OSDN Git Service
Junio C Hamano [Tue, 28 Mar 2017 20:52:24 +0000 (13:52 -0700)]
Merge branch 'st/verify-tag' into maint
A few unterminated here documents in tests were fixed, which in
turn revealed incorrect expectations the tests make. These tests
have been updated.
* st/verify-tag:
t7004, t7030: fix here-doc syntax errors
Junio C Hamano [Tue, 28 Mar 2017 20:52:24 +0000 (13:52 -0700)]
Merge branch 'js/regexec-buf' into maint
Fix for potential segv introduced in v2.11.0 and later (also
v2.10.2).
* js/regexec-buf:
pickaxe: fix segfault with '-S<...> --pickaxe-regex'
Junio C Hamano [Tue, 28 Mar 2017 20:52:23 +0000 (13:52 -0700)]
Merge branch 'jk/execv-dashed-external' into maint
Fix for NO_PTHREADS build.
* jk/execv-dashed-external:
run-command: fix segfault when cleaning forked async process
Junio C Hamano [Tue, 28 Mar 2017 20:52:23 +0000 (13:52 -0700)]
Merge branch 'ew/http-alternates-as-redirects-warning' into maint
Recent versions of Git treats http alternates (used in dumb http
transport) just like HTTP redirects and requires the client to
enable following it, due to security concerns. But we forgot to
give a warning when we decide not to honor the alternates.
* ew/http-alternates-as-redirects-warning:
http: release strbuf on disabled alternates
http: inform about alternates-as-redirects behavior
Junio C Hamano [Tue, 28 Mar 2017 20:52:22 +0000 (13:52 -0700)]
Merge branch 'dp/filter-branch-prune-empty' into maint
"git filter-branch --prune-empty" drops a single-parent commit that
becomes a no-op, but did not drop a root commit whose tree is empty.
* dp/filter-branch-prune-empty:
p7000: add test for filter-branch with --prune-empty
filter-branch: fix --prune-empty on parentless commits
t7003: ensure --prune-empty removes entire branch when applicable
t7003: ensure --prune-empty can prune root commit
Junio C Hamano [Tue, 28 Mar 2017 20:52:22 +0000 (13:52 -0700)]
Merge branch 'mm/fetch-show-error-message-on-unadvertised-object' into maint
"git fetch" that requests a commit by object name, when the other
side does not allow such an request, failed without much
explanation.
* mm/fetch-show-error-message-on-unadvertised-object:
fetch-pack: add specific error for fetching an unadvertised object
fetch_refs_via_pack: call report_unmatched_refs
fetch-pack: move code to report unmatched refs to a function
Junio C Hamano [Tue, 28 Mar 2017 20:52:22 +0000 (13:52 -0700)]
Merge branch 'jk/interpret-branch-name' into maint
"git branch @" created refs/heads/@ as a branch, and in general the
code that handled @{-1} and @{upstream} was a bit too loose in
disambiguating.
* jk/interpret-branch-name:
checkout: restrict @-expansions when finding branch
strbuf_check_ref_format(): expand only local branches
branch: restrict @-expansions when deleting
t3204: test git-branch @-expansion corner cases
interpret_branch_name: allow callers to restrict expansions
strbuf_branchname: add docstring
strbuf_branchname: drop return value
interpret_branch_name: move docstring to header file
interpret_branch_name(): handle auto-namelen for @{-1}
Junio C Hamano [Tue, 28 Mar 2017 20:52:21 +0000 (13:52 -0700)]
Merge branch 'ab/cond-skip-tests' into maint
A few tests were run conditionally under (rare) conditions where
they cannot be run (like running cvs tests under 'root' account).
* ab/cond-skip-tests:
gitweb tests: skip tests when we don't have Time::HiRes
gitweb tests: change confusing "skip_all" phrasing
cvs tests: skip tests that call "cvs commit" when running as root
Junio C Hamano [Tue, 28 Mar 2017 20:52:21 +0000 (13:52 -0700)]
Merge branch 'jk/ident-empty' into maint
user.email that consists of only cruft chars should consistently
error out, but didn't.
* jk/ident-empty:
ident: do not ignore empty config name/email
ident: reject all-crud ident name
ident: handle NULL email when complaining of empty name
ident: mark error messages for translation
Junio C Hamano [Tue, 28 Mar 2017 20:52:20 +0000 (13:52 -0700)]
Merge branch 'jk/delta-chain-limit' into maint
"git repack --depth=<n>" for a long time busted the specified depth
when reusing delta from existing packs. This has been corrected.
* jk/delta-chain-limit:
pack-objects: convert recursion to iteration in break_delta_chain()
pack-objects: enforce --depth limit in reused deltas
Junio C Hamano [Tue, 28 Mar 2017 20:52:20 +0000 (13:52 -0700)]
Merge branch 'sg/test-with-stdin' into maint
Teach the "debug" helper used in the test framework that allows a
command to run under "gdb" to make the session interactive.
* sg/test-with-stdin:
tests: make the 'test_pause' helper work in non-verbose mode
tests: create an interactive gdb session with the 'debug' helper
Junio C Hamano [Tue, 28 Mar 2017 20:52:20 +0000 (13:52 -0700)]
Merge branch 'jk/interop-test' into maint
Picking two versions of Git and running tests to make sure the
older one and the newer one interoperate happily has now become
possible.
* jk/interop-test:
t/interop: add test of old clients against modern git-daemon
t: add an interoperability test harness
Junio C Hamano [Tue, 28 Mar 2017 20:52:19 +0000 (13:52 -0700)]
Merge branch 'jt/perf-updates' into maint
The t/perf performance test suite was not prepared to test not so
old versions of Git, but now it covers versions of Git that are not
so ancient.
* jt/perf-updates:
t/perf: add fallback for pre-bin-wrappers versions of git
t/perf: use $MODERN_GIT for all repo-copying steps
t/perf: export variable used in other blocks
Junio C Hamano [Tue, 28 Mar 2017 20:52:19 +0000 (13:52 -0700)]
Merge branch 'rs/strbuf-add-real-path' into maint
An helper function to make it easier to append the result from
real_path() to a strbuf has been added.
* rs/strbuf-add-real-path:
strbuf: add strbuf_add_real_path()
cocci: use ALLOC_ARRAY
Junio C Hamano [Tue, 28 Mar 2017 20:52:18 +0000 (13:52 -0700)]
Merge branch 'jk/parse-config-key-cleanup' into maint
The "parse_config_key()" API function has been cleaned up.
* jk/parse-config-key-cleanup:
parse_hide_refs_config: tell parse_config_key we don't want a subsection
parse_config_key: allow matching single-level config
parse_config_key: use skip_prefix instead of starts_with
refs: parse_hide_refs_config to use parse_config_key
Junio C Hamano [Fri, 24 Mar 2017 19:59:15 +0000 (12:59 -0700)]
Git 2.12.2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 24 Mar 2017 19:57:55 +0000 (12:57 -0700)]
Merge branch 'ab/doc-no-option-notation-fix' into maint
Doc fix.
* ab/doc-no-option-notation-fix:
doc: change erroneous --[no]-whatever into --[no-]whatever
Junio C Hamano [Fri, 24 Mar 2017 19:57:54 +0000 (12:57 -0700)]
Merge branch 'ab/push-default-doc-fix' into maint
Doc fix.
* ab/push-default-doc-fix:
push: mention "push.default=tracking" in the documentation
Junio C Hamano [Fri, 24 Mar 2017 19:57:54 +0000 (12:57 -0700)]
Merge branch 'nd/commit-hook-doc-fix' into maint
Doc fix.
* nd/commit-hook-doc-fix:
git-commit.txt: list post-rewrite in HOOKS section
Junio C Hamano [Fri, 24 Mar 2017 19:57:54 +0000 (12:57 -0700)]
Merge branch 'jc/config-case-cmdline-take-2' into maint
The code to parse "git -c VAR=VAL cmd" and set configuration
variable for the duration of cmd had two small bugs, which have
been fixed.
This supersedes jc/config-case-cmdline topic that has been discarded.
* jc/config-case-cmdline-take-2:
config: use git_config_parse_key() in git_config_parse_parameter()
config: move a few helper functions up
Junio C Hamano [Fri, 24 Mar 2017 19:57:53 +0000 (12:57 -0700)]
Merge branch 'jk/grep-no-index-fix' into maint
The code to parse the command line "git grep <patterns>... <rev>
[[--] <pathspec>...]" has been cleaned up, and a handful of bugs
have been fixed (e.g. we used to check "--" if it is a rev).
* jk/grep-no-index-fix:
grep: treat revs the same for --untracked as for --no-index
grep: do not diagnose misspelt revs with --no-index
grep: avoid resolving revision names in --no-index case
grep: fix "--" rev/pathspec disambiguation
grep: re-order rev-parsing loop
grep: do not unnecessarily query repo for "--"
grep: move thread initialization a little lower
Junio C Hamano [Fri, 24 Mar 2017 19:57:53 +0000 (12:57 -0700)]
Merge branch 'jn/remote-helpers-with-git-dir' into maint
"git ls-remote" and "git archive --remote" are designed to work
without being in a directory under Git's control. However, recent
updates revealed that we randomly look into a directory called
.git/ without actually doing necessary set-up when working in a
repository. Stop doing so.
* jn/remote-helpers-with-git-dir:
remote helpers: avoid blind fall-back to ".git" when setting GIT_DIR
remote: avoid reading $GIT_DIR config in non-repo
Junio C Hamano [Fri, 24 Mar 2017 19:57:52 +0000 (12:57 -0700)]
Merge branch 'sb/submodule-config-parse-ignore-fix' into maint
Code to read submodule.<name>.ignore config did not state the
variable name correctly when giving an error message diagnosing
misconfiguration.
* sb/submodule-config-parse-ignore-fix:
submodule-config: correct error reporting for invalid ignore value
Junio C Hamano [Fri, 24 Mar 2017 19:57:52 +0000 (12:57 -0700)]
Merge branch 'jk/push-deadlock-regression-fix' into maint
"git push" had a handful of codepaths that could lead to a deadlock
when unexpected error happened, which has been fixed.
* jk/push-deadlock-regression-fix:
send-pack: report signal death of pack-objects
send-pack: read "unpack" status even on pack-objects failure
send-pack: improve unpack-status error messages
send-pack: use skip_prefix for parsing unpack status
send-pack: extract parsing of "unpack" response
receive-pack: fix deadlock when we cannot create tmpdir
Michael J Gruber [Fri, 24 Mar 2017 14:01:36 +0000 (15:01 +0100)]
mailmap: use Michael J Gruber's new address
Map both old addresses to the new, hopefully more permanent one.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Santiago Torres [Thu, 23 Mar 2017 22:28:47 +0000 (18:28 -0400)]
t7004, t7030: fix here-doc syntax errors
Jan Palus noticed that some here-doc are spelled incorrectly,
resulting the entire remainder of the test snippet being slurped
into the "expect" file as if it were data, e.g. in this sequence
cat >expect <<EOF &&
... expectation ...
EOF
git $cmd_being_tested >actual &&
test_cmp expect actual
the last command of the test is "cat" that sends everything to
'expect' and succeeds.
Fixing these issues in t7004 and t7030 reveals that "git tag -v"
and "git verify-tag" with their --format option do not work as the
test was expecting originally. Instead of showing both valid tags
and tags with incorrect signatures on their output, tags that do not
pass verification are omitted from the output. Another breakage that
is uncovered is that these tests must be restricted to environment
where gpg is available.
Arguably, that is a safer behaviour, and because the format
specifiers like %(tag) do not have a way to show if the signature
verifies correctly, the command with the --format option cannot be
used to get a list of tags annotated with their signature validity
anyway.
For now, let's fix the here-doc syntax, update the expectation to
match the reality, and update the test prerequisite.
Maybe later when we extend the --format language available to "git
tag -v" and "git verify-tag" to include things like "%(gpg:status)",
we may want to change the behaviour so that piping a list of tag
names into
xargs git verify-tag --format='%(gpg:status) %(tag)'
becomes a good way to produce such a list, but that is a separate
topic.
Noticed-by: Jan Palus <jan.palus@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Santiago Torres <santiago@nyu.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 21 Mar 2017 22:04:12 +0000 (15:04 -0700)]
Prepare for 2.12.2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 21 Mar 2017 22:03:30 +0000 (15:03 -0700)]
Merge branch 'jh/send-email-one-cc' into maint
"Cc:" on the trailer part does not have to conform to RFC strictly,
unlike in the e-mail header. "git send-email" has been updated to
ignore anything after '>' when picking addresses, to allow non-address
cruft like " # stable 4.4" after the address.
* jh/send-email-one-cc:
send-email: only allow one address per body tag
Junio C Hamano [Tue, 21 Mar 2017 22:03:30 +0000 (15:03 -0700)]
Merge branch 'jk/t6300-cleanup' into maint
A test that creates a confusing branch whose name is HEAD has been
corrected not to do so.
* jk/t6300-cleanup:
t6300: avoid creating refs/heads/HEAD
Junio C Hamano [Tue, 21 Mar 2017 22:03:29 +0000 (15:03 -0700)]
Merge branch 'rs/commit-parsing-optim' into maint
The code that parses header fields in the commit object has been
updated for (micro)performance and code hygiene.
* rs/commit-parsing-optim:
commit: don't check for space twice when looking for header
commit: be more precise when searching for headers
Junio C Hamano [Tue, 21 Mar 2017 22:03:29 +0000 (15:03 -0700)]
Merge branch 'jk/show-branch-lift-name-len-limit' into maint
"git show-branch" expected there were only very short branch names
in the repository and used a fixed-length buffer to hold them
without checking for overflow.
* jk/show-branch-lift-name-len-limit:
show-branch: use skip_prefix to drop magic numbers
show-branch: store resolved head in heap buffer
show-branch: drop head_len variable
Junio C Hamano [Tue, 21 Mar 2017 22:03:28 +0000 (15:03 -0700)]
Merge branch 'jk/tempfile-ferror-fclose-confusion' into maint
A caller of tempfile API that uses stdio interface to write to
files may ignore errors while writing, which is detected when
tempfile is closed (with a call to ferror()). By that time, the
original errno that may have told us what went wrong is likely to
be long gone and was overwritten by an irrelevant value.
close_tempfile() now resets errno to EIO to make errno at least
predictable.
* jk/tempfile-ferror-fclose-confusion:
tempfile: set errno to a known value before calling ferror()
Junio C Hamano [Tue, 21 Mar 2017 22:03:28 +0000 (15:03 -0700)]
Merge branch 'rl/remote-allow-missing-branch-name-merge' into maint
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
Junio C Hamano [Tue, 21 Mar 2017 22:03:28 +0000 (15:03 -0700)]
Merge branch 'dt/gc-ignore-old-gc-logs' into maint
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
Junio C Hamano [Tue, 21 Mar 2017 22:03:27 +0000 (15:03 -0700)]
Merge branch 'jt/upload-pack-error-report' into maint
"git upload-pack", which is a counter-part of "git fetch", did not
report a request for a ref that was not advertised as invalid.
This is generally not a problem (because "git fetch" will stop
before making such a request), but is the right thing to do.
* jt/upload-pack-error-report:
upload-pack: report "not our ref" to client
Junio C Hamano [Tue, 21 Mar 2017 22:03:27 +0000 (15:03 -0700)]
Merge branch 'rs/sha1-file-plug-fallback-base-leak' into maint
A leak in a codepath to read from a packed object in (rare) cases
has been plugged.
* rs/sha1-file-plug-fallback-base-leak:
sha1_file: release fallback base's memory in unpack_entry()
Junio C Hamano [Tue, 21 Mar 2017 22:03:26 +0000 (15:03 -0700)]
Merge branch 'ss/remote-bzr-hg-placeholder-wo-python' into maint
There is no need for Python only to give a few messages to the
standard error stream, but we somehow did.
* ss/remote-bzr-hg-placeholder-wo-python:
contrib: git-remote-{bzr,hg} placeholders don't need Python
Junio C Hamano [Tue, 21 Mar 2017 22:03:26 +0000 (15:03 -0700)]
Merge branch 'jc/diff-populate-filespec-size-only-fix' into maint
"git diff --quiet" relies on the size field in diff_filespec to be
correctly populated, but diff_populate_filespec() helper function
made an incorrect short-cut when asked only to populate the size
field for paths that need to go through convert_to_git() (e.g. CRLF
conversion).
* jc/diff-populate-filespec-size-only-fix:
diff: do not short-cut CHECK_SIZE_ONLY check in diff_populate_filespec()
Junio C Hamano [Tue, 21 Mar 2017 22:03:25 +0000 (15:03 -0700)]
Merge branch 'jk/http-walker-buffer-underflow-fix' into maint
"Dumb http" transport used to misparse a nonsense http-alternates
response, which has been fixed.
* jk/http-walker-buffer-underflow-fix:
http-walker: fix buffer underflow processing remote alternates
Junio C Hamano [Tue, 21 Mar 2017 22:03:25 +0000 (15:03 -0700)]
Merge branch 'mg/status-porcelain-no-i18n' into maint
"git status --porcelain" is supposed to give a stable output, but a
few strings were left as translatable by mistake.
* mg/status-porcelain-no-i18n:
git-status: make porcelain more robust
Junio C Hamano [Tue, 21 Mar 2017 22:03:25 +0000 (15:03 -0700)]
Merge branch 'ps/docs-diffcore' into maint
Doc update.
* ps/docs-diffcore:
docs/diffcore: unquote "Complete Rewrites" in headers
docs/diffcore: fix grammar in diffcore-rename header
Junio C Hamano [Tue, 21 Mar 2017 22:03:24 +0000 (15:03 -0700)]
Merge branch 'ew/markdown-url-in-readme' into maint
Doc update.
* ew/markdown-url-in-readme:
README: create HTTP/HTTPS links from URLs in Markdown
Junio C Hamano [Tue, 21 Mar 2017 22:03:24 +0000 (15:03 -0700)]
Merge branch 'rj/remove-unused-mktemp' into maint
Code cleanup.
* rj/remove-unused-mktemp:
wrapper.c: remove unused gitmkstemps() function
wrapper.c: remove unused git_mkstemp() function
Junio C Hamano [Tue, 21 Mar 2017 22:03:23 +0000 (15:03 -0700)]
Merge branch 'jk/ewah-use-right-type-in-sizeof' into maint
Code clean-up.
* jk/ewah-use-right-type-in-sizeof:
ewah: fix eword_t/uint64_t confusion
Junio C Hamano [Mon, 20 Mar 2017 20:17:08 +0000 (13:17 -0700)]
Git 2.12.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ævar Arnfjörð Bjarmason [Sun, 19 Mar 2017 14:36:36 +0000 (14:36 +0000)]
push: mention "push.default=tracking" in the documentation
Change the documentation for push.tracking=* to re-include a mention
of what "tracking" does.
The "tracking" option was renamed to "upstream" back in
53c4031 ("push.default: Rename 'tracking' to 'upstream'", 2011-02-16),
this section was then subsequently rewritten in
87a70e4 ("config doc:
rewrite push.default section", 2013-06-19) to remove any mention of
"tracking".
Maybe we should just warn or die nowadays if this option is in the
config, but I had some old config of mine use this option, I'd
forgotten that it was a synonym, and nothing in git's documentation
mentioned that.
That's bad, either we shouldn't support it at all, or we should
document what it does. This patch does the latter.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nguyễn Thái Ngọc Duy [Sun, 19 Mar 2017 09:01:02 +0000 (16:01 +0700)]
git-commit.txt: list post-rewrite in HOOKS section
The hook was added in
a86ed83cce (Merge branch 'tr/notes-display' -
2010-03-24), which updated githooks.txt but not git-commit.txt.
git-commit.txt was later updated in
e858af6d50 (commit: document a
couple of options - 2012-06-08). Since this commit focused on command
line options, this section was probably forgotten.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ævar Arnfjörð Bjarmason [Mon, 20 Mar 2017 13:20:29 +0000 (13:20 +0000)]
doc: change erroneous --[no]-whatever into --[no-]whatever
Change these two obvious typos to be in line with the rest of the
documentation, which uses the correct --[no-]whatever form.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sat, 18 Mar 2017 18:24:08 +0000 (19:24 +0100)]
pickaxe: fix segfault with '-S<...> --pickaxe-regex'
'git {log,diff,...} -S<...> --pickaxe-regex' can segfault as a result
of out-of-bounds memory reads.
diffcore-pickaxe.c:contains() looks for all matches of the given regex
in a buffer in a loop, advancing the buffer pointer to the end of the
last match in each iteration. When we switched to REG_STARTEND in
b7d36ffca (regex: use regexec_buf(), 2016-09-21), we started passing
the size of that buffer to the regexp engine, too. Unfortunately,
this buffer size is never updated on subsequent iterations, and as the
buffer pointer advances on each iteration, this "bufptr+bufsize"
points past the end of the buffer. This results in segmentation
fault, if that memory can't be accessed. In case of 'git log' it can
also result in erroneously listed commits, if the memory past the end
of buffer is accessible and happens to contain data matching the
regex.
Reduce the buffer size on each iteration as the buffer pointer is
advanced, thus maintaining the correct end of buffer location.
Furthermore, make sure that the buffer pointer is not dereferenced in
the control flow statements when we already reached the end of the
buffer.
The new test is flaky, I've never seen it fail on my Linux box even
without the fix, but this is expected according to
db5dfa3 (regex:
-G<pattern> feeds a non NUL-terminated string to regexec() and fails,
2016-09-21). However, it did fail on Travis CI with the first (and
incomplete) version of the fix, and based on that commit message I
would expect the new test without the fix to fail most of the time on
Windows.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 17 Mar 2017 23:20:04 +0000 (19:20 -0400)]
run-command: fix segfault when cleaning forked async process
Callers of the run-command API may mark a child as
"clean_on_exit"; it gets added to a list and killed when the
main process dies. Since commit
46df6906f
(execv_dashed_external: wait for child on signal death,
2017-01-06), we respect an extra "wait_after_clean" flag,
which we expect to find in the child_process struct.
When Git is built with NO_PTHREADS, we start "struct
async" processes by forking rather than spawning a thread.
The resulting processes get added to the cleanup list but
they don't have a child_process struct, and the cleanup
function ends up dereferencing NULL.
We should notice this case and assume that the processes do
not need to be waited for (i.e., the same behavior they had
before
46df6906f).
Reported-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sat, 18 Mar 2017 16:14:00 +0000 (17:14 +0100)]
tests: make the 'test_pause' helper work in non-verbose mode
When the 'test_pause' helper function invokes the shell mid-test, it
explicitly redirects the shell's stdout and stderr to file descriptors
3 and 4, which are the stdout and stderr of the tests (i.e. where they
would be connected anyway without those redirections). These file
descriptors are only attached to the terminal in verbose mode, hence
the restriction of 'test_pause' to work only with '-v'.
Redirect the shell's stdout and stderr to the test environment's
original stdout and stderr, allowing it to work properly even in
non-verbose mode, and the restriction can be lifted.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sat, 18 Mar 2017 16:13:59 +0000 (17:13 +0100)]
tests: create an interactive gdb session with the 'debug' helper
The 'debug' test helper is supposed to facilitate debugging by running
a command of the test suite under gdb. Unfortunately, its usefulness
is severely limited, because that gdb session is not interactive,
since the test's, and thus gdb's standard input is redirected from
/dev/null (for a good reason, see
781f76b15 (test-lib: redirect stdin
of tests, 2011-12-15)).
Redirect gdb's standard file descriptors from/to the test
environment's stdin, stdout and stderr in the 'debug' helper, thus
creating an interactive gdb session (even in non-verbose mode), which
is much, much more useful.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 16 Mar 2017 21:01:00 +0000 (14:01 -0700)]
Preparing for 2.12.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 16 Mar 2017 20:56:43 +0000 (13:56 -0700)]
Merge branch 'js/realpath-pathdup-fix' into maint
Git v2.12 was shipped with an embarrassing breakage where various
operations that verify paths given from the user stopped dying when
seeing an issue, and instead later triggering segfault.
... and then to down to 'maint'.
* js/realpath-pathdup-fix:
real_pathdup(): fix callsites that wanted it to die on error
t1501: demonstrate NULL pointer access with invalid GIT_WORK_TREE
Junio C Hamano [Thu, 16 Mar 2017 20:56:43 +0000 (13:56 -0700)]
Merge branch 'mm/two-more-xstrfmt' into maint
Code clean-up and a string truncation fix.
* mm/two-more-xstrfmt:
bisect_next_all: convert xsnprintf to xstrfmt
stop_progress_msg: convert xsnprintf to xstrfmt
Junio C Hamano [Thu, 16 Mar 2017 20:56:42 +0000 (13:56 -0700)]
Merge branch 'vn/line-log-memcpy-size-fix' into maint
The command-line parsing of "git log -L" copied internal data
structures using incorrect size on ILP32 systems.
* vn/line-log-memcpy-size-fix:
line-log: use COPY_ARRAY to fix mis-sized memcpy
Junio C Hamano [Thu, 16 Mar 2017 20:56:42 +0000 (13:56 -0700)]
Merge branch 'ax/line-log-range-merge-fix' into maint
The code to parse "git log -L..." command line was buggy when there
are many ranges specified with -L; overrun of the allocated buffer
has been fixed.
* ax/line-log-range-merge-fix:
line-log.c: prevent crash during union of too many ranges
Junio C Hamano [Thu, 16 Mar 2017 20:56:42 +0000 (13:56 -0700)]
Merge branch 'jk/add-i-patch-do-prompt' into maint
The patch subcommand of "git add -i" was meant to have paths
selection prompt just like other subcommand, unlike "git add -p"
directly jumps to hunk selection. Recently, this was broken and
"add -i" lost the paths selection dialog, but it now has been
fixed.
* jk/add-i-patch-do-prompt:
add--interactive: fix missing file prompt for patch mode with "-i"
Junio C Hamano [Thu, 16 Mar 2017 20:56:42 +0000 (13:56 -0700)]
Merge branch 'jt/http-base-url-update-upon-redirect' into maint
When a redirected http transport gets an error during the
redirected request, we ignored the error we got from the server,
and ended up giving a not-so-useful error message.
* jt/http-base-url-update-upon-redirect:
http: attempt updating base URL only if no error
Junio C Hamano [Thu, 16 Mar 2017 20:56:41 +0000 (13:56 -0700)]
Merge branch 'js/travis-32bit-linux' into maint
Add 32-bit Linux variant to the set of platforms to be tested with
Travis CI.
* js/travis-32bit-linux:
Travis: also test on 32-bit Linux
Junio C Hamano [Thu, 16 Mar 2017 20:56:41 +0000 (13:56 -0700)]
Merge branch 'jh/mingw-openssl-sha1' into maint
Windows port wants to use OpenSSL's implementation of SHA-1
routines, so let them.
* jh/mingw-openssl-sha1:
mingw: use OpenSSL's SHA-1 routines
Junio C Hamano [Thu, 16 Mar 2017 20:56:41 +0000 (13:56 -0700)]
Merge branch 'jk/http-auth' into maint
Reduce authentication round-trip over HTTP when the server supports
just a single authentication method.
* jk/http-auth:
http: add an "auto" mode for http.emptyauth
http: restrict auth methods to what the server advertises
Stefan Beller [Tue, 14 Mar 2017 22:14:40 +0000 (15:14 -0700)]
submodule-config: correct error reporting for invalid ignore value
As 'var' contains the whole value we get error messages that repeat
the section and key currently:
warning: Invalid parameter 'true' for config option 'submodule.submodule.plugins/hooks.ignore.ignore'
Fix this by only giving the section name in the warning.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Tue, 14 Mar 2017 16:02:02 +0000 (17:02 +0100)]
git-status: make porcelain more robust
git status provides a porcelain mode for porcelain writers with a
supposedly stable (plumbing) interface.
7a76c28ff2 ("status: disable translation when --porcelain is used", 2014-03-20)
made sure that ahead/behind info is not translated (i.e. is stable).
Make sure that the remaining two strings (initial commit, detached head)
are stable, too.
These changes are for the v1 porcelain interface. While we do have a perfectly
stable v2 porcelain interface now, some tools (such as
powerline-gitstatus) are written against v1 and profit from fixing v1
without any changes on their side.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 13 Mar 2017 14:04:45 +0000 (10:04 -0400)]
http-walker: fix buffer underflow processing remote alternates
If we parse a remote alternates (or http-alternates), we
expect relative lines like:
../../foo.git/objects
which we convert into "$URL/../foo.git/" (and then use that
as a base for fetching more objects).
But if the remote feeds us nonsense like just:
../
we will try to blindly strip the last 7 characters, assuming
they contain the string "objects". Since we don't _have_ 7
characters at all, this results in feeding a small negative
value to strbuf_add(), which converts it to a size_t,
resulting in a big positive value. This should consistently
fail (since we can't generall allocate the max size_t minus
7 bytes), so there shouldn't be any security implications.
Let's fix this by using strbuf_strip_suffix() to drop the
characters we want. If they're not present, we'll ignore the
alternate (in theory we could use it as-is, but the rest of
the http-walker code unconditionally tacks "objects/" back
on, so it is it not prepared to handle such a case).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 25 Feb 2017 09:37:30 +0000 (04:37 -0500)]
t/interop: add test of old clients against modern git-daemon
This test just checks that old clients can clone and fetch
from a newer git-daemon. The opposite should also be true,
but it's hard to test ancient versions of git-daemon because
they lack basic options like "--listen".
Note that we have to make a slight tweak to the
lib-git-daemon helper from the regular tests, so that it
starts the daemon with our correct git.a version.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 25 Feb 2017 09:37:07 +0000 (04:37 -0500)]
t: add an interoperability test harness
The current test suite is good at letting you test a
particular version of Git. But it's not very good at letting
you test _two_ versions and seeing how they interact (e.g.,
one cloning from the other).
This commit adds a test harness that will build two
arbitrary versions of git and make it easy to call them from
inside your tests. See the README and the example script for
details.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Wed, 8 Mar 2017 15:43:40 +0000 (16:43 +0100)]
real_pathdup(): fix callsites that wanted it to die on error
In
4ac9006f832 (real_path: have callers use real_pathdup and
strbuf_realpath, 2016-12-12), we changed the xstrdup(real_path())
pattern to use real_pathdup() directly.
The problem with this change is that real_path() calls
strbuf_realpath() with die_on_error = 1 while real_pathdup() calls
it with die_on_error = 0. Meaning that in cases where real_path()
causes Git to die() with an error message, real_pathdup() is silent
and returns NULL instead.
The callers, however, are ill-prepared for that change, as they expect
the return value to be non-NULL (and otherwise the function died
with an appropriate error message).
Fix this by extending real_pathdup()'s signature to accept the
die_on_error flag and simply pass it through to strbuf_realpath(),
and then adjust all callers after a careful audit whether they would
handle NULLs well.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Wed, 8 Mar 2017 15:43:34 +0000 (16:43 +0100)]
t1501: demonstrate NULL pointer access with invalid GIT_WORK_TREE
When GIT_WORK_TREE does not specify a valid path, we should error
out, instead of crashing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 7 Mar 2017 13:39:48 +0000 (08:39 -0500)]
send-pack: report signal death of pack-objects
If our pack-objects sub-process dies of a signal, then it
likely didn't have a chance to write anything useful to
stderr. The user may be left scratching their head why the
push failed. Let's detect this situation and write something
to stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 7 Mar 2017 13:38:51 +0000 (08:38 -0500)]
send-pack: read "unpack" status even on pack-objects failure
If the local pack-objects of a push fails, we'll tell the
user about it. But one likely cause is that the remote
index-pack stopped reading for some reason (because it
didn't like our input, or encountered another error). In
that case we'd expect the remote to report more details to
us via the "unpack ..." status line. However, the current
code just hangs up completely, and the user never sees it.
Instead, let's call receive_unpack_status(), which will
complain on stderr with whatever reason the remote told us.
Note that if our pack-objects fails because the connection
was severed or the remote just crashed entirely, then our
packet_read_line() call may fail with "the remote end hung
up unexpectedly". That's OK. It's a more accurate
description than what we get now (which is just "some refs
failed to push").
This should be safe from any deadlocks. At the point we make
this call we'll have closed the writing end of the
connection to the server (either by handing it off to
a pack-objects which exited, explicitly in the stateless_rpc
case, or by doing a half-duplex shutdown for a socket). So
there should be no chance that the other side is waiting
for the rest of our pack-objects input.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 7 Mar 2017 13:37:36 +0000 (08:37 -0500)]
send-pack: improve unpack-status error messages
When the remote tells us that the "unpack" step failed, we
show an error message. However, unless you are familiar with
the internals of send-pack and receive-pack, it was not
clear that this represented an error on the remote side.
Let's re-word to make that more obvious.
Likewise, when we got an unexpected packet from the other
end, we complained with a vague message but did not actually
show the packet. Let's fix that.
And finally, neither message was marked for translation. The
message from the remote probably won't be translated, but
there's no reason we can't do better for the local half.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 7 Mar 2017 13:36:19 +0000 (08:36 -0500)]
send-pack: use skip_prefix for parsing unpack status
This avoids repeating ourselves, and the use of magic
numbers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 7 Mar 2017 13:35:57 +0000 (08:35 -0500)]
send-pack: extract parsing of "unpack" response
After sending the pack, we call receive_status() which gets
both the "unpack" line and the ref status. Let's break these
into two functions so we can call the first part
independently.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 7 Mar 2017 13:35:34 +0000 (08:35 -0500)]
receive-pack: fix deadlock when we cannot create tmpdir
The err_fd descriptor passed to the unpack() function is
intended to be handed off to the child index-pack, and our
async muxer will read until it gets EOF. However, if we
encounter an error before handing off the descriptor, we
must manually close(err_fd). Otherwise we will be waiting
for our muxer to finish, while the muxer is waiting for EOF
on err_fd.
We fixed an identical deadlock already in
49ecfa13f
(receive-pack: close sideband fd on early pack errors,
2013-04-19). But since then, the function grew a new
early-return in
722ff7f87 (receive-pack: quarantine objects
until pre-receive accepts, 2016-10-03), when we fail to
create a temporary directory. This return needs the same
treatment.
Reported-by: Horst Schirmeier <horst@schirmeier.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sun, 5 Mar 2017 11:46:38 +0000 (06:46 -0500)]
ewah: fix eword_t/uint64_t confusion
The ewah subsystem typedefs eword_t to be uint64_t, but some
code uses a bare uint64_t. This isn't a bug now, but it's a
potential maintenance problem if the definition of eword_t
ever changes. Let's use the correct type.
Note that we can't use COPY_ARRAY() here because the source
and destination point to objects of different sizes. For
that reason we'll also skip the usual "sizeof(*dst)" and use
the real type, which should make it more clear that there's
something tricky going on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Vegard Nossum [Sun, 5 Mar 2017 11:44:46 +0000 (06:44 -0500)]
line-log: use COPY_ARRAY to fix mis-sized memcpy
This memcpy meant to get the sizeof a "struct range", not a
"range_set", as the former is what our array holds. Rather
than swap out the types, let's convert this site to
COPY_ARRAY, which avoids the problem entirely (and confirms
that the src and dst types match).
Note for curiosity's sake that this bug doesn't trigger on
I32LP64 systems, but does on ILP32 systems. The mistaken
"struct range_set" has two ints and a pointer. That's 16
bytes on LP64, or 12 on ILP32. The correct "struct range"
type has two longs, which is also 16 on LP64, but only 8 on
ILP32.
Likewise an IL32P64 system would experience the bug.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Sun, 5 Mar 2017 18:25:19 +0000 (19:25 +0100)]
Travis: also test on 32-bit Linux
When Git v2.9.1 was released, it had a bug that showed only on Windows
and on 32-bit systems: our assumption that `unsigned long` can hold
64-bit values turned out to be wrong.
This could have been caught earlier if we had a Continuous Testing
set up that includes a build and test run on 32-bit Linux.
Let's do this (and take care of the Windows build later). This patch
asks Travis CI to install a Docker image with 32-bit libraries and then
goes on to build and test Git using this 32-bit setup.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Sat, 4 Mar 2017 01:50:16 +0000 (01:50 +0000)]
http: release strbuf on disabled alternates
This likely has no real-world impact on memory usage,
but it is cleaner for future readers.
Fixes:
abcbdc03895f ("http: respect protocol.*.allow=user for http-alternates")
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Sat, 4 Mar 2017 08:36:45 +0000 (08:36 +0000)]
http: inform about alternates-as-redirects behavior
It is disconcerting for users to not notice the behavior
change in handling alternates from commit
cb4d2d35c4622ec2
("http: treat http-alternates like redirects")
Give the user a hint about the config option so they can
see the URL and decide whether or not they want to enable
http.followRedirects in their config.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Devin J. Pohly [Thu, 23 Feb 2017 08:27:36 +0000 (02:27 -0600)]
p7000: add test for filter-branch with --prune-empty
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Devin J. Pohly [Thu, 23 Feb 2017 08:27:35 +0000 (02:27 -0600)]
filter-branch: fix --prune-empty on parentless commits
Previously, the git_commit_non_empty_tree function would always pass any
commit with no parents to git-commit-tree, regardless of whether the
tree was nonempty. The new commit would then be recorded in the
filter-branch revision map, and subsequent commits which leave the tree
untouched would be correctly filtered.
With this change, parentless commits with an empty tree are correctly
pruned, and an empty file is recorded in the revision map, signifying
that it was rewritten to "no commits." This works naturally with the
parent mapping for subsequent commits.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Devin J. Pohly [Thu, 23 Feb 2017 08:27:34 +0000 (02:27 -0600)]
t7003: ensure --prune-empty removes entire branch when applicable
Sanity check before changing the logic in git_commit_non_empty_tree.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Devin J. Pohly [Thu, 23 Feb 2017 08:27:33 +0000 (02:27 -0600)]
t7003: ensure --prune-empty can prune root commit
New test to expose a bug in filter-branch whereby the root commit is
never pruned, even though its tree is empty and --prune-empty is given.
The setup isn't exactly pretty, but I couldn't think of a simpler way to
create a parallel commit graph sans the first commit.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allan Xavier [Thu, 2 Mar 2017 17:29:02 +0000 (17:29 +0000)]
line-log.c: prevent crash during union of too many ranges
The existing implementation of range_set_union does not correctly
reallocate memory, leading to a heap overflow when it attempts to union
more than 24 separate line ranges.
For struct range_set *out to grow correctly it must have out->nr set to
the current size of the buffer when it is passed to range_set_grow.
However, the existing implementation of range_set_union only updates
out->nr at the end of the function, meaning that it is always zero
before this. This results in range_set_grow never growing the buffer, as
well as some of the union logic itself being incorrect as !out->nr is
always true.
The reason why 24 is the limit is that the first allocation of size 1
ends up allocating a buffer of size 24 (due to the call to alloc_nr in
ALLOC_GROW). This goes some way to explain why this hasn't been
caught before.
Fix the problem by correctly updating out->nr after reallocating the
range_set. As this results in out->nr containing the same value as the
variable o, replace o with out->nr as well.
Finally, add a new test to help prevent the problem reoccurring in the
future. Thanks to Vegard Nossum for writing the test.
Signed-off-by: Allan Xavier <allan.x.xavier@oracle.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sebastian Schuberth [Fri, 3 Mar 2017 10:57:46 +0000 (10:57 +0000)]
contrib: git-remote-{bzr,hg} placeholders don't need Python
It does not make sense for these placeholder scripts to depend on Python
just because the real scripts do. At the example of Git for Windows, we
would not even be able to see those warnings as it does not ship with
Python. So just use plain shell scripts instead.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 3 Mar 2017 07:36:33 +0000 (02:36 -0500)]
t/perf: add fallback for pre-bin-wrappers versions of git
It's tempting to say:
./run v1.0.0 HEAD
to see how we've sped up Git over the years. Unfortunately,
this doesn't quite work because versions of Git prior to
v1.7.0 lack bin-wrappers, so our "run" script doesn't
correctly put them in the PATH.
Worse, it means we silently find whatever other "git" is in
the PATH, and produce test results that have no bearing on
what we asked for.
Let's fallback to the main git directory when bin-wrappers
isn't present. Many modern perf scripts won't run with such
an antique version of Git, of course, but at least those
failures are detected and reported (and you're free to write
a limited perf script that works across many versions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 3 Mar 2017 07:14:03 +0000 (02:14 -0500)]
t/perf: use $MODERN_GIT for all repo-copying steps
Since
1a0962dee (t/perf: fix regression in testing older
versions of git, 2016-06-22), we point "$MODERN_GIT" to a
copy of git that matches the t/perf script itself, and which
can be used for tasks outside of the actual timings. This is
needed because the setup done by perf scripts keeps moving
forward in time, and may use features that the older
versions of git we are testing do not have.
That commit used $MODERN_GIT to fix a case where we relied
on the relatively recent --git-path option. But if you go
back further still, there are more problems.
Since
7501b5921 (perf: make the tests work in worktrees,
2016-05-13), we use "git -C", but versions of git older than
44e1e4d67 (git: run in a directory given with -C option,
2013-09-09) don't know about "-C". So testing an old version
of git with a new version of t/perf will fail the setup
step.
We can fix this by using $MODERN_GIT during the setup;
there's no need to use the antique version, since it doesn't
affect the timings. Likewise, we'll adjust the "init"
invocation; antique versions of git called this "init-db".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Thu, 2 Mar 2017 19:50:41 +0000 (11:50 -0800)]
t/perf: export variable used in other blocks
In p0001, a variable was created in a test_expect_success block to be
used in later test_perf blocks, but was not exported. This caused the
variable to not appear in those blocks (this can be verified by writing
'test -n "$commit"' in those blocks), resulting in a slightly different
invocation than what was intended. Export that variable.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt McCutchen [Wed, 22 Feb 2017 16:05:57 +0000 (11:05 -0500)]
fetch-pack: add specific error for fetching an unadvertised object
Enhance filter_refs (which decides whether a request for an unadvertised
object should be sent to the server) to record a new match status on the
"struct ref" when a request is not allowed, and have
report_unmatched_refs check for this status and print a special error
message, "Server does not allow request for unadvertised object".
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt McCutchen [Wed, 22 Feb 2017 16:02:15 +0000 (11:02 -0500)]
fetch_refs_via_pack: call report_unmatched_refs
"git fetch" currently doesn't bother to check that it got all refs it
sought, because the common case of requesting a nonexistent ref triggers
a die() in get_fetch_map. However, there's at least one case that
slipped through: "git fetch REMOTE SHA1" if the server doesn't allow
requests for unadvertised objects. Make fetch_refs_via_pack (which is
on the "git fetch" code path) call report_unmatched_refs so that we at
least get an error message in that case.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt McCutchen [Wed, 22 Feb 2017 16:01:22 +0000 (11:01 -0500)]
fetch-pack: move code to report unmatched refs to a function
Prepare to reuse this code in transport.c for "git fetch".
While we're here, internationalize the existing error message.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 2 Mar 2017 08:23:18 +0000 (03:23 -0500)]
checkout: restrict @-expansions when finding branch
When we parse "git checkout $NAME", we try to interpret
$NAME as a local branch-name. If it is, then we point HEAD
to that branch. Otherwise, we detach the HEAD at whatever
commit $NAME points to.
We do the interpretation by calling strbuf_branchname(), and
then blindly sticking "refs/heads/" on the front. This leads
to nonsense results when expansions like "@{upstream}" or
"@" point to something besides a local branch. We end up
with a local branch name like "refs/heads/origin/master" or
"refs/heads/HEAD".
Normally this has no user-visible effect because those
branches don't exist, and so we fallback to feeding the
result to get_sha1(), which resolves them correctly.
But as the new test in t3204 shows, there are corner cases
where the effect is observable, and we check out the wrong
local branch rather than detaching to the correct one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 2 Mar 2017 08:23:14 +0000 (03:23 -0500)]
strbuf_check_ref_format(): expand only local branches
This function asks strbuf_branchname() to expand any @-marks
in the branchname, and then we blindly stick refs/heads/ in
front of the result. This is obviously nonsense if the
expansion is "HEAD" or a ref in refs/remotes/.
The most obvious end-user effect is that creating or
renaming a branch with an expansion may have confusing
results (e.g., creating refs/heads/origin/master from
"@{upstream}" when the operation should be disallowed).
We can fix this by telling strbuf_branchname() that we are
only interested in local expansions. Any unexpanded bits are
then fed to check_ref_format(), which either disallows them
(in the case of "@{upstream}") or lets them through
("refs/heads/@" is technically valid, if a bit silly).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 2 Mar 2017 08:23:10 +0000 (03:23 -0500)]
branch: restrict @-expansions when deleting
We use strbuf_branchname() to expand the branch name from
the command line, so you can delete the branch given by
@{-1}, for example. However, we allow other nonsense like
"@", and we do not respect our "-r" flag (so we may end up
deleting an oddly-named local ref instead of a remote one).
We can fix this by passing the appropriate "allowed" flag to
strbuf_branchname().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 2 Mar 2017 08:23:06 +0000 (03:23 -0500)]
t3204: test git-branch @-expansion corner cases
git-branch feeds the branch names from the command line to
strbuf_branchname(), but we do not yet tell that function
which kinds of expansions should be allowed. Let's create a
set of tests that cover both the allowed and disallowed
cases.
That shows off some breakages where we currently create or
delete the wrong ref (and will make sure that we do not
break any cases that _should_ be working when we do add more
restrictions).
Note that we check branch creation and deletion, but do not
bother with renames. Those follow the same code path as
creation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 2 Mar 2017 08:23:01 +0000 (03:23 -0500)]
interpret_branch_name: allow callers to restrict expansions
The interpret_branch_name() function converts names like
@{-1} and @{upstream} into branch names. The expanded ref
names are not fully qualified, and may be outside of the
refs/heads/ namespace (e.g., "@" expands to "HEAD", and
"@{upstream}" is likely to be in "refs/remotes/").
This is OK for callers like dwim_ref() which are primarily
interested in resolving the resulting name, no matter where
it is. But callers like "git branch" treat the result as a
branch name in refs/heads/. When we expand to a ref outside
that namespace, the results are very confusing (e.g., "git
branch @" tries to create refs/heads/HEAD, which is
nonsense).
Callers can't know from the returned string how the
expansion happened (e.g., did the user really ask for a
branch named "HEAD", or did we do a bogus expansion?). One
fix would be to return some out-parameters describing the
types of expansion that occurred. This has the benefit that
the caller can generate precise error messages ("I
understood @{upstream} to mean origin/master, but that is a
remote tracking branch, so you cannot create it as a local
name").
However, out-parameters make the function interface somewhat
cumbersome. Instead, let's do the opposite: let the caller
tell us which elements to expand. That's easier to pass in,
and none of the callers give more precise error messages
than "@{upstream} isn't a valid branch name" anyway (which
should be sufficient).
The strbuf_branchname() function needs a similar parameter,
as most of the callers access interpret_branch_name()
through it.
We can break the callers down into two groups:
1. Callers that are happy with any kind of ref in the
result. We pass "0" here, so they continue to work
without restrictions. This includes merge_name(),
the reflog handling in add_pending_object_with_path(),
and substitute_branch_name(). This last is what powers
dwim_ref().
2. Callers that have funny corner cases (mostly in
git-branch and git-checkout). These need to make use of
the new parameter, but I've left them as "0" in this
patch, and will address them individually in follow-on
patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 2 Mar 2017 08:21:30 +0000 (03:21 -0500)]
strbuf_branchname: add docstring
This function and its companion, strbuf_check_branch_ref(),
did not have their purpose or semantics explained. Let's do
so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 2 Mar 2017 08:21:27 +0000 (03:21 -0500)]
strbuf_branchname: drop return value
The return value from strbuf_branchname() is confusing and
useless: it's 0 if the whole name was consumed by an @-mark,
but otherwise is the length of the original name we fed.
No callers actually look at the return value, so let's just
get rid of it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 2 Mar 2017 08:21:23 +0000 (03:21 -0500)]
interpret_branch_name: move docstring to header file
We generally put docstrings with function declarations,
because it's the callers who need to know how the function
works. Let's do so for interpret_branch_name().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>