OSDN Git Service
Paolo Bonzini [Fri, 22 Oct 2021 10:50:06 +0000 (06:50 -0400)]
KVM: x86: inline kernel_pio into its sole caller
The caller of kernel_pio already has arguments for most of what kernel_pio
fishes out of vcpu->arch.pio. This is the first step towards ensuring that
vcpu->arch.pio.* is only used when exiting to userspace.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 15 Jun 2022 17:32:29 +0000 (13:32 -0400)]
KVM: x86: complete fast IN directly with complete_emulator_pio_in()
Use complete_emulator_pio_in() directly when completing fast PIO, there's
no need to bounce through emulator_pio_in(): the comment about ECX
changing doesn't apply to fast PIO, which isn't used for string I/O.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Thu, 19 May 2022 10:27:09 +0000 (05:27 -0500)]
KVM: x86: nSVM: optimize svm_set_x2apic_msr_interception
- Avoid toggling the x2apic msr interception if it is already up to date.
- Avoid touching L0 msr bitmap when AVIC is inhibited on entry to
the guest mode, because in this case the guest usually uses its
own msr bitmap.
Later on VM exit, the 1st optimization will allow KVM to skip
touching the L0 msr bitmap as well.
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20220519102709.24125-18-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:27:08 +0000 (05:27 -0500)]
KVM: SVM: Add AVIC doorbell tracepoint
Add a tracepoint to track number of doorbells being sent
to signal a running vCPU to process IRQ after being injected.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
20220519102709.24125-17-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:27:07 +0000 (05:27 -0500)]
KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible
For x2AVIC, the index from incomplete IPI #vmexit info is invalid
for logical cluster mode. Only ICRH/ICRL values can be used
to determine the IPI destination APIC ID.
Since QEMU defines guest physical APIC ID to be the same as
vCPU ID, it can be used to quickly identify the target vCPU to deliver IPI,
and avoid the overhead from searching through all vCPUs to match the target
vCPU.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
20220519102709.24125-16-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:27:06 +0000 (05:27 -0500)]
KVM: x86: Warning APICv inconsistency only when vcpu APIC mode is valid
When launching a VM with x2APIC and specify more than 255 vCPUs,
the guest kernel can disable x2APIC (e.g. specify nox2apic kernel option).
The VM fallbacks to xAPIC mode, and disable the vCPU ID 255 and greater.
In this case, APICV is deactivated for the disabled vCPUs.
However, the current APICv consistency warning does not account for
this case, which results in a warning.
Therefore, modify warning logic to report only when vCPU APIC mode
is valid.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
20220519102709.24125-15-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:27:05 +0000 (05:27 -0500)]
KVM: SVM: Introduce hybrid-AVIC mode
Currently, AVIC is inhibited when booting a VM w/ x2APIC support.
because AVIC cannot virtualize x2APIC MSR register accesses.
However, the AVIC doorbell can be used to accelerate interrupt
injection into a running vCPU, while all guest accesses to x2APIC MSRs
will be intercepted and emulated by KVM.
With hybrid-AVIC support, the APICV_INHIBIT_REASON_X2APIC is
no longer enforced.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
20220519102709.24125-14-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:27:04 +0000 (05:27 -0500)]
KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu
Originalliy, this WARN_ON is designed to detect when calling
avic_vcpu_load() on an already running vcpu in AVIC mode (i.e. the AVIC
is_running bit is set).
However, for x2AVIC, the vCPU can switch from xAPIC to x2APIC mode while in
running state, in which the avic_vcpu_load() will be called from
svm_refresh_apicv_exec_ctrl().
Therefore, remove this warning since it is no longer appropriate.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
20220519102709.24125-13-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:27:03 +0000 (05:27 -0500)]
KVM: SVM: Introduce logic to (de)activate x2AVIC mode
Introduce logic to (de)activate AVIC, which also allows
switching between AVIC to x2AVIC mode at runtime.
When an AVIC-enabled guest switches from APIC to x2APIC mode,
the SVM driver needs to perform the following steps:
1. Set the x2APIC mode bit for AVIC in VMCB along with the maximum
APIC ID support for each mode accodingly.
2. Disable x2APIC MSRs interception in order to allow the hardware
to virtualize x2APIC MSRs accesses.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
20220519102709.24125-12-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Thu, 19 May 2022 10:27:02 +0000 (05:27 -0500)]
KVM: x86: nSVM: always intercept x2apic msrs
As a preparation for x2avic, this patch ensures that x2apic msrs
are always intercepted for the nested guest.
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20220519102709.24125-11-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:27:01 +0000 (05:27 -0500)]
KVM: SVM: Refresh AVIC configuration when changing APIC mode
AMD AVIC can support xAPIC and x2APIC virtualization,
which requires changing x2APIC bit VMCB and MSR intercepton
for x2APIC MSRs. Therefore, call avic_refresh_apicv_exec_ctrl()
to refresh configuration accordingly.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
20220519102709.24125-10-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:27:00 +0000 (05:27 -0500)]
KVM: x86: Deactivate APICv on vCPU with APIC disabled
APICv should be deactivated on vCPU that has APIC disabled.
Therefore, call kvm_vcpu_update_apicv() when changing
APIC mode, and add additional check for APIC disable mode
when determine APICV activation,
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
20220519102709.24125-9-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:26:59 +0000 (05:26 -0500)]
KVM: SVM: Adding support for configuring x2APIC MSRs interception
When enabling x2APIC virtualization (x2AVIC), the interception of
x2APIC MSRs must be disabled to let the hardware virtualize guest
MSR accesses.
Current implementation keeps track of list of MSR interception state
in the svm_direct_access_msrs array. Therefore, extends the array to
include x2APIC MSRs.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
20220519102709.24125-8-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:26:58 +0000 (05:26 -0500)]
KVM: SVM: Do not support updating APIC ID when in x2APIC mode
In X2APIC mode, the Logical Destination Register is read-only,
which provides a fixed mapping between the logical and physical
APIC IDs. Therefore, there is no Logical APIC ID table in X2AVIC
and the processor uses the X2APIC ID in the backing page to create
a vCPU’s logical ID.
In addition, KVM does not support updating APIC ID in x2APIC mode,
which means AVIC does not need to handle this case.
Therefore, check x2APIC mode when handling physical and logical
APIC ID update, and when invalidating logical APIC ID table.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
20220519102709.24125-7-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:26:57 +0000 (05:26 -0500)]
KVM: SVM: Update avic_kick_target_vcpus to support 32-bit APIC ID
In x2APIC mode, ICRH contains 32-bit destination APIC ID.
So, update the avic_kick_target_vcpus() accordingly.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
20220519102709.24125-6-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:26:56 +0000 (05:26 -0500)]
KVM: SVM: Update max number of vCPUs supported for x2AVIC mode
xAVIC and x2AVIC modes can support diffferent number of vcpus.
Update existing logics to support each mode accordingly.
Also, modify the maximum physical APIC ID for AVIC to 255 to reflect
the actual value supported by the architecture.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
20220519102709.24125-5-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:26:55 +0000 (05:26 -0500)]
KVM: SVM: Detect X2APIC virtualization (x2AVIC) support
Add CPUID check for the x2APIC virtualization (x2AVIC) feature.
If available, the SVM driver can support both AVIC and x2AVIC modes
when load the kvm_amd driver with avic=1. The operating mode will be
determined at runtime depending on the guest APIC mode.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <
20220519102709.24125-4-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:26:54 +0000 (05:26 -0500)]
KVM: x86: lapic: Rename [GET/SET]_APIC_DEST_FIELD to [GET/SET]_XAPIC_DEST_FIELD
To signify that the macros only support 8-bit xAPIC destination ID.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220519102709.24125-3-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Thu, 19 May 2022 10:26:53 +0000 (05:26 -0500)]
x86/cpufeatures: Introduce x2AVIC CPUID bit
Introduce a new feature bit for virtualized x2APIC (x2AVIC) in
CPUID_Fn8000000A_EDX [SVM Revision and Feature Identification].
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220519102709.24125-2-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vineeth Pillai [Mon, 23 May 2022 19:03:27 +0000 (15:03 -0400)]
KVM: debugfs: expose pid of vcpu threads
Add a new debugfs file to expose the pid of each vcpu threads. This
is very helpful for userland tools to get the vcpu pids without
worrying about thread naming conventions of the VMM.
Signed-off-by: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Message-Id: <
20220523190327.2658-1-vineeth@bitbyteword.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 24 Jun 2022 15:45:45 +0000 (11:45 -0400)]
KVM: nVMX: clean up posted interrupt descriptor try_cmpxchg
Rely on try_cmpxchg64 for re-reading the PID on failure, using READ_ONCE
only right before the first iteration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zeng Guang [Thu, 23 Jun 2022 09:45:11 +0000 (17:45 +0800)]
KVM: selftests: Enhance handling WRMSR ICR register in x2APIC mode
Hardware would directly write x2APIC ICR register instead of software
emulation in some circumstances, e.g when Intel IPI virtualization is
enabled. This behavior requires normal reserved bits checking to ensure
them input as zero, otherwise it will cause #GP. So we need mask out
those reserved bits from the data written to vICR register.
Remove Delivery Status bit emulation in test case as this flag
is invalid and not needed in x2APIC mode. KVM may ignore clearing
it during interrupt dispatch which will lead to fake test failure.
Opportunistically correct vector number for test sending IPI to
non-existent vCPUs.
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <
20220623094511.26066-1-guang.zeng@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:34 +0000 (10:11 -0700)]
KVM: selftests: Add a self test for CMCI and UCNA emulations.
This patch add a self test that verifies user space can inject
UnCorrectable No Action required (UCNA) memory errors to the guest.
It also verifies that incorrectly configured MSRs for Corrected
Machine Check Interrupt (CMCI) emulation will result in #GP.
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220610171134.772566-9-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:33 +0000 (10:11 -0700)]
KVM: x86: Enable CMCI capability by default and handle injected UCNA errors
This patch enables MCG_CMCI_P by default in kvm_mce_cap_supported. It
reuses ioctl KVM_X86_SET_MCE to implement injection of UnCorrectable
No Action required (UCNA) errors, signaled via Corrected Machine
Check Interrupt (CMCI).
Neither of the CMCI and UCNA emulations depends on hardware.
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220610171134.772566-8-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:32 +0000 (10:11 -0700)]
KVM: x86: Add emulation for MSR_IA32_MCx_CTL2 MSRs.
This patch adds the emulation of IA32_MCi_CTL2 registers to KVM. A
separate mci_ctl2_banks array is used to keep the existing mce_banks
register layout intact.
In Machine Check Architecture, in addition to MCG_CMCI_P, bit 30 of
the per-bank register IA32_MCi_CTL2 controls whether Corrected Machine
Check error reporting is enabled.
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220610171134.772566-7-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:31 +0000 (10:11 -0700)]
KVM: x86: Use kcalloc to allocate the mce_banks array.
This patch updates the allocation of mce_banks with the array allocation
API (kcalloc) as a precedent for the later mci_ctl2_banks to implement
per-bank control of Corrected Machine Check Interrupt (CMCI).
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220610171134.772566-6-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:30 +0000 (10:11 -0700)]
KVM: x86: Add Corrected Machine Check Interrupt (CMCI) emulation to lapic.
This patch calculates the number of lvt entries as part of
KVM_X86_MCE_SETUP conditioned on the presence of MCG_CMCI_P bit in
MCG_CAP and stores result in kvm_lapic. It translats from APIC_LVTx
register to index in lapic_lvt_entry enum. It extends the APIC_LVTx
macro as well as other lapic write/reset handling etc to support
Corrected Machine Check Interrupt.
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220610171134.772566-5-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:29 +0000 (10:11 -0700)]
KVM: x86: Add APIC_LVTx() macro.
An APIC_LVTx macro is introduced to calcualte the APIC_LVTx register
offset based on the index in the lapic_lvt_entry enum. Later patches
will extend the APIC_LVTx macro to support the APIC_LVTCMCI register
in order to implement Corrected Machine Check Interrupt signaling.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220610171134.772566-4-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:28 +0000 (10:11 -0700)]
KVM: x86: Fill apic_lvt_mask with enums / explicit entries.
This patch defines a lapic_lvt_entry enum used as explicit indices to
the apic_lvt_mask array. In later patches a LVT_CMCI will be added to
implement the Corrected Machine Check Interrupt signaling.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220610171134.772566-3-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:27 +0000 (10:11 -0700)]
KVM: x86: Make APIC_VERSION capture only the magic 0x14UL.
Refactor APIC_VERSION so that the maximum number of LVT entries is
inserted at runtime rather than compile time. This will be used in a
subsequent commit to expose the LVT CMCI Register to VMs that support
Corrected Machine Check error counting/signaling
(IA32_MCG_CAP.MCG_CMCI_P=1).
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20220610171134.772566-2-juew@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 22 Jun 2022 19:27:10 +0000 (15:27 -0400)]
KVM: x86/mmu: Avoid unnecessary flush on eager page split
The TLB flush before installing the newly-populated lower level
page table is unnecessary if the lower-level page table maps
the huge page identically. KVM knows it is if it did not reuse
an existing shadow page table, tell drop_large_spte() to skip
the flush in that case.
Extracted from a patch by David Matlack.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:09 +0000 (15:27 -0400)]
KVM: x86/mmu: Extend Eager Page Splitting to nested MMUs
Add support for Eager Page Splitting pages that are mapped by nested
MMUs. Walk through the rmap first splitting all 1GiB pages to 2MiB
pages, and then splitting all 2MiB pages to 4KiB pages.
Note, Eager Page Splitting is limited to nested MMUs as a policy rather
than due to any technical reason (the sp->role.guest_mode check could
just be deleted and Eager Page Splitting would work correctly for all
shadow MMU pages). There is really no reason to support Eager Page
Splitting for tdp_mmu=N, since such support will eventually be phased
out, and there is no current use case supporting Eager Page Splitting on
hosts where TDP is either disabled or unavailable in hardware.
Furthermore, future improvements to nested MMU scalability may diverge
the code from the legacy shadow paging implementation. These
improvements will be simpler to make if Eager Page Splitting does not
have to worry about legacy shadow paging.
Splitting huge pages mapped by nested MMUs requires dealing with some
extra complexity beyond that of the TDP MMU:
(1) The shadow MMU has a limit on the number of shadow pages that are
allowed to be allocated. So, as a policy, Eager Page Splitting
refuses to split if there are KVM_MIN_FREE_MMU_PAGES or fewer
pages available.
(2) Splitting a huge page may end up re-using an existing lower level
shadow page tables. This is unlike the TDP MMU which always allocates
new shadow page tables when splitting.
(3) When installing the lower level SPTEs, they must be added to the
rmap which may require allocating additional pte_list_desc structs.
Case (2) is especially interesting since it may require a TLB flush,
unlike the TDP MMU which can fully split huge pages without any TLB
flushes. Specifically, an existing lower level page table may point to
even lower level page tables that are not fully populated, effectively
unmapping a portion of the huge page, which requires a flush. As of
this commit, a flush is always done always after dropping the huge page
and before installing the lower level page table.
This TLB flush could instead be delayed until the MMU lock is about to be
dropped, which would batch flushes for multiple splits. However these
flushes should be rare in practice (a huge page must be aliased in
multiple SPTEs and have been split for NX Huge Pages in only some of
them). Flushing immediately is simpler to plumb and also reduces the
chances of tripping over a CPU bug (e.g. see iTLB multihit).
[ This commit is based off of the original implementation of Eager Page
Splitting from Peter in Google's kernel from 2016. ]
Suggested-by: Peter Feiner <pfeiner@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-23-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:08 +0000 (15:27 -0400)]
KVM: Allow for different capacities in kvm_mmu_memory_cache structs
Allow the capacity of the kvm_mmu_memory_cache struct to be chosen at
declaration time rather than being fixed for all declarations. This will
be used in a follow-up commit to declare an cache in x86 with a capacity
of 512+ objects without having to increase the capacity of all caches in
KVM.
This change requires each cache now specify its capacity at runtime,
since the cache struct itself no longer has a fixed capacity known at
compile time. To protect against someone accidentally defining a
kvm_mmu_memory_cache struct directly (without the extra storage), this
commit includes a WARN_ON() in kvm_mmu_topup_memory_cache().
In order to support different capacities, this commit changes the
objects pointer array to be dynamically allocated the first time the
cache is topped-up.
While here, opportunistically clean up the stack-allocated
kvm_mmu_memory_cache structs in riscv and arm64 to use designated
initializers.
No functional change intended.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-22-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 22 Jun 2022 19:27:07 +0000 (15:27 -0400)]
KVM: x86/mmu: pull call to drop_large_spte() into __link_shadow_page()
Before allocating a child shadow page table, all callers check
whether the parent already points to a huge page and, if so, they
drop that SPTE. This is done by drop_large_spte().
However, dropping the large SPTE is really only necessary before the
sp is installed. While the sp is returned by kvm_mmu_get_child_sp(),
installing it happens later in __link_shadow_page(). Move the call
there instead of having it in each and every caller.
To ensure that the shadow page is not linked twice if it was present,
do _not_ opportunistically make kvm_mmu_get_child_sp() idempotent:
instead, return an error value if the shadow page already existed.
This is a bit more verbose, but clearer than NULL.
Finally, now that the drop_large_spte() name is not taken anymore,
remove the two underscores in front of __drop_large_spte().
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:06 +0000 (15:27 -0400)]
KVM: x86/mmu: Zap collapsible SPTEs in shadow MMU at all possible levels
Currently KVM only zaps collapsible 4KiB SPTEs in the shadow MMU. This
is fine for now since KVM never creates intermediate huge pages during
dirty logging. In other words, KVM always replaces 1GiB pages directly
with 4KiB pages, so there is no reason to look for collapsible 2MiB
pages.
However, this will stop being true once the shadow MMU participates in
eager page splitting. During eager page splitting, each 1GiB is first
split into 2MiB pages and then those are split into 4KiB pages. The
intermediate 2MiB pages may be left behind if an error condition causes
eager page splitting to bail early.
No functional change intended.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-20-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:05 +0000 (15:27 -0400)]
KVM: x86/mmu: Extend make_huge_page_split_spte() for the shadow MMU
Currently make_huge_page_split_spte() assumes execute permissions can be
granted to any 4K SPTE when splitting huge pages. This is true for the
TDP MMU but is not necessarily true for the shadow MMU, since KVM may be
shadowing a non-executable huge page.
To fix this, pass in the role of the child shadow page where the huge
page will be split and derive the execution permission from that. This
is correct because huge pages are always split with direct shadow page
and thus the shadow page role contains the correct access permissions.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-19-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:04 +0000 (15:27 -0400)]
KVM: x86/mmu: Cache the access bits of shadowed translations
Splitting huge pages requires allocating/finding shadow pages to replace
the huge page. Shadow pages are keyed, in part, off the guest access
permissions they are shadowing. For fully direct MMUs, there is no
shadowing so the access bits in the shadow page role are always ACC_ALL.
But during shadow paging, the guest can enforce whatever access
permissions it wants.
In particular, eager page splitting needs to know the permissions to use
for the subpages, but KVM cannot retrieve them from the guest page
tables because eager page splitting does not have a vCPU. Fortunately,
the guest access permissions are easy to cache whenever page faults or
FNAME(sync_page) update the shadow page tables; this is an extension of
the existing cache of the shadowed GFNs in the gfns array of the shadow
page. The access bits only take up 3 bits, which leaves 61 bits left
over for gfns, which is more than enough.
Now that the gfns array caches more information than just GFNs, rename
it to shadowed_translation.
While here, preemptively fix up the WARN_ON() that detects gfn
mismatches in direct SPs. The WARN_ON() was paired with a
pr_err_ratelimited(), which means that users could sometimes see the
WARN without the accompanying error message. Fix this by outputting the
error message as part of the WARN splat, and opportunistically make
them WARN_ONCE() because if these ever fire, they are all but guaranteed
to fire a lot and will bring down the kernel.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-18-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:03 +0000 (15:27 -0400)]
KVM: x86/mmu: Update page stats in __rmap_add()
Update the page stats in __rmap_add() rather than at the call site. This
will avoid having to manually update page stats when splitting huge
pages in a subsequent commit.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-17-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:02 +0000 (15:27 -0400)]
KVM: x86/mmu: Decouple rmap_add() and link_shadow_page() from kvm_vcpu
Allow adding new entries to the rmap and linking shadow pages without a
struct kvm_vcpu pointer by moving the implementation of rmap_add() and
link_shadow_page() into inner helper functions.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-16-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:01 +0000 (15:27 -0400)]
KVM: x86/mmu: Pass const memslot to rmap_add()
Constify rmap_add()'s @slot parameter; it is simply passed on to
gfn_to_rmap(), which takes a const memslot.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-15-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:00 +0000 (15:27 -0400)]
KVM: x86/mmu: Allow NULL @vcpu in kvm_mmu_find_shadow_page()
Allow @vcpu to be NULL in kvm_mmu_find_shadow_page() (and its only
caller __kvm_mmu_get_shadow_page()). @vcpu is only required to sync
indirect shadow pages, so it's safe to pass in NULL when looking up
direct shadow pages.
This will be used for doing eager page splitting, which allocates direct
shadow pages from the context of a VM ioctl without access to a vCPU
pointer.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-14-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:26:59 +0000 (15:26 -0400)]
KVM: x86/mmu: Pass kvm pointer separately from vcpu to kvm_mmu_find_shadow_page()
Get the kvm pointer from the caller, rather than deriving it from
vcpu->kvm, and plumb the kvm pointer all the way from
kvm_mmu_get_shadow_page(). With this change in place, the vcpu pointer
is only needed to sync indirect shadow pages. In other words,
__kvm_mmu_get_shadow_page() can now be used to get *direct* shadow pages
without a vcpu pointer. This enables eager page splitting, which needs
to allocate direct shadow pages during VM ioctls.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-13-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:26:58 +0000 (15:26 -0400)]
KVM: x86/mmu: Replace vcpu with kvm in kvm_mmu_alloc_shadow_page()
The vcpu pointer in kvm_mmu_alloc_shadow_page() is only used to get the
kvm pointer. So drop the vcpu pointer and just pass in the kvm pointer.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-12-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:26:57 +0000 (15:26 -0400)]
KVM: x86/mmu: Pass memory caches to allocate SPs separately
Refactor kvm_mmu_alloc_shadow_page() to receive the caches from which it
will allocate the various pieces of memory for shadow pages as a
parameter, rather than deriving them from the vcpu pointer. This will be
useful in a future commit where shadow pages are allocated during VM
ioctls for eager page splitting, and thus will use a different set of
caches.
Preemptively pull the caches out all the way to
kvm_mmu_get_shadow_page() since eager page splitting will not be calling
kvm_mmu_alloc_shadow_page() directly.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-11-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:26:56 +0000 (15:26 -0400)]
KVM: x86/mmu: Move guest PT write-protection to account_shadowed()
Move the code that write-protects newly-shadowed guest page tables into
account_shadowed(). This avoids a extra gfn-to-memslot lookup and is a
more logical place for this code to live. But most importantly, this
reduces kvm_mmu_alloc_shadow_page()'s reliance on having a struct
kvm_vcpu pointer, which will be necessary when creating new shadow pages
during VM ioctls for eager page splitting.
Note, it is safe to drop the role.level == PG_LEVEL_4K check since
account_shadowed() returns early if role.level > PG_LEVEL_4K.
No functional change intended.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-10-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:26:55 +0000 (15:26 -0400)]
KVM: x86/mmu: Rename shadow MMU functions that deal with shadow pages
Rename 2 functions:
kvm_mmu_get_page() -> kvm_mmu_get_shadow_page()
kvm_mmu_free_page() -> kvm_mmu_free_shadow_page()
This change makes it clear that these functions deal with shadow pages
rather than struct pages. It also aligns these functions with the naming
scheme for kvm_mmu_find_shadow_page() and kvm_mmu_alloc_shadow_page().
Prefer "shadow_page" over the shorter "sp" since these are core
functions and the line lengths aren't terrible.
No functional change intended.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-9-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:26:54 +0000 (15:26 -0400)]
KVM: x86/mmu: Consolidate shadow page allocation and initialization
Consolidate kvm_mmu_alloc_page() and kvm_mmu_alloc_shadow_page() under
the latter so that all shadow page allocation and initialization happens
in one place.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-8-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:26:53 +0000 (15:26 -0400)]
KVM: x86/mmu: Decompose kvm_mmu_get_page() into separate functions
Decompose kvm_mmu_get_page() into separate helper functions to increase
readability and prepare for allocating shadow pages without a vcpu
pointer.
Specifically, pull the guts of kvm_mmu_get_page() into 2 helper
functions:
kvm_mmu_find_shadow_page() -
Walks the page hash checking for any existing mmu pages that match the
given gfn and role.
kvm_mmu_alloc_shadow_page()
Allocates and initializes an entirely new kvm_mmu_page. This currently
requries a vcpu pointer for allocation and looking up the memslot but
that will be removed in a future commit.
No functional change intended.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-7-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:26:52 +0000 (15:26 -0400)]
KVM: x86/mmu: Always pass 0 for @quadrant when gptes are 8 bytes
The quadrant is only used when gptes are 4 bytes, but
mmu_alloc_{direct,shadow}_roots() pass in a non-zero quadrant for PAE
page directories regardless. Make this less confusing by only passing in
a non-zero quadrant when it is actually necessary.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-6-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:26:51 +0000 (15:26 -0400)]
KVM: x86/mmu: Derive shadow MMU page role from parent
Instead of computing the shadow page role from scratch for every new
page, derive most of the information from the parent shadow page. This
eliminates the dependency on the vCPU root role to allocate shadow page
tables, and reduces the number of parameters to kvm_mmu_get_page().
Preemptively split out the role calculation to a separate function for
use in a following commit.
Note that when calculating the MMU root role, we can take
@role.passthrough, @role.direct, and @role.access directly from
@vcpu->arch.mmu->root_role. Only @role.level and @role.quadrant still
must be overridden for PAE page directories, when shadowing 32-bit
guest page tables with PAE page tables.
No functional change intended.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-5-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:26:50 +0000 (15:26 -0400)]
KVM: x86/mmu: Stop passing "direct" to mmu_alloc_root()
The "direct" argument is vcpu->arch.mmu->root_role.direct,
because unlike non-root page tables, it's impossible to have
a direct root in an indirect MMU. So just use that.
Suggested-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:26:49 +0000 (15:26 -0400)]
KVM: x86/mmu: Use a bool for direct
The parameter "direct" can either be true or false, and all of the
callers pass in a bool variable or true/false literal, so just use the
type bool.
No functional change intended.
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:26:48 +0000 (15:26 -0400)]
KVM: x86/mmu: Optimize MMU page cache lookup for all direct SPs
Commit
fb58a9c345f6 ("KVM: x86/mmu: Optimize MMU page cache lookup for
fully direct MMUs") skipped the unsync checks and write flood clearing
for full direct MMUs. We can extend this further to skip the checks for
all direct shadow pages. Direct shadow pages in indirect MMUs (i.e.
shadow paging) are used when shadowing a guest huge page with smaller
pages. Such direct shadow pages, like their counterparts in fully direct
MMUs, are never marked unsynced or have a non-zero write-flooding count.
Checking sp->role.direct also generates better code than checking
direct_map because, due to register pressure, direct_map has to get
shoved onto the stack and then pulled back off.
No functional change intended.
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <
20220516232138.
1783324-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Mon, 13 Jun 2022 21:25:23 +0000 (21:25 +0000)]
KVM: selftests: Cache binary stats metadata for duration of test
In order to improve performance across multiple reads of VM stats, cache
the stats metadata in the VM struct.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <
20220613212523.
3436117-11-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Mon, 13 Jun 2022 21:25:22 +0000 (21:25 +0000)]
KVM: selftests: Test disabling NX hugepages on a VM
Add an argument to the NX huge pages test to test disabling the feature
on a VM using the new capability.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <
20220613212523.
3436117-10-bgardon@google.com>
[Handle failure of sudo or setcap more gracefully. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Mon, 13 Jun 2022 21:25:19 +0000 (21:25 +0000)]
KVM: selftests: Add NX huge pages test
There's currently no test coverage of NX hugepages in KVM selftests, so
add a basic test to ensure that the feature works as intended.
The test creates a VM with a data slot backed with huge pages. The
memory in the data slot is filled with op-codes for the return
instruction. The guest then executes a series of accesses on the memory,
some reads, some instruction fetches. After each operation, the guest
exits and the test performs some checks on the backing page counts to
ensure that NX page splitting an reclaim work as expected.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <
20220613212523.
3436117-7-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Mon, 13 Jun 2022 21:25:21 +0000 (21:25 +0000)]
KVM: x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
In some cases, the NX hugepage mitigation for iTLB multihit is not
needed for all guests on a host. Allow disabling the mitigation on a
per-VM basis to avoid the performance hit of NX hugepages on trusted
workloads.
In order to disable NX hugepages on a VM, ensure that the userspace
actor has permission to reboot the system. Since disabling NX hugepages
would allow a guest to crash the system, it is similar to reboot
permissions.
Ideally, KVM would require userspace to prove it has access to KVM's
nx_huge_pages module param, e.g. so that userspace can opt out without
needing full reboot permissions. But getting access to the module param
file info is difficult because it is buried in layers of sysfs and module
glue. Requiring CAP_SYS_BOOT is sufficient for all known use cases.
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <
20220613212523.
3436117-9-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Mon, 13 Jun 2022 21:25:20 +0000 (21:25 +0000)]
KVM: x86: Fix errant brace in KVM capability handling
The braces around the KVM_CAP_XSAVE2 block also surround the
KVM_CAP_PMU_CAPABILITY block, likely the result of a merge issue. Simply
move the curly brace back to where it belongs.
Fixes:
ba7bb663f5547 ("KVM: x86: Provide per VM capability for disabling PMU virtualization")
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <
20220613212523.
3436117-8-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Mon, 13 Jun 2022 21:25:18 +0000 (21:25 +0000)]
KVM: selftests: Read binary stat data in lib
Move the code to read the binary stats data to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
Also opportunistically remove an unnecessary calculation with
"size_data" in stats_test.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <
20220613212523.
3436117-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Mon, 13 Jun 2022 21:25:17 +0000 (21:25 +0000)]
KVM: selftests: Clean up coding style in binary stats test
Fix a variety of code style violations and/or inconsistencies in the
binary stats test. The 80 char limit is a soft limit and can and should
be ignored/violated if doing so improves the overall code readability.
Specifically, provide consistent indentation and don't split expressions
at arbitrary points just to honor the 80 char limit.
Opportunistically expand/add comments to call out the more subtle aspects
of the code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <
20220613212523.
3436117-5-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Mon, 13 Jun 2022 21:25:16 +0000 (21:25 +0000)]
KVM: selftests: Read binary stats desc in lib
Move the code to read the binary stats descriptors to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <
20220613212523.
3436117-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Mon, 13 Jun 2022 21:25:15 +0000 (21:25 +0000)]
KVM: selftests: Read binary stats header in lib
Move the code to read the binary stats header to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <
20220613212523.
3436117-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Mon, 13 Jun 2022 21:25:14 +0000 (21:25 +0000)]
KVM: selftests: Remove dynamic memory allocation for stats header
There's no need to allocate dynamic memory for the stats header since
its size is known at compile time.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <
20220613212523.
3436117-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 8 Jun 2022 22:45:16 +0000 (22:45 +0000)]
KVM: selftests: Add MONITOR/MWAIT quirk test
Add a test to verify the "MONITOR/MWAIT never fault" quirk, and as a
bonus, also verify the related "MISC_ENABLES ignores ENABLE_MWAIT" quirk.
If the "never fault" quirk is enabled, MONITOR/MWAIT should always be
emulated as NOPs, even if they're reported as disabled in guest CPUID.
Use the MISC_ENABLES quirk to coerce KVM into toggling the MWAIT CPUID
enable, as KVM now disallows manually toggling CPUID bits after running
the vCPU.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220608224516.
3788274-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 8 Jun 2022 22:45:15 +0000 (22:45 +0000)]
KVM: selftests: Use exception fixup for #UD/#GP Hyper-V MSR/hcall tests
Use exception fixup to verify VMCALL/RDMSR/WRMSR fault as expected in the
Hyper-V Features test.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220608224516.
3788274-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 8 Jun 2022 22:45:14 +0000 (22:45 +0000)]
KVM: selftests: Mostly fix broken Hyper-V Features test
Explicitly do all setup at every stage of the Hyper-V Features test, e.g.
set the MSR/hypercall, enable capabilities, etc... Now that the VM is
recreated for every stage, values that are written into the VM's address
space, i.e. shared with the guest, are reset between sub-tests, as are
any capabilities, etc...
Fix the hypercall params as well, which were broken in the same rework.
The "hcall" struct/pointer needs to point at the hcall_params object, not
the set of hypercall pages.
The goofs were hidden by the test's dubious behavior of using '0' to
signal "done", i.e. the MSR test ran exactly one sub-test, and the
hypercall test was a gigantic nop.
Fixes:
6c1186430a80 ("KVM: selftests: Avoid KVM_SET_CPUID2 after KVM_RUN in hyperv_features test")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220608224516.
3788274-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 8 Jun 2022 22:45:13 +0000 (22:45 +0000)]
KVM: selftests: Add x86-64 support for exception fixup
Add x86-64 support for exception fixup on single instructions, without
forcing tests to install their own fault handlers. Use registers r9-r11
to flag the instruction as "safe" and pass fixup/vector information,
i.e. introduce yet another flavor of fixup (versus the kernel's in-memory
tables and KUT's per-CPU area) to take advantage of KVM sefltests being
64-bit only.
Using only registers avoids the need to allocate fixup tables, ensure
FS or GS base is valid for the guest, ensure memory is mapped into the
guest, etc..., and also reduces the potential for recursive faults due to
accessing memory.
Providing exception fixup trivializes tests that just want to verify that
an instruction faults, e.g. no need to track start/end using global
labels, no need to install a dedicated handler, etc...
Deliberately do not support #DE in exception fixup so that the fixup glue
doesn't need to account for a fault with vector == 0, i.e. the vector can
also indicate that a fault occurred. KVM injects #DE only for esoteric
emulation scenarios, i.e. there's very, very little value in testing #DE.
Force any test that wants to generate #DEs to install its own handler(s).
Use kvm_pv_test as a guinea pig for the new fixup, as it has a very
straightforward use case of wanting to verify that RDMSR and WRMSR fault.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220608224516.
3788274-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 8 Jun 2022 22:45:12 +0000 (22:45 +0000)]
KVM: x86: Add a quirk for KVM's "MONITOR/MWAIT are NOPs!" behavior
Add a quirk for KVM's behavior of emulating intercepted MONITOR/MWAIT
instructions a NOPs regardless of whether or not they are supported in
guest CPUID. KVM's current behavior was likely motiviated by a certain
fruity operating system that expects MONITOR/MWAIT to be supported
unconditionally and blindly executes MONITOR/MWAIT without first checking
CPUID. And because KVM does NOT advertise MONITOR/MWAIT to userspace,
that's effectively the default setup for any VMM that regurgitates
KVM_GET_SUPPORTED_CPUID to KVM_SET_CPUID2.
Note, this quirk interacts with KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT. The
behavior is actually desirable, as userspace VMMs that want to
unconditionally hide MONITOR/MWAIT from the guest can leave the
MISC_ENABLE quirk enabled.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220608224516.
3788274-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Sat, 11 Jun 2022 00:57:55 +0000 (00:57 +0000)]
KVM: x86: Ignore benign host writes to "unsupported" F15H_PERF_CTL MSRs
Ignore host userspace writes of '0' to F15H_PERF_CTL MSRs KVM reports
in the MSR-to-save list, but the MSRs are ultimately unsupported. All
MSRs in said list must be writable by userspace, e.g. if userspace sends
the list back at KVM without filtering out the MSRs it doesn't need.
Note, reads of said MSRs already have the desired behavior.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220611005755.753273-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Sat, 11 Jun 2022 00:57:54 +0000 (00:57 +0000)]
KVM: x86: Ignore benign host accesses to "unsupported" PEBS and BTS MSRs
Ignore host userspace reads and writes of '0' to PEBS and BTS MSRs that
KVM reports in the MSR-to-save list, but the MSRs are ultimately
unsupported. All MSRs in said list must be writable by userspace, e.g.
if userspace sends the list back at KVM without filtering out the MSRs it
doesn't need.
Fixes:
8183a538cd95 ("KVM: x86/pmu: Add IA32_DS_AREA MSR emulation to support guest DS")
Fixes:
902caeb6841a ("KVM: x86/pmu: Add PEBS_DATA_CFG MSR emulation to support adaptive PEBS")
Fixes:
c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220611005755.753273-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Sat, 11 Jun 2022 00:57:53 +0000 (00:57 +0000)]
KVM: VMX: Use vcpu_get_perf_capabilities() to get guest-visible value
Use vcpu_get_perf_capabilities() when querying MSR_IA32_PERF_CAPABILITIES
from the guest's perspective, e.g. to update the vPMU and to determine
which MSRs exist. If userspace ignores MSR_IA32_PERF_CAPABILITIES but
clear X86_FEATURE_PDCM, the guest should see '0'.
Fixes:
902caeb6841a ("KVM: x86/pmu: Add PEBS_DATA_CFG MSR emulation to support adaptive PEBS")
Fixes:
c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220611005755.753273-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Sat, 11 Jun 2022 00:57:52 +0000 (00:57 +0000)]
Revert "KVM: x86: always allow host-initiated writes to PMU MSRs"
Revert the hack to allow host-initiated accesses to all "PMU" MSRs,
as intel_is_valid_msr() returns true for _all_ MSRs, regardless of whether
or not it has a snowball's chance in hell of actually being a PMU MSR.
That mostly gets papered over by the actual get/set helpers only handling
MSRs that they knows about, except there's the minor detail that
kvm_pmu_{g,s}et_msr() eat reads and writes when the PMU is disabled.
I.e. KVM will happy allow reads and writes to _any_ MSR if the PMU is
disabled, either via module param or capability.
This reverts commit
d1c88a4020567ba4da52f778bcd9619d87e4ea75.
Fixes:
d1c88a402056 ("KVM: x86: always allow host-initiated writes to PMU MSRs")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220611005755.753273-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Sat, 11 Jun 2022 00:57:51 +0000 (00:57 +0000)]
Revert "KVM: x86/pmu: Accept 0 for absent PMU MSRs when host-initiated if !enable_pmu"
Eating reads and writes to all "PMU" MSRs when there is no PMU is wildly
broken as it results in allowing accesses to _any_ MSR on Intel CPUs
as intel_is_valid_msr() returns true for all host_initiated accesses.
A revert of commit
d1c88a402056 ("KVM: x86: always allow host-initiated
writes to PMU MSRs") will soon follow.
This reverts commit
8e6a58e28b34e8d247e772159b8fa8f6bae39192.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220611005755.753273-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Sat, 11 Jun 2022 00:57:50 +0000 (00:57 +0000)]
KVM: VMX: Give host userspace full control of MSR_IA32_PERF_CAPABILITIES
Do not clear manipulate MSR_IA32_PERF_CAPABILITIES in intel_pmu_refresh(),
i.e. give userspace full control over capability/read-only MSRs. KVM is
not a babysitter, it is userspace's responsiblity to provide a valid and
coherent vCPU model.
Attempting to "help" the guest by forcing a consistent model creates edge
cases, and ironicially leads to inconsistent behavior.
Example #1: KVM doesn't do intel_pmu_refresh() when userspace writes
the MSR.
Example #2: KVM doesn't clear the bits when the PMU is disabled, or when
there's no architectural PMU.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220611005755.753273-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Sat, 11 Jun 2022 00:57:49 +0000 (00:57 +0000)]
KVM: x86: Give host userspace full control of MSR_IA32_MISC_ENABLES
Give userspace full control of the read-only bits in MISC_ENABLES, i.e.
do not modify bits on PMU refresh and do not preserve existing bits when
userspace writes MISC_ENABLES. With a few exceptions where KVM doesn't
expose the necessary controls to userspace _and_ there is a clear cut
association with CPUID, e.g. reserved CR4 bits, KVM does not own the vCPU
and should not manipulate the vCPU model on behalf of "dummy user space".
The argument that KVM is doing userspace a favor because "the order of
setting vPMU capabilities and MSR_IA32_MISC_ENABLE is not strictly
guaranteed" is specious, as attempting to configure MSRs on behalf of
userspace inevitably leads to edge cases precisely because KVM does not
prescribe a specific order of initialization.
Example #1: intel_pmu_refresh() consumes and modifies the vCPU's
MSR_IA32_PERF_CAPABILITIES, and so assumes userspace initializes config
MSRs before setting the guest CPUID model. If userspace sets CPUID
first, then KVM will mark PEBS as available when arch.perf_capabilities
is initialized with a non-zero PEBS format, thus creating a bad vCPU
model if userspace later disables PEBS by writing PERF_CAPABILITIES.
Example #2: intel_pmu_refresh() does not clear PERF_CAP_PEBS_MASK in
MSR_IA32_PERF_CAPABILITIES if there is no vPMU, making KVM inconsistent
in its desire to be consistent.
Example #3: intel_pmu_refresh() does not clear MSR_IA32_MISC_ENABLE_EMON
if KVM_SET_CPUID2 is called multiple times, first with a vPMU, then
without a vPMU. While slightly contrived, it's plausible a VMM could
reflect KVM's default vCPU and then operate on KVM's copy of CPUID to
later clear the vPMU settings, e.g. see KVM's selftests.
Example #4: Enumerating an Intel vCPU on an AMD host will not call into
intel_pmu_refresh() at any point, and so the BTS and PEBS "unavailable"
bits will be left clear, without any way for userspace to set them.
Keep the "R" behavior of the bit 7, "EMON available", for the guest.
Unlike the BTS and PEBS bits, which are fully "RO", the EMON bit can be
written with a different value, but that new value is ignored.
Cc: Like Xu <likexu@tencent.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Message-Id: <
20220611005755.753273-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dongliang Mu [Tue, 14 Jun 2022 13:34:58 +0000 (21:34 +0800)]
x86: kvm: remove NULL check before kfree
kfree can handle NULL pointer as its argument.
According to coccinelle isnullfree check, remove NULL check
before kfree operation.
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Message-Id: <
20220614133458.147314-1-dzm91@hust.edu.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 29 Apr 2022 01:04:07 +0000 (01:04 +0000)]
KVM: Do not zero initialize 'pfn' in hva_to_pfn()
Drop the unnecessary initialization of the local 'pfn' variable in
hva_to_pfn(). First and foremost, '0' is not an invalid pfn, it's a
perfectly valid pfn on most architectures. I.e. if hva_to_pfn() were to
return an "uninitializd" pfn, it would actually be interpeted as a legal
pfn by most callers.
Second, hva_to_pfn() can't return an uninitialized pfn as hva_to_pfn()
explicitly sets pfn to an error value (or returns an error value directly)
if a helper returns failure, and all helpers set the pfn on success.
The zeroing of 'pfn' was introduced by commit
2fc843117d64 ("KVM:
reorganize hva_to_pfn"), probably to avoid "uninitialized variable"
warnings on statements that return pfn. However, no compiler seems
to produce them, making the initialization unnecessary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220429010416.
2788472-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 29 Apr 2022 01:04:16 +0000 (01:04 +0000)]
KVM: x86/mmu: Shove refcounted page dependency into host_pfn_mapping_level()
Move the check that restricts mapping huge pages into the guest to pfns
that are backed by refcounted 'struct page' memory into the helper that
actually "requires" a 'struct page', host_pfn_mapping_level(). In
addition to deduplicating code, moving the check to the helper eliminates
the subtle requirement that the caller check that the incoming pfn is
backed by a refcounted struct page, and as an added bonus avoids an extra
pfn_to_page() lookup.
Note, the is_error_noslot_pfn() check in kvm_mmu_hugepage_adjust() needs
to stay where it is, as it guards against dereferencing a NULL memslot in
the kvm_slot_dirty_track_enabled() that follows.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220429010416.
2788472-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 29 Apr 2022 01:04:15 +0000 (01:04 +0000)]
KVM: Rename/refactor kvm_is_reserved_pfn() to kvm_pfn_to_refcounted_page()
Rename and refactor kvm_is_reserved_pfn() to kvm_pfn_to_refcounted_page()
to better reflect what KVM is actually checking, and to eliminate extra
pfn_to_page() lookups. The kvm_release_pfn_*() an kvm_try_get_pfn()
helpers in particular benefit from "refouncted" nomenclature, as it's not
all that obvious why KVM needs to get/put refcounts for some PG_reserved
pages (ZERO_PAGE and ZONE_DEVICE).
Add a comment to call out that the list of exceptions to PG_reserved is
all but guaranteed to be incomplete. The list has mostly been compiled
by people throwing noodles at KVM and finding out they stick a little too
well, e.g. the ZERO_PAGE's refcount overflowed and ZONE_DEVICE pages
didn't get freed.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220429010416.
2788472-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 29 Apr 2022 01:04:14 +0000 (01:04 +0000)]
KVM: Take a 'struct page', not a pfn in kvm_is_zone_device_page()
Operate on a 'struct page' instead of a pfn when checking if a page is a
ZONE_DEVICE page, and rename the helper accordingly. Generally speaking,
KVM doesn't actually care about ZONE_DEVICE memory, i.e. shouldn't do
anything special for ZONE_DEVICE memory. Rather, KVM wants to treat
ZONE_DEVICE memory like regular memory, and the need to identify
ZONE_DEVICE memory only arises as an exception to PG_reserved pages. In
other words, KVM should only ever check for ZONE_DEVICE memory after KVM
has already verified that there is a struct page associated with the pfn.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220429010416.
2788472-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 29 Apr 2022 01:04:13 +0000 (01:04 +0000)]
KVM: Remove kvm_vcpu_gfn_to_page() and kvm_vcpu_gpa_to_page()
Drop helpers to convert a gfn/gpa to a 'struct page' in the context of a
vCPU. KVM doesn't require that guests be backed by 'struct page' memory,
thus any use of helpers that assume 'struct page' is bound to be flawed,
as was the case for the recently removed last user in x86's nested VMX.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220429010416.
2788472-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 29 Apr 2022 01:04:12 +0000 (01:04 +0000)]
KVM: Don't WARN if kvm_pfn_to_page() encounters a "reserved" pfn
Drop a WARN_ON() if kvm_pfn_to_page() encounters a "reserved" pfn, which
in this context means a struct page that has PG_reserved but is not a/the
ZERO_PAGE and is not a ZONE_DEVICE page. The usage, via gfn_to_page(),
in x86 is safe as gfn_to_page() is used only to retrieve a page from
KVM-controlled memslot, but the usage in PPC and s390 operates on
arbitrary gfns and thus memslots that can be backed by incompatible
memory.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220429010416.
2788472-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 29 Apr 2022 01:04:11 +0000 (01:04 +0000)]
KVM: nVMX: Use kvm_vcpu_map() to get/pin vmcs12's APIC-access page
Use kvm_vcpu_map() to get/pin the backing for vmcs12's APIC-access page,
there's no reason it has to be restricted to 'struct page' backing. The
APIC-access page actually doesn't need to be backed by anything, which is
ironically why it got left behind by the series which introduced
kvm_vcpu_map()[1]; the plan was to shove a dummy pfn into vmcs02[2], but
that code never got merged.
Switching the APIC-access page to kvm_vcpu_map() doesn't preclude using a
magic pfn in the future, and will allow a future patch to drop
kvm_vcpu_gpa_to_page().
[1] https://lore.kernel.org/all/
1547026933-31226-1-git-send-email-karahmed@amazon.de
[2] https://lore.kernel.org/lkml/
1543845551-4403-1-git-send-email-karahmed@amazon.de
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220429010416.
2788472-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 29 Apr 2022 01:04:10 +0000 (01:04 +0000)]
KVM: Avoid pfn_to_page() and vice versa when releasing pages
Invert the order of KVM's page/pfn release helpers so that the "inner"
helper operates on a page instead of a pfn. As pointed out by Linus[*],
converting between struct page and a pfn isn't necessarily cheap, and
that's not even counting the overhead of is_error_noslot_pfn() and
kvm_is_reserved_pfn(). Even if the checks were dirt cheap, there's no
reason to convert from a page to a pfn and back to a page, just to mark
the page dirty/accessed or to put a reference to the page.
Opportunistically drop a stale declaration of kvm_set_page_accessed()
from kvm_host.h (there was no implementation).
No functional change intended.
[*] https://lore.kernel.org/all/CAHk-=wifQimj2d6npq-wCi5onYPjzQg4vyO4tFcPJJZr268cRw@mail.gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220429010416.
2788472-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 29 Apr 2022 01:04:09 +0000 (01:04 +0000)]
KVM: Don't set Accessed/Dirty bits for ZERO_PAGE
Don't set Accessed/Dirty bits for a struct page with PG_reserved set,
i.e. don't set A/D bits for the ZERO_PAGE. The ZERO_PAGE (or pages
depending on the architecture) should obviously never be written, and
similarly there's no point in marking it accessed as the page will never
be swapped out or reclaimed. The comment in page-flags.h is quite clear
that PG_reserved pages should be managed only by their owner, and
strictly following that mandate also simplifies KVM's logic.
Fixes:
7df003c85218 ("KVM: fix overflow of zero page refcount with ksm running")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220429010416.
2788472-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 29 Apr 2022 01:04:08 +0000 (01:04 +0000)]
KVM: Drop bogus "pfn != 0" guard from kvm_release_pfn()
Remove a check from kvm_release_pfn() to bail if the provided @pfn is
zero. Zero is a perfectly valid pfn on most architectures, and should
not be used to indicate an error or an invalid pfn. The bogus check was
added by commit
917248144db5 ("x86/kvm: Cache gfn to pfn translation"),
which also did the bad thing of zeroing the pfn and gfn to mark a cache
invalid. Thankfully, that bad behavior was axed by commit
357a18ad230f
("KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache").
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220429010416.
2788472-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 14 Jun 2022 23:33:28 +0000 (23:33 +0000)]
KVM: x86/mmu: Use common logic for computing the 32/64-bit base PA mask
Use common logic for computing PT_BASE_ADDR_MASK for 32-bit, 64-bit, and
EPT paging. Both PAGE_MASK and the new-common logic are supsersets of
what is actually needed for 32-bit paging. PAGE_MASK sets bits 63:12 and
the former GUEST_PT64_BASE_ADDR_MASK sets bits 51:12, so regardless of
which value is used, the result will always be bits 31:12.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220614233328.
3896033-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 14 Jun 2022 23:33:27 +0000 (23:33 +0000)]
KVM: x86/mmu: Truncate paging32's PT_BASE_ADDR_MASK to 32 bits
Truncate paging32's PT_BASE_ADDR_MASK to a pt_element_t, i.e. to 32 bits.
Ignoring PSE huge pages, the mask is only used in conjunction with gPTEs,
which are 32 bits, and so the address is limited to bits 31:12.
PSE huge pages encoded PA bits 39:32 in PTE bits 20:13, i.e. need custom
logic to handle their funky encoding regardless of PT_BASE_ADDR_MASK.
Note, PT_LVL_OFFSET_MASK is somewhat confusing in that it computes the
offset of the _gfn_, not of the gpa, i.e. not having bits 63:32 set in
PT_BASE_ADDR_MASK is again correct.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220614233328.
3896033-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 15 Jun 2022 14:15:56 +0000 (10:15 -0400)]
KVM: x86/mmu: Use common macros to compute 32/64-bit paging masks
Dedup the code for generating (most of) the per-type PT_* masks in
paging_tmpl.h. The relevant macros only vary based on the number of bits
per level, and that smidge of info is already provided in a common form
as PT_LEVEL_BITS.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220614233328.
3896033-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 14 Jun 2022 23:33:25 +0000 (23:33 +0000)]
KVM: x86/mmu: Use separate namespaces for guest PTEs and shadow PTEs
Separate the macros for KVM's shadow PTEs (SPTE) from guest 64-bit PTEs
(PT64). SPTE and PT64 are _mostly_ the same, but the few differences are
quite critical, e.g. *_BASE_ADDR_MASK must differentiate between host and
guest physical address spaces, and SPTE_PERM_MASK (was PT64_PERM_MASK) is
very much specific to SPTEs.
Opportunistically (and temporarily) move most guest macros into paging.h
to clearly associate them with shadow paging, and to ensure that they're
not used as of this commit. A future patch will eliminate them entirely.
Sadly, PT32_LEVEL_BITS is left behind in mmu_internal.h because it's
needed for the quadrant calculation in kvm_mmu_get_page(). The quadrant
calculation is hot enough (when using shadow paging with 32-bit guests)
that adding a per-context helper is undesirable, and burying the
computation in paging_tmpl.h with a forward declaration isn't exactly an
improvement.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220614233328.
3896033-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 14 Jun 2022 23:33:24 +0000 (23:33 +0000)]
KVM: x86/mmu: Dedup macros for computing various page table masks
Provide common helper macros to generate various masks, shifts, etc...
for 32-bit vs. 64-bit page tables. Only the inputs differ, the actual
calculations are identical.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220614233328.
3896033-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 14 Jun 2022 23:33:23 +0000 (23:33 +0000)]
KVM: x86/mmu: Bury 32-bit PSE paging helpers in paging_tmpl.h
Move a handful of one-off macros and helpers for 32-bit PSE paging into
paging_tmpl.h and hide them behind "PTTYPE == 32". Under no circumstance
should anything but 32-bit shadow paging care about PSE paging.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220614233328.
3896033-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 14 Jun 2022 23:33:22 +0000 (23:33 +0000)]
KVM: VMX: Refactor 32-bit PSE PT creation to avoid using MMU macro
Compute the number of PTEs to be filled for the 32-bit PSE page tables
using the page size and the size of each entry. While using the MMU's
PT32_ENT_PER_PAGE macro is arguably better in isolation, removing VMX's
usage will allow a future namespacing cleanup to move the guest page
table macros into paging_tmpl.h, out of the reach of code that isn't
directly related to shadow paging.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220614233328.
3896033-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 14 Jun 2022 23:05:48 +0000 (23:05 +0000)]
KVM: x86: Use lapic_in_kernel() to query in-kernel APIC in APICv helper
Use lapic_in_kernel() in kvm_vcpu_apicv_active() to take advantage of the
kvm_has_noapic_vcpu static branch.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220614230548.
3852141-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 14 Jun 2022 23:05:47 +0000 (23:05 +0000)]
KVM: x86: Move "apicv_active" into "struct kvm_lapic"
Move the per-vCPU apicv_active flag into KVM's local APIC instance.
APICv is fully dependent on an in-kernel local APIC, but that's not at
all clear when reading the current code due to the flag being stored in
the generic kvm_vcpu_arch struct.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220614230548.
3852141-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 14 Jun 2022 23:05:46 +0000 (23:05 +0000)]
KVM: x86: Check for in-kernel xAPIC when querying APICv for directed yield
Use kvm_vcpu_apicv_active() to check if APICv is active when seeing if a
vCPU is a candidate for directed yield due to a pending ACPIv interrupt.
This will allow moving apicv_active into kvm_lapic without introducing a
potential NULL pointer deref (kvm_vcpu_apicv_active() effectively adds a
pre-check on the vCPU having an in-kernel APIC).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220614230548.
3852141-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 14 Jun 2022 23:05:45 +0000 (23:05 +0000)]
KVM: x86: Drop @vcpu parameter from kvm_x86_ops.hwapic_isr_update()
Drop the unused @vcpu parameter from hwapic_isr_update(). AMD/AVIC is
unlikely to implement the helper, and VMX/APICv doesn't need the vCPU as
it operates on the current VMCS. The result is somewhat odd, but allows
for a decent amount of (future) cleanup in the APIC code.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220614230548.
3852141-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 14 Jun 2022 23:05:44 +0000 (23:05 +0000)]
KVM: SVM: Drop unused AVIC / kvm_x86_ops declarations
Drop a handful of unused AVIC function declarations whose implementations
were removed during the conversion to optional static calls.
No functional change intended.
Fixes:
abb6d479e226 ("KVM: x86: make several APIC virtualization callbacks optional")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220614230548.
3852141-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 14 Jun 2022 21:58:31 +0000 (21:58 +0000)]
KVM: nVMX: Update vmcs12 on BNDCFGS write, not at vmcs02=>vmcs12 sync
Update vmcs12->guest_bndcfgs on intercepted writes to BNDCFGS from L2
instead of waiting until vmcs02 is synchronized to vmcs12. KVM always
intercepts BNDCFGS accesses, so the only way the value in vmcs02 can
change is via KVM's explicit VMWRITE during emulation.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220614215831.
3762138-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 14 Jun 2022 21:58:30 +0000 (21:58 +0000)]
KVM: nVMX: Save BNDCFGS to vmcs12 iff relevant controls are exposed to L1
Save BNDCFGS to vmcs12 (from vmcs02) if and only if at least of one of
the load-on-entry or clear-on-exit fields for BNDCFGS is enumerated as an
allowed-1 bit in vmcs12. Skipping the field avoids an unnecessary VMREAD
when MPX is supported but not exposed to L1.
Per Intel's SDM:
If the processor supports either the 1-setting of the "load IA32_BNDCFGS"
VM-entry control or that of the "clear IA32_BNDCFGS" VM-exit control, the
contents of the IA32_BNDCFGS MSR are saved into the corresponding field.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20220614215831.
3762138-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>