OSDN Git Service
Ingo Molnar [Wed, 20 Dec 2006 10:53:32 +0000 (11:53 +0100)]
[PATCH] x86_64: fix boot time hang in detect_calgary()
if CONFIG_CALGARY_IOMMU is built into the kernel via
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT, or is enabled via the
iommu=calgary boot option, then the detect_calgary() function runs to
detect the presence of a Calgary IOMMU.
detect_calgary() first searches the BIOS EBDA area for a "rio_table_hdr"
BIOS table. It has this parsing algorithm for the EBDA:
while (offset) {
...
/* The next offset is stored in the 1st word. 0 means no more */
offset = *((unsigned short *)(ptr + offset));
}
got that? Lets repeat it slowly: we've got a BIOS-supplied data
structure, plus Linux kernel code that will only break out of an
infinite parsing loop once the BIOS gives a zero offset. Ok?
Translation: what an excellent opportunity for BIOS writers to lock up
the Linux boot process in an utterly hard to debug place! Indeed the
BIOS jumped on that opportunity on my box, which has the following EBDA
chaining layout:
384, 65282, 65535, 65535, 65535, 65535, 65535, 65535 ...
see the pattern? So my, definitely non-Calgary system happily locks up
in detect_calgary()!
the patch below fixes the boot hang by trusting the BIOS-supplied data
structure a bit less: the parser always has to make forward progress,
and if it doesnt, we break out of the loop and i get the expected kernel
message:
Calgary: Unable to locate Rio Grande Table in EBDA - bailing!
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ingo Molnar [Wed, 20 Dec 2006 10:28:46 +0000 (11:28 +0100)]
[PATCH] x86_64: fix boot hang caused by CALGARY_IOMMU_ENABLED_BY_DEFAULT
one of my boxes didnt boot the 2.6.20-rc1-rt0 kernel rpm, it hung during
early bootup. After an hour or two of happy debugging i narrowed it down
to the CALGARY_IOMMU_ENABLED_BY_DEFAULT option, which was freshly added
to 2.6.20 via the x86_64 tree and /enabled by default/.
commit
bff6547bb6a4e82c399d74e7fba78b12d2f162ed claims:
[PATCH] Calgary: allow compiling Calgary in but not using it by default
This patch makes it possible to compile Calgary in but not use it by
default. In this mode, use 'iommu=calgary' to activate it.
but the change does not actually practice it:
config CALGARY_IOMMU_ENABLED_BY_DEFAULT
bool "Should Calgary be enabled by default?"
default y
depends on CALGARY_IOMMU
help
Should Calgary be enabled by default? if you choose 'y', Calgary
will be used (if it exists). If you choose 'n', Calgary will not be
used even if it exists. If you choose 'n' and would like to use
Calgary anyway, pass 'iommu=calgary' on the kernel command line.
If unsure, say Y.
it's both 'default y', and says "If unsure, say Y". Clearly not a typo.
disabling this option makes my box boot again. The patch below fixes the
Kconfig entry. Grumble.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Geert Uytterhoeven [Wed, 20 Dec 2006 14:59:48 +0000 (15:59 +0100)]
[PATCH] __set_irq_handler bogus space
__set_irq_handler: Kill a bogus space
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Thu, 21 Dec 2006 08:03:38 +0000 (00:03 -0800)]
Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block:
[PATCH] block: document io scheduler allow_merge_fn hook
[PATCH] cfq-iosched: don't allow sync merges across queues
[PATCH] Fixup blk_rq_unmap_user() API
[PATCH] __blk_rq_unmap_user() fails to return error
[PATCH] __blk_rq_map_user() doesn't need to grab the queue_lock
[PATCH] Remove queue merging hooks
[PATCH] ->nr_sectors and ->hard_nr_sectors are not used for BLOCK_PC requests
[PATCH] cciss: fix XFER_READ/XFER_WRITE in do_cciss_request
[PATCH] cciss: set default raid level when reading geometry fails
Linus Torvalds [Thu, 21 Dec 2006 08:02:35 +0000 (00:02 -0800)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
[libata] sata_svw, sata_vsc: kill iomem warnings
[PATCH] libata: take scmd->cmd_len into account when translating SCSI commands
[PATCH] libata: kill @cdb argument from xlat methods
[PATCH] libata: clean up variable name usage in xlat related functions
[libata] Move some PCI IDs from sata_nv to ahci
[libata] pata_via: suspend/resume support fix
[libata] pata_cs5530: suspend/resume support tweak
Linus Torvalds [Thu, 21 Dec 2006 08:02:03 +0000 (00:02 -0800)]
Merge /pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
Driver core: proper prototype for drivers/base/init.c:driver_init()
kobject: kobject_uevent() returns manageable value
kref refcnt and false positives
Linus Torvalds [Thu, 21 Dec 2006 08:01:47 +0000 (00:01 -0800)]
Merge /pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (22 commits)
acpiphp: Link-time error for PCI Hotplug
shpchp: cleanup shpchp.h
shpchp: remove shpchprm_get_physical_slot_number
shpchp: cleanup struct controller
shpchp: remove unnecessary struct php_ctlr
PCI: ATI sb600 sata quirk
PCI legacy resource fix
PCI: don't export device IDs to userspace
PCI: Be a bit defensive in quirk_nvidia_ck804() so we don't risk dereferencing a NULL pdev.
PCI: Fix multiple problems with VIA hardware
PCI: Only check the HT capability bits in mpic.c
PCI: Use pci_find_ht_capability() in drivers/pci/quirks.c
PCI: Add #defines for Hypertransport MSI fields
PCI: Use pci_find_ht_capability() in drivers/pci/htirq.c
PCI: Add pci_find_ht_capability() for finding Hypertransport capabilities
PCI: Create __pci_bus_find_cap_start() from __pci_bus_find_cap()
pci: Introduce pci_find_present
PCI: pcieport-driver: remove invalid warning message
rpaphp: compiler warning cleanup
PCI quirks: remove redundant check
...
Linus Torvalds [Thu, 21 Dec 2006 08:01:06 +0000 (00:01 -0800)]
Merge /pub/scm/linux/kernel/git/gregkh/usb-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (34 commits)
USB Storage: remove duplicate Nokia entry in unusual_devs.h
[PATCH] bluetooth: add support for another Kensington dongle
[PATCH] usb serial: add support for Novatel S720/U720 CDMA/EV-DO modems
[PATCH] USB: Nokia E70 is an unusual device
USB: fix to usbfs_snoop logging of user defined control urbs
USB: at91_udc: Additional checks
USB: at91_udc: Cleanup variables after failure in usb_gadget_register_driver()
USB: at91_udc: allow drivers that support high speed
USB: u132-hcd/ftdi-elan: add support for Option GT 3G Quad card
USB: at91_udc, misc fixes
USB: at91 udc, support at91sam926x addresses
USB: OHCI support for PNX8550
USB: ohci handles hardware faults during root port resets
USB: ohci at91 warning fix
USB: ohci whitespace/comment fixups
USB: MAINTAINERS update, EHCI and OHCI
USB: gadget driver unbind() is optional; section fixes; misc
UHCI: module parameter to ignore overcurrent changes
USB: Nokia E70 is an unusual device
USB AUERSWALD: replace kmalloc+memset with kzalloc
...
Linus Torvalds [Thu, 21 Dec 2006 07:59:36 +0000 (23:59 -0800)]
Merge branch 'merge' of /linux/kernel/git/paulus/powerpc
* 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc:
[POWERPC] Fix register save area alignment for swapcontext syscall
[POWERPC] Fix PCI device channel state initialization
[POWERPC] Update MTD OF documentation
[POWERPC] Probe Efika platform before CHRP.
[POWERPC] Fix build of cell zImage.initrd
[POWERPC] iSeries: fix CONFIG_VIOPATH dependency
[POWERPC] iSeries: fix viocons init
[POWERPC] iSeries: fix viocd init
[POWERPC] iSeries: fix iseries_veth init
[POWERPC] iSeries: fix viotape init
[POWERPC] iSeries: fix viodasd init
[POWERPC] Workaround oldworld OF bug with IRQs & P2P bridges
[POWERPC] powerpc: add scanning of ebc bus to of_platform
[POWERPC] spufs: fix assignment of node numbers
[POWERPC] cell: Fix spufs with "new style" device-tree
[POWERPC] cell: Enable spider workarounds on all PCI buses
[POWERPC] cell: add forward struct declarations to spu.h
[POWERPC] cell: update cell_defconfig
Linus Torvalds [Thu, 21 Dec 2006 07:59:07 +0000 (23:59 -0800)]
Merge branch 'drm-patches' of /linux/kernel/git/airlied/drm-2.6
* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm: Stop defining pci_pretty_name
drm: r128: comment aligment with drm git
drm: make kernel context switch same as for drm git tree.
drm: fixup comment header style
drm: savage: compat fix from drm git.
drm: Unify radeon offset checking.
i915_vblank_tasklet: Try harder to avoid tearing.
DRM: handle pci_enable_device failure
drm: fix return value check
Linus Torvalds [Thu, 21 Dec 2006 07:56:06 +0000 (23:56 -0800)]
Merge branch 'linus' of /linux/kernel/git/perex/alsa
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (30 commits)
[ALSA] version 1.0.14rc1
[ALSA] ac97: Identify CMI9761 chips.
[ALSA] ac97_codec - trivial fix for bit update functions
[ALSA] snd-ca0106: Fix typos.
[ALSA] snd-ca0106: Add new card variant.
[ALSA] sound: fix PCM substream list
[ALSA] sound: initialize rawmidi substream list
[ALSA] snd_hda_intel 3stack mode for ASUS P5P-L2
[ALSA] Remove IRQF_DISABLED for shared PCI irqs
[ALSA] Fix invalid assignment of PCI revision
[ALSA] Fix races in PCM OSS emulation
[ALSA] hda-codec - fix typo in PCI IDs
[ALSA] ac97 - Fix potential negative array index
[ALSA] hda-codec - Verbose proc output for PCM parameters
[ALSA] hda-codec - Fix detection of supported sample rates
[ALSA] hda-codec - Fix model for ASUS V1j laptop
[ALSA] sound/core/control.c: remove dead code
[ALSA] hda-codec - Add model for HP q965
[ALSA] pcm core: fix silence_start calculations
[ALSA] hda-codec - Fix a typo
...
Linus Torvalds [Thu, 21 Dec 2006 07:54:23 +0000 (23:54 -0800)]
Merge branch 'for-linus' of /home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (29 commits)
[ARM] 4062/1: S3C24XX: Anubis and Osiris shuld have CONFIG_PM_SIMTEC
[ARM] 4060/1: update several ARM defconfigs
[ARM] 4061/1: xsc3: change of maintainer
[ARM] 4059/1: VR1000: fix LED3's platform device number
[ARM] 4022/1: iop13xx: generic irq fixups
[ARM] 4015/1: s3c2410 cpu ifdefs
[ARM] 4057/1: ixp23xx: unconditionally enable hardware coherency
[ARM] 4056/1: iop13xx: fix resource.end off-by-one in flash setup
[ARM] 4055/1: iop13xx: fix phys_io/io_pg_offst for iq81340mc/sc
[ARM] 4054/1: ep93xx: add HWCAP_CRUNCH
[ARM] 4052/1: S3C24XX: Fix PM in arch/arm/mach-s3c2410/Kconfig
[ARM] Fix warnings from asm/system.h
[ARM] 4051/1: S3C24XX: clean includes in S3C2440 and S3C2442 support
[ARM] 4050/1: S3C24XX: remove old changelogs in arch/arm/mach-s3c2410
[ARM] 4049/1: S3C24XX: fix sparse warning due to upf_t in regs-serial.h
[ARM] 4048/1: S3C24XX: make s3c2410_pm_resume() static
[ARM] 4046/1: S3C24XX: fix sparse errors arch/arm/mach-s3c2410
[ARM] 4045/1: S3C24XX: remove old VA for non-shared areas
[ARM] 4044/1: S3C24XX: fix sparse warnings in arch/arm/mach-s3c2410/s3c2442-clock.c
[ARM] 4043/1: S3C24XX: fix sparse warnings in arch/arm/mach-s3c2410/s3c2440-clock.c
...
Greg Kroah-Hartman [Wed, 20 Dec 2006 19:46:03 +0000 (11:46 -0800)]
USB Storage: remove duplicate Nokia entry in unusual_devs.h
How many times are we going to merge this entry...
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jeff Garzik [Wed, 20 Dec 2006 19:37:04 +0000 (14:37 -0500)]
[libata] sata_svw, sata_vsc: kill iomem warnings
Now that iomap merge is close to reality, and since the warnings and
issue have been around so long, we don't need a reminder on every build
that libata needs to be converted over to iomap.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olivier Galibert [Tue, 19 Dec 2006 21:15:25 +0000 (13:15 -0800)]
[PATCH] bluetooth: add support for another Kensington dongle
Add the stupid sco fixup quirk to yet another Broadcom/Kensington device.
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eric Smith [Tue, 19 Dec 2006 21:15:25 +0000 (13:15 -0800)]
[PATCH] usb serial: add support for Novatel S720/U720 CDMA/EV-DO modems
Add USB vendor/device IDs for Novatel Wireless S720 and U720 CDMA/EV-DO
modems to airprime.c.
Signed-off-by: Eric Smith <eric@brouhaha.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Morton [Tue, 19 Dec 2006 21:15:23 +0000 (13:15 -0800)]
[PATCH] USB: Nokia E70 is an unusual device
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=7508
When the Nokia E70 Phone is plugged in to the USB port, I get:
end_request: I/O error, dev sda, sector
1824527
sd 0:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector
1824535
sd 0:0:0:0: SCSI error: return code = 0x10070000
The fix is to add these lines to drivers/usb/storage/unusual_devs.h:
Cc: <honkkis@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tejun Heo [Sun, 17 Dec 2006 01:46:33 +0000 (10:46 +0900)]
[PATCH] libata: take scmd->cmd_len into account when translating SCSI commands
libata depended on SCSI command to have the correct length when
tranlating it into an ATA command. This generally worked for commands
issued by SCSI HLD but user could issue arbitrary broken command using
sg interface.
Also, when building ATAPI command, full command size was always
copied. Because some ATAPI devices needs bytes after CDB cleared, if
upper layer doesn't clear bytes after CDB, such devices will
malfunction. This necessiated recent clear-garbage-after-CDB fix in
sg interfaces. However, scsi_execute() isn't fixed yet and HL-DT-ST
DVD-RAM GSA-H30N malfunctions on initialization commands issued from
SCSI.
This patch makes xlat functions always consider SCSI cmd_len. Each
translation function checks for proper cmd_len and ATAPI translaation
clears bytes after CDB.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Douglas Gilbert <dougg@torque.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Sun, 17 Dec 2006 01:45:57 +0000 (10:45 +0900)]
[PATCH] libata: kill @cdb argument from xlat methods
xlat function will be updated to consider qc->scsicmd->cmd_len and
many xlat functions deference qc->scsicmd already. It doesn't make
sense to pass qc->scsicmd->cmnd as @cdb separately. Kill the
argument.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Sun, 17 Dec 2006 01:45:08 +0000 (10:45 +0900)]
[PATCH] libata: clean up variable name usage in xlat related functions
Variable names in xlat functions are quite confusing now. 'scsicmd'
is used for CDB while qc->scsicmd points to struct scsi_cmnd while
'cmd' is used for struct scsi_cmnd.
This patch cleans up variable names in xlat functions such that 'scmd'
is used for struct scsi_cmnd and 'cdb' for CDB. Also, 'scmd' local
variable is added if qc->scsicmd is used multiple times.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Peer Chen [Wed, 20 Dec 2006 19:18:00 +0000 (14:18 -0500)]
[libata] Move some PCI IDs from sata_nv to ahci
The content of memory map io of BAR5 have been change from MCP65 then
sata_nv can't work fine on the platform based on MCP65 and MCP67, so move
their IDs from sata_nv.c to ahci.c.
Signed-off-by: Peer Chen <pchen@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Adrian Bunk [Tue, 19 Dec 2006 21:01:28 +0000 (13:01 -0800)]
Driver core: proper prototype for drivers/base/init.c:driver_init()
Add a prototype for driver_init() in include/linux/device.h.
Also remove a static function of the same name in drivers/acpi/ibm_acpi.c to
ibm_acpi_driver_init() to fix the namespace collision.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Aneesh Kumar K.V [Tue, 19 Dec 2006 21:01:27 +0000 (13:01 -0800)]
kobject: kobject_uevent() returns manageable value
Since kobject_uevent() function does not return an integer value to
indicate if its operation was completed with success or not, it is worth
changing it in order to report a proper status (success or error) instead
of returning void.
[randy.dunlap@oracle.com: Fix inline kobject functions]
Cc: Mauricio Lin <mauriciolin@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Venkatesh Pallipadi [Tue, 19 Dec 2006 21:01:29 +0000 (13:01 -0800)]
kref refcnt and false positives
With WARN_ON addition to kobject_init()
[ http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19/2.6.19-mm1/dont-use/broken-out/gregkh-driver-kobject-warn.patch ]
I started seeing following WARNING on CPU offline followed by online on my
x86_64 system.
WARNING at lib/kobject.c:172 kobject_init()
Call Trace:
[<
ffffffff8020ab45>] dump_trace+0xaa/0x3ef
[<
ffffffff8020aec4>] show_trace+0x3a/0x50
[<
ffffffff8020b0f6>] dump_stack+0x15/0x17
[<
ffffffff80350abc>] kobject_init+0x3f/0x8a
[<
ffffffff80350be1>] kobject_register+0x1a/0x3e
[<
ffffffff803bbd89>] sysdev_register+0x5b/0xf9
[<
ffffffff80211d0b>] mce_create_device+0x77/0xf4
[<
ffffffff80211dc2>] mce_cpu_callback+0x3a/0xe5
[<
ffffffff805632fd>] notifier_call_chain+0x26/0x3b
[<
ffffffff8023f6f3>] raw_notifier_call_chain+0x9/0xb
[<
ffffffff802519bf>] _cpu_up+0xb4/0xdc
[<
ffffffff80251a12>] cpu_up+0x2b/0x42
[<
ffffffff803bef00>] store_online+0x4a/0x72
[<
ffffffff803bb6ce>] sysdev_store+0x24/0x26
[<
ffffffff802baaa2>] sysfs_write_file+0xcf/0xfc
[<
ffffffff8027fc6f>] vfs_write+0xae/0x154
[<
ffffffff80280418>] sys_write+0x47/0x6f
[<
ffffffff8020963e>] system_call+0x7e/0x83
DWARF2 unwinder stuck at system_call+0x7e/0x83
Leftover inexact backtrace:
This is a false positive as mce.c is unregistering/registering sysfs
interfaces cleanly on hotplug.
kref_put() and conditional decrement of refcnt seems to be the root cause
for this and the patch below resolves the issue for me.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kristen Carlson Accardi [Sat, 16 Dec 2006 23:26:04 +0000 (15:26 -0800)]
acpiphp: Link-time error for PCI Hotplug
I'm seeing:
`acpiphp_glue_exit' referenced in section `.init.text' of
drivers/built-in.o: defined in discarded section `.exit.text' of
drivers/built-in.o
when trying to compile an IA64 kernel with PCI hotplug enabled.
I suggest this patch:
Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kenji Kaneshige [Sat, 16 Dec 2006 23:25:57 +0000 (15:25 -0800)]
shpchp: cleanup shpchp.h
This patch cleans up shpchp.h.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kenji Kaneshige [Sat, 16 Dec 2006 23:25:49 +0000 (15:25 -0800)]
shpchp: remove shpchprm_get_physical_slot_number
This patch removes unnecessary shpchprm_get_physical_slot_number()
function.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kenji Kaneshige [Sat, 16 Dec 2006 23:25:42 +0000 (15:25 -0800)]
shpchp: cleanup struct controller
This patch removes unused/unnecessary members from struct controller.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kenji Kaneshige [Sat, 16 Dec 2006 23:25:34 +0000 (15:25 -0800)]
shpchp: remove unnecessary struct php_ctlr
The struct php_ctlr seems to be only for complicating codes. This
patch removes struct php_ctlr and related codes.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Conke Hu [Tue, 19 Dec 2006 21:11:37 +0000 (13:11 -0800)]
PCI: ATI sb600 sata quirk
Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ralf Baechle [Tue, 19 Dec 2006 21:12:08 +0000 (13:12 -0800)]
PCI legacy resource fix
Since commit
368c73d4f689dae0807d0a2aa74c61fd2b9b075f the kernel will try
to update the non-writeable BAR registers 0..3 of PIIX4 IDE adapters if
pci_assign_unassigned_resources() is used to do full resource assignment of
the bus. This fails because in the PIIX4 these BAR registers have
implicitly assumed values and read back as zero; it used to work because
the kernel used to just write zero to that register the read back value did
match what was written.
The fix is a new resource flag IORESOURCE_PCI_FIXED used to mark a resource
as non-movable. This will also be useful to keep other import system
resources from being moved around - for example system consoles on PCI
busses.
[akpm@osdl.org: cleanup]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adrian Bunk [Tue, 19 Dec 2006 21:12:07 +0000 (13:12 -0800)]
PCI: don't export device IDs to userspace
I don't see any good reason for exporting device IDs to userspace.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jesper Juhl [Mon, 4 Dec 2006 23:14:48 +0000 (15:14 -0800)]
PCI: Be a bit defensive in quirk_nvidia_ck804() so we don't risk dereferencing a NULL pdev.
pci_get_slot() may return NULL if nothing was found. quirk_nvidia_ck804()
does not check the value returned from pci_get_slot(), so it may end up
causing a NULL pointer deref.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Mon, 4 Dec 2006 23:14:45 +0000 (15:14 -0800)]
PCI: Fix multiple problems with VIA hardware
This patch is designed to fix:
- Disk eating corruptor on KT7 after resume from RAM
- VIA IRQ handling
- VIA fixups for bus lockups after resume from RAM
The core of this is to add a table of resume fixups run at resume time.
We need to do this for a variety of boards and features, but particularly
we need to do this to get various critical VIA fixups done on resume.
The second part of the problem is to handle VIA IRQ number rules which
are a bit odd and need special handling for PIC interrupts. Various
patches broke various boxes and while this one may not be perfect
(hopefully it is) it ensures the workaround is applied to the right
devices only.
From: Jean Delvare <khali@linux-fr.org>
Now that PCI quirks are replayed on software resume, we can safely
re-enable the Asus SMBus unhiding quirk even when software suspend support
is enabled.
[akpm@osdl.org: fix const warning]
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Ellerman [Wed, 22 Nov 2006 07:26:22 +0000 (18:26 +1100)]
PCI: Only check the HT capability bits in mpic.c
Only compare the exact HT capability bits against HT_CAPTYPE_IRQ,
this is a little paranoid, but doesn't hurt.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Ellerman [Wed, 22 Nov 2006 07:26:21 +0000 (18:26 +1100)]
PCI: Use pci_find_ht_capability() in drivers/pci/quirks.c
Use pci_find_ht_capability() in drivers/pci/quirks.c.
I'm pretty sure the logic is unchanged here, but someone please eye-ball it
for me. I've changed the message to be a little shorter, it's now:
PCI: Found (enabled|disabled) HT MSI mapping on xxxx:xx:xx.x
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Ellerman [Wed, 22 Nov 2006 07:26:20 +0000 (18:26 +1100)]
PCI: Add #defines for Hypertransport MSI fields
Add a few #defines for grabbing and working with the address fields
in a HT_CAPTYPE_MSI_MAPPING capability. All from the HT spec v3.00.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Ellerman [Wed, 22 Nov 2006 07:26:19 +0000 (18:26 +1100)]
PCI: Use pci_find_ht_capability() in drivers/pci/htirq.c
Use pci_find_ht_capability() in drivers/pci/htirq.c
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Ellerman [Wed, 22 Nov 2006 07:26:18 +0000 (18:26 +1100)]
PCI: Add pci_find_ht_capability() for finding Hypertransport capabilities
There are already several places in the kernel that want to search a PCI
device for a given Hypertransport capability. Although this is possible
using pci_find_capability() etc., it makes sense to encapsulate that
logic in a helper - pci_find_ht_capability().
To cater for searching exhaustively for a capability, we also provide
pci_find_next_ht_capability().
We also need to cater for the fact that the HT capability fields may be
either 3 or 5 bits wide. pci_find_ht_capability() deals with this for you,
but callers using the #defines directly must handle that themselves.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Ellerman [Wed, 22 Nov 2006 07:26:16 +0000 (18:26 +1100)]
PCI: Create __pci_bus_find_cap_start() from __pci_bus_find_cap()
The current implementation of __pci_bus_find_cap() does two things,
first it determines the start of the capability chain for the device,
and then it trys to find the requested capability.
Split these out, so that we can use the two parts independantly in
a subsequent patch. Externally visible behaviour should be unchanged.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Mon, 4 Dec 2006 23:14:44 +0000 (15:14 -0800)]
pci: Introduce pci_find_present
This works like pci_dev_present but instead of returning boolean returns
the matching pci_device_id entry. This makes it much more useful. Code
bloat is basically nil as the old boolean function is rewritten in terms of
the new one.
This will be used by the updated VIA PCI quirks for one
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kenji Kaneshige [Wed, 6 Dec 2006 13:07:30 +0000 (22:07 +0900)]
PCI: pcieport-driver: remove invalid warning message
The following warning message should not be displayed for devices
which don't use an interrupt pin.
pcie_portdrv_probe->Dev[XXXX:XXXX] has invalid IRQ. Check vendor BIOS
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linas Vepstas [Sat, 2 Dec 2006 00:31:27 +0000 (16:31 -0800)]
rpaphp: compiler warning cleanup
This janitorial patch removes the following annoying
compile-time message:
drivers/pci/hotplug/rpaphp_slot.c:57: warning: ignoring return
value of sfs_create_file declared with attribute warn_unused_result
It also fixes a typo, removes some misc crud.
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@us.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Rientjes [Sun, 3 Dec 2006 19:55:34 +0000 (11:55 -0800)]
PCI quirks: remove redundant check
Removes redundant check for dev->subordinate; if it is NULL, the function
returns before the patch-affected code region.
Signed-off-by: David Rientjes <rientjes@cs.washington.edu>
Acked-by: Brice Goglin <brice@myri.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Inaky Perez-Gonzalez [Thu, 30 Nov 2006 23:58:58 +0000 (15:58 -0800)]
pci: add class codes for Wireless RF controllers
pci: add class codes for Wireless RF controllers
Add PCI codes to include/linux/pci_ids.h for RF controllers; first
batch of these devices seem to be the Ultra-Wide-Band and Wireless USB
controllers (WHCI spec).
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Russell King [Wed, 29 Nov 2006 21:18:04 +0000 (21:18 +0000)]
PCI: use /sys/bus/pci/drivers/<driver>/new_id first
Unfortunately, the .../new_id feature does not work with the 8250_pci
driver.
The reason for this comes down to the way .../new_id is implemented.
When PCI tries to match a driver to a device, it checks the modules
static device ID tables _before_ checking the dynamic new_id tables.
When a driver is capable of matching by ID, and falls back to matching
by class (as 8250_pci does), this makes it absolutely impossible to
specify a board by ID, and as such the correct driver_data value to
use with it.
Let's say you have a serial board with vendor 0x1234 and device 0x5678.
It's class is set to PCI_CLASS_COMMUNICATION_SERIAL.
On boot, this card is matched to the 8250_pci driver, which tries to
probe it because it matched using the class entry. The driver finds
that it is unable to automatically detect the correct settings to use,
so it returns -ENODEV.
You know that the information the driver needs is to match this card
using a device_data value of '7'. So you echo 1234 5678 0 0 0 0 7
into new_id.
The kernel attempts to re-bind 8250_pci to this device. However,
because it scans the PCI driver tables, it _again_ matches the class
entry which has the wrong device_data. It fails.
End of story. You can't support the card without rebuilding the
kernel (or writing a specific PCI probe module to support it.)
So, can we make new_id override the driver-internal PCI ID tables?
IOW, like this:
From: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Chris Frey [Sat, 16 Dec 2006 07:37:42 +0000 (02:37 -0500)]
USB: fix to usbfs_snoop logging of user defined control urbs
When sending CONTROL URB's using the usual CONTROL ioctl, logging works
fine, but when sending them via SUBMITURB, like VMWare does, the
control fields are not logged. This patch fixes that.
I didn't see any major changes to devio.c recently, so this patch should apply
cleanly to even the latest kernel. I can resubmit if it doesn't.
From: Chris Frey <cdfrey@foursquare.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Wojtek Kaniewski [Fri, 8 Dec 2006 11:26:00 +0000 (03:26 -0800)]
USB: at91_udc: Additional checks
This patch performs additional checks in at91_udc, just in case of
some spurious interrupts or device enumeration.
Signed-off-by: Wojtek Kaniewski <wojtekka@toxygen.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Wojtek Kaniewski [Fri, 8 Dec 2006 11:23:00 +0000 (03:23 -0800)]
USB: at91_udc: Cleanup variables after failure in usb_gadget_register_driver()
This patch zeroes some variables when usb_gadget_register_driver()
fails. gadgetfs does a dummy registration to get the name of the USB
driver and then waits for user-land driver. If someone plugs the cable
in the meantime, bad things happen, because at91_udc has been left in
inconsistent state.
Signed-off-by: Wojtek Kaniewski <wojtekka@toxygen.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Wojtek Kaniewski [Fri, 8 Dec 2006 17:39:36 +0000 (09:39 -0800)]
USB: at91_udc: allow drivers that support high speed
This patch allows gadget drivers that support high speed (e.g. gadgetfs)
to work properly with at91_udc.
Fix suggested by Milan Svoboda in
http://marc.theaimsgroup.com/?l=linux-usb-devel&m=
115822184711817
Signed-off-by: Wojtek Kaniewski <wojtekka@toxygen.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tony Olech [Wed, 6 Dec 2006 13:16:22 +0000 (13:16 +0000)]
USB: u132-hcd/ftdi-elan: add support for Option GT 3G Quad card
ELAN's U132 is a USB to CardBus OHCI controller adapter,
designed specifically for CardBus 3G data cards to
function in machines without a CardBus slot.
The "ftdi-elan" module is a USB client driver, that detects
a supported CardBus OHCI controller plugged into the
U132 adapter and thereafter provides the conduit for
for access by the "u132-hcd" module.
The "u132-hcd" module is a (cut-down OHCI) host controller
that supports a single OHCI function of the CardBus
card inserted into the U132 adapter.
The problem with the initial implementation is that when
the CardBus card inserted into the U132 adapter has multiple
functions (and a CardBus card can support up to 4 functions),
it was the first function that was arbitrarily choosen.
The first batch of 3G cards tested, like the Merlin Qualcomm
V620, have two functions each supporting a seperate USB OHCI
host controller, of which it was that first function that is
wired up to the 3G modem.
Then along comes the Vodafone Mobile Connect 3G/GPRS data card,
aka "Option GT 3G Quad" as printed on it's rear or "Option N.V.
GlobeTrotter Fusion Quad Lite" as read with "lspci -v". And it
has the meaningful functionality in the second CardBus function.
That presents a problem because it was the "ftdi-elan" module
alone that knows how to communicate to the embedded CardBus slot
and the "u132-hcd" module alone that knows how to access the
pcmcia configuration and CardBus accessible memory space. And
of course, the information about attached (internally hardwired)
devices is contained within USB configuration embedded somewhere
within the CardBus card.
If only the "u132-hcd" module probe() interface could return a
result code that propagated back to the instigating function
platform_device_register() then the "ftdi-elan" module could
try an alternative CardBus function. However in spite of
the recent changes to the drivers/base/ routines that moved
device_attach() from bus_add_device() to bus_attach_device()
both of those routines lose the "failed to attach" 0 result
code and thus the calling routine, namely device_add() is
incapable of propaging the "failed to attach" condition back
to platform_device_add() and consequently back to the caller
of platform_device_register()
Experiments show that patching bus_attach_device() to return
ENODEV fails with the kernel locking up very early during
boot. But, however, if the patch is restricted to calls from
platform_device_add() then it does seem to work.
Unfortunately, until the kernel's drivers/base is properly
modified to propagate -ENODEV back to the caller of
platform_device_register(), it is necessary to "fix" the
"ftdi-elan" module by importing knowledge from the
"u132-hcd" module. This is the reason for the duplicated
functionality introduced in this patch.
Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Victor [Fri, 8 Dec 2006 06:44:38 +0000 (22:44 -0800)]
USB: at91_udc, misc fixes
This is an update to the AT91 USB Device (Gadget) driver.
Adds support for the Atmel AT91SAM9260 and AT91SAM9261 processors. The
only difference is how they handle the pullup pin.
[Patch from Patrice Vilchez]
Need to clear any pending USB Device interrupts before registering the
interrupt handler. The bootloader might have been using the USB Device
port. [Patch from Peer Georgi]
VBUS detection is handled by a GPIO interrupt which only triggers on a
change. Is is therefore necessary to read the current VBUS state
explicitly at startup. [Patch from Peer Georgi]
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Victor [Fri, 8 Dec 2006 06:44:33 +0000 (22:44 -0800)]
USB: at91 udc, support at91sam926x addresses
This is an update to the AT91 USB Device (Gadget) driver.
The base I/O address provided in the platform_device resources is now
ioremap()'ed instead of using a statically mapped memory area. This
helps portability to the newer AT91sam926x processors.
The major change is that we now have to pass a 'struct at91_udc'
parameter to at91_udp_read() and at91_udp_write().
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vitaly Wool [Mon, 9 Oct 2006 08:32:00 +0000 (01:32 -0700)]
USB: OHCI support for PNX8550
OHCI HCD (Host Controller Driver) for USB. Bus Glue for PNX8550.
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Takamasa Ohtake [Thu, 7 Dec 2006 01:04:15 +0000 (17:04 -0800)]
USB: ohci handles hardware faults during root port resets
I have found a problem where the root_port_reset() goes into an infinite
loop and stalls the kernel.
This happens when a hardware fault inside the machine occurs during a small
timing window. In case of USB device connection, if a USB device responds to
hcd_submit_urb(), and later the controller fails before root_port_reset(),
root_port_reset() will loop infinitely because ohci_readl() will always
return "-1". Such a failure can include ejecting a CardBus OHCI controller.
The probability of this problem is low, but it will increase if PnP type
usage is frequent. The attached patch can solve this problem and I believe
that it is better to fix this problem.
Signed-off-by: Takamasa Ohtake <ohtake-txa@necst.nec.co.jp>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Victor [Tue, 5 Dec 2006 11:20:31 +0000 (03:20 -0800)]
USB: ohci at91 warning fix
Remove a warning about an unused variable in the OHCI bus glue for at91.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Tue, 5 Dec 2006 11:18:31 +0000 (03:18 -0800)]
USB: ohci whitespace/comment fixups
This is an OHCI cleanup patch ... it removes a lot of erroneous whitespace
(space before tab, at end of line) as well as the obsolete inline changelog.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Tue, 5 Dec 2006 11:10:08 +0000 (03:10 -0800)]
USB: MAINTAINERS update, EHCI and OHCI
Update maintainer records for two USB host controller drivers. I'm the
main point of contact for both EHCI and OHCI, although I don't have much
time for them any more. Roman hasn't submitted OHCI patches for years.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Tue, 5 Dec 2006 11:15:33 +0000 (03:15 -0800)]
USB: gadget driver unbind() is optional; section fixes; misc
Allow gadget drivers to omit the unbind() method. When they're
statically linked, that's an appropriate memory saving tweak.
Similarly, provide consistent/simpler handling for a should-not-happen
error case: removing a peripheral controller driver when a gadget
driver is still loaded. Such code dates back to early versions of the
first implementation of the gadget API, and has never been triggered.
Includes relevant section annotation fixs for gmidi.c, file_storage.c,
and serial.c; we don't yet have an "init or exit" annotation. Also
some whitespace fixes in gmidi.c (space at EOL, before tabs, etc).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 5 Dec 2006 21:29:55 +0000 (16:29 -0500)]
UHCI: module parameter to ignore overcurrent changes
Certain boards seem to like to issue false overcurrent notifications,
for example on ports that don't have anything connected to them. This
looks like a hardware error, at the level of noise to those ports'
overcurrent input signals (or non-debounced VBUS comparators). This
surfaces to users as truly massive amounts of syslog spam from khubd
(which is appropriate for real hardware problems, except for the
volume from multiple ports).
Using this new "ignore_oc" flag helps such systems work more sanely,
by preventing such indications from getting to khubd (and spamming
syslog). The downside is of course that true overcurrent errors will
be masked; they'll appear as spontaneous disconnects, without the
diagnostics that will let users troubleshoot issues like
short-circuited cables. In addition, controllers with no devices
attached will be forced to poll for new devices rather than relying on
interrupts, since each overcurrent event would generate a new
interrupt.
This patch (as826) is essentially a copy of David Brownell's ignore_oc
patch for ehci-hcd, ported to uhci-hcd.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Morton [Mon, 4 Dec 2006 23:22:40 +0000 (15:22 -0800)]
USB: Nokia E70 is an unusual device
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=7508
When the Nokia E70 Phone is plugged in to the USB port, I get:
end_request: I/O error, dev sda, sector
1824527
sd 0:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector
1824535
sd 0:0:0:0: SCSI error: return code = 0x10070000
The fix is to add these lines to drivers/usb/storage/unusual_devs.h:
Cc: <honkkis@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Burman Yan [Mon, 4 Dec 2006 23:22:40 +0000 (15:22 -0800)]
USB AUERSWALD: replace kmalloc+memset with kzalloc
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ping Cheng [Wed, 6 Dec 2006 01:09:51 +0000 (17:09 -0800)]
USB: fix Wacom Intuos3 4x6 bugs
Fixes Intuos3 4x6 bugs
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Johann Wilhelm [Sat, 2 Dec 2006 06:25:31 +0000 (07:25 +0100)]
usb-gsm-driver: Added VendorId and ProductId for Huawei E220 USB Modem
Added VendorId and ProductId for Huawei E220 USB Modem
Signed-off-by: Johann Wilhelm <johann.wilhelm@student.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Johann Wilhelm [Sat, 2 Dec 2006 06:16:32 +0000 (07:16 +0100)]
usb-storage: Ignore the virtual cd-drive of the Huawei E220 USB Modem
This prevents the kernel from detecting the virtual cd-drive with the
Windows drivers.
Signed-off-by: Johann Wilhelm <johann.wilhelm@student.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Petko Manolov [Mon, 4 Dec 2006 12:27:36 +0000 (14:27 +0200)]
USB: rtl8150 new device id
This one adds another vendor ID to rtl8150 driver. Please apply.
Signed-off-by: Petko Manolov <petkan@nucleusys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jeff Garzik [Mon, 4 Dec 2006 01:53:58 +0000 (20:53 -0500)]
USB: fix ohci.h over-use warnings
When u132-hcd is built, it includes local header ohci.h, which appears
to have been intended only for use by ohci-hcd.
This throws warnings about functions which are defined and not used.
The warnings thrown are because three small functions are implemented in
the header, but not declared 'inline', a rather strange affair.
Since these functions are small, let's go ahead and define them as
'inline', just like the inline functions surrounding them. This makes
things more consistent, and kills the warnings.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Clare [Sat, 2 Dec 2006 02:24:38 +0000 (18:24 -0800)]
USB: Prevent the funsoft serial device from entering raw mode
Added a device specific ioctl function to prevent the disabling of canonical
mode. EINVAL is returned for any TCSETSF ioctl that doesn't have ICANON set.
This patch is for 2.6.17 or later kernels.
When "hwinfo --modem" is executed it opens the funsoft USB serial device and
disables canonical mode. The device is kept this way until hwininfo has
finished probing any modems on a system. The funsoft device expects to be
running in canonical mode. Switching the device to raw mode can cause
incomplete data packets and device timeouts.
Signed-off-by: David Clare <david@funsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Johannes Hoelzl [Sat, 2 Dec 2006 15:54:27 +0000 (16:54 +0100)]
Add Baltech Reader ID to CP2101 driver
this patch adds the Baltech Reader ID to the list of USB IDs in the
CP2101 driver.
From: Johannes Hoelzl <johannes.hoelzl@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Sun, 3 Dec 2006 08:46:35 +0000 (09:46 +0100)]
USB: mutexification of usblp
this patch:
- converts usblp fully to mutex
- makes sleeping interruptible where EINTR can be returned anyway
Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan [Mon, 4 Dec 2006 16:43:01 +0000 (16:43 +0000)]
usb serial: Eliminate bogus ioctl code
Several drivers have bogus ioctl code that tries unneccessarily to
override the standard processing. In the three cases here the actual code
is not only wrong but also not required as they implement the proper
set_termios method as well.
Remove the junk.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Mon, 27 Nov 2006 17:41:30 +0000 (18:41 +0100)]
USB: removing ifdefed code from gl620a
as David has objected to the patch against the gl620a driver,
here's a patch implementing David' suggestion of removing the incomplete
ifdefed code from the gl620a driver.
Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Jan Capek [Tue, 28 Nov 2006 21:35:12 +0000 (22:35 +0100)]
USB: ftdi_sio - MachX product ID added
below is a patch for the ftdi_sio driver to include a new device ID for
CCS MachX PIC programmer.
From: Jan Capek <jan@ccsinfo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eagle Jones [Sat, 25 Nov 2006 00:40:04 +0000 (16:40 -0800)]
USB: airprime: add device id for dell wireless 5500 hsdpa card
Added the device id (0x413c, 0x8115) for the Dell wireless HSDPA 5500,
which is a rebranded Novatel EU730.
Signed-off-by: Eagle Jones <eagle@newdream.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Fri, 24 Nov 2006 11:55:59 +0000 (12:55 +0100)]
USB: fix transvibrator disconnect race
in disconnect you set the interface's private data to NULL. In your IO
methods you unconditionally follow the pointer into never never land.
Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sean Young [Wed, 6 Dec 2006 20:27:32 +0000 (20:27 +0000)]
USB: Fix oops in PhidgetServo
The PhidgetServo causes an Oops when any of its sysfs attributes are read
or written too, making the driver useless.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Morton [Wed, 20 Dec 2006 18:09:10 +0000 (13:09 -0500)]
[libata] pata_via: suspend/resume support fix
Make this array static so it doesn't have to be built at runtime.
Cc: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Andrew Morton [Wed, 20 Dec 2006 18:03:11 +0000 (13:03 -0500)]
[libata] pata_cs5530: suspend/resume support tweak
side-effectful-expression-within-assert give me the creeps.
Cc: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jens Axboe [Wed, 20 Dec 2006 10:06:15 +0000 (11:06 +0100)]
[PATCH] block: document io scheduler allow_merge_fn hook
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Wed, 20 Dec 2006 10:04:12 +0000 (11:04 +0100)]
[PATCH] cfq-iosched: don't allow sync merges across queues
Currently we allow any merge, even if the io originates from different
processes. This can cause really bad starvation and unfairness, if those
ios happen to be synchronous (reads or direct writes).
So add a allow_merge hook to the io scheduler ops, so an io scheduler can
help decide whether a bio/process combination may be merged with an
existing request.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jaroslav Kysela [Wed, 20 Dec 2006 08:11:55 +0000 (09:11 +0100)]
[ALSA] version 1.0.14rc1
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
James Courtier-Dutton [Tue, 12 Dec 2006 17:05:24 +0000 (17:05 +0000)]
[ALSA] ac97: Identify CMI9761 chips.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
James C Georgas [Thu, 7 Dec 2006 07:10:57 +0000 (08:10 +0100)]
[ALSA] ac97_codec - trivial fix for bit update functions
This patch fixes a couple of bit update functions in
alsa-kernel/pci/ac97/ac97_codec.c, which could possibly corrupt bits not
in the given mask.
Specifically, it'll clobber unset bits in the target that are not in the
mask, when the corresponding bit in the given new value is set.
Signed-off-by: James C Georgas <jgeorgas@rogers.com>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
James Courtier-Dutton [Sat, 25 Nov 2006 19:50:11 +0000 (19:50 +0000)]
[ALSA] snd-ca0106: Fix typos.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
James Courtier-Dutton [Sat, 25 Nov 2006 19:42:29 +0000 (19:42 +0000)]
[ALSA] snd-ca0106: Add new card variant.
Fixed ALSA bug#2326
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Akinobu Mita [Thu, 23 Nov 2006 11:03:24 +0000 (12:03 +0100)]
[ALSA] sound: fix PCM substream list
If snd_pcm_new_stream() fails to initalize a substream (if
snd_pcm_substream_proc_init() returns error), snd_pcm_new_stream()
immediately return without unlinking that kfree()d substram.
It causes oops when snd_pcm_free() iterates the list of substream to
free them by invalid reference.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Akinobu Mita [Thu, 23 Nov 2006 11:02:33 +0000 (12:02 +0100)]
[ALSA] sound: initialize rawmidi substream list
If snd_rawmidi_new() failed to allocate substreams for input
(snd_rawmidi_alloc_substreams() failed to populate a
&rmidi->streams[SNDRV_RAWMIDI_STREAM_INPUT]), it will try to
free rawmidi instance by snd_rawmidi_free().
But it will cause oops because snd_rawmidi_free() tries to free
both of substreams list but list for output
(&rmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT]) is not initialized yet.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Nickolay V. Shmyrev [Tue, 21 Nov 2006 17:56:37 +0000 (18:56 +0100)]
[ALSA] snd_hda_intel 3stack mode for ASUS P5P-L2
I have ASUS P5PL2 motherboard and it's embedded sound card requires
the following patch which sets '3stack' model to operate properly:
00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 1043:817f
Flags: bus master, fast devsel, latency 0, IRQ 177
Memory at
dfdf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0
Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 21 Nov 2006 11:14:23 +0000 (12:14 +0100)]
[ALSA] Remove IRQF_DISABLED for shared PCI irqs
Fix IRQ flags for PCI devices.
The shared IRQs for PCI devices shouldn't be allocated with
IRQF_DISABLED. Also, when MSI is enabled, IRQF_SHARED shouldn't
be used.
The patch removes unnecessary cast in request_irq and free_irq,
too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Thu, 16 Nov 2006 14:39:07 +0000 (15:39 +0100)]
[ALSA] Fix invalid assignment of PCI revision
Fix the type of PCI revision to char from int and avoid invalid
assignment with pointer cast.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 14 Nov 2006 12:03:19 +0000 (13:03 +0100)]
[ALSA] Fix races in PCM OSS emulation
Fixed the race among multiple threads accessing the OSS PCM
instance concurrently by simply introducing a mutex for protecting
a setup of the PCM.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Christian Hesse [Wed, 8 Nov 2006 14:50:41 +0000 (15:50 +0100)]
[ALSA] hda-codec - fix typo in PCI IDs
my notebook is a Samsung X11 of course... The attached patch fixes the typo.
Signed-off-by: Christian Hesse <mail@earthworm.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Wed, 8 Nov 2006 14:48:43 +0000 (15:48 +0100)]
[ALSA] ac97 - Fix potential negative array index
Fix the case cidx2 >= 0 and cidx2 < 0 which may result in negative
array index.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 7 Nov 2006 15:10:06 +0000 (16:10 +0100)]
[ALSA] hda-codec - Verbose proc output for PCM parameters
Make the output for PCM parameters more verbose, showing
each rate, bits and format.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 7 Nov 2006 15:09:00 +0000 (16:09 +0100)]
[ALSA] hda-codec - Fix detection of supported sample rates
Don't include 9.6kHz in the list of supported sample rates.
Since this rate isn't indicated in AC_PAR_PCM parameter,
the driver might guess wrongly as if it's available.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 7 Nov 2006 12:48:42 +0000 (13:48 +0100)]
[ALSA] hda-codec - Fix model for ASUS V1j laptop
Add a proper model entry (laptop-eapd) for ASUS V1j laptop with
AD1986A codec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Adrian Bunk [Tue, 7 Nov 2006 12:42:54 +0000 (13:42 +0100)]
[ALSA] sound/core/control.c: remove dead code
This patch removes some obviously dead code spotted by the Coverity
checker.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 24 Oct 2006 12:57:52 +0000 (14:57 +0200)]
[ALSA] hda-codec - Add model for HP q965
Added a model entry (HP_BPC) for HP q965 with ALC262 codec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 23 Oct 2006 14:26:57 +0000 (16:26 +0200)]
[ALSA] pcm core: fix silence_start calculations
The case where silence_size < boundary was broken because different
parts of the snd_pcm_playback_silence() function disagreed about whether
silence_start should point to the start or to the end of the buffer part
to be silenced.
This patch changes the code to always use to the start, which also
simplifies several calculations.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 17 Oct 2006 18:41:38 +0000 (20:41 +0200)]
[ALSA] hda-codec - Fix a typo
Fixed a typo in proc file.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>