRY_CATCH.
devans [Tue, 7 Jul 2009 18:52:32 +0000 (18:52 +0000)]
(-parse-insn-format-ifield-spec): Tweak error message.
devans [Tue, 7 Jul 2009 18:44:09 +0000 (18:44 +0000)]
* cpu/play.cpu (add): Use (ifield enum) for one format element.
* cpu/play.opc: New file.
Allow arbitrary enums in instruction formats, e.g. (f-op1 OP1_4).
* insn.scm (-parse-insn-format-ifield-spec): Recognize (ifield enum).
* doc/rtl.texi (Instructions): Update.
devans [Tue, 7 Jul 2009 18:27:08 +0000 (18:27 +0000)]
* cgen-opc.scm (-opc-file-path,opc-file-path): Move to opcodes.scm
(opc-arguments, -OPC): Call set-opc-file-path!.
* opcodes.scm (-opc-file-path,opc-file-path): Moved here.
(set-opc-file-path!): New function.
* dev.scm: Mention set-opc-file-path!. Mention doc options.
devans [Tue, 7 Jul 2009 18:19:07 +0000 (18:19 +0000)]
* opc-ibld.scm (gen-insn-builder): Convert symbols to strings
before passing to gen-c-args.
swagiaal [Tue, 7 Jul 2009 17:25:10 +0000 (17:25 +0000)]
2009-07-07 Sami Wagiaalla <swagiaal@redhat.com>
* cp-support.h (struct using_direct): Rename members inner and
outer to import_src, and import_dest respectively.
* cp-namespace.c (cp_add_using_directive): Update.
(cp_add_using): Update.
(cp_copy_usings): Update.
(cp_lookup_symbol_namespace): Update.
(cp_scan_for_anonymous_namespaces): Update.
* cp-support.c (make_symbol_overload_list_using): Update.
* cp-support.h (cp_add_using_directive, cp_add_using): Rename
arguments from inner and outer to src and dest respectively.
* cp-namespace.c (cp_add_using_directive): Ditto.
(cp_add_using): Ditto.
nickc [Tue, 7 Jul 2009 16:15:26 +0000 (16:15 +0000)]
gas/
* config/tc-arm.c (insns): Fix encoding for torvsc.
gas/testsuite/
* gas/arm/iwmmxt2.d: Fix insn pattern for torvsc,
add patterns for waddsubhx.
* gas/arm/iwmmxt2.s: Add tests for waddsubhx.
opcodes/
* arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
nickc [Tue, 7 Jul 2009 14:46:14 +0000 (14:46 +0000)]
PR 10288
* arm-dis.c (arm_opcodes): Be more strict about decoding scaled
addressing modes.
hjl [Tue, 7 Jul 2009 13:57:46 +0000 (13:57 +0000)]
2009-07-07 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/fma4.d: Append "#pass".
* gas/i386/x86-64-fma4.d: Likewise.
muller [Tue, 7 Jul 2009 12:38:56 +0000 (12:38 +0000)]
* generic/gdbtk-bp.c: Include "arch-utils.h".
(set_raw_breakpoint): Update external definition.
(gdb_set_bp): Adapt to set_raw_breakpoint change.
(gdb_set_bp_addr): Likewise.
* generic/gdbtk-cmds.c: Include "arch-utils.h.
(gdbtk_load_asm): Adapt to paddress and gdb_print_insn changes.
(hex2bin): Replace current_gdbarch by get_current_arch call.
(gdb_update_mem): Adapt to builtin_type changes.
(gdb_CA_to_TAS): Use paddress to replace removed function paddr_nz.
* generic/gdbtk-register.c: Include "arch-utils.h".
(get_register_size): Replace current_gdbarch by get_current_arch call.
(get_register_types): Likewise.
(get_register): Likewise.
(get_register_name): Likewise.
(map_arg_registers): Likewise.
(register_changed_p): Likewise.
(setup_architecture_data): Likewise.
(gdb_regformat): Likewise.
(gdb_reggrouplist): Likewise.
(gdb_reggroup): Likewise.
* generic/gdbtk-stack.c: Inlcude "arch-utils.h".
(gdb_get_blocks): Use paddress instead of removed paddr_nz function.
(gdb_selected_block): Likewise.
(gdb_selected_frame): Likewise.
jkratoch [Tue, 7 Jul 2009 09:26:12 +0000 (09:26 +0000)]
gdb/
* mi/mi-cmd-var.c (mi_cmd_var_update): Replace a while loop by for loop.
* varobj.c (varobj_invalidate): Replace a while loop by for loop.
jkratoch [Tue, 7 Jul 2009 09:25:38 +0000 (09:25 +0000)]
gdb/testsuite/
* gdb.mi/mi2-var-cmd.exp (floating varobj invalidation): New test.
vprus [Tue, 7 Jul 2009 08:51:31 +0000 (08:51 +0000)]
Fix hang in floating varobjs.
* varob.c (varobj_invalidate): Advance to next
element when processing floating varobj.
vprus [Tue, 7 Jul 2009 08:47:09 +0000 (08:47 +0000)]
* varobj.c: Remove unnecessary include.
gingold [Tue, 7 Jul 2009 08:29:58 +0000 (08:29 +0000)]
2009-07-07 Tristan Gingold <gingold@adacore.com>
* gas/i386/jump.d: Adjust to be relocated offset for jump to external
symbol.
devans [Tue, 7 Jul 2009 08:09:19 +0000 (08:09 +0000)]
* Make-common.in (CGEN_CPU_EXTR,CGEN_CPU_READ): Pass canonical
identifiers for file types rather than encoding internal
implementation details of cgen.sh.
(CGEN_CPU_WRITE,CGEN_CPU_SEM,CGEN_CPU_SEMSW): Ditto.
* cgen.sh: Add support for parallel makes.
Rewrite cpu/decode handling to avoid generating "extrafiles" twice.
corinna [Tue, 7 Jul 2009 08:07:38 +0000 (08:07 +0000)]
* cygtls.cc (_cygtls::remove): Fix typo.
gingold [Tue, 7 Jul 2009 07:47:19 +0000 (07:47 +0000)]
2009-07-07 Tristan Gingold <gingold@adacore.com>
* config/i386/darwin.mh (NATDEPFILES): Remove excServer.o.
Remove excServer.c target. Remove _all target.
* darwin.defs: Removed.
amodra [Tue, 7 Jul 2009 03:26:46 +0000 (03:26 +0000)]
* elf32-spu.c (spu_elf_auto_overlay): Take into account section
alignment when packing sections into overlays.
dj [Tue, 7 Jul 2009 01:55:59 +0000 (01:55 +0000)]
[cgen]
* cpu/mep-core.cpu (fsft, ssarb): Mark as VOLATILE.
* cpu/mep-ivc2.cpu (many): Add VOLATILE to more insns that make
unspecified accesses to control registers.
[sid/component/cgen-cpu/mep]
* mep-cop1-16-decode.cxx: Regenerate.
* mep-cop1-16-decode.h: Regenerate.
* mep-cop1-16-defs.h: Regenerate.
* mep-cop1-16-model.cxx: Regenerate.
* mep-cop1-16-model.h: Regenerate.
* mep-cop1-16-sem.cxx: Regenerate.
* mep-cop1-32-decode.cxx: Regenerate.
* mep-cop1-32-decode.h: Regenerate.
* mep-cop1-32-defs.h: Regenerate.
* mep-cop1-32-model.cxx: Regenerate.
* mep-cop1-32-model.h: Regenerate.
* mep-cop1-32-sem.cxx: Regenerate.
* mep-cop1-48-decode.cxx: Regenerate.
* mep-cop1-48-decode.h: Regenerate.
* mep-cop1-48-defs.h: Regenerate.
* mep-cop1-48-model.cxx: Regenerate.
* mep-cop1-48-model.h: Regenerate.
* mep-cop1-48-sem.cxx: Regenerate.
* mep-cop1-64-decode.cxx: Regenerate.
* mep-cop1-64-decode.h: Regenerate.
* mep-cop1-64-defs.h: Regenerate.
* mep-cop1-64-model.cxx: Regenerate.
* mep-cop1-64-model.h: Regenerate.
* mep-cop1-64-sem.cxx: Regenerate.
* mep-core1-decode.cxx: Regenerate.
* mep-core1-decode.h: Regenerate.
* mep-core1-defs.h: Regenerate.
* mep-core1-model.cxx: Regenerate.
* mep-core1-model.h: Regenerate.
* mep-core1-sem.cxx: Regenerate.
* mep-cpu.h: Regenerate.
* mep-decode.cxx: Regenerate.
* mep-decode.h: Regenerate.
* mep-defs.h: Regenerate.
* mep-desc.h: Regenerate.
* mep-model.cxx: Regenerate.
* mep-model.h: Regenerate.
* mep-sem.cxx: Regenerate.
[opcodes]
* mep-desc.c: Regenerate.
* mep-desc.h: Regenerate.
* mep-opc.c: Regenerate.
* mep-opc.h: Regenerate.
gdbadmin [Tue, 7 Jul 2009 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
amodra [Tue, 7 Jul 2009 00:00:05 +0000 (00:00 +0000)]
daily update
cgf [Mon, 6 Jul 2009 23:19:08 +0000 (23:19 +0000)]
* Makefile.in (clean): Clean generated files in srcdir.
* tlsoffsets.h: Regenerate.
ian [Mon, 6 Jul 2009 23:11:21 +0000 (23:11 +0000)]
* fileread.cc (File_read::get_mtime): New method.
* fileread.h (Timespec): New structure.
(File_read::get_mtime): New method.
* incremental.cc (Incremental_inputs_entry_data::timestamp_usec):
Renamed from timestamp_nsec.
(Incremental_inputs_entry_write::timestamp_sec): Fix argument to
Elf_Xword.
(Incremental_inputs_entry_write::timestamp_usec): Renamed from
timestamp_nsec.
(Incremental_inputs::report_archive): Save mtime; style fix.
(Incremental_inputs::report_obejct): Save mtime; style fix.
(Incremental_inputs::report_script): Save mtime; style fix.
(Incremental_inputs::finalize_inputs): Style fix.
(Incremental_inputs::finalize): Style fix.
(Incremental_inputs::create_input_section_data): Store inputs
mtime.
* incremental.h (Incremental_inputs::report_script): Add mtime
argument.
(Incremental_inputs::Input_info::Input_info): Intialize only one
union member.
(Incremental_inputs::Input_info::archive): Move to nameless
union.
(Incremental_inputs::Input_info::obejct): Move to nameless union.
(Incremental_inputs::Input_info::script): Move to nameless union.
(Incremental_inputs::mtime): New field.
* script.cc (read_input_script): Pass file mtime to
Incremental_input.
* script.h (Script_info::inputs): Style fix.
cgf [Mon, 6 Jul 2009 23:05:09 +0000 (23:05 +0000)]
* cygtls.cc (_cygtls::remove): Avoid closing a NULL handle.
corinna [Mon, 6 Jul 2009 20:30:33 +0000 (20:30 +0000)]
* fhandler_socket.cc (fhandler_socket::recv_internal): Convert wsabuf
and wsacnt to references. Fix handling of WSAEMSGSIZE.
dwarak [Mon, 6 Jul 2009 19:34:29 +0000 (19:34 +0000)]
<gas changes>
2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
* config/tc-i386.c (cpu_arch): Add .fma4 and CPU_FMA4_FLAGS.
(build_modrm_byte): Add support to handle FMA4 instructions.
(md_show_usage): Add fma4.
<gas/testsuite changes>
2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
* gas/i386/i386.exp: Add FMA4 tests.
* gas/i386/x86-64-fma4.d: Ditto.
* gas/i386/fma4.d: Ditto.
* gas/i386/x86-64-fma4.s: Ditto.
* gas/i386/fma4.s: Ditto.
<opcodes changes>
2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
* i386-opc.h (CpuFMA4): Add CpuFMA4.
(i386_cpu_flags): New.
* i386-gen.c: Add CPU_FMA4_FLAGS.
* i386-opc.tbl: Add FMA4 instructions.
* i386-tbl.h: Regenerate.
* i386-init.h: Regenerate.
* i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
(OP_XMM_VexW): Ditto.
(OP_EX_VexW): Ditto.
(VEXI4_Fixup): Ditto.
(VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
(PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
(PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
(PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
(PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
(PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
(PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
(PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
(VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
(VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
(VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
(get_vex_imm8): New. handle FMA4.
(OP_EX_VexReg): Ditto.
drow [Mon, 6 Jul 2009 19:14:00 +0000 (19:14 +0000)]
* lib/java.exp (java_init): Ignore $GCJ if it is empty.
jjohnstn [Mon, 6 Jul 2009 18:59:03 +0000 (18:59 +0000)]
2009-07-06 Joel Sherrill <joel.sherrill@oarcorp.com>
* libc/include/sys/features.h: Enable UNIX98 mutex attributes
for RTEMS.
aristovski [Mon, 6 Jul 2009 18:52:14 +0000 (18:52 +0000)]
* configure.tgt (i[34567]86-*-nto*): Add build_gdbserver=yes.
jkratoch [Mon, 6 Jul 2009 18:51:10 +0000 (18:51 +0000)]
gdb/testsuite/
* lib/gdbserver-support.exp (gdbserver_start): Loop spawning
gdbserver increasing $portnum if "Can't bind address" has been seen.
aristovski [Mon, 6 Jul 2009 18:31:19 +0000 (18:31 +0000)]
Adding Neutrino gdbserver.
* configure: Regenerated.
* configure.ac: Add case for srv_qnx and set LIBS accordingly.
* configure.srv (i[34567]86-*-nto*): New target.
* nto-low.c, nto-low.h, nto-x86-low.c: New files.
* remote-utils.c [__QNX__]: Include sys/iomgr.h
(nto_comctrl) [__QNX__]: New function.
(enable_async_io, disable_async_io) [__QNX__]: Call nto_comctrl.
jkratoch [Mon, 6 Jul 2009 18:23:47 +0000 (18:23 +0000)]
gdb/
* source.c (find_and_open_source): Remove the `objfile' parameter.
Update the function comment.
(open_source_file, symtab_to_fullname, psymtab_to_fullname): Update the
find_and_open_source callers.
corinna [Mon, 6 Jul 2009 15:42:01 +0000 (15:42 +0000)]
* cygtls.h (struct _local_storage): Add thread storage pointers for
memory used by socket select functions. Combine them into a single
struct select.
* cygtls.cc: Accommodate above change throughout.
(_cygtls::init_thread): Drop initalizing of sockevt to
INVALID_HANDLE_VALUE.
(_cygtls::fixup_after_fork): Reset sockevt to NULL.
(_cygtls::remove): Don't use sockevt value to bail out prematurely.
Set sockevt to NULL. Free malloced select members.
* select.h (struct select_socket_info): Drop max_w4 member.
* select.cc (thread_socket): Use INFINITE timeout value if number of
objects to wait for is <= MAXIMUM_WAIT_OBJECTS. Use num_w4 member
of select_socket_info struct rather than dropped max_w4.
(init_tls_select_info): New inline function to initialize TLS select
members.
(start_thread_socket): Just call init_tls_select_info to initialize TLS
select members and use them later on.
(socket_cleanup): Don't free select_socket_info pointer members since
they are thread local now.
cgf [Mon, 6 Jul 2009 15:11:29 +0000 (15:11 +0000)]
* dtable.cc (handle_to_fn): Detect failing NtQueryObject.
gingold [Mon, 6 Jul 2009 14:45:56 +0000 (14:45 +0000)]
2009-07-06 Tristan Gingold <gingold@adacore.com>
* objdump.c (dump_dwarf_section): Handle .eh_frame like other dwarf
sections.
* dwarf.h (struct dwarf_section_display): Remove eh_frame field.
* dwarf.c (debug_displays): Adjust for removed field.
nickc [Mon, 6 Jul 2009 13:48:50 +0000 (13:48 +0000)]
* ld.texinfo: Fix typo.
corinna [Mon, 6 Jul 2009 10:44:13 +0000 (10:44 +0000)]
* autoload.cc: Delete stray CR.
gdbadmin [Mon, 6 Jul 2009 00:01:05 +0000 (00:01 +0000)]
*** empty log message ***
amodra [Mon, 6 Jul 2009 00:00:04 +0000 (00:00 +0000)]
daily update
palves [Sun, 5 Jul 2009 22:58:53 +0000 (22:58 +0000)]
Ooops. Fix date.
palves [Sun, 5 Jul 2009 22:38:19 +0000 (22:38 +0000)]
* gdb.base/ending-run.exp: Add "step out of main" pattern for
mingw32ce.
palves [Sun, 5 Jul 2009 22:21:40 +0000 (22:21 +0000)]
* gdb.base/long_long.exp: arm-mingw32ce defaults to natural-endian
VFP format.
palves [Sun, 5 Jul 2009 22:02:38 +0000 (22:02 +0000)]
* coff-pe-read.c (read_pe_exported_syms): Recognize
"pe-arm-wince-little" and "pei-arm-wince-little" bfd targets as PE
targets.
palves [Sun, 5 Jul 2009 21:23:42 +0000 (21:23 +0000)]
* arm-wince-tdep.c (arm_wince_skip_main_prologue): New.
(arm_wince_init_abi): Register it as gdbarch_skip_main_prologue
callback.
palves [Sun, 5 Jul 2009 19:30:08 +0000 (19:30 +0000)]
* configure.srv (i[34567]86-*-mingw32ce*): Add i386-low.o to
srv_tgtobj.
cgf [Sun, 5 Jul 2009 16:49:56 +0000 (16:49 +0000)]
* fhandler_console.cc: Change workstation -> windows station throughout.
cgf [Sun, 5 Jul 2009 00:01:26 +0000 (00:01 +0000)]
* cygwin-console-helper.cc: New file.
gdbadmin [Sun, 5 Jul 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
amodra [Sun, 5 Jul 2009 00:00:05 +0000 (00:00 +0000)]
daily update
cgf [Sat, 4 Jul 2009 23:51:09 +0000 (23:51 +0000)]
* autoload.cc (SetParent): Add new import.
* fhandler.h (fhandler_console::create_invisible_console): Declare new
function.
(create_invisible_console_workaround): Ditto.
* fhandler_console.cc (fhandler_console::create_invisible_console): Define new
function.
(create_invisible_console_workaround): Ditto. Add too much code to deal with
broken Windows 7. Use a helper app to start an invisible console window.
(fhandler_console::need_invisible): Reorganize to use helper functions to
create invisible console.
* spawn.cc (spawn_guts): Avoid zeroing already zeroed fields in si.
palves [Sat, 4 Jul 2009 18:13:28 +0000 (18:13 +0000)]
* win32-i386-low.c (i386_get_thread_context): Handle systems that
don't support CONTEXT_EXTENDED_REGISTERS.
(i386_win32_breakpoint, i386_win32_breakpoint_len): New.
(the_low_target): Install them.
* win32-low.c (get_child_debug_event): Handle WaitForDebugEvent
failing with ERROR_PIPE_NOT_CONNECTED.
davek [Sat, 4 Jul 2009 14:51:09 +0000 (14:51 +0000)]
* autoload.cc (AttachConsole): Correct size of args.
eliz [Sat, 4 Jul 2009 12:12:20 +0000 (12:12 +0000)]
*** empty log message ***
eliz [Sat, 4 Jul 2009 12:12:04 +0000 (12:12 +0000)]
* gdb.texinfo (GDB/MI Variable Objects): Document child definition
in -var-list-children. Fix example according to what the code
does.
amodra [Sat, 4 Jul 2009 01:50:43 +0000 (01:50 +0000)]
* config/tc-cr16.h (TC_LINKRELAX_FIXUP): Set only for code sections.
gdbadmin [Sat, 4 Jul 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
amodra [Sat, 4 Jul 2009 00:00:09 +0000 (00:00 +0000)]
daily update
cgf [Fri, 3 Jul 2009 18:05:49 +0000 (18:05 +0000)]
* dcrt0.cc (jit_debug): New global.
(initial_env): Set jit_debug when we are automatically starting a gdb process.
* dtable.cc (dtable::get_debugger_info): Don't tty tricks when we are being
debugged by our own captive gdb, as determined by jit_debug == true.
(dtable::init_std_file_from_handle): Detect errors when initializing a tty
early rather than at random points later.
* fhandler.h (fhandler_*::init): Return int to indicate success/failure.
* fhandler.cc (fhandler_base::init): Reflect change in return value.
* pipe.cc (fhandler_pipe::init): Ditto.
(fhandler_pipe::create_selectable): Don't say we're retrying when we aren't.
* fhandler_console.cc (fhandler_console::init): Ditto. Return success/failure.
* fhandler_serial.cc (fhandler_serial::init): Ditto.
* fhandler_tty.cc (fhandler_tty_slave::init): Ditto.
(fhandler_tty_slave::open): Make debugging output more detailed.
* tty.cc (tty_list::terminate): Don't close I/O handles before all slaves have
checked in.
(tty::slave_alive): Make a non-inlined function. Check if tty pipe handles can
be created as an additional exists check.
* tty.h (tty::slave_alive): Just define here.
davek [Fri, 3 Jul 2009 17:02:43 +0000 (17:02 +0000)]
2009-07-03 Cary Coutant <ccoutant@google.com>
* dwarf2.c (decode_line_info): Ignore DW_LNE_set_discriminator.
davek [Fri, 3 Jul 2009 16:07:38 +0000 (16:07 +0000)]
2009-07-03 Dave Korn <dave.korn.cygwin@gmail.com>
* coffcode.h (sec_to_styp_flags): Partially revert (functional
changes only) earlier patch:-
2009-06-25 Kai Tietz <kai.tietz@onevision.com>
* coffcode.h (sec_to_styp_flags): Set discardable for .reloc and
give .debug and .reloc data characteristics.
(DOT_RELOC): New define for .reloc section string.
(coff_write_object_contents): Use DOT_RELOC instead of string.
corinna [Fri, 3 Jul 2009 13:06:34 +0000 (13:06 +0000)]
* new-features.sgml (ov-new1.7-file): Add fpurge and mkstemps to new
API functions.
corinna [Fri, 3 Jul 2009 13:04:00 +0000 (13:04 +0000)]
* posix.sgml: Add fpurge and mkstemps to BSD list.
corinna [Fri, 3 Jul 2009 13:01:15 +0000 (13:01 +0000)]
* cygwin.din (fpurge, mkstemps): New exports.
* include/cygwin/version.h (CYGWIN_VERSION_API_MINOR): Bump.
* mktemp.cc (_gettemp): Add parameter.
(mkstemps): New function.
(mkstemp, mkdtemp, mktemp): Adjust clients.
gingold [Fri, 3 Jul 2009 12:06:30 +0000 (12:06 +0000)]
2009-06-29 Tristan Gingold <gingold@adacore.com>
* i386-darwin-tdep.c (amd64_darwin_thread_state_reg_offset)
(amd64_darwin_thread_state_num_regs)
(amd64_darwin_sigcontext_addr, x86_darwin_init_abi_64): Moved to
amd64-darwin-tdep.c
(_initialize_i386_darwin_tdep): Remove 64 bits parts.
(darwin_dwarf_signal_frame_p): Make public.
* amd64-darwin-tdep.c: New file with most chunks from
i386-darwin-tdep.c
* i386-darwin-tdep.h: Add a prototype for darwin_dwarf_signal_frame_p.
(amd64_darwin_thread_state_reg_offset)
(amd64_darwin_thread_state_num_regs): Moved to amd64-darwin-tdep.h
* amd64-darwin-tdep.h: New file.
* i386-darwin-nat.c: Only includes amd64-nat.h and amd64-darwin-tdep.h
if BFD64 is defined.
(i386_darwin_fetch_inferior_registers): Add #ifdef BFD64/#endif around
64 bits parts.
(i386_darwin_store_inferior_registers): Ditto.
(darwin_set_sstep): Ditto.
(darwin_complete_target): Ditto.
(amd64_darwin_sstep_at_sigreturn): Ditto.
* configure.tgt: Create a separate entry for x86_64-*-darwin.
Add 64 bits support for i386-*-darwin if --enable-64-bit-bfd.
* Makefile.in (ALLDEPFILES): Add amd64-darwin-tdep.c, darwin-nat.c,
i386-darwin-tdep.c i386-darwin-nat.c
(ALL_64_TARGET_OBS): Add amd64-darwin-tdep.o
ericb [Fri, 3 Jul 2009 12:03:24 +0000 (12:03 +0000)]
Add mkdtemp, mkstemps.
* libc/stdio/mktemp.c: Fix documentation.
(_gettemp): Add domkdir and length parameters. Check for
insufficient 'X' suffix. Drop cygwin-specific code.
(_mkstemp_r, _mktemp_r, mkstemp, mktemp): Adjust clients.
(_mkdtemp_r, _mkstemps_r, mkdtemp, mkstemps): New functions.
* libc/include/stdlib.h (_mkdtemp_r, _mkstemps_r, mkdtemp)
(mkstemps): Declare them.
ericb [Fri, 3 Jul 2009 11:58:00 +0000 (11:58 +0000)]
Add fpurge.
* libc/stdio/fpurge.c (fpurge, _fpurge_r): New file.
* libc/stdio/Makefile.am (ELIX_4_SOURCES, CHEWOUT_FILES, fpurge):
Build it.
* libc/stdio/Makefile.in: Regenerated.
* libc/include/stdio.h (fpurge, _fpurge_r): New declarations.
* libc/stdio/stdio.tex: Build documentation.
corinna [Fri, 3 Jul 2009 10:50:51 +0000 (10:50 +0000)]
* autoload.cc: Fix typo in comment.
(ShowWindowAsync): Define.
(AttachConsole): Define.
* fhandler_console.cc (fhandler_console::need_invisible): Add band-aid
for Windows 7 AllocConsole bug.
gingold [Fri, 3 Jul 2009 10:44:57 +0000 (10:44 +0000)]
2009-07-03 Tristan Gingold <gingold@adacore.com>
* scripttempl/pep.sc: Put .eh_frame in its own section.
* scripttempl/pe.sc: Ditto.
jakub [Fri, 3 Jul 2009 08:53:49 +0000 (08:53 +0000)]
* dwarf2.h (enum dwarf_location_atom): Add DW_OP_implicit_value
and DW_OP_stack_value.
* dwarf.c (decode_location_expression): Handle DW_OP_stack_value
and DW_OP_implicit_value.
amodra [Fri, 3 Jul 2009 00:00:09 +0000 (00:00 +0000)]
daily update
gdbadmin [Fri, 3 Jul 2009 00:00:04 +0000 (00:00 +0000)]
*** empty log message ***
palves [Thu, 2 Jul 2009 22:24:04 +0000 (22:24 +0000)]
* linux-fork.c (forks_exist_p): Drop unnecessary extern.
(add_fork, linux_fork_killall, linux_fork_mourn_inferior)
(linux_fork_detach): Ditto.
(delete_fork_command): Rename to ...
(delete_checkpoint_command): ... this.
(detach_fork_command): Rename to ...
(detach_checkpoint_command): ... this.
(info_forks_command): Rename to ...
(info_checkpoints_command): ... this.
(_initialize_linux_fork): Remove stale comments. Adjust.
palves [Thu, 2 Jul 2009 21:57:27 +0000 (21:57 +0000)]
gdb/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* linux-nat.c (linux_child_follow_fork): If we're staying attached
to the child process, enable event reporting on it. Don't handle
checkpoints here. Instead, add the child fork to the lwp thread
and inferior lists without clobbering the previous inferior. Let
the thread_db layer learn about a new child process, even if
following the parent.
(linux_nat_switch_fork): Delete lwps of the current inferior only,
instead of clearing the whole list. Use thread_change_ptid to
give the core the illusion the new checkpoint is still the same
inferior. Clear the register cache.
(linux_handle_extended_wait): Handle checkpoints here.
(linux_multi_process): Turn on.
* linux-fork.c (struct fork_info) <pc>: Remove field.
(init_fork_list): Do not delete the checkpoint from the inferior
list (it is not there).
(fork_load_infrun_state): Don't switch inferior_ptid here. Pass
the new checkpoint's ptid to linux_nat_switch_fork.
(fork_save_infrun_state): Make static. Don't stop the pc field of
fork_info, it's gone.
(linux_fork_mourn_inferior): Don't delete the checkpoint from the
inferior list, it's not there.
(linux_fork_detach): Ditto.
(delete_fork_command): Replace mention of fork/checkpoint by
checkpoint only.
(detach_fork_command): Likewise. Don't delete the checkpoint from
the inferior list.
(info_forks_command): Adjust.
(restore_detach_fork): Delete.
(checkpointing_pid): New.
(linux_fork_checkpointing_p): New.
(save_detach_fork): Delete.
(checkpoint_command): Delete temp_detach_fork. Don't remove
breakpoints, that's a nop. Store the pid of the process we're
checkpointing, and use make_cleanup_restore_integer to restore it.
Don't reinsert breakpoints here.
(process_command, fork_command): Delete.
(restart_command): Update comments to only mention checkpoints,
not forks.
(_initialize_linux_fork): Delete "fork", "process", "info forks"
commands.
* linux-fork.h (fork_save_infrun_state, fork_list): Delete
declarations.
(linux_fork_checkpointing_p): Declare.
* cli/cli-cmds.c (killlist): New.
* cli/cli-cmds.h (killlist): Declare.
* gdbcmd.h (killlist): Declare.
* inferior.c: Include "gdbthread.h".
(detach_inferior_command, kill_inferior_command)
(inferior_command): New.
(info_inferiors_command): Allow specifying a specific inferior id.
(_initialize_inferiors): Register "inferior", "kill inferior" and
"detach inferior" commands.
* infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
* gdbthread.h (any_thread_of_process): Declare.
* thread.c (any_thread_of_process): New.
* NEWS: Mention multi-inferior debugging. Mention 'info
inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
new commands.
(Removed commands): New section, mentioning that 'info forks',
'fork', 'process', 'delete fork' and 'detach fork' are now gone.
gdb/testsuite/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.base/multi-forks.exp: Only run detach-on-fork tests on
linux. Adjust to use "inferior", "info inferiors", "detach
inferior" and "kill inferior" instead of "restart", "info fork",
"detach fork" and "delete fork".
* gdb.base/ending-run.exp: Spell out "info".
* gdb.base/help.exp: Adjust to use test_prefix_command_help for
the "kill" command.
gdb/doc/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Debugging multiple inferiors): Document the
"inferior", "detach inferior" and "kill inferior" commands.
(Debugging Programs with Multiple Processes): Adjust to mention
generic "inferior" commands. Delete mention of "detach fork" and
"delete fork". Cross reference to "Debugging multiple inferiors"
section.
uweigand [Thu, 2 Jul 2009 17:29:17 +0000 (17:29 +0000)]
* gdbarch.sh (current_gdbarch): Remove global variable.
(find_arch_by_info): Remove, inline into ...
(gdbarch_find_by_info): ... this. Remove current_gdbarch swapping.
(deprecated_current_gdbarch_select_hack): Rename to ...
(deprecated_target_gdbarch_select_hack): ... this. Do not set
or access current_gdbarch.
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.c (gdbarch_update_p): Update call.
(set_gdbarch_from_file): Likewise.
uweigand [Thu, 2 Jul 2009 17:25:51 +0000 (17:25 +0000)]
* defs.h (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer): Add BYTE_ORDER parameter.
* findvar.c (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer): Add BYTE_ORDER parameter. Use it
instead of current_gdbarch.
* gdbcore.h (read_memory_integer, safe_read_memory_integer,
read_memory_unsigned_integer, write_memory_signed_integer,
write_memory_unsigned_integer): Add BYTE_ORDER parameter.
* corefile.c (struct captured_read_memory_integer_arguments): Add
BYTE_ORDER member.
(safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
struct captured_read_memory_integer_arguments.
(do_captured_read_memory_integer): Pass it to read_memory_integer.
(read_memory_integer): Add BYTE_ORDER parameter. Pass it to
extract_signed_integer.
(read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
extract_unsigned_integer.
(write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
to store_signed_integer.
(write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
to store_unsigned_integer.
* target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
* target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
Pass it to extract_unsigned_integer.
Update calls to extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer, read_memory_integer,
read_memory_unsigned_integer, safe_read_memory_integer,
write_memory_signed_integer, write_memory_unsigned_integer, and
get_target_memory_unsigned to pass byte order:
* ada-lang.c (ada_value_binop): Update.
* ada-valprint.c (char_at): Update.
* alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
* alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
alpha_extract_return_value, alpha_read_insn,
alpha_get_longjmp_target): Update.
* amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
* amd64obsd-tdep.c (amd64obsd_supply_uthread,
amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
* amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
amd64_displaced_step_fixup): Update.
* arm-linux-tdep.c (arm_linux_sigreturn_init,
arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
* arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
arm_return_value): Update.
* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
* auxv.c (default_auxv_parse): Update.
* avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
avr_scan_prologue, avr_extract_return_value,
avr_frame_prev_register, avr_push_dummy_call): Update.
* bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
bsd_uthread_wait, bsd_uthread_thread_alive,
bsd_uthread_extra_thread_info): Update.
* c-lang.c (c_printstr, print_wchar): Update.
* cp-valprint.c (cp_print_class_member): Update.
* cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
cris_extract_return_value, find_step_target, dip_prefix,
sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
move_mem_to_reg_movem_op, get_data_from_address): Update.
* dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
* dwarf2-frame.c (execute_cfa_program): Update.
* dwarf2loc.c (find_location_expression): Update.
* dwarf2read.c (dwarf2_const_value): Update.
* expprint.c (print_subexp_standard): Update.
* findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
unsigned_address_to_pointer, address_to_signed_pointer,
read_var_value): Update.
* frame.c (frame_unwind_register_signed,
frame_unwind_register_unsigned, get_frame_memory_signed,
get_frame_memory_unsigned): Update.
* frame-unwind.c (frame_unwind_got_constant): Update.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Update.
* frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
frv_extract_return_value, find_func_descr,
frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
* f-valprint.c (f_val_print): Update.
* gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
Update.
* h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
h8300_push_dummy_call, h8300_extract_return_value,
h8300h_extract_return_value, h8300_store_return_value,
h8300h_store_return_value): Update.
* hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
* hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
Update.
* hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
hppa64_hpux_in_solib_call_trampoline,
hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
hppa_hpux_sigtramp_frame_unwind_cache,
hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
hppa32_hpux_search_dummy_call_sequence,
hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
hppa_hpux_unwind_adjust_stub): Update.
* hppa-linux-tdep.c (insns_match_pattern,
hppa_linux_find_global_pointer): Update.
* hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
hppa_pseudo_register_read, hppa_frame_prev_register_helper,
hppa_match_insns): Update.
* hpux-thread.c (hpux_thread_fetch_registers): Update.
* i386-tdep.c (i386bsd_sigcontext_addr): Update.
* i386-cygwin-tdep.c (core_process_module_section): Update.
* i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
amd64_darwin_sstep_at_sigreturn): Update.
* i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
amd64_darwin_sigcontext_addr): Likewise.
* i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
* i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
* i386obsd-nat.c (i386obsd_supply_pcb): Update.
* i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
i386obsd_trapframe_cache): Update.
* i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
i386_analyze_frame_setup, i386_analyze_prologue,
i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
i386_get_longjmp_target, i386_push_dummy_call,
i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
i386_fetch_pointer_argument): Update.
* i387-tdep.c (i387_supply_fsave): Update.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
* ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
ia64_libunwind_frame_prev_register,
ia64_libunwind_sigtramp_frame_this_id,
ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
find_extant_func_descr, find_func_descr,
ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
ia64_unwind_pc): Update.
* iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
iq2000_scan_prologue, iq2000_extract_return_value,
iq2000_push_dummy_call): Update.
* irix5nat.c (fill_gregset): Update.
* jv-lang.c (evaluate_subexp_java): Update.
* jv-valprint.c (java_value_print): Update.
* lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
lm32_extract_return_value, lm32_store_return_value): Update.
* m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
m32c_m16c_pointer_to_address): Update.
* m32r-tdep.c (m32r_store_return_value, decode_prologue,
m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
Update.
* m68hc11-tdep.c (m68hc11_pseudo_register_read,
m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
m68hc11_push_dummy_call): Update.
* m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
Update.
* m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
m68k_get_longjmp_target): Update.
* m88k-tdep.c (m88k_fetch_instruction): Update.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
* mi/mi-main.c (mi_cmd_data_write_memory): Update.
* mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
mips64_linux_get_longjmp_target, mips64_fill_gregset,
mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
* mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
* mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
mips_o32_push_dummy_call, mips_o64_push_dummy_call,
mips_single_step_through_delay, mips_skip_pic_trampoline_code,
mips_integer_to_address): Update.
* mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
Update.
* monitor.c (monitor_supply_register, monitor_write_memory,
monitor_read_memory_single): Update.
* moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
moxie_analyze_prologue): Update.
* mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
mt_push_dummy_call): Update.
* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
read_objc_methlist_method, read_objc_object, read_objc_super,
read_objc_class, find_implementation_from_class): Update.
* ppc64-linux-tdep.c (ppc64_desc_entry_point,
ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
Update.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
ppcobsd_sigtramp_frame_cache): Update.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
ppc64_sysv_abi_return_value): Update.
* ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
* procfs.c (procfs_auxv_parse): Update.
* p-valprint.c (pascal_val_print): Update.
* regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
regcache_raw_write_signed, regcache_raw_write_unsigned,
regcache_cooked_read_signed, regcache_cooked_read_unsigned,
regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
* remote-m32r-sdi.c (m32r_fetch_register): Update.
* remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
Update.
* rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
rs6000_convert_from_func_ptr_addr, branch_dest,
rs6000_software_single_step): Update.
* rs6000-tdep.c (rs6000_in_function_epilogue_p,
ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
rs6000_frame_cache): Update.
* s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
* scm-exp.c (scm_lreadr): Update.
* scm-lang.c (scm_get_field, scm_unpack): Update.
* scm-valprint.c (scm_val_print): Update.
* score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
score_fetch_inst): Update.
* sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
sh64_pseudo_register_read, sh64_pseudo_register_write,
sh64_frame_prev_register): Update:
* sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
* solib-darwin.c (darwin_load_image_infos): Update.
* solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
find_canonical_descriptor_in_load_object): Update.
* solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
irix_open_symbol_file_object): Update.
* solib-som.c (som_solib_create_inferior_hook, link_map_start,
som_current_sos, som_open_symbol_file_object): Update.
* solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
Update.
* solib-svr4.c (read_program_header, scan_dyntag_auxv,
solib_svr4_r_ldsomap): Update.
* sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
* sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
sparc64obsd_collect_uthread): Update.
* sparc64-tdep.c (sparc64_pseudo_register_read,
sparc64_pseudo_register_write, sparc64_supply_gregset,
sparc64_collect_gregset): Update.
* sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
* sparcobsd-tdep.c (sparc32obsd_supply_uthread,
sparc32obsd_collect_uthread): Update.
* sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
sparc_collect_rwindow): Update.
* spu-linux-nat.c (parse_spufs_run): Update.
* spu-tdep.c (spu_pseudo_register_read_spu,
spu_pseudo_register_write_spu, spu_pointer_to_address,
spu_analyze_prologue, spu_in_function_epilogue_p,
spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
info_spu_dma_command, info_spu_proxydma_command): Update.
* stack.c (print_frame_nameless_args, frame_info): Update.
* symfile.c (read_target_long_array, simple_read_overlay_table,
simple_read_overlay_region_table): Update.
* target.c (debug_print_register): Update.
* tramp-frame.c (tramp_frame_start): Update.
* v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
v850_extract_return_value, v850_store_return_value,
* valarith.c (value_binop, value_bit_index): Update.
* valops.c (value_cast): Update.
* valprint.c (val_print_type_code_int, val_print_string,
read_string): Update.
* value.c (unpack_long, unpack_double, unpack_field_as_long,
modify_field, pack_long): Update.
* vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
vax_skip_prologue): Update.
* xstormy16-tdep.c (xstormy16_push_dummy_call,
xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
* xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
xtensa_pseudo_register_write, xtensa_frame_cache,
xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
* dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
BYTE_ORDER parameter.
(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
parameters.
(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
* dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
instead of current_gdbarch.
(decimal_to_string, decimal_from_integral, decimal_from_floating,
decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
Pass it to match_endianness.
(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
parameters. Pass them to match_endianness.
(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
Pass them to match_endianness.
(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
Pass them to match_endianness.
* valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
BYTE_ORDER_Y output parameters.
(value_binop): Update call to value_args_as_decimal.
Update calls to decimal_to_string, decimal_from_string,
decimal_from_integral, decimal_from_floating, decimal_to_doublest,
decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
to pass/receive byte order:
* c-exp.y (parse_number): Update.
* printcmd.c (printf_command): Update.
* valarith.c (value_args_as_decimal, value_binop, value_logical_not,
value_equal, value_less): Update.
* valops.c (value_cast, value_one): Update.
* valprint.c (print_decimal_floating): Update.
* value.c (unpack_long, unpack_double): Update.
* python/python-value.c (valpy_nonzero): Update.
* ada-valprint.c (char_at): Add BYTE_ORDER parameter.
(printstr): Update calls to char_at.
(ada_val_print_array): Likewise.
* valprint.c (read_string): Add BYTE_ORDER parameter.
(val_print_string): Update call to read_string.
* c-lang.c (c_get_string): Likewise.
* charset.h (target_wide_charset): Add BYTE_ORDER parameter.
* charset.c (target_wide_charset): Add BYTE_ORDER parameter.
Use it instead of current_gdbarch.
* printcmd.c (printf_command): Update calls to target_wide_charset.
* c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
Pass to target_wide_charset. Use it instead of current_gdbarch.
(classify_type): Add BYTE_ORDER parameter. Pass to
charset_for_string_type. Allow NULL encoding pointer.
(print_wchar): Add BYTE_ORDER parameter.
(c_emit_char): Update calls to classify_type and print_wchar.
(c_printchar, c_printstr): Likewise.
* gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
parameter.
* arch-utils.c (generic_in_solib_return_trampoline): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
(rs6000_skip_trampoline_code): Update call.
* alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
(alpha_read_insn): Add GDBARCH parameter.
* alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
(alpha_register_to_value): Pass architecture to alpha_sts.
(alpha_extract_return_value): Likewise.
(alpha_value_to_register): Pass architecture to alpha_lds.
(alpha_store_return_value): Likewise.
(alpha_read_insn): Add GDBARCH parameter.
(alpha_skip_prologue): Pass architecture to alpha_read_insn.
(alpha_heuristic_proc_start): Likewise.
(alpha_heuristic_frame_unwind_cache): Likewise.
(alpha_next_pc): Likewise.
(alpha_sigtramp_frame_this_id): Pass architecture to
tdep->dynamic_sigtramp_offset callback.
(alpha_sigtramp_frame_sniffer): Pass architecture to
tdep->pc_in_sigtramp callback.
* alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
(alphafbsd_sigtramp_offset): Likewise.
* alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
parameter. Pass to alpha_read_insn.
(alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
alpha_linux_sigtramp_offset_1.
(alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alpha_linux_sigtramp_offset.
(alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
and alpha_linux_sigtramp_offset.
* alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
(alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alphanbsd_sigtramp_offset.
* alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
(alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alpha_read_insn.
(alphaobsd_sigcontext_addr): Pass architecture to
alphaobsd_sigtramp_offset.
* alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
parameter.
* amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
(amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
(amd64_frame_cache): Likewise.
* arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
(thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
* arm-wince-tdep.c: Include "frame.h".
* avr-tdep.c (EXTRACT_INSN): Remove.
(avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
(avr_skip_prologue): Pass architecture to avr_scan_prologue.
(avr_frame_unwind_cache): Likewise.
* cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
(find_step_target): Initialize it.
(get_data_from_address): Add BYTE_ORDER parameter.
(bdap_prefix): Pass byte order to get_data_from_address.
(handle_prefix_assign_mode_for_aritm_op): Likewise.
(three_operand_add_sub_cmp_and_or_op): Likewise.
(handle_inc_and_index_mode_for_aritm_op): Likewise.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
(frv_linux_sigcontext_reg_addr): Pass architecture to
frv_linux_pc_in_sigtramp.
(frv_linux_sigtramp_frame_sniffer): Likewise.
* h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
(h8300_analyze_prologue): Add GDBARCH parameter. Pass to
h8300_is_argument_spill.
(h8300_frame_cache, h8300_skip_prologue): Pass architecture
to h8300_analyze_prologue.
* hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
in_solib_call_trampoline callback.
(hppa_in_solib_call_trampoline): Add GDBARCH parameter.
* hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
parameter.
(hppa64_push_dummy_call): Pass architecture to
hppa64_convert_code_addr_to_fptr.
(hppa_match_insns): Add GDBARCH parameter.
(hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
hppa_match_insns.
(hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
(hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
hppa_match_insns_relaxed.
(hppa_stub_unwind_sniffer): Pass architecture to
tdep->in_solib_call_trampoline callback.
* hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
(hppa32_hpux_search_dummy_call_sequence): Pass architecture to
hppa_hpux_search_pattern.
* hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
(hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
Pass to insns_match_pattern.
(hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
hppa_linux_sigtramp_find_sigcontext.
(hppa_linux_sigtramp_frame_sniffer): Likewise.
(hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
(hppa64_hpux_in_solib_call_trampoline): Likewise.
* i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
(i386_analyze_frame_setup): Add GDBARCH parameter.
(i386_analyze_prologue): Add GDBARCH parameter. Pass to
i386_follow_jump and i386_analyze_frame_setup.
(i386_skip_prologue): Pass architecture to i386_analyze_prologue
and i386_follow_jump.
(i386_frame_cache): Pass architecture to i386_analyze_prologue.
(i386_pe_skip_trampoline_code): Add FRAME parameter.
* i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
* i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
frame to i386_pe_skip_trampoline_code.
* ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
to sigcontext_register_address callback.
* ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
(ia64_find_unwind_table): Pass architecture to
ia64_find_global_pointer.
(find_extant_func_descr): Add GDBARCH parameter.
(find_func_descr): Pass architecture to find_extant_func_descr
and ia64_find_global_pointer.
(ia64_sigtramp_frame_init_saved_regs): Pass architecture to
tdep->sigcontext_register_address callback.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
GDBARCH parameter.
* iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
(iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
* lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
(lm32_skip_prologue, lm32_frame_cache): Pass architecture to
lm32_analyze_prologue.
* m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
(m32r_skip_prologue): Pass architecture to decode_prologue.
* m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
(m68hc11_scan_prologue): Pass architecture to
m68hc11_analyze_instruction.
* m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
(m68k_analyze_prologue): Pass architecture to
m68k_analyze_frame_setup.
* m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
(m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
to m88k_fetch_instruction.
(m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
(m88k_frame_cache): Likewise.
* mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
(mep_analyze_prologue): Pass architecture to mep_get_insn.
* mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
(mips32_next_pc): Pass architecture to mips_fetch_instruction.
(deal_with_atomic_sequence): Likewise.
(unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
(mips16_scan_prologue): Likewise.
(mips32_scan_prologue): Likewise.
(mips16_in_function_epilogue_p): Likewise.
(mips32_in_function_epilogue_p): Likewise.
(mips_about_to_return): Likewise.
(mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
(mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
(mips_skip_prologue): Pass architecture to mips16_scan_prologue
and mips32_scan_prologue.
(mips_in_function_epilogue_p): Pass architecture to
mips16_in_function_epilogue_p and
mips32_in_function_epilogue_p.
(heuristic_proc_start): Pass architecture to mips_fetch_instruction
and mips_about_to_return.
(mips_skip_mips16_trampoline_code): Pass architecture to
mips_fetch_instruction.
(fetch_mips_16): Add GDBARCH parameter.
(mips16_next_pc): Pass architecture to fetch_mips_16.
(extended_mips16_next_pc): Pass architecture to unpack_mips16 and
fetch_mips_16.
* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
read_objc_methlist_method, read_objc_object, read_objc_super,
read_objc_class): Add GDBARCH parameter.
(find_implementation_from_class): Add GDBARCH parameter, pass
to read_objc_class, read_objc_methlist_nmethods, and
read_objc_methlist_method.
(find_implementation): Add GDBARCH parameter, pass to
read_objc_object and find_implementation_from_class.
(resolve_msgsend, resolve_msgsend_stret): Pass architecture
to find_implementation.
(resolve_msgsend_super, resolve_msgsend_super_stret): Pass
architecture to read_objc_super and find_implementation_from_class.
* ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
ppc64_standard_linkage3_target): Pass architecture to
ppc64_desc_entry_point.
* rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
(skip_prologue): Pass byte order to bl_to_blrl_insn_p.
(rs6000_fetch_instruction): Add GDBARCH parameter.
(rs6000_skip_stack_check): Add GDBARCH parameter, pass to
rs6000_fetch_instruction.
(skip_prologue): Pass architecture to rs6000_fetch_instruction.
* remote-mips.c (mips_store_word): Return old_contents as host
integer value instead of target bytes.
* s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
(s390_analyze_prologue): Initialize it.
(extend_simple_arg): Add GDBARCH parameter.
(s390_push_dummy_call): Pass architecture to extend_simple_arg.
* scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
* scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
(SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
* scm-valprint.c (scm_scmval_print): Likewise.
(scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
SCM_BYTE_ORDER.
* sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
(sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
look_for_args_moves.
(sh64_skip_prologue): Pass architecture to
sh64_skip_prologue_hard_way.
* sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
(sh_skip_prologue): Pass architecture to sh_analyze_prologue.
(sh_frame_cache): Likewise.
* solib-irix.c (extract_mips_address): Add GDBARCH parameter.
(fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
Pass architecture to extract_mips_address.
* sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
* sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
(sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
to sparc_fetch_wcookie.
(sparc32_frame_prev_register): Likewise.
* sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
* sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
* spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
(spu_skip_prologue): Pass architecture to spu_analyze_prologue.
(spu_virtual_frame_pointer): Likewise.
(spu_frame_unwind_cache): Likewise.
(info_spu_mailbox_list): Add BYTE_ORER parameter.
(info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
(info_spu_dma_cmdlist): Add BYTE_ORER parameter.
(info_spu_dma_command, info_spu_proxydma_command): Pass byte order
to info_spu_dma_cmdlist.
* symfile.c (read_target_long_array): Add GDBARCH parameter.
(simple_read_overlay_table, simple_read_overlay_region_table,
simple_overlay_update_1): Pass architecture to read_target_long_array.
* v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
(v850_frame_cache): Pass architecture to v850_analyze_prologue.
* xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
parameter.
(xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
to xstormy16_analyze_prologue.
(xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
(xstormy16_find_jmp_table_entry): Likewise.
(xstormy16_skip_trampoline_code): Pass architecture to
xstormy16_resolve_jmp_table_entry.
(xstormy16_pointer_to_address): Likewise.
(xstormy16_address_to_pointer): Pass architecture to
xstormy16_find_jmp_table_entry.
* xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
(call0_analyze_prologue): Add GDBARCH parameter, pass to
call0_track_op.
(call0_frame_cache): Pass architecture to call0_analyze_prologue.
(xtensa_skip_prologue): Likewise.
uweigand [Thu, 2 Jul 2009 17:21:03 +0000 (17:21 +0000)]
* defs.h (strlen_paddr, paddr, paddr_nz): Remove.
(paddress): Add GDBARCH parameter.
* utils.c (strlen_paddr, paddr, paddr_nz): Remove.
(paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
* ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
* ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
use it instead of current_gdbarch.
Update calls to ui_out_field_core_addr to pass architecture:
* ada-lang.c (print_one_exception): Update.
* breakpoint.c (print_one_breakpoint_location,
print_one_exception_catchpoint): Update.
* disasm.c (dump_insns): Update.
* darwin-nat-info.c (darwin_debug_regions_recurse): Update.
* mi/mi-main.c (mi_cmd_data_read_memory): Update.
* mi/mi-symbol-cmds.c: Include "objfiles.h".
(mi_cmd_symbol_list_lines): Update.
* stack.c (print_frame_info, print_frame): Update.
Update callers of paddress to pass architecture:
* ada-tasks.c (info_task): Update.
* ada-valprint.c (ada_val_print_1): Update.
* annotate.c (annotate_source, annotate_frame_begin): Update.
* breakpoint.c (insert_bp_location, describe_other_breakpoints,
mention): Update.
* cli/cli-cmds.c (edit_command, list_command, print_disassembly):
Update.
* corefile.c (memory_error): Update.
* c-valprint.c (print_function_pointer_address, c_val_print): Update.
* disasm.c (dis_asm_print_address): Update.
* exec.c (print_section_info): Update.
* f-valprint.c (f_val_print): Update.
* infcmd.c: Include "arch-utils.h".
(jump_command, program_info): Update.
* linux-fork.c: Include "arch-utils.h".
(info_forks_command): Update.
* m2-valprint.c (print_function_pointer_address,
print_unpacked_pointer, print_variable_at_address,
m2_val_print): Update.
* m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
Update.
* printcmd.c (print_address, print_address_demangle, address_info):
Update.
* p-valprint.c (pascal_val_print): Update.
* source.c: Include "arch-utils.h".
(line_info): Update.
* stack.c (frame_info, print_block_frame_labels): Update.
* symfile.c (add_symbol_file_command, list_overlays_command): Update.
* symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
print_symbol, print_partial_symbols, maintenance_info_psymtabs,
maintenance_check_symtabs): Update.
* symtab.c (find_pc_sect_symtab): Update.
* target.c (deprecated_debug_xfer_memory): Update.
* tracepoint.c (scope_info): Update.
* tui/tui-stack.c (tui_make_status_line): Update.
* valprint.c (val_print_string): Update.
Update callers of paddr_nz to use paddress instead (keeping
user-visible output identical):
* alpha-tdep.c (alpha_heuristic_proc_start): Update.
* amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
amd64_displaced_step_fixup): Update.
* arch-utils.c (simple_displaced_step_copy_insn): Update.
* auxv.c (fprint_target_auxv): Update.
* breakpoint.c (insert_single_step_breakpoint): Update.
* buildsym.c (finish_block): Update.
* cli/cli-dump.c (restore_section_callback): Update.
* fbsd-nat.c (fbsd_find_memory_regions): Update.
* frame.c (frame_unwind_register_value): Update.
* gcore.c (gcore_create_callback): Update.
* hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
* i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
i386_record_lea_modrm_addr, i386_record_lea_modrm,
i386_process_record): Update.
* ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
* infrun.c (displaced_step_prepare, displaced_step_fixup,
handle_inferior_event, insert_step_resume_breakpoint_at_sal,
insert_longjmp_resume_breakpoint): Update.
* linux-nat.c (linux_nat_find_memory_regions): Update.
* linux-record.c (record_linux_system_call): Update.
* mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
mips_o64_push_dummy_call): Update.
* monitor.c (monitor_error, monitor_remove_breakpoint): Update.
* record.c (record_arch_list_add_mem, record_wait,
record_xfer_partial): Update.
* remote-mips.c (mips_fetch_word, mips_check_lsi_error,
mips_common_breakpoint): Update.
* remote-sim.c (gdbsim_xfer_inferior_memory): Update.
* rs6000-tdep.c (ppc_displaced_step_fixup): Update.
* solib-som.c (som_current_sos): Update.
* symfile.c (load_progress, generic_load): Update.
* symfile-mem.c (add_vsyscall_page): Update.
* valops.c (value_fetch_lazy): Update.
* windows-tdep.c (windows_xfer_shared_library): Update.
Update callers of paddr_nz to use paddress instead (changing
user-visible output to make it more correct):
* dwarf2loc.c (locexpr_describe_location): Update.
* ia64-tdep.c (ia64_memory_insert_breakpoint,
ia64_memory_remove_breakpoint): Update.
* jv-valprint.c (java_value_print): Update.
* m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
* monitor.c (monitor_read_memory): Update.
Update callers of paddr to use paddress instead (changing
user-visible output to make it more correct):
* arm-tdep.c (arm_push_dummy_call): Update.
* breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
create_breakpoint): Update.
* darwin-nat-info.c (darwin_debug_regions): Update.
* dcache.c (dcache_info): Update.
* dsrec.c (load_srec, make_srec): Update.
* dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
dwarf2_frame_cache): Update.
* gcore.c (gcore_copy_callback): Update.
* gnu-nat.c (gnu_xfer_memory): Update.
* mips-linux-nat.c (mips_show_dr): Update.
* monitor.c (monitor_write_memory, monitor_insert_breakpoint,
monitor_remove_breakpoint): Update.
* remote.c (compare_sections_command): Update.
* remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
m32r_remove_breakpoint, m32r_insert_watchpoint,
m32r_remove_watchpoint): Update.
* sol-thread.c (info_cb): Update.
* symfile.c (load_progress): Update.
Update callers of paddress or paddr_nz to use hex_string instead
(changes output of internal/error/debug messages only):
* dwarf2read.c (dump_die_shallow): Update.
* frame.c (fprint_field, fprint_frame, frame_pc_unwind,
get_frame_func, create_new_frame): Update.
* hppa-tdep.c (find_unwind_entry, unwind_command): Update.
* ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
ia64_get_dyn_info_list): Update.
* maint.c (maintenance_translate_address): Update.
* mi/mi-cmd-var.c (mi_cmd_var_create): Update.
* target.c (target_flash_erase): Update.
Update callers of paddr/paddr_nz to use phex/phex_nz instead,
using an appropriate address size. Remove use of strlen_paddr.
* exec.c (exec_files_info): Update.
* i386-nat.c (i386_show_dr): Update.
* remote.c (remote_flash_erase): Update.
* m32r-rom.c (m32r_load_section): Update.
* monitor.c (monitor_vsprintf, monitor_store_register): Update.
* remote.c (remote_check_symbols, remote_search_memory): Update.
* remote-mips.c (mips_request, mips_common_breakpoint): Update.
* scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
* sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
sh_dsp_show_regs): Update.
* xcoffsolib.c (sharedlibrary_command): Update.
* maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
Use hex_string_custom instead of paddr.
(print_bfd_section_info): Pass address size.
(print_objfile_section_info): Likewise.
* annotate.h (annotate_source): Add GDBARCH parameter.
(annotate_frame_begin): Likewise.
* annotate.c (annotate_source): Add GDBARCH parameter.
(annotate_frame_begin): Likewise.
* source.c (identify_source_line): Update call to annotate_source.
* stack.c (print_frame_info, print_frame): Update call to
annotate_frame_begin.
* breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
(create_breakpoint, create_ada_exception_breakpoint): Update call.
* stack.c (print_block_frame_labels): Add GDBARCH parameter.
(print_frame_label_vars): Update call.
* symmisc.c (print_partial_symbols): Add GDBARCH parameter.
(dump_psymtab): Update call to print_partial_symbols.
(struct print_symbol_args): Add GDBARCH member.
(dump_symtab_1): Set print_symbol_args architecture member.
(print_symbol): Use it.
* windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
parameter.
* windows-tdep.c (windows_xfer_shared_library): Likewise.
* i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
(core_process_module_section): Pass architecture from cpms_data to
windows_xfer_shared_library.
(windows_core_xfer_shared_libraries): Initialize cmps_data
architecture member.
* windows-nat.c (windows_xfer_shared_libraries): Pass architecture
to windows_xfer_shared_library.
* defs.h (print_address): Add GDBARCH parameter.
* printcmd.c (print_address): Add GDBARCH parameter.
(print_scalar_formatted, do_examine): Update call.
* findcmd.c (find_command): Update call.
* tracepoint.c: Include "arch-utils.h".
(trace_find_line_command): Update call.
* tui/tui-disasm.c (tui_disassemble): Update call.
* value.h (print_address_demangle): Add GDBARCH parameter.
* printcmd.c (print_address_demangle): Add GDBARCH parameter.
* c-valprint.c (print_function_pointer_address, c_val_print):
Update call.
* f-valprint.c (f_val_print): Update call.
* gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
* jv-valprint.c (java_val_print): Update call.
* m2-valprint.c (print_function_pointer_address, m2_val_print):
Update call.
* p-valprint.c (pascal_val_print): Update call.
* disasm.c (gdb_disassemble_info): Install architecture into
di.application_data field.
testsuite/ChangeLog:
* gdb.threads/tls-shared.exp: Update to locexpr_describe_location
change to prefix TLS offset in hex with 0x.
doc/ChangeLog:
* gdbint.texinfo (Item Output Functions): Update signature
for ui_out_field_core_addr.
uweigand [Thu, 2 Jul 2009 17:17:40 +0000 (17:17 +0000)]
* disasm.h (gdb_disassembly): Add GDBARCH parameter.
(gdb_print_insn): Likewise.
* disasm.c (dump_insns): Add GDBARCH parameter. Use it instead
of current_gdbarch.
(do_mixed_source_and_assembly): Add GDBARCH parameter. Pass to
dump_insns.
(do_assembly_only): Likewise.
(gdb_disassembly): Add GDBARCH parameter. Use it instead of
current_gdbarch. Pass to subroutines.
(gdb_print_insn): Add GDBARCH parameter. Use it instead of
current_gdbarch.
* stack.c (struct gdb_disassembly_stub_args): Add GDBARCH member.
(gdb_disassembly_stub): Pass architecture to gdb_disassembly.
(do_gdb_disassembly): Add GDBARCH argument. Store into args.
(print_frame_info): Pass architecture to do_gdb_disassembly.
* printcmd.c (print_formatted): Pass architecture to gdb_print_insn.
* mi/mi-cmd-disas.c: Include "arch-utils.h"
(mi_cmd_disassemble): Pass architecture to gdb_disassembly.
* cli/cli-cmds.c: Include "arch-utils.h".
(print_disassembly): Add GDBARCH parameter. Pass to gdb_disassembly
and tui_show_assembly.
(disassemble_current_function): Pass architecture to
tui_get_low_disassembly_address and print_disassembly.
(disassemble_command): Pass architecture to
tui_get_low_disassembly_address and print_disassembly.
* tui/tui.c (tui_show_assembly): Add GDBARCH parameter. Pass to
tui_update_source_windows_with_addr.
* tui/tui-data.h (struct tui_locator_element): Add GDBARCH member.
(struct tui_source_info): Likewise.
* tui/tui-data.c (tui_clear_win_detail): Clear source_info.gdbarch.
* tui/tui-disasm.c (tui_disassemble): Add GDBARCH parameter.
Pass to gdb_print_insn.
(tui_find_disassembly_address): Add GDBARCH parameter. Pass to
tui_disassemble.
(tui_set_disassem_content): Add GDBARCH parameter. Install into
source_info.gdbarch. Pass to tui_disassemble.
(tui_show_disassem): Add GDBARCH parameter. Pass to
tui_update_source_window.
(tui_show_disassem_and_update_source): Add GDBARCH parameter. Pass to
tui_show_disassem and tui_update_source_window.
(tui_get_begin_asm_address): Return locator architecture in addition
to locator PC value.
(tui_get_low_disassembly_address): Add GDBARCH parameter. Pass to
tui_get_low_disassembly_address.
(tui_vertical_disassem_scroll): Pass architecture to subroutines.
* tui/tui-disasm.h (tui_set_disassem_content): Add GDBARCH parameter.
(tui_show_disassem): Likewise.
(tui_show_disassem_and_update_source): Likewise.
(tui_get_begin_asm_address): Return architecture and PC value.
* tui/tui.h (tui_get_low_disassembly_address): Add GDBARCH parameter.
(tui_show_assembly): Add GDBARCH parameter.
* tui/tui-layout.c (extract_display_start_addr): Return current window
architecture in addition to current PC value.
(tui_set_layout): Update calls to tui_get_low_disassembly_address and
extract_display_start_addr. Pass architecture to
tui_update_source_windows_with_addr.
* tui/tui-source.c: Include "objfiles.h".
(tui_set_source_content): Initialize window architecture.
(tui_show_symtab_source): Add GDBARCH parameter. Pass to
tui_update_source_window_as_is
* tui/tui-source.h (tui_show_symtab_source): Add GDBARCH parameter.
* tui/tui-stack.c (tui_set_locator_info): Add GDBARCH parameter.
Install locator architecture.
(tui_set_locator_filename): Update call.
(tui_show_frame_info): Pass architecture to tui_set_locator_info
and subroutines.
* tui/tui-win.c (make_visible_with_new_height): Pass architecture
to tui_update_source_window.
* tui/tui-winsource.c: Include "objfiles.h".
(tui_display_main): Update call to tui_get_begin_asm_address.
Pass architecture to tui_update_source_windows_with_addr.
(tui_update_source_window): Add GDBARCH parameter. Pass to
tui_update_source_window_as_is.
(tui_update_source_window_as_is): Add GDBARCH parameter.
Pass to tui_set_disassem_content.
(tui_update_source_windows_with_addr): Add GDBARCH parameter.
Pass to subroutines.
(tui_update_source_windows_with_line): Pass objfile architecture
to subroutines.
(tui_horizontal_source_scroll): Pass architecture to
tui_update_source_window_as_is.
* tui/tui-winsource.h (tui_update_source_window): Add GDBARCH
parameter.
(tui_update_source_window_as_is): Likewise.
(tui_update_source_windows_with_addr): Likewise.
uweigand [Thu, 2 Jul 2009 17:12:21 +0000 (17:12 +0000)]
* breakpoint.h (struct breakpoint): New member GDBARCH.
* breakpoint.c: Include "arch-utils.h".
(set_raw_breakpoint_without_location): Add GDBARCH parameter.
Use it to set breakpoint architecture.
(set_raw_breakpoint): Add GDBARCH parameter.
(create_internal_breakpoint): Likewise.
(create_catchpoint): Likewise.
(create_fork_vfork_event_catchpoint): Likewise.
(create_breakpoint): Likewise.
(create_breakpoints): Likewise.
(break_command_really): Likewise.
(create_ada_exception_breakpoint): Likewise.
Update local callers to pass architecture:
(create_internal_breakpoint): Update.
(create_overlay_event_breakpoint): Update.
(create_longjmp_master_breakpoint): Update.
(create_thread_event_breakpoint): Update.
(create_solib_event_breakpoint): Update.
(create_catchpoint): Update.
(create_fork_vfork_event_catchpoint): Update.
(set_momentary_breakpoint): Update.
(clone_momentary_breakpoint): Update.
(create_breakpoint): Update.
(create_breakpoints): Update.
(break_command_really): Update.
(break_command_1): Update.
(set_breakpoint): Update.
(watch_command_1): Update.
(catch_fork_command_1): Update.
(catch_exec_commnd_1): Update.
(handle_gnu_v3_exceptions): Update.
(create_ada_exception_breakpoint): Update.
(catch_ada_exception_command): Update.
(catch_assert_command): Update.
(trace_command): Update.
* breakpoint.h (struct bp_location): New member GDBARCH.
* breakpoint.c (get_sal_arch): New function.
(set_raw_breakpoint): Set location architecture.
(add_location_to_breakpoint): Likewise.
(clone_momentary_breakpoint): Likewise.
(watch_command_1): Likewise.
(update_watchpoint): Likewise.
(bp_loc_is_permanent): Use location architecture instead of
current_gdbarch.
(adjust_breakpoint_address): Add GDBARCH parameter; use it
instead of current_gdbarch.
Update callers of adjust_breakpoint_address to pass
breakpoint location architecture:
(set_raw_breakpoint): Update.
(watch_command_1): Update.
* tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
of current_gdbarch.
(add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
(encode_actions): Pass tracepoint architecture to add_local_symbols
(encode_actions): Use tracepoint architecture instead of
current_gdbarch. Pass it to add_local_symbols and collect_symbol.
* breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
of print_one callback with last_loc.
* breakpoint.c (print_one_breakpoint_location): Replace last_addr
parameter with last_loc.
(print_one_breakpoint): Likewise.
(do_captured_breakpoint_query): Update call.
(breakpoint_1): Pass last_loc instead of last_addr to
print_one_breakpoint. Pass last location architecture instead of
current_gdbarch to set_next_address.
Update all implementations of the print_one callback:
* breakpoint.c (print_one_catch_fork): Update.
(print_one_catch_vfork): Update.
(print_one_catch_exec): Update.
(print_one_exception_catchpoint): Update.
* ada-lang.c (print_one_exception): Update.
(print_one_catch_exception): Update.
(print_one_catch_exception_unhandled): Update.
(print_one_catch_assert): Update.
* breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
(print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
to print_one_breakpoint_location.
(breakpoint_address_bits): New function.
(do_captured_breakpoint_query): Compute number of address bits to print
and pass it to print_one_breakpoint.
(breakpoint_1): Likewise. Use it instead of current_gdbarch.
* breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_thread_event_breakpoint): Likewise.
Update callers to create_thread_event_breakpoint:
* aix-thread.c (pd_enable): Update.
* linux-thread-db.c (enable_thread_event): Update.
* breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
* breakpoint.c (create_solib_event_breakpoint): Likewise.
Update callers to create_solib_event_breakpoint:
* solib-frv.c (enable_break, enable_break2): Update.
* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
* solib-som.c (som_solib_create_inferior_hook): Update.
* solib-darwin.c (darwin_solib_create_inferior_hook): Update.
* solib-svr4.c (enable_break): Update.
* breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
* breakpoint.c (insert_single_step_breakpoint): Likewise.
Update callers to insert_single_step_breakpoint:
* alpha-tdep.c (alpha_software_single_step): Update.
* arm-linux-tdep.c (arm_linux_software_single_step): Update.
* arm-tdep.c (arm_software_single_step): Update.
* cris-tdep.c (cris_software_single_step): Update.
* rs6000-aix-tdep.c (rs6000_software_single_step): Update.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
* sparc-tdep.c (sparc_software_single_step): Update.
* spu-tdep.c (spu_software_single_step): Update.
* mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
Pass it to insert_single_step_breakpoint.
(mips_software_single_step): Pass architecture to
deal_with_atomic_sequence and insert_single_step_breakpoint.
* breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
* breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
(deprecated_remove_raw_breakpoint): Likewise.
Update callers to deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint:
* breakpoint.c (single_step_gdbarch): New static variable.
(insert_single_step_breakpoint): Pass GDBARCH parameter to
deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
(remove_single_step_breakpoints): Pass architecture stored in
single_step_gdbarch to deprecated_remove_raw_breakpoint.
* rs6000-nat.c (exec_one_dummy_insn): Update.
* solib-irix.c (enable_break, disable_break): Update.
* procfs.c (procfs_mourn_inferior): Update.
(remove_dbx_link_breakpoint): Update.
* breakpoint.h (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
* breakpoint.c (set_breakpoint): Add GDBARCH parameter.
(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
Update callers to set_breakpoint, set_momentary_breakpoint and
set_momentary_breakpoint_at_pc:
* breakpoint.c (set_momentary_breakpoint_at_pc): Update.
(until_break_command): Update.
* infcall.c (call_function_by_hand): Update.
* infcmd.c (finish_backward, finish_forward): Update.
* infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
parameter. Pass it to set_momentary_breakpoint.
(insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
Pass it to set_momentary_breakpoint_at_pc.
(handle_inferior_event): Update.
(insert_step_resume_breakpoint_at_frame): Update.
(insert_step_resume_breakpoint_at_caller): Update..
* mi/mi-cmd-break.c: Include "arch-utils.h".
(mi_cmd_break_insert): Update.
* target.h (struct target_ops): Add GDBARCH parameter to
to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
and to_remove_hw_breakpoint members.
(target_insert_breakpoint, target_remove_breakpoint,
target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
parameter, pass to target routine.
(memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
parameter.
* target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
GDBARCH parameter, pass to target routine.
(update_current_target): Update function signature.
* breakpoint.c (insert_bp_location, remove_breakpoint,
deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
Pass architecture to target_ routines.
Update all implementations of the target breakpoint routines to take
GDBARCH parameter and use it instead of GDBARCH as appropriate:
* corelow.c (ignore): Update.
* exec.c (ignore): Update.
* mem-break.c (memory_insert_breakpoint): Update.
(memory_remove_breakpoint): Update.
* monitor.c (monitor_insert_breakpoint): Update.
(monitor_remove_breakpoint): Update.
* record.c (record_insert_breakpoint): Update.
(record_beneath_to_insert_breakpoint): Update.
(record_remove_breakpoint): Update.
(record_beneath_to_remove_breakpoint): Update.
* remote.c (remote_insert_breakpoint): Update.
(remote_remove_breakpoint): Update.
(remote_insert_hw_breakpoint): Update.
(remote_remove_hw_breakpoint): Update.
* remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
(m32r_remove_breakpoint): Update.
* remote-mips.c (mips_insert_breakpoint): Update.
(mips_remove_breakpoint): Update.
* i386-nat.c (i386_insert_hw_breakpoint): Update.
(i386_remove_hw_breakpoint): Update.
* nto-procfs.c (procfs_insert_breakpoint): Update.
(procfs_remove_breakpoint): Update.
(procfs_insert_hw_breakpoint): Update.
(procfs_remove_hw_breakpoint): Update.
doc/ChangeLog:
* gdbint.texi (Examples of Use of @code{ui_out} functions):
Update example code extrated from breakpoint.c.
uweigand [Thu, 2 Jul 2009 17:09:25 +0000 (17:09 +0000)]
* frame.h (frame_unwind_arch): New.
(frame_unwind_caller_arch): Likewise.
* frame-unwind.h (frame_prev_arch_ftype): New type.
(struct frame_unwind): New member prev_arch.
* frame.c (struct frame_info): New member prev_arch.
(frame_unwind_arch): New function.
(frame_unwind_caller_arch): Likewise..
(get_frame_arch): Reimplement in terms of frame_unwind_arch.
* sentinel-frame.c (sentinel_frame_prev_arch): New function.
(sentinel_frame_unwinder): Install it.
* frame.c (frame_pc_unwind): Use frame_unwind_arch instead
of get_frame_arch.
(frame_unwind_register_value): Likewise.
(frame_unwind_register_signed): Likewise.
(frame_unwind_register_unsigned): Likewise.
* frame-unwind.c (frame_unwind_got_optimized): Likewise.
(frame_unwind_got_register): Likewise.
(frame_unwind_got_constant): Likewise.
(frame_unwind_got_bytes): Likewise.
(frame_unwind_got_address): Likewise.
* frame.h (enum frame_type): New value ARCH_FRAME.
* frame.c (fprint_frame_type): Handle ARCH_FRAME.
* stack.c (print_frame_info): Likewise.
tromey [Thu, 2 Jul 2009 17:08:50 +0000 (17:08 +0000)]
* aoutx.h (aout_get_external_symbols): Declare 'amt' locally.
* bfdwin.c (bfd_free_window): Cast to unsigned long.
uweigand [Thu, 2 Jul 2009 17:06:42 +0000 (17:06 +0000)]
* target.h (struct target_ops): New member to_thread_architecture.
(target_thread_architecture): New macro.
* target.c (update_current_target): Inherit to_thread_architecture.
(default_thread_architecture): New function.
(debug_to_thread_architecture): New function.
(setup_target_debug): Handle to_thread_architecture.
* regcache.h (get_thread_arch_regcache): New.
* regcache.c (struct regcache_list): New data type.
(current_regcache): Hold regcache list instead of single regcache.
(current_thread_ptid, current_thread_arch): New static variables.
(get_thread_arch_regcache): New function.
(get_thread_regcache): Use it. Call target_thread_architecture.
(regcache_thread_ptid_changed): Update to current_regcache changes.
(registers_changed): Likewise. Reset current_thread_arch and
current_thread_ptid.
* remote.c (remote_wait): Access target registers in target_gdbarch.
* linux-nat.c (linux_nat_do_thread_registers): Likewise.
* proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
* sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
* solib-svr4.c (enable_break): Likewise.
(svr4_relocate_main_executable): Likewise.
uweigand [Thu, 2 Jul 2009 17:04:17 +0000 (17:04 +0000)]
* python/python-internal.h (struct language_defn): Declare.
(python_gdbarch, python_language): Likewise.
(ensure_python_env): Add prototype.
(make_cleanup_py_restore_gil): Remove prototype.
* python/python.c: Include "arch-utils.h", "value.h" and "language.h".
(python_gdbarch, python_language): New global variables.
(struct python_env): New data type.
(ensure_python_env, restore_python_env): New functions.
(eval_python_from_control_command): Call ensure_python_env to
install current architecture and language.
(python_command, gdbpy_new_objfile): Likewise.
* python/python-cmd.c: Include "arch-utils.h" and "language.h".
(cmdpy_destroyer, cmdpy_function, cmdpy_completer): Call
ensure_python_env.
* python/python-type.c (clean_up_objfile_types): Likewise.
* python/python-objfile.c: Include "language.h".
(clean_up_objfile): Call ensure_python_env.
* python/python-prettyprint.c (apply_val_pretty_printer): Likewise.
(apply_varobj_pretty_printer): Do not call PyGILState_Ensure.
* varobj.c (varobj_ensure_python_env): New helper function.
(varobj_get_display_hint, update_dynamic_varobj_children,
install_default_visualizer, varobj_set_visualizer, free_variable,
value_get_print_value): Call it.
(value_get_print_value): Add varobj argument instead of pretty
printer argument. Update all callers.
* python/python-utils.c (py_gil_restore, make_cleanup_py_restore_gil):
Remove.
* value.h (internal_function_fn): Add GDBARCH and LANGUAGE argument.
(call_internal_function): Likewise.
* value.c (call_internal_function): Likewise. Pass to handler.
* eval.c (evaluate_subexp_standard): Update call.
* python/python-function.c: Include "language.h".
(fnpy_call): Add GDBARCH and LANGAUAGE arguments and call
make_cleanup_python_env.
* python/python-value.c (builtin_type_pyint, builtin_type_pyfloat,
builtin_type_pylong, builtin_type_pybool, builtin_type_pychar,
valpy_str): Use python_gdbarch and python_language instead of
current_gdbarch and current_language.
* python/python-type.c (typy_lookup_typename): Likewise.
uweigand [Thu, 2 Jul 2009 17:02:29 +0000 (17:02 +0000)]
* arch-utils.c (selected_byte_order): Return target_byte_order_user.
(show_endian): Use target_byte_order_user if specified; otherwise
use get_current_arch () instead of current_gdbarch.
(show_architecture): Use set_architecture_string if specified;
otherwise use get_current_arch () instead of current_gdbarch.
(get_current_arch): New function.
* arch-utils.h (get_current_arch): Add prototype.
* osabi.c (show_osabi): Use get_current_arch () instead of
current_gdbarch.
* findcmd.c: Include "arch-utils.h".
(parse_find_args): Add BIG_P argument. Use it instead of byte order
of current_gdbarch.
(find_command): Use get_current_arch () instead of current_gdbarch.
Pass byte order to parse_find_args.
* maint.c: Include "arch-utils.h".
(maintenance_print_architecture): Use get_current_arch () instead
of current_gdbarch.
* reggroups.c: Include "arch-utils.h".
(maintenance_print_reggroups): Use get_current_arch () instead
of current_gdbarch.
* symfile.c: Include "arch-utils.h".
(overlay_load_command): Use get_current_arch () instead of
current_gdbarch.
* value.c: Include "arch-utils.h".
(show_convenience): Use get_current_arch () instead of
current_gdbarch.
* tui/tui-regs.c: Include "arch-utils.h".
(tui_reg_next_command): Use get_current_arch () instead of
current_gdbarch.
* mi/mi-main.c: Include "arch-utils.h".
(mi_cmd_data_read_memory): Use get_current_arch () instead of
current_gdbarch.
* parse.c: Include "arch-utils.h".
(parse_exp_in_context): Use get_current_arch () instead of
current_gdbarch.