git.osdn.net Git - tomoyo/tomoyo-test1.git/log

RDMA/hns: Remove redundant type cast for general pointers

There is no need to do a type cast on genernal pointers, they could be
assigned to any type of variables. In addition, optimize initialization of
some variables and adjust order of them.

Link: https://lore.kernel.org/r/1590152579-32364-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Optimize the usage of MTR

Currently, the MTR region is configed before hns_roce_mtr_map() is
invoked, but in some scenarios, the region is configed at MTR creation,
the caller need to store this config and call hns_roce_mtr_map() later. So
optimize the usage by wrapping the MTR region config into MTR.

Link: https://lore.kernel.org/r/1589982799-28728-10-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Refactor the QP context filling process related to WQE buffer configure

Split the code related to WQE buffer configure from the QPC filling
process into two functions: config_qp_sq_buf() and config_qp_rq_buf(),
this will make the code more readable.

Link: https://lore.kernel.org/r/1589982799-28728-9-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Change variables representing quantity to unsigned

Number of sge/eqe is always non-negative, they should be defined in type
of unsigned.

Link: https://lore.kernel.org/r/1589982799-28728-8-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Change all page_shift to unsigned

page_shift is used to calculate the page size, it's always non-negative,
and should be in type of unsigned.

Link: https://lore.kernel.org/r/1589982799-28728-7-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Rename QP buffer related function

Rename the function related to QP buffer to make the code more readable.

Link: https://lore.kernel.org/r/1589982799-28728-6-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Remove unused code about assert

The codes related to assert are no longer used and need to be deleted.

Link: https://lore.kernel.org/r/1589982799-28728-5-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Optimize post and poll process

Add unlikely() and likely() to optimize main I/O process code.

Link: https://lore.kernel.org/r/1589982799-28728-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Add CQ flag instead of independent enable flag

It's easier to understand and maintain enable flags of cq using a single
field in type of u32 than defining a field for every flags in the
structure hns_roce_cq, and we can add new flags for features more
conveniently in the future.

Link: https://lore.kernel.org/r/1589982799-28728-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Let software PI/CI grow naturally

The hardware can truncate PI/CI when posting or polling, the driver does
not need to do truncation. Therefore keep the software's PI/CI consistent
with it in the hardware.

Link: https://lore.kernel.org/r/1589982799-28728-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: Get rid of the do_next_path while_next_path macros

The macros do_each_path/while_each_path lead to a smatch warning:

drivers/infiniband/ulp/rtrs/rtrs-clt.c:1196 rtrs_clt_failover_req() warn: inconsistent indenting
drivers/infiniband/ulp/rtrs/rtrs-clt.c:2890 rtrs_clt_request() warn: inconsistent indenting

Also checkpatch complains:
ERROR: Macros with multiple statements should be enclosed in a do - while loop

The macros are used only in two places: for a normal IO path and for the
failover path triggered after errors.

Get rid of the macros and just use a for loop iterating over the list of
paths in both places. It is easier to read and also less lines of code.

Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20200522053924.528980-1-danil.kipnis@cloud.ionos.com
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: server: Use already dereferenced rtrs_sess structure

The rtrs_sess structure has already been extracted above from the
rtrs_srv_sess structure. Use that to avoid redundant dereferencing.

Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20200522082833.1480551-1-haris.phnx@gmail.com
Signed-off-by: Md Haris Iqbal <haris.phnx@gmail.com>
Acked-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rnbd: Fix compilation error when CONFIG_MODULES is disabled

module_is_live function is only defined when CONFIG_MODULES is enabled.
Use try_module_get instead to check whether the module is being removed.

When module unload and manuall unmapping is happening in parallel, we can
try removing the symlink twice: rnbd_client_exit
vs. rnbd_clt_unmap_dev_store.

This is probably not the best way to deal with this race in general, but
for now this fixes the compilation issue when CONFIG_MODULES is disabled
and has no functional impact. Regression tests passed.

Fixes: 1eb54f8f5dd8 ("block/rnbd: client: sysfs interface functions")
Link: https://lore.kernel.org/r/20200521185909.457245-1-danil.kipnis@cloud.ionos.com
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/cma: Fix ports memory leak in cma_configfs

The allocated ports structure in never freed. The free function should be
called by release_cma_ports_group, but the group is never released since
we don't remove its default group.

Remove default groups when device group is deleted.

Fixes: 045959db65c6 ("IB/cma: Add configfs for rdma_cm")
Link: https://lore.kernel.org/r/20200521072650.567908-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

block/rnbd: Fix an IS_ERR() vs NULL check in find_or_create_sess()

The alloc_sess() function returns error pointers, it never returns NULL.

Fixes: f7a7a5c228d4 ("block/rnbd: client: main functionality")
Link: https://lore.kernel.org/r/20200519120347.GD42765@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/uverbs: Introduce create/destroy QP commands over ioctl

Introduce create/destroy QP commands over the ioctl interface to let it
be extended to get an asynchronous event FD.

Link: https://lore.kernel.org/r/20200519072711.257271-8-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/uverbs: Introduce create/destroy WQ commands over ioctl

Introduce create/destroy WQ commands over the ioctl interface to let it
be extended to get an asynchronous event FD.

Link: https://lore.kernel.org/r/20200519072711.257271-7-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/uverbs: Introduce create/destroy SRQ commands over ioctl

Introduce create/destroy SRQ commands over the ioctl interface to let it
be extended to get an asynchronous event FD.

Link: https://lore.kernel.org/r/20200519072711.257271-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/uverbs: Move QP, SRQ, WQ type and flags to UAPI

These constants are going to be used in the ioctl interface in coming
patches so they are part of the UAPI, place them in the correct header
for clarity.

Link: https://lore.kernel.org/r/20200519072711.257271-5-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/uverbs: Extend CQ to get its own asynchronous event FD

Extend CQ to get its own asynchronous event FD.
The event FD is an optional attribute, in case wasn't given the ufile
event FD will be used.

Link: https://lore.kernel.org/r/20200519072711.257271-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/uverbs: Refactor related objects to use their own asynchronous event FD

Refactor related objects to use their own asynchronous event FD.
The ufile event FD will be the default in case an object won't have its own
event FD.

Link: https://lore.kernel.org/r/20200519072711.257271-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Allow the ioctl layer to abort a fully created uobject

While creating a uobject every create reaches a point where the uobject is
fully initialized. For ioctls that go on to copy_to_user this means they
need to open code the destruction of a fully created uobject - ie the
RDMA_REMOVE_DESTROY sort of flow.

Open coding this creates bugs, eg the CQ does not properly flush the
events list when it does its error unwind.

Provide a uverbs_finalize_uobj_create() function which indicates that the
uobject is fully initialized and that abort should call to destroy_hw to
destroy the uobj->object and related.

Methods can call this function if they go on to have error cases after
setting uobj->object. Once done those error cases can simply do return,
without an error unwind.

Link: https://lore.kernel.org/r/20200519072711.257271-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Merge tag 'v5.7-rc6' into rdma.git for-next

Linux 5.7-rc6

Conflict in drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
resolved by deleting dr_cq_event, matching how netdev resolved it.

Required for dependencies in the following patches.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Enable the transmit side of the datagram ipoib netdev

This patch hooks the transmit side of the datagram netdev with
ipoib by setting the rdma_netdev_get_params function for the
hfi1 ib_device_ops structue. It also enables the receiving side
by adding the AIP capability into the default capabilities.

Link: https://lore.kernel.org/r/20200511160712.173205.65700.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Piotr Stankiewicz <piotr.stankiewicz@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/ipoib: Add capability to switch between datagram and connected mode

This is the prerequisite modification to the ipoib ulp to allow a
rdma netdev to obtain the default ndo ops for init/uninit/open/close.

This is accomplished by setting the netdev ops field within the
callback function passed to the netdev allocation routine which
in turn was passed into the rdma netdev allocation routine.

This allows the rdma netdev to call back into the ulp to create the
resources required for connected mode operation.

Additionally as the ulp is not re-entrant, when switching modes,
the number of real tx queues is set to 1 for the connected mode.

For datagram mode the number of real tx queues is set to the
actual number of tx queues specified at the netdev's allocation.

For the internal ulp netdev the number of tx queues defaults to 1.

It is up to the rdma netdev to specify the actual number it can support.

When the driver does not support a rdma netdev for acceleration,
(-ENOTSUPPORTED return code or the verbs function for allocation is
NULL) the ipoib ulp functions are unaffected by using the internal
netdev allocated by the ipoib ulp.

Link: https://lore.kernel.org/r/20200511160706.173205.19086.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Add packet histogram trace event

Add a simple trace event taking context number and building simple
histogram to print packets distribution between contexts.

Link: https://lore.kernel.org/r/20200511160700.173205.84270.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/{hfi1, ipoib, rdma}: Broadcast ping sent packets which exceeded mtu size

When in connected mode ipoib sent broadcast pings which exceeded the mtu
size for broadcast addresses.

Add an mtu attribute to the rdma_netdev structure which ipoib sets to its
mcast mtu size.

The RDMA netdev uses this value to determine if the skb length is too long
for the mtu specified and if it is, drops the packet and logs an error
about the errant packet.

Link: https://lore.kernel.org/r/20200511160655.173205.14546.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Activate the dummy netdev

As described in earlier patches, ipoib netdev will share receive
contexts with existing VNIC netdev through a dummy netdev. The
following changes are made to achieve that:
- Set up netdev receive contexts after user contexts. A function is
  added to count the available netdev receive contexts.
- Add functions to set/get receive map table free index.
- Rename NUM_VNIC_MAP_ENTRIES as NUM_NETDEV_MAP_ENTRIES.
- Let the dummy netdev own the receive contexts instead of VNIC.
- Allocate the dummy netdev when the hfi1 device is added and free it
  when the device is removed.
- Initialize AIP RSM rules when the IpoIb rxq is initialized and
  remove the rules when it is de-initialized.
- Convert VNIC to use the dummy netdev.

Link: https://lore.kernel.org/r/20200511160649.173205.4626.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Add rx functions for dummy netdev

This patch adds the rx functions for the dummy netdev:
- Functions to allocate/free the dummy netdev.
- Functions to allocate/free receiving contexts for the netdev.
- Functions to initialize/de-initialize the receive queue.
- Functions to enable/disable the receive queue.

Link: https://lore.kernel.org/r/20200511160643.173205.75087.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Add interrupt handler functions for accelerated ipoib

This patch adds the interrupt handler function, the NAPI poll
function, and its associated helper functions for receiving
accelerated ipoib packets. While we are here, fix the formats
of two error printouts.

Link: https://lore.kernel.org/r/20200511160637.173205.64890.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Add functions to receive accelerated ipoib packets

Ipoib netdev will share receive contexts with existing VNIC netdev.
To achieve that, a dummy netdev is allocated with hfi1_devdata to
own the receive contexts, and ipoib and VNIC netdevs will be put
on top of it. Each receive context is associated with a single
NAPI object.

This patch adds the functions to receive incoming packets for
accelerated ipoib.

Link: https://lore.kernel.org/r/20200511160631.173205.54184.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Rename num_vnic_contexts as num_netdev_contexts

Rename num_vnic_contexts as num_ndetdev_contexts since VNIC and ipoib
will share the same set of receive contexts.

Link: https://lore.kernel.org/r/20200511160625.173205.53306.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/ipoib: Increase ipoib Datagram mode MTU's upper limit

Currently the ipoib UD mtu is restricted to 4K bytes. Remove this
limitation so that the IPOIB module can potentially use an MTU (in UD
mode) that is bounded by the MTU of the underlying device. A field is
added to the ib_port_attr structure to indicate the maximum physical
MTU the underlying device supports.

Link: https://lore.kernel.org/r/20200511160618.173205.23053.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: RSM rules for AIP

This is implementation of RSM rule for AIP packets.
AIP rule will use rule RSM2 and will match standard
Infiniband packet containg BTH (LNH==BTH) and
having Dest QPN prefixed with value 0x81. Spread between
receive contexts will be done using source QPN bits.

VNIC and AIP will share receive contexts, so their rules
will point to the same RMT entries and their shared
code is moved to separate functions.
If any of the rules is active RMT mapping will be skipped
for latter.

Changed function hfi1_vnic_is_rsm_full to be more general
and moved it from main header to chip.c.

Changed the order of RSM rules because AIP rule as
more specific one is needed to be placed before more
general QOS rule. Rules are occupying two last RSM
registers.

Link: https://lore.kernel.org/r/20200511160612.173205.73002.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/{rdmavt, hfi1}: Implement creation of accelerated UD QPs

Adds capability to create a qpn to be recognized as an accelerated
UD QP for ipoib.

This is accomplished by reserving 0x81 in byte[0] of the qpn as the
prefix for these qp types and reserving qpns between 0x810000 and
0x81ffff.

The hfi1 capability mask already contained a flag for the VNIC netdev.
This has been renamed and extended to include both VNIC and ipoib.

The rvt code to allocate qps now recognizes this flag and sets 0x81
into byte[0] of the qpn.

The code to allocate qpns is modified to reset the qpn numbering when it
is detected that a value is located in byte[0] for a UD QP and it is a
qpn being requested for net dev use. If it is a regular UD QP then it is
allowable to have bits set in byte[0] of the qpn and provide the
previously normal behavior.

The code to free the qpn now checks for the AIP prefix value of 0x81 and
removes it from the qpn before being freed so that the lower 16 bit
number can be reused.

This patch requires minor changes in the IB core and ipoib to facilitate
the creation of accelerated UP QPs.

Link: https://lore.kernel.org/r/20200511160607.173205.11757.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Remove module parameter for KDETH qpns

The module parameter for KDETH qpns is being removed in favor
of always using the default value of 0x80 as the qpn prefix.
Defines have been added for various KDETH values including
the prefix of 0x80.
The reserved range now starts at the base value for KDETH
qpns (0x80) and extends up to and including the last qpn for
other reserved QP prefixed types.
Adjust other QP prefixed define names to match KDETH defined
names.

Link: https://lore.kernel.org/r/20200511160600.173205.27508.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Add the transmit side of a datagram ipoib RDMA netdev

This implements the transmit side of the multiple transmit queue RDMA
netdev used to accelerate ipoib. The receive side remains the ipoib
internal implementation.

The init/unint/open/stop netdev operations are saved off and called by the
versions within the hfi1 netdev in order to initialize the connected mode
resources present in ipoib thus allowing us to switch modes between
datagram and connected.

The datagram queue pair instantiated by the ipoib ulp is used by this
implementation for its queue pair number and to register with multicast.

The above queue pair is not used on transmit other than its qpn as the
verbs layer is skipped and packets are directly submitted to the sdma
engines.

Link: https://lore.kernel.org/r/20200511160554.173205.1369.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Add functions to transmit datagram ipoib packets

This patch implements the mechanism to accelerate the transmit side of
a multiple transmit queue RDMA netdev by submitting the packets to
the SDMA engine directly instead of sending through the verbs layer.

This patch also changes the UD/SEND_ONLY op to output the entropy value
in byte 0 of deth[1]. UD/SEND_ONLY_WITH_IMMEDIATE uses the previous
behavior with no entropy value being output.

The code in the ipoib rdma netdev which submits tx requests upon
successful submission will call trace_sdma_output_ibhdr to output
the ibhdr to the trace buffer.

Link: https://lore.kernel.org/r/20200511160548.173205.45616.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Add accelerated IP capability bit

The accelerated IP capability bit is added to allow users to control
which feature is enabled and disabled.

Link: https://lore.kernel.org/r/20200511160541.173205.96870.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/efa: Report host information to the device

The host info feature allows the driver to infrom the EFA device
firmware with system configuration for debugging and troubleshooting
purposes.

The host info buffer is passed as an admin command DMA mapped control
buffer, and is unmapped and freed once the command CQE is consumed.

Currently, the setting of host info is done for each device on its
probe. Failing to set the host info for the device shall not disturb the
probe flow, any errors will be discarded.

Link: https://lore.kernel.org/r/20200512152204.93091-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/efa: Fix setting of wrong bit in get/set_feature commands

When using a control buffer the ctrl_data bit should be set in order to
indicate the control buffer address is valid, not ctrl_data_indirect
which is used when the control buffer itself is indirect.

Fixes: e9c6c5373088 ("RDMA/efa: Add common command handlers")
Link: https://lore.kernel.org/r/20200512152204.93091-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/mlx5: Add init2init as a modify command

Missing INIT2INIT entry in the list of modify commands caused DEVX
applications to be unable to modify_qp for this transition state. Add the
MLX5_CMD_OP_INIT2INIT_QP opcode to the list of allowed DEVX opcodes.

Fixes: e662e14d801b ("IB/mlx5: Add DEVX support for modify and query commands")
Link: https://lore.kernel.org/r/20200513095550.211345-1-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Reserve one sge in order to avoid local length error

When rq/srq sge length is smaller than sq sge length, it will produce a
local length error and may cause the bus to hang. Therefore, for rq wqe
and srq wqe, one reserved sge pointing to a reserved mr is used to avoid
this error.

Link: https://lore.kernel.org/r/1588931159-56875-10-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Rename macro for defining hns hardware page size

Rename the PAGE_ADDR_SHIFT as HNS_HW_PAGE_SHIFT to make code more
readable.

Link: https://lore.kernel.org/r/1588931159-56875-9-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Remove redundant memcpy()

srq_context is a local variables and is only used to get some fields from
buffer of mailbox. It's meaningless to copy mailbox's buffer's contents
back to it.

Link: https://lore.kernel.org/r/1588931159-56875-8-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Store mr len information into mr obj

The length information should be stored in the struct ib_mr object,
otherwise the length value of a valid mr object would always be 0.

Link: https://lore.kernel.org/r/1588931159-56875-7-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Fix error with to_hr_hem_entries_count()

For ilog2(x), if x is 0 and not a constant variable, it will return
-1. And there will be an error as below:

hns3 0000:7d:00.0 hns_0: Local work queue 0x8 catast error, sub_event type is: 2

So modify to_hr_hem_entries_shift() to return 0 if conut is 0.

Fixes: 54d6638765b0 ("RDMA/hns: Optimize WQE buffer size calculating process")
Link: https://lore.kernel.org/r/1588931159-56875-6-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Fix wrong assignment of SRQ's max_wr

srq's attribute max_wr should be 1 less than the total count of wqe.

Fixes: ffb1308b88b6 ("RDMA/hns: Move SRQ code to the reasonable place")
Link: https://lore.kernel.org/r/1588931159-56875-5-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Fix assignment to ba_pg_sz of eqe

When allocating eq buffer, the size of base address page should be defined
by eqe_ba_pg_sz instead of srqwqe_ba_pg_sz.

Fixes: 477a0a387072 ("RDMA/hns: Optimize 0 hop addressing for EQE buffer")
Link: https://lore.kernel.org/r/1588931159-56875-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Fix cmdq parameter of querying pf timer resource

The firmware has reduced the number of descriptions of command
HNS_ROCE_OPC_QUERY_PF_TIMER_RES to 1. The driver needs to adapt, otherwise
the hardware will report error 4(CMD_NEXT_ERR).

Fixes: 0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/1588931159-56875-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Bugfix for querying qkey

The qkey queried through the query ud qp verb is a fixed value and it
should be read from qp context.

Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1588931159-56875-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/siw: Replace one-element array and use struct_size() helper

The current codebase makes use of one-element arrays in the following
form:

struct something {
    int length;
    u8 data[1];
};

struct something *instance;

instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);

but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.

Also, make use of the new struct_size() helper to properly calculate the
size of struct siw_pbl.

This issue was found with the help of Coccinelle and, audited and fixed
_manually_.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Link: https://lore.kernel.org/r/20200519233018.GA6105@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rnbd/rtrs: Pass max segment size from blk user to the rdma library

When Block Device Layer is disabled, BLK_MAX_SEGMENT_SIZE is undefined.
The rtrs is a transport library and should compile independently of the
block layer. The desired max segment size should be passed down by the
user.

Introduce max_segment_size parameter for the rtrs_clt_open() call.

Fixes: f7a7a5c228d4 ("block/rnbd: client: main functionality")
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Fixes: cb80329c9434 ("RDMA/rtrs: client: private header with client structs and functions")
Fixes: b5c27cdb094e ("RDMA/rtrs: public interface header to establish RDMA connections")
Link: https://lore.kernel.org/r/20200519111419.924170-1-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: server: Fix some error return code

Fix to return negative error code -ENOMEM from the some error handling
cases instead of 0, as done elsewhere in this function.

Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Fixes: 91b11610af8d ("RDMA/rtrs: server: sysfs interface functions")
Link: https://lore.kernel.org/r/20200519091912.134358-1-weiyongjun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: client: Fix function return on success

Remove the if-statement and return the value contained in _err_,
unconditionally.

Link: https://lore.kernel.org/r/20200519163612.GA6043@embeddedor
Addresses-Coverity-ID: 1493753 ("Identical code for different branches")
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: Fix a couple off by one bugs in rtrs_srv_rdma_done()

These > comparisons should be >= to prevent accessing one element beyond
the end of the buffer.

Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20200519154525.GA66801@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: Fix some signedness bugs in error handling

The problem is that "req->sg_cnt" is an unsigned int so if "nr" is
negative, it gets type promoted to a high positive value and the condition
is false. This patch fixes it by handling negatives separately.

Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20200519133223.GN2078@kadam
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/srpt: Fix disabling device management

Avoid disabling device management for devices that don't support
Management datagrams (MADs) by checking if the "mad_agent" pointer is
initialized before calling ib_modify_port, also fix the error flow in
srpt_refresh_port() to disable device management if
ib_register_mad_agent() fail.

Fixes: 09f8a1486dca ("RDMA/srpt: Fix handling of SR-IOV and iWARP ports")
Link: https://lore.kernel.org/r/20200514114720.141139-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/mlx5: Update mlx5_ib driver name

Current description doesn't include new devices, change it by updating to
have more generic description and remove DRIVER_NAME and DRIVER_VERSION
defines.

Link: https://lore.kernel.org/r/20200513095304.210240-1-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/srpt: Add a newline when printing parameter 'srpt_service_guid' by sysfs

When I cat module parameter 'srpt_service_guid', it displays as follows.
It is better to add a newline for easy reading.

[root@hulk-202 ~]# cat /sys/module/ib_srpt/parameters/srpt_service_guid
0x0205cdfffe8346b9[root@hulk-202 ~]#

Link: https://lore.kernel.org/r/1589182629-27743-1-git-send-email-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Consolidate ib_create_srq flows

The uverbs layer largely duplicate the code in ib_create_srq(), with the
slight difference that it passes in a udata. Move all the code together
into ib_create_srq_user() and provide an inline for kernel users, similar
to other create calls.

Link: https://lore.kernel.org/r/20200506082444.14502-6-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/uverbs: Fix create WQ to use the given user handle

Fix create WQ to use the given user handle, in addition dropped some
duplicated code from this flow.

Fixes: fd3c7904db6e ("IB/core: Change idr objects to use the new schema")
Fixes: f213c0527210 ("IB/uverbs: Add WQ support")
Link: https://lore.kernel.org/r/20200506082444.14502-9-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/uverbs: Cleanup wq/srq context usage from uverbs layer

Both wq_context and srq_context are some leftover from the past in uverbs
layer, they are not really in use, drop them.

Link: https://lore.kernel.org/r/20200506082444.14502-5-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Merge tag 'for-linus-5.7-2' of git://github.com/cminyard/linux-ipmi

Pull IPMI update from Corey Minyard:
"Convert i2c_new_device() to i2c_new_client_device()

  Wolfram Sang has asked to have this included in 5.7 so the deprecated
  API can be removed next release. There should be no functional
  difference.

  I think that entire this section of code can be removed; it is
  leftover from other things that have since changed, but this is the
  safer thing to do for now. The full removal can happen next release"

* tag 'for-linus-5.7-2' of git://github.com/cminyard/linux-ipmi:
  char: ipmi: convert to use i2c_new_client_device()

MAINTAINERS: Add maintainers for RNBD/RTRS modules

Danil and I will maintain RNBD/RTRS modules.

Link: https://lore.kernel.org/r/20200511135131.27580-26-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

block/rnbd: a bit of documentation

README with description of major sysfs entries, sysfs documentation
are moved to ABI dir as Bart suggested.

Link: https://lore.kernel.org/r/20200511135131.27580-25-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

block/rnbd: include client and server modules into kernel compilation

Add rnbd Makefile, Kconfig and also corresponding lines into upper block
layer files.

Link: https://lore.kernel.org/r/20200511135131.27580-24-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

block/rnbd: server: sysfs interface functions

This is the sysfs interface to rnbd mapped devices on server side:

  /sys/class/rnbd-server/ctl/devices/<device_name>/
    |- block_dev
    |  *** link pointing to the corresponding block device sysfs entry
    |
    |- sessions/<session-name>/
    |  *** sessions directory
       |
       |- read_only
       |  *** is devices mapped as read only
       |
       |- mapping_path
          *** relative device path provided by the client during mapping

Link: https://lore.kernel.org/r/20200511135131.27580-23-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

block/rnbd: server: functionality for IO submitting to block dev

This provides helper functions for IO submitting to block dev.

Link: https://lore.kernel.org/r/20200511135131.27580-22-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

block/rnbd: server: main functionality

This is main functionality of rnbd-server module, which handles RTRS
events and rnbd protocol requests, like map (open) or unmap (close)
device. Also server side is responsible for processing incoming IBTRS IO
requests and forward them to local mapped devices.

Link: https://lore.kernel.org/r/20200511135131.27580-21-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

block/rnbd: server: private header with server structs and functions

This header describes main structs and functions used by rnbd-server
module, namely structs for managing sessions from different clients and
mapped (opened) devices.

Link: https://lore.kernel.org/r/20200511135131.27580-20-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

block/rnbd: client: sysfs interface functions

This is the sysfs interface to rnbd block devices on client side:

  /sys/class/rnbd-client/ctl/
    |- map_device
    |  *** maps remote device
    |
    |- devices/
       *** all mapped devices

  /sys/block/rnbd<N>/rnbd/
    |- unmap_device
    |  *** unmaps device
    |
    |- state
    |  *** device state
    |
    |- session
    |  *** session name
    |
    |- mapping_path
       *** path of the dev that was mapped on server

Link: https://lore.kernel.org/r/20200511135131.27580-19-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

block/rnbd: client: main functionality

This is main functionality of rnbd-client module, which provides interface
to map remote device as local block device /dev/rnbd<N> and feeds RTRS
with IO requests.

Link: https://lore.kernel.org/r/20200511135131.27580-18-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

block/rnbd: client: private header with client structs and functions

This header describes main structs and functions used by rnbd-client
module, mainly for managing RNBD sessions and mapped block devices,
creating and destroying sysfs entries.

Link: https://lore.kernel.org/r/20200511135131.27580-17-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

block/rnbd: private headers with rnbd protocol structs and helpers

These are common private headers with rnbd protocol structures, logging,
sysfs and other helper functions, which are used on both client and server
sides.

Link: https://lore.kernel.org/r/20200511135131.27580-16-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: a bit of documentation

README with description of major sysfs entries, sysfs documentation has
been moved to ABI dir as suggested by Bart.

Link: https://lore.kernel.org/r/20200511135131.27580-15-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: include client and server modules into kernel compilation

Add rtrs Makefile, Kconfig and also corresponding lines into upper layer
infiniband/ulp files.

Link: https://lore.kernel.org/r/20200511135131.27580-14-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: server: sysfs interface functions

This is the sysfs interface to rtrs sessions on server side:

  /sys/class/rtrs-server/<SESS-NAME>/
    *** rtrs session accepted from a client peer
    |
    |- paths/<SRC@DST>/
       *** established paths from a client in a session
       |
       |- disconnect
       |  *** disconnect path
       |
       |- hca_name
       |  *** HCA name
       |
       |- hca_port
       |  *** HCA port
       |
       |- stats/
          *** current path statistics
          |
  |- rdma

Link: https://lore.kernel.org/r/20200511135131.27580-13-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: server: statistics functions

This introduces set of functions used on server side to account statistics
of RDMA data sent/received.

Link: https://lore.kernel.org/r/20200511135131.27580-12-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: server: main functionality

This is main functionality of rtrs-server module, which accepts set of
RDMA connections (so called rtrs session), creates/destroys sysfs entries
associated with rtrs session and notifies upper layer
(user of RTRS API) about RDMA requests or link events.

Link: https://lore.kernel.org/r/20200511135131.27580-11-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: server: private header with server structs and functions

This header describes main structs and functions used by rtrs-server
module, mainly for accepting rtrs sessions, creating/destroying sysfs
entries, accounting statistics on server side.

Link: https://lore.kernel.org/r/20200511135131.27580-10-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: client: statistics functions

This introduces set of functions used on client side to account statistics
of RDMA data sent/received, amount of IOs inflight, latency, cpu
migrations, etc. Almost all statistics are collected using percpu
variables.

Link: https://lore.kernel.org/r/20200511135131.27580-8-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: client: main functionality

This is main functionality of rtrs-client module, which manages set of
RDMA connections for each rtrs session, does multipathing, load balancing
and failover of RDMA requests.

Link: https://lore.kernel.org/r/20200511135131.27580-7-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: client: private header with client structs and functions

This header describes main structs and functions used by rtrs-client
module, mainly for managing rtrs sessions, creating/destroying sysfs
entries, accounting statistics on client side.

Link: https://lore.kernel.org/r/20200511135131.27580-6-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: core: lib functions shared between client and server modules

This is a set of library functions existing as a rtrs-core module, used by
client and server modules.

Mainly these functions wrap IB and RDMA calls and provide a bit higher
abstraction for implementing of RTRS protocol on client or server sides.

Link: https://lore.kernel.org/r/20200511135131.27580-5-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: private headers with rtrs protocol structs and helpers

These are common private headers with rtrs protocol structures, logging,
sysfs and other helper functions, which are used on both client and server
sides.

Link: https://lore.kernel.org/r/20200511135131.27580-4-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rtrs: public interface header to establish RDMA connections

Introduce public header which provides set of API functions to establish
RDMA connections from client to server machine using RTRS protocol, which
manages RDMA connections for each session, does multipathing and load
balancing.

Main functions for client (active) side:

rtrs_clt_open() - Creates set of RDMA connections incapsulated
                    in IBTRS session and returns pointer on RTRS
    session object.
rtrs_clt_close() - Closes RDMA connections associated with RTRS
                     session.
rtrs_clt_request() - Requests zero-copy RDMA transfer to/from
                       server.

Main functions for server (passive) side:

rtrs_srv_open() - Starts listening for RTRS clients on specified
                    port and invokes RTRS callbacks for incoming
    RDMA requests or link events.
rtrs_srv_close() - Closes RTRS server context.

Link: https://lore.kernel.org/r/20200511135131.27580-3-danil.kipnis@cloud.ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

sysfs: export sysfs_remove_file_self()

Function is going to be used in transport over RDMA module in subsequent
patches, so export it to GPL modules.

Link: https://lore.kernel.org/r/20200511135131.27580-2-danil.kipnis@cloud.ionos.com
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: linux-kernel@vger.kernel.org
[jwang: extend the commit message]
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"Some more clk driver fixes and one core framework fix:

   - A handful of TI driver fixes for bad of_node_put() and incorrect
     parent names

   - Rockchip rk3228 aclk_gpu* creation was interfering with lima GPU
     work so we use a composite clk now

   - Resuming from suspend on Tegra Jetson TK1 was broken because an
     audio PLL calculated an incorrect rate

   - A fix for devicetree probing on IM-PD1 by actually specifying a clk
     name which is required to pass clk registration

   - Avoid list corruption if registration fails for a critical clk"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: ti: clkctrl: convert subclocks to use proper names also
  clk: ti: am33xx: fix RTC clock parent
  clk: ti: clkctrl: Fix Bad of_node_put within clkctrl_get_name
  clk: tegra: Fix initial rate for pll_a on Tegra124
  clk: impd1: Look up clock-output-names
  clk: Unlink clock if failed to prepare or enable
  clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks

Merge tag 'usb-5.7-rc6' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are a number of USB fixes for 5.7-rc6

  The "largest" in here is a bunch of raw-gadget fixes and api changes
  as the driver just showed up in -rc1 and work has been done to fix up
  some uapi issues found with the original submission, before it shows
  up in a -final release.

  Other than that, a bunch of other small USB gadget fixes, xhci fixes,
  some quirks, andother tiny fixes for reported issues.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  USB: gadget: fix illegal array access in binding with UDC
  usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B
  USB: usbfs: fix mmap dma mismatch
  usb: host: xhci-plat: keep runtime active when removing host
  usb: xhci: Fix NULL pointer dereference when enqueuing trbs from urb sg list
  usb: cdns3: gadget: make a bunch of functions static
  usb: mtu3: constify struct debugfs_reg32
  usb: gadget: udc: atmel: Make some symbols static
  usb: raw-gadget: fix null-ptr-deref when reenabling endpoints
  usb: raw-gadget: documentation updates
  usb: raw-gadget: support stalling/halting/wedging endpoints
  usb: raw-gadget: fix gadget endpoint selection
  usb: raw-gadget: improve uapi headers comments
  usb: typec: mux: intel: Fix DP_HPD_LVL bit field
  usb: raw-gadget: fix return value of ep read ioctls
  usb: dwc3: select USB_ROLE_SWITCH
  usb: gadget: legacy: fix error return code in gncm_bind()
  usb: gadget: legacy: fix error return code in cdc_bind()
  usb: gadget: legacy: fix redundant initialization warnings
  usb: gadget: tegra-xudc: Fix idle suspend/resume
  ...

Merge branch 'exec-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull execve fix from Eric Biederman:
"While working on my exec cleanups I found a bug in exec that I
  introduced by accident a couple of years ago. I apparently missed the
  fact that bprm->file can change.

  Now I have a very personal motive to clean up exec and make it more
  approachable.

  The change is just moving woud_dump to where it acts on the final
  bprm->file not the initial bprm->file. I have been careful and tested
  and verify this fix works"

* 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  exec: Move would_dump into flush_old_exec

Merge tag 'objtool-urgent-2020-05-17' of git://git./linux/kernel/git/tip/tip

Pull x86 stack unwinding fix from Thomas Gleixner:
"A single bugfix for the ORC unwinder to ensure that the error flag
  which tells the unwinding code whether a stack trace can be trusted or
  not is always set correctly.

  This was messed up by a couple of changes in the recent past"

* tag 'objtool-urgent-2020-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Fix error handling in __unwind_start()

Merge tag 'x86_urgent_for_v5.7-rc7' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Borislav Petkov:
"A single fix for early boot crashes of kernels built with gcc10 and
stack protector enabled"

* tag 'x86_urgent_for_v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix early boot crash on gcc-10, third try

exec: Move would_dump into flush_old_exec

I goofed when I added mm->user_ns support to would_dump.  I missed the
fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and
binfmt_script bprm->file is reassigned.  Which made the move of
would_dump from setup_new_exec to __do_execve_file before exec_binprm
incorrect as it can result in would_dump running on the script instead
of the interpreter of the script.

The net result is that the code stopped making unreadable interpreters
undumpable.  Which allows them to be ptraced and written to disk
without special permissions.  Oops.

The move was necessary because the call in set_new_exec was after
bprm->mm was no longer valid.

To correct this mistake move the misplaced would_dump from
__do_execve_file into flos_old_exec, before exec_mmap is called.

I tested and confirmed that without this fix I can attach with gdb to
a script with an unreadable interpreter, and with this fix I can not.

Cc: stable@vger.kernel.org
Fixes: f84df2a6f268 ("exec: Ensure mm->user_ns contains the execed files")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Merge tag '5.7-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Three small cifs/smb3 fixes, one for stable"

* tag '5.7-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix leaked reference on requeued write
  cifs: Fix null pointer check in cifs_read
  CIFS: Spelling s/EACCESS/EACCES/

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"A new testcase for guest debugging (gdbstub) that exposed a bunch of
  bugs, mostly for AMD processors. And a few other x86 fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce
  KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c
  KVM: SVM: Disable AVIC before setting V_IRQ
  KVM: Introduce kvm_make_all_cpus_request_except()
  KVM: VMX: pass correct DR6 for GD userspace exit
  KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6
  KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6
  KVM: nSVM: trap #DB and #BP to userspace if guest debugging is on
  KVM: selftests: Add KVM_SET_GUEST_DEBUG test
  KVM: X86: Fix single-step with KVM_SET_GUEST_DEBUG
  KVM: X86: Set RTM for DB_VECTOR too for KVM_EXIT_DEBUG
  KVM: x86: fix DR6 delivery for various cases of #DB injection
  KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly

Merge tag 'powerpc-5.7-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- A fix for unrecoverable SLB faults in the interrupt exit path,
   introduced by the recent rewrite of interrupt exit in C.

- Four fixes for our KUAP (Kernel Userspace Access Prevention) support
   on 64-bit. These are all fairly minor with the exception of the
   change to evaluate the get/put_user() arguments before we enable user
   access, which reduces the amount of code we run with user access
   enabled.

- A fix for our secure boot IMA rules, if enforcement of module
   signatures is enabled at runtime rather than build time.

- A fix to our 32-bit VDSO clock_getres() which wasn't falling back to
   the syscall for unknown clocks.

- A build fix for CONFIG_PPC_KUAP_DEBUG on 32-bit BookS, and another
   for 40x.

Thanks to: Christophe Leroy, Hugh Dickins, Nicholas Piggin, Aurelien
Jarno, Mimi Zohar, Nayna Jain.

* tag 'powerpc-5.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/40x: Make more space for system call exception
  powerpc/vdso32: Fallback on getres syscall when clock is unknown
  powerpc/32s: Fix build failure with CONFIG_PPC_KUAP_DEBUG
  powerpc/ima: Fix secure boot rules in ima arch policy
  powerpc/64s/kuap: Restore AMR in fast_interrupt_return
  powerpc/64s/kuap: Restore AMR in system reset exception
  powerpc/64/kuap: Move kuap checks out of MSR[RI]=0 regions of exit code
  powerpc/64s: Fix unrecoverable SLB crashes due to preemption check
  powerpc/uaccess: Evaluate macro arguments once, before user access is allowed

Merge tag 'csky-for-linus-5.7-rc6' of git://github.com/c-sky/csky-linux

Pull csky updates from Guo Ren:

- fix for copy_from/to_user (a hard-to-find bug, thx Viro)

- fix for calltrace panic without FRAME_POINT

- two fixes for perf

- two build fixes

- four fixes for non-fatal bugs (msa, rm dis_irq, cleanup psr,
   gdbmacros.txt)

* tag 'csky-for-linus-5.7-rc6' of git://github.com/c-sky/csky-linux:
  csky: Fixup raw_copy_from_user()
  csky: Fixup gdbmacros.txt with name sp in thread_struct
  csky: Fixup remove unnecessary save/restore PSR code
  csky: Fixup remove duplicate irq_disable
  csky: Fixup calltrace panic
  csky: Fixup perf callchain unwind
  csky: Fixup msa highest 3 bits mask
  csky: Fixup perf probe -x hungup
  csky: Fixup compile error for abiv1 entry.S
  csky/ftrace: Fixup error when disable CONFIG_DYNAMIC_FTRACE