[media] coda/imx-vdoa: constify structs

As warned by checkpatch:

WARNING: struct of_device_id should normally be const
#318: FILE: drivers/media/platform/coda/imx-vdoa.c:318:
+static struct of_device_id vdoa_dt_ids[] = {

So, constify structs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] coda: add i.MX6 VDOA driver

The i.MX6 Video Data Order Adapter's (VDOA) sole purpose is to convert
from a custom macroblock tiled format produced by the CODA960 decoder
into linear formats that can be used for scanout.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] dt-bindings: Add a binding for Video Data Order Adapter

Add a DT binding documentation for the Video Data Order Adapter (VDOA)
of the Freescale i.MX6 SoC.

Also, add the compatible property and correct clock to the device tree
to match the documentation.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pvrusb2-io: Add some spaces for better code readability

Use space characters at some source code places according to
the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pvrusb2-io: Use kmalloc_array() in pvr2_stream_buffer_count()

A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] davinci: VPIF: add basic support for DT init

Add basic support for initialization via DT

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] dt-bindings: add TI VPIF documentation

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] davinci: vpif_capture: fix start/stop streaming locking

Video capture subdevs may be over I2C and may sleep during xfer, so we
cannot do IRQ-disabled locking when calling the subdev.

The IRQ-disabled locking is meant to protect the DMA queue list
throughout the rest of the driver, so update the locking in
[start|stop]_streaming to protect just this list, and update the irqlock
comment to reflect what it actually protects.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] davinci: vpif_capture: remove hard-coded I2C adapter id

Remove hard-coded I2C adapter in favor of getting the
ID from platform_data.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] davinci: VPIF: fix module loading, init errors

Fix problems with automatic module loading by adding MODULE_ALIAS.  Also
fix various load-time errors cause by incorrect or not present
platform_data.

Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: fix dm1105.c build error

Fix dm1105 build error when CONFIG_I2C_ALGOBIT=m and
CONFIG_DVB_DM1105=y.

drivers/built-in.o: In function `dm1105_probe':
dm1105.c:(.text+0x2836e7): undefined reference to `i2c_bit_add_bus'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: stable@vger.kernel.org # applies to 4.0 (maybe even 3.x)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l: s5c73m3: fix negation operator

Bool values should be negated using logical operators. Using bitwise operators
results in unexpected and possibly incorrect results.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] Add maintainers for camera on N900

Mark me and Sakari as maintainers for Nokia N900 camera pieces.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l2-async: Use kmalloc_array() in v4l2_async_notifier_unregister()

A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: usb: cpia2: Use kmemdup instead of kmalloc and memcpy

When some other buffer is immediately copied into allocated region.
Replace calls to kmalloc followed by a memcpy with a direct
call to kmemdup.

Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pvrusb2: Clean up file handle in open() error path

Fix to avoid possible exit file handle in error paths.

Signed-off-by: Santosh Kumar Singh <kumar.san1093@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ivtv: Clean up file handle in open() error path

Fix to avoid possible exit file handle in error paths.

Signed-off-by: Santosh Kumar Singh <kumar.san1093@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] tm6000: Clean up file handle in open() error path

Fix to avoid possible memory leak and exit file handle
in error paths.

Signed-off-by: Santosh Kumar Singh <kumar.san1093@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] zoran: Clean up file handle in open() error path

Fix to avoid possible memory leak and exit file handle
in error paths.

Signed-off-by: Santosh Kumar Singh <kumar.san1093@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] vim2m: Clean up file handle in open() error path

Fix to avoid possible memory leak and exit file handle
in error paths.

Signed-off-by: Santosh Kumar Singh <kumar.san1093@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] solo6x10: use designated initializers

Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mtk-vcodec: use designated initializers

Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] bt8xx: fix memory leak

If dvb_attach() fails then we were just printing an error message and
exiting but the memory allocated to state was not released.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc: fix null dereference for tx-only devices

tx-only RC devices do not have a receive buffer.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc: LIRC_GET_MIN_TIMEOUT should be in range

LIRC_SET_REC_TIMEOUT can fail if the value returned by
LIRC_GET_MIN_TIMEOUT is set due to rounding errors.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: remove excessive spaces from error message

The current message has some wanted spaces on it:
rc_core: Loaded IR protocol module ir-jvc-decoder,                      but protocol jvc still not available

Merge it into a single line.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc: fix transmit-only read features

An RC device which is transmit-only shouldn't have the
LIRC_CAN_REC_MODE2 feature.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc/keymaps: add a keytable for the GeekBox remote control

The GeekBox ships with a 12 button remote control which seems to use the
NEC protocol. The button keycodes were captured with the "ir-keytable"
tool (ir-keytable -p $PROTOCOL -t; human_button_pusher).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] Documentation: devicetree: Add document bindings for mtk-cir

This patch adds documentation for devicetree bindings for
consumer Mediatek IR controller.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] Documentation: devicetree: move shared property used by rc into a common place

Most IR drivers uses the same label to identify the
scancode/key table they used by multiple bindings and lack
explanation well. So move the shared property into a common
place and give better explanation.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: add driver for IR remote receiver on MT7623 SoC

This patch adds driver for IR controller on MT7623 SoC.
and should also work on similar Mediatek SoC. Currently
testing successfully on NEC and SONY remote controller
only but it should work on others (lirc, rc-5 and rc-6).

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rx51: broken build

As reported by kernel build test:

   In file included from arch/arm/mach-omap2/pdata-quirks.c:15:0:
>> arch/arm/mach-omap2/pdata-quirks.c:536:49: error: 'rx51_lirc_data' undeclared here (not in a function)
     OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data),
                                                    ^
   include/linux/of_platform.h:52:21: note: in definition of macro 'OF_DEV_AUXDATA'
       .platform_data = _pdata }
                        ^~~~~~

Since "a92def1 [media] ir-rx51: port to rc-core" the build fails on
some arm configurations.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] staging/media/s5p-cec/exynos_hdmi_cecctrl.c Fixed blank line before closing brace '}'

Fixed checkpatch check blank line before closing brace '}'

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] staging/s5p-cec: fixed alignment should match open parenthesis

Fixed Checkpatch check "Alignment should match open parenthesis"

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] adv7170: drop redundant ret local

Simplifies return value logic of adv7170_set_fmt().

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ov2659: remove NOP assignment

The loop over the ov2659_formats[] array just a few lines above
verifies that mf->code matches the selected array entry.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] gp8psk: fix spelling mistake: "firmare" -> "firmware"

trivial fix to spelling mistake in err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] b2c2: fix spelling mistake: "Contunuity" -> "Continuity"

trivial fix to spelling mistake in deb_chk message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cobalt: fix spelling mistake: "Celcius" -> "Celsius"

trivial fix to spelling mistake in cobalt_info message. Anders Celsius
was the Swedish astronomer.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] dvb-frontends: fix spelling mistake on cx24123_pll_calcutate

trivial fix to spelling mistake of function name in err message,
should be cx24123_pll_calculate instead of cx24123_pll_calcutate.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] am437x-vpfe: always assign bpp variable

In vpfe_s_fmt(), when the sensor format and the requested format were
the same, bpp was assigned to vpfe->bpp without being initialized first.

Grab the bpp value that is currently used by using __vpfe_get_format()
instead of its wrapper, vpfe_try_fmt().

This use of uninitialized variable has been found by compiling the
kernel with clang.

Fixes: 417d2e507edc ("[media] media: platform: add VPFE capture driver
support for AM437X")

Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] gen-errors.rst: document EIO

Document the EIO error since this can happen anywhere anytime and applications
should be aware of this.

Also fix typo: exaustive -> exhaustive

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] vivid: Enable 4k resolution for webcam capture device

Add 3840x2160 as valid resolution for the webcam capture input and
adjust the webcam intervals accordingly.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: s5p-cec: Remove references to non-existent PLAT_S5P symbol

Commit d78c16ccde96 ("ARM: SAMSUNG: Remove remaining legacy code")
removed the Kconfig symbol PLAT_S5P.
This patch remove the last occurrence of this symbol.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: s5p-cec: Remove unneeded linux/miscdevice.h include

s5p-cec: does not use any miscdevice so this patch remove this
unnecessary inclusion.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] adv7604: Initialize drive strength to default when using DT

The adv7604 driver platform data contains fields for configuring the drive
strength of the output pins. When probing the driver through DT these
fields are not explicitly initialized, which means they are left at 0. This
is a reserved setting for the drive strength configuration though and can
cause signal integrity issues.

Whether these signal integrity issues are visible depends on the PCB
specifics (e.g. the higher the load capacitance for the output the more
visible the issue). But it has been observed on existing solutions at high
pixel clock rates.

Initialize the drive strength settings to the power-on-reset value of the
device when probing through devicetree to avoid this issue.

Fixes: 0e158be0162b ("adv7604: Add DT support")

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: platform: soc_camera_platform : constify v4l2_subdev_* structures

v4l2_subdev_{core/video}_ops structures are stored in the
fields of the v4l2_subdev_ops structure which are of type const.
Also, v4l2_subdev_ops structure is passed to a function
having its argument of type const. As these structures are never
modified, so declare them as const.
Done using Coccinelle:(One of the scripts)

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct v4l2_subdev_core_ops i@p = {...};

@ok1@
identifier r1.i;
position p;
struct v4l2_subdev_ops obj;
@@
obj.core=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct v4l2_subdev_core_ops i;

File size before:
    text   data     bss     dec     hex filename
    858     576       0    1434     59a soc_camera/soc_camera_platform.o

File size after:
  text    data     bss     dec     hex filename
   1234     192       0    1426     592 soc_camera/soc_camera_platform.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] soc-camera: Fix a return value in case of error

If 'ov9640_reg_read()' does not return 0, then 'val' is left unmodified.
As it is not initialized either, the return value can be anything.

It is likely that returning the error code was expected here.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] staging: lirc_imon: port remaining usb ids to imon and remove

The staging lirc_imon driver contains 4 usb ids. Two of those have a VFD
and two don't. The VFD code is exactly the same in the mainline imon
driver, so that part is easily ported.

The staging driver produces raw IR rather than scancodes for the four
devices, so I've ported the raw IR code from staging to mainline imon.

Now that mainline imon can handle these four devices, lirc_imon is no
longer needed.

Compile tested only.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Venky Raju <dev@venky.ws>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] staging: lirc_bt829: remove

This driver is for an old mach64 VT board, which also has a framebuffer
driver (atyfb) and userspace mach64 X driver.

It was merged in 2010 and noone has attempted to port it to rc-core,
which would be necessary to get it out of staging.

I have not been able to track down the hardware either.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Leonid Froenchenko <lfroen@galileo.co.il>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] staging: lirc_parallel: remove

The lirc_parallel driver was merged in 2010 and noone has attempted
to do the work necessary to get it out of staging (i.e. port it to
rc-core). I have not been able to find one of these devices, and
a machine with a parallel port is pretty rare too.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Christoph Bartelmus <lirc@bartelmus.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] staging: lirc_sir: port to rc-core

Before this driver can be moved out of staging, it should be ported
to rc-core. I've tried to make the minimum changes possible without
upsetting checkpatch.

Compile tested only.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Christoph Bartelmus <lirc@bartelmus.de>
Cc: Milan Pikula <www@fornax.sk>
Cc: Frank Przybylski <mail@frankprzybylski.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ir-rx51: port to rc-core

This driver was written using lirc since rc-core did not support
transmitter-only hardware at that time. Now that it does, port
this driver.

Compile tested only.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: add support for IR LEDs driven through SPI

The ir-spi is a simple device driver which supports the
connection between an IR LED and the MOSI line of an SPI device.

The driver, indeed, uses the SPI framework to stream the raw data
provided by userspace through an rc character device. The chardev
is handled by the LIRC framework and its functionality basically
provides:

 - write: the driver gets a pulse/space signal and translates it
   to a binary signal that will be streamed to the IR led through
   the SPI framework.
 - set frequency: sets the frequency whith which the data should
   be sent. This is handle with ioctl with the
   LIRC_SET_SEND_CARRIER flag (as per lirc documentation)
 - set duty cycle: this is also handled with ioctl with the
   LIRC_SET_SEND_DUTY_CYCLE flag. The driver handles duty cycles
   of 50%, 60%, 70%, 75%, 80% and 90%, calculated on 16bit data.

The character device is created under /dev/lircX name, where X is
and ID assigned by the LIRC framework.

Example of usage:

        fd = open("/dev/lirc0", O_RDWR);
        if (fd < 0)
                return -1;

        val = 608000;
        ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val);
        if (ret < 0)
                return -1;

val = 60;
        ret = ioctl(fd, LIRC_SET_SEND_DUTY_CYCLE, &val);
        if (ret < 0)
                return -1;

        n = write(fd, buffer, BUF_LEN);
        if (n < 0 || n != BUF_LEN)
                ret = -1;

        close(fd);

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] Documentation: bindings: add documentation for ir-spi device driver

Document the ir-spi driver's binding which is a IR led driven
through the SPI line.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc-ir-raw: do not generate any receiving thread for raw transmitters

Raw IR transmitters do not need any thread listening for
occurring events. Check the driver type before running the
thread.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc-core: add support for IR raw transmitters

IR raw transmitter driver type is specified in the enum
rc_driver_type as RC_DRIVER_IR_RAW_TX which includes all those
devices that transmit raw stream of bit to a receiver.

The data are provided by userspace applications, therefore they
don't need any input device allocation, but still they need to be
registered as raw devices.

Suggested-by: Sean Young <sean@mess.org>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc-main: split setup and unregister functions

Move the input device allocation, map and protocol handling to
different functions.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc-main: assign driver type during allocation

The driver type can be assigned immediately when an RC device
requests to the framework to allocate the device.

This is an 'enum rc_driver_type' data type and specifies whether
the device is a raw receiver or scancode receiver. The type will
be given as parameter to the rc_allocate_device device.

Change accordingly all the drivers calling rc_allocate_device()
so that the device type is specified during the rc device
allocation. Whenever the device type is not specified, it will be
set as RC_DRIVER_SCANCODE which was the default '0' value.

Suggested-by: Sean Young <sean@mess.org>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: nuvoton-cir: Add support wakeup via sysfs filter callback

Nuvoton-cir utilizes the encoding capabilities of rc-core to convert
scancodes from user space to pulse/space format understood by the
underlying hardware.

Converted samples are then written to the wakeup fifo along with other
necessary configuration to enable wake up functionality.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: rc-loopback: Add loopback of filter scancodes

Add the s_wakeup_filter callback to the rc-loopback driver, which instead
of setting the filter just feeds the scancode back through the input
device so that it can be verified.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: rc-core: Add support for encode_wakeup drivers

Add support in rc-core for drivers which implement the wakeup scancode
filter by encoding the scancode using the raw IR encoders. This is by
way of rc_dev::encode_wakeup which should be set to true and
rc_dev::allowed_wakeup_protocols should be set to the raw IR encoders.

We also do not permit the mask to be set as we cannot generate IR
which would match that.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: ir-sony-decoder: Add encode capability

Add the capability to encode Sony scancodes as raw events. Sony uses
pulse length rather than pulse distance.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: ir-sharp-decoder: Add encode capability

Add the capability to encode Sharp scancodes as raw events.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: ir-sanyo-decoder: Add encode capability

Add the capability to encode Sanyo scancodes as raw events.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: ir-jvc-decoder: Add encode capability

Add the capability to encode JVC scancodes as raw events.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: ir-nec-decoder: Add encode capability

Add the capability to encode NEC scancodes as raw events. The
scancode_to_raw is pretty much taken from the img-ir NEC filter()
callback, and modulation uses the pulse distance helper added in a
previous commit.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: ir-rc6-decoder: Add encode capability

Add the capability to encode RC-6 and RC-6A scancodes as raw events.

The Manchester modulation helper is used several times with various
timings so that RC-6 header preamble, the header, header trailing bit
and the data itself can be modulated correctly.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: James Hogan <james@albanarts.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: ir-rc5-decoder: Add encode capability

Add the capability to encode RC-5, RC-5X and RC-5-SZ scancodes as raw
events.

The Manchester modulation helper is used, and for RC-5X it is used twice
with two sets of timings, the first with a short trailer space for the
space in the middle, and the second with no leader so that it can
continue the space.

The encoding in RC-5-SZ first inserts a pulse and then simply utilizes
the generic Manchester encoder available in rc-core.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: rc-ir-raw: Add pulse-distance modulation helper

Add IR encoding helper for pulse-distance modulation as used by the NEC
protocol.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper

Adding a simple Manchester encoder to rc-core.
Manchester coding is used by at least RC-5 and RC-6 protocols and their
variants.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: rc-ir-raw: Add scancode encoder callback

Add a callback to raw ir handlers for encoding and modulating a scancode
to a set of raw events. This could be used for transmit, or for
converting a wakeup scancode to a form that is more suitable for raw
hardware wake up filters.

Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: raw IR drivers cannot handle cec, unknown or other

unknown and other are for IR protocols for which we have no decoder,
so the raw IR drivers have no chance of generating them. cec is not
an IR protocol.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] winbond-cir: use sysfs wakeup filter

Now that we can select the exact variant of the protocol for wakeup
filter, the winbond-cir can use the wakeup filter rather than module
parameters.

Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: unify nec32 protocol scancode format

There are two different encodings used for nec32:
 - The ir-nec-decoder.c decoder treats it as 32 bit msb first.
 - The img-ir decoder/encoder, winbond wakeup, dib0700, ir-ctl userspace,
   treat nec32 analogous to necx and nec: 4 bytes, each lsb first. So this
   format reverses the 4 bytes.

There are arguments to be had for both formats, but we should not use
different formats in different parts of the kernel. Selecting the second
format introduces the least code churn. It does mean that the TiVo keymap
needs updating.

This change was submitted before as "18bc174 [media] media: rc: change
32bit NEC scancode format", which was reverted because it was unclear
what scancode rc drivers produce. There are now more examples of drivers
which produce nec32 in lsb format.

The TiVo keymap is verified against the Nero Liquid TiVo remote. The
keymap is not for the Tivo DVR remote, which uses rc-5.

Signed-off-by: Sean Young <sean@mess.org>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: Add scancode validation

We need to valdiate that scancodes are valid for their protocol; an
incorrect necx scancode could actually be a nec scancode, for example.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: change wakeup_protocols to list all protocol variants

For IR wakeup, a driver has to program the hardware to wakeup at a
specific IR sequence, so it makes no sense to allow multiple wakeup
protocols to be selected. In the same manner the sysfs interface only
allows one scancode to be provided.

In addition, we need to know the specific variant of the protocol.

In short, these changes are made to the wakeup_protocols sysfs entry:
 - list all the protocol variants rather than the protocol groups,
   e.g. "nec nec-x nec-32" rather than just "nec".
 - only allow one protocol variant to be selected rather than multiple
 - wakeup_filter can only be set once a protocol has been selected in
   wakeup_protocols.

This is an API change, however the only user of this API is the img-ir,
but the wakeup code was never merged to mainline, so it was never used.

Signed-off-by: Sean Young <sean@mess.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Sifan Naeem <sifan.naeem@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc5x: document that this is the 20 bit variant

There are many variants of extended rc5. This implements the 20 bit
version.

Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc5x: 6th command bit is S2 bit

The 2nd stop bit in rc5 is reused as an inverted 6th command bit in
20 bits rc5x. Currently the rc5x decoder sets the 6th command bit as
an inverted duplicate of the lowest system bit; as a result we do
not have all the command bits.

Note that there are no rc5x keymaps present.

Signed-off-by: Sean Young <sean@mess.org>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: allow software timeout to be set

Both the iguanair and the technotrend usb ir do not do any timeout
handling in hardware, so timeout is entirely done in
ir_raw_event_store_with_filter(). Any sensible timeout value will
do, so allow it to be set using LIRC_SET_REC_TIMEOUT.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] serial_ir: generate timeout

No timeout is generated by serial_ir since the port only generates
interrupts on edges. Some IR protocols like rc6 and rc5 need a trailing
space or timeout so they know there are no more bits coming.

Without it, the current key will only be reported once some more IR
occurs.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] em28xx: IR protocol not reported correctly

Report the correct NEC variant.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc: LIRC_{G,S}ET_SEND_MODE fail if device cannot transmit

These ioctls should not succeed if the device cannot send. Also make it
clear that these ioctls should return the lirc mode, although the actual
value does not change.

Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] lirc_dev: LIRC_{G,S}ET_REC_MODE do not work

Since "273b902 [media] lirc_dev: use LIRC_CAN_REC() define" these
ioctls no longer work.

Signed-off-by: Sean Young <sean@mess.org>
Cc: <stable@vger.kernel.org> # v4.8+
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mceusb: LIRC_SET_SEND_CARRIER returns 0 on success

LIRC_SET_SEND_CARRIER ioctl should not return the carrier used, it
should return 0.

Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cxusb: port to rc-core

The d680_dmb keymap has some new new mappings.

Tested-by: Vincent McIntyre <vincent.mcintyre@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc: refactor raw handler kthread

I think we can get rid of the spinlock protecting the kthread from being
interrupted by a wakeup in certain parts.
Even with the current implementation of the kthread the only lost wakeup
scenario could happen if the wakeup occurs between the kfifo_len check
and setting the state to TASK_INTERRUPTIBLE.

In the changed version we could lose a wakeup if it occurs between
processing the fifo content and setting the state to TASK_INTERRUPTIBLE.
This scenario is covered by an additional check for available events in
the fifo and setting the state to TASK_RUNNING in this case.

In addition the changed version flushes the kfifo before ending
when the kthread is stopped.

With this patch we gain:
- Get rid of the spinlock
- Simplify code
- Don't grep / release the mutex for each individual event but just once
  for the complete fifo content. This reduces overhead if a driver e.g.
  triggers processing after writing the content of a hw fifo to the kfifo.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] davinci: Use a local media device pointer instead

The function has a local variable that points to the media device; use
that instead of finding the media device under the entity.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] xilinx: Use a local media device pointer instead

The function has a local variable that points to the media device; use
that instead of finding the media device under the entity.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] omap3isp: Use a local media device pointer instead

The function has a local variable that points to the media device; use
that instead of finding the media device under the entity.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: entity: Add debug information to graph walk

Use dev_dbg() to tell about the progress of the graph traversal algorithm.
This is intended to make debugging of the algorithm easier.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: Use single quotes to quote entity names

Instead of double quotes, use single quotes to quote entity names. Using
single quotes is consistent with the English language and is also in line
with the practices across the kernel.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: entity: Split graph walk iteration into two functions

With media_entity_graph_walk_next() getting more and more complicated (and
especially so with has_routing() support added), split the function into
two.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: Rename graph and pipeline structs and functions

The media_entity_pipeline_start() and media_entity_pipeline_stop()
functions are renamed as media_pipeline_start() and media_pipeline_stop(),
respectively. The reason is two-fold: the pipeline struct is, rightly,
already called media_pipeline (rather than media_entity_pipeline) and what
this really is about is a pipeline. A pipeline consists of entities ---
and, well, other objects embedded in these entities.

As the pipeline object will be in the future moved from entities to pads
in order to support multiple pipelines through a single entity, do the
renaming now.

Similarly, functions operating on struct media_entity_graph as well as the
struct itself are renamed by dropping the "entity_" part from the prefix
of the function family and the data structure. The graph traversal which
is what the functions are about is not specifically about entities only
and will operate on pads for the same reason as the media pipeline.

The patch has been generated using the following command:

git grep -l media_entity |xargs perl -i -pe '
s/media_entity_pipeline/media_pipeline/g;
s/media_entity_graph/media_graph/g'

And a few manual edits related to line start alignment and line wrapping.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: entity: Be vocal about failing sanity checks

Commit 3801bc7d1b8d ("[media] media: Media Controller fix to not let
stream_count go negative") added a sanity check for negative stream_count,
but a failure of the check remained silent. Make sure the failure is
noticed.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: entity: Fix stream count check

There's a sanity check for the stream count remaining positive or zero on
error path, but instead of performing the check on the traversed entity it
is performed on the entity where traversal ends. Fix this.

Fixes: commit 3801bc7d1b8d ("[media] media: Media Controller fix to not let stream_count go negative")

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: Drop FSF's postal address from the source code files

Drop the FSF's postal address from the source code files that typically
contain mostly the license text. Of the 628 removed instances, 578 are
outdated.

The patch has been created with the following command without manual edits:

git grep -l "675 Mass Ave\|59 Temple Place\|51 Franklin St" -- \
drivers/media/ include/media|while read i; do i=$i perl -e '
open(F,"< $ENV{i}");
$a=join("", <F>);
$a =~ s/[ \t]*\*\n.*You should.*\n.*along with.*\n.*(\n.*USA.*$)?\n//m
&& $a =~ s/(^.*)Or, (point your browser to) /$1To obtain the license, $2\n$1/m;
close(F);
open(F, "> $ENV{i}");
print F $a;
close(F);'; done

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

[media] media: Properly pass through media entity types in entity enumeration

When the functions replaced media entity types, the range which was
allowed for the types was incorrect. This meant that media entity types
for specific devices were not passed correctly to the userspace through
MEDIA_IOC_ENUM_ENTITIES. Fix it.

Fixes: commit b2cd27448b33 ("[media] media-device: map new functions into old types for legacy API")
Reported-and-tested-by: Antti Laakso <antti.laakso@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org # For v4.5 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mn88473: add DVB-T2 PLP support

Adds PLP ID filtering for DVB-T2.

It is untested as I don't have any signal having PLP ID other than 0.
There is only 2 extra registers, 0x32 and 0x36 on bank2, that are
programmed for DVB-T2 but not for DVB-T and all the rest are
programmed similarly - so it is likely PLP.

Pridvorov reported successfully testing it in Russia with m-PLP streams,
on both Vladivostok and Moskow.

Tested-by: "Придворов Андрей (Pridvorov Andrey)" <ua0lnj@bk.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Merge tag 'v4.10-rc1' into patchwork

Linux 4.10-rc1

* tag 'v4.10-rc1': (11427 commits)
  Linux 4.10-rc1
  powerpc: Fix build warning on 32-bit PPC
  avoid spurious "may be used uninitialized" warning
  mm: add PageWaiters indicating tasks are waiting for a page bit
  mm: Use owner_priv bit for PageSwapCache, valid when PageSwapBacked
  ktime: Get rid of ktime_equal()
  ktime: Cleanup ktime_set() usage
  ktime: Get rid of the union
  clocksource: Use a plain u64 instead of cycle_t
  irqchip/armada-xp: Consolidate hotplug state space
  irqchip/gic: Consolidate hotplug state space
  coresight/etm3/4x: Consolidate hotplug state space
  cpu/hotplug: Cleanup state names
  cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions
  staging/lustre/libcfs: Convert to hotplug state machine
  scsi/bnx2i: Convert to hotplug state machine
  scsi/bnx2fc: Convert to hotplug state machine
  cpu/hotplug: Prevent overwriting of callbacks
  x86/msr: Remove bogus cleanup from the error path
  bus: arm-ccn: Prevent hotplug callback leak
  ...