OSDN Git Service
David S. Miller [Wed, 30 Nov 2016 19:33:44 +0000 (14:33 -0500)]
Merge tag 'wireless-drivers-for-davem-2016-11-29' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.9
mwifiex
* properly terminate SSIDs so that uninitalised memory is not printed
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 30 Nov 2016 19:14:09 +0000 (14:14 -0500)]
Merge branch 'l2tp-fixes'
Guillaume Nault says:
====================
l2tp: fixes for l2tp_ip and l2tp_ip6 socket handling
This series addresses problems found while working on commit
32c231164b76
("l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()").
The first three patches fix races in socket's connect, recv and bind
operations. The last two ones fix scenarios where l2tp fails to
correctly lookup its userspace sockets.
Apart from the last patch, which is l2tp_ip6 specific, every patch
fixes the same problem in the L2TP IPv4 and IPv6 code.
All problems fixed by this series exist since the creation of the
l2tp_ip and l2tp_ip6 modules.
Changes since v1:
* Patch #3: fix possible uninitialised use of 'ret' in l2tp_ip_bind().
====================
Acked-by: James Chapman <jchapman@katalix.com>
Guillaume Nault [Tue, 29 Nov 2016 12:09:48 +0000 (13:09 +0100)]
l2tp: fix address test in __l2tp_ip6_bind_lookup()
The '!(addr && ipv6_addr_equal(addr, laddr))' part of the conditional
matches if addr is NULL or if addr != laddr.
But the intend of __l2tp_ip6_bind_lookup() is to find a sockets with
the same address, so the ipv6_addr_equal() condition needs to be
inverted.
For better clarity and consistency with the rest of the expression, the
(!X || X == Y) notation is used instead of !(X && X != Y).
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Tue, 29 Nov 2016 12:09:47 +0000 (13:09 +0100)]
l2tp: fix lookup for sockets not bound to a device in l2tp_ip
When looking up an l2tp socket, we must consider a null netdevice id as
wild card. There are currently two problems caused by
__l2tp_ip_bind_lookup() not considering 'dif' as wild card when set to 0:
* A socket bound to a device (i.e. with sk->sk_bound_dev_if != 0)
never receives any packet. Since __l2tp_ip_bind_lookup() is called
with dif == 0 in l2tp_ip_recv(), sk->sk_bound_dev_if is always
different from 'dif' so the socket doesn't match.
* Two sockets, one bound to a device but not the other, can be bound
to the same address. If the first socket binding to the address is
the one that is also bound to a device, the second socket can bind
to the same address without __l2tp_ip_bind_lookup() noticing the
overlap.
To fix this issue, we need to consider that any null device index, be
it 'sk->sk_bound_dev_if' or 'dif', matches with any other value.
We also need to pass the input device index to __l2tp_ip_bind_lookup()
on reception so that sockets bound to a device never receive packets
from other devices.
This patch fixes l2tp_ip6 in the same way.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Tue, 29 Nov 2016 12:09:46 +0000 (13:09 +0100)]
l2tp: fix racy socket lookup in l2tp_ip and l2tp_ip6 bind()
It's not enough to check for sockets bound to same address at the
beginning of l2tp_ip{,6}_bind(): even if no socket is found at that
time, a socket with the same address could be bound before we take
the l2tp lock again.
This patch moves the lookup right before inserting the new socket, so
that no change can ever happen to the list between address lookup and
socket insertion.
Care is taken to avoid side effects on the socket in case of failure.
That is, modifications of the socket are done after the lookup, when
binding is guaranteed to succeed, and before releasing the l2tp lock,
so that concurrent lookups will always see fully initialised sockets.
For l2tp_ip, 'ret' is set to -EINVAL before checking the SOCK_ZAPPED
bit. Error code was mistakenly set to -EADDRINUSE on error by commit
32c231164b76 ("l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()").
Using -EINVAL restores original behaviour.
For l2tp_ip6, the lookup is now always done with the correct bound
device. Before this patch, when binding to a link-local address, the
lookup was done with the original sk->sk_bound_dev_if, which was later
overwritten with addr->l2tp_scope_id. Lookup is now performed with the
final sk->sk_bound_dev_if value.
Finally, the (addr_len >= sizeof(struct sockaddr_in6)) check has been
dropped: addr is a sockaddr_l2tpip6 not sockaddr_in6 and addr_len has
already been checked at this point (this part of the code seems to have
been copy-pasted from net/ipv6/raw.c).
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Tue, 29 Nov 2016 12:09:45 +0000 (13:09 +0100)]
l2tp: hold socket before dropping lock in l2tp_ip{, 6}_recv()
Socket must be held while under the protection of the l2tp lock; there
is no guarantee that sk remains valid after the read_unlock_bh() call.
Same issue for l2tp_ip and l2tp_ip6.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Tue, 29 Nov 2016 12:09:44 +0000 (13:09 +0100)]
l2tp: lock socket before checking flags in connect()
Socket flags aren't updated atomically, so the socket must be locked
while reading the SOCK_ZAPPED flag.
This issue exists for both l2tp_ip and l2tp_ip6. For IPv6, this patch
also brings error handling for __ip6_datagram_connect() failures.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Shenai [Tue, 29 Nov 2016 11:44:52 +0000 (17:14 +0530)]
cxgb4: Add PCI device ID for new adapter
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikita Yushchenko [Tue, 29 Nov 2016 06:44:51 +0000 (09:44 +0300)]
net: fec: cache statistics while device is down
Execution 'ethtool -S' on fec device that is down causes OOPS on Vybrid
board:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xe0898200
pgd =
ddecc000
[
e0898200] *pgd=
9e406811, *pte=
400d1653, *ppte=
400d1453
Internal error: : 1008 [#1] SMP ARM
...
Reason of OOPS is that fec_enet_get_ethtool_stats() accesses fec
registers while IPG clock is stopped by PM.
Fix that by caching statistics in fec_enet_private. Cache is initialized
at device probe time, and updated at statistics request time if device
is up, and also just before turning device off on down path.
Additional locking is not needed, since cached statistics is accessed
either before device is registered, or under rtnl_lock().
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haishuang Yan [Tue, 29 Nov 2016 01:59:36 +0000 (09:59 +0800)]
vxlan: fix a potential issue when create a new vxlan fdb entry.
vxlan_fdb_append may return error, so add the proper check,
otherwise it will cause memory leak.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Changes in v2:
- Unnecessary to initialize rc to zero.
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniele Di Proietto [Mon, 28 Nov 2016 23:43:53 +0000 (15:43 -0800)]
openvswitch: Fix skb leak in IPv6 reassembly.
If nf_ct_frag6_gather() returns an error other than -EINPROGRESS, it
means that we still have a reference to the skb. We should free it
before returning from handle_fragments, as stated in the comment above.
Fixes:
daaa7d647f81 ("netfilter: ipv6: avoid nf_iterate recursion")
CC: Florian Westphal <fw@strlen.de>
CC: Pravin B Shelar <pshelar@ovn.org>
CC: Joe Stringer <joe@ovn.org>
Signed-off-by: Daniele Di Proietto <diproiettod@ovn.org>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 30 Nov 2016 04:17:04 +0000 (23:17 -0500)]
Merge branch 'fixed-phy-phydev-leaks'
Johan Hovold says:
====================
net: fix fixed-link phydev leaks
This series fixes failures to deregister and free fixed-link phydevs
that have been registered using the of_phy_register_fixed_link()
interface.
All but two drivers currently fail to do this and this series fixes most
of them with the exception of a staging driver and the stmmac drivers
which will be fixed by follow-on patches.
Included are also a couple of fixes for related of-node leaks.
Note that all patches except the of_mdio one have been compile-tested
only.
Also note that the series is against net due to dependencies not yet in
net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:25:09 +0000 (19:25 +0100)]
net: dsa: slave: fix fixed-link phydev leaks
Make sure to deregister and free any fixed-link PHY registered using
of_phy_register_fixed_link() on slave-setup errors and on slave destroy.
Fixes:
0d8bcdd383b8 ("net: dsa: allow for more complex PHY setups")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:25:08 +0000 (19:25 +0100)]
net: ethernet: ti: davinci_emac: fix fixed-link phydev and of-node leaks
Make sure to deregister and free any fixed-link PHY registered using
of_phy_register_fixed_link() on probe errors and on driver unbind.
Also remember to put the of-node reference on probe errors.
Fixes:
1bb6aa56bb38 ("net: davinci_emac: Add support for fixed-link
PHY")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:25:07 +0000 (19:25 +0100)]
net: ethernet: dwc_eth_qos: fix fixed-link phydev leaks
Make sure to deregister and free any fixed-link PHY registered using
of_phy_register_fixed_link() on probe errors and on driver unbind.
Fixes:
077742dac2c7 ("dwc_eth_qos: Add support for Synopsys DWC Ethernet
QoS")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:25:06 +0000 (19:25 +0100)]
net: ethernet: renesas: ravb: fix fixed-link phydev leaks
Make sure to deregister and free any fixed-link PHY registered using
of_phy_register_fixed_link() on initialisation errors and on device
close after having disconnected the PHY.
Fixes:
b4bc88a868ed ("ravb: Add fixed-link support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:25:05 +0000 (19:25 +0100)]
net: ethernet: mediatek: fix fixed-link phydev leaks
Make sure to deregister and free any fixed-link PHY registered using
of_phy_register_fixed_link() on initialisation errors and on uninit.
Fixes:
0c72c50f6f93 ("net-next: mediatek: add fixed-phy support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:25:04 +0000 (19:25 +0100)]
net: ethernet: marvell: mvneta: fix fixed-link phydev leaks
Make sure to deregister and free any fixed-link PHY registered using
of_phy_register_fixed_link() on probe errors and on driver unbind.
Fixes:
83895bedeee6 ("net: mvneta: add support for fixed links")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:25:03 +0000 (19:25 +0100)]
net: ethernet: ucc_geth: fix fixed-link phydev leaks
Make sure to deregister and free any fixed-link PHY registered using
of_phy_register_fixed_link() on probe errors and on driver unbind.
Fixes:
87009814cdbb ("ucc_geth: use the new fixed PHY helpers")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:25:02 +0000 (19:25 +0100)]
net: ethernet: gianfar: fix fixed-link phydev leaks
Make sure to deregister and free any fixed-link PHY registered using
of_phy_register_fixed_link() on probe errors and on driver unbind.
Fixes:
be40364544bd ("gianfar: use the new fixed PHY helpers")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:25:01 +0000 (19:25 +0100)]
net: ethernet: fs_enet: fix fixed-link phydev leaks
Make sure to deregister and free any fixed-link PHY registered using
of_phy_register_fixed_link() on probe errors and on driver unbind.
Fixes:
bb74d9a4a87b ("fs_enet: use the new fixed PHY helpers")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:25:00 +0000 (19:25 +0100)]
net: ethernet: fec: fix fixed-link phydev leaks
Make sure to deregister and free any fixed-link PHY registered using
of_phy_register_fixed_link() on probe errors and on driver unbind.
Fixes:
407066f8f371 ("net: fec: Support phys probed from devicetree and
fixed-link")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:24:59 +0000 (19:24 +0100)]
net: ethernet: bcmgenet: fix fixed-link phydev leaks
Make sure to deregister and free any fixed-link PHY registered using
of_phy_register_fixed_link() on probe errors and on driver unbind.
Note that we're still leaking any fixed-link PHY registered in the
non-OF probe path.
Fixes:
9abf0c2b717a ("net: bcmgenet: use the new fixed PHY helpers")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:24:58 +0000 (19:24 +0100)]
net: ethernet: bcmsysport: fix fixed-link phydev leaks
Make sure to deregister and free any fixed-link PHY registered using
of_phy_register_fixed_link() on probe errors and on driver unbind.
Fixes:
186534a3f832 ("net: systemport: use the new fixed PHY helpers")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:24:57 +0000 (19:24 +0100)]
net: ethernet: aurora: nb8800: fix fixed-link phydev leaks
Make sure to deregister and free any fixed-link PHY registered using
of_phy_register_fixed_link() on probe errors and on driver unbind.
Fixes:
c7dfe3abf40e ("net: ethernet: nb8800: support fixed-link DT
node")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:24:56 +0000 (19:24 +0100)]
net: ethernet: altera: fix fixed-link phydev leaks
Make sure to deregister and free any fixed-link PHY registered using
of_phy_register_fixed_link() on probe errors and on driver unbind.
Fixes:
7cdbc6f74f8e ("altera tse: add support for fixed-links.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:24:55 +0000 (19:24 +0100)]
of_mdio: add helper to deregister fixed-link PHYs
Add helper to deregister fixed-link PHYs registered using
of_phy_register_fixed_link().
Convert the two drivers that care to deregister their fixed-link PHYs to
use the new helper, but note that most drivers currently fail to do so.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 28 Nov 2016 18:24:54 +0000 (19:24 +0100)]
net: dsa: slave: fix of-node leak and phy priority
Make sure to drop the reference taken by of_parse_phandle() before
returning from dsa_slave_phy_setup().
Note that this also modifies the PHY priority so that any fixed-link
node is only parsed when no phy-handle is given, which is in accordance
with the common scheme for this.
Fixes:
0d8bcdd383b8 ("net: dsa: allow for more complex PHY setups")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnaldo Carvalho de Melo [Mon, 28 Nov 2016 15:36:58 +0000 (12:36 -0300)]
GSO: Reload iph after pskb_may_pull
As it may get stale and lead to use after free.
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Alexander Duyck <aduyck@mirantis.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Fixes:
cbc53e08a793 ("GSO: Add GSO type for fixed IPv4 ID")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Mon, 28 Nov 2016 14:40:13 +0000 (15:40 +0100)]
sched: cls_flower: remove from hashtable only in case skip sw flag is not set
Be symmetric to hashtable insert and remove filter from hashtable only
in case skip sw flag is not set.
Fixes:
e69985c67c33 ("net/sched: cls_flower: Introduce support in SKIP SW flag")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 28 Nov 2016 14:26:49 +0000 (06:26 -0800)]
net/dccp: fix use-after-free in dccp_invalid_packet
pskb_may_pull() can reallocate skb->head, we need to reload dh pointer
in dccp_invalid_packet() or risk use after free.
Bug found by Andrey Konovalov using syzkaller.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zumeng Chen [Mon, 28 Nov 2016 13:55:00 +0000 (21:55 +0800)]
net: macb: ensure ordering write to re-enable RX smoothly
When a hardware issue happened as described by inline comments, the register
write pattern looks like the following:
<write ~MACB_BIT(RE)>
+ wmb();
<write MACB_BIT(RE)>
There might be a memory barrier between these two write operations, so add wmb
to ensure an flip from 0 to 1 for NCR.
Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cyrille Pitchen [Mon, 28 Nov 2016 13:40:55 +0000 (14:40 +0100)]
net: macb: fix the RX queue reset in macb_rx()
On macb only (not gem), when a RX queue corruption was detected from
macb_rx(), the RX queue was reset: during this process the RX ring
buffer descriptor was initialized by macb_init_rx_ring() but we forgot
to also set bp->rx_tail to 0.
Indeed, when processing the received frames, bp->rx_tail provides the
macb driver with the index in the RX ring buffer of the next buffer to
process. So when the whole ring buffer is reset we must also reset
bp->rx_tail so the driver is synchronized again with the hardware.
Since macb_init_rx_ring() is called from many locations, currently from
macb_rx() and macb_init_rings(), we'd rather add the "bp->rx_tail = 0;"
line inside macb_init_rx_ring() than add the very same line after each
call of this function.
Without this fix, the rx queue is not reset properly to recover from
queue corruption and connection drop may occur.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Fixes:
9ba723b081a2 ("net: macb: remove BUG_ON() and reset the queue to handle RX errors")
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Mon, 28 Nov 2016 11:22:12 +0000 (19:22 +0800)]
netlink: Call cb->done from a worker thread
The cb->done interface expects to be called in process context.
This was broken by the netlink RCU conversion. This patch fixes
it by adding a worker struct to make the cb->done call where
necessary.
Fixes:
21e4902aea80 ("netlink: Lockless lookup with RCU grace...")
Reported-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amir Vadai [Mon, 28 Nov 2016 10:56:40 +0000 (12:56 +0200)]
net/sched: pedit: make sure that offset is valid
Add a validation function to make sure offset is valid:
1. Not below skb head (could happen when offset is negative).
2. Validate both 'offset' and 'at'.
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Holzheu [Mon, 28 Nov 2016 12:48:30 +0000 (13:48 +0100)]
bpf/samples: Fix PT_REGS_IP on s390x and use it
The files "sampleip_kern.c" and "trace_event_kern.c" directly access
"ctx->regs.ip" which is not available on s390x. Fix this and use the
PT_REGS_IP() macro instead.
Also fix the macro for s390x and use "psw.addr" from "pt_regs".
Reported-by: Zvonko Kosic <zvonko.kosic@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikita Yushchenko [Mon, 28 Nov 2016 06:48:48 +0000 (09:48 +0300)]
net: dsa: fix unbalanced dsa_switch_tree reference counting
_dsa_register_switch() gets a dsa_switch_tree object either via
dsa_get_dst() or via dsa_add_dst(). Former path does not increase kref
in returned object (resulting into caller not owning a reference),
while later path does create a new object (resulting into caller owning
a reference).
The rest of _dsa_register_switch() assumes that it owns a reference, and
calls dsa_put_dst().
This causes a memory breakage if first switch in the tree initialized
successfully, but second failed to initialize. In particular, freed
dsa_swith_tree object is left referenced by switch that was initialized,
and later access to sysfs attributes of that switch cause OOPS.
To fix, need to add kref_get() call to dsa_get_dst().
Fixes:
83c0afaec7b7 ("net: dsa: Add new binding implementation")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Mon, 28 Nov 2016 02:52:53 +0000 (18:52 -0800)]
net: handle no dst on skb in icmp6_send
Andrey reported the following while fuzzing the kernel with syzkaller:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 3859 Comm: a.out Not tainted 4.9.0-rc6+ #429
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task:
ffff8800666d4200 task.stack:
ffff880067348000
RIP: 0010:[<
ffffffff833617ec>] [<
ffffffff833617ec>]
icmp6_send+0x5fc/0x1e30 net/ipv6/icmp.c:451
RSP: 0018:
ffff88006734f2c0 EFLAGS:
00010206
RAX:
ffff8800666d4200 RBX:
0000000000000000 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
dffffc0000000000 RDI:
0000000000000018
RBP:
ffff88006734f630 R08:
ffff880064138418 R09:
0000000000000003
R10:
dffffc0000000000 R11:
0000000000000005 R12:
0000000000000000
R13:
ffffffff84e7e200 R14:
ffff880064138484 R15:
ffff8800641383c0
FS:
00007fb3887a07c0(0000) GS:
ffff88006cc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020000000 CR3:
000000006b040000 CR4:
00000000000006f0
Stack:
ffff8800666d4200 ffff8800666d49f8 ffff8800666d4200 ffffffff84c02460
ffff8800666d4a1a 1ffff1000ccdaa2f ffff88006734f498 0000000000000046
ffff88006734f440 ffffffff832f4269 ffff880064ba7456 0000000000000000
Call Trace:
[<
ffffffff83364ddc>] icmpv6_param_prob+0x2c/0x40 net/ipv6/icmp.c:557
[< inline >] ip6_tlvopt_unknown net/ipv6/exthdrs.c:88
[<
ffffffff83394405>] ip6_parse_tlv+0x555/0x670 net/ipv6/exthdrs.c:157
[<
ffffffff8339a759>] ipv6_parse_hopopts+0x199/0x460 net/ipv6/exthdrs.c:663
[<
ffffffff832ee773>] ipv6_rcv+0xfa3/0x1dc0 net/ipv6/ip6_input.c:191
...
icmp6_send / icmpv6_send is invoked for both rx and tx paths. In both
cases the dst->dev should be preferred for determining the L3 domain
if the dst has been set on the skb. Fallback to the skb->dev if it has
not. This covers the case reported here where icmp6_send is invoked on
Rx before the route lookup.
Fixes:
5d41ce29e ("net: icmp6_send should use dst dev to determine L3 domain")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 28 Nov 2016 20:33:47 +0000 (15:33 -0500)]
Merge branch 'mlx4-fixes'
Tariq Toukan says:
====================
mlx4 bug fixes for 4.9
This patchset includes 2 bug fixes:
* In patch 1 we revert the commit that avoids invoking unregister_netdev
in shutdown flow, as it introduces netdev presence issues where
it can be accessed unsafely by ndo operations during the flow.
* Patch 2 is a simple fix for a variable uninitialization issue.
Series generated against net commit:
6998cc6ec237 tipc: resolve connection flow control compatibility problem
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jack Morgenstein [Sun, 27 Nov 2016 17:20:52 +0000 (19:20 +0200)]
net/mlx4: Fix uninitialized fields in rule when adding promiscuous mode to device managed flow steering
In procedure mlx4_flow_steer_promisc_add(), several fields
were left uninitialized in the rule structure.
Correctly initialize these fields.
Fixes:
592e49dda812 ("net/mlx4: Implement promiscuous mode with device managed flow-steering")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Sun, 27 Nov 2016 17:20:51 +0000 (19:20 +0200)]
Revert "net/mlx4_en: Avoid unregister_netdev at shutdown flow"
This reverts commit
9d76931180557270796f9631e2c79b9c7bb3c9fb.
Using unregister_netdev at shutdown flow prevents calling
the netdev's ndos or trying to access its freed resources.
This fixes crashes like the following:
Call Trace:
[<
ffffffff81587a6e>] dev_get_phys_port_id+0x1e/0x30
[<
ffffffff815a36ce>] rtnl_fill_ifinfo+0x4be/0xff0
[<
ffffffff815a53f3>] rtmsg_ifinfo_build_skb+0x73/0xe0
[<
ffffffff815a5476>] rtmsg_ifinfo.part.27+0x16/0x50
[<
ffffffff815a54c8>] rtmsg_ifinfo+0x18/0x20
[<
ffffffff8158a6c6>] netdev_state_change+0x46/0x50
[<
ffffffff815a5e78>] linkwatch_do_dev+0x38/0x50
[<
ffffffff815a6165>] __linkwatch_run_queue+0xf5/0x170
[<
ffffffff815a6205>] linkwatch_event+0x25/0x30
[<
ffffffff81099a82>] process_one_work+0x152/0x400
[<
ffffffff8109a325>] worker_thread+0x125/0x4b0
[<
ffffffff8109a200>] ? rescuer_thread+0x350/0x350
[<
ffffffff8109fc6a>] kthread+0xca/0xe0
[<
ffffffff8109fba0>] ? kthread_park+0x60/0x60
[<
ffffffff816a1285>] ret_from_fork+0x25/0x30
Fixes:
9d7693118055 ("net/mlx4_en: Avoid unregister_netdev at shutdown flow")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reported-by: Steve Wise <swise@opengridcomputing.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roi Dayan [Sun, 27 Nov 2016 10:14:49 +0000 (12:14 +0200)]
net/sched: Export tc_tunnel_key so its UAPI accessible
Export tc_tunnel_key so it can be used from user space.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Borislav Petkov [Sat, 26 Nov 2016 20:53:52 +0000 (21:53 +0100)]
amd-xgbe: Fix unused suspend handlers build warning
Fix:
drivers/net/ethernet/amd/xgbe/xgbe-main.c:835:12: warning: ‘xgbe_suspend’ defined
but not used [-Wunused-function]
drivers/net/ethernet/amd/xgbe/xgbe-main.c:855:12: warning: ‘xgbe_resume’ defined
but not used [-Wunused-function]
I see it during randconfig builds here.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wollrath [Fri, 25 Nov 2016 14:05:26 +0000 (15:05 +0100)]
tcp: Set DEFAULT_TCP_CONG to bbr if DEFAULT_BBR is set
Signed-off-by: Julian Wollrath <jwollrath@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 28 Nov 2016 17:06:55 +0000 (12:06 -0500)]
Merge branch 'fix-RTL8211F-TX-delay-handling'
Martin Blumenstingl says:
====================
net: phy: realtek: fix RTL8211F TX-delay handling
The RTL8211F PHY driver currently enables the TX-delay only when the
phy-mode is PHY_INTERFACE_MODE_RGMII. This is incorrect, because there
are three RGMII variations of the phy-mode which explicitly request the
PHY to enable the RX and/or TX delay, while PHY_INTERFACE_MODE_RGMII
specifies that the PHY should disable the RX and/or TX delays.
Additionally to the RTL8211F PHY driver change this contains a small
update to the phy-mode documentation to clarify the purpose of the
RGMII phy-modes.
While this may not be perfect yet it's at least a start. Please feel
free to drop this patch from this series and send an improved version
yourself.
These patches are the results of recent discussions, see [0]
[0] http://lists.infradead.org/pipermail/linux-amlogic/2016-November/001688.html
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Blumenstingl [Fri, 25 Nov 2016 13:12:01 +0000 (14:12 +0100)]
net: phy: realtek: fix enabling of the TX-delay for RTL8211F
The old logic always enabled the TX-delay when the phy-mode was set to
PHY_INTERFACE_MODE_RGMII. There are dedicated phy-modes which tell the
PHY driver to enable the RX and/or TX delays:
- PHY_INTERFACE_MODE_RGMII should disable the RX and TX delay in the
PHY (if required, the MAC should add the delays in this case)
- PHY_INTERFACE_MODE_RGMII_ID should enable RX and TX delay in the PHY
- PHY_INTERFACE_MODE_RGMII_TXID should enable the TX delay in the PHY
- PHY_INTERFACE_MODE_RGMII_RXID should enable the RX delay in the PHY
(currently not supported by RTL8211F)
With this patch we enable the TX delay for PHY_INTERFACE_MODE_RGMII_ID
and PHY_INTERFACE_MODE_RGMII_TXID.
Additionally we now explicity disable the TX-delay, which seems to be
enabled automatically after a hard-reset of the PHY (by triggering it's
reset pin) to get a consistent state (as defined by the phy-mode).
This fixes a compatibility problem with some SoCs where the TX-delay was
also added by the MAC. With the TX-delay being applied twice the TX
clock was off and TX traffic was broken or very slow (<10Mbit/s) on
1000Mbit/s links.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Blumenstingl [Fri, 25 Nov 2016 13:12:00 +0000 (14:12 +0100)]
Documentation: devicetree: clarify usage of the RGMII phy-modes
RGMII requires special RX and/or TX delays depending on the actual
hardware circuit/wiring. These delays can be added by the MAC, the PHY
or the designer of the circuit (the latter means that no delay has to
be added by PHY or MAC).
There are 4 RGMII phy-modes used describe where a delay should be
applied:
- rgmii: the RX and TX delays are either added by the MAC (where the
exact delay is typically configurable, and can be turned off when no
extra delay is needed) or not needed at all (because the hardware
wiring adds the delay already). The PHY should neither add the RX nor
TX delay in this case.
- rgmii-rxid: configures the PHY to enable the RX delay. The MAC should
not add the RX delay in this case.
- rgmii-txid: configures the PHY to enable the TX delay. The MAC should
not add the TX delay in this case.
- rgmii-id: combines rgmii-rxid and rgmii-txid and thus configures the
PHY to enable the RX and TX delays. The MAC should neither add the RX
nor TX delay in this case.
Document these cases in the ethernet.txt documentation to make it clear
when to use each mode.
If applied incorrectly one might end up with MAC and PHY both enabling
for example the TX delay, which breaks ethernet TX traffic on 1000Mbit/s
links.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Sun, 27 Nov 2016 00:18:01 +0000 (01:18 +0100)]
net, sched: respect rcu grace period on cls destruction
Roi reported a crash in flower where tp->root was NULL in ->classify()
callbacks. Reason is that in ->destroy() tp->root is set to NULL via
RCU_INIT_POINTER(). It's problematic for some of the classifiers, because
this doesn't respect RCU grace period for them, and as a result, still
outstanding readers from tc_classify() will try to blindly dereference
a NULL tp->root.
The tp->root object is strictly private to the classifier implementation
and holds internal data the core such as tc_ctl_tfilter() doesn't know
about. Within some classifiers, such as cls_bpf, cls_basic, etc, tp->root
is only checked for NULL in ->get() callback, but nowhere else. This is
misleading and seemed to be copied from old classifier code that was not
cleaned up properly. For example,
d3fa76ee6b4a ("[NET_SCHED]: cls_basic:
fix NULL pointer dereference") moved tp->root initialization into ->init()
routine, where before it was part of ->change(), so ->get() had to deal
with tp->root being NULL back then, so that was indeed a valid case, after
d3fa76ee6b4a, not really anymore. We used to set tp->root to NULL long
ago in ->destroy(), see
47a1a1d4be29 ("pkt_sched: remove unnecessary xchg()
in packet classifiers"); but the NULLifying was reintroduced with the
RCUification, but it's not correct for every classifier implementation.
In the cases that are fixed here with one exception of cls_cgroup, tp->root
object is allocated and initialized inside ->init() callback, which is always
performed at a point in time after we allocate a new tp, which means tp and
thus tp->root was not globally visible in the tp chain yet (see tc_ctl_tfilter()).
Also, on destruction tp->root is strictly kfree_rcu()'ed in ->destroy()
handler, same for the tp which is kfree_rcu()'ed right when we return
from ->destroy() in tcf_destroy(). This means, the head object's lifetime
for such classifiers is always tied to the tp lifetime. The RCU callback
invocation for the two kfree_rcu() could be out of order, but that's fine
since both are independent.
Dropping the RCU_INIT_POINTER(tp->root, NULL) for these classifiers here
means that 1) we don't need a useless NULL check in fast-path and, 2) that
outstanding readers of that tp in tc_classify() can still execute under
respect with RCU grace period as it is actually expected.
Things that haven't been touched here: cls_fw and cls_route. They each
handle tp->root being NULL in ->classify() path for historic reasons, so
their ->destroy() implementation can stay as is. If someone actually
cares, they could get cleaned up at some point to avoid the test in fast
path. cls_u32 doesn't set tp->root to NULL. For cls_rsvp, I just added a
!head should anyone actually be using/testing it, so it at least aligns with
cls_fw and cls_route. For cls_flower we additionally need to defer rhashtable
destruction (to a sleepable context) after RCU grace period as concurrent
readers might still access it. (Note that in this case we need to hold module
reference to keep work callback address intact, since we only wait on module
unload for all call_rcu()s to finish.)
This fixes one race to bring RCU grace period guarantees back. Next step
as worked on by Cong however is to fix
1e052be69d04 ("net_sched: destroy
proto tp when all filters are gone") to get the order of unlinking the tp
in tc_ctl_tfilter() for the RTM_DELTFILTER case right by moving
RCU_INIT_POINTER() before tcf_destroy() and let the notification for
removal be done through the prior ->delete() callback. Both are independant
issues. Once we have that right, we can then clean tp->root up for a number
of classifiers by not making them RCU pointers, which requires a new callback
(->uninit) that is triggered from tp's RCU callback, where we just kfree()
tp->root from there.
Fixes:
1f947bf151e9 ("net: sched: rcu'ify cls_bpf")
Fixes:
9888faefe132 ("net: sched: cls_basic use RCU")
Fixes:
70da9f0bf999 ("net: sched: cls_flow use RCU")
Fixes:
77b9900ef53a ("tc: introduce Flower classifier")
Fixes:
bf3994d2ed31 ("net/sched: introduce Match-all classifier")
Fixes:
952313bd6258 ("net: sched: cls_cgroup use RCU")
Reported-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Roi Dayan <roid@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Fri, 25 Nov 2016 15:35:02 +0000 (10:35 -0500)]
tipc: fix link statistics counter errors
In commit
e4bf4f76962b ("tipc: simplify packet sequence number
handling") we changed the internal representation of the packet
sequence number counters from u32 to u16, reflecting what is really
sent over the wire.
Since then some link statistics counters have been displaying incorrect
values, partially because the counters meant to be used as sequence
number snapshots are now used as direct counters, stored as u32, and
partially because some counter updates are just missing in the code.
In this commit we correct this in two ways. First, we base the
displayed packet sent/received values on direct counters instead
of as previously a calculated difference between current sequence
number and a snapshot. Second, we add the missing updates of the
counters.
This change is compatible with the current netlink API, and requires
no changes to the user space tools.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 28 Nov 2016 01:21:48 +0000 (20:21 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2016-11-25
1) Fix a refcount leak in vti6.
From Nicolas Dichtel.
2) Fix a wrong if statement in xfrm_sk_policy_lookup.
From Florian Westphal.
3) The flowcache watermarks are per cpu. Take this into
account when comparing to the threshold where we
refusing new allocations. From Miroslav Urbanek.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Fri, 25 Nov 2016 02:05:06 +0000 (10:05 +0800)]
driver: macvtap: Unregister netdev rx_handler if macvtap_newlink fails
The macvtap_newlink registers the netdev rx_handler firstly, but it
does not unregister the handler if macvlan_common_newlink failed.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 28 Nov 2016 01:01:16 +0000 (20:01 -0500)]
Merge branch 'more-phydev-leaks'
Johan Hovold says:
====================
net: fix phydev reference leaks
This series fixes a number of phydev reference leaks (and one of_node
leak) due to failure to put the reference taken by of_phy_find_device().
Note that I did not try to fix drivers/net/phy/xilinx_gmii2rgmii.c which
still leaks a reference.
Against net but should apply just as fine to net-next.
v2:
- use put_device() instead of phy_dev_free() to put the references
taken in net/dsa (patch 1/4).
- add four new patches fixing similar leaks
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Thu, 24 Nov 2016 18:21:31 +0000 (19:21 +0100)]
net: qcom/emac: fix of_node and phydev leaks
Make sure to drop the reference taken by of_phy_find_device() during
probe on probe errors and on driver unbind.
Also drop the of_node reference taken by of_parse_phandle() in the same
path.
Fixes:
b9b17debc69d ("net: emac: emac gigabit ethernet controller driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Thu, 24 Nov 2016 18:21:30 +0000 (19:21 +0100)]
net: fsl/fman: fix fixed-link-phydev reference leak
Make sure to drop the reference taken by of_phy_find_device() when
looking up a fixed-link phydev during probe.
Fixes:
57ba4c9b56d8 ("fsl/fman: Add FMan MAC support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Thu, 24 Nov 2016 18:21:29 +0000 (19:21 +0100)]
net: fsl/fman: fix phydev reference leak
Make sure to drop the reference taken by of_phy_find_device() during
initialisation when later freeing the struct fman_mac.
Fixes:
57ba4c9b56d8 ("fsl/fman: Add FMan MAC support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Thu, 24 Nov 2016 18:21:28 +0000 (19:21 +0100)]
net: bcmgenet: fix phydev reference leak
Make sure to drop the reference taken by of_phy_find_device() when
initialising MOCA PHYs.
Fixes:
6ac9de5f6563 ("net: bcmgenet: Register link_update callback for
all MoCA PHYs")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Thu, 24 Nov 2016 18:21:27 +0000 (19:21 +0100)]
net: dsa: fix fixed-link-phy device leaks
Make sure to drop the reference taken by of_phy_find_device() when
registering and deregistering the fixed-link PHY-device.
Fixes:
39b0c705195e ("net: dsa: Allow configuration of CPU & DSA port
speeds/duplex")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Thu, 24 Nov 2016 16:26:22 +0000 (17:26 +0100)]
irda: fix overly long udelay()
irda_get_mtt() returns a hardcoded '10000' in some cases,
and with gcc-7, we get a build error because this triggers a
compile-time check in udelay():
drivers/net/irda/w83977af_ir.o: In function `w83977af_hard_xmit':
w83977af_ir.c:(.text.w83977af_hard_xmit+0x14c): undefined reference to `__bad_udelay'
Older compilers did not run into this because they either did not
completely inline the irda_get_mtt() or did not consider the
10000 value a constant expression.
The code has been wrong since the start of git history.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Thu, 24 Nov 2016 15:39:59 +0000 (23:39 +0800)]
driver: ipvlan: Fix one possible memleak in ipvlan_link_new
When ipvlan_link_new fails and creates one ipvlan port, it does not
destroy the ipvlan port created. It causes mem leak and the physical
device contains invalid ipvlan data.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 27 Nov 2016 01:21:13 +0000 (17:21 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs splice fix from Al Viro.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix default_file_splice_read()
Al Viro [Sun, 27 Nov 2016 01:05:42 +0000 (20:05 -0500)]
fix default_file_splice_read()
Botched calculation of number of pages. As the result,
we were dropping pieces when doing splice to pipe from
e.g. 9p.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sat, 26 Nov 2016 23:28:34 +0000 (15:28 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Here is a revert and two bugfixes for the I2C designware driver.
Please note that we are still hunting down a regression for the
i2c-octeon driver. While there is a fix pending, we have unclear
feedback from the testers currently. An rc8 would be quite helpful
for this case"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: designware: do not disable adapter after transfer"
i2c: designware: fix rx fifo depth tracking
i2c: designware: report short transfers
Linus Torvalds [Sat, 26 Nov 2016 23:26:20 +0000 (15:26 -0800)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fix from Russell King:
"This resolves the ksyms issues by reverting the commit which
introduced the breakage"
There was what I consider to be a better fix, but it's late in the rc
game, so I'll take the revert.
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
Revert "arm: move exports to definitions"
Linus Torvalds [Sat, 26 Nov 2016 21:05:05 +0000 (13:05 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix leak in fsl/fman driver, from Dan Carpenter.
2) Call flow dissector initcall earlier than any networking driver can
register and start to use it, from Eric Dumazet.
3) Some dup header fixes from Geliang Tang.
4) TIPC link monitoring compat fix from Jon Paul Maloy.
5) Link changes require EEE re-negotiation in bcm_sf2 driver, from
Florian Fainelli.
6) Fix bogus handle ID passed into tfilter_notify_chain(), from Roman
Mashak.
7) Fix dump size calculation in rtnl_calcit(), from Zhang Shengju.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
tipc: resolve connection flow control compatibility problem
mvpp2: use correct size for memset
net/mlx5: drop duplicate header delay.h
net: ieee802154: drop duplicate header delay.h
ibmvnic: drop duplicate header seq_file.h
fsl/fman: fix a leak in tgec_free()
net: ethtool: don't require CAP_NET_ADMIN for ETHTOOL_GLINKSETTINGS
tipc: improve sanity check for received domain records
tipc: fix compatibility bug in link monitoring
net: ethernet: mvneta: Remove IFF_UNICAST_FLT which is not implemented
dwc_eth_qos: drop duplicate headers
net sched filters: fix filter handle ID in tfilter_notify_chain()
net: dsa: bcm_sf2: Ensure we re-negotiate EEE during after link change
bnxt: do not busy-poll when link is down
udplite: call proper backlog handlers
ipv6: bump genid when the IFA_F_TENTATIVE flag is clear
net/mlx4_en: Free netdev resources under state lock
net: revert "net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit"
rtnetlink: fix the wrong minimal dump size getting from rtnl_calcit()
bnxt_en: Fix a VXLAN vs GENEVE issue
...
Linus Torvalds [Sat, 26 Nov 2016 20:24:47 +0000 (12:24 -0800)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
- Fix a crash that occurs at driver initialization if the memory region
is already busy (request_mem_region() fails).
- Fix a vma validation check that mistakenly allows a private device-
dax mapping to be established. Device-dax explicitly forbids private
mappings so it can guarantee a given fault granularity and backing
memory type.
Both of these fixes have soaked in -next and are tagged for -stable.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: fail all private mapping attempts
device-dax: check devm_nsio_enable() return value
Linus Torvalds [Sat, 26 Nov 2016 20:18:59 +0000 (12:18 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"Four fixes for bugs found by syzkaller on x86, all for stable"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: check for pic and ioapic presence before use
KVM: x86: fix out-of-bounds accesses of rtc_eoi map
KVM: x86: drop error recovery in em_jmp_far and em_ret_far
KVM: x86: fix out-of-bounds access in lapic
Linus Torvalds [Sat, 26 Nov 2016 19:24:03 +0000 (11:24 -0800)]
Merge tag 'powerpc-4.9-6' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes marked for stable:
- Set missing wakeup bit in LPCR on POWER9
- Fix the early OPAL console wrappers
- Fixup kernel read only mapping
Fixes for code merged this cycle:
- Fix missing CRCs, add more asm-prototypes.h declarations"
* tag 'powerpc-4.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fixup kernel read only mapping
powerpc/boot: Fix the early OPAL console wrappers
powerpc: Fix missing CRCs, add more asm-prototypes.h declarations
powerpc: Set missing wakeup bit in LPCR on POWER9
Jon Paul Maloy [Thu, 24 Nov 2016 23:47:07 +0000 (18:47 -0500)]
tipc: resolve connection flow control compatibility problem
In commit
10724cc7bb78 ("tipc: redesign connection-level flow control")
we replaced the previous message based flow control with one based on
1k blocks. In order to ensure backwards compatibility the mechanism
falls back to using message as base unit when it senses that the peer
doesn't support the new algorithm. The default flow control window,
i.e., how many units can be sent before the sender blocks and waits
for an acknowledge (aka advertisement) is 512. This was tested against
the previous version, which uses an acknowledge frequency of on ack per
256 received message, and found to work fine.
However, we missed the fact that versions older than Linux 3.15 use an
acknowledge frequency of 512, which is exactly the limit where a 4.6+
sender will stop and wait for acknowledge. This would also work fine if
it weren't for the fact that if the first sent message on a 4.6+ server
side is an empty SYNACK, this one is also is counted as a sent message,
while it is not counted as a received message on a legacy 3.15-receiver.
This leads to the sender always being one step ahead of the receiver, a
scenario causing the sender to block after 512 sent messages, while the
receiver only has registered 511 read messages. Hence, the legacy
receiver is not trigged to send an acknowledge, with a permanently
blocked sender as result.
We solve this deadlock by simply allowing the sender to send one more
message before it blocks, i.e., by a making minimal change to the
condition used for determining connection congestion.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Thu, 24 Nov 2016 16:28:12 +0000 (17:28 +0100)]
mvpp2: use correct size for memset
gcc-7 detects a short memset in mvpp2, introduced in the original
merge of the driver:
drivers/net/ethernet/marvell/mvpp2.c: In function 'mvpp2_cls_init':
drivers/net/ethernet/marvell/mvpp2.c:3296:2: error: 'memset' used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size]
The result seems to be that we write uninitialized data into the
flow table registers, although we did not get any warning about
that uninitialized data usage.
Using sizeof() lets us initialize then entire array instead.
Fixes:
3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 24 Nov 2016 13:58:33 +0000 (21:58 +0800)]
net/mlx5: drop duplicate header delay.h
Drop duplicate header delay.h from mlx5/core/main.c.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Acked-by: Matan Barak <matanb@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 24 Nov 2016 13:58:32 +0000 (21:58 +0800)]
net: ieee802154: drop duplicate header delay.h
Drop duplicate header delay.h from
adf7242.c.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Acked-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 24 Nov 2016 13:58:29 +0000 (21:58 +0800)]
ibmvnic: drop duplicate header seq_file.h
Drop duplicate header seq_file.h from ibmvnic.c.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 24 Nov 2016 11:20:43 +0000 (14:20 +0300)]
fsl/fman: fix a leak in tgec_free()
We set "tgec->cfg" to NULL before passing it to kfree(). There is no
need to set it to NULL at all. Let's just delete it.
Fixes:
57ba4c9b56d8 ("fsl/fman: Add FMan MAC support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Miroslav Lichvar [Thu, 24 Nov 2016 09:55:06 +0000 (10:55 +0100)]
net: ethtool: don't require CAP_NET_ADMIN for ETHTOOL_GLINKSETTINGS
The ETHTOOL_GLINKSETTINGS command is deprecating the ETHTOOL_GSET
command and likewise it shouldn't require the CAP_NET_ADMIN capability.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 24 Nov 2016 04:46:09 +0000 (23:46 -0500)]
tipc: improve sanity check for received domain records
In commit
35c55c9877f8 ("tipc: add neighbor monitoring framework") we
added a data area to the link monitor STATE messages under the
assumption that previous versions did not use any such data area.
For versions older than Linux 4.3 this assumption is not correct. In
those version, all STATE messages sent out from a node inadvertently
contain a 16 byte data area containing a string; -a leftover from
previous RESET messages which were using this during the setup phase.
This string serves no purpose in STATE messages, and should no be there.
Unfortunately, this data area is delivered to the link monitor
framework, where a sanity check catches that it is not a correct domain
record, and drops it. It also issues a rate limited warning about the
event.
Since such events occur much more frequently than anticipated, we now
choose to remove the warning in order to not fill the kernel log with
useless contents. We also make the sanity check stricter, to further
reduce the risk that such data is inavertently admitted.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 24 Nov 2016 02:05:26 +0000 (21:05 -0500)]
tipc: fix compatibility bug in link monitoring
commit
817298102b0b ("tipc: fix link priority propagation") introduced a
compatibility problem between TIPC versions newer than Linux 4.6 and
those older than Linux 4.4. In versions later than 4.4, link STATE
messages only contain a non-zero link priority value when the sender
wants the receiver to change its priority. This has the effect that the
receiver resets itself in order to apply the new priority. This works
well, and is consistent with the said commit.
However, in versions older than 4.4 a valid link priority is present in
all sent link STATE messages, leading to cyclic link establishment and
reset on the 4.6+ node.
We fix this by adding a test that the received value should not only
be valid, but also differ from the current value in order to cause the
receiving link endpoint to reset.
Reported-by: Amar Nv <amar.nv005@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Wed, 23 Nov 2016 23:08:13 +0000 (00:08 +0100)]
net: ethernet: mvneta: Remove IFF_UNICAST_FLT which is not implemented
The mvneta driver advertises it supports IFF_UNICAST_FLT. However, it
actually does not. The hardware probably does support it, but there is
no code to configure the filter. As a quick and simple fix, remove the
flag. This will cause the core to fall back to promiscuous mode.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes:
b50b72de2f2f ("net: mvneta: enable features before registering the driver")
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 26 Nov 2016 00:47:15 +0000 (16:47 -0800)]
Merge branch 'parisc-4.9-4' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"On parisc we were still seeing occasional random segmentation faults
and memory corruption on SMP machines. Dave Anglin then looked again
at the TLB related code and found two issues in the PCI DMA and
generic TLB flush functions.
Then, in our startup code we had some timing of the cache and TLB
functions to calculate a threshold when to use a complete TLB/cache
flush or just to flush a specific range. This code produced a race
with newly started CPUs and thus lead to occasional kernel crashes
(due to stale TLB/cache entries). The patch by Dave fixes this issue
by flushing the local caches before starting secondary CPUs and by
removing the race.
The last problem fixed by this series is that we quite often suffered
from hung tasks and self-detected stalls on the CPUs. It was somehow
clear that this was related to the (in v4.7) newly introduced cr16
clocksource and the own implementation of sched_clock(). I replaced
the open-coded sched_clock() function and switched to the generic
sched_clock() implementation which seems to have fixed this isse as
well.
All patches have been sucessfully tested on a variety of machines,
including our debian buildd servers.
All patches (beside the small pr_cont fix) are tagged for stable
releases"
* 'parisc-4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Also flush data TLB in flush_icache_page_asm
parisc: Fix race in pci-dma.c
parisc: Switch to generic sched_clock implementation
parisc: Fix races in parisc_setup_cache_timing()
parisc: Fix printk continuations in system detection
Linus Torvalds [Fri, 25 Nov 2016 23:53:45 +0000 (15:53 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull keys fixes from James Morris:
"From David:
- Fix mpi_powm()'s handling of a number with a zero exponent
[CVE-2016-8650].
Integrate my and Andrey's patches for mpi_powm() and use
mpi_resize() instead of RESIZE_IF_NEEDED() - the latter adds a
duplicate check into the execution path of a trivial case we
don't normally expect to be taken.
- Fix double free in X.509 error handling"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
mpi: Fix NULL ptr dereference in mpi_powm() [ver #3]
X.509: Fix double free in x509_cert_parse() [ver #3]
Linus Torvalds [Fri, 25 Nov 2016 23:44:47 +0000 (15:44 -0800)]
Fix subtle CONFIG_MODVERSIONS problems
CONFIG_MODVERSIONS has been broken for pretty much the whole 4.9 series,
and quite frankly, nobody has cared very deeply. We absolutely know how
to fix it, and it's not _complicated_, but it's not exactly pretty
either.
This oneliner fixes it without the ugliness, and allows for further
future cleanups.
"We've secretly replaced their regular MODVERSIONS with nothing at
all, let's see if they notice"
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 25 Nov 2016 23:16:51 +0000 (15:16 -0800)]
Merge tag 'acpi-4.9-rc7' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Two ACPI fixes for 4.9-rc7.
One of them reverts a recent ACPI commit that attempted to improve
reboot/power-off on some systems, but introduced problems elsewhere,
and the other one fixes kernel builds with the new WDAT watchdog
driver enabled in some configurations.
Specifics:
- Revert the recent commit that caused the ACPI _PTS method to be
executed in the power-off/reboot code path (as per the
specification) in an attempt to improve things on some systems
(apparently expecting _PTS to be executed in that code path), but
broke power-off/reboot on at least one other machine (Rafael
Wysocki).
- Fix kernel builds with the new WDAT watchdog driver enabled in some
configurations by explicitly selecting WATCHDOG_CORE when enabling
the WDAT watchdog driver (Mika Westerberg)"
* tag 'acpi-4.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
watchdog: wdat_wdt: Select WATCHDOG_CORE
Revert "ACPI: Execute _PTS before system reboot"
Rafael J. Wysocki [Thu, 24 Nov 2016 23:13:56 +0000 (00:13 +0100)]
MAINTAINERS: Add bug tracking system location entry type
Following the kernel Bugzilla discussion during the Kernel Summit
(https://lwn.net/Articles/705245/), add bug tracking system location
entry type (B) to MAINTAINERS and populate it for several subsystems
known to be using the kernel BZ actively (and add the upstream BZ for
ACPICA too).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jarkko Nikula [Fri, 25 Nov 2016 15:22:27 +0000 (17:22 +0200)]
Revert "i2c: designware: do not disable adapter after transfer"
This reverts commit
0317e6c0f1dc1ba86b8d9dccc010c5e77b8355fa.
Srinivas reported recently touchscreen and touchpad stopped working in
Haswell based machine in Linux 4.9-rc series with timeout errors from
i2c_designware:
[ 16.508013] i2c_designware INT33C3:00: controller timed out
[ 16.508302] i2c_hid i2c-MSFT0001:02: failed to change power setting.
[ 17.532016] i2c_designware INT33C3:00: controller timed out
[ 18.556022] i2c_designware INT33C3:00: controller timed out
[ 18.556315] i2c_hid i2c-ATML1000:00: failed to retrieve report from device.
I managed to reproduce similar errors on another Haswell based machine
where touchscreen initialization fails maybe in every 1/5 - 1/2 boots.
Since root cause for these errors is not clear yet and debugging is
ongoing it's better to revert this commit as we are near to release.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Rafael J. Wysocki [Fri, 25 Nov 2016 21:24:07 +0000 (22:24 +0100)]
Merge branches 'acpi-sleep-fixes' and 'acpi-wdat-fixes'
* acpi-sleep-fixes:
Revert "ACPI: Execute _PTS before system reboot"
* acpi-wdat-fixes:
watchdog: wdat_wdt: Select WATCHDOG_CORE
David S. Miller [Fri, 25 Nov 2016 21:17:12 +0000 (16:17 -0500)]
Merge tag 'linux-can-fixes-for-4.9-
20161123' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2016-11-23
this is a pull request for net/master.
The patch by Oliver Hartkopp for the broadcast manager (bcm) fixes the
CAN-FD support, which may cause an out-of-bounds access otherwise.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Wed, 23 Nov 2016 14:24:35 +0000 (22:24 +0800)]
dwc_eth_qos: drop duplicate headers
Drop duplicate headers types.h and delay.h from dwc_eth_qos.c.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 25 Nov 2016 19:36:35 +0000 (11:36 -0800)]
Merge tag 'mfd-fixes-4.9.1' of git://git./linux/kernel/git/lee/mfd
Pull MFD fixes from Lee Jones:
"Received a copule of last minute fixes for v4.9.
The patches from Viresh are fixing issues displayed in KernelCI"
* tag 'mfd-fixes-4.9.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: wm8994-core: Don't use managed regulator bulk get API
mfd: wm8994-core: Disable regulators before removing them
mfd: syscon: Support native-endian regmaps
Linus Torvalds [Fri, 25 Nov 2016 19:31:01 +0000 (11:31 -0800)]
Merge tag 'media/v4.9-4' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
"Fix for the firmware load logic of the tuner-xc2028 driver"
* tag 'media/v4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
xc2028: Fix use-after-free bug properly
Linus Torvalds [Fri, 25 Nov 2016 18:51:35 +0000 (10:51 -0800)]
Merge tag 'drm-fixes-for-v4.9-rc7' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Seems to be quietening down nicely, a few mediatek, one exynos and one
hdlcd fix, along with two amd fixes"
* tag 'drm-fixes-for-v4.9-rc7' of git://people.freedesktop.org/~airlied/linux:
gpu/drm/exynos/exynos_hdmi - Unmap region obtained by of_iomap
drm/mediatek: fix null pointer dereference
drm/mediatek: fixed the calc method of data rate per lane
drm/mediatek: fix a typo of DISP_OD_CFG to OD_RELAYMODE
drm/radeon: fix power state when port pm is unavailable (v2)
drm/amdgpu: fix power state when port pm is unavailable
drm/arm: hdlcd: fix plane base address update
drm/amd/powerplay: avoid out of bounds access on array ps.
John David Anglin [Fri, 25 Nov 2016 01:18:14 +0000 (20:18 -0500)]
parisc: Also flush data TLB in flush_icache_page_asm
This is the second issue I noticed in reviewing the parisc TLB code.
The fic instruction may use either the instruction or data TLB in
flushing the instruction cache. Thus, on machines with a split TLB, we
should also flush the data TLB after setting up the temporary alias
registers.
Although this has no functional impact, I changed the pdtlb and pitlb
instructions to consistently use the index register %r0. These
instructions do not support integer displacements.
Tested on rp3440 and c8000.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Helge Deller <deller@gmx.de>
John David Anglin [Fri, 25 Nov 2016 01:06:32 +0000 (20:06 -0500)]
parisc: Fix race in pci-dma.c
We are still troubled by occasional random segmentation faults and
memory memory corruption on SMP machines. The causes quite a few
package builds to fail on the Debian buildd machines for parisc. When
gcc-6 failed to build three times in a row, I looked again at the TLB
related code. I found a couple of issues. This is the first.
In general, we need to ensure page table updates and corresponding TLB
purges are atomic. The attached patch fixes an instance in pci-dma.c
where the page table update was not guarded by the TLB lock.
Tested on rp3440 and c8000. So far, no further random segmentation
faults have been observed.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Helge Deller <deller@gmx.de>
Helge Deller [Tue, 22 Nov 2016 17:08:30 +0000 (18:08 +0100)]
parisc: Switch to generic sched_clock implementation
Drop the open-coded sched_clock() function and replace it by the provided
GENERIC_SCHED_CLOCK implementation. We have seen quite some hung tasks in the
past, which seem to be fixed by this patch.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Helge Deller <deller@gmx.de>
John David Anglin [Mon, 21 Nov 2016 02:12:36 +0000 (21:12 -0500)]
parisc: Fix races in parisc_setup_cache_timing()
Helge reported to me the following startup crash:
[ 0.000000] Linux version 4.8.0-1-parisc64-smp (debian-kernel@lists.debian.org) (gcc version 5.4.1
20161019 (GCC) ) #1 SMP Debian 4.8.7-1 (2016-11-13)
[ 0.000000] The 64-bit Kernel has started...
[ 0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1 MB physical and 2 MB virtual size.
[ 0.000000] Determining PDC firmware type: System Map.
[ 0.000000] model 9000/785/J5000
[ 0.000000] Total Memory: 2048 MB
[ 0.000000] Memory: 2018528K/2097152K available (9272K kernel code, 3053K rwdata, 1319K rodata, 1024K init, 840K bss, 78624K reserved, 0K cma-reserved)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB)
[ 0.000000] memory : 0x0000000040000000 - 0x00000000c0000000 (2048 MB)
[ 0.000000] .init : 0x0000000040100000 - 0x0000000040200000 (1024 kB)
[ 0.000000] .data : 0x0000000040b0e000 - 0x0000000040f533e0 (4372 kB)
[ 0.000000] .text : 0x0000000040200000 - 0x0000000040b0e000 (9272 kB)
[ 0.768910] Brought up 1 CPUs
[ 0.992465] NET: Registered protocol family 16
[ 2.429981] Releasing cpu 1 now, hpa=
fffffffffffa2000
[ 2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online
[ 2.726692] Setting cache flush threshold to 1024 kB
[ 2.729932] Not-handled unaligned insn 0x43ffff80
[ 2.798114] Setting TLB flush threshold to 140 kB
[ 2.928039] Unaligned handler failed, ret = -1
[ 3.000419] _______________________________
[ 3.000419] < Your System ate a SPARC! Gah! >
[ 3.000419] -------------------------------
[ 3.000419] \ ^__^
[ 3.000419] (__)\ )\/\
[ 3.000419] U ||----w |
[ 3.000419] || ||
[ 9.340055] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1
[ 9.448082] task:
00000000bfd48060 task.stack:
00000000bfd50000
[ 9.528040]
[ 10.760029] IASQ:
0000000000000000 0000000000000000 IAOQ:
000000004025d154 000000004025d158
[ 10.868052] IIR:
43ffff80 ISR:
0000000000340000 IOR:
000001ff54150960
[ 10.960029] CPU: 1 CR30:
00000000bfd50000 CR31:
0000000011111111
[ 11.052057] ORIG_R28:
000000004021e3b4
[ 11.100045] IAOQ[0]: irq_exit+0x94/0x120
[ 11.152062] IAOQ[1]: irq_exit+0x98/0x120
[ 11.208031] RP(r2): irq_exit+0xb8/0x120
[ 11.256074] Backtrace:
[ 11.288067] [<
00000000402cd944>] cpu_startup_entry+0x1e4/0x598
[ 11.368058] [<
0000000040109528>] smp_callin+0x2c0/0x2f0
[ 11.436308] [<
00000000402b53fc>] update_curr+0x18c/0x2d0
[ 11.508055] [<
00000000402b73b8>] dequeue_entity+0x2c0/0x1030
[ 11.584040] [<
00000000402b3cc0>] set_next_entity+0x80/0xd30
[ 11.660069] [<
00000000402c1594>] pick_next_task_fair+0x614/0x720
[ 11.740085] [<
000000004020dd34>] __schedule+0x394/0xa60
[ 11.808054] [<
000000004020e488>] schedule+0x88/0x118
[ 11.876039] [<
0000000040283d3c>] rescuer_thread+0x4d4/0x5b0
[ 11.948090] [<
000000004028fc4c>] kthread+0x1ec/0x248
[ 12.016053] [<
0000000040205020>] end_fault_vector+0x20/0xc0
[ 12.092239] [<
00000000402050c0>] _switch_to_ret+0x0/0xf40
[ 12.164044]
[ 12.184036] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1
[ 12.244040] Backtrace:
[ 12.244040] [<
000000004021c480>] show_stack+0x68/0x80
[ 12.244040] [<
00000000406f332c>] dump_stack+0xec/0x168
[ 12.244040] [<
000000004021c74c>] die_if_kernel+0x25c/0x430
[ 12.244040] [<
000000004022d320>] handle_unaligned+0xb48/0xb50
[ 12.244040]
[ 12.632066] ---[ end trace
9ca05a7215c7bbb2 ]---
[ 12.692036] Kernel panic - not syncing: Attempted to kill the idle task!
We have the insn 0x43ffff80 in IIR but from IAOQ we should have:
4025d150: 0f f3 20 df ldd,s r19(r31),r31
4025d154: 0f 9f 00 9c ldw r31(ret0),ret0
4025d158: bf 80 20 58 cmpb,*<> r0,ret0,
4025d18c <irq_exit+0xcc>
Cpu0 has just completed running parisc_setup_cache_timing:
[ 2.429981] Releasing cpu 1 now, hpa=
fffffffffffa2000
[ 2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online
[ 2.726692] Setting cache flush threshold to 1024 kB
[ 2.729932] Not-handled unaligned insn 0x43ffff80
[ 2.798114] Setting TLB flush threshold to 140 kB
[ 2.928039] Unaligned handler failed, ret = -1
From the backtrace, cpu1 is in smp_callin:
void __init smp_callin(void)
{
int slave_id = cpu_now_booting;
smp_cpu_init(slave_id);
preempt_disable();
flush_cache_all_local(); /* start with known state */
flush_tlb_all_local(NULL);
local_irq_enable(); /* Interrupts have been off until now */
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
So, it has just flushed its caches and the TLB. It would seem either the
flushes in parisc_setup_cache_timing or smp_callin have corrupted kernel
memory.
The attached patch reworks parisc_setup_cache_timing to remove the races
in setting the cache and TLB flush thresholds. It also corrects the
number of bytes flushed in the TLB calculation.
The patch flushes the cache and TLB on cpu0 before starting the
secondary processors so that they are started from a known state.
Tested with a few reboots on c8000.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # v3.18+
Signed-off-by: Helge Deller <deller@gmx.de>
Viresh Kumar [Thu, 27 Oct 2016 10:20:18 +0000 (15:50 +0530)]
mfd: wm8994-core: Don't use managed regulator bulk get API
The kernel WARNs and then crashes today if wm8994_device_init() fails
after calling devm_regulator_bulk_get().
That happens because there are multiple devices involved here and the
order in which managed resources are freed isn't correct.
The regulators are added as children of wm8994->dev. Whereas,
devm_regulator_bulk_get() receives wm8994->dev as the device, though it
gets the same regulators which were added as children of wm8994->dev
earlier.
During failures, the children are removed first and the core eventually
calls regulator_unregister() for them. As regulator_put() was never done
for them (opposite of devm_regulator_bulk_get()), the kernel WARNs at
WARN_ON(rdev->open_count);
And eventually it crashes from debugfs_remove_recursive().
--------x------------------x----------------
wm8994 3-001a: Device is not a WM8994, ID is 0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at /mnt/ssd/all/work/repos/devel/linux/drivers/regulator/core.c:4072 regulator_unregister+0xc8/0xd0
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted
4.8.0-rc6-00154-g54fe84cbd50b #41
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<
c010e24c>] (unwind_backtrace) from [<
c010af38>] (show_stack+0x10/0x14)
[<
c010af38>] (show_stack) from [<
c032a1c4>] (dump_stack+0x88/0x9c)
[<
c032a1c4>] (dump_stack) from [<
c011a98c>] (__warn+0xe8/0x100)
[<
c011a98c>] (__warn) from [<
c011aa54>] (warn_slowpath_null+0x20/0x28)
[<
c011aa54>] (warn_slowpath_null) from [<
c0384a0c>] (regulator_unregister+0xc8/0xd0)
[<
c0384a0c>] (regulator_unregister) from [<
c0406434>] (release_nodes+0x16c/0x1dc)
[<
c0406434>] (release_nodes) from [<
c04039c4>] (__device_release_driver+0x8c/0x110)
[<
c04039c4>] (__device_release_driver) from [<
c0403a64>] (device_release_driver+0x1c/0x28)
[<
c0403a64>] (device_release_driver) from [<
c0402b24>] (bus_remove_device+0xd8/0x104)
[<
c0402b24>] (bus_remove_device) from [<
c03ffcd8>] (device_del+0x10c/0x218)
[<
c03ffcd8>] (device_del) from [<
c0404e4c>] (platform_device_del+0x1c/0x88)
[<
c0404e4c>] (platform_device_del) from [<
c0404ec4>] (platform_device_unregister+0xc/0x20)
[<
c0404ec4>] (platform_device_unregister) from [<
c0428bc0>] (mfd_remove_devices_fn+0x5c/0x64)
[<
c0428bc0>] (mfd_remove_devices_fn) from [<
c03ff9d8>] (device_for_each_child_reverse+0x4c/0x78)
[<
c03ff9d8>] (device_for_each_child_reverse) from [<
c04288c4>] (mfd_remove_devices+0x20/0x30)
[<
c04288c4>] (mfd_remove_devices) from [<
c042758c>] (wm8994_device_init+0x2ac/0x7f0)
[<
c042758c>] (wm8994_device_init) from [<
c04f14a8>] (i2c_device_probe+0x178/0x1fc)
[<
c04f14a8>] (i2c_device_probe) from [<
c04036fc>] (driver_probe_device+0x214/0x2c0)
[<
c04036fc>] (driver_probe_device) from [<
c0403854>] (__driver_attach+0xac/0xb0)
[<
c0403854>] (__driver_attach) from [<
c0401a74>] (bus_for_each_dev+0x68/0x9c)
[<
c0401a74>] (bus_for_each_dev) from [<
c0402cf0>] (bus_add_driver+0x1a0/0x218)
[<
c0402cf0>] (bus_add_driver) from [<
c040406c>] (driver_register+0x78/0xf8)
[<
c040406c>] (driver_register) from [<
c04f20a0>] (i2c_register_driver+0x34/0x84)
[<
c04f20a0>] (i2c_register_driver) from [<
c01017d0>] (do_one_initcall+0x40/0x170)
[<
c01017d0>] (do_one_initcall) from [<
c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc)
[<
c0a00dbc>] (kernel_init_freeable) from [<
c06e07b0>] (kernel_init+0x8/0x114)
[<
c06e07b0>] (kernel_init) from [<
c0107978>] (ret_from_fork+0x14/0x3c)
---[ end trace
0919d3d0bc998260 ]---
[snip..]
Unable to handle kernel NULL pointer dereference at virtual address
00000078
pgd =
c0004000
[
00000078] *pgd=
00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
4.8.0-rc6-00154-g54fe84cbd50b #41
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
task:
ee874000 task.stack:
ee878000
PC is at down_write+0x14/0x54
LR is at debugfs_remove_recursive+0x30/0x150
[snip..]
[<
c06e489c>] (down_write) from [<
c02e9954>] (debugfs_remove_recursive+0x30/0x150)
[<
c02e9954>] (debugfs_remove_recursive) from [<
c0382b78>] (_regulator_put+0x24/0xac)
[<
c0382b78>] (_regulator_put) from [<
c0382c1c>] (regulator_put+0x1c/0x2c)
[<
c0382c1c>] (regulator_put) from [<
c0406434>] (release_nodes+0x16c/0x1dc)
[<
c0406434>] (release_nodes) from [<
c04035d4>] (driver_probe_device+0xec/0x2c0)
[<
c04035d4>] (driver_probe_device) from [<
c0403854>] (__driver_attach+0xac/0xb0)
[<
c0403854>] (__driver_attach) from [<
c0401a74>] (bus_for_each_dev+0x68/0x9c)
[<
c0401a74>] (bus_for_each_dev) from [<
c0402cf0>] (bus_add_driver+0x1a0/0x218)
[<
c0402cf0>] (bus_add_driver) from [<
c040406c>] (driver_register+0x78/0xf8)
[<
c040406c>] (driver_register) from [<
c04f20a0>] (i2c_register_driver+0x34/0x84)
[<
c04f20a0>] (i2c_register_driver) from [<
c01017d0>] (do_one_initcall+0x40/0x170)
[<
c01017d0>] (do_one_initcall) from [<
c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc)
[<
c0a00dbc>] (kernel_init_freeable) from [<
c06e07b0>] (kernel_init+0x8/0x114)
[<
c06e07b0>] (kernel_init) from [<
c0107978>] (ret_from_fork+0x14/0x3c)
Code:
e1a04000 f590f000 e3a03001 e34f3fff (
e1902f9f)
---[ end trace
0919d3d0bc998262 ]---
--------x------------------x----------------
Fix the kernel warnings and crashes by using regulator_bulk_get()
instead of devm_regulator_bulk_get() and explicitly freeing the supplies
in exit paths.
Tested on Exynos 5250, dual core ARM A15 machine.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Viresh Kumar [Fri, 16 Sep 2016 03:26:59 +0000 (08:56 +0530)]
mfd: wm8994-core: Disable regulators before removing them
The order in which resources were freed in wm8994_device_exit() isn't
correct. The regulators are removed before they are disabled.
Fix it by reordering code a bit, which makes it exact opposite of
wm8994_device_init() as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Paul Burton [Fri, 14 Oct 2016 09:17:31 +0000 (10:17 +0100)]
mfd: syscon: Support native-endian regmaps
The regmap devicetree binding documentation states that a native-endian
property should be supported as well as big-endian & little-endian,
however syscon in its duplication of the parsing of these properties
omits support for native-endian. Fix this by setting
REGMAP_ENDIAN_NATIVE when a native-endian property is found.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Dave Airlie [Fri, 25 Nov 2016 04:21:26 +0000 (14:21 +1000)]
Merge branch 'mediatek-drm-fixes-2016-11-24' of https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes
This branch include patches of fixing a typo, accurate dsi frame rate,
and fixing null pointer dereference.
* 'mediatek-drm-fixes-2016-11-24' of https://github.com/ckhu-mediatek/linux.git-tags:
drm/mediatek: fix null pointer dereference
drm/mediatek: fixed the calc method of data rate per lane
drm/mediatek: fix a typo of DISP_OD_CFG to OD_RELAYMODE
Aneesh Kumar K.V [Thu, 24 Nov 2016 09:39:54 +0000 (15:09 +0530)]
powerpc/mm: Fixup kernel read only mapping
With commit
e58e87adc8bf9 ("powerpc/mm: Update _PAGE_KERNEL_RO") we
started using the ppp value 0b110 to map kernel readonly. But that
facility was only added as part of ISA 2.04. For earlier ISA version
only supported ppp bit value for readonly mapping is 0b011. (This
implies both user and kernel get mapped using the same ppp bit value for
readonly mapping.).
Update the code such that for earlier architecture version we use ppp
value 0b011 for readonly mapping. We don't differentiate between power5+
and power5 here and apply the new ppp bits only from power6 (ISA 2.05).
This keep the changes minimal.
This fixes issue with PS3 spu usage reported at
https://lkml.kernel.org/r/rep.
1421449714.geoff@infradead.org
Fixes:
e58e87adc8bf9 ("powerpc/mm: Update _PAGE_KERNEL_RO")
Cc: stable@vger.kernel.org # v4.7+
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Andrey Ryabinin [Thu, 24 Nov 2016 13:23:10 +0000 (13:23 +0000)]
mpi: Fix NULL ptr dereference in mpi_powm() [ver #3]
This fixes CVE-2016-8650.
If mpi_powm() is given a zero exponent, it wants to immediately return
either 1 or 0, depending on the modulus. However, if the result was
initalised with zero limb space, no limbs space is allocated and a
NULL-pointer exception ensues.
Fix this by allocating a minimal amount of limb space for the result when
the 0-exponent case when the result is 1 and not touching the limb space
when the result is 0.
This affects the use of RSA keys and X.509 certificates that carry them.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<
ffffffff8138ce5d>] mpi_powm+0x32/0x7e6
PGD 0
Oops: 0002 [#1] SMP
Modules linked in:
CPU: 3 PID: 3014 Comm: keyctl Not tainted 4.9.0-rc6-fscache+ #278
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
task:
ffff8804011944c0 task.stack:
ffff880401294000
RIP: 0010:[<
ffffffff8138ce5d>] [<
ffffffff8138ce5d>] mpi_powm+0x32/0x7e6
RSP: 0018:
ffff880401297ad8 EFLAGS:
00010212
RAX:
0000000000000000 RBX:
ffff88040868bec0 RCX:
ffff88040868bba0
RDX:
ffff88040868b260 RSI:
ffff88040868bec0 RDI:
ffff88040868bee0
RBP:
ffff880401297ba8 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000047 R11:
ffffffff8183b210 R12:
0000000000000000
R13:
ffff8804087c7600 R14:
000000000000001f R15:
ffff880401297c50
FS:
00007f7a7918c700(0000) GS:
ffff88041fb80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000000 CR3:
0000000401250000 CR4:
00000000001406e0
Stack:
ffff88040868bec0 0000000000000020 ffff880401297b00 ffffffff81376cd4
0000000000000100 ffff880401297b10 ffffffff81376d12 ffff880401297b30
ffffffff81376f37 0000000000000100 0000000000000000 ffff880401297ba8
Call Trace:
[<
ffffffff81376cd4>] ? __sg_page_iter_next+0x43/0x66
[<
ffffffff81376d12>] ? sg_miter_get_next_page+0x1b/0x5d
[<
ffffffff81376f37>] ? sg_miter_next+0x17/0xbd
[<
ffffffff8138ba3a>] ? mpi_read_raw_from_sgl+0xf2/0x146
[<
ffffffff8132a95c>] rsa_verify+0x9d/0xee
[<
ffffffff8132acca>] ? pkcs1pad_sg_set_buf+0x2e/0xbb
[<
ffffffff8132af40>] pkcs1pad_verify+0xc0/0xe1
[<
ffffffff8133cb5e>] public_key_verify_signature+0x1b0/0x228
[<
ffffffff8133d974>] x509_check_for_self_signed+0xa1/0xc4
[<
ffffffff8133cdde>] x509_cert_parse+0x167/0x1a1
[<
ffffffff8133d609>] x509_key_preparse+0x21/0x1a1
[<
ffffffff8133c3d7>] asymmetric_key_preparse+0x34/0x61
[<
ffffffff812fc9f3>] key_create_or_update+0x145/0x399
[<
ffffffff812fe227>] SyS_add_key+0x154/0x19e
[<
ffffffff81001c2b>] do_syscall_64+0x80/0x191
[<
ffffffff816825e4>] entry_SYSCALL64_slow_path+0x25/0x25
Code: 56 41 55 41 54 53 48 81 ec a8 00 00 00 44 8b 71 04 8b 42 04 4c 8b 67 18 45 85 f6 89 45 80 0f 84 b4 06 00 00 85 c0 75 2f 41 ff ce <49> c7 04 24 01 00 00 00 b0 01 75 0b 48 8b 41 18 48 83 38 01 0f
RIP [<
ffffffff8138ce5d>] mpi_powm+0x32/0x7e6
RSP <
ffff880401297ad8>
CR2:
0000000000000000
---[ end trace
d82015255d4a5d8d ]---
Basically, this is a backport of a libgcrypt patch:
http://git.gnupg.org/cgi-bin/gitweb.cgi?p=libgcrypt.git;a=patch;h=
6e1adb05d290aeeb1c230c763970695f4a538526
Fixes:
cdec9cb5167a ("crypto: GnuPG based MPI lib - source files (part 1)")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
cc: linux-ima-devel@lists.sourceforge.net
cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
Andrey Ryabinin [Thu, 24 Nov 2016 13:23:03 +0000 (13:23 +0000)]
X.509: Fix double free in x509_cert_parse() [ver #3]
We shouldn't free cert->pub->key in x509_cert_parse() because
x509_free_certificate() also does this:
BUG: Double free or freeing an invalid pointer
...
Call Trace:
[<
ffffffff81896c20>] dump_stack+0x63/0x83
[<
ffffffff81356571>] kasan_object_err+0x21/0x70
[<
ffffffff81356ed9>] kasan_report_double_free+0x49/0x60
[<
ffffffff813561ad>] kasan_slab_free+0x9d/0xc0
[<
ffffffff81350b7a>] kfree+0x8a/0x1a0
[<
ffffffff81844fbf>] public_key_free+0x1f/0x30
[<
ffffffff818455d4>] x509_free_certificate+0x24/0x90
[<
ffffffff818460bc>] x509_cert_parse+0x2bc/0x300
[<
ffffffff81846cae>] x509_key_preparse+0x3e/0x330
[<
ffffffff818444cf>] asymmetric_key_preparse+0x6f/0x100
[<
ffffffff8178bec0>] key_create_or_update+0x260/0x5f0
[<
ffffffff8178e6d9>] SyS_add_key+0x199/0x2a0
[<
ffffffff821d823b>] entry_SYSCALL_64_fastpath+0x1e/0xad
Object at
ffff880110bd1900, in cache kmalloc-512 size: 512
....
Freed:
PID = 2579
[<
ffffffff8104283b>] save_stack_trace+0x1b/0x20
[<
ffffffff813558f6>] save_stack+0x46/0xd0
[<
ffffffff81356183>] kasan_slab_free+0x73/0xc0
[<
ffffffff81350b7a>] kfree+0x8a/0x1a0
[<
ffffffff818460a3>] x509_cert_parse+0x2a3/0x300
[<
ffffffff81846cae>] x509_key_preparse+0x3e/0x330
[<
ffffffff818444cf>] asymmetric_key_preparse+0x6f/0x100
[<
ffffffff8178bec0>] key_create_or_update+0x260/0x5f0
[<
ffffffff8178e6d9>] SyS_add_key+0x199/0x2a0
[<
ffffffff821d823b>] entry_SYSCALL_64_fastpath+0x1e/0xad
Fixes:
db6c43bd2132 ("crypto: KEYS: convert public key and digsig asym to the akcipher api")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
OSDN Git Service
