OSDN Git Service
Linux Build Service Account [Thu, 25 Oct 2018 20:30:25 +0000 (13:30 -0700)]
Merge "Merge android-4.4.162 (
3eb8e73) into msm-4.4"
Linux Build Service Account [Wed, 24 Oct 2018 20:57:44 +0000 (13:57 -0700)]
Merge "soc: qcom: Remove smp2p test support"
Linux Build Service Account [Tue, 23 Oct 2018 23:29:39 +0000 (16:29 -0700)]
Merge "soc: qcom: hab: add rx queue empty check after getting the lock"
Linux Build Service Account [Tue, 23 Oct 2018 13:53:29 +0000 (06:53 -0700)]
Merge "msm: ipa: Check ep empty before reset"
Hardik Arya [Wed, 10 Oct 2018 12:55:49 +0000 (18:25 +0530)]
soc: qcom: Remove smp2p test support
Smp2p test code is used internally to test the
functionality of drivers and has no real use case
in end product.
Change-Id: I7a50c077bb71068188b5411424c5782b3d0edbb7
Signed-off-by: Hardik Arya <harya@codeaurora.org>
Linux Build Service Account [Tue, 23 Oct 2018 06:01:48 +0000 (23:01 -0700)]
Merge "Merge android-4.4.161 (
8e7f196) into msm-4.4"
Linux Build Service Account [Tue, 23 Oct 2018 06:01:47 +0000 (23:01 -0700)]
Merge "coresight: fix handling of ETM management register access via sysfs"
Yong Ding [Wed, 17 Oct 2018 12:08:35 +0000 (20:08 +0800)]
soc: qcom: hab: add rx queue empty check after getting the lock
Need to do empty check again when we have the lock of the rx queue of
a given virtual channel. Without this check, it is possible that the
list head of the queue will be wrongly taken as a valid message node
if the valid message has already been fetched by some other thread.
Change-Id: I65f73acd86fe2fb709e2af2ffeaa42581b4168ca
Signed-off-by: Yong Ding <yongding@codeaurora.org>
Linux Build Service Account [Mon, 22 Oct 2018 22:22:18 +0000 (15:22 -0700)]
Merge "soc: qcom: audio: use global lock for single hab socket"
Linux Build Service Account [Mon, 22 Oct 2018 22:22:17 +0000 (15:22 -0700)]
Merge "ion: msm_ion: fix incorrect ion_buffer member assignment"
Linux Build Service Account [Mon, 22 Oct 2018 11:36:46 +0000 (04:36 -0700)]
Merge "cnss2: Update QMI files with cold cal data changes"
Srinivasarao P [Mon, 22 Oct 2018 08:29:43 +0000 (13:59 +0530)]
Merge android-4.4.162 (
3eb8e73) into msm-4.4
* refs/heads/tmp-
3eb8e73
Linux 4.4.162
HV: properly delay KVP packets when negotiation is in progress
Drivers: hv: kvp: fix IP Failover
Drivers: hv: util: Pass the channel information during the init call
Drivers: hv: utils: Invoke the poll function after handshake
usb: gadget: serial: fix oops when data rx'd after close
ARC: build: Get rid of toolchain check
powerpc/tm: Avoid possible userspace r1 corruption on reclaim
powerpc/tm: Fix userspace r13 corruption
net/mlx4: Use cpumask_available for eq->affinity_mask
Input: atakbd - fix Atari CapsLock behaviour
Input: atakbd - fix Atari keymap
clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs
media: af9035: prevent buffer overflow on write
x86/fpu: Finish excising 'eagerfpu'
x86/fpu: Remove struct fpu::counter
x86/fpu: Remove use_eager_fpu()
KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch
rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096
net: systemport: Fix wake-up interrupt race during resume
net: mvpp2: Extract the correct ethtype from the skb for tx csum offload
team: Forbid enslaving team device to itself
qlcnic: fix Tx descriptor corruption on 82xx devices
net/usb: cancel pending work when unbinding smsc75xx
netlabel: check for IPV4MASK in addrinfo_get
net/ipv6: Display all addresses in output of /proc/net/if_inet6
net: ipv4: update fnhe_pmtu when first hop's MTU changes
ipv4: fix use-after-free in ip_cmsg_recv_dstaddr()
ip_tunnel: be careful when accessing the inner header
ip6_tunnel: be careful when accessing the inner header
bonding: avoid possible dead-lock
bnxt_en: Fix TX timeout during netpoll.
jffs2: return -ERANGE when xattr buffer is too small
xhci: Don't print a warning when setting link state for disabled ports
i2c: i2c-scmi: fix for i2c_smbus_write_block_data
perf script python: Fix export-to-postgresql.py occasional failure
mach64: detect the dot clock divider correctly on sparc
mm/vmstat.c: fix outdated vmstat_text
ext4: add corruption check in ext4_xattr_set_entry()
drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7
ARM: dts: at91: add new compatibility string for macb on sama5d3
net: macb: disable scatter-gather for macb on sama5d3
stmmac: fix valid numbers of unicast filter entries
sound: enable interrupt after dma buffer initialization
mfd: omap-usb-host: Fix dts probe of children
selftests/efivarfs: add required kernel configs
ASoC: sigmadsp: safeload should not have lower byte limit
ASoC: wm8804: Add ACPI support
ANDROID: usb: gadget: f_mtp: Return error if count is negative
ANDROID: x86_64_cuttlefish_defconfig: disable CONFIG_MEMORY_STATE_TIME
Change-Id: Ie69fd3f90302d1ebe0c1217b46d8033fec4180a5
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
Erin Yan [Fri, 19 Oct 2018 06:18:06 +0000 (14:18 +0800)]
soc: qcom: audio: use global lock for single hab socket
Need use one global lock to prevent multiple threads visit single hab
socket at same time, as hab can't guarantee that the coming message is
received by the right thread.
Change-Id: I43eca3c1f7010c651612fff949b867e2269a2977
Signed-off-by: Erin Yan <xinyey@codeaurora.org>
Greg Kroah-Hartman [Sat, 20 Oct 2018 14:32:57 +0000 (16:32 +0200)]
Merge 4.4.162 into android-4.4
Changes in 4.4.162
ASoC: wm8804: Add ACPI support
ASoC: sigmadsp: safeload should not have lower byte limit
selftests/efivarfs: add required kernel configs
mfd: omap-usb-host: Fix dts probe of children
sound: enable interrupt after dma buffer initialization
stmmac: fix valid numbers of unicast filter entries
net: macb: disable scatter-gather for macb on sama5d3
ARM: dts: at91: add new compatibility string for macb on sama5d3
drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7
ext4: add corruption check in ext4_xattr_set_entry()
mm/vmstat.c: fix outdated vmstat_text
mach64: detect the dot clock divider correctly on sparc
perf script python: Fix export-to-postgresql.py occasional failure
i2c: i2c-scmi: fix for i2c_smbus_write_block_data
xhci: Don't print a warning when setting link state for disabled ports
jffs2: return -ERANGE when xattr buffer is too small
bnxt_en: Fix TX timeout during netpoll.
bonding: avoid possible dead-lock
ip6_tunnel: be careful when accessing the inner header
ip_tunnel: be careful when accessing the inner header
ipv4: fix use-after-free in ip_cmsg_recv_dstaddr()
net: ipv4: update fnhe_pmtu when first hop's MTU changes
net/ipv6: Display all addresses in output of /proc/net/if_inet6
netlabel: check for IPV4MASK in addrinfo_get
net/usb: cancel pending work when unbinding smsc75xx
qlcnic: fix Tx descriptor corruption on 82xx devices
team: Forbid enslaving team device to itself
net: mvpp2: Extract the correct ethtype from the skb for tx csum offload
net: systemport: Fix wake-up interrupt race during resume
rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096
KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch
x86/fpu: Remove use_eager_fpu()
x86/fpu: Remove struct fpu::counter
x86/fpu: Finish excising 'eagerfpu'
media: af9035: prevent buffer overflow on write
clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs
Input: atakbd - fix Atari keymap
Input: atakbd - fix Atari CapsLock behaviour
net/mlx4: Use cpumask_available for eq->affinity_mask
powerpc/tm: Fix userspace r13 corruption
powerpc/tm: Avoid possible userspace r1 corruption on reclaim
ARC: build: Get rid of toolchain check
usb: gadget: serial: fix oops when data rx'd after close
Drivers: hv: utils: Invoke the poll function after handshake
Drivers: hv: util: Pass the channel information during the init call
Drivers: hv: kvp: fix IP Failover
HV: properly delay KVP packets when negotiation is in progress
Linux 4.4.162
Change-Id: Ib44f3b764a6005a2891b28315b3dbfa3f6cedcb5
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Greg Kroah-Hartman [Sat, 20 Oct 2018 07:52:38 +0000 (09:52 +0200)]
Linux 4.4.162
Long Li [Sun, 30 Apr 2017 23:21:19 +0000 (16:21 -0700)]
HV: properly delay KVP packets when negotiation is in progress
commit
a3ade8cc474d848676278660e65f5af1e9e094d9 upstream.
The host may send multiple negotiation packets
(due to timeout) before the KVP user-mode daemon
is connected. KVP user-mode daemon is connected.
We need to defer processing those packets
until the daemon is negotiated and connected.
It's okay for guest to respond
to all negotiation packets.
In addition, the host may send multiple staged
KVP requests as soon as negotiation is done.
We need to properly process those packets using one
tasklet for exclusive access to ring buffer.
This patch is based on the work of
Nick Meier <Nick.Meier@microsoft.com>.
The above is the original changelog of
a3ade8cc474d ("HV: properly delay KVP packets when negotiation is in progress"
Here I re-worked the original patch because the mainline version
can't work for the linux-4.4.y branch, on which channel->callback_event
doesn't exist yet. In the mainline, channel->callback_event was added by:
631e63a9f346 ("vmbus: change to per channel tasklet"). Here we don't want
to backport it to v4.4, as it requires extra supporting changes and fixes,
which are unnecessary as to the KVP bug we're trying to resolve.
NOTE: before this patch is used, we should cherry-pick the other related
3 patches from the mainline first:
The background of this backport request is that: recently Wang Jian reported
some KVP issues: https://github.com/LIS/lis-next/issues/593:
e.g. the /var/lib/hyperv/.kvp_pool_* files can not be updated, and sometimes
if the hv_kvp_daemon doesn't timely start, the host may not be able to query
the VM's IP address via KVP.
Reported-by: Wang Jian <jianjian.wang1@gmail.com>
Tested-by: Wang Jian <jianjian.wang1@gmail.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Kuznetsov [Sun, 1 May 2016 02:21:33 +0000 (19:21 -0700)]
Drivers: hv: kvp: fix IP Failover
commit
4dbfc2e68004c60edab7e8fd26784383dd3ee9bc upstream.
Hyper-V VMs can be replicated to another hosts and there is a feature to
set different IP for replicas, it is called 'Failover TCP/IP'. When
such guest starts Hyper-V host sends it KVP_OP_SET_IP_INFO message as soon
as we finish negotiation procedure. The problem is that it can happen (and
it actually happens) before userspace daemon connects and we reply with
HV_E_FAIL to the message. As there are no repetitions we fail to set the
requested IP.
Solve the issue by postponing our reply to the negotiation message till
userspace daemon is connected. We can't wait too long as there is a
host-side timeout (cca. 75 seconds) and if we fail to reply in this time
frame the whole KVP service will become inactive. The solution is not
ideal - if it takes userspace daemon more than 60 seconds to connect
IP Failover will still fail but I don't see a solution with our current
separation between kernel and userspace parts.
Other two modules (VSS and FCOPY) don't require such delay, leave them
untouched.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
K. Y. Srinivasan [Fri, 26 Feb 2016 23:13:19 +0000 (15:13 -0800)]
Drivers: hv: util: Pass the channel information during the init call
commit
b9830d120cbe155863399f25eaef6aa8353e767f upstream.
Pass the channel information to the util drivers that need to defer
reading the channel while they are processing a request. This would address
the following issue reported by Vitaly:
Commit
3cace4a61610 ("Drivers: hv: utils: run polling callback always in
interrupt context") removed direct *_transaction.state = HVUTIL_READY
assignments from *_handle_handshake() functions introducing the following
race: if a userspace daemon connects before we get first non-negotiation
request from the server hv_poll_channel() won't set transaction state to
HVUTIL_READY as (!channel) condition will fail, we set it to non-NULL on
the first real request from the server.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
K. Y. Srinivasan [Tue, 15 Dec 2015 00:01:57 +0000 (16:01 -0800)]
Drivers: hv: utils: Invoke the poll function after handshake
commit
2d0c3b5ad739697a68dc8a444f5b9f4817cf8f8f upstream.
When the handshake with daemon is complete, we should poll the channel since
during the handshake, we will not be processing any messages. This is a
potential bug if the host is waiting for a response from the guest.
I would like to thank Dexuan for pointing this out.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Warren [Wed, 16 Aug 2017 20:30:10 +0000 (14:30 -0600)]
usb: gadget: serial: fix oops when data rx'd after close
commit
daa35bd95634a2a2d72d1049c93576a02711cb1a upstream.
When the gadget serial device has no associated TTY, do not pass any
received data into the TTY layer for processing; simply drop it instead.
This prevents the TTY layer from calling back into the gadget serial
driver, which will then crash in e.g. gs_write_room() due to lack of
gadget serial device to TTY association (i.e. a NULL pointer dereference).
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Brodkin [Thu, 13 Sep 2018 20:24:28 +0000 (23:24 +0300)]
ARC: build: Get rid of toolchain check
commit
615f64458ad890ef94abc879a66d8b27236e733a upstream.
This check is very naive: we simply test if GCC invoked without
"-mcpu=XXX" has ARC700 define set. In that case we think that GCC
was built with "--with-cpu=arc700" and has libgcc built for ARC700.
Otherwise if ARC700 is not defined we think that everythng was built
for ARCv2.
But in reality our life is much more interesting.
1. Regardless of GCC configuration (i.e. what we pass in "--with-cpu"
it may generate code for any ARC core).
2. libgcc might be built with explicitly specified "--mcpu=YYY"
That's exactly what happens in case of multilibbed toolchains:
- GCC is configured with default settings
- All the libs built for many different CPU flavors
I.e. that check gets in the way of usage of multilibbed
toolchains. And even non-multilibbed toolchains are affected.
OpenEmbedded also builds GCC without "--with-cpu" because
each and every target component later is compiled with explicitly
set "-mcpu=ZZZ".
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Neuling [Tue, 25 Sep 2018 09:36:47 +0000 (19:36 +1000)]
powerpc/tm: Avoid possible userspace r1 corruption on reclaim
[ Upstream commit
96dc89d526ef77604376f06220e3d2931a0bfd58 ]
Current we store the userspace r1 to PACATMSCRATCH before finally
saving it to the thread struct.
In theory an exception could be taken here (like a machine check or
SLB miss) that could write PACATMSCRATCH and hence corrupt the
userspace r1. The SLB fault currently doesn't touch PACATMSCRATCH, but
others do.
We've never actually seen this happen but it's theoretically
possible. Either way, the code is fragile as it is.
This patch saves r1 to the kernel stack (which can't fault) before we
turn MSR[RI] back on. PACATMSCRATCH is still used but only with
MSR[RI] off. We then copy r1 from the kernel stack to the thread
struct once we have MSR[RI] back on.
Suggested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Neuling [Mon, 24 Sep 2018 07:27:04 +0000 (17:27 +1000)]
powerpc/tm: Fix userspace r13 corruption
[ Upstream commit
cf13435b730a502e814c63c84d93db131e563f5f ]
When we treclaim we store the userspace checkpointed r13 to a scratch
SPR and then later save the scratch SPR to the user thread struct.
Unfortunately, this doesn't work as accessing the user thread struct
can take an SLB fault and the SLB fault handler will write the same
scratch SPRG that now contains the userspace r13.
To fix this, we store r13 to the kernel stack (which can't fault)
before we access the user thread struct.
Found by running P8 guest + powervm + disable_1tb_segments + TM. Seen
as a random userspace segfault with r13 looking like a kernel address.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Fri, 21 Sep 2018 09:44:12 +0000 (02:44 -0700)]
net/mlx4: Use cpumask_available for eq->affinity_mask
[ Upstream commit
8ac1ee6f4d62e781e3b3fd8b9c42b70371427669 ]
Clang warns that the address of a pointer will always evaluated as true
in a boolean context:
drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of
array 'eq->affinity_mask' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask))
~~~~~^~~~~~~~~~~~~
1 warning generated.
Use cpumask_available, introduced in commit
f7e30f01a9e2 ("cpumask: Add
helper cpumask_available()"), which does the proper checking and avoids
this warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/86
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Schmitz [Mon, 17 Sep 2018 22:27:49 +0000 (15:27 -0700)]
Input: atakbd - fix Atari CapsLock behaviour
[ Upstream commit
52d2c7bf7c90217fbe875d2d76f310979c48eb83 ]
The CapsLock key on Atari keyboards is not a toggle, it does send the
normal make and break scancodes.
Drop the CapsLock toggle handling code, which did cause the CapsLock
key to merely act as a Shift key.
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Schwab [Mon, 17 Sep 2018 19:43:34 +0000 (12:43 -0700)]
Input: atakbd - fix Atari keymap
[ Upstream commit
9e62df51be993035c577371ffee5477697a56aad ]
Fix errors in Atari keymap (mostly in keypad, help and undo keys).
Patch provided on debian-68k ML by Andreas Schwab <schwab@linux-m68k.org>,
keymap array size and unhandled scancode limit adjusted to 0x73 by me.
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keerthy [Wed, 8 Aug 2018 13:14:59 +0000 (18:44 +0530)]
clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs
[ Upstream commit
3b7d96a0dbb6b630878597a1838fc39f808b761b ]
The 32k clocksource is NONSTOP for non-am43 SoCs. Hence
add the flag for all the other SoCs.
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jozef Balga [Tue, 21 Aug 2018 09:01:04 +0000 (05:01 -0400)]
media: af9035: prevent buffer overflow on write
[ Upstream commit
312f73b648626a0526a3aceebb0a3192aaba05ce ]
When less than 3 bytes are written to the device, memcpy is called with
negative array size which leads to buffer overflow and kernel panic. This
patch adds a condition and returns -EOPNOTSUPP instead.
Fixes bugzilla issue 64871
[mchehab+samsung@kernel.org: fix a merge conflict and changed the
condition to match the patch's comment, e. g. len == 3 could
also be valid]
Signed-off-by: Jozef Balga <jozef.balga@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Mon, 17 Oct 2016 21:40:11 +0000 (14:40 -0700)]
x86/fpu: Finish excising 'eagerfpu'
commit
e63650840e8b053aa09ad934877e87e9941ed135 upstream.
Now that eagerfpu= is gone, remove it from the docs and some
comments. Also sync the changes to tools/.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/cf430dd4481d41280e93ac6cf0def1007a67fc8e.1476740397.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rik van Riel [Wed, 5 Oct 2016 00:34:34 +0000 (20:34 -0400)]
x86/fpu: Remove struct fpu::counter
commit
3913cc3507575273beb165a5e027a081913ed507 upstream.
With the lazy FPU code gone, we no longer use the counter field
in struct fpu for anything. Get rid it.
Signed-off-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: pbonzini@redhat.com
Link: http://lkml.kernel.org/r/1475627678-20788-6-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Wed, 5 Oct 2016 00:34:33 +0000 (20:34 -0400)]
x86/fpu: Remove use_eager_fpu()
commit
c592b57347069abfc0dcad3b3a302cf882602597 upstream.
This removes all the obvious code paths that depend on lazy FPU mode.
It shouldn't change the generated code at all.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: pbonzini@redhat.com
Link: http://lkml.kernel.org/r/1475627678-20788-5-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Tue, 8 Mar 2016 09:00:11 +0000 (10:00 +0100)]
KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch
commit
5a5fbdc0e3f1159a734f1890da60fce70e98271d upstream.
It is now equal to use_eager_fpu(), which simply tests a cpufeature bit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 2 Oct 2018 22:47:35 +0000 (15:47 -0700)]
rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096
[ Upstream commit
0e1d6eca5113858ed2caea61a5adc03c595f6096 ]
We have an impressive number of syzkaller bugs that are linked
to the fact that syzbot was able to create a networking device
with millions of TX (or RX) queues.
Let's limit the number of RX/TX queues to 4096, this really should
cover all known cases.
A separate patch will add various cond_resched() in the loops
handling sysfs entries at device creation and dismantle.
Tested:
lpaa6:~# ip link add gre-4097 numtxqueues 4097 numrxqueues 4097 type ip6gretap
RTNETLINK answers: Invalid argument
lpaa6:~# time ip link add gre-4096 numtxqueues 4096 numrxqueues 4096 type ip6gretap
real 0m0.180s
user 0m0.000s
sys 0m0.107s
Fixes:
76ff5cc91935 ("rtnl: allow to specify number of rx and tx queues on device creation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Tue, 2 Oct 2018 23:52:03 +0000 (16:52 -0700)]
net: systemport: Fix wake-up interrupt race during resume
[ Upstream commit
45ec318578c0c22a11f5b9927d064418e1ab1905 ]
The AON_PM_L2 is normally used to trigger and identify the source of a
wake-up event. Since the RX_SYS clock is no longer turned off, we also
have an interrupt being sent to the SYSTEMPORT INTRL_2_0 controller, and
that interrupt remains active up until the magic packet detector is
disabled which happens much later during the driver resumption.
The race happens if we have a CPU that is entering the SYSTEMPORT
INTRL2_0 handler during resume, and another CPU has managed to clear the
wake-up interrupt during bcm_sysport_resume_from_wol(). In that case, we
have the first CPU stuck in the interrupt handler with an interrupt
cause that has been cleared under its feet, and so we keep returning
IRQ_NONE and we never make any progress.
This was not a problem before because we would always turn off the
RX_SYS clock during WoL, so the SYSTEMPORT INTRL2_0 would also be turned
off as well, thus not latching the interrupt.
The fix is to make sure we do not enable either the MPD or
BRCM_TAG_MATCH interrupts since those are redundant with what the
AON_PM_L2 interrupt controller already processes and they would cause
such a race to occur.
Fixes:
bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER")
Fixes:
83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxime Chevallier [Fri, 5 Oct 2018 07:04:40 +0000 (09:04 +0200)]
net: mvpp2: Extract the correct ethtype from the skb for tx csum offload
[ Upstream commit
35f3625c21852ad839f20c91c7d81c4c1101e207 ]
When offloading the L3 and L4 csum computation on TX, we need to extract
the l3_proto from the ethtype, independently of the presence of a vlan
tag.
The actual driver uses skb->protocol as-is, resulting in packets with
the wrong L4 checksum being sent when there's a vlan tag in the packet
header and checksum offloading is enabled.
This commit makes use of vlan_protocol_get() to get the correct ethtype
regardless the presence of a vlan tag.
Fixes:
3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ido Schimmel [Mon, 1 Oct 2018 09:21:59 +0000 (12:21 +0300)]
team: Forbid enslaving team device to itself
[ Upstream commit
471b83bd8bbe4e89743683ef8ecb78f7029d8288 ]
team's ndo_add_slave() acquires 'team->lock' and later tries to open the
newly enslaved device via dev_open(). This emits a 'NETDEV_UP' event
that causes the VLAN driver to add VLAN 0 on the team device. team's
ndo_vlan_rx_add_vid() will also try to acquire 'team->lock' and
deadlock.
Fix this by checking early at the enslavement function that a team
device is not being enslaved to itself.
A similar check was added to the bond driver in commit
09a89c219baf
("bonding: disallow enslaving a bond to itself").
WARNING: possible recursive locking detected
4.18.0-rc7+ #176 Not tainted
--------------------------------------------
syz-executor4/6391 is trying to acquire lock:
(____ptrval____) (&team->lock){+.+.}, at: team_vlan_rx_add_vid+0x3b/0x1e0 drivers/net/team/team.c:1868
but task is already holding lock:
(____ptrval____) (&team->lock){+.+.}, at: team_add_slave+0xdb/0x1c30 drivers/net/team/team.c:1947
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&team->lock);
lock(&team->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by syz-executor4/6391:
#0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline]
#0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4662
#1: (____ptrval____) (&team->lock){+.+.}, at: team_add_slave+0xdb/0x1c30 drivers/net/team/team.c:1947
stack backtrace:
CPU: 1 PID: 6391 Comm: syz-executor4 Not tainted 4.18.0-rc7+ #176
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
print_deadlock_bug kernel/locking/lockdep.c:1765 [inline]
check_deadlock kernel/locking/lockdep.c:1809 [inline]
validate_chain kernel/locking/lockdep.c:2405 [inline]
__lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435
lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924
__mutex_lock_common kernel/locking/mutex.c:757 [inline]
__mutex_lock+0x176/0x1820 kernel/locking/mutex.c:894
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:909
team_vlan_rx_add_vid+0x3b/0x1e0 drivers/net/team/team.c:1868
vlan_add_rx_filter_info+0x14a/0x1d0 net/8021q/vlan_core.c:210
__vlan_vid_add net/8021q/vlan_core.c:278 [inline]
vlan_vid_add+0x63e/0x9d0 net/8021q/vlan_core.c:308
vlan_device_event.cold.12+0x2a/0x2f net/8021q/vlan.c:381
notifier_call_chain+0x180/0x390 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735
call_netdevice_notifiers net/core/dev.c:1753 [inline]
dev_open+0x173/0x1b0 net/core/dev.c:1433
team_port_add drivers/net/team/team.c:1219 [inline]
team_add_slave+0xa8b/0x1c30 drivers/net/team/team.c:1948
do_set_master+0x1c9/0x220 net/core/rtnetlink.c:2248
do_setlink+0xba4/0x3e10 net/core/rtnetlink.c:2382
rtnl_setlink+0x2a9/0x400 net/core/rtnetlink.c:2636
rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4665
netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2455
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4683
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
netlink_sendmsg+0xa18/0xfd0 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:642 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:652
___sys_sendmsg+0x7fd/0x930 net/socket.c:2126
__sys_sendmsg+0x11d/0x290 net/socket.c:2164
__do_sys_sendmsg net/socket.c:2173 [inline]
__se_sys_sendmsg net/socket.c:2171 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2171
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x456b29
Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f9706bf8c78 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00007f9706bf96d4 RCX:
0000000000456b29
RDX:
0000000000000000 RSI:
0000000020000240 RDI:
0000000000000004
RBP:
00000000009300a0 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000ffffffff
R13:
00000000004d3548 R14:
00000000004c8227 R15:
0000000000000000
Fixes:
87002b03baab ("net: introduce vlan_vid_[add/del] and use them instead of direct [add/kill]_vid ndo calls")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-and-tested-by: syzbot+bd051aba086537515cdb@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shahed Shaikh [Wed, 26 Sep 2018 19:41:10 +0000 (12:41 -0700)]
qlcnic: fix Tx descriptor corruption on 82xx devices
[ Upstream commit
c333fa0c4f220f8f7ea5acd6b0ebf3bf13fd684d ]
In regular NIC transmission flow, driver always configures MAC using
Tx queue zero descriptor as a part of MAC learning flow.
But with multi Tx queue supported NIC, regular transmission can occur on
any non-zero Tx queue and from that context it uses
Tx queue zero descriptor to configure MAC, at the same time TX queue
zero could be used by another CPU for regular transmission
which could lead to Tx queue zero descriptor corruption and cause FW
abort.
This patch fixes this in such a way that driver always configures
learned MAC address from the same Tx queue which is used for
regular transmission.
Fixes:
7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism")
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yu Zhao [Fri, 28 Sep 2018 23:04:30 +0000 (17:04 -0600)]
net/usb: cancel pending work when unbinding smsc75xx
[ Upstream commit
f7b2a56e1f3dcbdb4cf09b2b63e859ffe0e09df8 ]
Cancel pending work before freeing smsc75xx private data structure
during binding. This fixes the following crash in the driver:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000050
IP: mutex_lock+0x2b/0x3f
<snipped>
Workqueue: events smsc75xx_deferred_multicast_write [smsc75xx]
task:
ffff8caa83e85700 task.stack:
ffff948b80518000
RIP: 0010:mutex_lock+0x2b/0x3f
<snipped>
Call Trace:
smsc75xx_deferred_multicast_write+0x40/0x1af [smsc75xx]
process_one_work+0x18d/0x2fc
worker_thread+0x1a2/0x269
? pr_cont_work+0x58/0x58
kthread+0xfa/0x10a
? pr_cont_work+0x58/0x58
? rcu_read_unlock_sched_notrace+0x48/0x48
ret_from_fork+0x22/0x40
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Tranchetti [Thu, 20 Sep 2018 20:29:45 +0000 (14:29 -0600)]
netlabel: check for IPV4MASK in addrinfo_get
[ Upstream commit
f88b4c01b97e09535505cf3c327fdbce55c27f00 ]
netlbl_unlabel_addrinfo_get() assumes that if it finds the
NLBL_UNLABEL_A_IPV4ADDR attribute, it must also have the
NLBL_UNLABEL_A_IPV4MASK attribute as well. However, this is
not necessarily the case as the current checks in
netlbl_unlabel_staticadd() and friends are not sufficent to
enforce this.
If passed a netlink message with NLBL_UNLABEL_A_IPV4ADDR,
NLBL_UNLABEL_A_IPV6ADDR, and NLBL_UNLABEL_A_IPV6MASK attributes,
these functions will all call netlbl_unlabel_addrinfo_get() which
will then attempt dereference NULL when fetching the non-existent
NLBL_UNLABEL_A_IPV4MASK attribute:
Unable to handle kernel NULL pointer dereference at virtual address 0
Process unlab (pid: 31762, stack limit = 0xffffff80502d8000)
Call trace:
netlbl_unlabel_addrinfo_get+0x44/0xd8
netlbl_unlabel_staticremovedef+0x98/0xe0
genl_rcv_msg+0x354/0x388
netlink_rcv_skb+0xac/0x118
genl_rcv+0x34/0x48
netlink_unicast+0x158/0x1f0
netlink_sendmsg+0x32c/0x338
sock_sendmsg+0x44/0x60
___sys_sendmsg+0x1d0/0x2a8
__sys_sendmsg+0x64/0xb4
SyS_sendmsg+0x34/0x4c
el0_svc_naked+0x34/0x38
Code:
51001149 7100113f 540000a0 f9401508 (
79400108)
---[ end trace
f6438a488e737143 ]---
Kernel panic - not syncing: Fatal exception
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeff Barnhill [Fri, 21 Sep 2018 00:45:27 +0000 (00:45 +0000)]
net/ipv6: Display all addresses in output of /proc/net/if_inet6
[ Upstream commit
86f9bd1ff61c413a2a251fa736463295e4e24733 ]
The backend handling for /proc/net/if_inet6 in addrconf.c doesn't properly
handle starting/stopping the iteration. The problem is that at some point
during the iteration, an overflow is detected and the process is
subsequently stopped. The item being shown via seq_printf() when the
overflow occurs is not actually shown, though. When start() is
subsequently called to resume iterating, it returns the next item, and
thus the item that was being processed when the overflow occurred never
gets printed.
Alter the meaning of the private data member "offset". Currently, when it
is not 0 (which only happens at the very beginning), "offset" represents
the next hlist item to be printed. After this change, "offset" always
represents the current item.
This is also consistent with the private data member "bucket", which
represents the current bucket, and also the use of "pos" as defined in
seq_file.txt:
The pos passed to start() will always be either zero, or the most
recent pos used in the previous session.
Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sabrina Dubroca [Tue, 9 Oct 2018 15:48:14 +0000 (17:48 +0200)]
net: ipv4: update fnhe_pmtu when first hop's MTU changes
[ Upstream commit
af7d6cce53694a88d6a1bb60c9a239a6a5144459 ]
Since commit
5aad1de5ea2c ("ipv4: use separate genid for next hop
exceptions"), exceptions get deprecated separately from cached
routes. In particular, administrative changes don't clear PMTU anymore.
As Stefano described in commit
e9fa1495d738 ("ipv6: Reflect MTU changes
on PMTU of exceptions for MTU-less routes"), the PMTU discovered before
the local MTU change can become stale:
- if the local MTU is now lower than the PMTU, that PMTU is now
incorrect
- if the local MTU was the lowest value in the path, and is increased,
we might discover a higher PMTU
Similarly to what commit
e9fa1495d738 did for IPv6, update PMTU in those
cases.
If the exception was locked, the discovered PMTU was smaller than the
minimal accepted PMTU. In that case, if the new local MTU is smaller
than the current PMTU, let PMTU discovery figure out if locking of the
exception is still needed.
To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU
notifier. By the time the notifier is called, dev->mtu has been
changed. This patch adds the old MTU as additional information in the
notifier structure, and a new call_netdevice_notifiers_u32() function.
Fixes:
5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sun, 30 Sep 2018 18:33:39 +0000 (11:33 -0700)]
ipv4: fix use-after-free in ip_cmsg_recv_dstaddr()
[ Upstream commit
64199fc0a46ba211362472f7f942f900af9492fd ]
Caching ip_hdr(skb) before a call to pskb_may_pull() is buggy,
do not do it.
Fixes:
2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Mon, 24 Sep 2018 13:48:19 +0000 (15:48 +0200)]
ip_tunnel: be careful when accessing the inner header
[ Upstream commit
ccfec9e5cb2d48df5a955b7bf47f7782157d3bc2]
Cong noted that we need the same checks introduced by commit
76c0ddd8c3a6
("ip6_tunnel: be careful when accessing the inner header")
even for ipv4 tunnels.
Fixes:
c54419321455 ("GRE: Refactor GRE tunneling code.")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Wed, 19 Sep 2018 13:02:07 +0000 (15:02 +0200)]
ip6_tunnel: be careful when accessing the inner header
[ Upstream commit
76c0ddd8c3a683f6e2c6e60e11dc1a1558caf4bc ]
the ip6 tunnel xmit ndo assumes that the processed skb always
contains an ip[v6] header, but syzbot has found a way to send
frames that fall short of this assumption, leading to the following splat:
BUG: KMSAN: uninit-value in ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307
[inline]
BUG: KMSAN: uninit-value in ip6_tnl_start_xmit+0x7d2/0x1ef0
net/ipv6/ip6_tunnel.c:1390
CPU: 0 PID: 4504 Comm: syz-executor558 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline]
ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390
__netdev_start_xmit include/linux/netdevice.h:4066 [inline]
netdev_start_xmit include/linux/netdevice.h:4075 [inline]
xmit_one net/core/dev.c:3026 [inline]
dev_hard_start_xmit+0x5f1/0xc70 net/core/dev.c:3042
__dev_queue_xmit+0x27ee/0x3520 net/core/dev.c:3557
dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590
packet_snd net/packet/af_packet.c:2944 [inline]
packet_sendmsg+0x7c70/0x8a30 net/packet/af_packet.c:2969
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmmsg+0x42d/0x800 net/socket.c:2136
SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167
SyS_sendmmsg+0x63/0x90 net/socket.c:2162
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x441819
RSP: 002b:
00007ffe58ee8268 EFLAGS:
00000213 ORIG_RAX:
0000000000000133
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
0000000000441819
RDX:
0000000000000002 RSI:
0000000020000100 RDI:
0000000000000003
RBP:
00000000006cd018 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000213 R12:
0000000000402510
R13:
00000000004025a0 R14:
0000000000000000 R15:
0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2737 [inline]
__kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:984 [inline]
alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234
sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085
packet_alloc_skb net/packet/af_packet.c:2803 [inline]
packet_snd net/packet/af_packet.c:2894 [inline]
packet_sendmsg+0x6454/0x8a30 net/packet/af_packet.c:2969
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmmsg+0x42d/0x800 net/socket.c:2136
SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167
SyS_sendmmsg+0x63/0x90 net/socket.c:2162
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
This change addresses the issue adding the needed check before
accessing the inner header.
The ipv4 side of the issue is apparently there since the ipv4 over ipv6
initial support, and the ipv6 side predates git history.
Fixes:
c4d3efafcc93 ("[IPV6] IP6TUNNEL: Add support to IPv4 over IPv6 tunnel.")
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+3fde91d4d394747d6db4@syzkaller.appspotmail.com
Tested-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mahesh Bandewar [Mon, 24 Sep 2018 21:40:11 +0000 (14:40 -0700)]
bonding: avoid possible dead-lock
[ Upstream commit
d4859d749aa7090ffb743d15648adb962a1baeae ]
Syzkaller reported this on a slightly older kernel but it's still
applicable to the current kernel -
======================================================
WARNING: possible circular locking dependency detected
4.18.0-next-
20180823+ #46 Not tainted
------------------------------------------------------
syz-executor4/26841 is trying to acquire lock:
00000000dd41ef48 ((wq_completion)bond_dev->name){+.+.}, at: flush_workqueue+0x2db/0x1e10 kernel/workqueue.c:2652
but task is already holding lock:
00000000768ab431 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline]
00000000768ab431 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4708
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (rtnl_mutex){+.+.}:
__mutex_lock_common kernel/locking/mutex.c:925 [inline]
__mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088
rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77
bond_netdev_notify drivers/net/bonding/bond_main.c:1310 [inline]
bond_netdev_notify_work+0x44/0xd0 drivers/net/bonding/bond_main.c:1320
process_one_work+0xc73/0x1aa0 kernel/workqueue.c:2153
worker_thread+0x189/0x13c0 kernel/workqueue.c:2296
kthread+0x35a/0x420 kernel/kthread.c:246
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
-> #1 ((work_completion)(&(&nnw->work)->work)){+.+.}:
process_one_work+0xc0b/0x1aa0 kernel/workqueue.c:2129
worker_thread+0x189/0x13c0 kernel/workqueue.c:2296
kthread+0x35a/0x420 kernel/kthread.c:246
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
-> #0 ((wq_completion)bond_dev->name){+.+.}:
lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901
flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655
drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820
destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155
__alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138
bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734
register_netdevice+0x337/0x1100 net/core/dev.c:8410
bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453
rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099
rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711
netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:622 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:632
___sys_sendmsg+0x7fd/0x930 net/socket.c:2115
__sys_sendmsg+0x11d/0x290 net/socket.c:2153
__do_sys_sendmsg net/socket.c:2162 [inline]
__se_sys_sendmsg net/socket.c:2160 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Chain exists of:
(wq_completion)bond_dev->name --> (work_completion)(&(&nnw->work)->work) --> rtnl_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(rtnl_mutex);
lock((work_completion)(&(&nnw->work)->work));
lock(rtnl_mutex);
lock((wq_completion)bond_dev->name);
*** DEADLOCK ***
1 lock held by syz-executor4/26841:
stack backtrace:
CPU: 1 PID: 26841 Comm: syz-executor4 Not tainted 4.18.0-next-
20180823+ #46
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
print_circular_bug.isra.34.cold.55+0x1bd/0x27d kernel/locking/lockdep.c:1222
check_prev_add kernel/locking/lockdep.c:1862 [inline]
check_prevs_add kernel/locking/lockdep.c:1975 [inline]
validate_chain kernel/locking/lockdep.c:2416 [inline]
__lock_acquire+0x3449/0x5020 kernel/locking/lockdep.c:3412
lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901
flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655
drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820
destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155
__alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138
bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734
register_netdevice+0x337/0x1100 net/core/dev.c:8410
bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453
rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099
rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711
netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:622 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:632
___sys_sendmsg+0x7fd/0x930 net/socket.c:2115
__sys_sendmsg+0x11d/0x290 net/socket.c:2153
__do_sys_sendmsg net/socket.c:2162 [inline]
__se_sys_sendmsg net/socket.c:2160 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457089
Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f2df20a5c78 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00007f2df20a66d4 RCX:
0000000000457089
RDX:
0000000000000000 RSI:
0000000020000180 RDI:
0000000000000003
RBP:
0000000000930140 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000ffffffff
R13:
00000000004d40b8 R14:
00000000004c8ad8 R15:
0000000000000001
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Chan [Wed, 26 Sep 2018 04:41:04 +0000 (00:41 -0400)]
bnxt_en: Fix TX timeout during netpoll.
[ Upstream commit
73f21c653f930f438d53eed29b5e4c65c8a0f906 ]
The current netpoll implementation in the bnxt_en driver has problems
that may miss TX completion events. bnxt_poll_work() in effect is
only handling at most 1 TX packet before exiting. In addition,
there may be in flight TX completions that ->poll() may miss even
after we fix bnxt_poll_work() to handle all visible TX completions.
netpoll may not call ->poll() again and HW may not generate IRQ
because the driver does not ARM the IRQ when the budget (0 for netpoll)
is reached.
We fix it by handling all TX completions and to always ARM the IRQ
when we exit ->poll() with 0 budget.
Also, the logic to ACK the completion ring in case it is almost filled
with TX completions need to be adjusted to take care of the 0 budget
case, as discussed with Eric Dumazet <edumazet@google.com>
Reported-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Tested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hou Tao [Fri, 12 Oct 2018 06:01:26 +0000 (14:01 +0800)]
jffs2: return -ERANGE when xattr buffer is too small
When a file have multiple xattrs and the passed buffer is
smaller than the required size, jffs2_listxattr() should
return -ERANGE instead of continue, else Oops may occur
due to memory corruption.
Also remove the unnecessary check ("rc < 0"), because
xhandle->list(...) will not return an error number.
Spotted by generic/377 in xfstests-dev.
NB: The problem had been fixed by commit
764a5c6b1fa4 ("xattr
handlers: Simplify list operation") in v4.5-rc1, but the
modification in that commit may be too much because it modifies
all file-systems which implement xattr, so I create a single
patch for jffs2 to fix the problem.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Mon, 12 Feb 2018 12:24:47 +0000 (14:24 +0200)]
xhci: Don't print a warning when setting link state for disabled ports
commit
1208d8a84fdcae6b395c57911cdf907450d30e70 upstream.
When disabling a USB3 port the hub driver will set the port link state to
U3 to prevent "ejected" or "safely removed" devices that are still
physically connected from immediately re-enumerating.
If the device was really unplugged, then error messages were printed
as the hub tries to set the U3 link state for a port that is no longer
enabled.
xhci-hcd
ee000000.usb: Cannot set link state.
usb usb8-port1: cannot disable (err = -32)
Don't print error message in xhci-hub if hub tries to set port link state
for a disabled port. Return -ENODEV instead which also silences hub driver.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Edgar Cherkasov [Thu, 27 Sep 2018 08:56:03 +0000 (11:56 +0300)]
i2c: i2c-scmi: fix for i2c_smbus_write_block_data
commit
08d9db00fe0e300d6df976e6c294f974988226dd upstream.
The i2c-scmi driver crashes when the SMBus Write Block transaction is
executed:
WARNING: CPU: 9 PID: 2194 at mm/page_alloc.c:3931 __alloc_pages_slowpath+0x9db/0xec0
Call Trace:
? get_page_from_freelist+0x49d/0x11f0
? alloc_pages_current+0x6a/0xe0
? new_slab+0x499/0x690
__alloc_pages_nodemask+0x265/0x280
alloc_pages_current+0x6a/0xe0
kmalloc_order+0x18/0x40
kmalloc_order_trace+0x24/0xb0
? acpi_ut_allocate_object_desc_dbg+0x62/0x10c
__kmalloc+0x203/0x220
acpi_os_allocate_zeroed+0x34/0x36
acpi_ut_copy_eobject_to_iobject+0x266/0x31e
acpi_evaluate_object+0x166/0x3b2
acpi_smbus_cmi_access+0x144/0x530 [i2c_scmi]
i2c_smbus_xfer+0xda/0x370
i2cdev_ioctl_smbus+0x1bd/0x270
i2cdev_ioctl+0xaa/0x250
do_vfs_ioctl+0xa4/0x600
SyS_ioctl+0x79/0x90
do_syscall_64+0x73/0x130
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
ACPI Error: Evaluating _SBW: 4 (
20170831/smbus_cmi-185)
This problem occurs because the length of ACPI Buffer object is not
defined/initialized in the code before a corresponding ACPI method is
called. The obvious patch below fixes this issue.
Signed-off-by: Edgar Cherkasov <echerkasov@dev.rtsoft.ru>
Acked-by: Viktor Krasnov <vkrasnov@dev.rtsoft.ru>
Acked-by: Michael Brunner <Michael.Brunner@kontron.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Tue, 11 Sep 2018 11:45:03 +0000 (14:45 +0300)]
perf script python: Fix export-to-postgresql.py occasional failure
commit
25e11700b54c7b6b5ebfc4361981dae12299557b upstream.
Occasional export failures were found to be caused by truncating 64-bit
pointers to 32-bits. Fix by explicitly setting types for all ctype
arguments and results.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180911114504.28516-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Fri, 17 Aug 2018 19:19:37 +0000 (15:19 -0400)]
mach64: detect the dot clock divider correctly on sparc
commit
76ebebd2464c5c8a4453c98b6dbf9c95a599e810 upstream.
On Sun Ultra 5, it happens that the dot clock is not set up properly for
some videomodes. For example, if we set the videomode "r1024x768x60" in
the firmware, Linux would incorrectly set a videomode with refresh rate
180Hz when booting (suprisingly, my LCD monitor can display it, although
display quality is very low).
The reason is this: Older mach64 cards set the divider in the register
VCLK_POST_DIV. The register has four 2-bit fields (the field that is
actually used is specified in the lowest two bits of the register
CLOCK_CNTL). The 2 bits select divider "1, 2, 4, 8". On newer mach64 cards,
there's another bit added - the top four bits of PLL_EXT_CNTL extend the
divider selection, so we have possible dividers "1, 2, 4, 8, 3, 5, 6, 12".
The Linux driver clears the top four bits of PLL_EXT_CNTL and never sets
them, so it can work regardless if the card supports them. However, the
sparc64 firmware may set these extended dividers during boot - and the
mach64 driver detects incorrect dot clock in this case.
This patch makes the driver read the additional divider bit from
PLL_EXT_CNTL and calculate the initial refresh rate properly.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Fri, 5 Oct 2018 22:52:03 +0000 (15:52 -0700)]
mm/vmstat.c: fix outdated vmstat_text
commit
28e2c4bb99aa40f9d5f07ac130cbc4da0ea93079 upstream.
7a9cdebdcc17 ("mm: get rid of vmacache_flush_all() entirely") removed the
VMACACHE_FULL_FLUSHES statistics, but didn't remove the corresponding
entry in vmstat_text. This causes an out-of-bounds access in
vmstat_show().
Luckily this only affects kernels with CONFIG_DEBUG_VM_VMACACHE=y, which
is probably very rare.
Link: http://lkml.kernel.org/r/20181001143138.95119-1-jannh@google.com
Fixes:
7a9cdebdcc17 ("mm: get rid of vmacache_flush_all() entirely")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Kemi Wang <kemi.wang@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Wed, 13 Jun 2018 04:23:11 +0000 (00:23 -0400)]
ext4: add corruption check in ext4_xattr_set_entry()
commit
5369a762c882c0b6e9599e4ebbb3a9ba9eee7e2d upstream.
In theory this should have been caught earlier when the xattr list was
verified, but in case it got missed, it's simple enough to add check
to make sure we don't overrun the xattr buffer.
This addresses CVE-2018-10879.
https://bugzilla.kernel.org/show_bug.cgi?id=200001
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
[bwh: Backported to 3.16:
- Add inode parameter to ext4_xattr_set_entry() and update callers
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
[adjusted for 4.4 context]
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amber Lin [Thu, 13 Sep 2018 01:42:18 +0000 (21:42 -0400)]
drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7
[ Upstream commit
caaa4c8a6be2a275bd14f2369ee364978ff74704 ]
A wrong register bit was examinated for checking SDMA status so it reports
false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct
bit.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Ferre [Fri, 14 Sep 2018 15:48:11 +0000 (17:48 +0200)]
ARM: dts: at91: add new compatibility string for macb on sama5d3
[ Upstream commit
321cc359d899a8e988f3725d87c18a628e1cc624 ]
We need this new compatibility string as we experienced different behavior
for this 10/100Mbits/s macb interface on this particular SoC.
Backward compatibility is preserved as we keep the alternative strings.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Ferre [Fri, 14 Sep 2018 15:48:10 +0000 (17:48 +0200)]
net: macb: disable scatter-gather for macb on sama5d3
[ Upstream commit
eb4ed8e2d7fecb5f40db38e4498b9ee23cddf196 ]
Create a new configuration for the sama5d3-macb new compatibility string.
This configuration disables scatter-gather because we experienced lock down
of the macb interface of this particular SoC under very high load.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jongsung Kim [Thu, 13 Sep 2018 09:32:21 +0000 (18:32 +0900)]
stmmac: fix valid numbers of unicast filter entries
[ Upstream commit
edf2ef7242805e53ec2e0841db26e06d8bc7da70 ]
Synopsys DWC Ethernet MAC can be configured to have 1..32, 64, or
128 unicast filter entries. (Table 7-8 MAC Address Registers from
databook) Fix dwmac1000_validate_ucast_entries() to accept values
between 1 and 32 in addition.
Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yu Zhao [Tue, 11 Sep 2018 21:14:04 +0000 (15:14 -0600)]
sound: enable interrupt after dma buffer initialization
[ Upstream commit
b61749a89f826eb61fc59794d9e4697bd246eb61 ]
In snd_hdac_bus_init_chip(), we enable interrupt before
snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has
been acquired and irq handler uses the dma buffer, kernel may crash
when interrupt comes in.
Fix the problem by postponing enabling irq after dma buffer
initialization. And warn once on null dma buffer pointer during the
initialization.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Lindgren [Wed, 25 Apr 2018 14:29:22 +0000 (07:29 -0700)]
mfd: omap-usb-host: Fix dts probe of children
[ Upstream commit
10492ee8ed9188d6d420e1f79b2b9bdbc0624e65 ]
It currently only works if the parent bus uses "simple-bus". We
currently try to probe children with non-existing compatible values.
And we're missing .probe.
I noticed this while testing devices configured to probe using ti-sysc
interconnect target module driver. For that we also may want to rebind
the driver, so let's remove __init and __exit.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lei Yang [Wed, 5 Sep 2018 03:14:49 +0000 (11:14 +0800)]
selftests/efivarfs: add required kernel configs
[ Upstream commit
53cf59d6c0ad3edc4f4449098706a8f8986258b6 ]
add config file
Signed-off-by: Lei Yang <Lei.Yang@windriver.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Danny Smith [Thu, 23 Aug 2018 08:26:20 +0000 (10:26 +0200)]
ASoC: sigmadsp: safeload should not have lower byte limit
[ Upstream commit
5ea752c6efdf5aa8a57aed816d453a8f479f1b0a ]
Fixed range in safeload conditional to allow safeload to up to 20 bytes,
without a lower limit.
Signed-off-by: Danny Smith <dannys@axis.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pierre-Louis Bossart [Thu, 23 Aug 2018 03:49:36 +0000 (22:49 -0500)]
ASoC: wm8804: Add ACPI support
[ Upstream commit
960cdd50ca9fdfeb82c2757107bcb7f93c8d7d41 ]
HID made of either Wolfson/CirrusLogic PCI ID + 8804 identifier.
This helps enumerate the HifiBerry Digi+ HAT boards on the Up2 platform.
The scripts at https://github.com/thesofproject/acpi-scripts can be
used to add the ACPI initrd overlays.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prakash Gupta [Wed, 12 Sep 2018 12:24:57 +0000 (17:54 +0530)]
ion: msm_ion: fix incorrect ion_buffer member assignment
ION_PRIV_FLAG corresponds to ion_buffer.private_flags member. Fix incorrect
assignment of ION_PRIV_FLAG_SHRINKER_FREE to ion_buffer.flags.
Change-Id: Ic24085a78c25fe9efa89a790ee80a20a5cb05fb3
Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
Linux Build Service Account [Fri, 19 Oct 2018 08:46:27 +0000 (01:46 -0700)]
Merge "cnss2: Update WLAN composite USB I/F number for QCN7605"
Rajasekaran Kalidoss [Mon, 8 Oct 2018 08:18:21 +0000 (13:48 +0530)]
cnss2: Update QMI files with cold cal data changes
QCN7605 supports cold boot cal data upload/download
over QMI for HL transports. QMI structures are updated
to support this.
Change-Id: Ic91f856ced8d30ab31cb305396ec476c6ca55f40
Signed-off-by: Rajasekaran Kalidoss <rkalidos@codeaurora.org>
Jerry Zhang [Wed, 27 Sep 2017 18:49:44 +0000 (11:49 -0700)]
ANDROID: usb: gadget: f_mtp: Return error if count is negative
If the user passes in a negative file size in a int64,
this will compare to be smaller than buffer length,
and it will get truncated to form a read length that
is larger than the buffer length.
To fix, return -EINVAL if the count argument is negative,
so the loop will never happen.
Bug:
37429972
Test: Test with PoC
Change-Id: I5d52e38e6fbe2c17eb8c493f9eb81df6cfd780a4
Signed-off-by: Jerry Zhang <zhangjerry@google.com>
Rajasekaran Kalidoss [Tue, 16 Oct 2018 14:00:14 +0000 (19:30 +0530)]
cnss2: Update WLAN composite USB I/F number for QCN7605
For QCN7605 composite usb ,the WLAN interface number is 2.
update this number to register CNSS as driver for WLAN
I/F.
Change-Id: I8dd97d18bf57e4268f194f846ad7c2e7b77afe50
Signed-off-by: Rajasekaran Kalidoss <rkalidos@codeaurora.org>
Venkata Rao Kakani [Thu, 18 Oct 2018 08:43:51 +0000 (14:13 +0530)]
arm64: dts: msm: Enable HMP scheduling for android guest
Enable HMP scheduling from device tree for GVMQ.
Change-Id: I8c25c8e5597ec70fab5d32d15b006868cef17535
Signed-off-by: Venkata Rao Kakani <vkakani@codeaurora.org>
Linux Build Service Account [Wed, 17 Oct 2018 20:59:11 +0000 (13:59 -0700)]
Merge "cnss2: Add support for USB transport"
Linux Build Service Account [Wed, 17 Oct 2018 13:15:03 +0000 (06:15 -0700)]
Merge "msm: ipa3: Fix to validate the user inputs"
Linux Build Service Account [Wed, 17 Oct 2018 05:13:51 +0000 (22:13 -0700)]
Merge "Merge android-4.4.160 (
a94efb1) into msm-4.4"
Steve Muckle [Tue, 16 Oct 2018 18:23:05 +0000 (11:23 -0700)]
ANDROID: x86_64_cuttlefish_defconfig: disable CONFIG_MEMORY_STATE_TIME
Bug:
117847156
Change-Id: Idfbac9c1f0dc2617642c30ddb65400083da44b49
Signed-off-by: Steve Muckle <smuckle@google.com>
Linux Build Service Account [Tue, 16 Oct 2018 20:39:19 +0000 (13:39 -0700)]
Merge "msm-auto: defconfig: Enable USB_QCOM_IPC_BRIDGE config"
Linux Build Service Account [Tue, 16 Oct 2018 20:39:13 +0000 (13:39 -0700)]
Merge "usb: dwc3-msm: Flush bus_vote_w work on pm_suspend and freeze"
Linux Build Service Account [Tue, 16 Oct 2018 20:39:11 +0000 (13:39 -0700)]
Merge "defconfig: arm: msm: Enable config options required for VTS"
Rajasekaran Kalidoss [Wed, 6 Jun 2018 03:35:41 +0000 (09:05 +0530)]
cnss2: Add support for USB transport
Changes in state machine and boot flow to support usb bus
based behaviour. Handler functions added to support USB
boot flow.
Change-Id: I51c4751c8d8669a8b54ae692ae3ec1bb32d1e7be
Signed-off-by: Rajasekaran Kalidoss <rkalidos@codeaurora.org>
Linux Build Service Account [Tue, 16 Oct 2018 12:27:02 +0000 (05:27 -0700)]
Merge "ASoC: msm: qdsp6v2: fix issue of uninitialized variable"
Ajay Agarwal [Wed, 3 Oct 2018 11:50:12 +0000 (17:20 +0530)]
usb: dwc3-msm: Flush bus_vote_w work on pm_suspend and freeze
Currently as a part of dwc3_msm_pm_suspend, driver calls suspend
routine which schedules bus_vote_w to remove bus votes from USB.
But it could be possible that the system freezes before the work
function could get called or completed. This will keep the USB
votes enabled and block XO shutdown.
Fix this by flushing the bus_vote_w at the end of pm_suspend to
ensure that bus votes are removed.
Change-Id: I578e3c4434eb04740f07f4dd0640a945a86fde8b
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Yuanfang Zhang [Wed, 10 Oct 2018 09:01:17 +0000 (17:01 +0800)]
coresight: fix handling of ETM management register access via sysfs
This patch add a coresight unit specific function coresight_cross_read
which can be used for ETM registers by providing a ETM specific read
function which does smp cross call to ensure the unit is powered up
before the register is accessed.
Change-Id: I4037028a171c8ca733513e82c4443b6e332a088c
Signed-off-by: Yuanfang Zhang <zhangyuanfang@codeaurora.org>
Linux Build Service Account [Tue, 16 Oct 2018 05:28:17 +0000 (22:28 -0700)]
Merge "ARM: dts: msm: disable sensor node on msm8996 and apq8096"
Han Lu [Fri, 28 Sep 2018 00:58:42 +0000 (08:58 +0800)]
ASoC: msm: qdsp6v2: fix issue of uninitialized variable
Fix issue that the variable paddr of type ion_phy_addr_t be used
without initialization in a few files
Change-Id: Idfa17595e9ef24640c40e573b9fbc74d14570fc5
Signed-off-by: Han Lu <hanlu@codeaurora.org>
Linux Build Service Account [Mon, 15 Oct 2018 21:12:37 +0000 (14:12 -0700)]
Merge "xfrm: validate template mode"
Sean Tranchetti [Fri, 7 Sep 2018 21:50:31 +0000 (15:50 -0600)]
xfrm: validate template mode
XFRM mode parameters passed as part of the user templates
in the IP_XFRM_POLICY are never properly validated. Passing
values other than valid XFRM modes can cause stack-out-of-bounds
reads to occur later in the XFRM processing:
[ 140.535608] ================================================================
[ 140.543058] BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x17e4/0x1cc4
[ 140.550306] Read of size 4 at addr
ffffffc0238a7a58 by task repro/5148
[ 140.557369]
[ 140.558927] Call trace:
[ 140.558936] dump_backtrace+0x0/0x388
[ 140.558940] show_stack+0x24/0x30
[ 140.558946] __dump_stack+0x24/0x2c
[ 140.558949] dump_stack+0x8c/0xd0
[ 140.558956] print_address_description+0x74/0x234
[ 140.558960] kasan_report+0x240/0x264
[ 140.558963] __asan_report_load4_noabort+0x2c/0x38
[ 140.558967] xfrm_state_find+0x17e4/0x1cc4
[ 140.558971] xfrm_resolve_and_create_bundle+0x40c/0x1fb8
[ 140.558975] xfrm_lookup+0x238/0x1444
[ 140.558977] xfrm_lookup_route+0x48/0x11c
[ 140.558984] ip_route_output_flow+0x88/0xc4
[ 140.558991] raw_sendmsg+0xa74/0x266c
[ 140.558996] inet_sendmsg+0x258/0x3b0
[ 140.559002] sock_sendmsg+0xbc/0xec
[ 140.559005] SyS_sendto+0x3a8/0x5a8
[ 140.559008] el0_svc_naked+0x34/0x38
[ 140.559009]
[ 140.592245] page dumped becaus: kasan: bad access detected
[ 140.597981] page_owner info is not active (free page?)
[ 140.603267]
[ 140.653503] ================================================================
Change-Id: I5d2fa78a9d950c79d83d759bfd4d0f399fed18a4
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Venkata Rao Kakani [Mon, 15 Oct 2018 09:46:11 +0000 (15:16 +0530)]
defconfig: arm: msm: Enable config options required for VTS
Enable security and other features to pass vendor test
suite.
Change-Id: Ic75f2eeb63f022306cae6824e9a2de975a259b4d
Signed-off-by: Venkata Rao Kakani <vkakani@codeaurora.org>
Linux Build Service Account [Mon, 15 Oct 2018 09:42:14 +0000 (02:42 -0700)]
Merge "net:wireless:Fix kw issues"
Srinivasarao P [Mon, 15 Oct 2018 09:05:13 +0000 (14:35 +0530)]
Merge android-4.4.161 (
8e7f196) into msm-4.4
* refs/heads/tmp-
8e7f196
Linux 4.4.161
ebtables: arpreply: Add the standard target sanity check
ath10k: fix scan crash due to incorrect length calculation
tcp: add tcp_ooo_try_coalesce() helper
tcp: call tcp_drop() from tcp_data_queue_ofo()
tcp: free batches of packets in tcp_prune_ofo_queue()
tcp: fix a stale ooo_last_skb after a replace
tcp: use an RB tree for ooo receive queue
tcp: increment sk_drops for dropped rx packets
ubifs: Check for name being NULL while mounting
ucma: fix a use-after-free in ucma_resolve_ip()
ARC: clone syscall to setp r25 as thread pointer
powerpc/fadump: Return error when fadump registration fails
ath10k: fix use-after-free in ath10k_wmi_cmd_send_nowait
cgroup: Fix deadlock in cpu hotplug path
ext4: always verify the magic number in xattr blocks
of: unittest: Disable interrupt node tests for old world MAC systems
USB: serial: simple: add Motorola Tetra MTP6550 id
xhci: Add missing CAS workaround for Intel Sunrise Point xHCI
dm cache: fix resize crash if user doesn't reload cache table
PM / core: Clear the direct_complete flag on errors
mac80211: fix setting IEEE80211_KEY_FLAG_RX_MGMT for AP mode keys
PCI: Reprogram bridge prefetch registers on resume
x86/vdso: Fix vDSO syscall fallback asm constraint regression
x86/vdso: Fix asm constraints on vDSO syscall fallbacks
fbdev/omapfb: fix omapfb_memory_read infoleak
mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly
Change-Id: If31f9e57679a3b1deb1049c86aeaead5ccbd64a6
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
Srinivasarao P [Mon, 15 Oct 2018 08:59:29 +0000 (14:29 +0530)]
Merge android-4.4.160 (
a94efb1) into msm-4.4
* refs/heads/tmp-
a94efb1
Linux 4.4.160
dm thin metadata: fix __udivdi3 undefined on 32-bit
ocfs2: fix locking for res->tracking and dlm->tracking_list
proc: restrict kernel stack dumps to root
crypto: mxs-dcp - Fix wait logic on chan threads
ALSA: hda/realtek - Cannot adjust speaker's volume on Dell XPS 27 7760
smb2: fix missing files in root share directory listing
xen: fix GCC warning and remove duplicate EVTCHN_ROW/EVTCHN_COL usage
xen: avoid crash in disable_hotplug_cpu
xen/manage: don't complain about an empty value in control/sysrq node
cifs: read overflow in is_valid_oplock_break()
s390/qeth: don't dump past end of unknown HW header
r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED
arm64: jump_label.h: use asm_volatile_goto macro instead of "asm goto"
hexagon: modify ffs() and fls() to return int
arch/hexagon: fix kernel/dma.c build warning
dm thin metadata: try to avoid ever aborting transactions
fs/cifs: suppress a string overflow warning
drm/nouveau/TBDdevinit: don't fail when PMU/PRE_OS is missing from VBIOS
USB: yurex: Check for truncation in yurex_read()
RDMA/ucma: check fd type in ucma_migrate_id()
perf probe powerpc: Ignore SyS symbols irrespective of endianness
usb: gadget: fotg210-udc: Fix memory leak of fotg210->ep[i]
mm: madvise(MADV_DODUMP): allow hugetlbfs pages
tools/vm/page-types.c: fix "defined but not used" warning
tools/vm/slabinfo.c: fix sign-compare warning
mac80211: shorten the IBSS debug messages
mac80211: Fix station bandwidth setting after channel switch
mac80211: fix a race between restart and CSA flows
cfg80211: fix a type issue in ieee80211_chandef_to_operating_class()
fs/cifs: don't translate SFM_SLASH (U+F026) to backslash
net: cadence: Fix a sleep-in-atomic-context bug in macb_halt_tx()
i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP
i2c: uniphier: issue STOP only for last message or I2C_M_STOP
RAID10 BUG_ON in raise_barrier when force is true and conf->barrier is 0
cfg80211: nl80211_update_ft_ies() to validate NL80211_ATTR_IE
mac80211: mesh: fix HWMP sequence numbering to follow standard
gpio: adp5588: Fix sleep-in-atomic-context bug
mac80211_hwsim: correct use of IEEE80211_VHT_CAP_RXSTBC_X
mac80211: correct use of IEEE80211_VHT_CAP_RXSTBC_X
KVM: PPC: Book3S HV: Don't truncate HPTE index in xlate function
media: v4l: event: Prevent freeing event subscriptions while accessed
arm64: KVM: Sanitize PSTATE.M when being set from userspace
arm64: cpufeature: Track 32bit EL0 support
i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus
hwmon: (adt7475) Make adt7475_read_word() return errors
hwmon: (ina2xx) fix sysfs shunt resistor read access
e1000: ensure to free old tx/rx rings in set_ringparam()
e1000: check on netif_running() before calling e1000_up()
net: hns: fix length and page_offset overflow when CONFIG_ARM64_64K_PAGES
thermal: of-thermal: disable passive polling when thermal zone is disabled
ext4: never move the system.data xattr out of the inode body
arm64: KVM: Tighten guest core register access from userspace
serial: imx: restore handshaking irq for imx1
scsi: target: iscsi: Use bin2hex instead of a re-implementation
IB/srp: Avoid that sg_reset -d ${srp_device} triggers an infinite loop
Input: elantech - enable middle button of touchpad on ThinkPad P72
USB: remove LPM management from usb_driver_claim_interface()
Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()"
USB: usbdevfs: restore warning for nonsensical flags
USB: usbdevfs: sanitize flags more
media: uvcvideo: Support realtek's UVC 1.5 device
slub: make ->cpu_partial unsigned int
USB: handle NULL config in usb_find_alt_setting()
USB: fix error handling in usb_driver_claim_interface()
spi: rspi: Fix interrupted DMA transfers
spi: rspi: Fix invalid SPI use during system suspend
spi: sh-msiof: Fix handling of write value for SISTR register
spi: sh-msiof: Fix invalid SPI use during system suspend
spi: tegra20-slink: explicitly enable/disable clock
serial: cpm_uart: return immediately from console poll
floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl
ARM: dts: dra7: fix DCAN node addresses
nfsd: fix corrupted reply to badly ordered compound
module: exclude SHN_UNDEF symbols from kallsyms api
ASoC: dapm: Fix potential DAI widget pointer deref when linking DAIs
EDAC, i7core: Fix memleaks and use-after-free on probe and remove
scsi: bnx2i: add error handling for ioremap_nocache
HID: hid-ntrig: add error handling for sysfs_create_group
ARM: mvebu: declare asm symbols as character arrays in pmsu.c
wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()
rndis_wlan: potential buffer overflow in rndis_wlan_auth_indication()
ath10k: protect ath10k_htt_rx_ring_free with rx_ring.lock
ALSA: hda: Add AZX_DCAPS_PM_RUNTIME for AMD Raven Ridge
media: tm6000: add error handling for dvb_register_adapter
drivers/tty: add error handling for pcmcia_loop_config
staging: android: ashmem: Fix mmap size validation
media: omap3isp: zero-initialize the isp cam_xclk{a,b} initial data
media: soc_camera: ov772x: correct setting of banding filter
media: s3c-camif: ignore -ENOIOCTLCMD from v4l2_subdev_call for s_power
ALSA: snd-aoa: add of_node_put() in error path
s390/extmem: fix gcc 8 stringop-overflow warning
alarmtimer: Prevent overflow for relative nanosleep
powerpc/powernv/ioda2: Reduce upper limit for DMA window size
usb: wusbcore: security: cast sizeof to int for comparison
scsi: ibmvscsi: Improve strings handling
scsi: klist: Make it safe to use klists in atomic context
scsi: target/iscsi: Make iscsit_ta_authentication() respect the output buffer size
x86/entry/64: Add two more instruction suffixes
x86/tsc: Add missing header to tsc_msr.c
media: fsl-viu: fix error handling in viu_of_probe()
powerpc/kdump: Handle crashkernel memory reservation failure
media: exynos4-is: Prevent NULL pointer dereference in __isp_video_try_fmt()
md-cluster: clear another node's suspend_area after the copy is finished
6lowpan: iphc: reset mac_header after decompress to fix panic
USB: serial: kobil_sct: fix modem-status error handling
Bluetooth: Add a new Realtek 8723DE ID 0bda:b009
power: vexpress: fix corruption in notifier registration
uwb: hwa-rc: fix memory leak at probe
staging: rts5208: fix missing error check on call to rtsx_write_register
x86/numa_emulation: Fix emulated-to-physical node mapping
vmci: type promotion bug in qp_host_get_user_memory()
tsl2550: fix lux1_input error in low light
crypto: skcipher - Fix -Wstringop-truncation warnings
ANDROID: sdcardfs: Change current->fs under lock
ANDROID: sdcardfs: Don't use OVERRIDE_CRED macro
Revert "f2fs: use timespec64 for inode timestamps"
Conflicts:
arch/arm64/include/asm/cpufeature.h
Change-Id: I661204f2419f634173846d03ed4078b93aa006a1
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
Linux Build Service Account [Mon, 15 Oct 2018 02:04:43 +0000 (19:04 -0700)]
Merge "ARM: dts: msm: Set correct thermal threshold for msm8996 CV2X"
Linux Build Service Account [Sun, 14 Oct 2018 04:40:23 +0000 (21:40 -0700)]
Merge "soc: hab: add size checking when hab import buffer"
Greg Kroah-Hartman [Sat, 13 Oct 2018 08:39:05 +0000 (10:39 +0200)]
Merge 4.4.161 into android-4.4
Changes in 4.4.161
mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly
fbdev/omapfb: fix omapfb_memory_read infoleak
x86/vdso: Fix asm constraints on vDSO syscall fallbacks
x86/vdso: Fix vDSO syscall fallback asm constraint regression
PCI: Reprogram bridge prefetch registers on resume
mac80211: fix setting IEEE80211_KEY_FLAG_RX_MGMT for AP mode keys
PM / core: Clear the direct_complete flag on errors
dm cache: fix resize crash if user doesn't reload cache table
xhci: Add missing CAS workaround for Intel Sunrise Point xHCI
USB: serial: simple: add Motorola Tetra MTP6550 id
of: unittest: Disable interrupt node tests for old world MAC systems
ext4: always verify the magic number in xattr blocks
cgroup: Fix deadlock in cpu hotplug path
ath10k: fix use-after-free in ath10k_wmi_cmd_send_nowait
powerpc/fadump: Return error when fadump registration fails
ARC: clone syscall to setp r25 as thread pointer
ucma: fix a use-after-free in ucma_resolve_ip()
ubifs: Check for name being NULL while mounting
tcp: increment sk_drops for dropped rx packets
tcp: use an RB tree for ooo receive queue
tcp: fix a stale ooo_last_skb after a replace
tcp: free batches of packets in tcp_prune_ofo_queue()
tcp: call tcp_drop() from tcp_data_queue_ofo()
tcp: add tcp_ooo_try_coalesce() helper
ath10k: fix scan crash due to incorrect length calculation
ebtables: arpreply: Add the standard target sanity check
Linux 4.4.161
Change-Id: I4c6607d0be0977857f966b048279590470c854c2
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:11:36 +0000 (09:11 +0200)]
Linux 4.4.161
Gao Feng [Tue, 16 May 2017 01:30:18 +0000 (09:30 +0800)]
ebtables: arpreply: Add the standard target sanity check
commit
c953d63548207a085abcb12a15fefc8a11ffdf0a upstream.
The info->target comes from userspace and it would be used directly.
So we need to add the sanity check to make sure it is a valid standard
target, although the ebtables tool has already checked it. Kernel needs
to validate anything coming from userspace.
If the target is set as an evil value, it would break the ebtables
and cause a panic. Because the non-standard target is treated as one
offset.
Now add one helper function ebt_invalid_target, and we would replace
the macro INVALID_TARGET later.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Loic <hackurx@opensec.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhi Chen [Mon, 18 Jun 2018 14:00:39 +0000 (17:00 +0300)]
ath10k: fix scan crash due to incorrect length calculation
commit
c8291988806407e02a01b4b15b4504eafbcc04e0 upstream.
Length of WMI scan message was not calculated correctly. The allocated
buffer was smaller than what we expected. So WMI message corrupted
skb_info, which is at the end of skb->data. This fix takes TLV header
into account even if the element is zero-length.
Crash log:
[49.629986] Unhandled kernel unaligned access[#1]:
[49.634932] CPU: 0 PID: 1176 Comm: logd Not tainted 4.4.60 #180
[49.641040] task:
83051460 ti:
8329c000 task.ti:
8329c000
[49.646608] $ 0 :
00000000 00000001 80984a80 00000000
[49.652038] $ 4 :
45259e89 8046d484 8046df30 8024ba70
[49.657468] $ 8 :
00000000 804cc4c0 00000001 20306320
[49.662898] $12 :
33322037 000110f2 00000000 31203930
[49.668327] $16 :
82792b40 80984a80 00000001 804207fc
[49.673757] $20 :
00000000 0000012c 00000040 80470000
[49.679186] $24 :
00000000 8024af7c
[49.684617] $28 :
8329c000 8329db88 00000001 802c58d0
[49.690046] Hi :
00000000
[49.693022] Lo :
453c0000
[49.696013] epc :
800efae4 put_page+0x0/0x58
[49.700615] ra :
802c58d0 skb_release_data+0x148/0x1d4
[49.706184] Status:
1000fc03 KERNEL EXL IE
[49.710531] Cause :
00800010 (ExcCode 04)
[49.714669] BadVA :
45259e89
[49.717644] PrId :
00019374 (MIPS 24Kc)
Signed-off-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 14 Sep 2018 08:24:10 +0000 (16:24 +0800)]
tcp: add tcp_ooo_try_coalesce() helper
[ Upstream commit
58152ecbbcc6a0ce7fddd5bf5f6ee535834ece0c ]
In case skb in out_or_order_queue is the result of
multiple skbs coalescing, we would like to get a proper gso_segs
counter tracking, so that future tcp_drop() can report an accurate
number.
I chose to not implement this tracking for skbs in receive queue,
since they are not dropped, unless socket is disconnected.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 14 Sep 2018 08:24:09 +0000 (16:24 +0800)]
tcp: call tcp_drop() from tcp_data_queue_ofo()
[ Upstream commit
8541b21e781a22dce52a74fef0b9bed00404a1cd ]
In order to be able to give better diagnostics and detect
malicious traffic, we need to have better sk->sk_drops tracking.
Fixes:
9f5afeae5152 ("tcp: use an RB tree for ooo receive queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 14 Sep 2018 08:24:08 +0000 (16:24 +0800)]
tcp: free batches of packets in tcp_prune_ofo_queue()
[ Upstream commit
72cd43ba64fc172a443410ce01645895850844c8 ]
Juha-Matti Tilli reported that malicious peers could inject tiny
packets in out_of_order_queue, forcing very expensive calls
to tcp_collapse_ofo_queue() and tcp_prune_ofo_queue() for
every incoming packet. out_of_order_queue rb-tree can contain
thousands of nodes, iterating over all of them is not nice.
Before linux-4.9, we would have pruned all packets in ofo_queue
in one go, every XXXX packets. XXXX depends on sk_rcvbuf and skbs
truesize, but is about 7000 packets with tcp_rmem[2] default of 6 MB.
Since we plan to increase tcp_rmem[2] in the future to cope with
modern BDP, can not revert to the old behavior, without great pain.
Strategy taken in this patch is to purge ~12.5 % of the queue capacity.
Fixes:
36a6503fedda ("tcp: refine tcp_prune_ofo_queue() to not drop all packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 14 Sep 2018 08:24:07 +0000 (16:24 +0800)]
tcp: fix a stale ooo_last_skb after a replace
[ Upstream commit
76f0dcbb5ae1a7c3dbeec13dd98233b8e6b0b32a ]
When skb replaces another one in ooo queue, I forgot to also
update tp->ooo_last_skb as well, if the replaced skb was the last one
in the queue.
To fix this, we simply can re-use the code that runs after an insertion,
trying to merge skbs at the right of current skb.
This not only fixes the bug, but also remove all small skbs that might
be a subset of the new one.
Example:
We receive segments 2001:3001, 4001:5001
Then we receive 2001:8001 : We should replace 2001:3001 with the big
skb, but also remove 4001:50001 from the queue to save space.
packetdrill test demonstrating the bug
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
+0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
+0.100 < . 1:1(0) ack 1 win 1024
+0 accept(3, ..., ...) = 4
+0.01 < . 1001:2001(1000) ack 1 win 1024
+0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001>
+0.01 < . 1001:3001(2000) ack 1 win 1024
+0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001 1001:3001>
Fixes:
9f5afeae5152 ("tcp: use an RB tree for ooo receive queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yuchung Cheng <ycheng@google.com>
Cc: Yaogong Wang <wygivan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yaogong Wang [Fri, 14 Sep 2018 08:24:06 +0000 (16:24 +0800)]
tcp: use an RB tree for ooo receive queue
[ Upstream commit
9f5afeae51526b3ad7b7cb21ee8b145ce6ea7a7a ]
Over the years, TCP BDP has increased by several orders of magnitude,
and some people are considering to reach the 2 Gbytes limit.
Even with current window scale limit of 14, ~1 Gbytes maps to ~740,000
MSS.
In presence of packet losses (or reorders), TCP stores incoming packets
into an out of order queue, and number of skbs sitting there waiting for
the missing packets to be received can be in the 10^5 range.
Most packets are appended to the tail of this queue, and when
packets can finally be transferred to receive queue, we scan the queue
from its head.
However, in presence of heavy losses, we might have to find an arbitrary
point in this queue, involving a linear scan for every incoming packet,
throwing away cpu caches.
This patch converts it to a RB tree, to get bounded latencies.
Yaogong wrote a preliminary patch about 2 years ago.
Eric did the rebase, added ofo_last_skb cache, polishing and tests.
Tested with network dropping between 1 and 10 % packets, with good
success (about 30 % increase of throughput in stress tests)
Next step would be to also use an RB tree for the write queue at sender
side ;)
Signed-off-by: Yaogong Wang <wygivan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-By: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 14 Sep 2018 08:24:05 +0000 (16:24 +0800)]
tcp: increment sk_drops for dropped rx packets
[ Upstream commit
532182cd610782db8c18230c2747626562032205 ]
Now ss can report sk_drops, we can instruct TCP to increment
this per socket counter when it drops an incoming frame, to refine
monitoring and debugging.
Following patch takes care of listeners drops.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Weinberger [Mon, 3 Sep 2018 21:06:23 +0000 (23:06 +0200)]
ubifs: Check for name being NULL while mounting
commit
37f31b6ca4311b94d985fb398a72e5399ad57925 upstream.
The requested device name can be NULL or an empty string.
Check for that and refuse to continue. UBIFS has to do this manually
since we cannot use mount_bdev(), which checks for this condition.
Fixes:
1e51764a3c2ac ("UBIFS: add new flash file system")
Reported-by: syzbot+38bd0f7865e5c6379280@syzkaller.appspotmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>