OSDN Git Service
Evan Quan [Mon, 17 Feb 2020 10:20:24 +0000 (18:20 +0800)]
drm/amdgpu: drop the non-sense firmware version check on arcturus
As the firmware versions of arcturus are different from other gfx9
ASICs. And the warning("CP firmware version too old, please update!")
caused by this check can be eliminated.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
changzhu [Fri, 14 Feb 2020 02:57:17 +0000 (10:57 +0800)]
drm/amdgpu: add is_raven_kicker judgement for raven1
The rlc version of raven_kicer_rlc is different from the legacy rlc
version of raven_rlc. So it needs to add a judgement function for
raven_kicer_rlc and avoid disable GFXOFF when loading raven_kicer_rlc.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Thu, 13 Feb 2020 07:37:09 +0000 (15:37 +0800)]
drm/amdgpu: record non-zero error counter info in NBIO before resetting GPU
When NBIO's RAS error happens, before trigging GPU reset, it's needed
to record error counter information, which can correct the error counter
value missed issue when reading from debugfs.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Thu, 13 Feb 2020 07:34:06 +0000 (15:34 +0800)]
drm/amdgpu: log on non-zero error conter per IP before GPU reset
Once sync flood interrupt is triggered by RAS error, before
actual GPU recovery job, it's necessary to log on and print
non-zero error counter, this will help user knows where the
RAS error source is from quickly.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nathan Chancellor [Fri, 14 Feb 2020 18:24:39 +0000 (13:24 -0500)]
drm/amd/display: Don't take the address of skip_scdc_overwrite in dc_link_detect_helper
Clang warns:
../drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:980:36:
warning: address of 'sink->edid_caps.panel_patch.skip_scdc_overwrite'
will always evaluate to 'true' [-Wpointer-bool-conversion]
if (&sink->edid_caps.panel_patch.skip_scdc_overwrite)
~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
1 warning generated.
This is probably not what was intended so remove the address of
operator, which matches how skip_scdc_overwrite is handled in the rest
of the driver.
While we're here, drop an extra newline after this if block.
Fixes:
a760fc1bff03 ("drm/amd/display: add monitor patch to disable SCDC read/write")
Link: https://github.com/ClangBuiltLinux/linux/issues/879
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 12 Feb 2020 03:52:20 +0000 (11:52 +0800)]
drm/amd/powerplay: correct the way for checking SMU_FEATURE_BACO_BIT support
Since 'smu_feature_is_enabled(smu, SMU_FEATURE_BACO_BIT)' will always return
false considering the 'smu_system_features_control(smu, false)' disabled
all SMU features.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Wed, 12 Feb 2020 12:07:59 +0000 (15:07 +0300)]
drm/amdgpu: return -EFAULT if copy_to_user() fails
The copy_to_user() function returns the number of bytes remaining to be
copied, but we want to return a negative error code to the user.
Fixes:
030d5b97a54b ("drm/amdgpu: use amdgpu_device_vram_access in amdgpu_ttm_vram_read")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 12 Feb 2020 13:52:32 +0000 (08:52 -0500)]
drm/amdgpu/gfx10: disable gfxoff when reading rlc clock
Otherwise we readback all ones. Fixes rlc counter
readback while gfxoff is active.
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 12 Feb 2020 13:51:29 +0000 (08:51 -0500)]
drm/amdgpu/gfx9: disable gfxoff when reading rlc clock
Otherwise we readback all ones. Fixes rlc counter
readback while gfxoff is active.
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 12 Feb 2020 06:46:16 +0000 (01:46 -0500)]
drm/amdgpu/soc15: fix xclk for raven
It's 25 Mhz (refclk / 4). This fixes the interpretation
of the rlc clock counter.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 12 Feb 2020 04:29:04 +0000 (23:29 -0500)]
drm/amdgpu/display move get_num_odm_splits() into dc_resource.c
It's used by more than just DCN2.0. Fixes missing symbol when
amdgpu is built without DCN support.
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 12 Feb 2020 04:22:04 +0000 (23:22 -0500)]
drm/amdgpu/display: extend DCN guards
to cover dcn2.x related headers.
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 12 Feb 2020 04:21:04 +0000 (23:21 -0500)]
drm/amdgpu/display: extend DCN guard in dal_bios_parser_init_cmd_tbl_helper2
To cover DCN 2.x.
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Wed, 12 Feb 2020 14:33:13 +0000 (09:33 -0500)]
drm/powerplay: Ratelimit PP_ASSERT warnings
In certain situations the message could be reported dozens-to-hundreds of
times, based on how often the function is called.
E.g. If MCLK DPM, any calls to get/set MCLK will result in a failure
message, potentially flooding dmesg. Ratelimit the warnings to avoid
this flood.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 11 Feb 2020 04:39:53 +0000 (12:39 +0800)]
drm/amd/powerplay: always refetch the enabled features status on dpm enablement
Otherwise, the cached dpm features status may be inconsistent under some
case(e.g. baco reset of Navi asic).
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Fri, 7 Feb 2020 15:41:20 +0000 (10:41 -0500)]
drm/amd/display: fix dtm unloading
there was a type in the terminate command.
We should be calling psp_dtm_unload() instead of psp_hdcp_unload()
Fixes:
143f23053333 ("drm/amdgpu: psp DTM init")
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Thu, 6 Feb 2020 20:46:11 +0000 (15:46 -0500)]
drm/amd/display: Fix message for encryption
-msg_in is not needed for enabling encryption.
-Use hdcp2_set_encryption instead of hdcp1_enable_encryption for hdcp2.2
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Thu, 6 Feb 2020 19:26:38 +0000 (14:26 -0500)]
drm/amd/display: fix backwards byte order in rx_caps.
We were using incorrect byte order after we started using the drm_defines
So fix it.
Fixes:
02837a91ae75 ("drm/amd/display: add and use defines from drm_hdcp.h")
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Thu, 19 Sep 2019 20:06:44 +0000 (16:06 -0400)]
drm/amd/display: update HDCP DTM immediately after hardware programming
[why]
HDCP DTM needs to be aware of the upto date display topology
information in order to validate hardware consistency.
[how]
update HDCP DTM on update_stream_config call.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Thu, 17 Oct 2019 15:13:29 +0000 (11:13 -0400)]
drm/amd/display: no hdcp retry if bksv or ksv list is revoked
[why]
According to the specs when bksv or ksv list fails SRM check,
HDCP TX should abort hdcp immediately.
However with the current code HDCP will be reattampt upto 4 times.
[how]
Add the logic that stop HDCP retry if bksv or ksv list
is revoked.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bhawanpreet Lakha [Tue, 3 Dec 2019 20:52:08 +0000 (15:52 -0500)]
drm/amd/display: Handle revoked receivers
[Why]
PSP added a new return code for revoked receivers (SRM). We need to
handle that so we don't retry hdcp
This is already being handled on windows
[How]
Add the enums to psp interface header and handle them.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 11 Oct 2019 01:45:33 +0000 (20:45 -0500)]
drm/amdgpu/runpm: enable runpm on baco capable VI+ asics
Seems to work reliably on VI+ except for a few so enable runpm barring
those where baco for runtime power management is not supported.
[rajneesh] Picked https://patchwork.freedesktop.org/patch/335402/ to
enable runtime pm with baco for kfd. Also fixed a checkpatch warning and
added extra checks for VEGA20 and ARCTURUS.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rajneesh Bhardwaj [Wed, 22 Jan 2020 00:11:03 +0000 (19:11 -0500)]
drm/amdkfd: refactor runtime pm for baco
So far the kfd driver implemented same routines for runtime and system
wide suspend and resume (s2idle or mem). During system wide suspend the
kfd aquires an atomic lock that prevents any more user processes to
create queues and interact with kfd driver and amd gpu. This mechanism
created problem when amdgpu device is runtime suspended with BACO
enabled. Any application that relies on kfd driver fails to load because
the driver reports a locked kfd device since gpu is runtime suspended.
However, in an ideal case, when gpu is runtime suspended the kfd driver
should be able to:
- auto resume amdgpu driver whenever a client requests compute service
- prevent runtime suspend for amdgpu while kfd is in use
This change refactors the amdgpu and amdkfd drivers to support BACO and
runtime power management.
Reviewed-by: Oak Zeng <oak.zeng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rajneesh Bhardwaj [Tue, 21 Jan 2020 19:34:51 +0000 (14:34 -0500)]
drm/amdkfd: show warning when kfd is locked
During system suspend the kfd driver aquires a lock that prohibits
further kfd actions unless the gpu is resumed. This adds some info which
can be useful while debugging.
Reviewed-by: Oak Zeng <oak.zeng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rajneesh Bhardwaj [Mon, 27 Jan 2020 18:47:41 +0000 (13:47 -0500)]
drm/amdgpu: Fix missing error check in suspend
amdgpu_device_suspend might return an error code since it can be called
from both runtime and system suspend flows. Add the missing return code
in case of a failure.
Reviewed-by: Oak Zeng <oak.zeng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
YueHaibing [Mon, 10 Feb 2020 15:08:26 +0000 (23:08 +0800)]
drm/amd/display: Remove set but not unused variable 'stream_status'
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:
In function dcn10_post_unlock_program_front_end:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:2623:29:
warning: variable stream_status set but not used [-Wunused-but-set-variable]
commit
bbf5f6c3f83b ("drm/amd/display: Split program front end part that occur outside lock")
involved this unused variable.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 7 Feb 2020 15:12:31 +0000 (10:12 -0500)]
drm/amdgpu/powerplay: fix baco check for vega20
We need to handle the runpm case as well as GPU reset.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 7 Feb 2020 15:04:37 +0000 (10:04 -0500)]
drm/amdgpu/smu: properly handle runpm/suspend/reset
We need some special handling when using baco vs. other
things.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 7 Feb 2020 14:46:23 +0000 (09:46 -0500)]
drm/amdgpu: add flag for runtime suspend
So we know whether we in are in runtime suspend or
system suspend.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 6 Feb 2020 19:53:06 +0000 (14:53 -0500)]
drm/amdgpu:/navi10: use the ODCAP enum to index the caps array
Rather than the FEATURE_ID flags. Avoids a possible reading past
the end of the array.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reported-by: Aleksandr Mezin <mezin.alexander@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 6 Feb 2020 19:46:34 +0000 (14:46 -0500)]
drm/amdgpu: update smu_v11_0_pptable.h
Update to the latest changes.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xinhui pan [Tue, 11 Feb 2020 01:38:18 +0000 (09:38 +0800)]
drm/amdgpu: Do not move root PT bo to relocated list
As root PD has no parent, we just need move its status to idle.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
CC: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Tue, 11 Feb 2020 04:10:44 +0000 (12:10 +0800)]
drm/amdgpu: correct comment to clear up the confusion
Former comment looks to be one intended behavior in code,
actually it's not. So correct it.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Thu, 19 Dec 2019 06:17:47 +0000 (14:17 +0800)]
drm/amd/powerplay: suppress nonsupport profile mode overrun message
SMU12 not support WORKLOAD_DEFAULT_BIT and WORKLOAD_PPLIB_POWER_SAVING_BIT.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 10 Feb 2020 07:06:35 +0000 (15:06 +0800)]
drm/amd/powerplay: update smu11_driver_if_navi10.h
To pair the latest SMU firmwares.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Tue, 4 Feb 2020 20:49:54 +0000 (15:49 -0500)]
drm/amd/display: DCN2.x Do not program DPPCLK if same value
[WHY]
Programming DPPCLK to the same value currently set may cause
underflow while playing video in certain conditions.
[HOW]
Only program DPPCLK if clock is not the same as the
previous value programmed.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Mon, 3 Feb 2020 14:18:45 +0000 (09:18 -0500)]
drm/amd/display: Use fb_base/fb_offset if available for translation
[Why]
In the case where we do have these passed in then we should be using
these instead of the registers - those are only programmed when booting
the adapter as primary.
[How]
Check if fb_base/fb_offset are non-zero. The value of 0 is invalid
for fb_base but is valid for fb_offset on dGPU.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wyatt Wood [Mon, 20 Jan 2020 20:52:44 +0000 (15:52 -0500)]
drm/amd/display: Add psr get_state call
[Why]
Driver needs to know PSR state.
[How]
Use GPINT to call to firmware and get psr state.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Mon, 20 Jan 2020 19:56:31 +0000 (14:56 -0500)]
drm/amd/display: Don't map ATOM_ENABLE to ATOM_INIT
[Why]
In DCN hardware sequencer we do actually call ATOM_INIT correctly per
pipe. The workaround is not necessary for command table offloading.
[How]
Drop the workaround since it's not needed.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Thu, 30 Jan 2020 23:54:44 +0000 (18:54 -0500)]
drm/amd/display: add monitor patch to disable SCDC read/write
[why]
customer issue: found that for their specific panel, EDID register space
being overwritten during SCDC read write
[how]
customer accepted HDMI 2 features not working - disabled SCDC read/write
as well as HDMI 2 in general based on monitor patch
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dmytro Laktyushkin [Fri, 13 Dec 2019 23:22:40 +0000 (18:22 -0500)]
drm/amd/display: add odm split logic to scaling calculations
Currently odm scaling calculations are only done when adding initial
odm pipe. Any scaling re-calculations will mess up odm because of this.
This change resolves the problem by updating scaling split logic to
handle odm.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Michael Strauss <Michael.Strauss@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Sun, 2 Feb 2020 16:51:54 +0000 (11:51 -0500)]
drm/amd/display: 3.2.72
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nikola Cornij [Tue, 28 Jan 2020 19:05:02 +0000 (14:05 -0500)]
drm/amd/display: Drop unused field from dc_panel_patch
In the struct dc_panel_patch, we have a field named
manage_secondary_link which is not used by any part of the code. This
commit drops the unused field.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Thu, 30 Jan 2020 21:47:45 +0000 (16:47 -0500)]
drm/amd/display: Update register defines
[Why]
Some register defines are redundant or updated
[How]
Update register defines
Remove some redundant defines
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Sun peng Li <Sunpeng.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Peikang Zhang [Thu, 30 Jan 2020 15:49:46 +0000 (10:49 -0500)]
drm/amd/display: Toggle VSR button cause system crash
[Why]
in dcn10_apply_ctx_for_surface(), if we hit !top_pipe_to_program,
pipe_ctx->update_flags could not get cleared.
[How]
Moved clearing pipe_ctx->update_flags logic before if
(!top_pipe_to_program) to gurantee pipe_ctx->update_flags get cleared.
Signed-off-by: Peikang Zhang <peikang.zhang@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Fri, 24 Jan 2020 15:44:20 +0000 (10:44 -0500)]
drm/amd/display: Add backlight support via AUX
Several modern displays support HDR/OLED panel, and one of the
interesting changes provided by this technology is the new approach for
handling backlight. More precisely, in the traditional way, we use PWM
to manage display backlight; however, with HDR/OLED we begin to use DP
Aux channel for adjusting the backlight.
This patch, enable the backlight control in HDR/OLED display via DP Aux.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Tue, 28 Jan 2020 23:01:48 +0000 (18:01 -0500)]
drm/amd/display: Add AUX backlight register
Introduce vendor-specific registers for handling backlight via AUX.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wyatt Wood [Thu, 16 Jan 2020 22:53:09 +0000 (17:53 -0500)]
drm/amd/display: Hookup psr set version call
[Why]
Set version is currently not called.
[How]
Add call to set version from copy settings. This
should be the only time this is called as the eDP
caps should never change.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Calvin Hou [Mon, 27 Jan 2020 19:40:41 +0000 (14:40 -0500)]
drm/amd/display: Pass override OUI in to dc_init_data
[WHY]
Vendor dongle requires propietary OUI and handshake sequence.
[HOW]
Add a new structure to dc_init_data, to allow creator to pass
an override vendor_oui. This value will be written to DP_SOURCE_OUI
instead of AMD signature, when dpcd_set_source_specific_data is
called.
Signed-off-by: Calvin Hou <Calvin.Hou@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wyatt Wood [Wed, 15 Jan 2020 19:16:12 +0000 (14:16 -0500)]
drm/amd/display: Remove unused values from psr struct
[Why]
Taking up unnecessary space.
[How]
Remove unused values from psr struct.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Sat, 18 Jan 2020 20:23:49 +0000 (15:23 -0500)]
drm/amd/display: Don't treat missing command table as failure
[Why]
With the fallback case in place for command table offloading via DMCUB
it's no longer an error for the command table to be missing specific
entries.
[How]
Drop the BREAK_TO_DEBUGGER();
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Tue, 28 Jan 2020 16:58:44 +0000 (11:58 -0500)]
drm/amd/display: always apply T7/T9 delay logic
[why]
before we exit early in edp_reciever_ready if we detect that panel
is not edp or below rev 1.2. This will skip the backlight/t7 delay panel
patch.
[how]
edit logic to ensure panel patch is applied regardless of edp rev.
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Fri, 7 Feb 2020 13:11:00 +0000 (08:11 -0500)]
drm/amdgpu/vcn2.5: fix warning
Fix warning during switching to dpg pause mode for
VCN firmware Version ENC: 1.1 DEC: 1 VEP: 0 Revision: 16
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guchun Chen [Sun, 9 Feb 2020 08:21:09 +0000 (16:21 +0800)]
drm/amdgpu: limit GDS clearing workaround in cold boot sequence
GDS clear workaround will cause gfx failure in suspend/resume case.
[ 98.679559] [drm:amdgpu_device_ip_late_init [amdgpu]] *ERROR* late_init of IP block <gfx_v9_0> failed -110
[ 98.679561] PM: dpm_run_callback(): pci_pm_resume+0x0/0xa0 returns -110
[ 98.679562] PM: Device 0000:03:00.0 failed to resume async: error -110
As this workaround is specific to the HW bug of GDS's ECC error
existing in cold boot up, so bypass this workaround in suspend/
resume case after booting up.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Zhang [Fri, 7 Feb 2020 05:49:02 +0000 (13:49 +0800)]
drm/amdgpu/sriov set driver_table address in VF
With the recent patch to unify VRAM address for driver
table(
a83f82e). VF cannot dump table info any more because
SMU_MSG_SetDriverDramAddrHigh/Low were deleted in the
function of smu_update_table.
Therefore, VF also needs to set driver_table address
in smu_hw_init to fix this regression issue.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 5 Feb 2020 14:45:59 +0000 (15:45 +0100)]
drm/amdgpu: use amdgpu_device_vram_access in amdgpu_ttm_access_memory v2
Make use of the better performance here as well.
This patch is only compile tested!
v2: fix calculation bug pointed out by Felix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 24 Jan 2020 12:58:18 +0000 (13:58 +0100)]
drm/amdgpu: use amdgpu_device_vram_access in amdgpu_ttm_vram_read
This speeds up the access quite a bit from 2.2 MB/s to
2.9 MB/s on 32bit and 12,8 MB/s on 64bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 31 Jan 2020 13:58:05 +0000 (14:58 +0100)]
drm/amdgpu: use the BAR if possible in amdgpu_device_vram_access v2
This should speed up debugging VRAM access a lot.
v2: add HDP flush/invalidate
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 24 Jan 2020 12:12:22 +0000 (13:12 +0100)]
drm/amdgpu: optimize amdgpu_device_vram_access a bit.
Only write the _HI register when necessary.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Thu, 6 Feb 2020 16:57:11 +0000 (11:57 -0500)]
drm/amdgpu: fix amdgpu pmu to use hwc->config instead of hwc->conf
hwc->conf was designated specifically for AMD APU IOMMU purposes. This
could cause problems in performance and/or function since APU IOMMU
implementation is elsewhere. Also hwc->conf and hwc->config are
different members of an anonymous union so hwc->conf aliases as
hw->last_tag.
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Kolesa [Thu, 6 Feb 2020 19:14:35 +0000 (20:14 +0100)]
amdgpu: Prevent build errors regarding soft/hard-float FP ABI tags
On PowerPC, the compiler will tag object files with whether they
use hard or soft float FP ABI and whether they use 64 or 128-bit
long double ABI. On systems with 64-bit long double ABI, a tag
will get emitted whenever a double is used, as on those systems
a long double is the same as a double. This will prevent linkage
as other files are being compiled with hard-float.
On ppc64, this code will never actually get used for the time
being, as the only currently existing hardware using it are the
Renoir APUs. Therefore, until this is testable and can be fixed
properly, at least make sure the build will not fail.
Signed-off-by: Daniel Kolesa <daniel@octaforge.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Wed, 5 Feb 2020 14:20:22 +0000 (09:20 -0500)]
drm/amdgpu/vcn2.5: fix DPG mode power off issue on instance 1
Support pause_state for multiple instance, and it will fix vcn2.5 DPG mode
power off issue on instance 1.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 6 Feb 2020 03:09:25 +0000 (11:09 +0800)]
drm/amd/powerplay: handle features disablement for baco reset in SMU FW
SMU FW will handle the features disablement for baco reset
on Arcturus.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jack Zhang [Wed, 5 Feb 2020 08:34:27 +0000 (16:34 +0800)]
drm/amdgpu/sriov Don't send msg when smu suspend
For sriov and pp_onevf_mode, do not send message to set smu
status, because smu doesn't support these messages under VF.
Besides, it should skip smu_suspend when pp_onevf_mode is disabled.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Takashi Iwai [Thu, 28 Nov 2019 08:27:14 +0000 (09:27 +0100)]
drm/amd/display: Fix wrongly passed static prefix
Currently, gcc spews a warning as:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hubbub.c: In function ‘hubbub1_verify_allow_pstate_change_high’:
./include/drm/drm_print.h:316:2: warning: ‘debug_data’ may be used uninitialized in this function [-Wmaybe-uninitialized]
This is because the code checks against a static value although it's
basically a constant and guaranteed to be set.
This patch changes the type prefix from static to const for addressing
the compile warning above and also for letting the compiler optimize
better.
Fixes:
62d591a8e00c ("drm/amd/display: create new files for hubbub functions")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Amber Lin [Thu, 30 Jan 2020 05:08:05 +0000 (00:08 -0500)]
drm/amdkfd: Add queue information to sysfs
Provide compute queues information in sysfs under /sys/class/kfd/kfd/proc.
The format is /sys/class/kfd/kfd/proc/<pid>/queues/<queue id>/XX where
XX are size, type, and gpuid three files to represent queue size, queue
type, and the GPU this queue uses. <queue id> folder and files underneath
are generated when a queue is created. They are removed when the queue is
destroyed.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joseph Gravenor [Tue, 28 Jan 2020 15:38:22 +0000 (10:38 -0500)]
drm/amd/display: turn off the mst hub before we do detection
[why]
not turning off the mst hub before detection on reboot
causes us to not be able to light up displays with mst hook
[how]
on hw init, see if any displays are lit up. if so, turn them off
Signed-off-by: Joseph Gravenor <joseph.gravenor@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Isabel Zhang [Mon, 27 Jan 2020 15:57:16 +0000 (10:57 -0500)]
drm/amd/display: Add initialitions for PLL2 clock source
[Why]
Starting from 14nm, the PLL is built into the PHY and the PLL is mapped
to PHY on 1 to 1 basis. In the code, the DP port is mapped to a PLL that was not
initialized. This causes DP to HDMI dongle to not light up the display.
[How]
Initializations added for PLL2 when creating resources.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Tue, 28 Jan 2020 08:00:22 +0000 (16:00 +0800)]
drm/amd/display: fix workaround for incorrect double buffer register for DLG ADL and TTU
[Why]
these registers should have been double buffered. SW workaround we will have SW program the more aggressive (lower) values
whenever we are upating this register, so we will not have underflow at expense of less optimzal request pattern.
[How]
there is a driver bug where we don't check for 0, which is uninitialzed HW default. since 0 is smaller than any value we need to program,
driver end up with not programming these registers
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hersen Wu [Tue, 14 Jan 2020 20:39:07 +0000 (15:39 -0500)]
drm/amd/display: linux enable oled panel support dc part
[Why] old panel has been enabled for window driver but not linux.
[How] enable oled panel support for linux. this patch is dc part.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jing Zhou [Tue, 21 Jan 2020 10:05:35 +0000 (18:05 +0800)]
drm/amd/display: external monitor abm enabled in modern standby
[why]
Resume from modern standby, edp stream disabled
but abm keep enabled. External monitor select OTG
source 0 which ABM enabled.
[how]
Disable abm before disable crtc when reset path
mode not call core link disable stream.
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Wed, 15 Jan 2020 19:39:52 +0000 (14:39 -0500)]
drm/amd/display: Add DMUB tracebuffer debugfs
[Why]
The DMUB tracebuffer is useful for understanding DMCUB execution state.
[How]
Add a "show" attribute debugfs so we can loop through the buffer
and print the entries.
The structs for the entry format are defined in the debugfs since
the tracebuffer header no longer exists in the DMUB service.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 27 Jan 2020 15:12:36 +0000 (10:12 -0500)]
drm/amd/display: 3.2.71
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Thu, 23 Jan 2020 21:30:15 +0000 (16:30 -0500)]
drm/amd/display: Limit minimum DPPCLK to 100MHz.
[Why]
Underflow is observed when plug in a 4K@60 monitor with
1366x768 eDP due to DPPCLK is too low.
[How]
Limit minimum DPPCLK to 100MHz.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Galiffi [Tue, 21 Jan 2020 21:29:52 +0000 (16:29 -0500)]
drm/amd/display: Use uint64_t logger_mask instead of uint32_t
[WHY]
enum dc_log_type has more than 32 entries. User cannot set larger entries,
like LOG_DSC. Logs from LOG_GAMMA_DEBUG where being printed even though
flag was not enabled, because dal_logger_should_log check erroneously
passed.
[HOW]
Change struct dal_logger.mask and struct dc_init_data.mask to uint64_t.
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Thu, 23 Jan 2020 20:31:43 +0000 (15:31 -0500)]
drm/amd/display: Add wm ranges to clk_mgr
[WHY & HOW]
Having watermark ranges saved inside clk_mgr to be
available for debug at all times would be useful.
Add it to the clk_mgr_internal struct for reference.
Only populated for Renoir, unused for other asics.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Wed, 22 Jan 2020 14:24:40 +0000 (09:24 -0500)]
drm/amd/display: Check hyperV flag in DC.
[Why]
hyperV flag should be passed from dm to DC, and override the
nv12 flip workaround flag.
[How]
Add flag to phy address config struct and pass the value in dm.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Mon, 20 Jan 2020 17:56:43 +0000 (12:56 -0500)]
drm/amd/display: fix inputting clk lvl into dml for RN
[Why]
Previous logic is only good for 15W parts. Other configuration
need a smarter logic to match clk levels with pp table in the fuse.
[How]
Cache all 8 DPM level's clock data, find lvl that match each pstate
in the pp table and build input into DML base on that
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wenjing Liu [Wed, 22 Jan 2020 16:54:54 +0000 (11:54 -0500)]
drm/amd/display: decouple global lock out of pipe control lock
[why]
hwss should not guess what type of pipe lock is needed.
The caller of the lock function should know
the right type of pipe lock.
Decouple the setup of global lock outside of pipe control lock
logic.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Wed, 22 Jan 2020 03:50:13 +0000 (22:50 -0500)]
drm/amd/display: Check engine is not NULL before acquiring
[Why]
Engine can be NULL in some cases, so we must not acquire it.
[How]
Check for NULL engine before acquiring.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Mon, 20 Jan 2020 23:58:45 +0000 (18:58 -0500)]
drm/amd/display: Use dcfclk to populate watermark ranges
[WHY & HOW]
Previously drain clk was unconstrained and fill clk was constrained on fclk.
We want to change it to fill clk unconstrained and drain clock constrained
to dcfclk.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Fri, 10 Jan 2020 19:52:49 +0000 (14:52 -0500)]
drm/amd/display: add stream_enc_inst for PSP HDCP inst use
[why]
new HW engine mapping requirment use in PSP
[how]
report stream_enc_inst
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Peikang Zhang [Wed, 15 Jan 2020 20:45:10 +0000 (15:45 -0500)]
drm/amd/display: Update hubbub description comment
Description for DCHUBBUB_TEST_DEBUG_DATA is changed to avoid any future confusions.
Signed-off-by: Peikang Zhang <peikang.zhang@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Thu, 30 Jan 2020 20:43:07 +0000 (15:43 -0500)]
drm/amd/display: remove early break in interdependent_lock
[Why]
The break in apply_ctx_interdependent_lock() may potentially
lead to early break from the loop leaving update plane unlocked
[How]
Remove break
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Peikang Zhang [Mon, 20 Jan 2020 14:25:15 +0000 (09:25 -0500)]
drm/amd/display: dc_get_vmid_use_vector() crashes when get called
[Why]
int i can go out of boundary which will cause crash
[How]
Fixed the maximum value of i to avoid i going out of boundary
Signed-off-by: Peikang Zhang <peikang.zhang@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 20 Jan 2020 13:15:27 +0000 (08:15 -0500)]
drm/amd/display: 3.2.70
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Sun, 19 Jan 2020 03:50:59 +0000 (22:50 -0500)]
drm/amd/display: remove unused variable
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Sat, 18 Jan 2020 19:03:55 +0000 (14:03 -0500)]
drm/amd/display: Fix GSL acquire
[Why]
After locking refactor GSL is not acquired properly
resulting in immediate flip issues.
[How]
Do not copy old GSL state anymore since GSL is acquired
earlier now.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Tue, 14 Jan 2020 22:04:24 +0000 (17:04 -0500)]
drm/amd/display: Added locking for atomic update stream and update planes
[Why]
Screen flickering when HDR switches between FP16 and ARGB2101010
[How]
Moved pipe_control_lock so stream update and plane update occur atomically
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Lucy Li <lucy.li@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Thu, 16 Jan 2020 14:16:18 +0000 (09:16 -0500)]
drm/amd/display: Wait for clean shutdown in DMCUB reset
[Why]
The DMCUB may be currently executing commands when the reset is
triggered.
Before issuing a reset we should first wait for the DMCUB to finish
its work.
[How]
Send the GPINT command for halting the firmware before reset.
Get the ack for the command then wait for the scratch register to
become the correct value.
We want this to take under ~40us or so at most before we force reset
to cover PHY delay sequence max time.
Each register read will be at least ~1-3us so don't bother using udelay.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas [Wed, 15 Jan 2020 20:17:29 +0000 (15:17 -0500)]
drm/amd/display: Add GPINT handler interface
[Why]
The General Purpose Interrupt is used on the DMCUB to pass lightweight
commands via a register to the DMCUB.
This is limited to 32-bit command and 32-bit response.
This will be used for shutting down the firmware in a clean manner.
[How]
Add the command IDs and the data register to correctly format
the commands.
Add the interface functions to dmub_srv for sending and receiving the
commands.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Wed, 15 Jan 2020 19:41:23 +0000 (14:41 -0500)]
drm/amd/display: Fix various issues found by compiler warning as errors
[Why]
Diagnostics team reported various issues found when enabling warnings as errors
[How]
Fix implicit conversions
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Tue, 14 Jan 2020 22:02:09 +0000 (17:02 -0500)]
drm/amd/display: Indicate dsc updates explicitly
[Why]
DSC updates only set type to FULL UPDATE, but doesn't
flag the change
[How]
Add DSC flag update flag
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Tue, 14 Jan 2020 21:23:31 +0000 (16:23 -0500)]
drm/amd/display: Split program front end part that occur outside lock
[Why]
Eventually want to lock at a higher level in stack.
To do this, we need to be able to isolate the parts that need to be done
after pipe unlock.
[How]
Split out programming that is done post unlock.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Wed, 15 Jan 2020 16:55:06 +0000 (11:55 -0500)]
drm/amd/display: Do not set optimized_require to false after plane disable
[WHY]
The optimized_require flag is needed to set watermarks and clocks lower
in certain conditions. This flag is set to true and then set to false
while programming front end in dcn20.
[HOW]
Do not set the flag to false while disabling plane.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Tue, 14 Jan 2020 18:56:08 +0000 (13:56 -0500)]
drm/amd/display: Fix psr static frames calculation
[Why]
Driver crash with psr feature enabled due to divide-by-zero error.
This is a regression after rework to calculate static screen frame
number entry time.
[How]
Correct order of operations to avoid divide-by-zero.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joseph Gravenor [Wed, 15 Jan 2020 18:27:06 +0000 (13:27 -0500)]
drm/amd/display: remove invalid dc_is_hw_initialized function
[why/how]
We found out that the register we read actually gets reset by SMU
after we loose power, meaning this always returns true
Signed-off-by: Joseph Gravenor <joseph.gravenor@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
George Shen [Tue, 14 Jan 2020 22:11:15 +0000 (17:11 -0500)]
drm/amd/display: Move USB-C workaround to after parameter variables are set
[Why]
The call to dp_enable_link_phy are using default/invalid values for clock id
and link settings.
[How]
Move workaround code to after its parameter variables are determined.
Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wyatt Wood [Thu, 9 Jan 2020 19:29:13 +0000 (14:29 -0500)]
drm/amd/display: Add set psr version message
[Why]
Must know psr version during runtime.
[How]
Add set psr version message structures.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Mon, 23 Dec 2019 08:51:42 +0000 (16:51 +0800)]
drm/amdgpu: move xgmi init/fini to xgmi_add/remove_device call (v2)
For sriov, psp ip block has to be initialized before
ih block for the dynamic register programming interface
that needed for vf ih ring buffer. On the other hand,
current psp ip block hw_init function will initialize
xgmi session which actaully depends on interrupt to
return session context. This results an empty xgmi ta
session id and later failures on all the xgmi ta cmd
invoked from vf. xgmi ta session initialization has to
be done after ih ip block hw_init call.
to unify xgmi session init/fini for both bare-metal
sriov virtualization use scenario, move xgmi ta init
to xgmi_add_device call, and accordingly terminate xgmi
ta session in xgmi_remove_device call.
The existing suspend/resume sequence will not be changed.
v2: squash in return fix from Nirmoy
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>