OSDN Git Service
Hemant Kumar [Wed, 7 Dec 2016 02:34:40 +0000 (18:34 -0800)]
sound: usb: Handle implicit feedback data endpoint properly
For the devices supporting implicit feedback over data endpoint
usb audio driver instantiates snd_usb_endpoint as sync_endpoint
even though there is no real usb sync endpoint exists. QMI driver
looks for usb endpoint if sync_endpoint is instantiated and bails
out if endpoint related context does not exist. This causes such
devices to not work. Hence do not bail out if sync ep context
does not exist and continue preparing the QMI response.
Change-Id: I7d96555573cfd6cca1ca56c877d78fde943f8100
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Linux Build Service Account [Sun, 4 Dec 2016 13:55:31 +0000 (05:55 -0800)]
Merge "msm: vidc: Align release buffers with V4L2 states"
Linux Build Service Account [Sun, 4 Dec 2016 13:55:30 +0000 (05:55 -0800)]
Merge "msm: vidc: Add debug info inside queue headers"
Linux Build Service Account [Sun, 4 Dec 2016 01:18:07 +0000 (17:18 -0800)]
Merge "ARM: dts: msm: Set max non secure region to 0xE0000000 on msm8998"
Linux Build Service Account [Sun, 4 Dec 2016 01:18:06 +0000 (17:18 -0800)]
Merge "msm: vidc: avoid repeated calls to handle_sys_error"
Linux Build Service Account [Sun, 4 Dec 2016 01:18:06 +0000 (17:18 -0800)]
Merge "msm: vidc: fix lock issue in msm_comm_get_mbs_per_sec()"
Linux Build Service Account [Sat, 3 Dec 2016 17:59:53 +0000 (09:59 -0800)]
Merge "qcom-charger: smb2: add support of PMFALCON"
Linux Build Service Account [Sat, 3 Dec 2016 17:59:53 +0000 (09:59 -0800)]
Merge "ARM: dts: msm: fix slave-id of charger and FG on PMFALCON"
Linux Build Service Account [Sat, 3 Dec 2016 10:17:52 +0000 (02:17 -0800)]
Merge "icnss: Add support of setting MAC address from platform driver"
Linux Build Service Account [Sat, 3 Dec 2016 10:17:51 +0000 (02:17 -0800)]
Merge "ARM: dts: msm: Change camera mount angle for msm8998 QRD device"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:33 +0000 (09:02 -0800)]
Merge "ARM: dts: msm: change ufs regulators for msmfalcon interposer QRD"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:31 +0000 (09:02 -0800)]
Merge "ARM: dts: msm: Add sdhc2 regulator for QRD msmfalcon interposer"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:30 +0000 (09:02 -0800)]
Merge "defconfig: msm: Disable CRYPTO_DEV_QCE config flag for msmfalcon"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:29 +0000 (09:02 -0800)]
Merge "msm: kgsl: Reserve a context ID slot but don't populate immediately"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:28 +0000 (09:02 -0800)]
Merge "ASoC: msm: qdsp6v2: Fix an incorrect string comparison logic"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:26 +0000 (09:02 -0800)]
Merge "ASoC: msm8998: Update supported sample rates for USB backend."
Linux Build Service Account [Fri, 2 Dec 2016 17:02:25 +0000 (09:02 -0800)]
Merge "SoC: msm: q6dspv2: add null check for payload"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:24 +0000 (09:02 -0800)]
Merge "ASoC: wcd934x: enable lineout path in codec"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:22 +0000 (09:02 -0800)]
Merge "ASoC: soc-dapm: Invalidate DAPM path during dapm addition of routes"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:18 +0000 (09:02 -0800)]
Merge "misc: qcom: qdsp6v2: register ioctl calls for g711mlaw driver"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:16 +0000 (09:02 -0800)]
Merge "ASoC: audio-ext-clk: add new audio ext clock"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:15 +0000 (09:02 -0800)]
Merge "ARM: dts: msm: Update ascent battery profile for GEN3 FG"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:13 +0000 (09:02 -0800)]
Merge "ARM: dts: msm: Add sdhc2 support for msmfalcon interposer"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:12 +0000 (09:02 -0800)]
Merge "msm: kgsl: Check MMU type for memory and pagetable operations"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:11 +0000 (09:02 -0800)]
Merge "ARM: dts: msm: Remove clocks associated with GDSC for MSMfalcon/Trition"
Linux Build Service Account [Fri, 2 Dec 2016 17:02:09 +0000 (09:02 -0800)]
Merge "usb: gadget: f_rmnet: Add support for configfs"
Ashay Jaiswal [Wed, 30 Nov 2016 06:12:36 +0000 (11:42 +0530)]
qcom-charger: smb2: add support of PMFALCON
Add support of PMFALCON PMIC and enable PMIC specific
workarounds in charger driver.
Change-Id: Id21fde25b9b741b9cb570ab5348959715e53e6cb
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Ashay Jaiswal [Fri, 2 Dec 2016 11:38:22 +0000 (17:08 +0530)]
ARM: dts: msm: fix slave-id of charger and FG on PMFALCON
Charger and Fuel Gauge peripherals are on slave-id 0. Update
charger and FG device node to reflect the same.
Change-Id: I99d1e47a20fd5c3304249aa4f6c64e5967874312
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
xiaonian [Thu, 1 Dec 2016 07:21:26 +0000 (15:21 +0800)]
ARM: dts: msm: change ufs regulators for msmfalcon interposer QRD
Change ufs regulators for msmfalcon interposer QRD. Reduce
maximum power load that can be drawn from vcc and vccq2 supply.
Add the required minimum and maximum voltages of ufs phy.
CRs-Fixed:
1093028
Change-Id: Ic534c518116c18e98bd4e421365831400ef967f4
Signed-off-by: xiaonian <xiaonian@codeaurora.org>
xiaonian [Thu, 1 Dec 2016 06:25:33 +0000 (14:25 +0800)]
ARM: dts: msm: Add sdhc2 regulator for QRD msmfalcon interposer
Add sdhc2 regulator corresponding to HW desgin.
CRs-Fixed:
1096038
Change-Id: Ib763bf5f58155fe2c6001357aa939d8098d2ff14
Signed-off-by: xiaonian <xiaonian@codeaurora.org>
Brahmaji K [Tue, 4 Oct 2016 08:40:23 +0000 (14:10 +0530)]
defconfig: msm: Disable CRYPTO_DEV_QCE config flag for msmfalcon
Disable CONFIG_CRYPTO_DEV_QCE flag from defconfig,
which is not required for msmfalcon.
Change-Id: I29cf58d7069d758239c2f5712e70e94be20a42d3
Signed-off-by: Brahmaji K <bkomma@codeaurora.org>
Linux Build Service Account [Fri, 2 Dec 2016 07:47:41 +0000 (23:47 -0800)]
Merge "msm: mdss: hdcp_1x: remove obsolete code"
Linux Build Service Account [Fri, 2 Dec 2016 07:47:40 +0000 (23:47 -0800)]
Merge "uapi/media: add additional ubwc compressed formats"
Linux Build Service Account [Fri, 2 Dec 2016 07:47:39 +0000 (23:47 -0800)]
Merge "mm: Inform KASAN when allocating pages during isolation"
Linux Build Service Account [Fri, 2 Dec 2016 07:47:38 +0000 (23:47 -0800)]
Merge "net: rmnet_data: Handle leaked packets when adding MAP fields in TX"
Rajesh Kemisetti [Fri, 11 Nov 2016 19:13:22 +0000 (00:43 +0530)]
msm: kgsl: Check MMU type for memory and pagetable operations
Check MMU type for below operations to make NOMMU functional:
- adreno_iommu_set_pt_ctx() tries to set pagetable during context
switch without really checking on type of MMU.
- skip tracking of gpuaddr in case of NoMMU during
kgsl_mem_entry_track_gpuaddr().
- In case of nommu the function kgsl_allocate_global() should
always allocate contiguous memory from CMA.
Change-Id: I8cb59e1475376167c7a8a60c54df0939597f5083
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Taniya Das [Fri, 2 Dec 2016 03:52:38 +0000 (09:22 +0530)]
ARM: dts: msm: Remove clocks associated with GDSC for MSMfalcon/Trition
The clients of each GDSC would take care of any memory requirement of the
associated clocks, so remove them from GDSC.
Change-Id: Ic2df5ba83d1e7166aadc954aa137ec65ffa79133
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Taniya Das [Wed, 30 Nov 2016 05:48:20 +0000 (11:18 +0530)]
clk: msm: Remove overrides from clock header files for common clock
For clients using msm-clk-provider.h and msm-clk.h
header files, no override is expected for COMMON_CLK
framework so fixing the same by conditionally compiling
the clock header files.
Change-Id: I5f7393f3f486a884bfa881a93c01623c3cd2664d
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Linux Build Service Account [Fri, 2 Dec 2016 00:39:41 +0000 (16:39 -0800)]
Merge "sched: pre-allocate colocation groups"
Linux Build Service Account [Fri, 2 Dec 2016 00:39:40 +0000 (16:39 -0800)]
Merge "msm: mdss: restore pipe src/dst rect after multiple PU ROI update"
Linux Build Service Account [Fri, 2 Dec 2016 00:39:38 +0000 (16:39 -0800)]
Merge "ASoc: msm: qdsp6v2: Add TX app type support in compress driver"
Linux Build Service Account [Fri, 2 Dec 2016 00:39:37 +0000 (16:39 -0800)]
Merge "msm: camera: fix bound check of offset to avoid overread overwrite"
Linux Build Service Account [Fri, 2 Dec 2016 00:39:36 +0000 (16:39 -0800)]
Merge "msm: camera: Print kernel pointer using correct specifier"
Linux Build Service Account [Fri, 2 Dec 2016 00:39:35 +0000 (16:39 -0800)]
Merge "msm: camera: jpegdma: Check for compat config"
Linux Build Service Account [Fri, 2 Dec 2016 00:39:34 +0000 (16:39 -0800)]
Merge "msm: camera2: cpp: Added secure buffer [un]mapping"
Linux Build Service Account [Fri, 2 Dec 2016 00:39:32 +0000 (16:39 -0800)]
Merge "msm: mdss: dp: set crypto clock rate"
Linux Build Service Account [Fri, 2 Dec 2016 00:39:31 +0000 (16:39 -0800)]
Merge "msm: mdss: hdcp_1x: update hdcp state on link integrity failures"
Linux Build Service Account [Fri, 2 Dec 2016 00:39:31 +0000 (16:39 -0800)]
Merge "msm: mdss: dp: hdcp 2.2: add support for interrupt handling"
Linux Build Service Account [Fri, 2 Dec 2016 00:39:29 +0000 (16:39 -0800)]
Merge "msm: mdss: avoid scheduling pp work during continuous updates"
abeykun [Fri, 11 Nov 2016 15:36:54 +0000 (10:36 -0500)]
uapi/media: add additional ubwc compressed formats
Patch adds RGB565, RGBA 10-bit and P010 10-bit ubwc
compressed formats support to media API planes calculation.
Also fix in align macro when alignment is not a power of 2.
CRs-Fixed:
1096408
Change-Id: I4afcf7d5b22395eeda2e77131bd45592abaeb561
Signed-off-by: abeykun <abeykun@codeaurora.org>
Signed-off-by: Umesh Pandey <umeshp@codeaurora.org>
Ajay Singh Parmar [Sat, 19 Nov 2016 07:10:25 +0000 (23:10 -0800)]
msm: mdss: hdcp_1x: remove obsolete code
Remove HLOS and TZ communication mechanism which is
using SCM APIs. New hardware supports programming in
HLOS itself. Also, communication is now handled by
qseecom APIs. This makes SCM code obsolete and redundant.
Remove any such code which is not being used in current
hardware.
Change-Id: I9b120b88f92be517d1734697625038b28b32feb1
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Subbaraman Narayanamurthy [Wed, 30 Nov 2016 00:53:39 +0000 (16:53 -0800)]
ARM: dts: msm: Update ascent battery profile for GEN3 FG
As per the recent battery characterization, update the profile
data for ascent battery used with pmi8998 FG.
Change-Id: I405cb68749f63f6f779e4f3c2b47065b02ec07de
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Joonwoo Park [Mon, 28 Nov 2016 21:41:18 +0000 (13:41 -0800)]
sched: pre-allocate colocation groups
At present, sched_set_group_id() dynamically allocates structure for
colocation group to assign the given task to the group. However
this can cause deadlock as memory allocator can wakeup a task which
also tries to acquire related_thread_group_lock.
Avoid such deadlock by pre-allocating colocation structures. This
limits maximum colocation groups to static number but it's fine as it's
never expected to be a lot.
Change-Id: Ifc32ab4ead63c382ae390358ed86f7cc5b6eb2dc
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Yuanyuan Liu [Thu, 1 Dec 2016 18:55:25 +0000 (10:55 -0800)]
icnss: Add support of setting MAC address from platform driver
Add support of setting WLAN MAC address from platform driver.
The MAC address will be passed to WLAN driver when WLAN is
turned on.
CRs-Fixed:
1096286
Change-Id: I249222b419dd130241cbc84f4d41709b408941e0
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
Veera Sundaram Sankaran [Wed, 30 Nov 2016 22:27:19 +0000 (14:27 -0800)]
msm: mdss: restore pipe src/dst rect after multiple PU ROI update
During multiple partial update, each pipe is checked against
the two ROIs and the pipe's src and dst rect are cropped and
adjusted with respect to first_roi or second_roi, based on its
position. If the pipe is used with the same configs in the next
kickoff, restore the pipe's actual src/dst before continuing with
the kickoff.
Change-Id: I1db579626d96302e07fef1a755fb39944d3eaca8
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Satish Babu Patakokila [Wed, 3 Aug 2016 15:54:53 +0000 (21:24 +0530)]
ASoc: msm: qdsp6v2: Add TX app type support in compress driver
Add TX app type support in compress driver to support different
post processing modules per COPP in the TX path
CRs-fixed:
1072067
Change-Id: I8e84577b5aff5e932632c4612a88808615d764ae
Signed-off-by: Satish Babu Patakokila <sbpata@codeaurora.org>
Satish Babu Patakokila [Wed, 3 Aug 2016 15:17:59 +0000 (20:47 +0530)]
ASoc: msm: qdsp6v2: Add timestamp support for compress capture
Add timestamp support for compress driver.
Modify ASM driver to read the buffer from predefined offset.
CRs-fixed:
1072067
Change-Id: I1c46befc223285495b3c0650e6c3eaae81f58771
Signed-off-by: Satish Babu Patakokila <sbpata@codeaurora.org>
Linux Build Service Account [Thu, 1 Dec 2016 17:23:50 +0000 (09:23 -0800)]
Merge "msm: hdcp: add response timeout and new messages for sink"
Linux Build Service Account [Thu, 1 Dec 2016 17:23:49 +0000 (09:23 -0800)]
Merge "Input: synaptics: check input, prevent sysfs races"
Linux Build Service Account [Thu, 1 Dec 2016 17:23:47 +0000 (09:23 -0800)]
Merge "mmc: core: check if CQE is already disabled before halt/unhalt"
Linux Build Service Account [Thu, 1 Dec 2016 17:23:46 +0000 (09:23 -0800)]
Merge "msm: mdss: add support to set mdp clock rate before enable"
Linux Build Service Account [Thu, 1 Dec 2016 17:23:45 +0000 (09:23 -0800)]
Merge "msm ipa3: fix blocking faulty IOCTLs"
Linux Build Service Account [Thu, 1 Dec 2016 17:23:45 +0000 (09:23 -0800)]
Merge "mmc: block: send CMD13 when a response error detected in CQ mode"
Ajay Agarwal [Thu, 27 Oct 2016 13:42:50 +0000 (19:12 +0530)]
usb: gadget: f_rmnet: Add support for configfs
Add APIs to allocate and instanciate f_rmnet function
driver using configFS.
Change-Id: Iad76a7e317dd9caf846dbe870baee63a8c5ce6c1
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Sayali Lokhande [Mon, 21 Nov 2016 14:47:43 +0000 (20:17 +0530)]
ARM: dts: msm: Add sdhc2 support for msmfalcon interposer
Add sdhc2 support to enable SD card for msmfalcon
interposer platform.
Change-Id: I22df2ab1210d0ec7da1ac394e6c61beaa52eb712
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Sahitya Tummala [Tue, 26 Apr 2016 09:30:04 +0000 (15:00 +0530)]
mmc: core: check if CQE is already disabled before halt/unhalt
Upon any CQ error, the driver tries to halt the CQE first and
if it fails to halt, then CQE is disabled. The error handling
work function mmc_blk_cmdq_err() also tries to HALT the CQE
at couple of places and takes some action based on the HALT
success/error status. But since CQE is disabled, we should not
treat any errors of CQE halt/unhalt as critical and in fact,
we should not even attempt to halt/unhalt.
Change-Id: I6bef9f2c033f78ad0959954acc5d7627e8a92139
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Sahitya Tummala [Tue, 26 Apr 2016 09:31:04 +0000 (15:01 +0530)]
mmc: cmdq_hci: enable legacy interrupts when CQ is disabled upon error
The legacy interrupts are enabled as part of CQE halt. But there could
be few cases, where halt fails. In those cases, CQE is disabled without
enabling legacy interrupts. Without this we cannot send any commands
like status CMD13 in legacy mode as part of error handling work.
Change-Id: I944ab4060e779c7f41a945532e6a65c30797d40f
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Sahitya Tummala [Tue, 26 Apr 2016 11:01:03 +0000 (16:31 +0530)]
mmc: sdhci: Handle legacy commands sent in CQ error cases properly
There could be cases where CQE halt might fail and in which
case, CQE gets disabled as part of error handling.
In this case, !mmc_host_halt() will be true and the commands
sent in legacy mode are getting software request timeout errors
as they are getting handled as cmdq irq.
Hence, add !mmc_host_cq_disable() check as well in addition to
!mmc_host_halt() in sdhci_irq() before considering it as a
cmdq irq.
Change-Id: Ic529aae53fdecd6b9ecbb17ba13147964dce55dc
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Ajay Singh Parmar [Tue, 29 Nov 2016 23:35:54 +0000 (15:35 -0800)]
msm: hdcp: add response timeout and new messages for sink
As per hdcp 2.2 specifications, send the stream type message
to sink at a specified address in case sink is a receiver.
Update the messages to be sent to sink with the message received
from TZ and tear down the session in case it time's out.
Also, enable encryption after stream management message
exchange for hdcp repeaters to avoid unnecessary link failures.
Change-Id: Ib77756c942abfbdd6e1522a3238d5d8499496fc9
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Andrew Chant [Thu, 15 Sep 2016 23:19:50 +0000 (16:19 -0700)]
Input: synaptics: check input, prevent sysfs races
concurrent sysfs calls on the fw updater can cause
ugly race conditions. Return EBUSY on concurrent sysfs calls.
For sysfs calls which generate deferred work, prevent
the deferred work from running concurrently with other
sysfs calls.
Also check that ext_data_source is appropriately sized
and allocated, based on a patch by
Gengjia Chen (chengjia4574@gmail.com).
Signed-off-by: Andrew Chant <achant@google.com>
Change-Id:I5bbe4992f3fd2d23db288296eaeb61f5831098e9
Bug:
30799828
Bug:
31252388
Git-repo: https://android.googlesource.com/kernel/msm.git
Git-commit:
287ce2ccfefe68067c1f9f5175b6664bf7397fe6
Signed-off-by: Srinivasa Rao Kuppala <srkupp@codeaurora.org>
Maheshwar Ajja [Thu, 1 Dec 2016 02:32:54 +0000 (18:32 -0800)]
ARM: dts: msm: Set max non secure region to 0xE0000000 on msm8998
Video hardware on msm8998 chipset limits the max non secure region
address to 0xE0000000. So reduce non secure region size to 0x6f800000
from 0x8f800000 to limit the max address to 0xE0000000.
CRs-Fixed:
1092881
Change-Id: Ib9602aa2298caf01ab01b4e0225c112c71bb81f4
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Linux Build Service Account [Thu, 1 Dec 2016 00:28:03 +0000 (16:28 -0800)]
Merge "ARM: dts: msm: Add qseecom device node for msmfalcon"
Ajay Singh Parmar [Tue, 29 Nov 2016 22:57:43 +0000 (14:57 -0800)]
msm: mdss: dp: set crypto clock rate
Crypto clock is needed for HDCP 1.x/2.x encryption. If not set,
it may result in link integrity failure as source and sink may
go out of synchronization. Set the crypto clock rate as per
hardware recommendations.
Change-Id: I768b3390fbe4728be285424d0ce27981e1a5d6cb
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Maheshwar Ajja [Tue, 29 Nov 2016 21:14:11 +0000 (13:14 -0800)]
msm: vidc: fix lock issue in msm_comm_get_mbs_per_sec()
Forward thread acquired v4l2_ctrl->handler->lock in
v4l2_s_ctrl() and waiting for response from response thread.
Response thread was blocked on core->lock which was acquired
by second forward thread. The second forward thread acquired
core->lock and called v4l2_g_ctrl() in msm_comm_get_mbs_per_sec()
where it was blocked on same v4l2_ctrl->handler->lock and hence
response thread was not unblocked. Resolve the deadlock issue
by avoiding v4l2_g_ctrl() call in msm_comm_get_mbs_per_sec().
CRs-Fixed:
1095539
Change-Id: I73c2a74f1bb86f2b0359be54ed4f7675051db7b0
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Ajay Singh Parmar [Tue, 29 Nov 2016 23:23:53 +0000 (15:23 -0800)]
msm: mdss: dp: hdcp 2.2: add support for interrupt handling
Enable the interrupts required by hdcp 2.2 to update the hdcp 2.2
state machine as per hardware status.
Change-Id: Ib551b1fe8641203b66a31e745d5091641b4d0ae2
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Amir Levy [Mon, 28 Nov 2016 10:12:01 +0000 (12:12 +0200)]
msm ipa3: fix blocking faulty IOCTLs
This change prevents blocking IOCTLs with wrong command
number or wrong magic Number. IOCTL handler should first
check that the command is valid and only then wait for
IPA driver initializations to finish.
CRs-Fixed:
1094653
Signed-off-by: Amir Levy <alevy@codeaurora.org>
Change-Id: I578dc96da96f7c10be51eac1f8b3c190e45dcfcf
Ajay Agarwal [Fri, 21 Oct 2016 05:10:45 +0000 (10:40 +0530)]
usb: gadget: Add RMNET support using IPA over BAM2BAM
This change adds RMNET support using IPA over BAM2BAM.
Removes all different supported control and data
transports and assumes BAM2BAM_IPA as default mode.
Cleans up QTI Control driver to support only RMNET
and DPL.
Change-Id: I5b763acfb28c2f1832874af786704835314fa9c7
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Linux Build Service Account [Wed, 30 Nov 2016 13:41:00 +0000 (05:41 -0800)]
Merge "msm: mdss: Fix null pointer reference during debug init"
Linux Build Service Account [Wed, 30 Nov 2016 13:40:59 +0000 (05:40 -0800)]
Merge "msm: mdss: Add HFP_CALC_CLK way to switch frame rate"
Linux Build Service Account [Wed, 30 Nov 2016 13:40:58 +0000 (05:40 -0800)]
Merge "msm: mdss: change error return value for lineptr sysfs entries"
Linux Build Service Account [Wed, 30 Nov 2016 13:40:57 +0000 (05:40 -0800)]
Merge "msm: crypto: set CLR_CNTXT bit for crypto operations"
Linux Build Service Account [Wed, 30 Nov 2016 13:40:55 +0000 (05:40 -0800)]
Merge "ARM: dts: msm: Camera configuration for msmfalcon interposer"
Linux Build Service Account [Wed, 30 Nov 2016 13:40:54 +0000 (05:40 -0800)]
Merge "ARM: dts: msm: Add property to support multiple sensor"
Linux Build Service Account [Wed, 30 Nov 2016 13:40:54 +0000 (05:40 -0800)]
Merge "ARM: dts: msm: Add actuator and flash src for msm8998 qrd skuk board"
Linux Build Service Account [Wed, 30 Nov 2016 00:18:50 +0000 (16:18 -0800)]
Merge "msm: isp: Add support to multipass offline ISP"
Linux Build Service Account [Wed, 30 Nov 2016 00:18:49 +0000 (16:18 -0800)]
Merge "msm: camera: sensor: Validate i2c_frq_mode in msm_cci_get_clk_rates"
Linux Build Service Account [Wed, 30 Nov 2016 00:18:48 +0000 (16:18 -0800)]
Merge "msm: camera: isp: Change declaration for VFE clock"
Linux Build Service Account [Wed, 30 Nov 2016 00:18:47 +0000 (16:18 -0800)]
Merge "msm: kgsl: Update ringbuffer timer when preemption completes"
Linux Build Service Account [Wed, 30 Nov 2016 00:18:46 +0000 (16:18 -0800)]
Merge "ARM: dts: msm: Add msm-core device for msmfalcon"
Linux Build Service Account [Wed, 30 Nov 2016 00:18:45 +0000 (16:18 -0800)]
Merge "ARM: dts: msm: add demo battery profile to msm8998 MTP"
Linux Build Service Account [Wed, 30 Nov 2016 00:18:44 +0000 (16:18 -0800)]
Merge "ARM: dts: msm: add a demo battery profile for pmi8998 FG"
Linux Build Service Account [Wed, 30 Nov 2016 00:18:43 +0000 (16:18 -0800)]
Merge "msm: cpp: Fix for buffer overflow in cpp."
Ajay Singh Parmar [Tue, 29 Nov 2016 23:45:14 +0000 (15:45 -0800)]
msm: mdss: hdcp_1x: update hdcp state on link integrity failures
In case of link integrity failures reported by sink, tear down
the hdcp session. Complete any thread waiting for a response
from sink as part of hdcp protocol to avoid unnecessary delays
in starting new hdcp session.
Change-Id: I0afc56e0177ceccf76b717a483584f7ad5055fe1
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Jayant Shekhar [Tue, 12 Jul 2016 06:01:59 +0000 (11:31 +0530)]
msm: mdss: Fix null pointer reference during debug init
Some targets doesn't seem to have vbif_nrt_phys in dtsi
file but we still register the debug node for vbif_nrt_reg
and off without checking whether it exists or not. Ensure
this is checked to avoid null pointer reference.
Change-Id: Icce8823f80e586bc4827d8db18dceb2fb866c2f9
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
feifanz [Fri, 17 Jun 2016 02:54:03 +0000 (10:54 +0800)]
msm: mdss: Add HFP_CALC_CLK way to switch frame rate
Add support to switch non-standard framerate.To achieve this,
first map the fps to standard fps and then tune pixel clock
based non-standard framerate. Panel porches might need update
before pixel clock tuning based on standard framerate mapping.
CRs-fixed:
1032036
Change-Id: I49995875338cd2a3b57e88753cfda1bfa97910dd
Signed-off-by: feifanz <feifanz@codeaurora.org>
Signed-off-by: Krishna Srinivas <krisrini@codeaurora.org>
Sandeep Panda [Tue, 17 May 2016 10:02:40 +0000 (15:32 +0530)]
msm: mdss: Access DSI registers before turning off clock
BTA complete interrupt comes and turns off the clocks. In another
thread we read the panel status and DSI ack returns error. In the
error condition we are trying to read some DSI registers even
when the clocks are turned off.
Change-Id: Ica77c16f3cf4b69f46c9003bb299c6413e199468
Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Krishna Chaitanya Devarakonda [Thu, 30 Jun 2016 14:01:12 +0000 (19:31 +0530)]
msm: mdss: change error return value for lineptr sysfs entries
Changing the error return value for lineptr sysfs entries, when
the sysfs operation is not allowed. Returning EAGAIN might make
the verification tests to continuously query the sysfs nodes, or
block it. Returning EPERM will fail the query, which is expected.
Change-Id: I43500c07a318da9e2624a1631134228ad45e1cc7
Signed-off-by: Krishna Chaitanya Devarakonda <kdevarak@codeaurora.org>
Xu Han [Tue, 29 Nov 2016 20:29:52 +0000 (12:29 -0800)]
ARM: dts: msm: Change camera mount angle for msm8998 QRD device
Change rear and front camera mount angles to have proper orientation.
Change-Id: I7e06e71e0f30d5fa030af52c0bc297f6530bb2fb
CRs-fixed:
1069735
Signed-off-by: Xu Han <hanxu@codeaurora.org>
Harshdeep Dhatt [Tue, 22 Nov 2016 23:14:44 +0000 (16:14 -0700)]
msm: kgsl: Update ringbuffer timer when preemption completes
Ringbuffer timer should always be reset whenever we finish
preempting to that ringbuffer. Currently, there is a case where
wptr in the hardware and the kgsl are identical and thus
the timer isn't reset. Reset the timer regardless if they are
identical or not.
There is one special case when we shouldn't reset the timer.
This happens when we try to figure out next ringbuffer to preempt
but the next ringbuffer is the same one as current. In that case,
if nothing new got submitted to this ringbuffer, then don't reset
the timer.
Change-Id: I6b5aea46f1769021b39ba6e135bef780719a92e7
Signed-off-by: Harshdeep Dhatt <hdhatt@codeaurora.org>
Linux Build Service Account [Tue, 29 Nov 2016 15:44:09 +0000 (07:44 -0800)]
Merge "Crash due to mutex genl_lock called from RCU context"